A solution contains 1.817 mg of CoSO4 (155.0 grams/mole) per mL. Calculate the volume (in mL) of 0.009795 M Zn2 needed to titrate the excess complexing reagent after the addition of 70.00 mL of 0.009005 M EDTA to a 20.00 mL aliquot of the Co2 solution.

Answers

Answer 1

Answer:

85.952 ml [tex]Zn^2^+[/tex]  needed to titrate the excess complexing reagent .

Explanation:

Lets calculate

After addition of 80 ml of EDTA the solution becomes = 20 + 70 = 90 ml

As the number of moles of [tex]CoSO_4[/tex] =[tex]\frac{Given mass }{molar mass}[/tex]

                                                       =[tex]\frac{1.817}{155}[/tex]

                                                          =0.01172

Molarity = [tex]\frac{no. of moles}{volume of solution}[/tex]

           =[tex]\frac{0.01172}{20}[/tex]

        =0.000586 moles

Excess of EDTA = concentration of EDTA - concentration of CoSO4

                            = 0.009005 - 0.000586

                           = 0.008419 M

As M1V1 ( Excess of EDTA ) = M2V2 [tex](Zn^2^+)[/tex]

           [tex]0.008419\times100ml=0.009795\times V2[/tex]

           [tex]V2=\frac{0.008419\times100}{0.009795}[/tex]

             V2 =85.952 ml

Therefore , 85.952 ml [tex]Zn^2^+[/tex] needed to titrate the excess complexing reagent .


Related Questions

what is the molecular geometry for CH2Br2?

Answers

HCH bond angle is ~110 degrees.

Which element had the smallest atomic radius

Answers

Answer:

helium is the answer

Explanation:

helium is the smallest element in francium is the largest hope this helps

How many protons are in nitrogen

Answers

Answer:

Explanation:

There are 7 protons in nitrogen

7 TYPE OF NITRONGEN

. . .

Element R has three isotopes. The isotopes are present in 0.0398, 0.1614, and 0.7988 relative
abundance. If their masses are 191, 180, and 143 respectively, calculate the atomic mass of element
R. (No decimals)

Answers

The atomic mass of element R is 151 (no decimals).

To calculate the atomic mass of element R, we need to consider the relative abundance of each isotope and its corresponding mass. The atomic mass is the weighted average of the masses of all the isotopes, taking into account their relative abundance.

Given:

Isotope 1: Relative abundance = 0.0398, Mass = 191

Isotope 2: Relative abundance = 0.1614, Mass = 180

Isotope 3: Relative abundance = 0.7988, Mass = 143

To calculate the atomic mass, we multiply the relative abundance of each isotope by its mass, and then sum up the results.

Atomic mass = (Relative abundance of Isotope 1 * Mass of Isotope 1) + (Relative abundance of Isotope 2 * Mass of Isotope 2) + (Relative abundance of Isotope 3 * Mass of Isotope 3)

Atomic mass = (0.0398 * 191) + (0.1614 * 180) + (0.7988 * 143)

Calculating the values:

Atomic mass = 7.6098 + 29.0256 + 114.6872

Atomic mass = 151.3226

Rounding to the nearest whole number, the atomic mass of element R is 151.

For more such question on mass. visit :

https://brainly.com/question/24191825

#SPJ8

Wich stament describes to organ systems working together to get rid of waste played by cells

Answers

Answer:

C. Kidneys filter wastes from the bloodstream and produce urine

Explanation:

The digestive and excretory systems work together to get the nutrients needed from food and then release waste products.

What is the entropy of this collection of training examples with respect to the positive class B. What are the information gains of A1 and A2 relative to the training dataset For A3, which is a continuous attribute, compute the information gain for every possible split. C. What is the best split (among A1,A2, and A3) according to the information gain

Answers

The data set is missing in the question. The data set is given in the attachment.

Solution :

a). In the table, there are four positive examples and give number of negative examples.

Therefore,

[tex]$P(+) = \frac{4}{9}$[/tex]   and

[tex]$P(-) = \frac{5}{9}$[/tex]

The entropy of the training examples is given by :

[tex]$ -\frac{4}{9}\log_2\left(\frac{4}{9}\right)-\frac{5}{9}\log_2\left(\frac{5}{9}\right)$[/tex]

= 0.9911

b). For the attribute all the associating increments and the probability are :

  [tex]$a_1$[/tex]   +   -

  T   3    1

  F    1    4

Th entropy for   [tex]$a_1$[/tex]  is given by :

[tex]$\frac{4}{9}[ -\frac{3}{4}\log\left(\frac{3}{4}\right)-\frac{1}{4}\log\left(\frac{1}{4}\right)]+\frac{5}{9}[ -\frac{1}{5}\log\left(\frac{1}{5}\right)-\frac{4}{5}\log\left(\frac{4}{5}\right)]$[/tex]

= 0.7616

Therefore, the information gain for [tex]$a_1$[/tex]  is

  0.9911 - 0.7616 = 0.2294

Similarly for the attribute [tex]$a_2$[/tex]  the associating counts and the probabilities are :

  [tex]$a_2$[/tex]  +   -

  T   2    3

  F   2    2

Th entropy for   [tex]$a_2$[/tex] is given by :

[tex]$\frac{5}{9}[ -\frac{2}{5}\log\left(\frac{2}{5}\right)-\frac{3}{5}\log\left(\frac{3}{5}\right)]+\frac{4}{9}[ -\frac{2}{4}\log\left(\frac{2}{4}\right)-\frac{2}{4}\log\left(\frac{2}{4}\right)]$[/tex]

= 0.9839

Therefore, the information gain for [tex]$a_2$[/tex] is

  0.9911 - 0.9839 = 0.0072

[tex]$a_3$[/tex]     Class label      split point       entropy        Info gain

1.0         +                        2.0            0.8484        0.1427

3.0        -                         3.5            0.9885        0.0026

4.0        +                        4.5            0.9183         0.0728

5.0        -

5.0        -                        5.5            0.9839        0.0072

6.0        +                       6.5             0.9728       0.0183

7.0        +

7.0        -                        7.5             0.8889       0.1022

The best split for [tex]$a_3$[/tex]  observed at split point which is equal to 2.

c). From the table mention in part (b) of the information gain, we can say that [tex]$a_1$[/tex] produces the best split.

The weak base ionization
constant (Kb) for C4H4N2 is
equal to

Answers

Answer:

A

Explanation:

The weak base ionization constant (Kb) for [tex]C_{4} H_{4} N_{2}[/tex] is equal to Option A.

Are weak foundations made of ionized?

A weak foundation is a base that makes ionize only slightly in an aqueous solution. Remember that a foundation can be defined as an object, which receives a hydrogen ion from another object.

What is the kb of a weak foundation?

To obtain an aqueous solution of a weak acid, the dissociation constant is called the acid ionization constant (Ka). Similarly, the constant equilibrium of a weak base reaction with water is the base ionization constant (Kb). In any conjugate acid-base pair, KaKb = Kw.

Learn more about ionization here: brainly.com/question/25676623

#SPJ2

how many mg are in 125ml of
phosphoric acid?

Answers

Answer:

125000mg

Explanation:

1ml = 1000mg

125(1000) = 125000mg

which method is adopted in the seperation of lead chloride from water​

Answers

Explanation:

by dissolving the mixture of lead sulphate and lead chloride in water we can separate the two. after dissolving the mixture on water lead sulphate can be obtained as the solid that 's left behind lead chloride can be recovered by evaporating.

If the solubility of salicylic acid is 77.8 g/L of water at 100oC and 1.4 g/L of water at 10oC, a) calculate the minimum amount (in mL) of boiling water necessary to dissolve 2.0 g of impure salicylic acid for recrystallization. b) If the solution is cooled to room temperature and then to 10oC with an ice/water bath, what is the maximum amount of solid salicylic acid isolated after vacuum filtration

Answers

Answer:

a. 25.7mL are necessaries.

b. 1.964g of salicylic acid can be isolated.

Explanation:

a. As the solubility of salicylicic acid in boiling water is 77.8g/L, to dissolve 2.0g of salicylic acid are necessaries:

2.0g * (1L / 77.8g) = 0.0257L =

25.7mL are necessaries

b. Then, at 10°C the solution just can dissolve 1.4g/L, that is:

0.0257L * (1.4g/L) = 0.036g of salicylic acid are dissolved.

And will precipitate:

2.0g - 0.036g =

1.964g of salicylic acid can be isolated

why are electrical wires covered with plastic coating​

Answers

Answer:

For safety.

Explanation:

Because uncovered wires are conductors, an electric current could damage someone if touched. Plastic and rubber are insulators, meaning that current cannot pass through them.

Why do scientists think that liquid water might have once existed on Mars?

Answers

Answer: The discovery of three buried lakes. Scientists think that a long time ago there were lakes and rivers, etc on Mars. Now of course, you can't see any visible water sources on the surface.

Answer:

Almost all water on Mars today exists as ice, though it also exists in small quantities as vapor in the atmosphere.[5] What was thought to be low-volume liquid brines in shallow Martian soil, also called recurrent slope lineae may be grains of flowing sand and dust slipping downhill to make dark streaks.The only place where water ice is visible at the surface is at the north polar ice cap. Abundant water ice is also present beneath the permanent carbon dioxide ice cap at the Martian south pole and in the shallow subsurface at more temperate conditions. More than 5 million km3 of ice have been detected at or near the surface of Mars, enough to cover the whole planet to a depth of 35 meters. Even more ice is likely to be locked away in the deep subsurface.

Some liquid water may occur transiently on the Martian surface today, but limited to traces of dissolved moisture from the atmosphere and thin films, which are challenging environments for known life. No large standing bodies of liquid water exist on the planet's surface, because the atmospheric pressure there averages just 600 pascals , a figure slightly below the vapor pressure of water at its melting point; under average Martian conditions, pure water on the Martian surface would freeze or, if heated to above the melting point, would sublime to vapor. Before about 3.8 billion years ago, Mars may have had a denser atmosphere and higher surface temperatures, allowing vast amounts of liquid water on the surface, possibly including a large ocean that may have covered one-third of the planet.Water has also apparently flowed across the surface for short periods at various intervals more recently in Mars' history. Aeolis Palus in Gale Crater, explored by the Curiosity rover, is the geological remains of an ancient freshwater lake that could have been a hospitable environment for microbial life.Many lines of evidence indicate that water ice is abundant on Mars and it has played a significant role in the planet's geologic history.The present-day inventory of water on Mars can be estimated from spacecraft images, remote sensing techniques (spectroscopic measurements, radar, etc.), and surface investigations from landers and rovers.Geologic evidence of past water includes enormous outflow channels carved by floods, ancient river valley networks, deltas and lakebeds,and the detection of rocks and minerals on the surface that could only have formed in liquid water. Numerous geomorphic features suggest the presence of ground ice (permafrost)and the movement of ice in glaciers, both in the recent past and present. Gullies and slope lineae along cliffs and crater walls suggest that flowing water continues to shape the surface of Mars, although to a far lesser degree than in the ancient past.Although the surface of Mars was periodically wet and could have been hospitable to microbial life billions of years ago, the current environment at the surface is dry and subfreezing, probably presenting an insurmountable obstacle for living organisms. In addition, Mars lacks a thick atmosphere, ozone layer, and magnetic field, allowing solar and cosmic radiation to strike the surface unimpeded. The damaging effects of ionizing radiation on cellular structure is another one of the prime limiting factors on the survival of life on the surface. Therefore, the best potential locations for discovering life on Mars may be in subsurface environments. Large amounts of underground ice have been found on Mars; the volume of water detected is equivalent to the volume of water in Lake Superior. In 2018, scientists reported the discovery of a subglacial lake on Mars, 1.5 km (0.93 mi) below the southern polar ice cap, with a horizontal extent of about 20 km (12 mi), the first known stable body of liquid water on the planet.Understanding the extent and situation of water on Mars is vital to assess the planet’s potential for harboring life and for providing usable resources for future human exploration. For this reason, "Follow the Water" was the science theme of NASA's Mars Exploration Program (MEP) in the first decade of the 21st century. NASA and ESA missions including 2001 Mars Odyssey, Mars Express, Mars Exploration Rovers (MERs), Mars Reconnaissance Orbiter (MRO), and Mars Phoenix lander have provided information about water's abundance and distribution on Mars.Mars Odyssey, Mars Express, MRO, and Mars Science Lander Curiosity rover are still operating, and discoveries continue to be made.

Determine the number of formula units in 48.0 grams of magnesium chloride (MgCl2)

Answers

Answer:

3.03 x 10²³ formula units

Explanation:

First we convert 48.0 grams of magnesium chloride into moles, using its molar mass:

48.0 g ÷ 95.21 g/mol = 0.504 mol MgCl₂

Then we convert 0.504 moles into formula units, using Avogadro's number:

0.504 mol * 6.023x10²³ formula units/mol = 3.03x10²³ formula units

5. How many grams of Br is needed to make 1000.g of a 2.0ppm solution?

Answers

Answer:

2.0 × 10⁻³ g

Explanation:

Step 1: Given data

Mass of solution: 1000. g (1.000 kg)Concentration of Br₂: 2.0 ppm

Step 2: Calculate the mass of Br₂ required to prepare the solution

The concentration of Br₂ is 2.0 ppm, that is, there are 2.0 mg of Br₂ per kilogram of solution. The mass of Br₂ required to prepare 1.000 kg of solution is:

1.000 kg Solution × 2.0 mg Br₂/1 kg Solution = 2.0 mg

Step 3: Convert the mass to grams

We will use the conversion factor 1 g = 1000 mg.

2.0 mg × 1 g/1000 mg = 2.0 × 10⁻³ g

A balloon is filled
with 35.0 L of
helium when the
temperature is
200K. If the tem-
perature rises to
450K, what is the
new volume of the
balloon?

Answers

Answer:

78.75L

Explanation:

According to Charle's Law:

V1/T1=V2/T2

35/200=V2/450

V2=(35*450)200

V2=78.75L

The Earth's asthenosphere is a structural layer


A.
that is made of the crust and the uppermost part of the mantle.
B.
that is contained completely within the crust.
C.
that is contained completely within the upper mantle.
D.
that is made of the mantle and the uppermost part of the crust.

Answers

Answer:

Dont completly trust me here but i think its a but id try and wait for someone else just be careful

Explanation:

Easy question please help.

Answers

Answer:

1 km an hour

Explanation:

i mean its pretty easy like you said if at 4 hours its traveled 4 km then its going 1 km an hour and at 10 its gone 10 km

At some temperature for the equilibrium PX3(g) + X2(g) # PX5(g) the equilibrium constant is 0.74. At the same temperature the equilibrium constant for PX5(9) + PX3(g) X2(g) is​

Answers

Answer: The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35

Explanation:

Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_c[/tex]  

For the given chemical reaction:

[tex]PX_3(g)+X_2(g)\rightarrow PX_5(g)[/tex]

The expression for [tex]K_c[/tex] is written as:

[tex]K_c=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]

[tex]0.74=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]

For the reverse chemical reaction:

[tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex]

The expression for [tex]K_c'[/tex] is written as:

[tex]K_c'=\frac{[PX_3]^1[X_2]^1}{[PX_5]^1}[/tex]

[tex]K_c'=\frac{1}{K_c}=\frac{1}{0.74}=1.35[/tex]

The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35

If 50.0 g of silicon dioxide is heated with an excess of carbon, 27.9 g of silicon carbide is produced. What is the percent yield of the reaction

Answers

Answer: The percent yield of the reaction is 83.5 %

Explanation:

The given balanced equation is

[tex]SiO_2+3C\rightarrow SiC+2CO[/tex]

[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and [tex]C[/tex] is the excess reagent.

According to stoichiometry :

60.08 g of [tex]SiO_2[/tex] produce = 40.11 of [tex]SiC[/tex]

Thus 50.0 of [tex]SiO_2[/tex] will produce=[tex]\frac{40.11}{60.08}\times 50.0=33.4[/tex]  of [tex]SiC[/tex]

 Experimental yield of SiC = 27.9 g

Percent yield = [tex]\frac{\text {Experimental yield}}{\text {theoretical yield}}\times 100=\frac{27.9g}{33.4g}\times 100=83.5\%[/tex]

Thus  percent yield of the reaction is 83.5 %

The percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.

What is the chemical balance of the equation?

The chemical equations are balanced when the reactants react to form products. The reactants and products react in proper ratios and if they are not in ratio then we balance them by adding the required quantity in the reactants and the products.

The given balanced equation is

[tex]\rm SiO_2+3C---- > SiC+2CO[/tex]

[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and is the excess reagent.

According to stoichiometry

60.08 g [tex]SiO_2[/tex] of  produce = 40.11 of [tex]SiC[/tex]

Thus 50.0 of  [tex]SiO_2[/tex] will produce=  [tex]\dfrac{40.11}{60.08} \times 50=33.4\ SiC[/tex]

The experimental yield of SiC = 27.9 g

The percentage yield will be calculated as

[tex]\rm Percentage \ Yield = \frac{Experimental\ yield}{Theoretical \ yield }\times 100[/tex]

[tex]\rm Percentage \ yield =\dfrac{27.9}{33.49} \times 100=83.5[/tex]

Thus the percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.

To know more about balanced chemical equations follow

https://brainly.com/question/26227625

HELPP PLZ FAST WILL GIVE BRAINLIEST
Benzene, a nonpolar, colorless solute, is most commonly found in oil and is a major component in gasoline.
In which of these two solvents will benzene most likely dissolve?
Solvent
Characteristics
A
Carbon tetrachloride
• Colorless liquid, noncombustible
• Nonpolar
Ethanol
• Flammable, colorless liquid
• Polar
Methanol
• Distinctive odor; volatile, colorless liquid
• Polar
Cyclohexane
• Strong odor; flammable; colorless liquid
• Nonpolar
OA
OB
ОС
OD

Answers

b and d??im pretty sure

Iron has a density of 7.87 g/cm^3. What is the mass of 55.2 cm^3 of iron?

Answers

Answer:  Formula: Mass = (Volume)(Density)

Iron Density = 7.87 g/cm^3

Volume of Iron = 55.2 cm^3

Mass=(V)(D)

Mass= (55.2 cm^3) x (7.87 g/cm^3)

Mass=  434,42 g

Explanation:

Iron has a density of 7.87 g/cm³. 434,42 g is the mass of 55.2 cm³ of iron.

What do you mean by density ?

The term density is defined as the measurement of how closely a material is packed together.

It is also defined as the mass per unit volume. Density Symbol is D or ρ Density Formula is ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.

Density is an important because it allows us to find out what substances will float and what substances will sink when placed in a liquid.

Formula:

Mass = (Volume)(Density)

Given:

Iron Density = 7.87 g/cm³

Volume of Iron = 55.2 cm³

Mass=(V)(D)

Mass= (55.2 cm³) x (7.87 g/cm³)

Mass= 434,42 g

Thus, Iron has a density of 7.87 g/cm³. 434,42 g is the mass of 55.2 cm³ of iron.

To learn more about the density, follow the link;

https://brainly.com/question/29775886

#SPJ2


15. Kinetic and potential energy both relate to
a. friction
a. heat
b. light
d. motion

Answers

Answer:

All forms of energy are either potential or kinetic energy. Potential refers to stored energy while kinetic is energy in motion.

Explanation:

hope help you pls thanks...

D is correct option

D, Motion

All forms of energy are either potential or kinetic energy. Potential refers to stored energy while kinetic is energy in motion.

Element R has three isotopes. The isotopes are present in 0.0825, 0.2671, and 0.6504 relative
abundance. If their masses are 81, 115, and 139 respectively, calculate the atomic mass of element
R. (No decimals).

Answers

The average atomic mass of the element R that has three isotopes is 127.805.

How to calculate average atomic mass?

Average atomic mass is the weighted average of the atomic masses of the naturally occurring isotopes of an element.

The average atomic mass of an element can be calculated by summing up the product of the percent abundance and masses of each isotope as follows;

Average atomic mass of R = (0.0825 × 81) + (0.2671 × 115) + (0.6504 × 139)

Average atomic mass = 6.6825 + 30.7165 + 90.4056 = 127.805

Learn more about average atomic mass at: https://brainly.com/question/13753702

#SPJ1

Calculate the number of grams of Hydrogen required to produce 5.73 grams of water. 2H2+O2--->2H2O 2 grams 0.636 grams 1.2 gram 7.98 grams

Answers

Explanation:

32

2H

2

+O

2

→2H

2

O

Molecular mass of H

2

=2 g/mol

Molecular mass of O

2

=32 g/mol

From the balanced chemical equation,

2×2=4 g of hydrogen requires 32 g of Oxygen to react completely

please help with 1 i would like to see the work please​

Answers

Answer:

D. 0.063 mol

Explanation:

We can calculate the number of moles by using the definition of molarity:

Molarity = moles / liters

As we are given both the molarity and the volume:

0.05 M = moles / 1.25 L

We can calculate the number of moles:

moles = 0.05 M * 1.25 Lmoles = 0.063 mol

Thus the answer is option D.

Identify the substance that has formula mass of 133.5amu.
(a) MgCI
b)SCI
c)BCI
D) AICI​

Answers

The calculated formula masses to 133.5 amu, we find that the substance with a formula mass closest to 133.5 amu is (d) AlCl3. Therefore, the answer is option D.

To identify the substance with a formula mass of 133.5 amu, we need to calculate the formula mass of each given substance and compare it to 133.5 amu.

(a) MgCl2:

The formula mass of MgCl2 can be calculated by adding the atomic masses of magnesium (Mg) and chlorine (Cl).

Mg: atomic mass = 24.31 amu

Cl: atomic mass = 35.45 amu

Formula mass of MgCl2 = (24.31 amu) + 2(35.45 amu) = 95.21 amu

(b) SCl:

The formula mass of SCl can be calculated by adding the atomic masses of sulfur (S) and chlorine (Cl).

S: atomic mass = 32.07 amu

Cl: atomic mass = 35.45 amu

Formula mass of SCl = 32.07 amu + 35.45 amu = 67.52 amu

(c) BCl:

The formula mass of BCl can be calculated by adding the atomic mass of boron (B) and chlorine (Cl).

B: atomic mass = 10.81 amu

Cl: atomic mass = 35.45 amu

Formula mass of BCl = 10.81 amu + 35.45 amu = 46.26 amu

(d) AlCl3:

The formula mass of AlCl3 can be calculated by adding the atomic mass of aluminum (Al) and 3 times the atomic mass of chlorine (Cl).

Al: atomic mass = 26.98 amu

Cl: atomic mass = 35.45 amu

Formula mass of AlCl3 = 26.98 amu + 3(35.45 amu) = 133.78 amu. Option D

For more such questions on masses visit:

https://brainly.com/question/24191825

#SPJ8

Write a mechanism for the conversion of the aldol addition product, 3-hydroxy-3-(4-nitrophenyl)-1-(2-pyridyl)-1-propanone, to the aldol condensation product, (E)-3-(4-nitrophenyl)-1-(2-pyridyl)-1-propenone. Be as complete as possible and show electron flow for all steps.

Answers

Solution :

"Aldol" stands for the abbreviation, aldehyde and alcohol. When a ketone or an aldehyde's enolate reacts with the carbonyl of a  molecule at the alpha carbon, under the acidic or basic conditions so as to obtained the ketone or β-hydroxy aldehyde, is known as an aldol reaction.

For the conversion of the aldol addition product of a 3-hydroxy-3-(4-nitrophenyl)-1-(2-pyridyl)-1-propanone to an aldol condensation product of (E)-3-(4-nitrophenyl)-1-(2-pyridyl)-1-propenone, the mechanism is given in the diagram a below :

You rub a comb on your hair and then the comb is able to pick up pieces of paper. Explain why this happens​

Answers

Answer:

This happened because,the comb was charged with static electricity when it was rubbed on your hair.

(¬_¬)ノ( ˘ ³˘)♥

8. How much heat will be released when
18.6 g of hydrogen reacts with excess O2
according to the following equation?

Answers

Answer:

15 is it

Explanation:

Aqueous solutions containing approximately 3 percent(w/w) H2O2 are sold in drug stores as a disinfectant. Determination of the actual concentration of H2O2 in a bottle of peroxide solution was done by diluting 1.50 mL to 100 mL with water, acidifying with dilute H2SO4 and titrating with a 0.01411 M KMnO4 solution. 32.17 mL of the permangate solution was needed to reach the end point of the titration. What is the actual molar concentration of the H2O2 solution]

Answers

Answer:

0.01804 M KMnO4 Solution.

Explanation:

3 Percent(w/w) H2O2 Are Sold In Drug Stores As A Disinfectant. ... H2O2 In A Bottle Of Peroxide Solution Was Done By Diluting 1.50 ML To 100 ML With Water, Acidifying With Dilute H2SO4 And Titrating With A 0.01804 M KMnO4 Solution.

Other Questions
How can interest rates hurt and benefits us? A= 1/2bh pls help I dont remember how to do this Joey made strawberry jam and raspberry jam. He made enough strawberry jam to fill 1/2 of a jar. If he made 2/5 as much raspberry jam as strawberry jam, how many jars will the raspberry jam fill? On January 1, Hawaiian Specialty Foods purchased equipment for $37,000. Residual value at the end of an estimated four-year service life is expected to be $3,250. The company expects the machine to op the half-life of plutonium-239 is 24,300 years. if a nuclear bomb released 8 kg of this isotope, how many grams of plutonium-239 would be left after 72,900 years? How many zeros appear at the end of 115!? Do not compute 115!.Your argument must come from prime factorizations to receivecredit. There are 180 trees in gardner grove orchard, and 18 of them are pears. What percent of the trees are pear trees? What is the measure of AZB What does the speaker in "We never know how high we are believe about dreaming,A. It is a waste of time.B. It leads to false hopes.C. It enables us to achieve greatness.D. It should be discouraged. Find the first three terms of x[n] using power series expansion if X(z) 2z3 + 13z2 + 7 73 + 722 + 2z + 1 = to remove the5. After the attacks on September 11, 2001 U S. troops were sent to ________ to remove the government.A . Saudi Arabia B . IranC . AfghanistanD . Pakistan Four objects are orbiting a star along the same path the objects are the same distance from the star and have the same massesWhich planet is experiencing the weakest gravitational force What is the probability of spinning a number greater than 4? Q1The sum of the first 68 positive odd integers is ?Q2The degree of recurrence relation an = 2an-2 + 5an-49 is ??Q3In how many ways can an organization containing 19 members elect a president, treasurer and secretary (assuming no person is elected to more than one position)?Q4The Greatest Common Divisor (GCD) of 28 37 58 and 23 33 54 is ?? Use the following information for the year ended December 31, 2022 Supplies $ 1.000 Service revenue $18,000 Other operating expenses 12,000 Cash 15,000 Accounts payable 9,000 Dividends 1,000 Accounts receivable 3,000 Notes payable 1.000 Common stock 9,000 Equipment 13,000 Retained earnings (beginning) 5,000 Calculate the following: (Enter loss using either a negative sign preceding the number eg -45 or parentheses 45 eg. Net income/(net loss) $ _____Ending retained earnings $ ______Total assets ______ Below is the payroll data for Brewings Co. for the payroll period ended on December 18:Gross earnings $3,200.75Deductions:Federal income tax $549.00Social Security tax $484.25Medicare tax $53.21Health insurance premiums $107.00Employee Credit Union Savings Plans $140.00Net amount of payroll $1,867.29The journal entry Brewings Co. will need to make to record the above payroll information includes:a.a credit to Cash for $3,200.75.b.a debit to each individual deduction as an expense for its corresponding amount.c.a debit to Wages and Salaries Expense for $1,867.29.d.a debit to Wages and Salaries Expense for $3,200.75. When members of a species stop reproducing with each other because their sperm and egg do not create viable offspring, this is _______________ reproductive isolation. ILL GIVE BRAINLIEST!! picture also attatched.A. gameteB. temporalC.behavioralD.mechanical Use the binomial series to find a Taylor polynomial of degree 3 for 1 91 +32 T3(0) X + c? + 23 Help please question in the picture is my answer correct?