20.03atm
4.
A sample of krypton gas occupies 75.0 mL at 0.400 atm. If the temperature remained constant, what
volume would the krypton occupy at 4.00 atm?

Check the nails every day for the development of rust. Both the nails submerged in water should rust after three weeks, while the nail submerged in vinegar should rust after about one week.

Rust is a similar coating created on a metal other than iron by corrosion. It is a reddish brittle coating that forms on iron especially when chemically attacked by damp air and is constituted primarily of hydrated ferric oxide.

Rust is a result of the reaction of iron with both air and water. Rust is a powder that forms from the oxygen in the air. Rusting is the process of rust creation. Rust is a reddish-orange flaky material. The metal surface is where rusting is more prone to happen because it is an oxidation process.

To know more about Rust please click here ; https://brainly.com/question/1477535

#SPJ1

The average atomic mass of silicon has a natural abundance of Si-28 of 92.23% and Si-30 of 3.1%.

Because the amount of protons and electrons in a neutral substance is equal, silicon also contains 14 electrons. 28 - 14 protons equals 14 neutrons since the mass number is equal to the sum of the protons and neutrons.

Unknown. By dividing by 100, convert each percentage of abundance to a decimal. This value should be multiplied by the isotope's atomic mass. Get the average atomic mass for each isotope by adding everything up.

To know more about mass number visit:-

https://brainly.com/question/4408975

#SPJ1

The amount of copper deposited is 0.1778 grams.

The electrolysis reaction for CuSO₄ solution

Copper deposits will occur at the cathode. According to Faraday's law the number of moles of an electron

ne = It ÷ 96,500

ne = (0.450 × 1,200) ÷ 96,500

ne = 540 ÷ 96,500

ne = 5.6 × 10⁻³ mol

The ratio of the coefficients of each element is equal to the ratio of the number of moles.

ne : n Cu = 2 : 1

n Cu = ne ÷ 2

n Cu = (5.6 × 10⁻³) ÷ 2

n Cu = 2.8 × 10⁻³ mol

Calculate the amount of copper

The molar mass for copper = 63.5

m = n × molar mass

m = 2.8 × 10⁻³ × 63.5

m = 0.1778 grams

Learn more about Faraday's law here: https://brainly.com/question/28303095

#SPJ4

One mole or 239.2 g of PbO₂ or 239.2 g gives two moles or 606.5  of lead sulphate. Thus, 23.6 g of lead oxide will give 59.84 g of lead sulphate.

Lead oxide is an ionic compound formed by the ionic bonding between the transition metal lead and oxygen by losing two electrons from lead to oxygen. It reacts with sulphuric acid giving lead sulphate PbSO₄.

As per the given balanced reaction, one mole of lead oxide gives two moles of lead sulphate.

Molar mass of PbO₂ = 239.2 g/mol

Molar mass of  PbSO₄ = 303.27 g/mol

2 moles of  PbSO₄ = 2 × 303.27  = 606.54 g.

Thus, 239.2 g of lead oxide gives 606.54 g of PbSO₄. The mass of PbSO₄ produced from 23.6 g of lead oxide is:

= (23.6 × 606 .54 )/ 239.2 g

= 59.84 g.

Therefore, the mass of PbSO₄ produced from 23.6 g of PbO2 is 59.84 g.

To find more on lead oxide, refer here:

https://brainly.com/question/13264277

#SPJ1

The isomeric ethers with a formula of  C4H10O are three. Isomers do not  share similar chemical or physical properties.

Isomers are compounds that have exactly the same number of atoms, that is, they have exactly the same empirical formula, but differ from each other by the arrangement of atoms.  It is important to be able to recognize isomers because they have different chemical, physical and biological properties.

Structural isomers can be divided into : functional group isomers, chain isomers, and positional isomers.

In chemistry, isomers are molecules or polyatomic ions with identical molecular formulae but distinct arrangements of atoms in space.

To know more about isomers, refer

https://brainly.com/question/2705480

#SPJ4

For 56 g/mol of the compound, change in the internal energy is calculated to be -539 kJ/mol.

Calorimeter is a device that is used to calculate the amount of heat involved in a chemical or physical process.

As, ΔU = Heat of calorimeter + Heat of solution

And we know, Heat = heat capacity * temperature

Given, 0.485 g compound

Then, ΔU  = 3.81  0.285 + 4.184  3000  0.285

so, ΔU = 4.67 kJ

For 56 g/mol,

ΔU =  (energy/ mass) * (moles/1)

ΔU = (4.67/0.485) *56

ΔU = 539 kJ/mol

As there is a rise in temperature in the reaction, therefore the negative sign is given to the internal energy, i.e. -539kJ/mol.

To know more about calorimeter, refer

https://brainly.com/question/2963957

#SPJ4

The pH of the solution in which one normal adult dose aspirin is dissolved is 2.6 .

Given,

mass of aspirin = 640 mg = 0.640 g

volume of water = 6 ounces = 6 × 0.0295735 L = 0.177441 L

molar mass of aspirin = 180.16 g/mol

moles of aspirin = mass / molar mass = 0.00355 mol

The pH of the solution is as follows,

concentration of aspirin = moles of Aspirin / volume of water

= 0.00355 / 0.177441

= 0.021 M

Given that pKa of Aspirin = 3.5

pKa = -logKa

Therefore, Ka = 3.162 × 10⁻⁴

From the Ice table

3.162 × 10⁻⁴ = [x + H⁺]/[aspirin] = [x²]/[0.021 - x]

Given that the value of Ka is small so we will ignore -x

x² = 3.162 × 10⁻⁴ × 0.021

x = 2.576 × 10⁻³

Therefore,

[ H⁺ ] = 2.576 × 10⁻³

given that

pH = - Log [ H⁺ ]

     = - ( -3 + log 2.576 )

     = 2.58 ≈ 2.6

Hence we can conclude that The pH of the solution in which one normal adult dose aspirin is dissolved is 2.6 .

Learn more about pH from the link given below.

https://brainly.com/question/29011841

#SPJ4

It would be challenging to calculate the percentage of simply acetic acid in vinegar if other acids were also present since they would mix with it.

A chemical that creates salts when it combines with specific metals while also releasing hydrogen atoms into water. Acids have a sour taste and give some colors, a reddish tint. Acids generated by the body, such stomach acid, can assist organ function. One type of acid is hydrochloric acid.

For instance, they can be used as an essential component in the chemical industry, like an electrolyte in a wet-cell battery (like a car battery), and to remove rust from metals.

To know about acid visit:

https://brainly.com/question/1512259

#SPJ4

The compound is called cis-3-bromocyclohexanecarboxylic acid. Out of the available possibilities, this is the best decision.

The most significant functional group in C=O is the carboxylic acids. Some carboxylic acids, such citric acid, lactic acid, or fumaric acid, are produced through fermentation; the majority of these types of carboxylic acids are used in the food sector. This class of organic molecules can be obtained through several methods.

Carboxylic acids play a significant role in organic chemistry and are used to create a variety of derivatives, including esters, acid anhydrides, acid chlorides, amides, etc. They are organic substances with one or more carboxyl groups in the molecules of their molecules.

To learn more about carboxylic acid visit:

brainly.com/question/4721247

#SPJ4

To find the original volume of vinegar, we can use the following formula:

Original volume of vinegar = Diluted volume * Dilution factor

In this case, the diluted volume is 100 ml and the dilution factor is 10, so the original volume of vinegar is:

Original volume of vinegar = 100 ml * 10 = 1000 ml

To find the concentration of acetic acid in the diluted solution, we can use the following formula:

Diluted concentration of acetic acid = Original concentration of acetic acid / Dilution factor

In this case, the original concentration of acetic acid is 0.87 mol/L and the dilution factor is 10, so the diluted concentration of acetic acid is:

Diluted concentration of acetic acid = 0.87 mol/L / 10 = 0.087 mol/L

This means that the diluted solution has a concentration of 0.087 mol/L acetic acid.

Please give me brainliest for more high quality answers! - longstretch

A) Molar mass of AgBr,

MM = 1*MM(Ag) + 1*MM(Br)

= 1*107.9 + 1*79.9

= 187.8 g/mol

mass of AgBr = 0.45 g

mol of AgBr = (mass)/(molar mass)

= 0.45/1.878*10^2

= 2.396*10^-3 mol

B) According to balanced equation,

mol of Na2S2O3 formed = (2/1)* moles of AgBr

= (2/1)*2.396*10^-3

= 4.792*10^-3 mol

Answer: 4.79*10^-3 mol

B) Using: number of mol = M(Na2S2O3)*V(Na2S2O3)

4.792*10^-3 mol = 0.02 M * V

V = 0.240 L

V = 240 mL

To know more about Mole concept, visit:

https://brainly.com/question/16488605

#SPJ1

Answer:

Explanation:

it's 109.13 g Ag2S2O3 . i have it when i was in school :)

Answer:

The three isomers of trans-1, 2-dichlorocyclobutane are as follows: The stereoisomers are those compound which differs in configuration. The stereoisomer of trans-1, 2-dichlorocyclobutane is cis-1, 2-dichlorocyclobutane.

If our product includes succinimide, the IR spectra should show a prominent peak at around 1700 cm-1, suggesting an incomplete reaction.

There are several applications for these chemicals. The succinimides ethosuximide, phensuximide, and methsuximide are among the medications used as anticonvulsants. Succinimides are also utilized in a number of test procedures to create covalent connections between peptides or protein chains and polymers.

Succinimides inhibit voltage-dependent calcium leakage in thalamic neurons via acting on calcium T channels. Either the gastrointestinal system (vomiting, nausea, and abdominal discomfort) or the central nervous system are ethosuximide's side effects (lethargy, dizziness, and ataxia).

To know more about Succinimides visit:

https://brainly.com/question/10287370

#SPJ4

The energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.

The dental assistant can respond to this patient's concerns by telling the patient that the amount of radiation coming from the x-ray is minimal and will have no negative effect.

Given,

mass = 54.5 kg

Radiation = 5 μSv

Now

Energy per kg = 5 μSv *10⁻⁶ Sv / 14 Sv * 1 J/Kg/ 1 Sv

Energy per kg = 5 * 10⁻⁶ J/Kg

Then,

Energy per given weight of 54.5 kg

Energy per given weight = (54.5 kg)*(5*10⁻⁶)

Energy per given weight = 272.5 * 10⁻⁶ J

Therefore, energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.

To know more about Dental X-ray, refer: https://brainly.com/question/29157665

#SPJ4

In the following question the number of protons and electrons before it

a)lose electron are proton number= 13 electron =13

b) after losing electrons proton number=10 electron =10

c)the type of ion it becomes is a cation as it has a positive charge on it

What is atomic number?

The number assigned to a chemical element according to its atomic number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei.

In the first scenario before loses electrons the number of protons and electrons in the atom before loses electron is 13, as given atomic number is 13.In second scenario After it loses 3 electrons Number of elctrons in the atom is 10 and number of protons is 13, as protons are present in the nucleus.

Therefore the number of protons is same i.e. 13 within the atom and no. of electrons after losing 3 electrons is 10 and it becomes a cation.

To know more about atomic number from the given link

https://brainly.com/question/11353462

#SPJ4

The molarity of the KCl solution is 4.04 moles/ litre

Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in liters, is the most widely used unit to express solution concentration: liters of solution/moles of solute equals M. One liter of a solution with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute.

The amount of a substance in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.

Molarity = no. of moles/ volume of solution

Volume of KCl solution given is 0.25 L

molarity = 1.01 / 0.25

molarity = 4.04 moles/ litre

TO know more about molarity you may visit the link:

https://brainly.com/question/8732513

#SPJ4

The relative atomic mass of the element is the average value of the hydrogen atom is 1.008 amu.

The mass of the one is the atomic mass. one amu is given as:

1 amu = 1.661 × 10⁻²⁷ kg

the hydrogen atom has the mass of = 1.6736 × 10⁻²⁴ g

The mass of the one twelfth carbon atom is given as :

= 1.661  × 10⁻²⁴ g

the relative atomic mass is given as follows :

Relative atomic mass = mass of the hydrogen atom/mass of 1/12 carbon atom

relative atomic mass = 1.6736 × 10⁻²⁴ g /  1.661  × 10⁻²⁴ g

Relative atomic mass = 1.008 amu

To learn more about relative atomic mass here

https://brainly.com/question/29746366

#SPJ4

Plugging in the given values gives m = 745.3 g.

Specific heat is the quantity of heat required to raise the temperature of a unit mass of a substance by one degree Celsius. It is measured in units of energy per unit mass per degree Celsius (J/ kg-K). The specific heat of a substance is determined by its physical and chemical properties. Typically, substances with higher specific heats require more energy to heat them up, meaning they are more resistant to changes in temperature. For example, water has a higher specific heat than most other substances, and therefore it takes a lot of energy to raise its temperature.

To find the mass of granite needed to store 150,000 J of heat, we need to use the formula for specific heat: q = m * c * ΔT. Rearranging this formula to solve for m gives m = q / (c * ΔT). Plugging in the given values gives m = 150,000 J / (800 J/g x °C * 15.5 °C) = 745.3 g.

To learn more about specific heat
https://brainly.com/question/28490764
#SPJ1

A poor conductor of electricity is pure water. The electric conductivity of regular distilled water is around 10 times when it is in equilibrium with atmospheric carbon dioxide.

On the other hand, it was discovered that different types of water had significantly varying conductivities, which indicate the overall amount of dissolved solids. And as predicted, pure water had the lowest conductivity while carbonated water had the greatest.

When the graphene content is less than 2.0%, it is discovered that electrical conductivity increases with increasing carbonation depth. In this instance, the cement matrix, which can be improved by carbonation product through filling pores, determines the electrical conductivity of the composite.

To know more about electric conductivity visit:-

https://brainly.com/question/5759256

#SPJ4

The student should take the average of the results from all four trials to obtain the highest level of accuracy.

Chemistry's definition of accuracy is how closely a measurement resembles the actual value.

Three categories of accuracy exist:

1) Point accuracy signifies that accuracy is present only at that scale point.

It provides no details regarding the instrument's accuracy.

2)Percentage of true value - The accuracy is assessed by identifying the instrument's accuracy and contrasting it with the true value that was measured.

3)Percentage of scale range – The accuracy is what determines the measurement's accuracy.

Up to 0.5 percent of instrument accuracy is disregarded. By taking multiple measurements and accounting for human error, measurement accuracy can be improved.

To know more about accuracy visit:

https://brainly.com/question/25699176

#SPJ1

Answer:

A

Explanation:

According to the reactivity series, Lithium is more reactive than Zinc therefore, Li + ZnCO₃ reaction will most likely take place. Therefore, option (C) is correct.

The reactivity series or the activity series can be defined as the arrangement of metals or elements in the descending order of their reactivities.

The metals at the top of the reactivity series are powerful reducing agents and can be readily oxidized and easily corrode. The reducing ability of metals becomes weaker while moving down the reactivity series.

Lithium is more reactive than Zn so it can displace Zinc from zinc carbonate therefore, Li + ZnCO₃ reaction will most likely take place. Pt is less reactive than Fe so it can not displace Fe from FeCl₃ therefore, Pt + FeCl₃ reaction will not take place.

Learn more about the reactivity series, here:

brainly.com/question/13960839

#SPJ1

Answer:

c

Explanation:

edge 2023

If you eat the whole package, you would be eating a total of 900 calories.

What is calorie?
Calories are a measure of energy. Two main meanings of "calorie" are frequently used due to historical factors. The amount of heat required to increase the temperature of one kilogramme of water by one degree Celsius was the original definition of the huge calorie, food calorie, as well as kilogramme calorie (or one kelvin). The amount of heat required to produce the same rise in one gramme of water was known as the small calorie or gramme calorie. As a result, 1000 small calories are equal to 1 large calorie. The term "calorie" and the symbol "cal" almost always refer to the large unit in food and nutrition science.

If you eat the whole package, you would be eating a total of 900 calories (3 servings x 300 calories per serving = 900 calories).

To learn more about calorie
https://brainly.com/question/1061571
#SPJ4

If 3.8 g of Cu₃(PO₄)₂(s) was recovered from step 1, the approximate [Cu²⁺ ] in the original solution is 0.3 M

The approximate [Cu²⁺ ] in the original solution can be calculate as follows

first we should calculate the moles of Cu₃(PO₄)₂ by dividing the mass with its molar mass

Moles of Cu₃(PO₄)₂ = mass/ mass molar

Moles Cu₃(PO₄)₂ = 3.8 g /  381 g/mol = 0.1 moles

we know the balance reaction of this reaction is

3Cu²⁺ + 2Na₃PO₄ ⇒ Cu₃(PO₄)₂ + 6 Na⁺

with unitary method we can conclude 3 Cu²⁺ produce 1 Cu₃(PO₄)₂ so we can calculate the 3Cu²⁺

mol Cu²⁺ = 3/1 x mol Cu₃(PO₄)₂

mol Cu²⁺ = 3x 0.1 = 0.3 M

Your question is incomplete but most probably the full question attached below

To learn more about Molar Mass refer to:

brainly.com/question/21334167

#SPJ4

Answer: 42.14 g

Explanation:      calcium nitrate -  [tex]Ca(NO_{3} )_{2}[/tex]

                   , the molar mass of calcium nitrate = 164 g

                   mass required =[tex]0.257*164[/tex]

                                               =[tex]42.14[/tex] g

The water displacement method is a set of measurements used to calculate the volume of an irregularly shaped object. These objects are commonly known as irregularly shaped solids.

The displacement method (also known as the submersion or dunking method) can be used to accurately measure the volume of the human body and other irregularly shaped objects by measuring the volume of fluid displaced when the object is submerged.

Place your jewelry on a table or in your hand, and pour some white vinegar directly on the metal (a dropper can also be used). If the metal of the jewelry changes color, it is not pure gold; if it continues to shine, you have real gold in your hand.

Thus, The water displacement method is a set of measurements used to calculate the volume of an irregularly shaped object.

To learn more about water displacement method, follow the link;

https://brainly.com/question/17342316

#SPJ1

Answer:

B and D

Explanation:

Answer D, look like you're missing (g) which stands for gas

so answer B (which is aq) and answer D (which is g) are correct.

Grams and litters are not used in the chemical equations but used in calculation of the quantities of reactants and products.