Using the terms: polar and nonpolar, explain why oil and water are immiscible.

Answers

Answer 1

An oil molecule has a non-polar structure. Instead of having one positive and one negative end, its charge is evenly balanced.

Why is oil is referred to as a non-polar fluid?

This means that oil molecules are more attracted to other oil molecules than water molecules are to each other, and water molecules are more attracted to each other than oil molecules are to each other, hence the two never combine.

When the molecular liquid is nonpolar, the water molecules simply attract one another, ignoring the nonpolar liquid. As a result, the two liquids are immiscible.

Learn more about polar liquids here:

https://brainly.com/question/23915295

#SPJ1


Related Questions

Would using more sulfuric acid in the Fischer esterification reaction cause the reaction to occur faster? Use the mechanism to explain your answer.
This is part A
Write a detailed mechanism for a) the Fischer esterification of acetic acid with ethanol in the presence of sulfuric acid and b) the reaction of acetyl chloride with ethanol
I only need answer for sulfuric answer part

Answers

In fact, a Fischer esterification reaction would speed up the reaction. By encouraging the production of the electrophilic carbocation intermediate, which is necessary for ester synthesis, sulfuric acid plays a critical role in activating the Fischer esterification reaction.

a) The reason why adding more sulfuric acid speeds up the reaction is explained in greater detail below: In the Fischer esterification reaction, sulfuric acid serves as the acid catalyst as acetic acid combines with ethanol to produce ethyl acetate.

b) Reaction of Acetyl Chloride with Ethanol: Nucleophilic Attack: The lone pair of electrons on the oxygen of ethanol attacks the electrophilic carbon of acetyl chloride  resulting in the formation of a tetrahedral intermediate.

Thus, a Fischer esterification reaction would speed up the reaction.

Learn more about Chloride, refer to the link:

https://brainly.com/question/34962784

#SPJ3

Why does reaction of the metal ions with dilute Naoh limited Oh − Oh − produce the same results as the reaction with dilute aqueous nh3?
Question 1: The reaction of metal ions with dilute NaOH (Itd. OH ) produces the same result as the reaction with dilute aqueous NH3 because they are both Arrhenius bases.

Answers

The reaction of metal ions with dilute NaOH (limited OH-) produces the same result as the reaction with dilute aqueous NH3 because both NaOH and NH3 are Arrhenius bases.

An Arrhenius base is a substance that, when dissolved in water, increases the concentration of hydroxide ions (OH-) in the solution. Both NaOH and NH3 release OH- ions when dissolved in water, which then react with the metal ions to form metal hydroxide precipitates. Since both NaOH and NH3 provide hydroxide ions, they will produce similar results when reacting with metal ions.

Learn more about Arrhenius base here, https://brainly.com/question/27902993

#SPJ11

Draw the substitution products that will be formed from the following SN1 reactions:
A. 3-bromo-3-methylpentane and methanol
B. 3-chloro-3-methylhexane and methanol

Answers

The substitution product of 3-bromo-3-methylpentane and methanol will be 3-methyl-3-pentanol, and The substitution product of 3-chloro-3-methylhexane and methanol will be 3-methyl-3-hexanol.

3-bromo-3-methylpentane and methanol undergo SN1 reaction as follows; Step 1; Ionization of the substrate

3-bromo-3-methylpentane → 3-methyl-3-pentyl cation + Br⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-pentyl cation + CH₃OH → 3-methyl-3-pentanol + H⁺

Therefore, the substitution product is 3-methyl-3-pentanol.

3-chloro-3-methylhexane and methanol undergo SN₁ reaction as follows; Step 1; Ionization of the substrate

3-chloro-3-methylhexane → 3-methyl-3-hexyl cation + Cl⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-hexyl cation + CH₃OH → 3-methyl-3-hexanol + H⁺

Therefore, the substitution product is 3-methyl-3-hexanol.

To know more about substitution product here

https://brainly.com/question/14052597

#SPJ4

in the titration of 25.0 ml of 0.1 m f− (where the solution was made using naf(aq)) with 0.1 m hcl, how is the ph calculated after 30.0 ml of titrant is added?

Answers

The pH of the solution after 30.0 mL of 0.1 M HCl is added is 3.17.

How is the pH calculated after 30.0 mL of 0.1 M HCl is added to 25.0 mL of 0.1 M F- solution in a titration?

To calculate the pH of the solution after 30.0 mL of 0.1 M HCl in the titration of 25.0 ml of 0.1 mL - solution, we need to use the Henderson-Hasselbalch equation.

The Henderson-Hasselbalch equation relates the pH of a solution to the pKa and the ratio of the concentrations of the conjugate acid and base forms of a weak acid or base:

pH = pKa + log([A-]/[HA])

Where:

pH = the pH of the solution

pKa = the dissociation constant of the weak acid or base

[A-] = the concentration of the conjugate base (F-)

[HA] = the concentration of the weak acid (HF)

In this case, F- is the conjugate base of the weak acid HF. The pKa of HF is 3.17.

First, we need to calculate the moles of F- in the solution before any titrant is added:

moles F- = concentration x volume = 0.1 M x 0.025 L = 0.0025 moles

Next, we need to determine the limiting reactant after 30.0 mL of 0.1 M HCl is added. Since the moles of HCl added is:

moles HCl = concentration x volume = 0.1 M x 0.03 L = 0.003 moles

and the initial moles of F- is 0.0025 moles, we see that HCl is in excess and F- is the limiting reactant.

After adding 30.0 mL of HCl, the total volume of the solution is 25.0 mL + 30.0 mL = 0.055 L. The moles of F- remaining after the reaction is:

moles F- = initial moles - moles HCl reacted = 0.0025 moles - 0.003 moles = -0.0005 moles

Since we cannot have a negative concentration, we know that all of the F- has reacted with the HCl, and we are left with a solution containing only HF and its conjugate acid, H2F+.

The moles of HF formed is equal to the moles of HCl added:

moles HF = moles HCl added = 0.003 moles

The concentration of HF in the final solution is:

concentration HF = moles HF / total volume = 0.003 moles / 0.055 L = 0.0545 M

The concentration of F- in the final solution is:

concentration F- = 0 moles / 0.055 L = 0 M

Now we can use the Henderson-Hasselbalch equation to calculate the pH:

pH = pKa + log([A-]/[HA])

pH = 3.17 + log(0/0.0545)

pH = 3.17 - infinity

pH = 3.17 (since the log of 0 is negative infinity)

Therefore, the pH of the solution after 30.0 mL of 0.1 M HCl is added is 3.17.

Learn more about titration

brainly.com/question/31271061

#SPJ11

Given that 4NH3(g)+ 5O2(g) --> 4NO(G) +6H2O(g). If 4.5 miles of NH3 react with sufficent oxygen, how many moles of H2O should form?
A) 4.0
B) 4.5
C) 6.0
D) 6.8

Answers

6.8 moles of H₂O should form when 4.5 moles of ammonia react with sufficient oxygen.

To determine how many moles of H₂O should form in the reaction 4NH₃(g) + 5O₂(g) --> 4NO(g) + 6H₂O(g) when 4.5 moles of NH₃ react with sufficient oxygen, follow these steps:

1. Identify the mole ratio of NH₃ to H₂O in the balanced chemical equation. The mole ratio is 4:6 or 2:3.
2. Apply the mole ratio to the given moles of NH₃. In this case, you have 4.5 moles of NH₃. To find the moles of H₂O formed, multiply the moles of NH₃ by the mole ratio of H₂O to NH₃ (3/2):

4.5 moles NH₃×  (3 moles H₂O / 2 moles NH₃) = 6.75 moles H2O

The correct answer is  D) 6.8 moles of H₂O should form when 4.5 moles of ammonia react with sufficient oxygen.

To learn more about moles https://brainly.com/question/15356425

#SPJ11

Lactic Acid has a pKa of 3.08. What is the approximate degree of dissociation of a .35 M solution of lactic acid?

Answers

The degree of dissociation of the lactic acid solution is approximately 0.0000857.

Given that the pKa of lactic acid is 3.08, the approximate degree of dissociation of a .35 M solution of lactic acid can be calculated. The degree of dissociation of an acid is calculated by using the Henderson-Hasselbalch equation, which states that pH = pKa + log([A-]/[HA]).

In this equation, [A-] is the concentration of the conjugate base and [HA] is the concentration of the acid. To calculate the degree of dissociation, the concentration of the conjugate base needs to be known. By rearranging the equation to [A-] = [HA]*10^(pH-pKa) and substituting the given values for the pH and pKa, the concentration of the conjugate base can be calculated.

The concentration of the conjugate base is .35*10^(-3.08) = .0003 M. The degree of dissociation is then calculated as the ratio of the conjugate base concentration to the original acid concentration, which is .0003/.35 = .0000857.

know more about lactic acid here

https://brainly.com/question/10948414#

#SPJ11

What hazard does the symbol containing the hand represent?
chemical hazard
heat hazard
biohazard
radioactive hazard​

Answers

Answer:

chemical hazard

Explanation:

the “Hazardous Chemical Warning” symbol

calculate the wavelength of an electron traveling at 1.35×107 1.35 × 10 7 m/s m / s .

Answers

The wavelength of an electron traveling at 1.35 × [tex]10^7[/tex] m/s is approximately 5.39 × [tex]10^{-11[/tex] meters.

To calculate the wavelength of an electron traveling at 1.35 × [tex]10^7[/tex] m/s, you can use the de Broglie equation, which relates the wavelength (λ) to the momentum (p) of a particle:
λ = h / p
where h is Planck's constant (6.626 × [tex]10^{-34[/tex] Js) and
p is the momentum of the electron.

The momentum can be calculated using the equation:
p = m × v
where m is the mass of the electron (9.11 × [tex]10^{-31[/tex] kg) and
v is its velocity (1.35 × [tex]10^7[/tex] m/s).

Step 1: Calculate the momentum:
p = (9.11 × [tex]10^{-31[/tex]kg) × (1.35 × [tex]10^7[/tex] m/s)
p ≈ 1.229 × [tex]10^{-23[/tex] kg m/s

Step 2: Use the de Broglie equation to find the wavelength:
λ = (6.626 × [tex]10^{-34[/tex] Js) / (1.229 × [tex]10^{-23[/tex] kg m/s)
λ ≈ 5.39 × [tex]10^{-11[/tex] m

To know more about "de Broglie equation" refer here:

https://brainly.com/question/30404168#

#SPJ11

The H NMR spectra of formic acid HCO2H, maleic acid cis - HO2CCH = CHCO2H and malonic acid HO2CCH2CO2H are similar in that each is characterized by two singlets of equal intensity. Match these compounds with the designations A, B and C on the basis of the appropriate H NMR chemical shift data. Compound A: signals at δ 3.2 and δ12.4Compound B: signals at δ 6.3 and δ12.4Compound C: signals at δ 8.0 and δ11.4

Answers

Based on the given H NMR chemical shift data, we can match the compounds as follows:
Compound A (δ 3.2 and δ 12.4) corresponds to malonic acid (HO2CCH2CO2H), as the two singlets result from the two chemically equivalent methylene (CH2) protons and the two carboxylic acid (CO2H) protons.

Compound B (δ 6.3 and δ 12.4) corresponds to maleic acid (cis-HO2CCH=CHCO2H). The signal at δ 6.3 is due to the two equivalent vinylic protons (CH=CH), while the signal at δ 12.4 results from the two carboxylic acid (CO2H) protons.

Compound C (δ 8.0 and δ 11.4) corresponds to formic acid (HCO2H). The signal at δ 8.0 arises from the single aldehyde proton (CH), and the signal at δ 11.4 is attributed to the carboxylic acid (CO2H) proton.

To know more about chemical shift click here:

https://brainly.com/question/30579222

#SPJ11

what critical risk and success factors must starbucks manage?

Answers

As a business, Starbucks must manage several critical risks to ensure its success. One critical risk is the potential for increased competition from other coffee shops and cafes, which could impact its market share and profitability. Additionally, Starbucks must manage the supply chain and operational risks, such as disruptions in the coffee bean supply or issues with its payment systems.

To maintain its success, Starbucks must also manage several key success factors. One important factor is its ability to maintain and grow its customer base, through marketing campaigns and delivering a high-quality customer experience. Additionally, Starbucks must continually innovate and introduce new products and services to stay relevant and meet evolving customer needs. Effective management of these critical risks and success factors is essential for Starbucks to maintain its position as a leader in the coffee industry.

Learn more about Starbucks at  brainly.com/question/11540013

#SPJ11

draw the structure of the major organic product you would expect from the reaction of 1-bromopropane with koc(ch3)3.

Answers

The major organic product formed from the reaction of 1-bromopropane with KOCH(CH3)3 is 1-propoxypropane.

The reaction involves a substitution reaction where the bromine atom of 1-bromopropane is replaced by the alkoxide group (OC(CH3)3) from potassium tert-butoxide (KOCH(CH3)3). The tert-butoxide ion is a strong nucleophile, attacking the electrophilic carbon of 1-bromopropane to form a new carbon-oxygen bond.

This results in the formation of 1-propoxypropane as the major product, where the tert-butoxide group replaces the bromine atom. The reaction occurs via an S_N2 mechanism, where the nucleophile attacks the substrate from the backside, resulting in inversion of configuration at the reaction center.

For more questions like Reaction click the link below:

https://brainly.com/question/28984750

#SPJ11

For the balanced equation shown below, if the reaction of 3.561 grams of H2 produces 32.12 grams of iron metal in the lab, what is the percent yield?

Answers

the values we have, we get:percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%

How to solve the problem?

The first step in determining the percent yield is to calculate the theoretical yield, which is the maximum amount of product that could be produced based on the amount of reactant used in the reaction. To calculate the theoretical yield, we need to use the balanced chemical equation and the molar mass of the reactant and product.

The balanced chemical equation for the reaction is:

Fe₂O₃ + 3H₂→ 2Fe + 3H₂O

From the equation, we can see that 3 moles of hydrogen gas react with 1 mole of iron oxide to produce 2 moles of iron and 3 moles of water. The molar mass of H₂ is 2.016 g/mol, and the molar mass of Fe is 55.845 g/mol.

Using this information, we can calculate the theoretical yield of iron as follows:

3.561 g H₂ × (1 mol H₂/2.016 g) × (2 mol Fe/3 mol H2) × (55.845 g Fe/mol Fe) = 31.45 g Fe

This means that if the reaction went to completion, we would expect to obtain 31.45 grams of iron.

The actual yield obtained in the lab was 32.12 grams of iron. The percent yield can be calculated using the following formula:

percent yield = (actual yield/theoretical yield) × 100%

Substituting the values we have, we get:

percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%

The percent yield is greater than 100%, which suggests that there may have been some errors or losses during the experiment. This could be due to a number of factors, such as incomplete reaction, loss of product during handling, or measurement errors. It is important to identify and address these sources of error in order to improve the accuracy of the experiment and obtain more reliable results in future trials.

To know more about yield visit :-

https://brainly.com/question/28033398

#SPJ1

What is the best choice of reagent(s) to perform Fisher Esterification? CH31, H2SO4 CH3OH, H2S04 NaOCH CH3L1

Answers

The best choice of reagent(s) to perform Fisher Esterification is [tex]CH_{3}OH[/tex] (methanol) and [tex]H_{2}SO_{4}[/tex] (sulfuric acid).

Fisher Esterification is an organic reaction that involves the conversion of a carboxylic acid and an alcohol to an ester, with a strong acid catalyst, usually sulfuric acid or hydrochloric acid.

In this case, [tex]CH_{3}OH[/tex] serves as the alcohol reactant, which reacts with the carboxylic acid to form the ester. [tex]H_{2}SO_{4}[/tex] acts as the strong acid catalyst, promoting the reaction by protonating the carbonyl oxygen atom of the carboxylic acid.

This makes the carbonyl carbon more electrophilic, allowing the nucleophilic attack by the alcohol's oxygen atom. The reaction then proceeds through a series of steps, including the formation of a tetrahedral intermediate and the loss of a water molecule.

The other reagents mentioned, NaOCH and [tex]CH_{3}L_{1}[/tex], are not suitable for Fisher Esterification. NaOCH is a base, and the reaction requires an acidic catalyst. [tex]CH_{3}L_{1}[/tex] appears to be a typographical error and does not correspond to any known reagent.

In summary, the best choice of reagent(s) to perform Fisher Esterification is [tex]CH_{3}OH[/tex] (methanol) and [tex]H_{2}SO_{4}[/tex] (sulfuric acid), as they provide the necessary alcohol and acidic catalyst for the reaction to proceed efficiently.

To know more about Fisher Esterification, refer here:

https://brainly.com/question/31041190#

#SPJ11

on a gas chromatogram, the time from sample injection to the time of maximum peak intensity is referred to as the ____________ for that peak.

Answers

On a gas chromatogram, the time from sample injection to the time of maximum peak intensity is referred to as the "retention time" for that peak.

Gas chromatography is used to separate compounds of a mixture by injecting a gaseous/liquid sample into a mobile phase known as the carrier gas, which is usually and inert or unreactive gas and passing the gas through a stationary phase.

If we have a sample with many compounds, each compound in the sample will spend different time on the column based on its chemical composition which means that, each will have a different retention time.

For more questions on gas chromatography: https://brainly.com/question/30500847

#SPJ11

Oxidation issues. Examine the pairs of molecules and identify the more-reduced molecule in each pair.
a) ethanol or acetaldehyde
b) lactate or pyruvate
c) succinate or fumarate
d) oxalosuccinate or isocitrate
e) malate or oxaloacetate
f) pyruvate or 2-phosphoglycerate

Answers

The more-reduced molecules in each pair are: a) ethanol, b) lactate, c) succinate, d) isocitrate, e) malate, and f) 2-phosphoglycerate.


a) Ethanol is more reduced than acetaldehyde because it has more hydrogen atoms and fewer oxygen atoms in its structure.


b) Lactate is more reduced than pyruvate because it has one more hydrogen atom and one less double-bonded oxygen atom.


c) Succinate is more reduced than fumarate due to the presence of two additional hydrogen atoms in its structure.


d) Isocitrate is more reduced than oxalosuccinate because it has one more hydrogen atom and one less double-bonded oxygen atom.


e) Malate is more reduced than oxaloacetate because it has two additional hydrogen atoms.


f) 2-phosphoglycerate is more reduced than pyruvate because it has three more hydrogen atoms and one less double-bonded oxygen atom.

To know more about phosphoglycerate click on below link:

https://brainly.com/question/28610998#

#SPJ11

Part 3: pH of acetate and ammonium salts Reagents and glassware: -50mL 0.10M ammonium nitrate (NH4NO3 )- Calculated mass of sodium acetate (CH3COONa or NaC2H3O2 )which may be a trihydrate **this mass will be less than 1 g - Two100 mLbeakers (or convenient volume to measure thepH with a meter) -50 mLgraduated cylinder -100 mLErlenmeyer flask 1.Measure out 50 mL of0.10M ammonium nitrate into a 100 mL beaker (or convenient volume to submerge the bulb of thepH electrode) and complete the first line of Table 7.3. 2. Make 50 mL of (approximately) 0.10M sodium acetate (which may actually be a trihydrate) in a small Erlenmeyer flask according to the procedure that you developed on your pre-lab. Show your calculations for making the solution below. Transfer it to a 50 mL beaker and calculate and measure thepH of the solution and complete the second line of Table 7.3. Calculations for50 mL of 0.100M sodium acetate 0,1804 g Mass of sodium acetate actually used: 0.4810 g Calculated molarity of the solution: 0.05 L 0,10M =0,005MTable 7.3.Calculated and observed pH of aqueous salts

Answers

Table 7.3: Calculated and observed pH of aqueous salts as attached below.

What is acetate?

Acetate is a salt or an ester of acetic acid. It can refer to the acetate ion, which is the conjugate base of acetic acid, or to acetate compounds such as sodium acetate or ethyl acetate. The acetate ion has the chemical formula C2H3O2- and is negatively charged.

To measure the pH of each solution, use a pH meter or pH indicator strips according to the manufacturer's instructions. Dip the pH electrode or strip into the solution, wait for the reading to stabilize, and record the observed pH in the table.

Find out more on acetate here: https://brainly.com/question/30224584

#SPJ1

Write the systemic name of Hg(NO3)2 H20
_________

Answers

Answer:

[tex]The \: systemic \: name \: of \: the \: \\ compound \: is[/tex]

Mercuric nitrate

hope it helps <3

Why is it necessary to test for the ammonium ion in a separate sample of solution? Why can you not simply test for it in Group C, when you are evaporating the solution?

Answers

Testing for ammonium ion in a separate sample is necessary to avoid interference from other ions present in Group C during evaporation.

How testing for ammonium ion in a separate sample is necessary ?

The reason why it is necessary to test for the ammonium ion in a separate sample of solution is that it can interfere with the analysis of other cations in Group C.

During the analysis of Group C cations, the solution is usually evaporated to dryness to remove any excess ammonium chloride, which is added to the solution to ensure the complete precipitation of Group C cations. However, if ammonium ion is present in the solution, it can form volatile ammonia gas upon evaporation and interfere with the analysis of other cations by masking their precipitates or changing their color.

By testing for the ammonium ion in a separate sample of solution, it can be determined whether or not it is present before the evaporation step. If it is present, it can be removed or masked before proceeding with the analysis of Group C cations.

Therefore, it is important to test for the ammonium ion separately to ensure accurate and reliable results in the analysis of Group C cations.

Learn more about ammonium ion

brainly.com/question/29781007

#SPJ11

Convert your experiment solubility of KHT (in mol L^-1) to g KHT per 100 mL. Compare this solubility to the literature value, obtainable from a chemistry handbook

Answers

The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.

What is solubility?

Solubility is the ability of a substance to dissolve in a solvent, usually a liquid, to form a homogeneous solution. It is expressed as the maximum amount of solute that can dissolve in a given quantity of solvent or solution. It can also be expressed in terms of concentration, as the amount of solute that dissolves in a given volume of solvent or solution at a given temperature. A substance is considered soluble if it dissolves in a solvent at a rate sufficient to reach equilibrium.

Given: Solubility of KHT in mol L⁻¹ = 0.00025 mol/L

Conversion: 0.00025 mol/L x 204.22 g/mol = 0.0505 g KHT/100 mL

The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.

To learn more about solubility

https://brainly.com/question/23946616

#SPJ1

The maximum amount of nickel(II) hydroxide that will dissolve in a 0.169 M nickel(II) nitrate solution is _________ M.

Answers

Therefore, the maximum amount of nickel(II) hydroxide that will dissolve in a 0.169 M nickel(II) nitrate solution is 1.5 x [tex]10^{-9[/tex]M.

The maximum amount of nickel(II) hydroxide that will dissolve in a 0.169 M nickel(II) nitrate solution, we need to compare the solubility product (Ksp) of nickel(II) hydroxide with the concentration of nickel(II) ions in the solution. The balanced equation for the dissolution of nickel(II) hydroxide is:

[tex]Ksp = [Ni_2+][OH-]^2[/tex]

The Ksp expression for this reaction is:

 [tex]Ksp = [Ni_2+][OH-]^2[/tex]

The Ksp value for nickel(II) hydroxide at 25°C.

If we assume that all of the nickel(II) ions in the nickel(II) nitrate solution will react with hydroxide ions to form nickel(II) hydroxide, then the concentration of nickel(II) ions in the solution will be equal to the initial concentration of nickel(II) nitrate, which is 0.169 M.

Using the Ksp expression, we can calculate the concentration of hydroxide ions required to reach the maximum amount of nickel(II) hydroxide that can dissolve in the solution:

[tex]Ksp = [Ni_2+][OH-]^2[/tex]

[tex]1.6 x 10^{-16} = (0.169 M)(x)^2[/tex]

x = 1.5 x [tex]10^{-9[/tex]  M

Learn more about solution Visit: brainly.com/question/25326161

#SPJ4

What volume of each of the following solutions contains 0.150mol of the solute?

a) 0.0025M HCl
b) 1.25M ZnSO4

Answers

Each one of the following includes 0.150mol of solute in a 0.0025M HCI volume.

What is a good example of volume through real life?

The space that an item takes up. It is normally assessed in cubic units and estimated and use a variation of formulas. A hexagonal bathtub that also is 1 foot tall, two feet wide, & 4 feet long, for example, has a quantity of 8 cubic meters.

What's the most precise method for measuring volume?

Volumetric flasks, burettes, or pipettes designed for measuring amounts of liquid tend to be the most accurate, of tolerances of less than 0.02. Precision measurements are required in research and testing, and many testing vessels are already designed to login for liquid residue which clings in a flask.

To know more about volume visit :

https://brainly.com/question/24189159

#SPJ1

what is the density (in g/lg/l ) of hydrogen gas at 21 ∘c∘c and a pressure of 1640 psipsi ?

Answers

The density of hydrogen gas at 21°C and 1640 psi is approximately 0.090 g/L.

The ideal gas law can be used to calculate the density of a gas, given its pressure, temperature, and molar mass. Using the ideal gas law and the molar mass of hydrogen, which is 2.016 g/mol, the density of hydrogen gas at 21°C and 1640 psi can be calculated as follows:

[tex]PV = nRT[/tex]

[tex]n = PV/RT[/tex]

[tex]n = (1640 psi) (1 L/14.7 psi) / [(0.08206 L atm/mol K) (294 K)]n = 0.103 mol[/tex]

density = (n x molar mass) / volume

density = (0.103 mol) (2.016 g/mol) / (1 L)

density = 0.090 g/L

learn more about density here:

https://brainly.com/question/29775886

#SPJ11

Determine the mass of solid NaCH₃COO that must be dissolved in an existing 500.0 mL solution of 0.200 M CH₃COOH to form a buffer with a pH equal to 5.00. The value of Ka for CH₃COOH is 1.8 × 10⁻⁵. 
Find the ICE chart for CH3COOH(aq) + H2O - H3O+ + CH3COO-(aq)
And Solve for Ka= ? =1.8*10-5

Answers

To form a buffer with a pH of 5.00, you need to dissolve approximately 1.19 g of solid NaCH₃COO in the 500.0 mL solution of 0.200 M CH₃COOH.

To determine the mass of solid NaCH₃COO, you'll first need to calculate the moles of CH₃COO⁻ needed using the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

Step 1: Calculate pKa
pKa = -log(Ka) = -log(1.8 × 10⁻⁵) ≈ 4.74

Step 2: Plug in pH, pKa, and [HA]
5.00 = 4.74 + log([CH₃COO⁻]/[0.200 M])

Step 3: Solve for [A⁻]
[CH₃COO⁻] = 0.200 M × 10^(5.00 - 4.74) ≈ 0.229 M

Step 4: Calculate moles of CH₃COO⁻ needed
Moles of CH₃COO⁻ = (0.229 M - 0.200 M) × 0.500 L = 0.0145 mol

Step 5: Determine mass of NaCH₃COO
Mass = 0.0145 mol × 82 g/mol (molar mass of NaCH₃COO) ≈ 1.19 g

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

18.how would each of the following changes affect the equilibrium position
Please help me please both 18 and19

Answers

Adding HCl would favor the products
Cooling the system would favor the products
Decreasing the volume would favor the products (less moles of gas)
Decreasing pressure would favor the reactants (more moles of gas)

when ethyl benzoate is heated in methanol containing a small amount of hcl, methyl benzoate is formed. draw structural formulas for the first two intermediates in this reaction

Answers

The first intermediate in the reaction is the protonation of ethyl benzoate by the HCl to form the ethyl benzoate cation. This can be represented as:

 CH3CH2OCOPh + H+ -> CH3CH2OCOPh2+

The second intermediate is the nucleophilic attack of the methanol on the ethyl benzoate cation, leading to the formation of a tetrahedral intermediate. This can be represented as:

CH3CH2OCOPh2+ + CH3OH -> CH3CH2OCOCH3 + H2O

Overall, the reaction can be represented as:

CH3CH2OCOPh + CH3OH + HCl -> CH3CH2OCOCH3 + H2O + Cl-

Learn more about nucleophilic attack here:

https://brainly.com/question/28325919

#SPJ11

Consider the following reaction, 2A(g) = B(g) + 3C(8) Initial concentration of A was 0.115 M and the equilibrium concentration of B(g) was 0.035 M. Determine the equilibrium constant for this reaction. 50 0.020 0.300 3.3 0.010

Answers

This reaction's equilibrium constant is 0.300.

To solve for the equilibrium constant (Kc), we need to use the concentrations of the reactants and products at equilibrium. We are given the equilibrium concentration of B(g) which is 0.035 M. However, we need to find the equilibrium concentrations of A(g) and C(g).

From the balanced chemical equation, we know that for every 2 moles of A that react, 1 mole of B and 3 moles of C are produced. Let x be the equilibrium concentration of A. Then, using stoichiometry, the equilibrium concentrations of B and C are:

[B] = 0.035 M
[C] = 3x

Since the reaction stoichiometry is 2:1:3 (A:B:C), the equilibrium concentrations in terms of x are:

[A] = 0.115 - 2x
[B] = 0.035
[C] = 3x

Now we can write the expression for the equilibrium constant (Kc):

Kc = ([B]^1[C]^3) / [A]^2

Plugging in the equilibrium concentrations, we get:

Kc = (0.035)(3x)^3 / (0.115 - 2x)^2

Simplifying this expression, we get:

Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

At equilibrium, the reaction quotient Qc is equal to Kc. Therefore, we can set up an equation to solve for x:

Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

Kc = 3.3 (given)

3.3 = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

Solving this equation for x gives us x = 0.020 M. Therefore, the equilibrium concentrations are:

[A] = 0.115 - 2x = 0.075 M
[B] = 0.035 M
[C] = 3x = 0.060 M

Plugging in these values into the expression for Kc gives us:

Kc = (0.035)(0.060)^3 / (0.075)^2

Kc = 0.300

Therefore, the equilibrium constant for this reaction is 0.300.

For more such questions on equilibrium constant , click on:

https://brainly.com/question/3159758

#SPJ11

the ocean's deep sound channel (sofar layer) is characterized as a zone in which

Answers

The ocean's deep sound channel is characterized as a zone in which sound waves are able to propagate for long distances with minimal attenuation

It is  due to the unique properties of the water at that depth. The SOFAR layer is located at depths between 800 and 1200 meters, where the water temperature and pressure create a stable environment that allows sound waves to travel with little interference.

This layer acts as a barrier that traps and channels sound waves, allowing them to travel great distances without significant loss of energy. The unique acoustic properties of the SOFAR layer have important implications for oceanography, as it allows for the detection of distant underwater events such as earthquakes, volcanic eruptions, and the movements of marine mammals.

To know more about sofar layer click on below link :

https://brainly.com/question/1177283

#SPJ11

If 20g of caco2 and 25g of Hcl are mixed ,what mass of Co2 is produced ?

Answers

Approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.

The balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is:

CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O

From the equation, we can see that 1 mole of CaCO₃ reacts with 2 moles of HCl to produce 1 mole of CO₂. The molar mass of CaCO₃ is 100.09 g/mol, and the molar mass of HCl is 36.46 g/mol.

To find the mass of CO₂ produced, we need to determine which reactant is limiting. This can be done by calculating the number of moles of each reactant and comparing them to the stoichiometric ratio in the balanced equation.

Number of moles of CaCO₃ = 20 g / 100.09 g/mol = 0.1998 mol

Number of moles of HCl = 25 g / 36.46 g/mol = 0.685 mol

According to the balanced equation, 1 mole of CaCO₃ reacts with 2 moles of HCl. Therefore, the limiting reactant is CaCO₃, since only 0.1998 moles of CaCO₃ are available to react with HCl.

From the balanced equation, we know that 1 mole of CaCO₃ produces 1 mole of CO₂. Therefore, the number of moles of CO₂ produced is also 0.1998 mol.

The molar mass of CO₂ is 44.01 g/mol. Therefore, the mass of CO₂ produced is:

Mass of CO= 0.1998 mol x 44.01 g/mol = 8.79 g

Therefore, approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.

Learn more about molar mass,

https://brainly.com/question/22997914

#SPJ4

3. What preliminary test results are you looking for to identify conclusively your unknown solutions as Set B? Explain.
Set B: AgNO3(aq), Ba(NO3)2(aq), HCl(aq), H2SO4(aq), NaOH(aq)

Answers

To identify conclusively your unknown solutions as Set B, the following preliminary test results can be looked for:  

By adding HCl to test the presence of Ag ions, [tex]H_{2} SO_{4}[/tex] for ([tex]Ba^{2+}[/tex] ions, [tex]AgNO_{3}[/tex] for Cl- ions, [tex](BaNO_{3})_{2}[/tex] for [tex]SO_{4} ^{2-}[/tex] ions and HCl for OH- ions.

What preliminary tests should we do to test the presence of ions?


To conclusively identify your unknown solutions as Set B, you should look for the following preliminary test results:

1. Test for the presence of silver ions (Ag+) in [tex]AgNO_{3}[/tex](aq): Add a few drops of HCl(aq) to the unknown solution. If a white precipitate of AgCl forms, it is an indication of [tex]AgNO_{3}[/tex](aq).

2. Test for the presence of barium ions ([tex]Ba^{2+}[/tex]) in [tex](BaNO_{3})_{2}[/tex](aq): Add a few drops of  [tex]H_{2} SO_{4}[/tex](aq) to the unknown solution. If a white precipitate of  [tex]BaSO_{4}[/tex] forms, it is an indication of [tex](BaNO_{3})_{2}[/tex](aq).

3. Test for the presence of chloride ions (Cl-) in HCl(aq): Add a few drops of [tex]AgNO_{3}[/tex](aq) to the unknown solution. If a white precipitate of AgCl forms, it is an indication of HCl(aq).

4. Test for the presence of sulfate ions ([tex]SO_{4} ^{2-}[/tex]) in  [tex]H_{2} SO_{4}[/tex](aq): Add a few drops of Ba(NO3)2(aq) to the unknown solution. If a white precipitate of  [tex]BaSO_{4}[/tex](aq) forms, it is an indication of [tex]H_{2} SO_{4}[/tex](aq).

5. Test for the presence of hydroxide ions (OH-) in NaOH(aq): Add a few drops of HCl(aq) or  [tex]H_{2} SO_{4}[/tex](aq) to the unknown solution. If the solution fizzes, giving off gas, and neutralizes the acid, it is an indication of NaOH(aq).

To know more about Preliminary Tests of Ions:

https://brainly.com/question/12601152

#SPJ11

Consider the following balanced redox reaction.
2S2O32- + I2 → 2I- + S4O62-
How many electrons are being transferred in this reaction?
a. 3
b. 1
c. 2
d. 4

Answers

The number of electrons being transferred in the reaction is (c) 2.

The balanced redox reaction given is:

2S₂O₃²⁻ + I₂ → 2I⁻ + S₄O₆²⁻

To determine the number of electrons being transferred, we need to identify the changes in oxidation states of the elements involved in the reaction. In this reaction, iodine (I) and sulfur (S) are the elements undergoing redox changes.

Initially, I₂ has an oxidation state of 0 (elemental form). In the product, I⁻, its oxidation state changes to -1. Since there are two iodine atoms in I₂, each gaining one electron, a total of 2 electrons are gained by iodine.

Sulfur, on the other hand, starts with an oxidation state of +2 in S₂O₃²⁻ and changes to +2.5 in S₄O₆²⁻. As there are four sulfur atoms in 2S₂O₃²⁻ and four sulfur atoms in S₄O₆²⁻, the overall change in the oxidation state of sulfur is (4 x +2.5) - (4 x +2) = 2.

The change in oxidation state of sulfur indicates that it loses 2 electrons, which are subsequently gained by iodine. Therefore, the total number of electrons being transferred in this reaction is 2 (option c).

Learn more about redox reaction here: https://brainly.com/question/459488

#SPJ11

Other Questions
how would using multiple hard copies of each transaction affect abc's recovery point objective (rpo)? Make a rap about why a parallelogram is the best shape. Must be appropriate and at least a minute long. Giving brainless to whoever answers!!! be sure to answer all parts. rank the species in order of increasing nucleophilicity in acetone. a. ch3sh b. ch3oh c. ch3nh2 Select all the correct answers.Which two items are considered appropriate business attire for an interview?A.bold and flashy accessoriesB.neutral and subdued suitC.casual, uncombed, and unruly hairD.bright and colorful shoesE.minimal fragrance and cosmetics can the highway system accommodate a northsouth flow of 7,000 vehicles per hour? no maximum flow of vehicles per hour = fill in the blank 50 Beginning of covid-19 What is the volume of 4.56 moles of gas at 0.634 atm and 75 C?Show your work A substance that causes the oxidation of another substance is called an oxidizing agent. a. trueb. false A concentrated sucrose solution is poured into a cylinder of diameter 5.0 cm. The solution consisted of 10 g of sugar in 5.0 cm3 of water. A further 1.0 L of water is then poured very carefully on top of the layer, without disturbing the layer. Ignore gravitational effects, and pay attention only to diffusional processes. Find the concentration at 5.0 cm above the lower layer after a laps of the following timea. 24 s __ Mb. 2.4 y ___ M What are the responsibilities of an intern? an ordinary annuity makes quarterly payments of $1,000. the annuity earns a 12 nnual return with quarterly compounding. the future value of this annuity after 10 quarters is explain the different methods of formation of office a* algorithm is based on (a) breadth-first-search (b) depth-first search Find the Taylor polynomial T3(x) for the function f centered at the number a. f(x) = xe?5x, a = 0Find the Taylor polynomial Find the Taylor polynomial T(x) for the function fcentered at the number a. (x) for the function fcentered at the number a. rsum sur renart et tibert le chat Blood at temperature 37C enters the left ventricle od a skier at a rate of 100ml/s. At time t=0, the skier steps outside and begins to breathe in very cold ait. Consequently, the temperature of the blood entering the ventricle is suddenly reduced to 34C. Assume the ventricle has a constant volume of 100 ml, is well mixed, and the specific heats and densities of blood are independent of temperature.a) Derive an algebraic expression for the temperature of blood exiting from the ventricle as a function of time.b) What will be the temperature of blood emerging from the ventricle after a long period of time? when faced with uncertain conditions, it is always best to sign long-term contracts (because they are typically cheaper) and avoid all flexible capacity (because it is more expensive) t/f write an essay on the topic 'how to prepare myfavorite food'.will MARK as BRAINLIEST( favorite food: chicken and chips)100pts As we have seen in class, hypothesis testing and confidence intervals are the most common inferential tools used in statistics. Imagine that you have been tasked with designing an experiment to determine reliably if a patient should be diagnosed with diabetes based on their blood test results. Create a short outline of your experiment, including all of the following: A detailed discussion of your experimental design. How is randomization used in your sampling or assignment strategy? The type of inferential test utilized in your experiment. A formal statement of the null and alternative hypothesis for your test. A confidence interval for estimating the parameter in your test. An interpretation of your p-value and confidence interval, including what they mean in context of your experimental design In the laboratory, you are given the task of separating Ca2+ and Zn2+ ions in aqueous solution. Can the reagent Na2S be used for this process? If so, write the formula of the precipitate.