Answer:
Explanation:
The polarity of the 3 compounds would be in the order of
Ferrocene < Acetylferrocene < Diacetylferrocene
Your TLC data has to also support this observation . This can be checked by measuring the values of Rf ( Retention factor = distance travelled by solute/solvent ) .The Rf values also has to follow this particular order: -
Ferrocene > acetylferrocene > diacetylferrocene
2) Hexane happens to be a non-polar solvent. The polarity of hexane can be increased if some polar solvents for example, ethyl and methylene chloride etc are added
Therefore, in the increasing order of solvents polarity, we have
Hexane < 1:1 mixture of hexane: methylene chloride < 9:1 mixture of methylene chloride:
3) Chromatographic techniques all have a stationary phase in addition to a mobile phase. In the case of column chromatography, the silica gel will be the stationary phase and the solvent that will be poured will be the mobile phase.
4) The TLC and column chromatography both happen to have the same stationary phase which is the silica gel. Also, the same solvent mixture is used in both the techniques. This makes the result of the 2 to be almost the same. The difference seen between them is that, TLC works against the gravity while on the other hand column chromatography works in the direction of the gravity.
5) The key feature in the IR spectra of the acetylferrocene that will be absent in the spectra of ferrocene is the presence of carbonyl stretching frequency at close to 1700 per cm(cm-1). This peak is easily differentiated between both acetyl ferrocene and ferrocene.
A teacher is giving a lecture on the changes in world population over the last decade. Which is the best visual aid for
the teacher to use?
O a bar graph
O a map
• a line graph
O a diagram
Answer:
The correct answer would be C.) a line graph
Explanation:
I just did the assignment on edge 2020 and got it right
Answer the questions about the characteristics of the elements in group 2 (the alkaline earth metals).1. What happens when the elements in group 2 react with iodine? a. a salt is formed (MI_2) b. a salt is formed (MI) c. no reaction 2. How do they react with water? a. hydrogen gas is released b. oxygen is released 3. How do they react with oxygen? a. an oxide is formed (M_2 O) b. an oxide is formed (MO) c. no reaction 4. Which reacts the most vigorously? a. Ba b. Mg c. Ca d. Sr e. Ba 5. Which element in the group is the most metallic in character? a. Be b. Mg c. Ca d. Sr e. Ba
Answer:
Explanation:
1
When elements in group 2 react with Iodine, a salt MI_2 is formed
2
When they react with water, Hydrogen gas is released
3
When they react with Oxygen, an Oxide, MO is formed
4
The most vigorously reactive metal in group 2 is Barium, Ba. Reactivity increases as one moves downward in group 2
5
The most metallic element is Barium, Ba. This is because in the periodic table, metallic strength of metals increases as one moves down the table.
The thing that happens when the elements in group 2 react with iodine is:
A salt MI_2 is formed
The way these elements react with water is:
They form hydrogen gasThe way they react with oxygen is:
They produce an Oxide, MO
The element which reacts the most vigorously in group 2 is:
Barium, Ba. This is because their reactivity increases as one moves downward in group 2
The element in the group which is the most metallic in character is:
Barium, Ba. It is this way because of the changes in metallic strength as metals change positions in the tableRead more here:
https://brainly.com/question/16377112
A mixture of two gases with a total pressure of 2.00 atm contains 0.70 atm of Gas A. What is the partial pressure of Gas B in atm?
The partial pressure of Gas B : 1.3 atm
Further explanationDalton's Law stated
the total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases
Can be formulated:
[tex]\tt P~tot=P1+P2+P3...Pn[/tex]
P tot = 2 atm
P gas A = 0.7 atm
So P gas B :
[tex]\tt P~gas~B=P~tot-P~gas~A\\\\P~gas~B=2-0.7=1.3~atm[/tex]
The partial pressure of Gas B in the mixture of two gases has been 1.3 atm.
The partial pressure of the gas can be defined as the pressure of the particular gas in the mixture of gases.
According to dalton, the total pressure of the gas has been the sum of the partial pressure of the individual gases.
Thus, total pressure = partial pressure of gas A + partial pressure of gas B
Given, total pressure = 2 atm
The partial pressure of gas A = 0.70 atm
So, the partial pressure of Gas B = total pressure - partial pressure of gas A
The partial pressure of Gas B = 2.0 atm - 0.70 atm
The partial pressure of Gas B = 1.3 atm
Thus, the partial pressure of Gas B in the mixture of two gases has been 1.3 atm.
For more information about the partial pressure, refer to the link:
https://brainly.com/question/8408970
A solution of acetic acid is prepared in water by adding 11.1 g of sodium acetate to a volumetric flask and bringing the volume to 1.0 L with water. The final pH is measured to be 5.25. What are the concentrations of acetate and acetic acid in solution? (Assume that the temperature of the solution is 25 degrees Celsius)
Answer:
Molarity acetate: 0.1353M
Molarity acetic acid: 0.0418M
Explanation:
When in solution you have a weak acid (Acetic acid) and its conjugate base (sodium acetate) a buffer is produced. The pH of this buffer is obtained using the H-H equation:
pH = pKa + log [A⁻] / [HA]
Where pH is pH of the solution = 5.25
pKa is pKa of acetic buffer = 4.74
[A⁻] is molarity of acetate ion - Molar mass sodium acetate: 82.03g/mol-:
11.1g * (1mol / 82.03g) = 0.1353moles A⁻ / 1.0L = 0.1353M
And [HA] are moles of acetic acid.
Solving for HA:
5.25 = 4.74 + log [0.1353] / [HA]
0.51 = log [0.1353] / [HA]
3.236 = [0.1353] / [HA]
[HA] = 0.1353M / 3.236
[HA] = 0.0418M
Write the condensed electron configurations for the follow- ing atoms and indicate how many unpaired electrons each has: (a) Mg, (b) Ge, (c) Br, (d) V, (e) Y, (f) Lu.
Answer:
i think it is ge
Explanation:
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the condensed electron configurations for the given element can be written as below.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.
The systematic distribution of electrons in the various atomic orbitals is called its electronic configuration. 1,2,3 represents the number of shells and s and represents the orbitals. The superscripts represents the number of electrons in each orbitals.
Electronic configuration of Mg Ne 3s²
Electronic configuration of Ge [Ar] 3d¹⁰ 4s² 4p²
Electronic configuration of Br [Ar] 3d10 4s² 4p⁵
Electronic configuration of V [Ar] 3d³ 4s²
Electronic configuration of Y [ Kr ]4d¹ 5s²
Electronic configuration of Lu [Xe] 4f¹⁴ 5d¹6s²
Therefore, the condensed electron configurations for the given element can be written as above.
To know more about element, here:
brainly.com/question/8460633
#SPJ2
What is the change in the internal energy of a system that does 100 joules of
work and absorbs 1,000 joules of heat?
Answer:900j
Explanation:
Are transition metals reactive?
Answer: Yes
Explanation:
Please help me on question #2 please please really need help due today at 9:00pm please
What is the Dependent variable?
Explanation:
Just like an independent variable, a dependent variable is exactly what it sounds like. It is something that depends on other factors. For example, a test score could be a dependent variable because it could change depending on several factors such as how much you studied, how much sleep you got the night before you took the test, or even how hungry you were when you took it. Usually when you are looking for a relationship between two things you are trying to find out what makes the dependent variable change the way it does.
Heat is a form of energy transfer from a blank location
Heat is a form of energy and transfer of it takes place from hotter body to cooler body.
What is heat transfer?Heat transfer is a process in which heat transfers from one object to another object without any loss.
Heat transfer is a branch of thermal engineering that deals with the production, use, conversion, and transfer of thermal energy between physical systems.
Transfer of heat generally takes place from hotter body to the cooler body till when both the bodies gain the same temperature.
Hence heat transfers from hotter body to cooler body.
To know more about heat transfer, visit the below link:
https://brainly.com/question/16055406
#SPJ2
what is filtration??
Answer:
the action or process of filtering something.
Explanation:
Filtration is a physical, biological or chemical operation that separates solid matter and fluid from a mixture with a filter medium that has a complex structure through which only the fluid can pass.
Larry was told that a certain muscle cream was the newest best thing on the market and claims to double a person’s muscle power when used as part of a muscle-building workout. Interested in this product, he buys the special muscle cream and recruits Patrick and SpongeBob to help him with an experiment. Larry develops a special marshmallow weight-lifting program for Patrick and SpongeBob. He meets with them once every day for a period of 2 weeks and keeps track of their results. Before each session Patrick’s arms and back are lathered in the muscle cream, while Sponge Bob’s arms and back are lathered with the regular lotion.
Which person is the control group?
SpongeBob
SpongeBob
Patrick
Patrick
Larry
If 15.5 mL of 0.225 M aqueous magnesium chloride is added to 37.5 mL of 0.250 M aqueous lead(II) nitrate, then what mass of lead(II) chloride precipitates?A. 0.485 g.B. 0.971 g.C. 1.94 g.D. 3.888 g.E. 5.82 8 g.
Answer:
B. 0.971 g
Explanation:
When MgCl₂(aq) reacts with Pb(NO₃)₂(aq), PbCl₂(s) and Mg(NO₃)₂(aq) are produced:
MgCl₂(aq) + Pb(NO₃)₂(aq) →, PbCl₂(s) + Mg(NO₃)₂(aq)
Thus, we need to find imiting reactant finding moles of each reactant:
Moles MgCl₂:
15.5mL = 0.0155L * (0.225 mol / L) = 3.49x10⁻³ moles
Moles Pb(NO₃)₂:
37.5mL = 0.0375L * (0.250mol / L) = 9.38x10⁻³ moles
As the ratio of the reactants is 1:1, the moles of PbCl₂ are 3.48x10⁻³ moles.
We need to convert thes moles to mass using molar mass of PbCl₂ (278.1g/mol), thus:
3.48x10⁻³ moles * (278.1g/mol) =
0.968g of PbCl₂ are precipitate
Thus, right answer is:
B. 0.971 gShow by calculation which process produces more energy per gram of material reacting
I need help click the image please help
Answer:
Answer:
a plant cell
Explanation:
because the chrolopast is green
Explanation:
What is The compound with the formula SiCl4
Answer:
silicon tetrachloride or tetrachlorosilane
Does a reaction occur when aqueous solutions of ammonium carbonate and chromium(III) nitrate are combined? yesno If a reaction does occur, write the net ionic equation. Use the solubility rules provided in the OWL Preparation Page to determine the solubility of compounds. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed leave it blank.
Answer:
3 CO₃²⁻(aq) + 2 Cr³⁺(aq) ⇒ Cr₂(CO₃)₃(s)
Explanation:
Let's consider the molecular equation that occurs when aqueous solutions of ammonium carbonate and chromium(III) nitrate are combined.
3 (NH₄)₂CO₃(aq) + 2 Cr(NO₃)₃(aq) ⇒ 6 NH₄NO₃(aq) + Cr₂(CO₃)₃(s)
The complete ionic equation includes all the ions and insoluble species.
6 NH₄⁺(aq) + 3 CO₃²⁻(aq) + 2 Cr³⁺(aq) + 6 NO₃⁻(aq) ⇒ 6 NH₄⁺(aq) + 6 NO₃⁻(aq) + Cr₂(CO₃)₃(s)
The net ionic equation includes only the ions that participate in the reaction and the insoluble species.
3 CO₃²⁻(aq) + 2 Cr³⁺(aq) ⇒ Cr₂(CO₃)₃(s)
Unit Test Unit Test Active 13 TIME REMAINING 01:31:26 Chemical A and Chemical B react in an exothermic reaction. What can be known about what will happen when Chemical A and Chemical B are mixed together? O The new substance will need more energy to form its chemical bonds than the old substance will release. More energy will be released from the old substance than the new substance will need to form its chemical bonds. The color will change as a result of the reaction. O The substance will bubble as a result of the reaction. Save and Exit Next Submit Mark this and return
Answer:
More energy is released from the old substance than the new substance needs to form its chemical bonds
Explanation:
Chemical A and Chemical B react in an exothermic reaction. When Chemical A and Chemical B are mixed together more energy will be released from the old substance than the new substance will need to form its chemical bonds. Therefore, option B is correct.
What is an exothermic reaction ?When a chemical reaction goes on, energy is shifted to or from the surroundings. When energy is moved to the surroundings, this is called an exothermic reaction, and the temperature of the surroundings increases.
Examples of exothermic reactions are combustion reactions and many oxidation reactions.
A chemical reaction is exothermic if heat is passed by the system into the surroundings. Because the surroundings are deriving heat from the system, the temperature of the surroundings increases.
Thus, option B is correct.
To learn more about the exothermic reaction, follow the link;
https://brainly.com/question/10373907
#SPJ6
In which direction will the following equilibrium shift when solid sodium fluoride is added to an aqueous solution of acetic acid? CH3COOH â CH3COOâ + H+ A. The equilibrium shifts to the right, to form more products. B. The equilibrium shifts to the left, to form more reactants. C. There is no change; the system is still at equilibrium.
Answer:
A. The equilibrium shifts to the right, to form more products.
Explanation:
When sodium fluoride, NaF, is added to an aqueous solution, some HF is produced:
NaF + H₂O ⇄ OH⁻ + Na⁺ + HF.
That is, some H⁺ reacts decreasing its concentration.
Now, the equilibrium of the acetic acid is:
CH3COOH ⇄ CH3COO⁻ + H⁺
As the concentration of H⁺ decreases:
A. The equilibrium shifts to the right, to form more products.
In order to restore the initial equilibrium.
What is the ground-state electron configuration for the Mn4 ion and is it paramagnetic or diamagnetic?
Answer:
[Ar]3d4 is the ground-state electron configuration for the Mn4 ion
but i don't know whether it is paramagnetic or daimagnetic
Please Help!!
Nitrogen gas can be prepared by passing ammonia over copper(II) oxide, and the other products are copper metal and water vapor. If a sample containing 3.58 moles of NH₃ is reacted with excess copper(II) oxide, how many grams of N₂ will be formed?
Mass of N₂ will be formed : 50.12 g
Further explanationReaction
2 NH₃(g) + 3 CuO(s) → N₂(g) + 3 Cu(s) + 3 H₂O(g)
moles NH₃ = 3.58
ratio mol NH₃ : mol N₂ = 2 : 1
so mol N₂ :
[tex]\tt \dfrac{1}{2}\times 3.58=1.79[/tex]
mass N₂ (MW=28 g/mol) :
[tex]\tt 1.79\times 28=50.12~g[/tex]
if you are correct i will be sure to give your brainliest
Answer:
slow down speed updon't change1 will be the right answerAnswer:
Speeds up
Explanation:
Which of the compounds of H3PO4, Mg(OH)2, LiOH, and HCl, behave as acids when they are dissolved in water?A. Mg(OH)2 and LiOH.B. B H3PO4 and HC.C. Only HCl.D. Only LiOH.
Answer:
B. H3PO
Explanation:
The pH, texture, reactivity, and conductivity should be seen while determining acid or base. Among given option, H₃PO₄ is the acid when dissolved in water.
What are acid and base?Acid is a substance that has sour taste, pH lies in the range of 0-7 and give hydronium ion when dissolved in water. Acid turns blue litmus red. Whereas base has bitter, its pH is between 7-14 and it turns red litmus blue. It give hydroxide ion when dissolved in water.
Extensive properties, such as mass and volume depend on the amount of substance present and are not useful in the identification of a substance. Measuring mass and volume is not useful While determining acid or base. Out of given compounds, H₃PO₄ is the acid when dissolved in water.
Therefore, H₃PO₄ is the acid when dissolved in water.
To learn more about acid and base, here:
https://brainly.com/question/3941445
#SPJ5
how many neutrons make up one of these potassium atoms?
Answer:
20 Neutrons
Explanation:
The element of potassium has the symbol K. The nucleus of an atom of potassium contains 19 protons and 20 neutrons. I hope that answer helps xx
Classify H2O as cation, anion or neither
Answer:
H²O is neither a cation or anion
Explanation:
Hydrogen can form a cation (H+) or an anion (H-‐). Hydrogen in water (H20), ammonia (NH3), methane (CH4) and millions of other compounds is neither a cation nor an anion.
Would you want to build the wire for a cell phone charger out of nitrogen (N)? Why or why not? Be sure to explain how the properties and structure of nitrogen influence your decision.
Answer:
No
Explanation:
Nitrogen cannot be used to build the wire for a cell phone charger.
What are the elements used to build charger ?
Inside phone chargers is aluminum. Aluminum is used in phone chargers because it does a better job of conducting electricity than copper does. Bauxite is used to make aluminum. The crust of the earth contains aluminum.A phone charger is also made of tungsten. The wire's resistance is provided by tungsten. Wolframite make up tungsten. The crust of the Earth contains tungsten.Additionally, phone chargers contain gold. Because it is a conductor, gold is used in phone chargers. However, gold is also resistant to oxidation. Copper ores are used to make gold. Gold can be found everywhere on Earth and in its oceans.Silver is within your mobile charger. Silver conducts electricity. Silver is comprised of various minerals. Silver can be found free in nature at times, but it can also be found in copper, gold, and nickel.Phone chargers contain copper. Copper is also used to carry electric current.Chalcopyrite make up copper. Copper ore deposits can be found all over the world.Copper windings in a transformer are used to convert a 220 V input voltage into a 5 V operating output voltage in mobile phone chargers. The output voltage is greater than the input voltage if the secondary coil has more turns than the primary coil.Nitrogen (N), a nonmetallic element in the periodic table's Group 15 [Va] group. It is the most abundant element in Earth's atmosphere and a component of all living matter. It is a colorless, tasteless, and odorless gas. Nitrogen is used to shield motors, prevent oxidation and other chemical reactions, pressurize cable jackets, and more in the electrical industry.To know more about Nitrogen check this:
brainly.com/question/24235139
#SPJ2
A mixture of Xe, Kr and Ar has a total pressure of 6.70 atm. What is the mole fraction of Kr if the partial pressure of Xe is 1.60 atm and that of Ar is 2.80 atm.
Answer:
0.343
Explanation:
Step 1: Given data
Total pressure of the gaseous mixture (P): 6.70 atmPartial pressure of Xe (pXe): 1.60 atmPartial pressure of Ar (pAr): 2.80 atmStep 2: Calculate the partial pressure of Kr
The total pressure of the mixture is equal to the sum of the partial pressures of the individual gases.
P = pXe + pAr + pKr
pKr = P - pXe - pAr
pKr = 6.70 atm - 1.60 atm - 2.80 atm
pKr = 2.30 atm
Step 3: Calculate the mole fraction of Kr
We will use the following expression.
X(Kr) = pKr/P
X(Kr) = 2.30 atm/6.70 atm
X(Kr) = 0.343
Considering the Dalton's partial pressure, the mole fraction of Kr is 0.34.
The pressure exerted by a particular gas in a mixture is known as its partial pressure.
So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
[tex]P_{T} =P_{1} +P_{2} +...+P_{n}[/tex] where n is the number of gases.
This relationship is due to the assumption that there are no attractive forces between the gases.
Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture.
So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:
[tex]P_{A} =x_{A} P_{T}[/tex]
In this case, you know:
Total pressure= 6.70 atm. Partial pressure of Xe is 1.60 atm. Partial pressure of Ar is 2.80 atm.So, replacing in the Dalton's partial pressure law:
[tex]P_{T} =P_{Xe} +P_{Ar} +P_{Kr}[/tex]
6.70 atm= 1.60 atm + 2.80 atm + [tex]P_{Kr}[/tex]
6.70 atm- 1.60 atm- 2.80 atm= [tex]P_{Kr}[/tex]
2.30 atm=[tex]P_{Kr}[/tex]
Then: [tex]P_{Kr} =x_{Kr} P_{T}[/tex]
2.30 atm= [tex]x_{Kr}[/tex] 6.70 atm
[tex]x_{Kr}[/tex] =2.30 atm ÷6.70 atm
[tex]x_{Kr}[/tex] = 0.34
In summary, the mole fraction of Kr is 0.34.
Learn more:
brainly.com/question/14239096?referrer=searchResults brainly.com/question/25181467?referrer=searchResults brainly.com/question/14119417Why is the following electron configuration not possible?
1-9-1
Answer: because its noy
Explanation:
What color change is exhibited by phenolphthalein during a titration of aqueous acetic acid with aqueous sodium hydroxide ? a. colorless to pink b. pink to colorless c. no color change d. yellow to blue e blue to yellow
The color change exhibited by phenolphthalein during a titration of aqueous acetic acid with aqueous sodium hydroxide is pink to colorless.
An indicator is an organic dye which changes color in acidic, basic and neutral medium.
Phenolphthalein is an example of an indicator. When aqueous acetic acid is titrated against aqueous sodium hydroxide, the indicator may be added to the basic solution.
Phenolphthalein has a pink color in a basic medium. As the acid is added gradually, the solution turns colorless at end point.
Hence, the color change exhibited by phenolphthalein during a titration of aqueous acetic acid with aqueous sodium hydroxide is pink to colorless.
Learn more: https://brainly.com/question/2728613
Which of these results in kinetic energy of an object?
Answer: B
Kinetic Energy is the energy possessed by the body due to "motion".
Answer:
B- motion
Explanation:
Correct on edge 2021
️️