1) Babies with congenital heart disease and congestive heart failure tend to tire very quickly, making breastfeeding difficult. It is represented by the suck, rest, suck cycle, which is equivalent to dyspnea on exertion in adults. Since the baby cannot suck for a long time and is very tired for some time after sucking, the feeding is not maintained well and the baby does not gain weight and manifests as stunted growth. To do so, you need to feed your child more often. The nurse tells the patient to breastfeed more often, usually every two hours. This ensures that the child is well fed and also allows the child to wake her up every two hours to breastfeed at night. Bottle feeding is done in a similar way.
Breastfeeding is usually 8-12 times a day, and if the child has at least 6-8 wet diapers and is consistently gaining weight, breast milk or bottle feeding should be sufficient. can be assumed to exist.
Do not breastfeed for a long time at a time as this will tire your baby.
When using formula foods, high calorie foods should be used so that children can get more energy with less effort.
2) frequent negative responses.
A 2 year old child usually demands too often for things and they want what they want when they want .
It's also an age when they understand themselves as different individuals. They become less dependent more emotionally labile and may give frequent negative responses.
3) I should limit the use of fingers of broken arm .
Broken arms are splinted so that they get adequate rest to to heal the fracture and wound.
The use of the particular arm have to be reduced.
It is usuall to have a mild swelling of the fingers for initial some days but it should not last for longer.
To know more about congestive heart failure, visit:
https://brainly.com/question/28121370
#SPJ1
I want to know anwser
The wave speed of a wave is equal to its frequency multiplied by its wavelength.
What is wavelength?Wavelength is a measure of the distance between two successive peaks of a wave. It is most commonly associated with light, sound, and other forms of electromagnetic radiation. It is the distance from one peak of the wave to the next, measured in meters. Wavelength is an important factor in determining the properties of a wave, such as its frequency, amplitude, and speed. It is also used to measure the wavelength of sound, radio waves, and other forms of electromagnetic radiation.
Therefore, the wave speed of a 44 Hz wave with a wavelength of 1 m is 44 m/s. This is because frequency is the number of waves passing a certain point in a certain amount of time (measured in hertz or Hz), while wavelength is the distance between two successive wave crests (measured in meters). Thus, when multiplied, these two values give us the wave speed, which is measured in meters per second (m/s).
To learn more about wavelength
https://brainly.com/question/10750459
#SPJ1
A spring scale that reads in grams uses a 10.0-cm-long spring. Hanging a water bottle from the scale stretches the spring to 11.5 cm and causes the scale to read 350 g.
To determine the spring constant of the scale, you can use the formula:
k = (F / x)
where k is the spring constant, F is the force acting on the spring, and x is the displacement of the spring.
In this case, the force acting on the spring is the weight of the water bottle, which can be calculated using the weight = mass * gravitational acceleration formula:
F = m * g
where m is the mass of the water bottle in kilograms and g is the gravitational acceleration of 9.8 m/s^2.
Plugging in the values given, we get:
k = (F / x) = (m * g / x)
= (350 g / (11.5 cm - 10.0 cm))
= 307.8 g/cm
This is the spring constant of the scale. It represents the force required to stretch the spring by 1 centimeter.
the maximum allowed coefficient of performance for a heat pump operating between temperatures of 2 oc and 15 o c is:
A heat pump's operating overall efficiency is just 15.88, claims the inquiry.
What is heat in reality? What is the name of heat energy?Heat energy is created by the movement of tiny atoms, ions, or atoms in solid, liquids, and gases. Overheating can be transferred of one thing to another. When two items are already at varying temperatures from one another, a movement or exchange called heat occurs. Atoms and molecules move more quickly and clash when the temperature rises, producing heat generated (also known as heat energy). The power that comes from the heated object's temperature is referred to as thermal energy.
Briefing:Maximum COP of heat pump:
COP = [tex]T_{H} /T_{H} - T_{C}[/tex]
Here, [tex]T_{H}[/tex] = 271 K and [tex]T_{C}[/tex] = 288 K
Hence, COP = 271/288-271
COP = 15.88
To know more about Heat visit:
https://brainly.com/question/13318585
#SPJ4
What net force would be required to accelerate a 5 Kg object 2 m/s2? [show all work, including the
equation, substitutions with units, and answer with units]
Answer:
10 Newtons.
Explanation:
F=MA
F=(5kg)(2 m/s^2)
10 N
In an orthogonal cutting operation, the rake angle = -5°, chip thickness before the cut = 0.2 mm and width of cut = 4.0 mm. The chip ratio 3 = 0.4. Determine (a) the chip thickness after the cut, (b) shear angle, (c) shear strain.
a. The chip thickness after the cut is 0.5 mm
b. The shear angle is 21.05
c. The shear strain is 3.086
a. the chip thickness after the cutThe formula is
r = t / tc
where we have r = 0.4
t = 0.2
0.4 = 0.2 / tc
cross multiply
tc = 0.5 mm
b. The shear angle is the angle at which a chip will detach from the work piece when cutting metal.
tan ∅ = r cos α / 1 - r sin α
= 0.4 cos (-0.5) / 1 - 0.4 sin(-5)
= 0.385
∅ = tan ⁻¹0.385
∅ = 21.05
c. When a medium is subjected to a lateral force, shear strain results. It is possible to produce a shear force wave that moves perpendicular to the direction of the applied force.
r = cot ∅ + tan(∅ - α)
r = cot (21.05)+ tan(22.05 -(-5)
r = 2.598 + 0.488
= 3.086
Read more on shear strain here: https://brainly.com/question/20630976
#SPJ1
A bowling ball rolls 32 meters in 0.8 seconds. Find the average speed (in m/s) of the bowling ball in m/s
The average speed of the bowling ball 40 meter/second..
What is speed?
The pace at which an object's position changes in any direction is referred to as speed.
The distance travelled in relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity. Si unit of speed be meter/second.
Given parameters:
Distance travelled by the ball: s = 32 meter.
Time taken by the ball: t = 0.8 second.
So, average speed of the ball = distance travelled/ time taken
= 32 meter/ 0.8 second
= 40 meter/second.
Hence, the average speed of the bowling ball 40 meter/second.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
In this circuit, the following values apply:
What is the voltage drop across resistor R 2 in volts
Answer: [tex]8.93 V[/tex]
Explanation: By applying ohm's law, V=IR
for R2 resistance , current flowing through it is [tex]1.9[/tex] ampere,and it's value is [tex]4.7 \ohm[/tex] ohmV=1.9*4.7
=8.93 V
6) Your classmate doesn't want to leave
physics class. You apply a force to drag
him to lunch to the right.
Answer:
Answer: I would apply a force to the right in order to push him in the direction of lunch.
Explanation:
a rc circuit is consutructed with a (intiialy uncharged) 5 uf capactiro and a 5-ohm resistor which are connected in series to an ideal battery with emf 60
a rc circuit is constructed with a (initially uncharged) 5 uf capacitor and a 5-ohm resistor which are connected in series to an ideal battery with emf 60 is Q = CV = 9.5 x 10^-6 x 70 = 6.65 x 10^-4 C
What is constructed?
To create something by combining or arranging various pieces or components: the act of building a bridge. also: invent and contrive. put together a plan. to create a drawing of a geometrical figure using the appropriate tools and under the required circumstances
a) time constant = RC = 16.5 x 10^3 x 9.5 x 10^-6 = 0.157 s
b) V = V0 ( 1- e ^ -(t/RC))
after very long time,
V = V0 = e = 105 V
c) Q = CV = 9.5 x 10^-6 x 105 = 9.97 x 10^-4 C
d) I = I0 ( e^(-t/RC))
I0 = e/R = 105/16.5x10^3 = 6.36 mA
after very long time I = 0
e) I0/3 = I0 ( e^-t/RC)
e^-t/RC = (1/3)
-t/RC = ln(1/3)
t = 1.10 x RC = 0.172 sec
f)) V = 105( 1 - e^(-t/RC))
V = 105 ( 1 - e^(-(0.172/0.157)) )
V = 70 V
Q = CV = 9.5 x 10^-6 x 70 = 6.65 x 10^-4 C
To learn more about circumstances visit
https://brainly.com/question/24180186
#SPJ4
An acorn rolls off a roof and falls to the ground. Which statement best describes the change in energy?
-the acorns potential energy decreases as it’s kinetic energy increases
-the acorns potential energy is changed to mechanical energy
-the acorns potential energy and kinetic energy increase and decrease together
-the acorns kinetic energy increases until it hits the ground
The statement that best describes the change in energy is the acorns potential energy decreases as it’s kinetic energy increases.
option A is the correct answer.
What is law of conservation of energy?The law of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.
Based on the law of conservation of energy, the total mechanical energy of the acorn will be conserved as it rolls off the roof. This implies that the change in the kinetic energy of the acorn is equal to change in potential energy of the acorn.
ΔP.E = ΔK.E
where;
ΔP.E is change in potential energyΔK.E is change in kinetic energyThe potential energy of the acorn is greatest at the maximum height, and decreases as the acorn fall to the ground. As the potential energy of the acorn decreases, it is being converted into kinetic energy and consequently results in increases of the kinetic energy.
Learn more about conservation of energy here: https://brainly.com/question/166559
#SPJ1
Answer:
(Question) A city gets its electricity from a dam, where water is stored in a reservoir. How does the water provide the city with its power?
(Answer) Potential energy in the water becomes kinetic energy as it moves through turbines, which turn kinetic energy into mechanical energy that spins a generator, which changes mechanical energy into electricity.
(Question) An acorn rolls off a roof and falls to the ground. Which statement best describes the change in energy?
(Answer) The acorn’s potential energy decreases as its kinetic energy increases.
(Question) An airplane carries 320 passengers from Phoenix to Los Angeles flying at an average speed of 490 miles per hour. On the return flight, the plane carries 164 passengers and travels at the same average speed. What happens to the plane’s kinetic energy?
(Answer) On the return flight, the plane has less kinetic energy.
(Question) A racehorse is running at 42 miles per hour, equivalent to 18.8 meters per second. The horse and its jockey have a combined mass of 512 kilograms. How much kinetic energy do they have?
(Answer) 90,480.6 J
(Question) Which object has kinetic energy?
(Answer) balloon rising in the sky
(Question) Mr. Starr pushed a cart full of groceries to his car. After emptying the cart, he pushed it back to the store. He pushed the cart at a speed of 2 meters per second each way. Which is the best prediction?
(Answer) When it was empty, the cart had less kinetic energy.
(Question) A student fires a toy rocket into the sky. When does the rocket have the most potential energy?
(Answer) when the rocket reaches its highest point
(Question) What is the best description of one billiard ball hitting a second billiard ball?
(Answer) Most of the kinetic energy in the first ball is transferred to the second ball.
(Question) A roller-coaster car is at the top of a hill. The car and its passengers have a combined mass of 1,088 kilograms. If the hill is 62 meters tall, how much potential energy does the car have?
(Answer) 661,068.8 J
(Question) A roller-coaster is at the top of a 62-meter hill. The car and its passengers have a total mass of 1,088 kilograms. By the time the car reaches the bottom of the hill, its speed is 74 miles per hour (33 meters per second). How much kinetic energy does the car have at the bottom of the hill?
(Answer) 592,416 J
(Question) A diagram is drawn showing a swing set with a swing pulled backward prior to release. The diagram shows how the swing will move forward and then backward after it is initially released. At which point in the diagram is all of the energy gravitational potential energy?
(Answer) when the swing is pulled back prior to release
(Question) essay
(Answer) good luck
(Question) essay
(Answer) good luck
Explanation:
I just completed the assignment.
billiard ball is rolled off of a table onto the floor below in projectile motion. If the speed at which the bowling ball left the table was 12m/s, then what is the x-component of the velocity of the bowling ball at the instant before it strikes the
ground?
The components of velocity v have magnitudes of v x = v cos and v y = v sin, where v seems to be the magnitude of something like the speed and is its direction with respect to the horizontal.
What does velocity vs. speed mean?Velocity, as opposed to speed, refers to the pace and direction of the an object's movement as it moves down a path. In other words, whereas velocity is a vector, speed is a scalar quantity.
How do velocity and acceleration differ?Velocity is the rate at which displacement changes Since it consists both of magnitude and direction, velocity is a vector quantity. Since acceleration is merely the rate at which velocity changes, it too is a vector quantity.
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ1
A model rocket is launched with an initial upward velocity of 125 ft/s. The rocket's height h (in feet) after t seconds is given by the following.
h=125t-16
Find all values of t for which the rocket's height is 71 feet.
Round your answer(s) to the nearest hundredth.
(If there is more than one answer, use the "or" button.)
The values of time (t) = 7.20, 0.62, and the model rocket is launched with an initial upward velocity of 125 ft/s and height of h.
What is Velocity?The directional speed of an object in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.
What is the calculation?height of the rocket is given as,
h = 125t - 16t²
now, when h = 71 then,
71 = 125 t - 16 t²
16 t² - 125t + 71 = 0
Using the quadratic formula, we have:
- (-125) + √ (-125)² - 4 × 16 × 71
t = ____________________
2 × 16
125 + √11081 125 - √11081
t = _________ t = _________
32 32
t = 7.20, t = 0.62
Hence, the values of time (t) = 7.20, 0.62.
To know more about Velocity, check out:
https://brainly.com/question/24681896
#SPJ1
I attached these picture
A roller coaster goes over a 12m tall hill then approaches a 30m hill. What is the minimum velocity the roller coaster would need when going over the 12m hill to make it to the top of the 30m hill?
The minimum velocity the roller coaster would need when going over the 12m hill to make it to the top of the 30m hill is 24.25 m/s.
What is the relationship between kinetic energy and potential energy?The relationship between the kinetic energy and potential energy of a body is given by the law of conservation of energy which states that the sum of the energy in a system is conserved.
Hence, the sum of the kinetic energy and the potential energy of a body is given as follows:
Kinetic energy = Potential Energy
Kinetic energy = ¹/₂ mv²
Potential energy = mgh
where;
m is massv is velocityg is the acceleration due to gravityh is the heightAssuming energy is conserved, the energy when going over the top of the 12 m is equal to the energy required to climb the 30 m hill.
¹/₂ mv² = mgh
v = √ 2gh
v = √ 2 * 9.8 * 30
v = 24.25 m/s
Learn more about kinetic and potential energy at: https://brainly.com/question/26882692
#SPJ1
What is the total electrical energy used by a 1500 watt hair dryer operating for 6.0 minutes?
a 1500 watt hair dryer uses 1500 J every second.
1500 J = 1500 Ws = 1500/3600 Wh = 0.000417 kWh
For more answers, Contact:
https://brainly.com/app/profile/63103549/answers
Raise your hand and hold it flat. Think of the space between your index finger and your middle finger as one slit, and think of the space between middle finger and ring finger as a second slit.(a) Consider the interference resulting from sending coherent visible light perpendicularly through this pair of openings. Calculate the angle between adjacent zones of constructive interference, assuming the width of your middle finger to be 2.7 cm and the wavelength of the light to be 700 nm.(b) To make the angles in the interference pattern easy to measure with a plastic protractor (e.g., for which the angle between the central maximum and the adjacent ones is 15�), you should use an electromagnetic wave with what frequency?HzHow is this wave classified on the electromagnetic spectrum?
Angle and frequency between neighboring zones for constructive interference are both 1.846 * 103⁻³ degrees and 6.44 * 10¹⁰ Hz, respectively.
What exactly is regularity and why is it significant?The quantity of oscillations that pass a given point in one unit of time, as well as the number of passes or oscillations that an object in periodic motion experiences in one unit of time Multiple electrical frequencies cannot coexist without causing device damage, hence keeping a constant electrical rate is crucial. When it comes to supplying power on a national basis, this has important ramifications.
Briefing:a). For Constructive interference;
[tex]$$\begin{aligned}& d \sin \theta=m \lambda \\& \theta=\sin ^{-1}\left(\frac{m \lambda}{d}\right)=\sin ^{-1}\left(\frac{1 \times 580 \times 10^{-9}}{0.018}\right) \\& \theta=1.846 \times 10^{-3} \text { degreees }\end{aligned}$$[/tex]
Angle between nearby constructive interference zones;
[tex]$$\Delta \theta=1.846 \times 10^{-3}-0=1.846 \times 10^{-3} \text { degrees }$$[/tex]
b). [tex]$0.018 \sin 15=1 \times \lambda$[/tex]
[tex]$\lambda=4.66 \mathrm{~mm}$[/tex]
Frequency;
[tex]$$\begin{aligned}& \mathrm{f}=\mathrm{c} / \mathrm{lambda}=\left(3^* 10^8\right) /\left(4.66^* 10^{-3}\right) \\& \mathrm{f}=6.44^* 10^{10} \mathrm{~Hz}\end{aligned}$$[/tex]
To know more about Frequency visit:
https://brainly.com/question/254161
#SPJ4
The complete question is-
Raise your hand and hold it flat. Think of the space between your index finger and your middle finger as one slit, and think of the space between middle finger and ring finger as a second slit.
(a) Consider the interference resulting from sending coherent visible light perpendicularly through this pair of openings. Calculate the angle between adjacent zones of constructive interference, assuming the width of your middle finger to be 2.7 cm and the wavelength of the light to be 700 nm.
(b) To make the angles in the interference pattern easy to measure with a plastic protractor (e.g., for which the angle between the central maximum and the adjacent ones is 15), you should use an electromagnetic wave with what frequency?
Hz
How is this wave classified on the electromagnetic spectrum?
100 POINTS PLS HELP ASAP
FIND THE AVERAGE SPEE FOR BOTH CARS !
Average time for car 1 is 3.01 sec the distance is 4 feet
Average time for car 2 is 2.99 sec the distance is 4feet
PLS HELP
Answer:
4/3 ft/s
Explanation:
(3.01+2.99)/2 = 3.00
(4 ft)/(3.00 s) = 4/3 ft/s
72pts
What is the mechanical advantage of the wheel and axle shown below?
0.8 cm 26 cm
Answer:
Explanation:
The correct answer is A. 32.5
Mechanical advantage is the ratio of force that is input into a machine to the force output.
Mechanical advantage of a wheel and axle is calculated by dividing the radius of the wheel by that of the axle.
MA=R/r where R is the radius of the wheel and r is the radius of the axle.
Substituting for the values in the question gives:
MA=26cm/0.8cm
=32.5
An 3000-kg car traveling at 70 m/s takes 5 m to stop under full braking The same car under similar road conditions, traveling at 140 m/s, takes m to stop under full braking: A) 15 B) 3 C) 10 D) 20 E) 5
It takes 10 minutes to stop.
What happens when brake is applied in car?
To stop the car, force must act in the opposite direction (Newton's First Law). When a car's brakes are applied, the magnitude of the velocity begins to decrease. As a result, the change in velocity is negative, and the acceleration is also negative.
According to the equation,
[tex]v = u + at[/tex]
after applying brake [tex]v = 0[/tex]
[tex]-u = at\\\\a = \frac{-u}{t} \\\\\a = \frac{-70}{5}\\\\a = - 0.234 m/s^2[/tex]
As it is moving at 140m/s
so,
[tex]-u = at\\\\-140 = -0.234 * t\\\\600s = t\\\\t = 10mins[/tex]
It takes 10 minutes to stop.
To know more about car brakes, check out:
https://brainly.com/question/26254970
#SPJ4
What was the speed of a space shuttle that orbited Earth at an altitude of 882 km?
Answer:
Explanation:
Given:
h = 882 km
R = 6371 km
___________
V - ?
Since the height of the orbit is much less than the radius of the Earth, then the acceleration of free fall g = 9.81 m/s²
Speed:
V = √ (g·(R+h)) = √ ( 9.81·(6371+882)·10³ ) ≈ 8 440 m/s or
V = 8.44 km/s
A 1.55-m-tall fisherman stands at the edge of a lake, being watched by a suspicious trout who is 3.50 m from the fisherman in the horizontal direction and 45.0 cm below the surface of the water.
A. At what angle from the vertical does the fish see the top of the fisherman�s head?
The angle from the vertical does the fish see the top of the fishermans head is 42.24 degrees and can be finded out by snells law.
According to Snell’s Law when light is incident on an interface separating two media, the angles of incidence and refraction, θ1 and θ2, are related,
n1 sin(θ1) = n2 sin(θ2)
where θ1 or θ2 is the angle between the normal to the interface and the direction in which incident or refracted wave is propagating. The quantities n1 and n2 are the indices of refraction of the two media.
While the speed of light is constant in a vacuum, the speed of light in air and in transparent solids is somewhat less. The ratio of the speed of light in a vacuum (c) to the speed of light in a solid (v) is called the index of refraction (n) of the solid.
Applying snells law,
nwater *sinα = nair *sinβ
nwater *sinα = sinβ
sinα = sinβ/nwater
sinβ = 1.33 sinα
AB = 3.5m-BC
AB = 3.5m-CDtanβ
AB = 3.5m-1.55*tanβ
Also, AB = 4.5m*tandα
4.5m*tandα = 3.5m-1.55*tanβ
4.5m*tandα = 3.5m-1.55*(sinβ/cosβ)
4.5m*tandα = 3.5m-1.55*1.33sinα/[tex]\sqrt{1-(1.33)^2*(sin\alpha )^2}[/tex]
α=42.24 degrees.
To know more about snells law here
https://brainly.com/question/1278278
#SPJ4
What is pasteurization?
A. A method of creating vaccine invented by Pasteur
B. The use of heat to kill any microorganisms living in a substance
C. The use of radiation to sterilize substances
D. A method of speeding up fermentation
Which of the following is a cause of climate change?
A. A decrease in greenhouse gases in the atmosphere
B. Burning coal to produce electricity
C. Rising sea levels
D. All of the above
After writing Wonderful Life, Stephen Jay Gould was criticized by his follow scientists
A. Because he misinterpreted the Burgess Shale fossil data
B. Because his hypothesis was incorrect.
C. Because they thought he was arguing against natural selection.
D. Because he claimed the Burgess Shale fossils weren't real.
Answer:
1) B. The use of heat to kill any microorganisms living in a substance
2) B. Burning coal to produce electricity
3) A. Because he misinterpreted the Burgess Shale fossil data
A) How high (in m) a hill can a car coast up (engine disengaged) if friction is negligible and its initial speed is 74.0 km/h? (Enter a number.)
B) If, in actuality, a 750 kg car with an initial speed of 74.0 km/h is observed to coast up a hill to a height 10.0 m above its starting point, how much thermal energy (in J) was generated by friction? (Enter a number.)
C) What is the average force of friction (down the slope) if the hill has a slope 2.5° above the horizontal? (Enter your answer in N. Enter a number.)
(a) The maximum height attained by the car is 21.57 m.
(b) The thermal energy generated by friction is 85,017.6 J.
(c) The average force of friction of the hill is 370.8 N.
What is the maximum height reached by the car?
The maximum height attained by the car is calculated by applying the principle of conservation of energy as follows;
P.E = K.E
mgh = ¹/₂mv²
h = (v²) / (2g)
where;
v is the initial speed of the car = 74 km/h = 20.56 m/sg is acceleration due to gravityh = (20.56²) / (2 x 9.8)
h = 21.57 m
The thermal energy generated by friction is determined from the change in the mechanical energy of the car.
ΔE = K.E - P.E
ΔE = ¹/₂mv² - mgh
where;
m is mass of the carh is the height attainedv is the initial velocityΔE = ¹/₂(750)(20.56)² - (750)(9.8)(10)
ΔE = 85,017.6 J
The average force of friction of the hill is calculated as follows;
Fd = ΔE
where;
d is the horizontal distance travelled by the car along the hilld = h/sin(2.5) = 10 m / sin(2.5) = 229.26 m
F(229.26) = 85,017.6
F = (85,017.6) / (229.26)
F = 370.8 N
Learn more about force of friction here: https://brainly.com/question/20241845
#SPJ1
"n 25 kg object is moving at a velocity or 10 ml. the obec has energy. Calculate it.
The energy of 25 kg object is moving at a velocity or 10 ml is 1250J.
What does a 25 kilogram object travelling at 10 m/s kinetic energy look like?KE = 1/2mv²
The mass is m = 25kg
The velocity is v = 10ms⁻¹
KE = 1/2 × 25 × 10²
⇒ KE = 1250J
Hence, Kinetic energy is 1250J
What is Kinetic energy?The energy an object has as a result of motion is known as kinetic energy. A force must be applied to an object in order to accelerate it. We must put in effort in order to apply a force. After the work is finished, energy is transferred to the item, which then moves at a new, constant speed.
What is velocity?The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate.
Know more about energy:
brainly.com/question/13881533
#SPJ1
A 70 kg mountain climber dangling in a crevasse stretches a 50-m-long, 1.0-cm-diameter rope by 8.0 cm. Part A What is Young's modulus for the rope? Express your answer with the appropriate units. HAO ? Value Units
Young's modulus for the rope 5.462 × [tex]10^{9}[/tex]N/m²
Mass is 70 kg
F = mg = 70 × 9.8N
F = 686N
ΔL = 8cm
A = πr² = 0.785 ×[tex]10^{-4}[/tex]
Y = F/A l/Δl = 686 × 50 / 0.785 ×[tex]10^{-4}[/tex] × 8 × [tex]10^{-2}[/tex]
Y = 5.462 × [tex]10^{9}[/tex]N/m²
Young's modulus (displaystyle E), also known as the Young modulus or the modulus of elasticity in tension or compression (i.e., negative tension), is a mechanical characteristic that gauges the stiffness of a solid material under tensile or compressive tension when a force is applied longitudinally. Using the formula, it quantifies the relationship between axial strain and tensile/compressive stress in the linear elastic zone of a material. Axial strain is measured as the proportionate deformation of the relationship between axial strain and tensile/compressive stress. Young's modulus was first introduced by Leonhard Euler in 1727, while being named after the 19th-century British scientist Thomas Young. Giordano Riccati, an Italian physicist, conducted the first experiments in 1782 that utilized the idea of Young's modulus in its current form, 25 years before Young's work.
Learn more about Young's modulus here:
https://brainly.com/question/14458238
#SPJ4
A meridional pattern:A. favors formation of major anticyclones.B. inhibits the formation of major cyclones.C. brings mild weather to most of the country.D. is not typically associated with substantial precipitation.
A meridional pattern favors formation of major anticyclones.
Around a low-pressure area, cyclones are quick inward air circulation. In the Northern and Southern hemispheres, respectively, the air moves counterclockwise and clockwise.Storms that are violent and unfavorable weather frequently accompany cyclones.Cyclos, which in Greek means a snake's coils, is the root of the word cyclone. Henry Paddington came up with the term because tropical storms in the Arabian Sea and Bay of Bengal resemble coiled sea serpents.In order for air to blow outward in the northern hemisphere and in the southern hemisphere, air must circulate from a central area of high pressure towards the periphery.This is how a flowing system becomes circular: blowing winds are redirected from their paths by the Coriolis force to the right in the Northern hemisphere and to the left in the Southern hemisphere.To know about Coriolis force -
https://brainly.com/question/26583295
#SPJ4
During take-off a 6kg model rocket is burning fuel causing its speed to increase at a
rate of 7m/s² despite experiencing a 100N drag. What is the magnitude of the net force on the rocket
The magnitude of the net force on the rocket was found to be 42N
Define magnitude ?
What is magnitude in Physics, is surely an issue of tremendous relevance in science. Magnitude often relates to the quantity or distance. In regard to the movement, we may associate magnitude with the size and speed of the item while moving.
The magnitude of a thing or a quantity is its size. Like in terms of speed, a car is driving quicker than a motorbike. In this situation, the car's speed is greater than the motorbike's. Let's now discuss what magnitude in physics means.
the magnitude of the net force was determined by the equation.
∑F= ma
=6(7m/s²)
=42 N
the force was exerted upwards.
To learn more about magnitude follow the given link:https://brainly.com/question/26700114
#SPJ1
A merry-go-round is a playground ride that consists of a large disk mounted to that it can freely rotate in a horizontal plane. The merry-go-round shown is initially at rest, has a radius R = 1.3 meters, and a mass M = 231 kg. A small boy of mass m = 48 kg runs tangentially to the merry-go-round at a speed of v = 2.5 m/s, and jumps on.
Required the moment of inertia of the merry go round.
a. I = 12 MR2 is the formula for the merry-go-moment round's of inertia.
I = ½ * 231 * (1.3 * 1.3)
I = 195.195 kgm2
b. The boy's angular speed is specified as = v/R = 2.5/1.3 = 1.92 rad/s.
c. I' = I + mR2 is the formula for the merry-go-moment round's of inertia following the boy's jump on it.
I’ = 195.195 + 48 * (1.3 * 1.3)
I’ = 276.315 kg/m2
The conservation of angular momentum principle determines the merry-go-angular round's speed. As a result, I (0) + m R = 'I' and = (48 * 1.92* 1.3) / 276.315 = 0.433 rad/s
To learn more about conservation of angular momentum.
https://brainly.com/question/29718936
#SPJ1
a_____ force can cause a greater change in velocity.
Answer:
A stronger force can cause a greater change in velocity.
Explanation:
Forces affect how objects move. They may cause motion; they may also slow, stop, or change the direction of motion of an object that is already moving. Since force cause changes in the speed or direction of an object, we can say that forces cause changes in velocity. Remember that acceleration is a change in velocity.
Which equation can be used to solve for acceleration?
0 ₁ = AV
a
O vf = at-vi
0 a = 4/1/20
d
O AV =
The best choice is A. The formula that can be used to calculate the acceleration is a= dv/t
The alteration in a body's velocity with respect to time is referred to as acceleration. Using mathematics, t= dv/awhere: dv is the velocity changeThe amount of time usedMaking the formula's subject the time "t": a =dv/tConsequently, t=dv/a is how the equation that can be utilized to solve the acceleration is written.Acceleration: the rate at which the speed and direction of a moving object vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting.For more information on acceleration kindly visit to
https://brainly.com/question/3046924
#SPJ1