Plz help I don’t know what to do

The discharge rate of water (Q) that flows across the exit of the pipe in 1.00 seconds is 0.200 [tex]m^3/s[/tex].

Given the following data:

To find the discharge rate of water (Q) that flows across the exit of the pipe in 1.00 seconds assuming that Bernoulli's equation applies:

In this exercise, we would apply Torricelli's Law, which states that the speed of the efflux in an apparatus, under the force of gravity is directly proportional to the square root of the height of the fluid above it.

Mathematically, Torricelli's Law is given by the formula:

[tex]V =\sqrt{2gh}[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]V =\sqrt{2 \times 9.8 (10-2)}\\\\V =\sqrt{19.6 (8)}[/tex]

Speed, V = 12.52 m/s

Now, we can find the discharge rate of the pipe:

[tex]Q = V \times A\\\\Q = 12.52 \times 1.60\times 10^{-2}[/tex]

Discharge rate, Q = 0.200 [tex]m^3/s[/tex]

Read more: https://brainly.com/question/18320053

Answer:

C. Oil is burnt to heat water into steam in order to turn turbines and produce electricity.

Explanation:

Oil is a fossil fuel which found in geologic formations within the earth. It is one of the non-renewable resources found on earth.

Solar, wind, geothermal energy are all renewable sources of energy and any of those choice is wrong.

Answer:

Explanation:What Gives Rise To The Potential Difference Between The Extracellular Fluid ... is much smaller than the resistance of the current path through the axoplasm.

Neurons in the axoplasm is acting like a leaky cable and its resistivity increases with length. The axon membrane will transfer the ions to te organelle called axolemma and thus the resistance of current path is more for axoplasm.

The cytoplasm found inside a neuron's axon is called axoplasm . This may account for more than 99% of the cytoplasm in some types of neuronal cells .

Organelles and other components of the axoplasm are different from those of the dendrites and cell body (soma) of the neuron. Materials are transported to or from the soma through the axoplasm during axonal transport, also referred to as axoplasmic transport.

One characteristic of a neuron's cable is its electrical resistance, or axoplasmic resistance, which influences how quickly an action potential travels down an axon.

The potential will move more slowly if the axoplasm contains a lot of molecules that are not electrically conductive because more ions will pass through.

To find more on axoplasm, refer here:

https://brainly.com/question/14477418

#SPJ5

Answer:

Explanation:

Please see the figure attached for free body diagram .

Taking torque about the hip joint ,

560 x 38 + 100 x 82 = F sin13.5 x 48

21280 + 8200 = 11.2 F

F = 2632.14 N .

Force exerted by the hip on the spine = 2632.14 N .

Answer:

Vx = 35.31 [km/h]

Vy = 18.77 [km/h]

Explanation:

In order to solve this problem, we must decompose the velocity component by means of the angle of 28° using the cosine function of the angle.

[tex]v_{x} = 40*cos(28)\\V_{x} = 35.31 [km/h][/tex]

In order to find the vertical component, we must use the sine function of the angle.

[tex]V_{y}=40*sin(28)\\V_{y} = 18.77 [km/h][/tex]

Answer:

The components of the force in the x and y-direction are -153.21 N and 128.56 N respectively.

Explanation:

Rectangular components of a vector

Given a vector [tex]\vec F[/tex] as an ordered pair (f,θ), where f is the magnitude of the vector and θ is the angle it forms with the positive x-direction, the rectangular components of the vector are given by:

[tex]F_x=f.\cos\theta[/tex]

[tex]F_y=f.\sin\theta[/tex]

The force of f=200N forms an angle of θ=140°. The components of the force are:

[tex]F_x=200.\cos 140^\circ[/tex]

Calculating:

[tex]F_x=-153.21~N[/tex]

[tex]F_y=200.\sin 140^\circ[/tex]

[tex]F_y=128.56~N[/tex]

The components of the force in the x and y-direction are -153.21 N and 128.56 N respectively.

Answer:

Compression

Explanation:

Force is defined as a push or pull on any object. Now, Force could either be in Compression or tension which are the push and pull that allow overhead bridges to remain erect after many years.

Now, Compression is a force that compresses objects together. Meanwhile, Tension is the opposite of compression and it is the force that pulls objects apart.

Answer:

Because a person may be pulled in the direction of the moving train. Thereby causing accident

Explanation:

According to Daniel Bernoulli's theorem, he was widely known as a Mathematician. He stated that due to the higher velocity of a moving train, there is higher kinetic energy in terms of volume around it, while the air pressure between the person and the train becomes lower.

As a result, a person near a moving train may be pulled in the direction of the moving train. Thereby causing accidents that may lead to death.

Answer:

A.REARRANGED AND FORM NEW SUBSTANCES WITH NEW PROPERTIES

Explanation:

Answer:

Because gravity makes you able to stand and move around

Gravity can't fail

it can fail only in astronuts camp and in space

Explanation:

✌❤

Yh....

:)

Answer:

A

Explanation:

Answer:

i think it is B

Explanation:

plants and humans have a cycle thing humans breath out carbon dioxide and plants absorb that and released it as oxygen and animals and humans breath in

Answer:

mars

Explanation:

it is the fourth planet of the solar system

Answer:

here`s your answer

Winds often slow down during an eclipse as the atmosphere temporarily settles. Heating causes the atmosphere to mix and bubble, just like a pot of water on the stove. As it warms, the water level in the pot rises because warm objects, including water, expand. In the case of the atmosphere, it also expands when heated.

Explanation:

Answer:

The number of reaction that must occur is 6.142 x 10¹⁸ reactions / second

Explanation:

Given;

energy released by the fission reaction, E = 173 MeV

power output, P = 170 MW

Convert the energy released by the fission reaction to Joules;

= 173 x 10⁶ x 1.6 x 10⁻¹⁹ J = 2.768 x 10⁻¹¹ J

Convert the output power to joules per second;

= 170 x 10⁶ J/s

The number of reactions per second that must occur is given by;

[tex]= \frac{170*10^6 \ J/s}{2.768*10^{-11} J/reaction} = 6.142 *10^{18} \ reaction/second[/tex]

Therefore, the number of reaction that must occur is 6.142 x 10¹⁸ reactions / second

Answer: The force was 13.92 Newtons.

Explanation:

First, let's recall the second Newton's law:

The net force is equal to the mass times the acceleration, or:

F = m*a

where:

F = force

m = mass

a = acceleration.

When the player hits the ball with the bat, he applies a force that accelerates the ball for a small period of time, that increases greatly the speed of the ball.

In this case, we know that:

the mass of the ball is 0.145 kg

The acceleration of the ball is 96m/s^2

Then we can input those values in the above equation to find the force.

F = 0.145kg*96m/s^2 = 13.92 N

The force was 13.92 Newtons.

Explanation:

so sorry

don't know but please mark me as brainliest please

Answer:

1080J

Explanation:

Given parameters:

Mass of object  = 2kg

Velocity  = 10m/s

Height  = 50m

Unknown:

Total energy  = ?

Solution:

The total energy of the moving object is obtainable by summing the kinetic and potential energy;

       Total energy  = P.E + K.E

P.E is the potential energy  = mgh

K.E is the kinetic energy = [tex]\frac{1}{2}[/tex]mv²

 Now insert the parameters and solve;

    Total energy  = mgh +  [tex]\frac{1}{2}[/tex]mv²

m is the mass

g is the acceleration due to gravity

h is the height

v is the velocity

  Total energy  = (2 x 9.8 x 50) +  ( [tex]\frac{1}{2}[/tex] x 2 x 10²)

  Total energy  = 980 + 100 = 1080J

Answer:

[tex]\alpha =1\ rad/s^2[/tex]

Explanation:

It is given that,

The radius of a wheel, r = 2 m

Tangential acceleration of the wheel, [tex]a=2\ m/s^2[/tex]

We need to find the angular acceleration of the wheel. We know that the relation between angular and tangential acceleration is given by :

[tex]a=\alpha r\\\\\alpha =\dfrac{a}{r}\\\\\alpha =\dfrac{2}{2}\\\\\alpha =1\ rad/s^2[/tex]

So, the angular acceleration of the wheel is [tex]1\ rad/s^2[/tex].

Answer:

A systematic error may result in a high degree of precision.

A systematic error will likely result in poor accuracy

Explanation:

It's what my work gave me when I got it wrong

Answer:

a)  F₃ = 109.5 N ,     θ₃ = 38.35,  b)   m = 0.429 kg

Explanation:

For this force addition exercise, let's decompose the forces into a coordinate system

strength 1

          cos 70 = F₁ₓ / F₁

          sin 70 = [tex]F_{1y}[/tex] / F₁

          F₁ₓ = F₁ cos 70

         F_{1y} = F₁ sin 70

          F₁ₓ = 45 cos 70 = 15.39 N

          F_{1y} = 45 sin70 = 42.29 N

Strength 2

         cos 20 = F₂ₓ / F₂

         sin 20 = F_{2y} / F₂

         F₂ₓ = F₂ cos 20

         F_{2y} = F₂ sin20

         F₂ₓ = 75 cos 20 = 70.48 N

         F_{2y} = 75 sin 20 = 25.65 N

a) in the first part we are asked to find the magnitude of force 3 so that the body is in equilibrium

X axis

         ∑ Fₓ = 0

          F₁ₓ + F₂ₓ + F₃ₓ = 0

          F₃ₓ = - F₁ₓ - F₂ₓ

          F₃ₓ = - 15.39 - 70.48

          F₃ₓ = - 85.87 N

Y Axis

         ∑ F_{y}  = 0

         F_{1y} + F_{2y} +F_{3y}  = 0

         F_{3y} = - F_{1y} -F_{2y}

         F_{3y} = - 42.29 - 25.65

         F_{3y} = - 67.94 N

the magnitude of this force can be found using the Pythagorean theorem

         F₃ = √ (F₃ₓ² + F_{3y}^2)

         F₃ = √ (85.87² + 67.94²)

         F₃ = 109.5 N

The direction of this force can be found using trigonometry

          tan θ =  F₃ = [tex]F_{3y}[/tex] / F₃ₓ

          θ₃ = Tan⁻¹ (67.94 / (85.87))

          θ₃ = 38.35º

since the two vectors are negative this angle is in the third quadrant, measured from the positive side of the x axis is

          θ₃ = 180 + 38.53

          θ₃ = 218.35º

b) I think you have an error in your statement, we have two possibilities:

1) If we eliminate the third force, what is the mass

it should say: "if we apply the third force force ...", they ask that we find the masses of the vehicle, let's use Newton's second law

X axis

       F₁ₓ + F₂ₓ = m a

       15.39 + 70.48 = m 200

        m = 85.87 / 200

        m = 0.429 kg

2) If the force F3 is in the first quadrant

        F1x + F2x + F3x = m a

        m = (15.39 + 70.48 + 85.87) / 200

        m = 0.8587 kg

Answer

bullying is not something that should be allowed in school or anywhere at that matter because by being bullied can lead to many things such as harm attempts and risks of kids lives. bullying is always impacted by kids when they're small and ends up making their lives a miserable buy bullying kids and adults too no matter what age what end up turning either suicidal or trying to face drugs thinking that it's going to help period and we lose lives every day many many lives because of the things that people say and do to each other and that's not right at all whatsoever. people need to be able to live their lives the way they wants to without having to think about is somebody's going to believe them because of the way they look the way they were their clothes and stuff like that. We were made us a certain way not for us to believe one another and harm each other. but it's also not good for our mental and emotional health because of later on we're not going to be stable because we're always pressing ourselves about how we look. and there's not only in person bullying but also cyberbullying and if you look up online you'll find out that in 2018 student was the highest awareness of cyberbullying in all the countries people commit different types of s. u. I. c. I. d. e. because of that and I feel like nobody cares about that but those are people's lives and people lose their loved ones because of bullying. people don't believe that other people matter but in the end we all do and we all should be able to live our lives fully.

Answer:

Motion

Explanation:

I just took the test :)

P.S. Can I please get a brainliest (look at my account to see what i do with the points :p)

Kinetic energy is the energy that set an object or body in motion. Motion result in kinetic energy.

Kinetic energy is the energy required to set an object in motion.

It is the energy present in a moving body. This involve the movement of an object from one place to another as it is found in a moving ball or car.

Therefore, motion result in kinetic energy.

Learn more about kinetic energy from the link below.

https://brainly.com/question/8101588

Given:

Mass of cheetah (m) = 72.2 kg

Speed of cheetah (v) = 25.9 m/s

Equation:

[tex] \rm KE = \dfrac{1}{2} mv^2[/tex]

Answer:

By substituting values in the equation, we get:

[tex] \rm KE = \dfrac{1}{2} \times 72.2 \times (25.9)^2 \\ \\ \rm = \dfrac{1}{2} \times 72.2 \times 670.81 \\ \\ \rm = 36.1 \times 670.81 \\ \\ \rm = 24,216.241 \\ \\ \rm \approx 24,200 \ J[/tex]

[tex] \therefore [/tex] Kinetic energy of cheetah = 24,200 J

Answer:

There would be more hours of sunlight at the equator

Answer:

hypothesis

Explanation: a hypothesis is a guess or a thought meaning it can be true but it might not be

Answer:

capable of being proven wrong.

Explanation:

You can't not be right all the time

PHYSICS

mass = 55 kg

gravitation earth = 9,8 m/s²

gravitation moon = 1,62 m/s²

Weight Change = ______?

Answer :

1) Earth

[tex]w = m \times g[/tex]

w = 55 × 9,8

w = 539 N

2) Moon

[tex]w \: = m \times g[/tex]

w = 55 × 1,62

w = 89.1 N

Answer:

Explanation:

given data

Force applied F= 1N

extension e= 0.1m

let us find the spring constant first

applying

F=ke

k=F/e

k=1/0.1

k=10N/m

Step two:

Required is the work done

we know that the expression/formula for the work done by a spring is given as

Wd=1/2kx^2

x=0.4m

substitute

Wd= 1/2*10*0.4^2

Wd=0.5*10*0.16

Wd=0.5J

Your f(x) value is a little ambiguous, so I am assuming the value of f(x)=2x-1

Answer:

(f-g)(x) = 2x-x²+6

Explanation:

f(x)=2x-1

g(x)=x²-7

(f-g)(x)=f(x)-g(x)

          = (2x-1)-(x²-7)

          = 2x-1-x²+7

          = 2x-x²+6

Therefore,

(f-g)(x) = 2x-x²+6

Answer:

option D is correct

Explanation:

Answer: “ D ”

the amount of time it takes for half of a radioactive isotope sample to decay