Answer:
A cookie pan that's been heated by an oven will burn your hand because the pan is a solid object and has a much higher thermal conductivity than the air inside the oven. When the pan is heated in the oven, it absorbs the heat and becomes very hot. When you touch the hot pan, the heat energy flows from the pan to your hand, causing burns.
On the other hand, the air inside the oven has a lower thermal conductivity than the pan. This means that the air does not transfer heat as quickly as the pan does. Therefore, although the air inside the oven is hot, it does not burn your hand as easily as the hot pan would.
In other words, the pan is a better conductor of heat than the air inside the oven, which is why it can burn your hand even though they are at the same temperature.
Explanation:
The speed-time graph of a car is shown in the figure, which of the following statement is true: (figure shown in attachment)
• Car has an acceleration of 1.5 ms-2
• Car has constant speed of 7.5 ms-1
• Distance travelled by the car is 75 m
• Average speed of the car is 15 ms-1
In the speed-time graph of a car in the figure, the correct statement is, the distance traveled by car is 75 m. Thus, option C is correct.
Speed is the distance traveled by an object per unit of time. In the graph, speed is taken in the Y axis, and time in the X axis. In the speed-time graph, the acceleration of an object and the distance traveled by an object can be determined. In the speed-time graph, the acceleration is obtained by taking the slope. From the figure, the speed of the car decreases, and it is called deceleration. If the car has a constant speed, the graph has a line parallel to the X-axis.
The distance traveled by car is obtained by determining the area of the figure. The area of the figure is a triangle.
Distance = Area of the triangle = 1/2 (base×height)
= (15×10) /2
= 75m
The distance traveled by car is 75m. The ideal solution is C.
To learn more about the speed-time graph:
https://brainly.com/question/17261628
#SPJ1
Write a differential equation that models the given situation. The stated rate of change is with respect to time t. (Use k for the proportionality constant.) For a car with maximum velocity M, the rate of change of the velocity v of the car is proportional to the difference between M and v. dv/dt=?
dv/dt = k is the differential equation that describes the situation as it is (M - v)
How can you tell if a function is a certain differential equation's solution?The same procedure as before is used to assess whether a function is a solution to a certain differential equation: we evaluate the left and right sides of the d.e. and compare the results to check if they are equal.
What is a differential equation solution?An expression for the dependent variable in terms of one or more independent variables that satisfy the relationship is the differential equation's solution. The generic solution often contains arbitrary constants or arbitrary functions and encompasses all potential solutions.
To know more about differential equation visit:-
https://brainly.com/question/30896158
#SPJ1
the decay constant of radon-222 is 0.181 d-1. if a sample of radon initially contains 6.00 × 108 radon atoms, how many of them are left after 10.0 d?
9.82 × 107
7.67 × 107
8.34 × 108
7.29 × 108
8.56 × 108
The decay constant of radon-222 is 0.181 d-1. if a sample of radon initially contains 6.00 × 10⁸ radon atoms, 9.82 × 10⁷ are left after 10.0 d
The decay of radon-222 follows first-order kinetics, which means that the rate of decay is proportional to the amount of radon present. The mathematical expression for the decay of radon-222 can be written as:
N(t) = N₀e^(-λt)
where N(t) is the number of radon atoms remaining after time t, N₀ is the initial number of radon atoms, λ is the decay constant, and e is the base of the natural logarithm.
To solve the problem, we need to use the above equation and plug in the given values:
N₀ = 6.00 × 10⁸ radon atoms
λ = 0.181 d⁻¹
t = 10.0 d
So, the equation becomes:
N(10.0) = 6.00 × 10⁸ e^(-0.181 × 10.0)
N(10.0) = 6.00 × 10^8 e^-1.81
N(10.0) = 6.00 × 10⁸ × 0.1631
N(10.0) = 9.82 × 10⁷
Therefore, the number of radon atoms remaining after 10.0 days is approximately 9.82 × 10⁷.
To know more about decay constant here:
https://brainly.com/question/16623902#
#SPJ11
The potential energy of a pair of hydrogen atoms separated by a large distance x is given by 6 ( ) C U x x where C is a constant. What is the force that one atom exerts on the other? Is this force attractive or repulsive?
The potential energy of a pair of hydrogen atoms separated by a large distance x is given by 6Cx⁻² where C is a constant. The force that one atom exerts on the other is 6Cx⁻², and this force is always attractive.
The force between two hydrogen atoms can be obtained by taking the negative gradient of the potential energy function with respect to the distance between them (x):
F = -dU/dx
To find the derivative of U(x) with respect to x, we need to use the power rule:
dU/dx = -6Cx⁻²
Substituting this back into the expression for force, we get:
F = -(-6Cx⁻²) = 6Cx⁻²
So the force between the two hydrogen atoms is 6Cx⁻², and this force is always attractive, as the potential energy decreases as the distance between the atoms decreases.
Learn more about potential energy here:
https://brainly.com/question/14427111
#SPJ11
An engineer is developing an electric water heater to provide acontinuous ("on demand") supply of hot water. One trial design isshown in the figure. Water is flowing at the rate F, the inlet thermometer registers
T_1, the voltmeter reads V, and the ammeter reads current I. Then the power (i.e., the heat generated perunit time by the heating element) is VI.
Assume that the heat capacity of water is C and that the heat capacity of the heater apparatus is C_h.
Part A
When a steady state is finally reached, what is the temperature reading T_2 of the outlet thermometer?
Express the outlet temperature interms of T_1, F, C, and any other given quantities.
Imagine that the input temperature ofthe water is T_1=18 degrees C, the ammeter reads I=15.0 A, the voltmeter reads V=120V, and the flow rate is F=0.500 kg/min . The heat capacity of water C=4200 J/(kg*K).
Part C
What is the power P at which the heater operates?
Part A: When a steady state is finally reached, the temperature reading T_2 of the outlet thermometer is T_1 + ∆T.
T_2 = 68.9°C
Part C: The power P at which the heater operates is 1800 W.
Part A:
At steady state, the power input (VI) equals the power used to heat the water. The power used to heat the water can be calculated as the product of mass flow rate (F), specific heat capacity (C), and the change in temperature (∆T).
VI = F * C * ∆T
To find the outlet temperature (T_2), we need to solve for ∆T:
∆T = (VI) / (F * C)
T_2 = T_1 + ∆T
Part B:
Given the specific values for T_1, I, V, and F, we can calculate T_2:
T_1 = 18°C, I = 15.0 A, V = 120 V, F = 0.500 kg/min, and C = 4200 J/(kg*K)
First, convert the flow rate F to kg/s:
F = 0.500 kg/min * (1 min / 60 s) = 0.00833 kg/s
Now, calculate the power input (VI):
VI = 15.0 A * 120 V = 1800 W
Next, find ∆T:
∆T = (1800 W) / (0.00833 kg/s * 4200 J/(kg*K)) = 50.9 K
Finally, find T_2:
T_2 = 18°C + 50.9 K = 68.9°C
Part C:
The power P at which the heater operates is equal to the power input (VI):
P = VI = 1800 W
For more such questions on Outlet temperature.
https://brainly.com/question/13345725#
#SPJ11
A turbine blade rotates with angular velocity w(t) = 5.00 rad/s - 1.20 rad/s^3 t^2. What is the angular acceleration of the blade at t = 7 s? a. 10.1 rad/s^2 b. -20.2 rad/s^2 c. 23.5 rad/s^2 d. -16.8 rad/s^2 e. 13.4 rad/s^2
The angular acceleration of the blade at t = 7 s is -16.8 rad[tex]/s^2[/tex], which is option (d).
The given angular velocity of the blade is:
w(t) = 5.00 rad/s - 1.20 [tex]rad/s^3 t^2[/tex]
To find the angular acceleration of the blade, we need to differentiate the angular velocity with respect to time:
[tex]a(t) = dw(t)/dt = d/dt (5.00 rad/s - 1.20 rad/s^3 t^2)= - 2.40 rad/s^3 t[/tex]
Now, we can substitute t = 7 s into the expression for angular acceleration:
[tex]a(7) = -2.40 rad/s^3 (7)\\= -16.8 rad/s^2[/tex]
Therefore, the angular acceleration of the blade at t = 7 s is -16.8 r[tex]ad/s^2,[/tex]which is option (d).
learn more about velocity here:
https://brainly.com/question/31475519
#SPJ4
A Normalize this wave function. What is the (positive) value of C once this wave function is normalized? You will need the formula se eres? = V -az? Express your answer in terms of w, m, n, and . View Available Hint(s) 190 AED ? CE Submi
Normalizing a wave function and finding the value of the constant C. The wave function you provided is not clear, but I can still guide you through the process.
To normalize a wave function, you need to ensure that the integral of the wave function's magnitude squared over all space is equal to 1. The formula for normalization is:
∫ |Ψ(x)|^2 dx = 1
Here, Ψ(x) represents the wave function, and |Ψ(x)|^2 represents the square of the wave function's magnitude. To find the positive value of C, you would need to:
1. Multiply the wave function by its complex conjugate: C*Ψ(x)*CΨ*(x), where Ψ*(x) is the complex conjugate of Ψ(x).
2. Integrate the result over all space.
3. Set the integral equal to 1 and solve for C.
once you have the wave function, you can follow these steps to find the value of C in terms of the given variables.
To learn more about magnitude click here
brainly.com/question/30395926
#SPJ11
An artificial satellite circling the Earth completes each orbit in 134 minutes. (The radius of the Earth is 6.38 10^6 m. The mass of the Earth is 5.98 10^24 kg.)
a) find the altitude of satellite. b) what is the value of g at the location of this satellite?
The altitude of the satellite is approximately 20,200 km.
The altitude of the satellite can be calculated using the following formula:
T = 2π√(r³/GM)
where T is the period of the orbit, r is the distance from the center of the Earth to the satellite, G is the gravitational constant, and M is the mass of the Earth.
We are given T = 134 minutes = 8040 seconds,
G = 6.6743 ×[tex]10^-^1^1 m^3 kg^-^1 s^-^2[/tex], and M = 5.98 × [tex]10^2^4[/tex]kg. We can solve for r as follows:
r = (GMT²/4π²)(GMT²/4π²[tex]^[/tex][tex])^(^1^/^3^)[/tex]
r = [(6.6743 × [tex]10^-^1^1[/tex]× 5.98 × [tex]10^2^4[/tex]× [tex](8040)^2)[/tex]/(4π²[tex])]^(^1^/^3^)[/tex]
r ≈ 2.66 × 1[tex]10^7[/tex]m
The altitude of the satellite is the distance from the center of the Earth to the satellite minus the radius of the Earth:
altitude = r - 6.38 × [tex]10^6[/tex] m
altitude ≈ 2.02 × [tex]10^7[/tex]m
Therefore, the altitude of the satellite is approximately 20,200 km.
b) The value of g at the location of the satellite can be calculated using the formula:
g =[tex]GM/r^2[/tex]
where G and M are the gravitational constant and mass of the Earth, respectively, and r is the distance from the center of the Earth to the satellite.
Therefore, the altitude of the satellite is approximately 20,200 km and r is the distance from the center of the Earth to the satellite.
To know more about satellite refer here :
https://brainly.com/question/2522613
#SPJ11
which one of the following compounds would exhibit seven signals in its 13c nmr spectrum? group of answer choices v iii iv i ii
To determine which compound would exhibit seven signals in its 13C NMR spectrum, we need to evaluate the number of unique carbon environments in each compound. Unique carbon environments are carbons that are not equivalent due to their connectivity or other factors.
Unfortunately, the specific compounds (i.e., v, iii, iv, i, ii) have not been provided. To help you further, please provide the structures or formulas of the compounds labeled as v, iii, iv, i, and ii.
The compound that would exhibit seven signals in its 13C NMR spectrum is compound IV.
Learn more about environments here:
https://brainly.com/question/29885760
#SPJ11
suppose that you wish to construct a telescope that can resolve features 9.5 km across on the moon, 384,000 km away. you have a 3.8 −m -focal-length objective lens whose diameter is 13.0 cm .
To construct a telescope that can resolve features 9.5 km across on the moon, 384,000 km away. you have a 3.8 m focal-length objective lens whose diameter is 13.0 cm , we would need a magnification of approximately 81.5x.
To calculate the required angular resolution of the telescope, we can use the formula:
θ = 1.22 λ/D
Where θ is the angular resolution, λ is the wavelength of light (we'll assume a value of 550 nm for green light), and D is the diameter of the objective lens.
θ = 1.22 (550 nm) / (13 cm) = 0.000303 radians
Next, we can calculate the angular size of the features on the moon:
θ = size / distance
where size is the size of the feature we want to resolve (9.5 km) and distance is the distance to the moon (384,000 km).
θ = (9.5 km) / (384,000 km)
= 0.0000247 radians
Finally, we can calculate the magnification required to achieve the desired resolution:
Magnification = angular size of the feature / angular resolution of the telescope
Magnification = 0.0000247 radians / 0.000303 radians = 81.5
Therefore, we would need a magnification of approximately 81.5x to resolve features 9.5 km across on the moon using a 3.8 m focal length objective lens with a diameter of 13 cm.
Learn more about focal length here:
https://brainly.com/question/28039799
#SPJ11
To construct a telescope that can resolve features 9.5 km across on the moon, 384,000 km away. you have a 3.8 m focal-length objective lens whose diameter is 13.0 cm , we would need a magnification of approximately 81.5x.
To calculate the required angular resolution of the telescope, we can use the formula:
θ = 1.22 λ/D
Where θ is the angular resolution, λ is the wavelength of light (we'll assume a value of 550 nm for green light), and D is the diameter of the objective lens.
θ = 1.22 (550 nm) / (13 cm) = 0.000303 radians
Next, we can calculate the angular size of the features on the moon:
θ = size / distance
where size is the size of the feature we want to resolve (9.5 km) and distance is the distance to the moon (384,000 km).
θ = (9.5 km) / (384,000 km)
= 0.0000247 radians
Finally, we can calculate the magnification required to achieve the desired resolution:
Magnification = angular size of the feature / angular resolution of the telescope
Magnification = 0.0000247 radians / 0.000303 radians = 81.5
Therefore, we would need a magnification of approximately 81.5x to resolve features 9.5 km across on the moon using a 3.8 m focal length objective lens with a diameter of 13 cm.
Learn more about focal length here:
https://brainly.com/question/28039799
#SPJ11
A 300 g block on a 50.0 cm -long string swings in a circle on a horizontal, frictionless table at 60.0 rpm What is the speed of the block? What is the tension in the string?
The speed of the block is π m/s, and the tension in the string is 2.35 N.
How we can string swings in a circle on a horizontal?we can use the equation for the centripetal force on a object moving in a circle:
F_c = (mv²)/r
where F_c is the centripetal force, m is the mass of the object, v is its velocity, and r is the radius of the circle.
In this case, the only force acting on the block is the tension in the string, so we have:
F_t = F_c = (mv²)/r
where F_t is the tension in the string.
To find the speed of the block, we can use the equation for the circumference of a circle:
C = 2πr
where C is the circumference and r is the radius. We know that the block travels around the circle once every second (since it is moving at 60 rpm), so its velocity is:
v = C/T = 2πr/T
where T is the time for one revolution. Since T = 1 s, we have:
v = 2π(0.5 m) = π m/s
To find the tension in the string, we can substitute our expression for v into our equation for F_t:
F_t = (mv²)/r = (0.3 kg)(π m/s)²/(0.5 m) = 2.35 N
Learn more about block string
brainly.com/question/30623237
#SPJ11
We have a load with an impedance given by Z = 30 + j 70 Ω. The voltage across this load is V = 15002√ ∠ 30∘ V.
A. IS the load inductive or capacitive
B. Determine the power factor
C. Determine the power
D. Determine the reactive power
E. Determine the apparent power delivered to the load
Inductive load is present. The power factor, or cos(30°), is 0.866. The load is given 157.5 W of power. There is 122.1 VAR of reactive power. 182.1 VA is the apparent power that was delivered to the load.
What does 0.8 lag power factor mean?The terminal voltage of a three phase star connected alternator with a certain interference is 6600 V when a rated load with a 0.8 lagging power factor is provided (line-to-line value). The voltage generated in the open circuit with the same interference is 7154 V. (phase value).
Is 0.8 a good power factor?From 0 to 1, where 1 symbolises 100% efficiency, there are power factors. When a device's power factor is 1, it is utilising all of the power being supplied to it.
To know more about power visit:-
https://brainly.com/question/19382734
#SPJ1
calculate the resistance of a 40w automobile headlight designed for 12v
The resistance of the 40W automobile headlight designed for 12V is approximately 3.6 ohms.
Explanation:
To calculate the resistance of a 40W automobile headlight designed for 12V, we will use Ohm's Law and the formula for power.
Step 1: Recall the formula for power: P = IV, where P is power, I is current, and V is voltage.
Step 2: Rearrange the formula to solve for current (I): I = P / V
Step 3: Plug in the given values for power (40W) and voltage (12V): I = 40W / 12V
Step 4: Calculate the current: I = 3.33A
Step 5: Recall Ohm's Law: V = IR, where V is voltage, I is current, and R is resistance.
Step 6: Rearrange the formula to solve for resistance (R): R = V / I
Step 7: Plug in the given values for voltage (12V) and the calculated current (3.33A): R = 12V / 3.33A
Step 8: Calculate the resistance: R = 3.6Ω
The resistance of the 40W automobile headlight designed for 12V is approximately 3.6 ohms.
To know more about resistance visit:
https://brainly.com/question/30799966
#SPJ11
A jewel smith wishing to buff a finished piece of jewelry attaches a buffing disk to his drill. The radius of the disk is 3.40 mm and he operates it at 2.10 104 rad/s. (a) Determine the tangential speed of the rim of the disk. (b) The jeweler increases the operating speed so that the tangential speed of the rim of the disk is now 280 m/s. What is the period of rotation of the disk now?
The tangential speed of the rim of the disk is 71.4 m/s. The period of rotation of the disk is approximately 7.65 x 10⁻⁵ s.
(a) The tangential speed of the rim of the disk can be calculated using the formula:
v = rω
where v is the tangential speed, r is the radius of the disk, and ω is the angular velocity.
Substituting the given values, we get:
v = (3.40 mm)(2.10 x 10⁴ rad/s) = 71.4 m/s
(b) To find the period of rotation of the disk, we can use the formula:
T = 2π/ω
where T is the period of rotation and ω is the angular velocity.
We are given that the new tangential speed of the rim of the disk is 280 m/s.
To find the new angular velocity, we can rearrange the formula for tangential speed:
v = rω
ω = v/r
Substituting the given values, we get:
ω = (280 m/s)/(3.40 mm) = 8.24 x 10⁴ rad/s
Now we can use the formula for period of rotation:
T = 2π/ω = 2π/(8.24 x 10⁴ rad/s) ≈ 7.65 x 10⁻⁵ s
Learn more about velocity:
https://brainly.com/question/80295?source=archive
#SPJ11
The tangential speed of the rim of the disk is 71.4 m/s. The period of rotation of the disk is approximately 7.65 x 10⁻⁵ s.
(a) The tangential speed of the rim of the disk can be calculated using the formula:
v = rω
where v is the tangential speed, r is the radius of the disk, and ω is the angular velocity.
Substituting the given values, we get:
v = (3.40 mm)(2.10 x 10⁴ rad/s) = 71.4 m/s
(b) To find the period of rotation of the disk, we can use the formula:
T = 2π/ω
where T is the period of rotation and ω is the angular velocity.
We are given that the new tangential speed of the rim of the disk is 280 m/s.
To find the new angular velocity, we can rearrange the formula for tangential speed:
v = rω
ω = v/r
Substituting the given values, we get:
ω = (280 m/s)/(3.40 mm) = 8.24 x 10⁴ rad/s
Now we can use the formula for period of rotation:
T = 2π/ω = 2π/(8.24 x 10⁴ rad/s) ≈ 7.65 x 10⁻⁵ s
Learn more about velocity:
https://brainly.com/question/80295?source=archive
#SPJ11
37.•• an object has a weight of 8.0 n in air. however, it apparently weighs only 4.0 n when it is completely submerged in water. what is the density of the object?
The density of an object has a weight of 8.0 N in air and an apparent weight of 4.0 N when submerged in water is 2000 kg/m³.
To determine the density of an object with a weight of 8.0 N in air and an apparent weight of 4.0 N when submerged in water, you'll need to use Archimedes' principle and the formula for density.
First, calculate the buoyant force (which is equal to the loss of weight in water):
Buoyant force = Weight in air - Apparent weight in water
= 8.0 N - 4.0 N
= 4.0 N
Next, calculate the volume of displaced water using the buoyant force and the density of water (1000 kg/m³):
Volume = Buoyant force / (density of water × gravity)
= 4.0 N / (1000 kg/m³ × 9.81 m/s²)
≈ 0.000408 m³
Now, find the mass of the object using its weight and gravity:
Mass = Weight / gravity
= 8.0 N / 9.81 m/s²
≈ 0.815 kg
Finally, determine the density of the object using the mass and the volume:
Density = Mass / Volume
≈ 0.815 kg / 0.000408 m³
≈ 2000 kg/m³
So, the density of the object is approximately 2000 kg/m³.
Learn more about density: https://brainly.com/question/29775886
#SPJ11
a 5.7 g coin sliding to the right at 25.6 cm/s makes an elastic head-on collision with a 17.1 g coin that is initially at rest. after the collision, the 5.7 g coin moves to the left at 12.8 cm/s.a) Find the final velocity of the other coin.
b) Find the amount of kinetic energy transferred to the 17.1 g coin.
The final velocity of the 17.1 g coin is 8.53 cm/s and the amount of kinetic energy= 1428 erg
How we can find the amount of kinetic energy transferred?To solve for the final velocity of the 17.1 g coin, we can use the principle of conservation of momentum, which states that the total momentum of a system before a collision is equal to the total momentum of the system after the collision. In this case, we have:m1v1i + m2v2i = m1v1f + m2v2f
where m1 and v1i are the mass and initial velocity, respectively, of the 5.7 g coin, m2 and v2i are the mass and initial velocity, respectively, of the 17.1 g coin, and v1f and v2f are the final velocities of the two coins.
Substituting the given values, we get:
(5.7 g)(25.6 cm/s) + (17.1 g)(0 cm/s) = (5.7 g)(-12.8 cm/s) + (17.1 g)(v2f)
Solving for v2f, we get:
v2f = [(5.7 g)(25.6 cm/s) + (5.7 g)(-12.8 cm/s)] / (17.1 g)
= 8.53 cm/s
Therefore, the final velocity of the 17.1 g coin is 8.53 cm/s to the right.
To solve for the amount of kinetic energy transferred to the 17.1 g coin, we can use the equation:KE = (1/2)mv²
where KE is the kinetic energy, m is the mass, and v is the velocity.
The initial kinetic energy of the system is:
KEi = (1/2)(5.7 g)(25.6 cm/s)² + (1/2)(17.1 g)(0 cm/s)²
= 1850.88 erg
The final kinetic energy of the system is:
KEf = (1/2)(5.7 g)(-12.8 cm/s)² + (1/2)(17.1 g)(8.53 cm/s)²
= 422.88 erg
KE transferred = KEi - KEf
= 1428 erg
Learn more about kinetic energy.
brainly.com/question/26472013
#SPJ11
A 0.5 m x 0.5 m plate is inclined at a 30º angle. The top surface of the plate is well insulated. The bottom surface is maintained at 60ºC. The ambient air is at 0ºC. What is the film temperature (ºC)? Do not include the unit as it is assumed to be ºC. Calculate the Rayleigh number. Use scientific notation where 1 x 106 would be entered as 1.0 x 10^6. Calculate the Nusselt number. Calculate the convection heat transfer coefficient (W/m2-K). Do not include the units in your answer which are assumed to be W/m2-K. Calculate the rate of heat loss (W) from the plate. Do not include the unit which is assumed to be W.
The film temperature is 30ºC. The Rayleigh number is 4.4 x 10^9. The Nusselt number is 32. The convection heat transfer coefficient is 16.08. The rate of heat loss from the plate is 1283.6.
The film temperature is the average temperature of the plate's top surface, assuming that the convective heat transfer is uniform. In this case, the film temperature is equal to the average of the bottom surface temperature (60ºC) and the ambient temperature (0ºC), which is 30ºC.
The Rayleigh number is a dimensionless number that describes the ratio of buoyancy forces to viscous forces in a fluid.
It is given by Ra = gβΔTL^3/να, where g is the acceleration due to gravity, β is the coefficient of thermal expansion, ΔT is the temperature difference, L is the characteristic length scale (in this case, the thickness of the plate), ν is the kinematic viscosity of air, and α is the thermal diffusivity of air.
Plugging in the given values, the Rayleigh number is 4.4 x 10^9.
The Nusselt number is a dimensionless number that relates the convective heat transfer coefficient to the thermal conductivity of the fluid. It is given by Nu = hL/k, where h is the convective heat transfer coefficient and k is the thermal conductivity of air.
Using the empirical correlation for natural convection over a vertical plate, the Nusselt number can be approximated as Nu = 0.59Ra^(1/4). Plugging in the calculated Rayleigh number, the Nusselt number is 32.
The convection heat transfer coefficient is the proportionality constant between the heat transfer rate and the temperature difference between the plate and the surrounding fluid. It is given by h = kNu/L. Plugging in the given values, the convection heat transfer coefficient is 16.08.
The rate of heat loss from the plate is the product of the convective heat transfer coefficient, the plate's surface area, and the temperature difference between the plate and the surrounding fluid.
It is given by Q = hA(θ-τ), where A is the surface area, θ is the plate temperature, and τ is the surrounding fluid temperature. Plugging in the given values, the rate of heat loss from the plate is 1283.6.
For more questions like Temperature click the link below:
https://brainly.com/question/11464844
#SPJ11
a certain fuse "blows" if the current in it exceeds 1.0 A, at which instant the fuse melts with a current density of 600 A/ cm^2. What is the diameter of the wire in the fuse?
a certain fuse "blows" if the current in it exceeds 1.0 A, at which instant the fuse melts with a current density of 600 A/ cm^2. The diameter of the wire in the fuse is approximately 0.0316 cm or 0.316 mm.
To find the diameter of the wire in the fuse, we can use the formula for current density:[tex]J = I / (pi * r^2)[/tex]
where J is the current density, I is the current, and r is the radius of the wire. We know that the current density when the fuse blows is 600 A/cm^2 and the maximum current is 1.0 A. So we can rearrange the formula and solve for [tex]r: r = sqrt(I / (pi * J))[/tex]
Substituting the values, we get:[tex]r = sqrt(1.0 A / (pi * 600 A/cm^2)) = 0.005 cm[/tex]
Finally, we can convert the radius to diameter by multiplying by 2:
diameter[tex]= 2 * r = 0.010 cm = 0.0316[/tex] cm or 0.316 mm (approx.)
learn more about current here:
https://brainly.com/question/12249228
#SPJ11
what is the value of the product △x△p? ? use p=ℏk to find the uncertainty in the momentum of the particle.Express your answer in terms of quantities given in Part A and fundamental constants._____________
The value of the product △x△p is ℏ × △k × △x.
To find the value of the product △x△p, we will use the Heisenberg Uncertainty Principle, which states that the uncertainty in the position (△x) multiplied by the uncertainty in the momentum (△p) is greater than or equal to half of the reduced Planck constant (ℏ/2).
Given that p = ℏk, we can find the uncertainty in the momentum (△p) by differentiating p with respect to k and then multiplying it by the uncertainty in k (△k):
△p = d(ℏk)/dk * △k
= ℏ * △k
Now, let's use the Heisenberg Uncertainty Principle to find the value of the product △x△p:
△x△p ≥ ℏ/2
Since △p = ℏ * △k, we can substitute this expression into the inequality:
△x(ℏ * △k) ≥ ℏ/2
Now, we can express △x△p in terms of quantities given in Part A and fundamental constants:
△x△p = ℏ * △k * △x
This expression shows the value of the product △x△p in terms of the reduced Planck constant (ℏ) and the uncertainties in position (△x) and wave number (△k).
Learn more about product:
https://brainly.com/question/10873737
#SPJ11
an electrophoresis gel rests between two parallel plates; the potential difference between the plates is 58 vv. each second, 44 mcmc of charge moves through the gel. What is the increase in thermal energy of the gel in 1.0 minute?
The increase in thermal energy of the gel in 1.0 minute is 153 J.
To solve this problem, we can use the formula for the electrical power dissipated by a resistor:
P = IV
Where P is the power, I is the current, and V is the potential difference. In this case, the gel can be treated as a resistor, and the current is given by the amount of charge that moves through it per second:
I = Q/t
where Q is the charge and t is the time. We can rearrange this equation to solve for Q:
Q = It
We are given the potential difference and the amount of charge that moves through the gel, so we can solve for the current:
I = Q/t = (44 mC)/(1 s) = 44 mA
Now we can calculate the power dissipated by the gel:
P = IV = (44 mA)(58 V) = 2.55 W
The energy absorbed by the gel in one second is equal to the power multiplied by the time:
E = Pt = (2.55 W)
(1 s) = 2.55 J
To find the increase in thermal energy of the gel in one minute, we need to multiply by the number of seconds in one minute:
E_total = E × t = (2.55 J/s) × (60 s) = 153 J
To know more about thermal energy, click here.
https://brainly.com/question/18989562
#SPJ4
Using what you know about the compressibility of different states of matter explain why
a) air is used to inflate tyres
b) steel is used to make railway lines
Answer:
Explanation:
a) Air is highly compressible. As it has pressure it can also handle atm (Atmosphere) pressure. It makes the drving smooth and gives the required friction for driving. Also it is very easily available.
b) Steel is free from rust and it has high tensile strength. It has the resistence to internal and external cracks.
what did you notice about the declination of polaris in all of the different locations?
The declination of Polaris, also known as the North Star, varies depending on the observer's location on Earth.
What's declination of PolarisDeclination refers to the angular distance of a celestial object from the celestial equator.
In the case of Polaris, its declination is closely linked to the observer's latitude. At the Earth's equator (0° latitude), Polaris appears on the horizon, and its declination is 0°. As you move towards the North Pole (90° latitude), Polaris appears higher in the sky, directly above the observer.
At this point, its declination is 90°. This relationship is consistent, with Polaris' declination increasing by 1° for every 1° of latitude gained as you move north. In the Southern Hemisphere, Polaris is not visible, as it lies below the horizon.
Observers in different locations will see varying declinations for Polaris due to their varying latitudes. This correlation between an observer's latitude and Polaris' declination allows for the star to be utilized as a navigational tool for determining one's position on Earth.
In summary, the declination of Polaris varies depending on the observer's location, increasing as one moves northward and reaching its maximum declination at the North Pole.
Learn more about declination at
https://brainly.com/question/21194444
#SPJ11
Are voters informed or misled by entities such as individuals, social media, interest groups, political parties, etc…?
Entities including people, social media, interest groups, political parties, and other information sources can both inform and mislead voters. Depending on the veracity, legitimacy, and purpose of the material being broadcast, these institutions' influence on voter information might vary significantly.
On the one hand, these organizations can offer voters useful information that will enable them to make knowledgeable choices about candidates, policies, and issues. For instance, people can contribute their opinions and experiences and political parties and interest groups can provide information about their platforms and policy stances. Voters can access a variety of information and perspectives via social media, which can also be used as a forum for political conversation. However, these organizations may also deceive voters by spreading false information.
To know more about political parties
https://brainly.com/question/30329165
#SPJ1
40.0 pj of energy is stored in a 3.00 cm × 3.00 cm × 3.00 cm region of uniform electric field. what is the electric field strength?
40.0 pj of energy is stored in a 3.00 cm × 3.00 cm × 3.00 cm region of the uniform electric field. The electric field strength is 3298 N/C.
The energy density u of an electric field is given by:
u = (1/2)εE²
where ε is the permittivity of free space and E is the electric field strength.
The energy stored in a region of the electric field is given by:
U = uV
where V is the volume of the region.
In this problem, we are given the energy U and the dimensions of the region, so we can calculate the volume V:
V = (3.00 cm)³ = 27.0 cm³ = 27.0 × 10⁻⁶m³
We are also given that the energy density is uniform, so the electric field strength E is the same throughout the region. Therefore, we can rearrange the equation for energy density to solve for E:
E = √(2U/εV)
Substituting the values given in the problem, we get:
E = √(2(40.0 × 10^-12 J)/(8.85 × 10^-12 C^2/N·m^2)(27.0 × 10^-6 m^3))
E = √(1.086 × 10^7 N/C^2) = 3298 N/C
Therefore, the electric field strength is approximately 3298 N/C.
Learn more about electric field here:
https://brainly.com/question/19878202
#SPJ11
40.0 pj of energy is stored in a 3.00 cm × 3.00 cm × 3.00 cm region of the uniform electric field. The electric field strength is 3298 N/C.
The energy density u of an electric field is given by:
u = (1/2)εE²
where ε is the permittivity of free space and E is the electric field strength.
The energy stored in a region of the electric field is given by:
U = uV
where V is the volume of the region.
In this problem, we are given the energy U and the dimensions of the region, so we can calculate the volume V:
V = (3.00 cm)³ = 27.0 cm³ = 27.0 × 10⁻⁶m³
We are also given that the energy density is uniform, so the electric field strength E is the same throughout the region. Therefore, we can rearrange the equation for energy density to solve for E:
E = √(2U/εV)
Substituting the values given in the problem, we get:
E = √(2(40.0 × 10^-12 J)/(8.85 × 10^-12 C^2/N·m^2)(27.0 × 10^-6 m^3))
E = √(1.086 × 10^7 N/C^2) = 3298 N/C
Therefore, the electric field strength is approximately 3298 N/C.
Learn more about electric field here:
https://brainly.com/question/19878202
#SPJ11
with a tire gauge, you measure the pressure in a car tire as 2.1×105n/m22.1×105n/m2 .
With a tire gauge, you can measure the pressure in a car tire, which is expressed in units of N/m2 or pascals (Pa). In this case, the pressure in the car tire is 2.1×105 N/m2, which means that the tire is inflated to a relatively high pressure.
Pascal's law states that pressure applied to a fluid inside of a container will be communicated to every point within the fluid as well as the container's walls without a change in magnitude. The fluid has equal pressure in all directions at every place.
Pressure is created by multiplying the force by the surface area on which it acts. According to Pascal's principle, increasing the pressure on one piston in a hydraulic system will result in an equivalent rise in pressure on the other piston.
It is important to check the tire pressure regularly with a tire gauge to ensure that the tires are properly inflated, which can help improve fuel efficiency, handling, and safety on the road.
Learn more about Pascal's law here
https://brainly.com/question/29875098
#SPJ11
Students attach a thin strip of metal to a table so that the strip is horizontal in relation to the ground. A section of the strip hangs off the edge of the table. A mass is secured to the end of the hanging section of the strip and is then displaced so that the mass-strip system oscillates, as shown in the figure. Students make various measurements of the net force F exerted on the mass as a result of the force due to gravity and the normal force from the strip, the vertical position y of the mass above and below its equilibrium position y, and the period of oscillation T when the mass is displaced by different amplitudes A. Which of the following explanations is correct about the evidence required to conclude that the mass undergoes simple harmonic motion? The period T of oscillation depends on the amplitude A of the mass, because the students can directly change this value during the experiment. The net force F exerted on the mass must be directly proportional to the vertical position y, because the net force exerted on the mass is the restoring force. The mass's acceleration is proportional to the square of the vertical position y, because the elastic potential energy of the mass-strip system can be modeled by the equation for spring potential energy. The motion of the mass repeats after a specific time interval, because total mechanical energy is considered to be conserved in simple harmonic motion.
The mass's acceleration is proportional to the square of the vertical position y, but this is not necessary to determine in order to conclude that the motion is simple harmonic motion.
What is acceleration?Acceleration is the rate of change of an object's velocity. It is a vector quantity, meaning it has both magnitude and direction. Acceleration can be determined by dividing the change in velocity by the amount of time it takes for the change to occur.
The correct explanation about the evidence required to conclude that the mass undergoes simple harmonic motion is that the motion of the mass repeats after a specific time interval, because total mechanical energy is considered to be conserved in simple harmonic motion. The period T of oscillation does depend on the amplitude A of the mass, but this does not directly provide evidence for simple harmonic motion. The net force F exerted on the mass must be directly proportional to the vertical position y in order for the motion to be simple harmonic motion, but it is not necessary to determine this directly during the experiment.
To learn more about acceleration
https://brainly.com/question/460763
#SPJ1
how frequently would you expect a 8-bp sequence
The frequency of an 8-bp sequence would depend on the particular DNA sequence being considered.
Assuming that the DNA sequence is random and evenly distributed, we can use the formula for the probability of finding a specific sequence of n nucleotides in a DNA sequence of length N:
[tex]P = (1/4)^n[/tex]
where 1/4 is the probability of finding any particular nucleotide (A, C, G, or T) and n is the length of the sequence.
For an 8-bp sequence, n = 8, so the probability of finding a specific 8-bp sequence in a DNA sequence of any length is:
P = [tex](1/4)^8 = 1/65,536 ≈ 1.5 × 10^-5[/tex]
This means that we would expect to find a specific 8-bp sequence once every 65,536 base pairs on average in a random DNA sequence. However, it's important to note that actual frequencies can vary depending on the DNA sequence being considered, since some sequences may be more common or rare than others due to factors like selective pressure, mutation rates, and DNA replication dynamics.
To learn more about Gamma rays here
https://brainly.com/question/22166705
#SPJ4
A 0.5 N force is required to stretch a spring by 0.5 cm.
a) What is the spring constant?
b) How much energy is stored in the spring?
a) The spring constant can be found using the formula F = kx, where F is the force applied, x is the displacement, and k is the spring constant. Plugging in the values given in the question, we get:
0.5 N = k(0.5 cm)
Solving for k, we get:
k = 1 N/cm
So the spring constant is 1 N/cm.
b) The energy stored in a spring can be calculated using the formula E = (1/2)kx^2, where E is the energy stored, k is the spring constant, and x is the displacement. Plugging in the values given in the question, we get:
E = (1/2)(1 N/cm)(0.5 cm)^2
Simplifying, we get:
E = 0.125 J
So the energy stored in the spring is 0.125 J.
To know more about spring constant here
https://brainly.com/question/14159361
#SPJ11
High-Mass Stellar Evolution Complete this "story" about the evolution of high-mass stars as they leave the main sequence. High-mass stars do not experience a helium flash. Instead, they stably burn heavier and heavier elements as they evolve. Because of their larger_______ , they have stronger_______ This causes their cores to have_______ temperatures and_______ pressures compared to low-mass stars. Therefore their evolution happens_______ than low-mass star evolution. While it evolves from the main sequence, the high-mass star's temperature _______ while its radius_______ so that its luminosity _______ it has a mostly_______ motion on the H⋅R diagram. As each new element is burned to completion in the core, the track loops toward higher and lower temperatures on the H-R diagram, until it eventually builds up a layered core with _______ at the center.
High-mass stars do not experience a helium flash. Instead, they stably burn heavier and heavier elements as they evolve. Because of their larger mass, they have stronger gravitational forces.
This causes their cores to have higher temperatures and pressures compared to low-mass stars. Therefore their evolution happens much faster than low-mass star evolution.
While it evolves from the main sequence, the high-mass star's temperature increases while its radius decreases so that its luminosity increases. It has a mostly horizontal motion on the H⋅R diagram.
As each new element is burned to completion in the core, the track loops toward higher and lower temperatures on the H-R diagram, until it eventually builds up a layered core with iron at the center.
learn more about gravitational forces. here:
https://brainly.com/question/517289
#SPJ4
a ball is thrown at an angle of 45° to the ground. if the ball lands 81 m away, what was the initial speed of the ball? (round your answer to the nearest whole number. use g ≈ 9.8 m/s2.) v0 = m/s
The initial speed of the ball was approximately 39 m/s
We can use the kinematic equations of motion to solve for the initial speed of the ball. Since the ball is thrown at an angle of 45° to the ground, we know that its initial vertical velocity is equal to its initial horizontal velocity. We can use this fact to break down the initial velocity vector into its horizontal and vertical components.
Let's use the following variables:
v0: initial speed of the ball
θ: angle of the ball's initial velocity (45° in this case)
d: distance the ball travels (81 m in this case)
g: acceleration due to gravity (9.8 m/s^2)
Using the kinematic equation for the horizontal distance traveled by an object, we have:
[tex]d = v0*cos(θ)*t[/tex]
where t is the time it takes for the ball to travel the distance d. Since the ball is thrown at 45°, we have:
[tex]cos(45°) = √2/2[/tex]
Substituting this into the equation above, we get:
d = v0*(√2/2)*t
Using the kinematic equation for the vertical displacement of an object, we have:
[tex]y = v0*sin(θ)*t - (1/2)gt^2[/tex]
where y is the maximum height reached by the ball. Since the ball is thrown at 45°, we have:
sin(45°) = √2/2
Substituting this into the equation above, we get:
y = (v0*√2/2)[tex]*t - (1/2)gt^2[/tex]
Since the ball is thrown at an angle of 45°, the time it takes for the ball to reach its maximum height is equal to half the total time of flight. Therefore, we can express t in terms of d and v0 as:
t = d / (v0*cos(θ))
Substituting this expression for t into the equation for y, we get:
y = (v0√2/2)(d / (v0cos(θ))) - (1/2)g(d / (v0cos(θ)))[tex]^2[/tex]
Simplifying, we get:
y = (dsin(θ)√2)/(2cos[tex]^2(θ)) - (gd^2)/(2v0^2cos^2[/tex](θ))
Since we want to find v0, we can rearrange this equation to isolate v0:
v0 = √((gd[tex]^2)/(2ycos^2(θ)) - (d^2)/(4cos^4([/tex]θ)))
Plugging in the given values, we get:
v0 = √((9.8 m/[tex]s^2)(81 m)^2 / (2(0 m)(cos^2(45°))) - (81 m)^2 / (4(cos^4([/tex]45°))))
v0 ≈ 39 m/s
Therefore, the initial speed of the ball was approximately 39 m/s.
To know more about speed here
https://brainly.com/question/13943409
#SPJ4