The outlet volume flux of the oil is approximately 817.3 mL/s, and the average outlet velocity of the oil is approximately 130.4 cm/s.
Specific gravity of oil (SG) = 0.89
Inlet weight flow of oil (W) = 250 N/h
Clearance between thrust plates (h) = 2 mm = 0.002 m
Inlet diameter of the bearing (Di) = 3 mm = 0.003 m
Outlet diameter of the bearing (D) = 10 cm = 0.1 m
(a) Outlet volume flux in mL/s:
The volume flux (Q) is given by the formula:
Q = W / (SG × g)
where g is the acceleration due to gravity, which is approximately 9.8 m/s².
Converting weight flow from N/h to N/s:
W = 250 N/h = 250 / 3600 N/s (since 1 hour = 3600 seconds)
Substituting the given values into the formula:
Q = (250 / 3600) N/s / (0.89 × 9.8 m/s²)
Converting m³/s to mL/s:
1 m³ = 1000000 mL
Q = [(250 / 3600) / (0.89 × 9.8)] × 1000000 mL/s
Q ≈ 817.3 mL/s
(b) Average outlet velocity in cm/s:
The average outlet velocity (Vavg) can be calculated using the formula:
Vavg = Q / (Aout)
where Aout is the outlet area of the bearing, which can be calculated using the formula for the area of a circle:
Aout = π × (D/2)²
Substituting the given values into the formula:
Vavg = 817.3 mL/s / (π × (0.1/2)²) m²
Converting m² to cm²:
1 m² = 10000 cm²
Vavg = 817.3 mL/s / (π × (0.1/2)² × 10000) cm²
Vavg ≈ 130.4 cm/s
You can learn more about Specific gravity at: brainly.com/question/8808140
#SPJ11
When calcium oxalate, CaC204, dissolves in water, what ions are produced? a. Ca2+2C^3+ + 4 02- b. no ions are formed c. Ca^2+ + C2^2- + 2O2d. Ca^2+ + C204^2-e. 2 Ca^+ + C2O4^2-
When calcium oxalate is dissolved in water, the ions produced are: Ca²⁺ and C₂O₄²⁻.
So, the correct answer is:
d. Ca²⁺ + C₂O₄²⁻
Calcium oxalate is a salt (calcium salt) of oxalic acid. Certain foods are known to have high concentration of calcium oxalate and they are known to cause numbness and sores when ingested. The concentration of this calcium salt in fruits and vegetable can be reduced by boiling them. When CaC₂O₄ is dissolved in water, it dissociates to form two ions, namely, Ca²⁺ and C₂O₄²⁻.
Therefore, the correct answer is d: Ca²⁺ and C₂O₄²⁻.
To learn more about calcium oxalate visit: https://brainly.com/question/31385538
#SPJ11
determine whether a soda can would be chiral or achiral.
To determine whether a soda can is chiral or achiral, we need to consider the following terms:
Chiral: An object is chiral if it cannot be superimposed on its mirror image. In other words, it has no plane of symmetry.
Achiral: An object is achiral if it can be superimposed on its mirror image, meaning it has a plane of symmetry.
A soda can is typically cylindrical with a top that is circular and symmetrical. If you were to create a mirror image of a soda can, you could superimpose the original can onto its mirror image. Therefore, a soda can would be achiral, as it has a plane of symmetry.
To know more about chiral and achiral:
https://brainly.com/question/30089747
#SPJ11
a 393 ml air sample collected at 45°c has a pressure of 688 torr what pressure will the air extert if it is allowed to expand to 491ml at 62°c
Answer in units of torr
Answer:
This is the combined gas law formula:
(P1V1)/(T1) = (P2V2)/(T2)
where P1 = 688 torr, V1 = 393 ml, T1 = 45°C + 273.15 = 318.15 K, P2 = unknown, V2 = 491 ml, and T2 = 62°C + 273.15 = 335.15 K.
Solving for P2:
P2 = (P1V1T2)/(V2T1)
= (688 torr * 393 ml * 335.15 K) / (491 ml * 318.15 K)
= 821.38 torr
Therefore, the air will exert a pressure of 821.38 torrs when expanded to 491 ml at 62°C.
What would be the composition of this copolymer at the end of the reaction? a. This cannot be worked out simply, because the composition of the feed changes with conversion. b. Fi = 0.67 c. F, -0.50 d. F, -0.75 e. F, - 1 (almost pure monomer 2)
The composition of this copolymer at the end of the reaction would be F, -1 (almost pure monomer 2) (Option E).
Copolymers are formed from the combination of two or more monomers in varying proportions, and the composition of the copolymer depends on the ratio of the monomers in the feed. As the reaction proceeds, the concentration of each monomer in the feed changes, leading to a change in the composition of the copolymer. Therefore, it is difficult to predict the exact composition of the copolymer at the end of the reaction. However, if one of the monomers is present in a much higher concentration (i.e., close to pure) compared to the other, then the copolymer would be expected to have a composition close to that of the pure monomer. Hence, option (E) would be the most appropriate answer in this case.
Learn more about copolymer; https://brainly.com/question/15736390
#SPJ11
A chemist is studying the following equilibirum, which has the given equilibrium constant at a certain temperature: 2 CH (g) 3 H2(g)+ C,H2(g) Kp-1.x 10 He fills a reaction vessel at this temperature with 10. atm of methane gas. Use this data to answer the questions in the table below. Can you predict the equilibrium pressure of H,, using only the tools yes available to you within ALEKS? no X ? If you said yes, then enter the equilibrium pressure of H, at right. atm Round your answer to 1 significant digit.
No, The equilibrium pressure of H2 would be 3x, rounded to 1 significant digit.
the equilibrium pressure of H2 cannot be predicted using only the given data. Additional information about the initial concentrations of the reactants and/or the reaction conditions (such as volume or temperature changes) would be needed to calculate the equilibrium pressure of H2.
It seems like the chemical equation you provided has some typos. Based on the given information, I believe you meant the following equilibrium reaction:
CH4(g) ⇌ 3 H2(g) + C2H2(g)
You mentioned that the chemist fills a reaction vessel with 10 atm of methane gas (CH4) at a certain temperature and has an equilibrium constant Kp = 1.0 x 10^4.
To predict the equilibrium pressure of H2, we can set up an ICE (Initial, Change, Equilibrium) table to analyze the changes in pressure for each substance involved in the equilibrium reaction:
CH4 3 H2 C2H2
Initial: 10.0 0 0
Change: -x +3x +x
Equilibrium: 10.0-x 3x x
Kp = (P_H2^3 * P_C2H2) / P_CH4^1
1.0 x 10^4 = ((3x)^3 * x) / (10.0 - x)
Unfortunately, this equation requires solving for x, which might not be possible using only ALEKS tools. However, you could potentially solve it using other mathematical tools or software.
If you were able to solve for x, the equilibrium pressure of H2 would be 3x, rounded to 1 significant digit.
To know more about equilibrium pressure click here:
brainly.com/question/17049019
#SPJ11
A mass of 0.4113 g of an unknown acid, HA, is titrated with sodium hydroxide, NaOH. If the acid reacts with 28.10 mL of 0.1055 M aqueous sodium hydroxide, what is the molar mass of the acid? Select one: a 138.7 g/mol o b. 820.7 g/mol c.2.965 * 10 g/mol d. 9.128 g/mol e. 337 3 g/mol
When sodium hydroxide, NaOH, is used to titrate a quantity of 0.4113 g of an unknown acid HA, the acid's molar mass is 138.7 g/mol if it reacts with 28.10 mL of 0.1055 M aqueous sodium hydroxide. That is option a.
To find the molar mass of the acid HA, we need to first calculate the number of moles of NaOH that reacted with the acid.
Number of moles of NaOH = concentration of NaOH x volume of NaOH used
= 0.1055 M x 0.02810 L
= 0.002967 mol
Since the acid and the base react in a 1:1 ratio, the number of moles of the acid HA is also 0.002967 mol.
Now we can use the mass and number of moles to calculate the molar mass of the acid.
The molar mass of HA = mass of HA/number of moles of HA
= 0.4113 g/0.002967 mol
= 138.7 g/mol
Therefore, the molar mass of the acid is 138.7 g/mol, which is option a.
Learn more about molar mass: https://brainly.com/question/837939
#SPJ11
the compound sodium nitrite is a strong electrolyte. write the reaction when solid sodium nitrite is put into waterinclude states of matter in your answer
When solid sodium nitrite is put into water, it dissolves and dissociates into its ions. The balanced chemical equation for the reaction is:
[tex]NaNO_{2} (s) + H_{2} O (l) = Na+ (aq) + NO_{2}^{-} (aq) + H_{2} O (l)[/tex]
In this equation, [tex] NaNO_{2}[/tex] is the solid compound in its solid state, and [tex] H_{2} O [/tex] is the water in its liquid state. [tex]Na^{+}[/tex] and [tex] NO_{2}^{-}[/tex] are the ions that are formed when sodium nitrite dissolves in water, and they are in the aqueous state as they are dissolved in water. Since sodium nitrite fully dissociates in water, it is considered a strong electrolyte.
To know more about an electrolyte:
https://brainly.com/question/29771118
#SPJ11
But wait. Besides the four molecule groups laid out, which are just carbons and hydrogens, there's a key functional group missing. Which one? a) Aldehyde b) Aromatic c) Alcohol d) Ester
The functional group missing is alcohol. So, the answer is C.
Understanding molecule groupsWhen discussing molecules, it is important to consider their functional groups, which determine their properties and behaviors.
The four molecule groups that were mentioned in the question refer to carbons and hydrogens, which are known as alkanes, alkenes, alkynes, and cycloalkanes. However, there is a key functional group missing from this list.
The answer is (c) alcohol, which consists of an -OH group bonded to a carbon atom. Alcohols are important in many biological and industrial processes, and they can have varying degrees of solubility and reactivity depending on their structure.
Understanding the functional groups present in a molecule is crucial for predicting its behavior and interactions with other compounds, making it an essential concept in chemistry.
Learn more about molecule group at
https://brainly.com/question/18915679
#SPJ11
Aldol condensation is a reaction between ketones and/or aldehydes In addition to the organic product, HCI is also formed In the Aldol Condensation procedure used in lab, the stoichiometric ratio between the aldehyde and ketone is
The stoichiometric ratio between the aldehyde and ketone is typically 1:1.
Aldol condensation is a reaction between ketones and/or aldehydes, which involves the formation of a β-hydroxy carbonyl compound (aldol) and water.
In addition to the organic product, HCl is not formed in a typical Aldol condensation; however, a base or acid catalyst may be used to facilitate the reaction.
In the Aldol condensation procedure used in lab, the stoichiometric ratio between the aldehyde and ketone is typically 1:1, as each molecule reacts with the other to form the desired product.
Know more about Aldol condensation - brainly.com/question/27178362
#SPJ11
Predict how each of the following exhibit changes would change the temperature of the exhibit water. Leaves grow on the elm tree in the spotted neck otter exhibits reducing the intensity of light striking the pond's surface by 65%
Reducing the intensity of light striking the pond's surface by 65% due to leaves growing on the elm tree in the spotted neck otter exhibit is likely to decrease the temperature of the exhibit water.
What other factors can affect the temperature of exhibit water in a zoo?Other factors that can affect the temperature of exhibit water in a zoo include the ambient temperature, the water flow rate, and the presence of shade or cover over the exhibit.
How can changes in exhibit water temperature affect animal behavior and health?Changes in exhibit water temperature can affect animal behavior and health by impacting their thermoregulation, metabolism, immune system, and stress levels. Extreme temperatures can also lead to heat or cold stress, dehydration, and other health problems.
Learn more about temperature here:
https://brainly.com/question/31055263
#SPJ1
Naphthalene (NP), acetanilide (AC), benzoin (BZ), or biphenyl (BP)
Which of the four compounds above would you expect to dissolve in toluene? Explain your answer.
Which of the above four compounds would be least likely to be soluble in water? Explain your answer.
If you look at an organic molecule, what functional groups would suggest that a compound will be water soluble? Not water soluble?
The compounds which are soluble in toluene are Benzoin (BZ) and biphenyl (BP) and those which are least likely to be soluble in water are Biphenyls (BP). Functional groups such as hydroxyl (-OH), carboxyl (-COOH), and functional groups such as alkyl (-CH3) suggest that a compound will be water soluble and nonsoluble respectively.
Benzoin (BZ) and biphenyl (BP) dissolve in toluene as they are both nonpolar compounds and toluene is a nonpolar solvent. Naphthalene (NP) and acetanilide (AC) are both polar compounds and are less likely to dissolve in toluene.
Biphenyl (BP) would be the least likely to be soluble in water as it is nonpolar and water is a polar solvent. Naphthalene (NP), acetanilide (AC), and benzoin (BZ) all have some polarity and may have some solubility in water.
Functional groups such as hydroxyl (-OH) and carboxyl (-COOH) tend to make compounds more water-soluble as they are polar and can form hydrogen bonds with water molecules. Nonpolar functional groups such as alkyl (-CH3) tend to make compounds less water-soluble as they do not interact well with polar water molecules.
Learn more about the solubility of polar and nonpolar compounds: https://brainly.com/question/2468936
#SPJ11
how many grams of nickel(ii) sulfate, niso4 (molar mass = 154.8g/mol) must be dissolved in 288.0 g of water to raise the boiling point by 0.350 oc? (kbp = 0.51 oc/m)
The 10.8 grams of nickel (II) sulfate must be dissolved in 288.0 g of water to raise the boiling point by 0.350 oC.
Why are nickel (ii) sulfate, niso4(molar mass) be dissolved in 288.0 g of water?To solve this problem, we can use the following equation:
ΔTb = Kb x molality
where ΔTb is the boiling point elevation, Kb is the molal boiling point elevation constant for the solvent (water), and molality is the molal concentration of the solute (nickel(II) sulfate).
First, we need to calculate the molality of the solution:
molality = moles of solute / mass of solvent (in kg)
We can calculate the moles of solute using the following equation:
moles of solute = mass of solute / molar mass
Let's start by calculating the moles of nickel(II) sulfate:
moles of NiSO4 = mass of NiSO4 / molar mass of NiSO4
moles of NiSO4 = (molality x mass of solvent) / molar mass of NiSO4
Since we want to know how many grams of nickel(II) sulfate are needed, we can rearrange this equation to solve for mass of NiSO4:
mass of NiSO4 = (moles of NiSO4 x molar mass of NiSO4) / molality
mass of NiSO4 = (ΔTb / Kb) x (mass of solvent / molar mass of NiSO4)
Now we can plug in the values given in the problem:
ΔTb = 0.350 oC
Kb = 0.51 oC/m
mass of solvent = 288.0 g
molar mass of NiSO4 = 154.8 g/mol
mass of NiSO4 = (ΔTb / Kb) x (mass of solvent / molar mass of NiSO4)
mass of NiSO4 = (0.350 oC / 0.51 oC/m) x (288.0 g / 154.8 g/mol)
mass of NiSO4 = 10.8 g
Learn more about nickel.
brainly.com/question/15616649
#SPJ11
A cotton fiber, when dry, has a tenacity of 5 g/den. After wet conditioning, it absorbs a maximum amount of moisture. Select the maximum resulting tenacity, in g/den, that this fiber would achieve. Select one: a. 3.55 g/den b. 5.00 g/den c. 6.20 g/den d. 6.45 g/den
The maximum resulting tenacity of a cotton fiber after wet conditioning can be calculated using the following formula:
Maximum resulting tenacity = Dry tenacity / (1 + moisture regain)
Moisture regain is the amount of moisture absorbed by the fiber when it is fully saturated. For cotton, the moisture regain is around 8.5%.
Therefore, using the given dry tenacity of 5 g/den and a moisture regain of 8.5%, we can calculate the maximum resulting tenacity as:
Maximum resulting tenacity = 5 / (1 + 0.085) = 4.58 g/den
Therefore, the closest option to this answer is (a) 3.55 g/den.
After wet conditioning, a cotton fiber's tenacity usually increases. Given that the dry tenacity is 5 g/den, the maximum resulting tenacity, in g/den, that this fiber would achieve is: c. 6.20 g/den.
Visit here to learn more about tenacity brainly.com/question/30672991
#SPJ11
Cheetahs can run at speeds of up to 60 mi per hour. How many seconds does it take a cheetah to run 10 m at this speed? (1 mi 1.609 km) a. 0.37 s b. 56 s c. 0.10 s d. 0.43 s e. 18 s
Therefore, it takes a cheetah approximately 0.37 seconds to run 10 meters at a speed of 60 miles per hour. The correct answer is a. 0.37 s.
How to find the speed in miles per hour?To find out how many seconds it takes a cheetah to run 10 meters at a speed of 60 miles per hour, we'll need to do the following steps:
1. Convert the speed from miles per hour to meters per second.
2. Use the formula time = distance / speed to find the time it takes to run 10 meters.
Step 1: Convert the speed from miles per hour to meters per second:
60 miles per hour * 1.609 km/mi * 1000 m/km * (1/3600) hour/second = 26.8224 meters per second
Step 2: Use the formula time = distance / speed to find the time it takes to run 10 meters:
time = 10 meters / 26.8224 meters per second = 0.373 seconds
To know more about Speed:
https://brainly.com/question/19819936
#SPJ11
what is the value listed for aluminum, the first element in the table?
The value listed for aluminum, the first element in the table, depends on what table you are looking at. If you are referring to the periodic table, the value listed for aluminum is 13, which refers to its atomic number.
Aluminum is not the first element in the periodic table, Aluminum is the 13th element, and it is represented by the symbol "Al." It is a lightweight, silver-white metal that is highly valued for its versatility, strength, and resistance to corrosion. Aluminum is abundant in the Earth's crust and is primarily found in bauxite ore. Its value lies in its multiple applications, such as in the automotive, aerospace, and construction industries, where it is used to produce lightweight and durable structures. Additionally, aluminum is an excellent conductor of electricity, making it a popular choice for electrical wiring and components. The metal is also extensively used in food and beverage packaging due to its ability to form a protective layer against oxidation, preserving the contents inside. Moreover, aluminum is highly recyclable, which contributes to its value in sustainable practices and reduces the environmental impact of its production. In summary, while aluminum is not the first element in the periodic table, its value lies in its many beneficial properties, making it a widely used and valuable material across various industries.
Learn more about oxidation here: https://brainly.com/question/13521992
#SPJ11
The rate constant for this zero-order reaction is 0.0170 M·s–1 at 300 °C.
A -> Products
How long (in seconds) would it take for the concentration of A to decrease from 0.850 M to 0.220 M?
The rate constant for this zero-order reaction is 0.0170 M sat 300 c → products How long (in seconds) would it take for the concentration of A to decrease from 0.850 M to 0.220 M? Number
If the rate constant for the zero-order reaction is 0.0170 M sat 300 c → products, it would take approximately 37.06 seconds for the concentration of A to decrease from 0.850 M to 0.220 M at 300 °C.
To find the time it takes for the concentration of A to decrease from 0.850 M to 0.220 M in a zero-order reaction, we will use the equation:
Rate = k × [A]^0
Since it is a zero-order reaction, the rate is constant and equal to k, the rate constant. Rearrange the equation to find the time:
t = (change in concentration) / k
The initial concentration of A is 0.850 M, and the final concentration is 0.220 M. So the change in concentration is:
Change in concentration = (0.850 - 0.220) M = 0.630 M
Now, use the given rate constant, k = 0.0170 M·s^(-1), to find the time:
t = (0.630 M) / (0.0170 M·s^(-1)) = 37.06 s
So, it would take approximately 37.06 seconds for the concentration of A to decrease from 0.850 M to 0.220 M at 300 °C.
More on concentration: https://brainly.com/question/14598627
#SPJ11
REACTION STOICHIOMETRYTHE REACTION BETWEEN IODIDE AND IODATE IN THE PRESENCE OF ACIDDeduce the simplest stoichiometry for the ionic reaction between iodide, iodate and acid.Reactants 5+. i-. +. 1 10-3. +. h+Products. 1. i2. +. 3. h2oscribed imagSUBMITThe complete ionic reaction equation will show once the above questions have been completed.
The simplest stoichiometry for the ionic reaction between iodide, iodate, and acid can be deduced from the following balanced equation:
[tex]5I^{-} + IO_{3} ^{-} + 6H^{+} = 3H_{2} O + 3I_{2}[/tex]
This equation shows that 5 moles of iodide, 1 mole of iodate, and 6 moles of acid (protons) react to produce 3 moles of water and 3 moles of iodine. This is the simplest stoichiometry because it represents the lowest whole number ratio of reactants and products in the equation.
This reaction is an example of an oxidation-reduction reaction, where iodide is oxidized to iodine, and iodate is reduced to iodine. The acid serves as a catalyst in this reaction by providing protons that facilitate the transfer of electrons between the iodide and iodate ions.
Overall, reaction stoichiometry is important in determining the amounts of reactants and products involved in a chemical reaction and can be used to calculate reaction yields and other important parameters.
To know more about the stoichiometry:
https://brainly.com/question/30215297
#SPJ11
Which statement is a description of weather?
x
A
B
C
D
The Sun will set in Pensacola today at 7:45 pm.
The temperature in Tampa is 30°C today.
The yearly average rainfall for Jacksonville 50 inches.
Summers in Miami are hot and humid.
a chemist designs a galvanic cell that uses these two half-reactions: mno2 (s) 4h (aq) 2e- mn2 (aq) 2h2o (l) e0red = 1.23 v
A chemist designs a galvanic cell using the given half-reaction: MnO2(s) + 4H+(aq) + 2e- → Mn2+(aq) + 2H2O(l) with an E°red of 1.23 V. In a galvanic cell, two half-reactions occur separately at different electrodes, where one reaction involves reduction and the other oxidation.
The reduction half-reaction provided has a standard reduction potential, which indicates its tendency to gain electrons and be reduced. The overall cell potential will depend on the other half-reaction involved in the galvanic cell, which should be paired with the provided reduction half-reaction. So, a chemist has designed a galvanic cell using the half-reactions of mno2 (s) 4h (aq) 2e- mn2 (aq) and 2h2o (l) e0red = 1.23 V. A galvanic cell is a device that uses a chemical reaction to produce electrical energy. It consists of two half-cells, each containing an electrode and an electrolyte. In this case, the two half-reactions are being used in separate half-cells to generate electrical energy.
The half-reaction mno2 (s) 4h (aq) 2e- mn2 (aq) is the reduction half-reaction, and the half-reaction 2h2o (l) is the oxidation half-reaction. The reduction half-reaction involves the reduction of MnO2 (solid manganese dioxide) to Mn2+ (aqueous manganese ions), with the addition of 4 hydrogen ions and 2 electrons. The oxidation half-reaction involves the oxidation of water molecules to produce oxygen gas and 4 hydrogen ions. The cell potential of the galvanic cell can be calculated by subtracting the reduction potential of the oxidation half-reaction from the reduction potential of the reduction half-reaction. In this case, the reduction potential of the reduction half-reaction is 1.23 V, which is higher than the reduction potential of the oxidation half-reaction (which is 0 V). This means that the cell potential of the galvanic cell is positive, and the reaction will proceed spontaneously.
Learn more about galvanic cells here: brainly.com/question/30268944
#SPJ11
Calculate the molarity of each solution1.93 mol of LiCl in 26.5 l of solution.
The molarity of the LiCl solution is 0.073 M.
To calculate the molarity of the 1.93 mol LiCl in 26.5 L of solution, use the formula:
Molarity (M) = moles of solute / liters of solution
1. Identify the given values: moles of LiCl = 1.93 mol, and volume of solution = 26.5 L.
2. Use the molarity formula: M = moles of solute / liters of solution.
3. Plug in the given values: M = 1.93 mol / 26.5 L.
4. Calculate the molarity: M = 0.073 M (rounded to three decimal places).
5. The molarity of the LiCl solution is 0.073 M. This means there are 0.073 moles of LiCl present in every liter of the solution.
To know more about moles click on below link:
https://brainly.com/question/31597231#
#SPJ11
how many moles of cl2 gas are needed to react with 1.25 grams ot ti02?
The number of moles of Cl₂ gas that are needed to react with 1.25 grams ot TiO₂ is 0.0312 moles Cl₂.
To determine the moles of Cl₂ gas needed to react with 1.25 grams of TiO₂, you'll first need the balanced chemical equation. The reaction is:
TiO₂ + 2Cl₂ → TiCl₄ + O₂
Now, calculate the moles of TiO₂:
1.25 grams TiO₂ * (1 mol TiO₂ / 79.87 g/mol TiO₂) = 0.0156 moles TiO₂
From the balanced equation, the mole ratio is 1:2 or 1 mol of TiO₂ reacts with 2 moles of Cl₂. So, you'll need:
0.0156 moles TiO₂ * (2 moles Cl₂ / 1 mol TiO₂) = 0.0312 moles Cl₂
Therefore, 0.0312 moles of Cl₂ gas are needed to react with 1.25 grams of TiO₂.
Learn more about mole ratio here: https://brainly.com/question/30632038
#SPJ11
Determine whether HI can dissolve 2.05 g Al. yes/no
Yes, HI (hydroiodic acid) can dissolve 2.05 g of Al (aluminum) with the help of AI (anodic index). The reaction between Al and HI produces aluminum iodide and hydrogen gas. The AI helps in determining the corrosion potential, ensuring that the reaction occurs efficiently.
The dissolution of aluminum in hydroiodic acid (HI) is a well-known reaction and can be aided by the use of AI to determine the anodic index, which in turn helps determine the corrosion potential. In this reaction, 2.05 g of aluminum can be dissolved when reacted with hydroiodic acid. The reaction proceeds as follows:
2 Al(s) + 6 HI(aq) → 2 AlI3(aq) + 3 H2(g)
As seen from the balanced chemical equation, the reaction between aluminum and hydroiodic acid produces aluminum iodide (AlI3) and hydrogen gas (H2). The reaction is exothermic, releasing heat in the process.
The use of AI in determining the anodic index is crucial in ensuring that the reaction occurs efficiently. The anodic index is a measure of the relative corrosion resistance of different metals, and it is essential in predicting which metals will corrode when in contact with other metals or in corrosive environments. In the case of aluminum and hydroiodic acid, the anodic index of aluminum is higher than that of hydrogen, meaning that aluminum will corrode in the presence of hydrogen ions. By using AI to determine the anodic index, we can accurately predict the corrosion potential of aluminum in hydroiodic acid, which is necessary for the efficient dissolution of aluminum.
Overall, the use of AI in chemistry and material science has revolutionized our understanding of chemical reactions and their mechanisms. With AI, we can accurately predict the behavior of materials, optimize chemical reactions, and design new materials with specific properties, among other applications.
To know more about hydroiodic acid please refer: https://brainly.com/question/12849140
#SPJ11
2. how should the reagent(s) and/or reaction condition(s) in this experiment be changed to try to produce 1-chlorobutane?
To produce 1-chlorobutane instead of 2-chlorobutane in the experiment, one possible method is to use sodium chloride (NaCl) as a reagent instead of sodium iodide (NaI).
This is because NaCl is less nucleophilic compared to NaI and is less likely to undergo a nucleophilic substitution reaction at the secondary carbon. Another approach is to use a different solvent, such as chloroform, which has a lower polarity and favors SN1 reactions over SN2 reactions.
Additionally, the temperature and concentration of the reactants can also be adjusted to favor the formation of 1-chlorobutane. For example, increasing the temperature or using a higher concentration of the substrate could promote the formation of carbocation intermediates, which are more reactive towards SN1 reactions.
To learn more about sodium chloride click here
brainly.com/question/9811771
#SPJ11
Consider the following situtations involving aqueos ammonia and Cu2+
a. List all species present in a 1.0 M ammonia solution
b. Is the pH of the ammonia solution acidic or basic?
c. Looking at both the Ksp and Kf data, what reactions might occur when a 1.0M ammonia is added to a Cu2+, solution?
d. If a solid precipitate is formed when 1.0 M ammonia is added to Cu2+,what has happened ? Wha is the most likely product?
e. Futhrer addition of 1.0 M ammonia to the solution and precipitate from part d. does not dissolve the precipitate but addition of 15.0 M ammonia does. Explain
a. In a 1.0 M ammonia solution, the species present are NH₃, NH₄⁺, OH⁻, and H₂O.
b. The pH of the ammonia solution is basic .
c. When a 1.0 M ammonia solution is added to a Cu²⁺ solution, the following reactions may occur: Cu²⁺ + 4NH₃ ⇌ [Cu(NH₃)₄]²⁺ and NH₃ + H₂O ⇌ NH₄⁺ + OH⁻.
d. If a solid precipitate is formed when 1.0 M ammonia is added to Cu²⁺, it indicates the formation of a Cu(OH)₂precipitate.
e. The addition of 15.0 M ammonia to the solution and precipitate from part d. dissolves the precipitate
a) The solution that are present in ammonia solution are NH₃, NH₄⁺, OH⁻, and H₂O which formed after dissociation and combination reactions.
b) Because ammonia is a weak base and its dissociation in water produces OH- ions, which increase the pH.
c) The first reaction forms a complex ion and the second reaction contributes to the basicity of the solution.
d) This occurs because the addition of ammonia to the Cu²⁺ solution increases the OH- concentration, leading to the precipitation of Cu(OH)₂.
e) Because the excess ammonia shifts the equilibrium towards the formation of the Cu(NH₃)₄²⁺ complex ion, which is soluble in water. The 1.0 M ammonia solution was not enough to dissolve the precipitate because the equilibrium was not shifted enough towards the complex ion formation.
To know more about complex ion click on below link:
https://brainly.com/question/31418041#
#SPJ11
How much energy is contained in 0.0710 moles of 391 nm light? N_A= 6.022 x 10^23,c= 2.998 x 10^8 m/sec, h = 6.626 X 10^-34 J'sec. a. 2.17 x 10^4 J b. 3.61 x 10^20 J c. None of These d. 2. 17 x 10^5 J e. 3.61 x 10^-29J
The energy contained in 0.0710 moles of 391 nm light is 2.17 x 10^4 J (option a).
How to calculate the energy present in the light?To find the energy contained in 0.0710 moles of 391 nm light, we'll use the following terms: Avogadro's number (N_A), the speed of light (c), and Planck's constant (h) and the below steps can be followed:
1. Convert the wavelength (λ) from nanometers to meters: λ = 391 nm * (1 m / [tex]10^{9}[/tex] nm) = 3.91 x [tex]10^{-7}[/tex] m
2. Calculate the frequency (ν) of the light using the speed of light (c) and the wavelength (λ): ν = c / λ = (2.998 x [tex]10^{8}[/tex] m/sec) / (3.91 x [tex]10^{-7}[/tex] m) = 7.67 x [tex]10^{14}[/tex]Hz
3. Calculate the energy (E) of one photon using Planck's constant (h) and the frequency (ν): E = h * ν = (6.626 x [tex]10^{-34}[/tex] J'sec) * (7.67 x [tex]10^{14}[/tex] Hz) = 5.08 x [tex]10^{-19}[/tex]J
4. Determine the number of photons in 0.0710 moles using Avogadro's number (N_A): number of photons = 0.0710 moles * (6.022 x [tex]10^{23}[/tex] photons/mole) = 4.27 x [tex]10^{}[/tex] photons
5. Calculate the total energy of 0.0710 moles of 391 nm light by multiplying the energy of one photon by the number of photons: Total energy = (5.08 x [tex]10^{-19}[/tex] J) * (4.27 x [tex]10^{22}[/tex] photons) = 2.17 x [tex]10^{4}[/tex]J
To know more about Energy:
https://brainly.com/question/30549107
#SPJ11
What is the molecular formula for each of the following? A 8-carbon hydrocarbon with two pi bond and 1 ring Express your answer as a chemical formula
The molecular formula for this 8-carbon hydrocarbon with two pi bonds and 1 ring is: [tex]C^8H^{12[/tex].
To find the molecular formula for an 8-carbon hydrocarbon with two pi bonds and 1 ring, we'll need to determine the number of hydrogen atoms using the degrees of unsaturation formula. Here are the steps:
1. Calculate the number of degrees of unsaturation: Degrees of Unsaturation = π bonds + rings = 2 π bonds + 1 ring = 3
2. Determine the number of hydrogen atoms using the formula: H = 2C + 2 - 2U, where C is the number of carbon atoms, H is the number of hydrogen atoms, and U is the number of degrees of unsaturation. In this case, C = 8 and U =
3. Calculate the number of hydrogen atoms: H = 2(8) + 2 - 2(3) = 16 + 2 - 6 = 12
To know more about "Molecular formula" refer here:
https://brainly.com/question/30762814#
#SPJ11
For the preparation of the stock solution, 0.01 M HNO3 is used as a diluent rather than deionized water. Explain why.
HNO3 (nitric acid) is a strong acid that can effectively dissociate in water to release H+ ions, which can then protonate any basic sites on the glassware surface that might interfere with the analysis.
Using HNO3 as a diluent ensures that any basic impurities on the glassware are neutralized, and thus minimize their potential to interfere with subsequent experiments. Additionally, using an acid as a diluent can help prevent microbial growth in the solution, as bacteria and other microorganisms are less likely to survive in acidic environments. which can then protonate any basic sites on the glassware surface that might interfere with the analysis. the preparation of the stock solution, 0.01 M HNO3 is used as a diluent rather than deionized water.
Learn more about HNO3 here:
https://brainly.com/question/4611635
#SPJ11
Draw the aldehyde or ketone that the following enone could be prepared from by the aldol reaction Hil ball & stick +labels You do not have to consider stereochemistry . You do not have to explicitly draw H atoms . Do not include lone pairs in your answer.
In the aldol reaction, an aldehyde or ketone reacts with another carbonyl compound, typically an enone, to form a β-hydroxy carbonyl compound.
The reaction involves the nucleophilic addition of the enolate ion (formed from the deprotonation of the α-hydrogen of the carbonyl compound) to the carbonyl group of the aldehyde or ketone.
To identify the aldehyde or ketone that can be prepared from an neon, you would need to work backward from the aldol product by:
1. Identifying the β-hydroxy carbonyl group in the neon.
2. Breaking the bond between the α- and β-carbons.
3. Adding back the carbonyl double bond and a proton to the α-carbon.
Since you don't have to consider stereochemistry or draw lone pairs, you only need to focus on the structure of the aldehyde or ketone.
learn more about stereochemistry Refer: https://brainly.com/question/28658912
#SPJ11
N2 (g) + 3 H2 (g) à 2 NH3 (g)
A)If 0.863 mol NH3 are produced, how many mol N2 must have reacted?
B) If 0.863 mol NH3 are produced, many mol H2 must have reacted?
A)If 0.863 mole of [tex]NH_3[/tex] are produced, 0.4315 moles of [tex]N_2[/tex] must have reacted and B) If 0.863 mol [tex]NH_3[/tex] are produced, 1.2945 mole of [tex]H_2[/tex] must have reacted.
A) To determine the moles of [tex]N_2[/tex] that reacted, we can use the stoichiometric coefficients from the balanced chemical equation: [tex]N_2 (g) + 3 H_2 (g) --> 2 NH_3 (g)[/tex]
According to the balanced equation, 1 mol of [tex]N_2[/tex] reacts to produce 2 mol of [tex]NH_3[/tex]. To find the moles of [tex]N_2[/tex] that reacted to produce 0.863 mol [tex]NH_3[/tex], we can set up a proportion:
(1 mol [tex]N_2[/tex] / 2 mol [tex]NH_3[/tex]) = (x mol [tex]N_2[/tex] / 0.863 mol [tex]NH_3[/tex])
Solving for x:
x mol [tex]N_2[/tex] = (1 mol [tex]N_2[/tex] / 2 mol [tex]NH_3[/tex]) * 0.863 mol [tex]NH_3[/tex]
x mol [tex]N_2[/tex] = 0.4315 mol [tex]N_2[/tex]
So, 0.4315 mol [tex]N_2[/tex] must have reacted.
B) Now, to determine the moles of [tex]H_2[/tex] that reacted, we can use the stoichiometric coefficients again:
According to the balanced equation, 3 mol of [tex]H_2[/tex] reacts to produce 2 mol of [tex]NH_3[/tex]. To find the moles of [tex]H_2[/tex] that reacted to produce 0.863 mol [tex]NH_3[/tex], we can set up another proportion:
(3 mol [tex]H_2[/tex] / 2 mol [tex]NH_3[/tex]) = (y mol [tex]H_2[/tex] / 0.863 mol [tex]NH_3[/tex])
Solving for y:
y mol [tex]H_2[/tex] = (3 mol [tex]H_2[/tex] / 2 mol [tex]NH_3[/tex]) * 0.863 mol [tex]NH_3[/tex]
y mol [tex]H_2[/tex] = 1.2945 mol [tex]H_2[/tex]
So, 1.2945 mol [tex]H_2[/tex] must have reacted.
To learn more about moles click here https://brainly.com/question/26416088
#SPJ11
tripolidine possesses two nitrogen atom(s), although only one of them is available to function as a base.true or false
True. Tripolidine possesses two nitrogen atoms, but only one of them is available to function as a base. This is because the other nitrogen atom is involved in other chemical bonds, limiting its availability to act as a base.
Two nitrogen atoms are securely linked together to form the chemical molecule known as molecular nitrogen (N2). At normal temperatures generally pressures, molecular nitrogen is an odorless, colorless, tasteless, and inert gas. There are four ways that chemists may describe nitrogen compounds.An atom of nitrogen so shares three electrons alongside another atom of nitrogen. As a result, two nitrogen atoms create a triple bond.Nitrogen typically contains 3 bonds, but it may also have 4. If it does, it will be charged upwards. If the nitrogen molecule is negatively charged, nitrogen may potentially have two bonds.
learn more about nitrogen here
https://brainly.com/question/16711904
SPJ11