Answer:
Forests are renewable
Explanation:
Forests can grow again, but it takes forever to grow a new one so it shouldn't be taken for granted! You can remake a whole new forest, but it will take around 50 years and a lot of animals will die without them before that time comes!
But then again, it could be a non-renewable resources; because it takes so long to grow a new one!
Hope this helps!
How many milliliters of 0.100 M NaOH is needed to titrate 20.0 mL of 0.100 M HNO3 ?
Which term describes something that displays all the characteristics of life?
a.homeostasis
b.organism
c.stimulus
d.unicellular
assuming fixed shape when heated?
Answer:
Assuming that the atmospheric pressure is standard, the temperature will rise steadily until it reaches 100°C
List three forms of energy.
The different types of energy include thermal energy, radiant energy, chemical energy, nuclear energy, electrical energy, motion energy, sound energy, elastic energy and gravitational energy.
you could use any of these.
Answer: Chemical energy is energy stored in the bonds of atoms and molecules. ...
Mechanical energy is energy stored in objects by tension. ...
Nuclear energy is energy stored in the nucleus of an atom—the energy that holds the nucleus together.
Explanation:
what role does the grass play in the food web?
A. Producer B. Primary Consumer C. secondary Consumer D. Decomposer
Answer:
Producer
Explanation:
I took the test :)
2. What organelle in plant cells makes it possible for plants to carry out photosynthesis?
a. cell wall
b. chloroplast
C. lysosome
d. nucleus
You prepare a standard by weighing 10.751 mg of compound X into a 100 mL volumetric flask and making to volume. You further dilute this solution 5 mL to 25 mL. This standard gives an area of 4,374. Your sample is prepared by adding 5 mL of sample solution into a 50 mL flask and making to volume. This gives an area count of 2,582. Calculate the concentration of compound X in the sample - prior to dilution.
Answer:
0.12693 mg/L
Explanation:
First we calculate the concentration of compound X in the standard prior to dilution:
10.751 mg / 100 mL = 0.10751 mg/mLThen we calculate the concentration of compound X in the standard after dilution:
0.10751 mg/mL * 5 mL / 25 mL = 0.021502 mg/LNow we calculate the concentration of compound X in the sample, using the known concentration of standard and the given areas:
2582 * 0.021502 mg/L ÷ 4374 = 0.012693 mg/LFinally we calculate the concentration of X in the sample prior to dilution:
0.012693 mg/L * 50 mL / 5 mL = 0.12693 mg/LTrue/False –Similar to liquids, gases cannot be compressed.
Answer:
False
Explanation:
A liquid has a definite shape and takes on the volume of its container. A gas has both the shape and the volume of its container. The particles in a gas cannot be compressed into a smaller volume. Liquids tend to contract when heated.
Hope this helps
A scientist wants to display the numbers of gallons of fuel that were used up
in a one-hour period by three different types of motors. What type of visual
display should the scientist use?
Help please
Answer:
bar graph
Explanation:
What products will form when potassium is added to cold, liquid water?
A.) no reaction will occur
B.) potassium oxohydride and hydrogen
C.) potassium hydroxide and hydrogen
4.) potassium oxide and hydrogen
Answer:
C
Explanation:
Potassium metal reacts very rapidly with water, which forms Potassium hydroxide (KOH) and hydrogen gas (H2).
Answer:
The answer is C
Explanation:
i took a test on this.
what is bond stability??
Answer:
Bond order is a counting method that gives an idea about numbers of electrons shared between atoms. A species with a higher bond order is more stable. A bond order equal to 2 is a double bond, and a bond order of 3 is a triple bond.
Explanation:
Explain how a neutral paper fragment can be attracted to a charged rod
Answer:
The particles in the neutral paper can shift, causing the paper to become polarized and attracted to the rod.
Explanation:
The neutral paper has an even distribution of its electrons throughout the paper. If a charged rod is brought near the neutral paper, this can cause the electrons in the paper to shift. If the rod is negative, the electrons will be repelled from the rod and cause the molecules in the paper to have a slight positive charge on the part of the paper closest to the rod. If the rod is positive, the electrons will be attracted to the rod and cause a slight negative charge on the side of the paper closest to the rod.
If 5.32 mols N2 and 15.8 mols H2 react together, what mass NH3 can be
produced? Which is the limiting reactant?
Answer:
2.87 gram
N2 is the limiting agent
Explanation:
We will find out if there is sufficient N2 and h2 to produce NH3
a) For 2.36 grams of N2
Molar mass of N2 = 28.02
Number of moles of N2 in 2.36 grams = 2.36/28.02
Mass of NH3 = 17.034 g
Now NH3 produced form 2.36 grams of N2 =
2.36/28.02 * 2 * 17.034 = 2.87 g NH3
b) For 1.52 g of H2
NH3 produced = 1.52/2.016 * (2/3) * 17.034 = 8.56
N2 Is not enough to produce 2.87 g of NH3 and also H2 is not enough to make 8.56 g of NH3.
N2 is the limiting agent as it has smaller product mass
The change in time for the first quarter is
seconds.
The change in time for the second quarte 1.39
seconds.
2.07
The change in time for the third quarter is
2.18
seconds.
The change in time for the fourth quarter is
second
Answer: The change in time for the first quarter is 1.39 seconds.
The change in time for the second quarter is 0.78 seconds.
The change in time for the third quarter is 0.64 seconds.
The change in time for the fourth quarter is 0.54 seconds.
Explanation: took info from my data and completed lab
Step 5: Measure the Speed of the Toy Car on the Higher Track
Calculate the change in time for each quarter of the track. Record the change in time in Table E of your Student Guide.
Also added the other calculations -
Calculate the average time the car took to reach each checkpoint. Record the average time in Table D of your Student Guide.
The average time to the first quarter checkpoint is 1.39 seconds.
The average time to the second quarter checkpoint is 2.18 seconds.
The average time to the third quarter checkpoint is 2.82 seconds.
The average time to the finish line is 3.36 seconds.
Calculate the speed of the car at each checkpoint by dividing the distance between each checkpoint, in meters, by the change in time. Record your answers in Table E of your Student Guide.
The speed at the first quarter checkpoint is 1.09 m/s.
The speed at the second quarter checkpoint is 1.95 m/s.
The speed at the third quarter checkpoint is 2.37 m/s.
The speed at the finish line is 2.80 m/s.
Please make me Brainly..:)
How do you balance: Al+Fe3O4=Al2O3+Fe ?
Answer:
8Al+3Fe3O4=4Al2O3+9Fe
Answer:
8Al + 3Fe3O4 → 4Al2O3 + 9Fe
Explanation:
which is the most fluorescent molecule?
I a doing an exam in science pls help.
What type of energy comes from the motion of tiny particles of matter?
Answer:
heat
Explanation:
Answer:
Thermal Energy
Explanation:
The solubility of a solid in a liquid generally increases with increase temperature.
True
Or
False
Answer:
False, Solubility increases with temperature for most solids.
Explanation:
Select the valid ways to make an ammonia/ammonium buffer for use in the laboratory. Mix equal volumes of 1 M NH3 and 0.01 M NH 4. Mix some volume of 1 M NH3 with half as much 1 M HCl. Mix equal volumes of 1 M NH3 and 1 M NH 4. Mix equal volumes of 1 M NH3 and 1 M HCl.
Answer:
The answer is "Option b and Option c".
Explanation:
This buffer is a buffer of ammonia and ammonium ion. Thus it requires the solution [tex]NH_3 \ \ and \ \ NH_4^{+}[/tex].
In point 1:
The solution containing [tex]NH_3 \ \ and \ \ NH_4^{+}[/tex] at 1M concentration would be given by mixing the two solutions. Thus, this buffer is a legitimate route.
In point 2:
It gives the ions you want but they are not the same.
In point 3:
[tex]1 M[/tex] [tex]NH_3[/tex] and [tex]1 M[/tex][tex]HCl[/tex] volume would not produce the same [tex]NH_3 \ \ and \ \ NH_4^{+}[/tex] concentrations. Therefore, this buffer isn't a valid route.
In point 4:
Some [tex]1 M[/tex] [tex]NH_3[/tex] volume and half [tex]HCl[/tex] . This offers the same rate as half.
The speed of an electron is 1.68*10^8m/s what is the wavelength
Answer:
[tex]\lambda =4.33x10^{-12}m=4.33pm[/tex]
Explanation:
Hello there!
In this case, since the speed, wavelength and mass of an electron are related via the the Broglie wavelength:
[tex]\lambda =\frac{h}{m*v}[/tex]
Thus, by plugging in the mass of the electron and the Planck's constant, we obtain the following wavelength:
[tex]\lambda =\frac{6.626x10^{-34}J*s}{9.11x10^{-31}kg*1.68x10^{8}m/s}\\\\\lambda =4.33x10^{-12}m=4.33pm[/tex]
Best regards!
all metals rust please answer false or true
Answer:
True
Explanation:
All metals do rust but at different rates. Gold, platinum, and silver can rust if but at different rates. It can take time for it to rust, if you clean your metals, it won't rust, it'll take awhile before it rusts if you keep cleaning them.
Hopefully this helps :3 sorry if wrong :( plz mark brainiest if correct :D your bootiful/handsome! Have a great day luv <3
-Bee~
What mass of nitrogen (N2) is needed to produce 0.125 mol of ammonia (NH3)? Input a numerical answer only. N2 + 3H2 ---> 2NH:
Please help me
Pls someone help me with this question pls
Answer:
it c
Explanation:
because it's supposed to be untangled so nothing will happen to it because if it's Tangled bad stuff what happened to it and it will broke
1. What organ system is responsible for controlling all of the body
functions?
Answer:
The human brain is the body's control center, receiving and sending signals to other organs through the nervous system and through secreted hormones. It is responsible for our thoughts, feelings, memory storage and general perception of the world. The human heart is a responsible for pumping blood throughout our body
Options:
1. Unsaturated fat or saturated fat
2. Fatty acids, carbohydrates, sterols, or phospholipids
3. Fatty acids, carbohydrates, or triglycerides
Answer:
saturated fats
Explanation:
bcoz it is solid at room temperature and does not have double bonds between carbons
What are the benefits of Fluoride?
Answer:
The benefits of Fluoride are rebuild (remineralize) weakened tooth enamel.slow down the loss of minerals from tooth enamel.reverse early signs of tooth decay.prevent the growth of harmful oral bacteria
Answer:
Fluoride is often called nature's cavity fighter and for good reason. Fluoride, a naturally-occurring mineral, helps prevent cavities in children and adults by making the outer surface of your teeth (enamel) more resistant to the acid attacks that cause tooth decay.
Help me I'm desperate :( no links or u will be reported
Answer:
Here is the answer from somewhere in the internet
I need help with level 15 in covalent bonding in playmada collisions app.
which level are u on now?
what are the reasons that you cannot see many stars in the city nights?
Answer:
Because of the artificial lights influencing the dark night, turning it into a grey.
Question 7 point
What is the name of the covalent compound with the formula P2N3?