at a particular temperature and pressure, the dissociation constant for water (kw) is 1.4×10-15. what is the poh of pure water under these conditions?

In the oxidation reaction of benzoin to benzil by ammonium nitrate, N₂(g) is formed via a radical mechanism involving NO₂ and HONO radicals, leading to N₂O₃, which then decomposes to N₂ and O₂.

1. Ammonium nitrate (NH₄NO₃) dissociates into NH₄⁺ and NO₃⁻ ions.
2. The NO₃⁻ ion undergoes homolytic cleavage, generating a NO₂ radical and O atom.
3. The O atom reacts with an NO₂ radical to form an HONO radical.
4. Another NO₂ radical reacts with the HONO radical to form N₂O₃ (dinitrogen trioxide).
5. N₂O₃ decomposes into N₂(g) (nitrogen gas) and O₂(g) (oxygen gas).

This mechanism demonstrates the formation of N₂(g) in the oxidation reaction of benzoin to benzil by ammonium nitrate.

To know more about oxidation reaction click on below link:

https://brainly.com/question/2525090#

#SPJ11

1. The enthalpy of reactant is 80 KJ

2. The enthalpy of product is 160 KJ

3. The activaition energy for the reaction is 160 KJ

4. The heat of reaction is 80 KJ

5. The forward reaction is endothermic

6. The addition of catalyst will lower the activation energy

7. The enthalpy of reactant is less than the enthalpy of product

8. False

9. False

10. False

The enthalpy of reactants defines the energy of the reactants while the enthalpy of products defines the energy of product.

From the diagram given, we obtained the following

The activation energy for the reaction can be obtain as follow:

Activation energy = Peak energy - Energy of reactant

Activation energy = 240 - 80

Activation energy = 160 KJ

The heat of reaction can be obtain as follow:

Heat of reaction = Enthalpy of products - Enthalpy of reactants

Heat of reaction = 160 - 80

Heat of reaction = 80 KJ

The heat of reaction obtained above is positive (i.e 80 KJ).

Thus, we can conclude that the forward reaction is endothermic reaction.

A catalyst is a substance which alters the rate of a reaction. Catalyst tends to lower the activation energy of a reaction, thereby enhacing the reaction rate.

However, we must take note of the following:

From the diagram above, we obtain:

We can see that the enthalpy of the reactant is less than that of the products.

Learn more about activation energy:

https://brainly.com/question/29060218

#SPJ1

The dehydration of alpha-terpineol to alpha-pinene is a complex reaction that involves several intermediates.

The first step is the protonation of the hydroxyl group in alpha-terpineol, which is catalyzed by an acid catalyst. This step generates a carbocation intermediate, which is stabilized by the adjacent double bond in the terpene structure.

The carbocation intermediate undergoes a series of rearrangements, leading to the formation of a more stable carbocation species. In the case of alpha-terpineol, the carbocation undergoes a 1,2-methyl shift, resulting in the formation of a secondary carbocation. This carbocation then undergoes a second 1,2-methyl shift, leading to the formation of a tertiary carbocation.

The final step in the mechanism is the elimination of a proton from the tertiary carbocation, resulting in the formation of alpha-pinene. This reaction is facilitated by a base catalyst, which removes the proton and promotes the elimination of a molecule of water.

Overall, the mechanism of the dehydration of alpha-terpineol to alpha-pinene is a multistep process that involves the formation of several intermediates. The reaction requires the presence of both an acid and a base catalyst to facilitate the protonation and deprotonation steps.

For more about dehydration:

https://brainly.com/question/16394592

#SPJ11

The molar mass of the compound added to a compound of CCl₄ lowering the freezing point of the solvent by 10.5K is approximately 141.69 g/mol.

To calculate the molar mass of the compound, we'll use the formula for freezing point depression:

ΔTf = Kf * m

where ΔTf is the change in freezing point (10.5K), Kf is the cryoscopic constant of CCl₄ (5.03 K kg/mol), and m is the molality of the solution.

First, we need to find the molality of the solution:

molality = moles of solute / kg of solvent

moles of solute = (mass of solute) / (molar mass of solute)

We need to find the molar mass of the solute, which we'll call "M":

molality = (100 g / M) / (750 g / 1000 g/kg)

Now, we can plug in the values for ΔTf and Kf:

10.5 K = (5.03 K kg/mol) * (100 g / M) / (750 g / 1000 g/kg)

Solve for "M":

M = (100 g / 750 g / 1000 g/kg) * (5.03 K kg/mol) / 10.5 K

M ≈ 141.69 g/mol

The molar mass of the compound is approximately 141.69 g/mol.

Learn more about freezing point depression here: https://brainly.com/question/27184453

#SPJ11

Based on the mass spectrum data provided, it can be inferred that the liquid compound contains a heavy isotope that contributes to the equal intensity peaks at m/e = 122 and m/z = 124.

The presence of small fragment ion peaks at m/z = 107 & 109, and at m/z = 79, 80, 81, & 82 suggest that the compound undergoes fragmentation during the mass spectrometry process, generating these specific ion patterns.

The base peak at m/z = 43, along with fragment ions at m/z = 41 & 39, further supports the compound's fragmentation pattern. The compound's molecular structure and composition can be deduced by analyzing these mass spectrum characteristics.

To know more about mass spectroscopy, click on the below link:

https://brainly.com/question/28497322

#SPJ11

The dissociation reaction of diethylamine, which is a weak base with a Kb of 1.3*10⁻³, can be represented as follows: C₄H₁₁N + H₂O ⇌ C₄H₁₀NH₂⁺ + OH⁻ In this reaction, diethylamine (C₄H₁₁N) reacts with water (H₂O) to produce diethyl ammonium ion (C₄H₁₀NH₂⁺) and hydroxide ion (OH⁻). This reaction is an example of a weak base reacting with water to form a conjugate acid and hydroxide ion.

The dissociation reaction of diethylamine is a weak base with a K value of 1.3 x 10⁻³. The dissociation reaction of diethylamine can be represented as follows:

Diethylamine (C₄H₁₁N) + H₂O (l) ⇌ C₄H₁₀NH⁺(aq) + OH⁻ (aq)

In this reaction, diethylamine accepts a proton (H+) from water, forming its conjugate acid (C₄H₁₀NH⁺) and hydroxide ions (OH⁻). Since diethylamine is a weak base, it does not dissociate completely in water, as indicated by its Kb value.

Learn more about the weak base at https://brainly.com/question/31309380

#SPJ11

The purpose of adding sulfuric acid in a reaction is to act as a catalyst and increase the rate of the reaction. Sulfuric acid also helps in protonating the reactants and forming intermediate compounds, which then react to produce the desired products.

Additionally, sulfuric acid can also remove water molecules from the reaction mixture, thereby shifting the equilibrium towards the formation of the desired products.

However, it is important to handle sulfuric acid with care as it is a strong acid and can cause burns and other hazards if not handled properly.
The purpose of adding sulfuric acid in a reaction is to act as a catalyst, which helps accelerate the reaction without being consumed itself. Sulfuric acid also serves as a strong dehydrating agent and can help generate specific products, such as esters or salts, depending on the reactants involved.

Learn more about sulfuric acid here:

https://brainly.com/question/1107054

#SPJ11

The species present in the weak acid solution before the titration starts are HA, H+ (H3O+), A-, and H2O.

Before the titration starts, the weak acid solution contains HA (the weak acid) and some H+ (or H3O+) ions due to the dissociation of the weak acid in water. There may also be some undissociated HA molecules present. A- is the conjugate base of the weak acid, which is formed when the weak acid donates a hydrogen ion (H+) to the solution. It carries a negative charge (anion) and is usually present in small amounts compared to the undissociated HA molecules. Additionally, there could be some water molecules (H2O) present in the solution.

No species of the strong base, such as Na+ or OH-, are present in the solution before the titration begins.

To know more about Weak Acids:

https://brainly.com/question/15726034

#SPJ11

The pH of a 0.114 M monoprotic acid with a Ka of [tex]1.258 * 10^{-3[/tex]is 2.54.

To find the pH of a 0.114 M monoprotic acid with a Ka of [tex]1.258 * 10^{-3[/tex], we need to use the equation for calculating the pH of a weak acid:
pH = pKa + log([A-]/[HA])
First, we need to find the pKa, which can be calculated using the Ka value:
[tex]pKa = -log(Ka) = -log(1.258 * 10^{-3}) = 2.9[/tex]
Now we can plug in the values for pKa and the concentration of the acid (0.114 M) into the pH equation:
pH = 2.9 + log([A-]/[HA])
Since the acid is monoprotic, [A-] is equal to the concentration of the conjugate base (which is formed when the acid donates a proton), and [HA] is equal to the concentration of the undissociated acid. We can assume that the concentration of the conjugate base is very small compared to the concentration of the acid, so we can simplify the equation to:
[tex]pH = 2.9 + log([A^-]/0.114)[/tex]
We can solve for [A-] using the expression for the dissociation constant:
[tex]Ka = [A^-][H^+]/[HA][/tex]
[tex]1.258 * 10^{-3} = [A^-]^2 / (0.114 - [A^-])[/tex]
Simplifying this equation gives us a quadratic equation:
[tex][A^-]^2 + 1.258 * 10^{-3} [A^-] - 1.258 * 10^{-3 }* 0.114 = 0[/tex]
Solving this equation using the quadratic formula gives us:
[tex][A^-] = 0.0508 M[/tex]
Now we can plug in the values for pKa and [A-] into the pH equation:
pH = 2.9 + log(0.0508/0.114) = 2.54
Therefore, the pH of a 0.114 M monoprotic acid with a Ka of [tex]1.258 * 10^{-3[/tex]is 2.54.

Learn more about concentration :

https://brainly.com/question/10725862

#SPJ11

Answer:

Chemical formula:

Chemical formulas give information regarding what atoms (and how many of them) make up a compound or ion. On their basis the molar mass of the chemical species is found.

Explanation:

if it helped u please mark me a brainliest :))

The presence of the myoglobin protein changes the relative affinity of heme for oxygen and carbon monoxide by inducing conformational changes in the binding site.

The relative affinity of heme for oxygen ([tex]O_{2}[/tex]) and carbon monoxide (CO) is significantly altered by the presence of myoglobin. Myoglobin is a protein that binds to oxygen and facilitates its transport in muscles. The presence of myoglobin changes the binding preferences of the heme group, which is the oxygen-binding component of the protein.

In the absence of myoglobin, the heme group has a higher affinity for CO, which can competitively inhibit oxygen binding. However, when myoglobin is present, the binding site of the heme group undergoes conformational changes. This change in structure reduces the affinity of heme for CO while increasing its affinity for oxygen.

These alterations in the binding site are crucial for the proper functioning of myoglobin. The increased affinity for oxygen allows myoglobin to efficiently transport and store oxygen in muscle tissues, while the decreased affinity for CO prevents the potentially harmful effects of CO binding.

To know more about Heme:

https://brainly.com/question/28165960

#SPJ11

The pH of the buffer is 3.75. This is because the pKa of formic acid is 3.75, and the concentrations of the acid and its conjugate base in the buffer remain constant.

The pH of a buffer is determined by the concentrations of both the acid and its conjugate base. Since the pKa of formic acid is 3.75, this means the acid and its conjugate base must have concentrations of 0.20 M and 0.21 M respectively in order to keep the pH at 3.75. This is the case with the given buffer, therefore the pH is 3.75.

Learn more about formic acid at: https://brainly.com/question/10738052

#SPJ11

To prepare the desired compound using the Diels-Alder reaction, you can follow two different ways:

1. First Method: Utilize a diene (a molecule with two double bonds separated by a single bond) and a dienophile (an electron-deficient alkene or alkyne) that are suitable for the desired product. Combine these reactants under appropriate reaction conditions to achieve the cyclohexene ring system characteristic of the Diels-Alder reaction.

2. Second Method: Employ an intramolecular Diels-Alder reaction by designing a molecule containing both the diene and dienophile within the same structure. In this case, the reaction will occur within the molecule, leading to a cyclic product.

The preferred method depends on factors such as reaction conditions, availability of reactants, and desired yield. Generally, the intramolecular Diels-Alder reaction (second method) is preferred due to its increased regioselectivity and stereocontrol, which can lead to higher yields and more specific products. However, it may require more complex starting materials. The choice ultimately depends on the specific target compound and the chemist's preferences.

To know more about Diels-Alder reaction click here:

https://brainly.com/question/29972519

#SPJ11

The pressure exerted by the gas mixture composed of 48.5 g He and 94.6 g CO₂ is E. 46.6 atm.

To determine the pressure exerted by the gas mixture in the tank, we'll use the Ideal Gas Law: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.

First, we need to calculate the total number of moles (n) for both He and CO₂. We can do this using their molar masses: He = 4.00 g/mol and CO2 = 44.01 g/mol.

Moles of He = 48.5 g / 4.00 g/mol = 12.125 mol
Moles of CO₂ = 94.6 g / 44.01 g/mol = 2.149 mol
Total moles (n) = 12.125 mol + 2.149 mol = 14.274 mol

Now, we can use the Ideal Gas Law to find the pressure (P). We'll use the gas constant R = 0.0821 L·atm/mol·K and the given values for V (10.0 L) and T (398 K):

P = nRT / V
P = (14.274 mol)(0.0821 L·atm/mol·K)(398 K) / 10.0 L
P = 46.6 atm

So the pressure exerted by the gas mixture is 46.6 atm, which corresponds to option E.

Learn more about Ideal Gas Law here: https://brainly.com/question/27870704

#SPJ11

Methane and chlorine do not react with strong bases like NaOH when heated above 100°C or made extremely weakly acidic. By giving thorough methods for resolving chemical problems, it seeks to aid students in developing their analytical and problem-solving abilities. Hence (c) is the correct option.

It is discovered that ideal gas calculations can provide a reliable estimate of the loss in mass flow caused by swirl even when applied to real gases. None of these structural MRI abnormalities, nevertheless, appear to be diagnostically significant for CBD. It offers expert recommendations and discusses the real-world applications of the fundamental scientific concepts covered in Volume I.

To know more about Methane, click here:

https://brainly.com/question/2127750

#SPJ4

The pH of a solution depends on the concentration of hydrogen ions (H+) in the solution.

Acetic acid [tex](CH_{3} COOH)[/tex]is a weak acid, which means that it only partially dissociates in water, producing fewer H+ ions compared to a strong acid like hydrochloric acid (HCl).

Therefore, a 0.25 M solution of acetic acid will have a lower pH than a 0.25 M solution of hydrochloric acid, because the concentration of H+ ions in the acetic acid solution will be lower due to its weak acidic nature. The pH of the acetic acid solution will be slightly acidic, while the pH of the hydrochloric acid solution will be strongly acidic.

Learn more about hydrogen ions

https://brainly.com/question/20309096

#SPJ4

The surface described by the equation ρ² - 3ρ cos(φ) = 0 is a cone with its vertex at the origin and its axis along the z-axis.

The equation given is in cylindrical coordinates where ρ is the radial distance from the origin, φ is the angle made by the radius vector with the x-axis, and z is the vertical coordinate. To visualize this surface, we can rewrite the equation as ρ(ρ-3cos(φ))=0, which means either ρ=0 or ρ=3cos(φ).

When ρ=0, we get a point at the origin. When ρ=3cos(φ), we get a cone with its vertex at the origin and its axis along the z-axis. To see this, we can rewrite ρ=3cos(φ) as z=ρcos(φ)=3cos²(φ), which is the equation of a double-napped cone with its vertex at the origin and its axis along the z-axis.

learn more about cylindrical coordinates here:

https://brainly.com/question/31046653

#SPJ11

To calculate the pH of a 0.500 M aqueous solution of NH3, we first need to find the concentration of hydroxide ions (OH-) in the solution. NH3 is a weak base, so it reacts with water to produce hydroxide ions

the conjugate acid[tex]NH4+: NH3 + H2O ⇌ NH4+ + OH[/tex]- The equilibrium constant for this reaction is the base dissociation constant, Kb, which is given as 1.77x10^-5. Using the expression for Kb, we can calculate the concentration of OH-:

[tex]Kb = [NH4+][OH-] / [NH3]1.77x10^-5 = x^2 / (0.500 - x)[/tex]

Assuming x is much smaller than 0.500, we can approximate 0.500 - x to be 0.500, and solve for x:

[tex]x = sqrt(Kb*[NH3]) = sqrt(1.77x10^-5 * 0.500) = 0.00133 M[/tex]

The concentration of OH- in the solution is 0.00133 M, so we can calculate the pH as:

pH = 14 - pOH = 14 - (-log[OH-]) = 11.88

Therefore, the pH of a 0.500 M aqueous solution of NH3 is 11.88.

Learn more about   NH3  here:

https://brainly.com/question/16119085

#SPJ11

the mole fraction of K_2s in a solution that is 18% mass K_2s is 0.0228 or 2.28%.

To find the mole fraction of K_2s in a solution that is 18% mass K_2s, we need to first convert the mass percentage to mole fraction.

Let's assume we have 100 grams of the solution. Since it is 18% mass K_2s, we have 18 grams of K_2s.

To find the moles of K_2s, we need to divide the mass by the molar mass. The molar mass of K_2s is 174.27 g/mol.

So, moles of K_2s = 18 g / 174.27 g/mol = 0.1034 mol

Now, let's find the moles of the solvent (assuming it is water) using the total mass of the solution.

Moles of solvent = (100 g - 18 g) / 18.02 g/mol = 4.436 mol

The total moles of solute and solvent in the solution is:

Total moles = moles of K_2s + moles of solvent = 0.1034 mol + 4.436 mol = 4.5394 mol

Finally, we can find the mole fraction of K_2s:

Mole fraction of K_2s = moles of K_2s / total moles = 0.1034 mol / 4.5394 mol = 0.0228 or 2.28% (rounded to two decimal places)

Therefore, the mole fraction of K_2s in a solution that is 18% mass K_2s is 0.0228 or 2.28%.

Visit here to learn more about mole fraction  : https://brainly.com/question/29808190
#SPJ11

Acidity increases down and right on the periodic table.

Acidity is determined by the tendency of an acid to donate a proton (H+ ion). The electronegativity and size of the atom that loses the proton play important roles in determining acidity. As we move down a group, the size of the atom increases, which makes it easier for it to lose a proton. This is why acidity increases down the periodic table.

On the other hand, as we move across a period from left to right, the electronegativity of the atom increases, which means that it holds onto its electrons more tightly and is less likely to lose a proton.

However, when we move down and right on the periodic table, we see a combination of both factors: the size of the atom is increasing, making it easier to lose a proton, while the electronegativity is also increasing, making it harder to lose a proton. In general, the size factor wins out and acidity increases down and right on the periodic table.

To know more about "Electronegativity" refer here:

https://brainly.com/question/17762711#

#SPJ11

Acidity increases down and right on the periodic table.

Acidity is determined by the tendency of an acid to donate a proton (H+ ion). The electronegativity and size of the atom that loses the proton play important roles in determining acidity. As we move down a group, the size of the atom increases, which makes it easier for it to lose a proton. This is why acidity increases down the periodic table.

On the other hand, as we move across a period from left to right, the electronegativity of the atom increases, which means that it holds onto its electrons more tightly and is less likely to lose a proton.

However, when we move down and right on the periodic table, we see a combination of both factors: the size of the atom is increasing, making it easier to lose a proton, while the electronegativity is also increasing, making it harder to lose a proton. In general, the size factor wins out and acidity increases down and right on the periodic table.

To know more about "Electronegativity" refer here:

https://brainly.com/question/17762711#

#SPJ11

When extracting the aqueous salicylic acid solution with 10% ethyl acetate/hexane, the aqueous layer will be the lower layer.

If dichloromethane were substituted for the 10% ethyl acetate/hexane solution, the aqueous layer would still be the lower layer. This is because dichloromethane has a higher density than the 10% ethyl acetate/hexane solution, and therefore it will be the bottom layer in the separatory funnel.
Hi! In the extraction of aqueous salicylic acid solutions with 10% ethyl acetate/hexane (density ~ 0.7 g/ml), the aqueous layer will be the lower layer because the density of the organic layer (ethyl acetate/hexane) is less than that of the aqueous layer (water).

If dichloromethane (density ~ 1.3 g/ml) were substituted for the 10% ethyl acetate/hexane solution, the aqueous layer would be the upper layer. This is because the density of dichloromethane is higher than that of the aqueous layer, causing it to sink below the aqueous layer.

Learn more about  salicylic acid here ;

https://brainly.com/question/14635153

#SPJ11

The value of ΔG° for the reaction 2Cl(g) ⇌ Cl2(g) at 913 K is approximately -161.4 kJ/mol.

To calculate the value of ΔG° in kJ for the reaction 2Cl(g) ⇌ Cl_{2} (g) at 913 K, given that the equilibrium constant, Kp, is 6.32 x [tex]10^{29}[/tex], we can follow these steps:

Step 1: Use the formula ΔG° = -RT ln(Kp) to calculate ΔG°, where R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and Kp is the equilibrium constant.

Step 2: Convert R to kJ/mol·K by dividing by 1000, so R = 0.008314 kJ/mol·K.

Step 3: Plug in the values into the formula: ΔG° = - (0.008314 kJ/mol·K) × (913 K) × ln(6.32 x [tex]10^{29}[/tex]).

Step 4: Calculate ΔG°, which equals - (0.008314 kJ/mol·K) × (913 K) × ln(6.32 x [tex]10^{29}[/tex]) ≈ -161.4 kJ/mol.

Therefore, the value of ΔG° for the reaction 2Cl(g) ⇌Cl_{2}  (g) at 913 K is approximately -161.4 kJ/mol.

Note that the negative sign indicates that the reaction is spontaneous in the forward direction at this temperature.

To know more about Gibbs Energy:

https://brainly.com/question/31488434

#SPJ11

(a) The pH of a mixture that is 0.150 M in HF and 0.100 M in HClO is 2.14.

(b) The ClO⁻ concentration of the above mixture of HF and HClO is 0.0928 M.

1. To calculate the concentration of H₃O⁺ ions in the solution using the given x value: 0.0072 M.

2.To  Calculate the pH using the formula: pH = -log[H₃O⁺]. Here, pH = -log(0.0072) = 2.14.

3. Since HClO is a weak acid, use the initial concentration of HClO (0.100 M) and subtract the x value (0.0072 M) to find the concentration of ClO⁻ ions: 0.100 - 0.0072 = 0.0928 M.

To know more about pH click on below link:

https://brainly.com/question/2288405#

#SPJ11

The [OH⁻] at 25°C for a solution having a pH of 5.65 is 4.47 × 10⁻⁹ M.

To calculate the [OH⁻] at 25°C for a solution having a pH of 5.65, you can use the following relationship:

pH + pOH = 14

First, you need to determine the pOH:

pOH = 14 - pH

= 14 - 5.65

= 8.35

Next, use the relationship between pOH and [OH⁻]:

pOH = -log10[OH⁻]

Now, solve for [OH⁻]:

[OH⁻] = 10^(-pOH) = 10^(-8.35)

≈ 4.47 × 10⁻⁹ M

So, the concentration of hydroxide ions [OH⁻] in the solution at 25°C with a pH of 5.65 is approximately 4.47 × 10⁻⁹ M.

Learn more about hydroxide ions [OH⁻]: https://brainly.com/question/14619642

#SPJ11

a. The products formed when an ester is hydrolyzed with water and H₂SO₄ are an alcohol and a carboxylic acid.

b. The greater product is carboxylic acid and the lesser product is the original ester.

The alcohol formed has a lower molecular weight than the original ester, as it is missing the carboxylic acid group. The carboxylic acid formed has a greater molecular weight than the original ester, as it is now carrying an additional hydroxyl group. For example, if ethyl acetate is hydrolyzed with water and H₂SO₄, the products formed are ethanol and acetic acid. Ethanol has a lower molecular weight (46 g/mol) than ethyl acetate (88 g/mol), while acetic acid has a greater molecular weight (60 g/mol) than ethyl acetate.

 Learn more about ester: https://brainly.com/question/10840252

#SPJ11

At equilibrium, the concentrations of both products and reactants remain constant, so the [Sn²⁺] will remain 2.0 M.

The reaction is driven by the difference in concentrations between the two half-cells and the reduction potential of the reaction. Since the Pb⁺² concentration is much lower in the left cell, the reaction is driven to the right, where the Sn²⁺ concentration is higher.

This reaction will continue until both sides have equal concentrations, at which point the reaction will reach equilibrium. Since the [Sn²⁺] is higher in the right cell, it will remain at 2.0 M at equilibrium. This is because the reaction is driven by the difference in concentrations and not the absolute value of the concentrations.

Thus, [Sn²⁺] will remain at 2.0 M when the system reaches equilibrium.

know more about equilibrium here

https://brainly.com/question/30807709#

#SPJ11

18.5 g of ethylene is combusted if the complete combustion of an unknown mass of ethylene produces 58.0 g co2.

The balanced chemical equation for the combustion of ethylene is:

C2H4 (g) + 3 O2 (g) → 2 CO2 (g) + 2 H2O (g)

According to the equation, for every 2 moles of CO2 produced, 1 mole of C2H4 is consumed. We can use this relationship to calculate the mass of ethylene combusted if we know the mass of CO2 produced.

The molar mass of CO2 is 44.01 g/mol. The given mass of CO2 produced is 58.0 g. Therefore, the number of moles of CO2 produced is:

58.0 g / 44.01 g/mol = 1.318 mol

Since 2 moles of CO2 are produced for every mole of C2H4 consumed, the number of moles of C2H4 consumed is:

1.318 mol CO2 × (1 mol C2H4 / 2 mol CO2) = 0.659 mol C2H4

The molar mass of C2H4 is 28.05 g/mol. Therefore, the mass of C2H4 combusted is:

0.659 mol C2H4 × 28.05 g/mol = 18.5 g

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

The atomic mass of an atom is the sum of protons and neutrons. So, the atomic mass of this heavier isotope of atom gi is: 82 atomic mass units (amu).

we know that the heavier isotope of the atom gi has 42 neutrons, which is 2 more than the regular atom. This means that the regular atom has 40 neutrons.

The number of electrons in gi 2 is also given as 40. Since atoms are neutral and have the same number of electrons and protons, we can infer that the number of protons in gi 2 is also 40.

To find the atomic mass of gi 2, we need to add the number of protons and neutrons together.

Atomic mass = number of protons + number of neutrons

Atomic mass of gi 2 = 40 protons + 42 neutrons

Atomic mass of gi 2 = 82

Therefore, the atomic mass of gi 2 is 82.

To learn more about equivalence point click here

brainly.com/question/31375551

#SPJ11