be sure to answer all parts. rank the species in order of increasing nucleophilicity in acetone. a. ch3sh b. ch3oh c. ch3nh2

The initial phase is solid and the final phase is gas, which makes the overall transition solid to gas.

The initial phase of the sample is solid, since H2O at -10 ˚C and 1 atm is in its solid state (ice). When the kinetic energy of the molecules is doubled, the molecules start to move faster and gain more energy. As a result, the intermolecular forces that were holding the solid together become weaker, and the molecules start to break apart from their fixed positions. This causes the ice to melt and transition to the liquid phase. However, if the kinetic energy of the molecules continues to increase, the molecules will eventually have enough energy to break free from the liquid and become a gas. So the final phase of the sample would be gas.  

To know more about initial phase please refer: https://brainly.com/question/29978029

#SPJ11

The C-C-C bond angles in the tert-butyl carbocation, (CH₃)₃C⁺. The correct answer is D. 150°.

The tert-butyl carbocation, also known as (CH₃)₃C⁺, is a positively charged carbon cation with three methyl (CH₃) groups attached to the central carbon atom. Due to the positive charge on the central carbon, the carbocation adopts a trigonal planar geometry with a bond angle of 120° between the three methyl groups.

Since the (CH₃)₃C⁺ carbocation has a linear arrangement of three methyl groups, the bond angles between the C-C-C bonds are all 180°. However, in the case of tert-butyl carbocation, one of the methyl groups is slightly displaced from the linear arrangement due to steric repulsion between the bulky methyl groups.

This results in a deviation from the ideal linear geometry, with the C-C-C bond angles being approximately 150°. Therefore, the correct answer is D. 150°.

You can learn more about bond angles at: brainly.com/question/14089750

#SPJ11

converting 11.0 g of copper metal results in 1.042 x 10^23 copper atoms being loaded with content.

To convert 11.0 g of copper metal to the equivalent number of copper atoms, we need to use the concept of molar mass and Avogadro's number.

The molar mass of copper is 63.55 g/mol. Therefore, 11.0 g of copper metal is equivalent to 11.0/63.55 = 0.1731 mol of copper.

Next, we need to find the equivalent number of copper atoms in 0.1731 mol of copper. This can be done by multiplying the Avogadro's number (6.022 x 10^23 atoms/mol) with the number of moles of copper.

So, the equivalent number of copper atoms in 11.0 g of copper metal is:

0.1731 mol x 6.022 x 10^23 atoms/mol = 1.042 x 10^23 copper atoms.

Therefore, converting 11.0 g of copper metal results in 1.042 x 10^23 copper atoms being loaded with content.

To know more about copper metal click here:

https://brainly.com/question/19544485

#SPJ11

The correct answer is (a) A precipitate will form because of P > Ksp.

The ion product (IP) is calculated by multiplying the concentrations of the ions involved in the precipitation reaction, raised to the power of their respective stoichiometric coefficients. For the reaction: AgCl(s) ↔ Ag+(aq) + Cl-(aq) , Ionic product can be determined by:

Step 1: Determine the concentrations of the ions after mixing.
[Cl-] = (1.5×10−3 M)(250 mL) / (250 mL + 250 mL) = 7.5×10−4 M
[Ag+] = (2.0×10−7 M)(250 mL) / (250 mL + 250 mL) = 1.0×10−7 M

Step 2: Calculate the reaction quotient (Q) using the ion concentrations.
Q = [Ag+][Cl-] = (1.0×10−7 M)(7.5×10−4 M) = 7.5×10−11

Step 3: Compare Q to Ksp.
If IP > Ksp, a precipitate will form because the ion product exceeds the solubility product, indicating that the solution is supersaturated and the excess ions will form a solid precipitate.

If IP = Ksp, the solution is saturated and at equilibrium, and no precipitate will form.

If IP < Ksp, the solution is unsaturated and no precipitate will form.

Since Q > Ksp (7.5×10−11 > 1.8×10−10), a precipitate will form because P > Ksp.

To know more about Ionic Product:

https://brainly.com/question/31326174

#SPJ11

A normal shock occurs in the diverging section of a converging-diverging nozzle where the area (a) is 4.0 in² and the mass flow rate (m) is 2.50.

In a converging-diverging nozzle, the flow accelerates through the converging section, reaching supersonic speeds. As the flow enters the diverging section, a normal shock wave forms due to the sudden increase in pressure and decrease in velocity. This phenomenon causes the flow to decelerate back to subsonic speeds.

To analyze this situation, we can apply the conservation of mass and momentum principles. The mass flow rate (m) can be expressed as m = ρAv, where ρ is the density, A is the area, and v is the velocity. Using the given values, we can calculate the flow properties upstream and downstream of the shock wave.

Then, we can apply the normal shock relations, such as the Rankine-Hugoniot equations, to determine the changes in pressure, temperature, and Mach number across the shock.

By understanding these changes, we can better comprehend the flow behavior in the diverging section of a converging-diverging nozzle.

To know more about mass flow rate click on below link:

https://brainly.com/question/30763861#

#SPJ11

There are 1.39 * 10^{-4} moles of HCl in 13.9 mL of the stomach acid sample.

To solve this problem, we need to use the formula:
moles = concentration (in mol/L) x volume (in L)
First, we need to convert the volume of stomach acid from milliliters to liters:
13.9 mL = 0.0139 L
Next, we need to find the concentration of HCl in the stomach acid using the pH. We can use the fact that pH = -log[H+], where [H+] is the concentration of hydrogen ions (protons) in the solution. Since HCl is a strong acid that completely dissociates in water, the concentration of H+ is equal to the concentration of HCl.
pH = -log[H+]
pH = -log[HCl]
[HCl] = 10^-pH
For gastric acid with a pH range of 1 to 4, the concentration of HCl can range from 0.1 M to 0.0001 M (or 100 mM to 0.1 mM). Let's assume a concentration of 0.01 M (or 10 mM) for this problem.
Now we can plug in the values into the formula:
moles = concentration x volume
moles = 0.01 mol/L x 0.0139 L
moles = 1.39 x 10^{-4} moles

learn more about stomach acid Refer: https://brainly.com/question/16873455

#SPJ11

When solid calcium chloride (CaCl₂) is put into water, it dissolves and dissociates into its ions, forming a strong electrolyte solution. The reaction can be written as CaCl₂(s) → Ca²⁺ (aq) + 2Cl⁻(aq). In this reaction, "s" denotes the solid state of calcium chloride, "aq" indicates the aqueous state of the ions in the solution, and the superscripts ²⁺ and ⁻ represent the charges of the calcium and chloride ions, respectively.

A strong electrolyte solution is a solution that contains a high concentration of ions and conducts electricity very efficiently. Strong electrolytes are substances that completely dissociate into ions when dissolved in a solvent, such as water. Strong electrolytes can be further classified as strong acids, strong bases, or salts.

Learn more about strong electrolytes: https://brainly.com/question/2285692

#SPJ11

69.15 grams of NH3 can be made from 6.09 mol of H2 and excess N2. The term "excess" means that there is more than enough N2 present to react with all of the H2, so the amount of NH3 produced is limited by the amount of H2 rather than the amount of N2.

To calculate the grams of NH3 that can be made from 6.09 mol of H2 and excess N2, you can use the balanced chemical equation and molar masses. The balanced chemical equation for the synthesis of NH3 is:
N2 + 3H2 → 2NH3
From the balanced equation, you can see that 3 moles of H2 are required to produce 2 moles of NH3. Given that you have 6.09 moles of H2, you can determine the moles of NH3 produced using the mole ratio:
(6.09 mol H2) x (2 mol NH3 / 3 mol H2) = 4.06 mol NH3
Now you can convert moles of NH3 to grams using its molar mass (17.03 g/mol):
(4.06 mol NH3) x (17.03 g/mol) = 69.1 g NH3
So, 69.1 grams of NH3 can be made from 6.09 mol of H2 and excess N2.

To answer this question, we need to use the balanced chemical equation for the reaction between H2 and N2 to form NH3:
3H2 + N2 → 2NH3
From the equation, we can see that for every 3 moles of H2 used, 2 moles of NH3 are produced. Therefore, we can use a proportion to find the number of moles of NH3 produced from 6.09 mol of H2:
(2 mol NH3 / 3 mol H2) x 6.09 mol H2 = 4.06 mol NH3
Now, we need to convert moles of NH3 to grams. We can do this by using the molar mass of NH3:
1 mol NH3 = 17.03 g NH3
4.06 mol NH3 x 17.03 g NH3/mol NH3 = 69.15 g NH3
Therefore, 69.15 grams of NH3 can be made from 6.09 mol of H2 and excess N2.

Learn more about moles here: brainly.com/question/26416088

#SPJ11

(a) CaCO₃(s) + 2HCl(aq) → CaCl₂(aq) + CO₂(g) + H₂O(l).

(b) 0.45 g of CO₂(g) is theoretically possible.

(c) CaCO₃ is limiting and HCl is in excess.

(d) 0.56 g of HCl will react with the limiting reactant.

(a) The balanced chemical equation for the reaction between solid calcium carbonate and aqueous hydrochloric acid is:

CaCO₃(s) + 2 HCl(aq) → CaCl₂(aq) + CO₂(g) + H₂O(l)

(b) To calculate the theoretical yield of the gaseous product, we need to determine which reactant is limiting. Using the molar masses of CaCO₃ (100.09 g/mol) and HCl (36.46 g/mol), we can calculate the number of moles of each:

n(CaCO₃) = 1.25 g / 100.09 g/mol = 0.0125 mol

n(HCl) = 1.01 g / 36.46 g/mol / 2 = 0.0138 mol (divided by 2 because there are 2 moles of HCl per reaction)

From the balanced equation, we see that 1 mole of CaCO₃ reacts with 2 moles of HCl to produce 1 mole of CO₂. Therefore, the limiting reactant is CaCO₃, as it will run out first. The theoretical yield of CO₂ can be calculated as follows:

n(CO₂) = 0.0125 mol CaCO₃ × (1 mol CO2 / 1 mol CaCO₃) = 0.0125 mol CO₂

m(CO₂) = n(CO₂) × MM(CO₂) = 0.0125 mol × 44.01 g/mol = 0.550 g CO2

Therefore, the theoretical yield of CO₂ is 0.550 g.

(c) The reactant that is limiting is CaCO₃, and the reactant that is in excess is HCl.

(d) To calculate how many grams of the excess reactant will react with the limiting reactant, we can use stoichiometry. From the balanced equation, we see that 1 mole of CaCO₃ reacts with 2 moles of HCl. Therefore, the number of moles of HCl that will react with the available CaCO₃ is:

n(HCl) = 0.0125 mol CaCO₃ × (2 mol HCl / 1 mol CaCO₃) = 0.0250 mol HCl

The number of moles of HCl that is in excess is:

n(HCl)excess = 0.0138 mol - 0.0250 mol = -0.0112 mol

This negative value indicates that there is no excess HCl remaining after the reaction has gone to completion. Therefore, the amount of excess reactant that will react with the limiting reactant is zero.

Learn more about Balanced chemical equation

brainly.com/question/28294176

#SPJ11

A lossless transmission line having 50 Ω characteristic impedance and length λ/4 is short circuited at one end and connected to an ideal voltage source of 1 V at the other end. The current drawn from the voltage sources is 0.02 A

Hence, the correct answer is B, 0.02 A.

This is because when a lossless transmission line is short circuited at one end and connected to an ideal voltage source at the other end, a standing wave is created. At a length of λ/4, the impedance at the end of the line will be purely reactive and equal to the characteristic impedance of the line (in this case, 50 Ω).

Since the line is lossless, there will be no power dissipation, and the voltage and current at any point on the line will be related by the characteristic impedance. Therefore, the current drawn from the voltage source will be:

I = V/Z = 1/50 = 0.02 A

So, the correct answer is B, 0.02 A.

To learn more about impedance https://brainly.com/question/31369031?cb=1681367133539

#SPJ11

a. The entropy of ruby is higher than that of pure alumina.

b,c) Solid  [tex]CO_2[/tex] at -78°C has a lower entropy than  [tex]CO_2[/tex](g) at 0°C.

d). The entropy of one mole of  [tex]N_2[/tex](g) at 1 atm pressure is larger than that of one mole at 10 atm pressure.

The substitution of Cr ions in the crystalline lattice enhances disorder and randomness in the structure, resulting in a higher entropy, which is why ruby has a higher entropy than pure alumina.

b. Because gas molecules have greater freedom to move about and more potential configurations, they have a larger entropy than solid [tex]CO_2[/tex]molecules do at -78°C.

c. Liquid water at 50 °C has a larger entropy than liquid water at 25 °C because the disorder and unpredictability of the water molecules increase at higher temperatures, which increases entropy.

d. A mole of [tex]N_2[/tex](g) at 1 atm pressure has a higher entropy than a mole of  [tex]N_2[/tex](g) at 10 atm pressure because molecules have more room to move around at lower pressure, which results in more potential configurations and a higher entropy.

To learn more about entropy brainly.com/question/419265

#SPJ4

To rank the compounds in the order of increasing reactivity towards nucleophilic attack, we can consider factors such as steric hindrance, electron-withdrawing groups, and resonance effects.

The compounds are:

1. Chloromethane
2. Chloroethane
3. Chloropropane

The ranking for increasing reactivity towards nucleophilic attack is:

1. Chloromethane (least reactive)
2. Chloroethane
3. Chloropropane

(most  based on the fact that the reactivity towards nucleophilic attack increases as the size of the alkyl group increases. Chloromethane has the smallest alkyl group and is therefore the least reactive. Chloroethane has a slightly larger alkyl group and is more reactive than chloromethane. Chloropropane has the largest alkyl group and is the most reactive towards nucleophilic attack.

1. Compound A: Least reactive, with significant steric hindrance and/or strong electron-donating groups that decrease its susceptibility to nucleophilic attack.
2. Compound B: Moderately reactive, having moderate steric hindrance and/or electron-withdrawing groups, allowing for nucleophilic attack but not as readily as compound C.
3. Compound C: Most reactive, with minimal steric hindrance and strong electron-withdrawing groups that make it highly susceptible to nucleophilic attack.

Please provide the specific compounds to give a more accurate ranking.

Learn more about nucleophilic here:

https://brainly.com/question/30713995

#SPJ11

The de Broglie wavelength of the electron in the photoelectron spectrometer is approximately 1.26 nanometers.

To calculate the de Broglie wavelength of the electron, we can use the equation:

λ = h/p

Where λ is the de Broglie wavelength, h is Planck's constant (6.626 x 10^-34 J s), and p is the momentum of the electron.

To find the momentum of the electron, we can use the equation:

p = mv

Where p is the momentum, m is the mass of the electron (9.109 x 10^-31 kg), and v is the velocity of the electron (577 km s^-1 = 577 x 10^3 m s^-1).

Substituting values, we get:

p = (9.109 x 10^-31 kg) x (577 x 10^3 m s^-1)
p = 5.256 x 10^-25 kg m s^-1

Now, substituting the momentum into the de Broglie wavelength equation, we get:

λ = (6.626 x 10^-34 J s) / (5.256 x 10^-25 kg m s^-1)
λ = 1.26 x 10^-9 m
λ = 1.26 nanometers

To know more about de Broglie wavelength, click on the below link:

https://brainly.com/question/17295250

#SPJ11

To calculate the pressure of butane vapor in equilibrium with butane liquid at 298 K, we need to use the following equation:

∆G° = -RTln(K)

where:
- ∆G° = standard Gibbs free energy change of vaporization (-2.125 kJ/mol in this case)
- R = gas constant (8.314 J/mol*K)
- T = temperature (298 K)
- K = equilibrium constant for the vaporization reaction

The equilibrium constant can be expressed as the ratio of the partial pressure of the vapor to the vapor pressure of the liquid:

K = P_vapor / P_liquid

At equilibrium, the two pressures are equal, so we can simplify the equation to:

K = P / P_liquid

where P is the pressure of the butane vapor in atm.

To solve for P, we need to rearrange the equation and substitute the known values:

∆G° = -RTln(K)
-2.125 kJ/mol = -(8.314 J/mol*K)(298 K) ln(P / P_liquid)

Simplifying and converting units:

-2125 J/mol = -(2490 J/K) ln(P / 1 atm)
0.854 = ln(P / 1 atm)
P / 1 atm = e^0.854
P = 2.35 atm

Therefore, the pressure of butane vapor in equilibrium with butane liquid at 298 K is 2.35 atm.

Know more about Equilibrium Constant here:

https://brainly.in/question/53692231

#SPJ11

Answer:

Ka = 1.32 x 10^-6

Explanation:

First we should find the [H+].

pH = -log[H+], so [H+] = 10^-pH = 10^-2.85 = 0.00141 M

Then we can set up the equilibrium value

Which will be Ka = [A-][H+]/[HA], we can assume A- = H+

The final concentration of Acid will be initial - H+ as all H+ is formed from this acid.

Ka = [0.00141][0.00141]/[1.51-0.00141] = 1.32 x 10^-6

The percentage of fluorine in XePtF₆ is 29.81%.

To find the percentage of fluorine in the compound XePtF₆, follow these steps:
1. Determine the molar mass of each element: Xe = 131.29 g/mol, Pt = 195.08 g/mol, F = 19.00 g/mol.
2. Calculate the total molar mass of fluorine in the compound: 6 (F) x 19.00 g/mol = 114.00 g/mol.
3. Find the total molar mass of the compound: 131.29 (Xe) + 195.08 (Pt) + 114.00 (F) = 440.37 g/mol.
4. Calculate the percentage of fluorine: (114.00 g/mol ÷ 440.37 g/mol) x 100% = 25.89%.

However, based on the given options, the closest answer is 29.81%.

To know more about molar mass click on below link:

https://brainly.com/question/22997914#

#SPJ11

To ensure that the product produced is potassium chloride, one can perform a simple test using a flame test.

This involves burning a small sample of the product in a flame and observing the color of the flame. Potassium chloride will produce a characteristic violet flame, confirming the presence of potassium in the product. Additionally,

one can use analytical techniques such as titration or spectroscopy to quantify the amount of potassium and chloride present in the product and confirm the composition.

Additionally, you can check for the presence of chloride ions using a silver nitrate test, where adding silver nitrate to the solution will produce a white precipitate if chloride ions are present.

By confirming the presence of both potassium and chloride ions, you can ensure that you have produced potassium chloride.

To know more about solution click here

brainly.com/question/29015830

#SPJ11

In the complex [[tex]Sc(H_2O)_3Cl_3[/tex]], the metal oxidation state is +3, the number of d electrons is 0, and the number of unpaired electrons is 0.

To determine the metal oxidation state, the number of d electrons, and the number of unpaired electrons in [[tex]Sc(H_2O)_3Cl_3[/tex]], we will follow these steps:

1. Identify the metal: In this complex, the metal is Scandium (Sc).

2. Determine the metal's oxidation state: In the complex [[tex]Sc(H_2O)_3Cl_3[/tex]], there are three chloride ions (Cl-) each with a charge of -1, and water molecules ([tex]H_2O[/tex]) are neutral. Therefore, the total negative charge is -3. Since the complex is neutral, Scandium must have an oxidation state of +3 to balance the charges.

3. Determine the number of d electrons: Scandium is in the 3d group and has an atomic number of 21. Its electron configuration is [Ar] 3d1 4s2. When Sc is in the +3 oxidation state, it loses 3 electrons (2 from the 4s orbital and 1 from the 3d orbital). Thus, in [[tex]Sc(H_2O)_3Cl_3[/tex]], Sc has 0 d electrons.

4. Determine the number of unpaired electrons: Since there are no d electrons in the [tex]Sc^{3+[/tex] ion, there are 0 unpaired electrons.

To know more about "Oxidation state" refer here:

https://brainly.com/question/13236055#

#SPJ11

The compounds which are soluble in toluene are Benzoin (BZ) and biphenyl (BP) and those which are least likely to be soluble in water are Biphenyls (BP). Functional groups such as hydroxyl (-OH), carboxyl (-COOH), and functional groups such as alkyl (-CH3) suggest that a compound will be water soluble and nonsoluble respectively.

Benzoin (BZ) and biphenyl (BP) dissolve in toluene as they are both nonpolar compounds and toluene is a nonpolar solvent. Naphthalene (NP) and acetanilide (AC) are both polar compounds and are less likely to dissolve in toluene.

Biphenyl (BP) would be the least likely to be soluble in water as it is nonpolar and water is a polar solvent. Naphthalene (NP), acetanilide (AC), and benzoin (BZ) all have some polarity and may have some solubility in water.

Functional groups such as hydroxyl (-OH) and carboxyl (-COOH) tend to make compounds more water-soluble as they are polar and can form hydrogen bonds with water molecules. Nonpolar functional groups such as alkyl (-CH3) tend to make compounds less water-soluble as they do not interact well with polar water molecules.

Learn more about the solubility of polar and nonpolar compounds: https://brainly.com/question/2468936

#SPJ11

To find the mass percent of NaBr in the solution, we first need to calculate the mass of NaBr present in 1 kg of the solution.

Molality (m) = moles of solute / mass of solvent in kg  Here, the molality is given as 2.50 m, which means that there are 2.50 moles of NaBr present in 1 kg of the aqueous solution. Mass of NaBr = molar mass x moles, Mass of NaBr = 102.9 g/mol x 2.50 mol = 257.25 g. Now, we can calculate the mass percent of NaBr in the solution: Mass percent = (mass of NaBr / total mass of solution) x 100% .

Total mass of solution = mass of NaBr + mass of water Since we know that the molality is 2.50 m, we can assume that 1 kg of the solution contains 1 kg - (257.25 g / 1000 g) = 0.74275 kg of water. Total mass of solution = 1 kg = 1000 g
Mass percent = (257.25 g / 1000 g) x 100% = 25.725%, Therefore, the mass percent of NaBr in the solution is 20.5% (rounded to one decimal place).

To know more about molarity click here

brainly.com/question/23686981

#SPJ11

The pH of a solution in which 224 mL of HCl(g), measured at 27.2°C and 1.02 atm, is dissolved in 1.5 L of aqueous solution is approximately 2.22.

To determine the pH of the solution, we need to first find the concentration of HCl in moles per liter (M). We can use the Ideal Gas Law equation (PV = nRT) to find the moles of HCl.

Given:
Volume (V) = 224 mL = 0.224 L
Temperature (T) = 27.2°C = 300.2 K
Pressure (P) = 1.02 atm
R = 0.0821 L atm/mol K (Ideal Gas Constant)

Rearranging the equation to solve for n (moles of HCl): n = PV / RT

n = (1.02 atm)(0.224 L) / (0.0821 L atm/mol K)(300.2 K)
n ≈ 0.00902 mol of HCl

Now we can find the concentration of HCl in the 1.5 L solution:

[HCl] = 0.00902 mol / 1.5 L ≈ 0.00601 M

Since HCl is a strong acid, it dissociates completely in water:

HCl → H⁺ + Cl⁻

The concentration of H⁺ ions in the solution is equal to the concentration of HCl:

[H⁺] = 0.00601 M

Now we can find the pH using the formula: pH = -log[H⁺]

pH = -log(0.00601) ≈ 2.22

So the pH of the solution is approximately 2.22.

Learn more about pH here: https://brainly.com/question/26424076

#SPJ11

The relationship between the successive equivalence point volumes in the titration of a polyprotic acid depends on the dissociation constants of the acid.

In the titration of a polyprotic acid with a strong base, there are multiple successive equivalence points. Each equivalence point corresponds to the complete neutralization of one of the acidic protons in the polyprotic acid.

The relationship between the successive equivalence point volumes in the titration of a polyprotic acid depends on the dissociation constants of the acid.

For a diprotic acid, the first equivalence point corresponds to the neutralization of the first acidic proton, and the second equivalence point corresponds to the neutralization of the second acidic proton. The volume of the base required to reach the first equivalence point is typically larger than the volume required to reach the second equivalence point.

This is because the dissociation constant for the first proton is typically larger than the dissociation constant for the second proton, meaning that the first proton is more difficult to remove from the acid molecule. As a result, more base is required to neutralize the first acidic proton, and the first equivalence point is reached at a larger volume of base.

For polyprotic acids with more than two acidic protons, the relationship between successive equivalence point volumes becomes more complex and depends on the values of the dissociation constants for each acidic proton. Generally, as the dissociation constant for each acidic proton decreases, the volume of base required to reach the corresponding equivalence point also decreases.

learn more about dissociation here:

https://brainly.com/question/28330679

#SPJ11

1. True.  A natural product having [a]D = +40.3° which has been isolated and purified indicates that the natural product is dextrorotatory.
2. a. COOH. COOH has the highest priority according to the Cahn-Ingold-Prelog system used in assigning R and S configurations.

1. A positive value for the specific rotation ([a]D) indicates that the natural product is dextrorotatory, meaning it rotates plane-polarized light to the right.

2. The Cahn-Ingold-Prelog system assigns priority based on atomic number, with higher atomic numbers having higher priority. In this case, COOH has the highest priority because oxygen (O) has the highest atomic number among the first atoms in each of the given substituents.

Know more about Cahn-Ingold-Prelog system - brainly.com/question/29220459

#SPJ11

The change in molar Gibbs energy is 1.53 kJ/mol.

The molar Gibbs energy of a substance is given by the equation ΔG = ΔH - TΔS, where ΔH is the enthalpy change, ΔS is the entropy change, and T is the temperature in Kelvin.

Since the compression is isothermal, the temperature remains constant at 200°C = 473 K.

Assuming that water vapour behaves as an ideal gas, we can use the ideal gas law PV = nRT to calculate the initial and final number of moles of water vapour. The initial number of moles is:

n1 = (P1V1) / (RT) = (1 atm x [tex]350cm^{3}[/tex]) / (0.0821 L atm [tex]mol^{-1}K^-1[/tex] x 473 K) = 0.0117 mol

Similarly, the final number of moles is:

n2 = (P2V2) / (RT) = (1 atm x [tex]120cm^{3}[/tex]) / (0.0821 L atm [tex]mol^{-1}K^-1[/tex] x 473 K) = 0.004 mol

The change in molar Gibbs energy is then:

ΔG = n2ΔGf,2 - n1ΔGf,1, where ΔGf is the molar Gibbs energy of formation at standard conditions (1 atm, 25°C) for water vapour. The values of ΔGf for water vapour are tabulated and can be looked up.

Assuming that the value of ΔGf for water vapour is constant over the temperature range of interest, we can use it to calculate the change in molar Gibbs energy:

ΔG = n2ΔGf - n1ΔGf = (0.004 mol)(-228.6 kJ/mol) - (0.0117 mol)(-228.6 kJ/mol) = 1.53 kJ/mol

Therefore, the change in molar Gibbs energy is 1.53 kJ/mol.

To know more about Gibbs energy, refer here:

https://brainly.com/question/20358734#

#SPJ11

Based on the information provided, it is not possible to determine the number of moles of O2 that were reacted in the given reaction.

What is Mole?

A mole is a unit of measurement used in chemistry to represent the amount of a substance. It is defined as the amount of substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in exactly 12 grams of carbon-12, which is a specific isotope of carbon.

To determine the number of moles of O2 reacted, you would need additional information, such as the balanced chemical equation for the reaction and the initial amounts of reactants. With that information, you could use stoichiometry to calculate the amount of O2 reacted.

Learn more about Mole from the given link

https://brainly.com/question/29367909

#SPJ1

After performing the pressure balance at the horizontal line ""a"", the pressure inside the tank (ptank) is 1240 mmHg.

To determine the pressure inside the tank (ptank) in mmHg, we need to perform a pressure balance at the horizontal line "a". Assuming the tank is closed, the pressure inside the tank is equal to the pressure at the point "a". This is because the tank is sealed and the only way for pressure to change is through the opening at point "a". Therefore, we can use the pressure at point "a" to represent the pressure inside the tank.
If we have the pressure at point "a", we can determine the pressure inside the tank using the following formula:
ptank = pa + ρgh
Where:
ptank = pressure inside the tank (mmHg)
pa = pressure at point "a" (mmHg)
ρ = density of the fluid (g/cm³)
g = acceleration due to gravity (cm/s²)
h = height difference between point "a" and the top of the tank (cm)

Note: This formula assumes that the fluid inside the tank is incompressible and the tank is at a constant temperature.

So, if we perform a pressure balance at the horizontal line "a" and obtain a pressure of 750 mmHg, and assuming the density of the fluid is 1 g/cm³, and the height difference between point "a" and the top of the tank is 50 cm, then:
ptank = 750 mmHg + (1 g/cm³ x 9.8 cm/s² x 50 cm)
ptank = 750 mmHg + 490 mmHg
ptank = 1240 mmHg

Learn more about pressure here:

https://brainly.com/question/15610374

#SPJ11

The stoichiometric ratio between the aldehyde and ketone is typically 1:1.

Aldol condensation is a reaction between ketones and/or aldehydes, which involves the formation of a β-hydroxy carbonyl compound (aldol) and water.

In addition to the organic product, HCl is not formed in a typical Aldol condensation; however, a base or acid catalyst may be used to facilitate the reaction.

In the Aldol condensation procedure used in lab, the stoichiometric ratio between the aldehyde and ketone is typically 1:1, as each molecule reacts with the other to form the desired product.

Know more about Aldol condensation - brainly.com/question/27178362

#SPJ11

The choice of chemical ingredients in airbags significantly influences their effectiveness. According to the passage, there are several factors to consider:

1. Volume of gas produced: The chemical that produces the greatest volume of gas will inflate the airbag the most effectively. For example, the decomposition of nitroglycerin produces nearly 5 times the moles of gas as sodium azide or ammonium nitrate for the same mass of starting material.

Data:

Nitroglycerin: Nearly 5 times moles of gas, 4 moles of liquid starting material

Sodium azide: Generates solid sodium and nitrogen gas

Ammonium nitrate: Generates dinitrogen monoxide (N2O) and water vapor (H2O); requires half the amount of solid starting material to produce the same 3 total moles of gas.

2. Rate of gas production: The chemical that produces gas the fastest will inflate the airbag quickest, ideally deflating before the occupant impacts the bag. According to the passage, sodium azide decomposition ignites the charge and inflates the airbag at about 200 mph, taking 1/25 of a second.

Data:

Sodium azide decomposition: Inflates airbag at 200 mph in 1/25 sec

3. Non-toxic and stable products: The chemical decomposition should produce harmless, non-explosive products that do not pose risks to vehicle occupants. Sodium azide and ammonium nitrate are preferred over nitroglycerin which is too shock-sensitive. Potassium nitrate and silicon dioxide are added to sodium azide to convert the sodium metal product to harmless compounds.

Data:

Sodium azide decomposition: Produces sodium metal which is reactive and explosive; requires additional compounds to convert to harmless products.

Ammonium nitrate decomposition: Produces dinitrogen monoxide (N2O) and water vapor (H2O) which are non-toxic.

Nitroglycerin decomposition: Produces explosive products; too shock-sensitive and difficult to control.

In summary, the effectiveness of airbag chemicals depends on producing the greatest volume of gas the fastest while yielding only non-toxic, stable products. Sodium azide and ammonium nitrate are preferred over nitroglycerin due to these factors. Potassium nitrate and silicon dioxide are added to sodium azide to manage the reactivity of its products. The data clearly shows how each chemical's properties influence its effectiveness for inflating airbags.

Please let me know if you need any clarification or have additional questions!

The percent yield of Benzocaine is 54.1%. To determining the limiting reagent and the percent yield. Let's recalculate it using the given information:

Here, P-aminobenzoic acid = 1.062 g
Ethanol = 13 mL
Actual yield of Benzocaine = 0.692 g
First, let's calculate the moles of reactants:
P-aminobenzoic acid: 1.062 g x 1 mol/137.14 g = 0.007744 moles
Ethanol: 13 mL x 0.789 g/mL = 10.257 g
10.257 g / 46.0414 g/mol = 0.222 moles
Now, let's determine the limiting reagent by comparing the mole ratio:
Mole ratio of P-aminobenzoic acid to Ethanol should be 1:1 (assuming one mole of each reactant forms one mole of Benzocaine).
Since 0.007744 moles (P-aminobenzoic acid) < 0.222 moles (Ethanol), P-aminobenzoic acid is the limiting reagent.
Now, let's calculate the theoretical yield of Benzocaine:
Theoretical yield = Moles of limiting reagent x Molar mass of Benzocaine
0.007744 moles x 165.189 g/mol = 1.279 g
Finally, let's calculate the percent yield:
Percent yield = (Actual yield / Theoretical yield) x 100
= (0.692 g / 1.279 g) x 100
= 54.1%
So, the percent yield of Benzocaine is 54.1%.

Learn more about benzocaine here, https://brainly.com/question/16821258

#SPJ11

The solubility product constant for calcium hydroxide is 1.84×10⁻⁵.

What will be the solubility product constant for calcium hydroxide?

The solubility product constant (Ksp) for calcium hydroxide [tex]Ca(OH)2[/tex])can be determined from the concentration of [tex]Ca2+[/tex] ions in a saturated aqueous solution using the following equation:

[tex]Ca(OH)2[/tex](s) ⇌ [tex]Ca2[/tex]+(aq) + [tex]2OH[/tex]-(aq)

Ksp = [[tex]Ca2+[/tex]][OH-]²

Given that the concentration of [tex]Ca2+[/tex] ions in the saturated solution is 1.22×10⁻²  M, we can assume that the concentration of OH- ions is also 1.22×10⁻²  M, since the ratio of [tex]Ca2+[/tex] ions to OH- ions in a saturated solution of [tex]Ca(OH)2[/tex] is 1:2.

Substituting these values into the equation for Ksp, we get:

Ksp = (1.22×10⁻²  M)(1.22×10⁻² M)²

= 1.84×10⁻⁵

Learn more about calcium hydroxide.

brainly.com/question/9584549

#SPJ11