how many grams of nickel(ii) sulfate, niso4 (molar mass = 154.8g/mol) must be dissolved in 288.0 g of water to raise the boiling point by 0.350 oc? (kbp = 0.51 oc/m)

The 0.1 M aqueous solution that can be used to confirm the identity of the solid is HCl(aq). This solution will react differently with NaHCO₃, AgNO₃, Na₂S, or CaBr₂, helping you identify the white solid.


a. NH₃(aq) - Ammonia will not react with any of these compounds in a distinctive way to confirm their identity.

b. HCl(aq) - Hydrochloric acid will react with NaHCO₃ to produce CO₂ gas, with AgNO₃ to form a white precipitate of AgCl, and with Na₂S to form a rotten egg smell due to the production of H₂S gas. It will not react significantly with CaBr₂.

c. NaOH(aq) - Sodium hydroxide will not react in a unique way with the given compounds to determine the identity of the solid.

d. KCl(aq) - Potassium chloride will not react with any of these compounds in a distinctive manner to identify the solid.

By using HCl(aq) and observing the specific reactions, you can determine which solid you have in your sample.

To know more about Hydrochloric acid click on below link:

https://brainly.com/question/15231576#

#SPJ11

The polar and non-polar surface areas of a molecule can be used to describe the relative polarity of the molecule because the polar surface area of a molecule is the portion of the molecule that contains polar bonds or polar functional groups.

while the non-polar surface area of a molecule is the portion of the molecule that does not contain polar bonds or functional groups. Generally, molecules with larger polar surface areas are more polar, and molecules with larger non-polar surface areas are less polar. This is because the polar surface area of a molecule determines its ability to interact with other polar molecules through dipole-dipole interactions, while the non-polar surface area determines its ability to interact with non-polar molecules through van der Waals forces. Therefore, a molecule with a larger polar surface area will be more likely to dissolve in polar solvents, while a molecule with a larger non-polar surface area will be more likely to dissolve in non-polar solvents.

learn more about non-polar surface here:

https://brainly.com/question/29279446

#SPJ11

Answer:

D

Explanation:

The percentage ionization of a 0.150 M solution of NH3 at 25°C is approximately 0.0194%.

The base ionization constant, Kb, for NH3 is 1.8 x 10^-5. This means that NH3 partially ionizes in water to form OH- ions. To calculate the percentage ionization, we can use the equation for Kb: Kb = [OH-][NH3]/[NH4+].

Since NH3 is a weak base, we can assume that the change in concentration of NH3 due to ionization is negligible compared to the initial concentration of NH3.

Therefore, we can approximate the concentration of NH3 as its initial concentration, which is 0.150 M. Substituting the values into the equation and solving for [OH-], we get [OH-] ≈ 1.8 x 10^-6 M. Finally, we can calculate the percentage ionization as ([OH-]/[NH3]) x 100, which is approximately 0.0194%.

For more questions like Concentration click the link below:

https://brainly.com/question/10725862

#SPJ11

Examples of glycosaminoglycans (GAGs) include hyaluronic acid, chondroitin sulfate, dermatan sulfate, heparan sulfate, and keratan sulfate.

Glycosaminoglycans (GAGs) are heteropolysaccharides composed of repeating disaccharide units, which have specific characteristics that allow them to be identified as GAGs. Examples of glycosaminoglycans include:

1. Hyaluronic acid
2. Chondroitin sulfate
3. Keratan sulfate
4. Dermatan sulfate
5. Heparan sulfate
6. Heparin

These GAGs can be found in various connective tissue, cartilage, and the extracellular matrix, playing essential roles in maintaining the structure and function of these tissues.

To know more about Glycosaminoglycans:

https://brainly.com/question/13887418

#SPJ11

The dash-wedge structure for (3S,4R)-4-fluoro-2,4-dimethylheptan-3-ol can be drawn as follows:

To draw a dash-wedge structure for a molecule, we need to first determine the stereochemistry of each chiral center in the molecule.

The prefix (3S,4R) in the given compound indicates that the hydroxyl group (-OH) at the third carbon (C3) is on the same side (S) as the lowest priority group (hydrogen, H) and the methyl group (-CH3) at the fourth carbon (C4) is on the opposite side (R) of the molecule.

Next, we need to draw a skeletal structure of the compound and add the substituent groups at each carbon. The given compound has a seven-carbon chain with a methyl group (-CH3) and a fluoro group (-F) attached to the fourth carbon (C4) and a hydroxyl group (-OH) attached to the third carbon (C3).

To draw the dash-wedge structure, we represent bonds that are in the plane of the paper with a solid line, bonds that extend out of the plane of the paper with a wedge, and bonds that extend into the plane of the paper with a dash. Using this convention, we can draw the dash-wedge structure of (3S,4R)-4-fluoro-2,4-dimethylheptan-3-ol, as shown above.

For more questions like Bond click the link below:

https://brainly.com/question/28489869

#SPJ11

A. 85.75% carbon . The percent by mass of carbon in the hydrocarbon, first, we need to find the mass of carbon in the sample. We are given the mass of hydrogen as 2.86 g. Since the hydrocarbon contains only carbon and hydrogen, the remaining mass must be carbon.

To find the percent by mass of carbon in the hydrocarbon, we first need to calculate the mass of carbon in the sample.

Mass of carbon = Total mass of sample - Mass of hydrogen in the sample

Mass of carbon = 20.0 g - 2.86 g

Mass of carbon = 17.14 g

Now we can calculate the percent by mass of carbon:

Percent by mass of carbon = (Mass of carbon / Total mass of sample) x 100%

Percent by mass of carbon = (17.14 g / 20.0 g) x 100%

Percent by mass of carbon = 85.7%

Therefore, the correct answer is A. 85.75 carbon.

Learn more about hydrocarbon here:

https://brainly.com/question/30907363

#SPJ11

To determine the molarity of a solution prepared by dissolving 10.7 g of NaI in 0.250 L of water, follow these steps:

1. Calculate the moles of NaI by dividing the mass (10.7 g) by the molar mass of NaI. The molar mass of NaI is 22.99 g/mol (Na) + 126.90 g/mol (I) = 149.89 g/mol.
  Moles of NaI = 10.7 g / 149.89 g/mol = 0.0714 mol

2. Calculate the molarity by dividing the moles of NaI (0.0714 mol) by the volume of water in liters (0.250 L).
  Molarity = 0.0714 mol / 0.250 L = 0.286 M

So, the molarity of the solution prepared by dissolving 10.7 g of NaI in 0.250 L of water is 0.286, corresponding to option B.

Learn more about molarity: What is the concentration in molarity of an aqueous solution which contains 5.21% by mass ethylene glycol (mm=62.07g/mol)?  https://brainly.com/question/14469428

#SPJ11

The de Broglie wavelength of a hydrogen atom traveling at 455 m/s is approximately: 572 picometers.

To calculate the de Broglie wavelength of a hydrogen atom traveling at 455 m/s. Here's a step-by-step explanation:

1. The de Broglie wavelength formula is:
λ = h / (m * v),
where λ is the wavelength,
h is Planck's constant (6.626 x [tex]10^{-34[/tex] Js),
m is the mass of the particle, and
v is its velocity.

2. The mass of a hydrogen atom is approximately 1.67 x [tex]10^{-27[/tex] kg.

3. Plug the values into the formula: λ = (6.626 x [tex]10^{-34[/tex] Js) / ((1.67 x [tex]10^{-27[/tex]kg) * (455 m/s))

4. Calculate the result: λ ≈ 5.72 x [tex]10^{-10[/tex] m

5. Convert the result to picometers: 1 meter = 1 x [tex]10^{12[/tex] picometers, so λ ≈ 5.72 x [tex]10^{-10[/tex] m * 1 x [tex]10^{12[/tex] pm/m ≈ 572 pm

To know more about "de Broglie wavelength" refer here:

https://brainly.com/question/17295250#

#SPJ11

The de Broglie wavelength of a hydrogen atom traveling at 455 m/s is approximately: 572 picometers.

To calculate the de Broglie wavelength of a hydrogen atom traveling at 455 m/s. Here's a step-by-step explanation:

1. The de Broglie wavelength formula is:
λ = h / (m * v),
where λ is the wavelength,
h is Planck's constant (6.626 x [tex]10^{-34[/tex] Js),
m is the mass of the particle, and
v is its velocity.

2. The mass of a hydrogen atom is approximately 1.67 x [tex]10^{-27[/tex] kg.

3. Plug the values into the formula: λ = (6.626 x [tex]10^{-34[/tex] Js) / ((1.67 x [tex]10^{-27[/tex]kg) * (455 m/s))

4. Calculate the result: λ ≈ 5.72 x [tex]10^{-10[/tex] m

5. Convert the result to picometers: 1 meter = 1 x [tex]10^{12[/tex] picometers, so λ ≈ 5.72 x [tex]10^{-10[/tex] m * 1 x [tex]10^{12[/tex] pm/m ≈ 572 pm

To know more about "de Broglie wavelength" refer here:

https://brainly.com/question/17295250#

#SPJ11

At a wave length of 605 nm, hemoglobin is significantly higher than cytochrome. Cytochrome is significantly higher at a wavelength of 530 nm.

If the solution is dilute, there may be a lower concentration of both hemoglobin and cytochrome c, which could make it easier to measure at a higher wavelength such as 430 nm. This is because absorbance is directly proportional to concentration, so a lower concentration of molecules will result in a lower absorbance. Measuring at a higher wavelength may also reduce interference from other compounds in the solution that absorb at lower wavelengths.

Regarding ion exchange chromatography, this technique separates molecules based on their charge, which is related to their chemical properties. By using a charged resin, molecules with different charges can be separated and collected in different fractions. The choice of which wavelength to measure absorbance at may depend on the specific properties of the molecules being separated and the conditions of the experiment.

Find out more on cytochrome here: https://brainly.com/question/24042339

#SPJ1

The pH of a 0.15 M aqueous solution of KF is 5.83, which is option B.

Kb of fluoride ion (F-) can be calculated by using the Kw expression (Kw = Ka x Kb), where Kw is the ion product constant for water, Ka is the acid dissociation constant of HF, and Kb is the base dissociation constant of F-.

Kw = Ka x Kb

1.0 x 10⁻¹⁴ = (7.0 x 10⁻⁴) x Kb

Kb = 1.43 x 10⁻¹¹

Now, use the Kb expression for F- to calculate the concentration of OH- ion, and then use the equation for Kw (Kw = [H+][OH-]) to calculate the concentration of H+ ion, and thus the pH.

pH = -log[H+] = 5.83

Therefore, the pH of a 0.15 M aqueous solution of KF is 5.83, which is option B.

Learn More about aqueous solution:

https://brainly.com/question/18761928

#SPJ4

A colloid consists of a medium called the continuous phase (analogous to the solvent in a solution) and large particles called the dispersed phase (analogous to the solute in a solution).

The continuous phase is the substance in which the dispersed phase is distributed, while the dispersed phase is the particles suspended in the continuous phase.

This unique structure allows colloids to exhibit properties different from those of true solutions, such as the Tyndall effect, in which light is scattered by the suspended particles.

To know more about Tyndall effect click on below link:

https://brainly.com/question/14431922#

#SPJ11

To write a balanced chemical equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. This is done by adjusting the coefficients (the numbers in front of each compound or element) until the equation is balanced.

For example, let's balance the equation for the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O):

H2 + O2 -> H2O

To balance this equation, we need to add a coefficient of 2 in front of H2O:

2H2 + O2 -> 2H2O

Now the equation is balanced, with 2 atoms of hydrogen and 2 atoms of oxygen on both sides.

The stoichiometric coefficients are the numbers in front of each compound or element in the balanced chemical equation. These coefficients tell us the relative number of molecules or moles of each substance involved in the reaction.

The sum of the stoichiometric coefficients is simply the sum of all the coefficients in the balanced chemical equation. For the above example, the sum of the coefficients is:

2 + 1 + 2 + 2 = 7

So the sum of the stoichiometric coefficients for this balanced chemical reaction is 7.
Hello! To help you with your question, let's consider a simple chemical reaction:

Hydrogen gas (H₂) reacts with oxygen gas (O₂) to form water (H₂O).

Now, to balance the chemical equation, we need to ensure that the number of atoms for each element is equal on both sides of the equation. The balanced chemical equation for this reaction is:

2H₂ + O₂ → 2H₂O

In this equation, the stoichiometric coefficients are the numbers in front of the chemical species, which are 2 for H₂, 1 for O₂, and 2 for H₂O. To find the sum of the stoichiometric coefficients, add these coefficients together:

2 (for H₂) + 1 (for O₂) + 2 (for H₂O) = 5

Therefore, the sum of the coefficients for the balanced chemical reaction is 5.

Learn more about chemical equation here;

https://brainly.com/question/30087623

#SPJ11

The estimated mean ionic activity coefficient (γ±) of CaCl₂ in a 0.010 M CaCl₂(aq) and 0.030 M NaF(aq) solution is approximately 0.71, and the activity (A) of CaCl₂ is approximately 0.0071.

To estimate the mean ionic activity coefficient, first, calculate the ionic strength (I) of the solution:
I = 0.5 * (0.010 * (2^2) + 0.030 * (1^2 + 1^2)) = 0.035 M

Then, use the Debye-Hückel limiting law to estimate the mean ionic activity coefficient (γ±) for CaCl₂:
log(γ±) = -0.509 * √(0.035) / (1 + (1.5 * 0.702) * √(0.035))
γ± ≈ 0.71

Finally, calculate the activity (A) of CaCl₂ by multiplying the mean ionic activity coefficient (γ±) by the molar concentration (C) of CaCl₂:
A = γ± * C = 0.71 * 0.010 M ≈ 0.0071

To know more about ionic strength click on below link:

https://brainly.com/question/28145535#

#SPJ11

The estimated mean ionic activity coefficient (γ±) of CaCl₂ in a 0.010 M CaCl₂(aq) and 0.030 M NaF(aq) solution is approximately 0.71, and the activity (A) of CaCl₂ is approximately 0.0071.

To estimate the mean ionic activity coefficient, first, calculate the ionic strength (I) of the solution:
I = 0.5 * (0.010 * (2^2) + 0.030 * (1^2 + 1^2)) = 0.035 M

Then, use the Debye-Hückel limiting law to estimate the mean ionic activity coefficient (γ±) for CaCl₂:
log(γ±) = -0.509 * √(0.035) / (1 + (1.5 * 0.702) * √(0.035))
γ± ≈ 0.71

Finally, calculate the activity (A) of CaCl₂ by multiplying the mean ionic activity coefficient (γ±) by the molar concentration (C) of CaCl₂:
A = γ± * C = 0.71 * 0.010 M ≈ 0.0071

To know more about ionic strength click on below link:

https://brainly.com/question/28145535#

#SPJ11

The concentration of PO₄³⁻(aq) in a saturated aqueous solution of Cu₃(PO₄)₂(s) is approximately 4.61 x 10⁻⁸ M.

To calculate the concentration of PO₄³⁻(aq) in a saturated aqueous solution of Cu₃(PO₄)₂(s), you can use the Ksp expression for the dissolution of Cu₃(PO₄)₂:

Ksp = [Cu²⁺]³[PO₄³⁻]²

Given that Ksp = 1.40 x 10⁻³⁷, let x represent the concentration of PO₄³⁻:

[Cu²⁺] = 3x
[PO₄³⁻] = x

Substitute these values into the Ksp expression:

1.40 x 10⁻³⁷ = (3x)³ * (x)²

Now, solve for x (concentration of PO₄³⁻):

x⁵ = 1.40 x 10⁻³⁷ / 27
x = (1.40 x 10⁻³⁷ / 27)^(1/5)
x ≈ 4.61 x 10⁻⁸ M

The concentration of PO₄³⁻(aq) in a saturated aqueous solution of Cu₃(PO₄)₂(s) is approximately 4.61 x 10⁻⁸ M.

Learn more about Ksp expression here: https://brainly.com/question/29557204

#SPJ11

The name of the compound is (Z)-4,5-dimethyl-4-hepten-1-ol.

It contains a double bond (hence the "en" ending) between the 4th and 5th carbons from the end, and a hydroxyl group (-OH) attached to the 1st carbon.

The "dimethyl" prefix indicates that there are two methyl groups (-CH3) attached to the 4th carbon,

The "hepten" prefix indicates that there are seven carbons in the molecule with a double bond between the 4th and 5th carbons.

The "ol" ending indicates that it is an alcohol with the hydroxyl group attached to the 1st carbon.

Learn more about methyl groups here:

https://brainly.com/question/12904781

#SPJ11

The reaction between chloride ion and metal aquo complexes of metals like copper, silver, or gold is expected to be most extensive, while the reaction with metal aquo complexes of alkali metals or alkaline earth metals is expected to be least extensive.

The extent of the reaction between a metal aquo complex and chloride ion can be determined by comparing the stability constants (also known as formation constants or equilibrium constants) of the metal aquo complex with chloride ion for different metals. The stability constants of metal aquo complexes can vary depending on the specific metal ion and the coordination chemistry involved. Typically, transition metal ions with high charge and small ionic radius tend to form more stable aquo complexes, while those with lower charge or larger ionic radius tend to form less stable aquo complexes.

For example, metals like copper (Cu), silver (Ag), and gold (Au) tend to form stable aquo complexes with high stability constants, and their reactions with chloride ion can be more extensive. On the other hand, metals like alkali metals (e.g., sodium (Na), potassium (K), etc.) and alkaline earth metals (e.g., calcium (Ca), magnesium (Mg), etc.) tend to form less stable aquo complexes with lower stability constants, and their reactions with chloride ion can be less extensive.

Therefore, the reaction with chloride ion is most extensive for metal aquo complexes with higher charge and smaller size, such as Fe3+ and Al3+. On the other hand, metal aquo complexes with lower charge and larger size, such as Mg2+ and Ca2+, tend to form less stable chloride complexes and the reaction is least extensive with chloride ion for these metals.

To know more about Metal Aquo Complexes:

https://brainly.com/question/28383638

#SPJ11

To convert d-erythrose into d-ribose the reagent is Nitromethane, Sodium borohydride, Sodium periodate, Sodium periodate. The other product formed in this process is 3-amino-2,3-dideoxyketose.

To convert d-erythrose into d-ribose, the reagents required are:

Nitromethane: It reacts with d-erythrose to form a nitroaldol product.

Sodium borohydride: This reduces the nitro group to an amino group.

Sodium periodate: This selectively oxidizes the vicinal diol in the aminoaldose product to form the corresponding dialdehyde.

The reaction pathway can be represented as follows:

d-erythrose -> Nitromethane (in the presence of a base) -> Nitroaldol product -> Sodium borohydride -> Aminoaldose product -> Sodium periodate -> Dialdehyde -> d-ribose.

learn more about Nitromethane here:

https://brainly.com/question/19578949

#SPJ11

The hardness of water in units of mg/L of CaCO₃, given that your titration at pH = 10 resulted in a concentration of 15 mmol/L, is 1500 mg/L.

To calculate the hardness of water in mg/L of CaCO₃, we can use the following formula:

Hardness (mg/L CaCO₃) = Concentration (mmol/L) * Molecular Weight of CaCO₃ * 1000

The molecular weight of CaCO₃ is 100.0869 g/mol. Given that the titration at pH = 10 resulted in a concentration of 15 mmol/L, we can now calculate the hardness:

Hardness = 15 mmol/L * 100.0869 g/mol * 1000 mg/g
Hardness = 1500.304 mg/L

Rounding the answer to the nearest whole number, we get:

Hardness = 1500 mg/L

So, the hardness of the water is 1500 mg/L of CaCO₃.

Learn more about hardness of water here: https://brainly.com/question/30322659

#SPJ11

The cobalt equilibrium will be affected if you use concentrated H₂SO₄ instead of HCl because H₂SO₄ is a stronger acid than HCl.

The cobalt equilibrium refers to the equilibrium between cobalt ions and water. When HCl is added to the solution, it reacts with water to form H₃O⁺ ions, which shift the equilibrium towards the formation of more Co(H₂O)₆³⁺ ions.

If concentrated H₂SO₄ is used instead of HCl, it would react with water to form H₃O⁴ and HSO₄⁺ ions. This would still shift the equilibrium towards the formation of more Co(H₂O)₆³⁺ ions, but the concentration of H⁺ ions would be lower than if HCl was used. This means that the equilibrium shift would not be as significant as with HCl, and the overall effect on the cobalt equilibrium would be less pronounced.

Learn more about cobalt: https://brainly.com/question/31110063

#SPJ11

The given statement "For a time series simple moving average, a shorter period will be smoother than larger period because shorter periods do not react as quickly" is false. Because, for time series for simple moving average, is a shorter period will be less smooth than to a larger period.

This is because a shorter period means that the moving average is calculated using fewer data points, so it will be more sensitive to fluctuations in the data. In other words, a shorter period will react more quickly to changes in the data, which can result in a less smooth curve.

Conversely, a longer period will be smoother because it is calculated using more data points, which makes it less sensitive to short-term fluctuations in the data.

To know more about shorter period here

https://brainly.com/question/11397449

#SPJ4

It can neutralize a mass of HCl equal to 0.326 g before the pH falls below 9.00.

For the first buffer solution of 110.0 ml containing 0.105 M NH₃ and 0.125 M NH₄Br, it can neutralize a mass of HCl equal to 0.162 g before the pH falls below 9.00. For the second buffer solution of the same it can neutralize a mass of HCl equal to 0.326 g before the pH falls below 9.00., 0.260 M NH₃, and 0.400 M NH₄Br, it can neutralize a mass of HCl equal to 0.326 g before the pH falls below 9.00.

To calculate the mass of HCl that can be neutralized, we need to calculate the moles of NH₃ and NH₄Br in the buffer solution and find the limiting reagent. Then, we can use the balanced equation between NH₃, NH₄⁺, and HCl to find the moles of HCl that can be neutralized. Finally, we can convert the moles of HCl to grams using the molar mass of HCl.

For the first buffer solution, the moles of NH₃ and NH₄Br are 0.0116 and 0.0138, respectively. Since NH₃ is the limiting reagent, we can use the balanced equation NH₃ + HCl → NH₄⁺ + Cl⁻ to find that 0.0116 moles of HCl can be neutralized. Converting moles of HCl to grams gives us 0.162 g.

For the second buffer solution, the moles of NH₃ and NH₄Br are 0.0286 and 0.0440, respectively. Again, NH₃ is the limiting reagent, and using the balanced equation gives us 0.0286 moles of HCl neutralized. Converting to grams gives us 0.326 g.

learn more about neutralize here:

https://brainly.com/question/27891712

#SPJ11

There are two types of substances, they are combustible and non-combustible substances. Those substances which undergo combustion are defined as the combustible substances. Here the mass of ethanol is 3832.26 g.

The process in which a substance burns in the presence of oxygen to produce heat and light can be defined as the combustion. The products of the combustion reaction are carbon-dioxide and water.

The combustion of ethanol is:

C₂H₅OH  +  3O₂  →  2CO₂  +  3H₂O

1 mol of ethanol, you can make 3 mole of water.

Moles of water = mass / Molar mass = 500.0 / 18 = 27.77

27.77 mole came from 27.77 × 3 / 1 = 83.31 mole of ethanol

Molar mass ethanol = 46 g/mol

Mass =  83.31 ×  46 = 3832.26 g

To know more about combustion, visit;

https://brainly.com/question/14283641

#SPJ1

The concentration of NH₄Cl is 0.39 M, which means the concentration of NH⁴⁺ and Cl⁻ is also 0.39 M. The pH of the solution will be obtained after calculation as 9.665.

The first step to solve this problem is to write the equation for the reaction of  NH₄Cl with water:

NH₄Cl + H₂O → NH⁴⁺ + Cl⁻ + H₃O⁺

The concentration of  NH₄Cl is 0.39 M, which means the concentration of  NH⁴⁺  and Cl⁻ is also 0.39 M. At equilibrium, the concentration of  H₃O⁺ can be calculated using the equilibrium constant expression for the reaction of NH⁴⁺ with water:

Kb = [NH⁴⁺ ][OH⁻]/[NH₃]

Kb for NH₃ is 1.8 × 10⁻⁵, so:

4.74 = -㏒(Kb) = -㏒([NH⁴⁺ ][OH⁻]/[NH₃])

Solving for [OH⁻], we get:

[OH⁻] = Kb[NH₃]/[NH⁴⁺] = 1.8 × 10⁻⁵ / 0.39 = 4.62 × 10⁻⁵ M

Finally, we can use the equation for the ion product of water to find the concentration of H₃O⁺:

Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴

[H₃O⁺] = Kw / [OH⁻] = 1.0 × 10⁻¹⁴/ 4.62 × 10⁻⁵ = 2.16 × 10⁻¹⁰ M

Taking the negative logarithm of [H₃O⁺], we get the pH of the solution:

pH = -㏒[H₃O⁺] = -㏒(2.16 × 10⁻¹⁰) = 9.665

Therefore, the pH of the solution is 9.665.

Learn more about pH of a solution here :

https://brainly.com/question/30934747

#SPJ1

[C6H5NH+3] = 0.210 M
[Cl?] = 0.210 M
[C6H5NH2] = 0 M (this is the conjugate base and is not present in acidic solution)
[H3O+] = 3.0 x 10^-5 M
[OH?] = 3.0 x 10^-10 M

Note: The values for [H3O+] and [OH?] were calculated assuming the C6H5NH3Cl solution was at room temperature (25°C) and had a pH of 4.52 (determined using the Ka value for C6H5NH3+, which is 4.87 x 10^-10).
To calculate the concentration of all species in a 0.210 M C6H5NH3Cl solution, we first need to identify the species present in the solution:

1. C6H5NH3+ (cation from the acid)
2. Cl- (anion from the salt)
3. C6H5NH2 (the base)
4. H3O+ (hydronium ion)
5. OH- (hydroxide ion)

Since C6H5NH3Cl is a weak acid, we can assume that it does not completely dissociate in water. Therefore, the initial concentration of C6H5NH3+ and Cl- ions will be 0.210 M each. The concentration of C6H5NH2, H3O+, and OH- can be considered negligible in comparison. Thus, the concentrations are:

[C6H5NH3+] = 0.210 M
[Cl-] = 0.210 M
[C6H5NH2] ≈ 0 M
[H3O+] ≈ 0 M
[OH-] ≈ 0 M

Your answer: 0.210, 0.210, 0, 0, 0

Visit here to learn more about cation brainly.com/question/1333307

#SPJ11

The factor by which the RMS speed changes when the temperature (T) of a gas doubles is given by the square root of 2, or approximately 1.414.

The RMS (root mean square) speed of a gas is directly related to its temperature by the equation v_rms = √(3kT/m), where k is the Boltzmann constant and m is the mass of a single molecule. When the temperature (T) doubles, the new RMS speed becomes v'_rms = √(3k(2T)/m).

To find the factor by which the RMS speed changes, divide the new RMS speed by the original: v'_rms/v_rms = √(3k(2T)/m) ÷ √(3kT/m) = √2. Thus, when the temperature doubles, the RMS speed changes by a factor of √2 or approximately 1.414.

To know more about RMS speed click on below link:

https://brainly.com/question/12896215#

#SPJ11

A scientist should collect data, then state the question. This describes the correct order for using the scientific method. Therefore, the correct option is option A.

The scientific method is a combination of mathematical and experimental techniques. It is, more particularly, a method for developing and putting to the test a scientific hypothesis.

No particular branch of science is the only one that engages in the process of observation, questioning, and searching for solutions through tests and experiments. In reality, a wide range of scientific disciplines use the scientific process. A scientist should collect data, then state the question. This describes the correct order for using the scientific method.

Therefore, the correct option is option A.

To know more about scientific method, here:

https://brainly.com/question/7508826

#SPJ1

The initial temperature of the tungsten sample was approximately -68.6 degrees Celsius.

Specific heat capacity is the amount of heat energy required to raise the temperature of one unit of mass of a substance by one degree Celsius.

Specific heat capacity is used in a variety of real-world applications such as designing cooling systems for electronic devices and determining the amount of energy required to heat or cool a building. It is also used in the food industry to calculate cooking times and in the automotive industry to design cooling systems for engines.

The initial temperature of the tungsten sample can be calculated using the formula:

Q = mcΔT

where Q is the amount of heat energy transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

Rearranging the formula, we get:

ΔT = Q / (mc)

Substituting the given values, we get:

ΔT = 5687 J / (50.0 g x 0.134 J/g °C) = 213.6 °C

Since the final temperature of the tungsten is 145.0 °C, we can calculate the initial temperature by subtracting the change in temperature from the final temperature:

Initial temperature = Final temperature - ΔT = 145.0 °C - 213.6 °C = -68.6 °C

Learn more about tungsten here:

https://brainly.com/question/16750038

#SPJ1

The standard potential (E°) for the given reaction is approximately 0.0429 V

To calculate the standard potential, ∘, for this reaction from its δ∘ value, we can use the relationship between the standard Gibbs free energy change, ∆G∘, and the standard potential, ∘, which is:

∆G∘ = -nF∘

where n is the number of moles of electrons transferred in the reaction, and F is the Faraday constant (96,485 C/mol).

In this reaction, x(s) is oxidized to x3+(aq) by losing 3 moles of electrons, while y3+(aq) is reduced to y(s) by gaining 3 moles of electrons. Therefore, n = 3.

From the given δ∘ value of -13.0 kJ, we can calculate the corresponding ∆G∘ value using the relationship:

∆G∘ = -nFE∘

where E∘ is the standard cell potential, which is equal to ∘ for the reaction in question.

First, we need to convert the given δ∘ value from kJ to J:

δ∘ = -13000 J

Then, we can use the equation above to calculate ∆G∘:

∆G∘ = -3 × 96485 C/mol × ∘

-13000 J = -3 × 96485 C/mol × ∘

Solving for ∘, we get:

∘ = 0.0429 V

Therefore, the standard potential, ∘, for this reaction is 0.0429 V.

More on standard potential: https://brainly.com/question/28167340

#SPJ11