Zeke knows that there are several layers of sediment underneath his town. The top layer is soil, the next layer is clay, and the next layer is made up of gravel. He suspects that polluted water from a nearby mine is passing through one of these layers and making it into a local river. What could Zeke do to figure out how the polluted water might be moving from the mine to the river? A. He could build a model of the mine and test how deep it can go before it collapses. B. He could remove water from the mine and test it for certain pollutants. C. He could build a model of the soil layers and test if water passes through any of them. D. He could pour polluted water on the ground and test how long it takes for it to reach the river.

Answers

Answer 1

Answer:

He could add a model of soil layers.

Explanation: C

Answer 2

In an ecosystem where water from mine is polluting river it can be tested by building a model of the soil layers and test if water passes through any of them.

What is an ecosystem?

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/13979184

#SPJ2


Related Questions

Which of these would be found in a wetland?
Mrs. Cornell and vultures
Cattails and salamanders
Maple trees and cats
Oak trees and squirrels

Answers

Answer:

jwjsjdjdhdvjeiejjrjrje

How is oxide different from a neutral oxygen atom

Answers

Answer: The main difference between oxide and oxygen is that oxide is a chemical compound with at least one oxygen atom while oxygen is an element whose atomic number is 8.

Explanation: let me know if it was right or wrong

92.12 kJ of heat is required to convert 58.40 g of gold from liquid to gas phase. What is the heat of vaporization of gold in J/g?

Answers

Answer:

The heat of vaporization of the gold sample is 1577.397 joules per gram.

Explanation:

The latent heat of vaporization of gold ([tex]h_{v}[/tex]), in kilojoules per gram, is the heat required by a unit mass of gold to transform the material from liquid to gas:

[tex]h_{v} = \frac{E}{m}[/tex] (1)

Where:

[tex]E[/tex] - Energy required for vaporization, in joules.

[tex]m[/tex] - Mass, in grams.

If we know that [tex]E = 92120\,J[/tex] and [tex]m = 58.40\,g[/tex], then the heat of vaporization of the gold sample is:

[tex]h_{v} = \frac{E}{m}[/tex]

[tex]h_{v} = 1577.397\,\frac{J}{g}[/tex]

The heat of vaporization of the gold sample is 1577.397 joules per gram.

WHAT IT IZ BRAINLY anyways I got a question for y’all do you think someone can forget who they rlly loved ? Can you ever forget who you really loved ? I’m tryna prove sum

Answers

Answer:

Its a 50% chance of it happeing

Explanation:

When we celebrate a new year we are really celebrating what?

Answers

We are celebrating a fresh start to another year

What is the proper disposal of all chemicals in this reaction? Briefly explain any hazards associated with barium nitrate and silver nitrate

Answers

Barium nitrate is toxic if ingested or inhaled, while silver nitrate is corrosive and can cause severe skin and eye irritation.

What are the potential hazards associated with barium nitrate and silver nitrate, and how should they be properly disposed of?


Barium nitrate is toxic if ingested or inhaled, posing risks to the respiratory, cardiovascular, and nervous systems. It can also harm aquatic life if released into water bodies. Silver nitrate is corrosive and can cause severe irritation and burns to the skin and eyes. To properly dispose of these chemicals, consult local waste management authorities for specific guidelines. Follow any recommended neutralization procedures, use suitable containers for storage, and label them clearly with the contents and hazards. Engage a licensed waste disposal company or hazardous waste facility to ensure proper collection and disposal. Adhering to local regulations and best practices is crucial to minimize the environmental and health risks associated with these chemicals.

Learn more about Silver Nitrate,Click on the link below:
https://brainly.com/question/5764610

#SPJ4


In the following molecules, the primary intermolecular attractive force is

Answers

Answer:

Dipole-dipole

Explanation:

enzymes act as catalysts because they: group of answer choices decrease the enthalpy of the products. increase the entropy of the products.

Answers

Enzymes act as catalysts because they decrease the activation energy required to initiate a chemical reaction.

Why enzymes are considered as catalysts?

Enzymes are molecules that accelerate chemical reactions by lowering the energy barrier (activation energy) for the transition state of the reaction. Enzymes bind to substrates, which are the reactants of the reaction.

The binding of the substrate to the enzyme lowers the energy required to transition the reactants to the transition state. This results in the lowering of activation energy that is required for a reaction to proceed

Learn more about enzymes at:

https://brainly.com/question/32026440

#SPJ11

Which of these objects is made of cells?
A. rocks B. snow C. trees D. water

Answers

Answer:

I think it's trees

Explanation:

I'm not 100% sure tho

a 900 w carbon-dioxide laser emits light with a wavelength of 10μm into a 3.0-mm-diameter laser beam.

Answers

The 900 W carbon-dioxide laser emits light with a wavelength of 10 μm into a 3.0 mm diameter laser beam. This means that the laser is producing a high-power output in the infrared region of the electromagnetic spectrum.

The wavelength of 10 μm corresponds to the mid-infrared range, which is commonly used in various applications such as industrial cutting and welding, medical procedures, and scientific research.

The 3.0 mm diameter laser beam represents the spatial profile of the laser output. It indicates that the laser beam has a relatively small cross-sectional area, allowing for focused and concentrated energy delivery.

The combination of a high-power output and a specific wavelength allows the carbon-dioxide laser to efficiently perform tasks that require precision and controlled energy deposition, making it suitable for a wide range of industrial and scientific applications.

To know more about electromagnetic spectrum, refer here:

https://brainly.com/question/23727978#

#SPJ11

How are organisms classified as Eukarya different from organisms classified as Archaea and Bacteria?

A)They are all multicellular.
B)They all produce their own food.
C) They all reproduce sexually.
D) They all have membrane-bound nuclei

Answers

Answer: D

Explanation: The Eukarya differ from the Archea and Bacteria in that their cells are eukaryotic, meaning they contain a membrane enclosed nucleus and other membrane enclosed organelles.

Eukarya is different from organisms classified as Archaea and Bacteria because Eukarya have membrane-bound nuclei. Therefore, option (D) is correct.

How does the classification of Eukarya differ from Archaea?

The type of cell of the organism can be classified into three domains. First is the bacteria which have no nucleus present in cells. Then Archaea have no nucleus in the cells but they have a different cell wall than bacteria. Then Eukarya have a nucleus in them.

The domains of Archaea and Bacteria are both composed entirely of small, single-celled organisms but they also have differences. All are composed of prokaryotic cells, which are nucleus-less cells.  T

All the cells in the Eukarya domain contain their genetic material or DNA within the nucleus. Four classes make up the Eukarya domain: Plantae, Fungi, Animalia, and Protista.

Therefore, the domain of the Eukarya is different from organisms classified as Archaea and Bacteria as Eukarya have membrane-bound nuclei.

Learn more about Eukarya, here:

https://brainly.com/question/1116319

#SPJ6

A 0.330 gram sample of an unknown, monoprotic acid (the molar ratio between acid and base is 1-to-1) was dissolved in 50.0 mL of water and titrated to equivalence point with 22.00 mL of 0.150 M NaOH. Determine the molar mass of the the unknown aci

Answers

The molar mass of the unknown monoprotic acid will be approximately 100 g/mol.

To determine the molar mass of unknown monoprotic acid, we will use the concept of stoichiometry.

First, let's calculate the number of moles of NaOH used in the titration:

Moles of NaOH = concentration of NaOH × volume of NaOH used

= 0.150 mol/L × 0.02200 L

= 0.00330 mol

Since the acid and base have a 1-to-1 molar ratio, the number of moles of the unknown acid is also 0.00330 mol.

Next, let's calculate the molar mass of the unknown acid:

Molar mass of the unknown acid = mass of the unknown acid / moles of the unknown acid

We are given the mass of the unknown acid as 0.330 grams and the moles of the unknown acid as 0.00330 mol.

Molar mass = 0.330 g / 0.00330 mol

= 100 g/mol

Therefore, the molar mass is 100 g/mol.

To know more about molar mass here

https://brainly.com/question/12127540

#SPJ4

Identify which properties are common to each of the following chemical families

(a) alkali metals

(b) alkaline earth metals

(c) halogens

(d) noble gases

Answers

The noble gases have a full outer shell of valence electrons, making them stable and unreactive. They are colorless, odorless gases at room temperature and have very low boiling points. Their lack of reactivity makes them useful in a variety of applications, including lighting and welding.

The properties that are common to each of the following chemical families include:

(a) Alkali metals The alkali metals have a single valence electron in their outermost shell, which is easily lost to form an ion with a charge of +1. They are the most reactive metals, reacting with water and air to produce hydrogen gas and an oxide layer, respectively. They are silvery-white and have a soft texture.

(b) Alkaline earth metals The alkaline earth metals have two valence electrons in their outermost shell, which they readily lose to form ions with a charge of +2. They are less reactive than the alkali metals, but they still react with oxygen to form an oxide layer on their surface. They are also silvery-white in color and have a harder texture than the alkali metals.

(c) Halogens The halogens have seven valence electrons in their outermost shell, making them highly reactive nonmetals. They readily form ions with a charge of -1 by gaining an electron. They are diatomic molecules at room temperature and can be found in a variety of colors and states of matter.

(d) Noble gases The noble gases have a full outer shell of valence electrons, making them stable and unreactive. They are colorless, odorless gases at room temperature and have very low boiling points. Their lack of reactivity makes them useful in a variety of applications, including lighting and welding. These properties are common to each of the following chemical families.

To know more about noble gases visit:-

https://brainly.com/question/19024000

#SPJ11

balance
A FeS2 + B O2 → C Fe2O3 + D SO2 *

Answers

Answer:

4FeS2 + 6O2 > 2Fe2O3 + 8SO2

Explanation:

What does the first ionization energy represent?

Answers

I believe it is A. The first option

please help me with these questions, im not understanding :(

Answers

Answer:

this is all the answers i hope you have a good day

Explanation:

may i please have a branlliests

what were the advantages and disadvantages of each measuring device?

Answers

To assess the advantages and disadvantages of different measuring devices, specific devices need to be mentioned. Without specific devices, a comprehensive analysis of their advantages and disadvantages is not possible.

The advantages and disadvantages of measuring devices vary depending on the specific device and its application. Different devices have unique features and limitations that affect their accuracy, precision, ease of use, and suitability for different measurements. For example, consider two commonly used measuring devices: a ruler and a digital caliper. A ruler, while simple and inexpensive, may have limitations in terms of precision and accuracy due to human error in reading the markings. On the other hand, a digital caliper offers higher precision and accuracy, as it provides digital readouts and can measure small distances with greater precision. However, digital calipers may be more expensive and require batteries for operation.

Other factors to consider when evaluating measuring devices include durability, range of measurements, calibration requirements, ease of calibration, portability, and the specific needs of the measurement task at hand. To provide a more detailed analysis, it would be helpful to specify the measuring devices being compared.

Learn more about operation here: https://brainly.com/question/30415374

#SPJ11

Considering the limiting reactant concept, how many moles of C are produced from the reaction of 1.00 mol A and 1.00 mol B?
A(g) + 2 B(g) → 3 C(g)
Please show all work, thank you.

Answers

1.50 mol of C are produced from the reaction of 1.00 mol A and 1.00 mol B.

The balanced chemical equation for the given reaction is A(g) + 2 B(g) → 3 C(g). This equation can be used to determine the number of moles of C produced from the reaction of 1.00 mol A and 1.00 mol B. The limiting reactant concept must be considered to solve this problem.Limiting reactant:The limiting reactant is the reactant that is completely consumed in a chemical reaction. In other words, the reactant that runs out first limits the amount of product that can be formed.To determine the limiting reactant, the stoichiometry of the chemical reaction must be used. This involves using the mole ratios from the balanced chemical equation to determine how much product can be formed from each reactant.Let's calculate the number of moles of C that can be produced from 1.00 mol A:A(g) + 2 B(g) → 3 C(g)Molar ratio of A to C = 1 : 3From the balanced equation, 1 mol of A produces 3 mol of C. Therefore, 1.00 mol A will produce 3.00 mol C.Let's calculate the number of moles of C that can be produced from 1.00 mol B:A(g) + 2 B(g) → 3 C(g)Molar ratio of B to C = 2 : 3From the balanced equation, 2 mol of B produces 3 mol of C. Therefore, 1.00 mol B will produce 1.50 mol C.The actual amount of product that can be formed is limited by the smaller of these two values. In this case, 1.50 mol C is the smaller value, so 1.50 mol C is produced from the reaction of 1.00 mol A and 1.00 mol B.Answer:1.50 mol of C are produced from the reaction of 1.00 mol A and 1.00 mol B.

Learn more about reaction here:

https://brainly.com/question/30464598

#SPJ11

when we drop a feather and a stone at the same time from a height the stone reach the faster than a feather

Answers

Answer:

See explanation

Explanation:

When an a heavy object and a light object are thrown down from the same height, the two objects are expected to hit the ground at the same time since the two objects are both accelerated to the same extent (approximately 10m/s^2) under gravity.

However, due to air resistance, the heavier object reaches the ground first before the lighter object.

Hence, when we drop a feather and a stone at the same time from a height the stone will hit the ground faster than the feather.

compute the equilibrium constant for the spontaneous reaction between sn2 (aq) and fe(s) . express your answer using two significant figures.

Answers

The equilibrium constant for the given reaction is 0.93 (to two significant figures). Hence, the answer is 0.93.

Given, spontaneous reaction between Sn2(aq) and Fe(s) is:Sn2(aq) + Fe(s) → Sn(s) + Fe2+(aq)The standard reduction potentials for Sn2+(aq) and Fe2+(aq) are given as:Sn2+(aq) + 2e- → Sn(s); E°red = -0.14 VFe2+(aq) + 2e- → Fe(s); E°red = -0.44 VThe cell potential (E°cell) for the spontaneous reaction can be calculated using the formula: E°cell = E°reduction at cathode - E°reduction at anodeE°cell = E°red of Fe2+ - E°red of Sn2+E°cell = (-0.44 V) - (-0.14 V)E°cell = -0.3 VThe standard equilibrium constant (K°) can be calculated using the relation: ΔG° = -RTlnK°Here, ΔG° is the change in Gibbs free energy for the reaction, R is the gas constant, and T is the temperature in Kelvin.Assuming T = 298 K, we can use R = 8.314 J/mol*K.ΔG° = -nFE°cellHere, n is the number of electrons transferred in the reaction and F is the Faraday constant (96485 C/mol).n = 2 for the given reaction.ΔG° = -2 * 96485 C/mol * (-0.3 V)ΔG° = 58.32 kJ/molSubstituting the values of R, T, and ΔG° in the equation ΔG° = -RTlnK°, we get:lnK° = -ΔG°/RTlnK° = -(58.32 kJ/mol) / (8.314 J/mol*K * 298 K)lnK° = -0.0737K° = e-lnK°K° = e0.0737K° = 0.93The equilibrium constant for the given reaction is 0.93 (to two significant figures). Hence, the answer is 0.93.

To know more about equilibrium constant visit:

https://brainly.com/question/32113268

#SPJ11

Hydrogen-3 has a half-life of 12.3 years. How many years will it take for 539.3 mg 3^H to decay to 2.1 mg 3^H? time to decay:________________________________________________ years Sodium-24 has a half-life of 14.8 hours. How much of a 563.3 mg sodium-24 sample will remain after 3.7 days? mass remaining:_____________________________________________ mg.

Answers

Approximately 4.41 mg of the sodium-24 sample will remain after 3.7 days.

Part A - Hydrogen-3 decay. The half-life of Hydrogen-3 is 12.3 years, and we have to find the time that would take for 539.3 mg 3^H to decay to 2.1 mg 3^H. Let's use the formula given below and find out how many years it will take. Amount = Initial amount * (1/2)^(Time/half life). Initial amount = 539.3 mg. The amount left = 2.1 mg. Time = ?Half-life = 12.3 years. Amount left/Initial amount = (1/2)^(Time/half-life)2.1/539.3 = (1/2)^(Time/12.3)log(2.1/539.3) = log(1/2)^(Time/12.3)(Time/12.3) = log(539.3/2.1) / log2. Time = 12.3 * log(539.3/2.1) / log2Time = 12.3 * 11.3949 / 0.30103. Time = 466.95 years. Therefore, it would take approximately 466.95 years for 539.3 mg 3^H to decay to 2.1 mg 3^H.

Part B - Sodium-24 decay. The half-life of Sodium-24 is 14.8 hours. Let's find out how much of a 563.3 mg sodium-24 sample will remain after 3.7 days. Initial amount = 563.3 mg. Half-life = 14.8 hours. We need to find the amount left after 3.7 days (88.8 hours). Amount = Initial amount * (1/2)^(Time/half-life). Amount = 563.3 * (1/2)^(88.8/14.8)Amount = 563.3 * (1/2)^6Amount = 4.41 mg. Therefore, approximately 4.41 mg of the sodium-24 sample will remain after 3.7 days.

know more about sodium-24

https://brainly.com/question/12658980

#SPJ11

if 4.10 grams of chromium is heated with 9.30 grams of chlorine what mass of chromium(III) chloride is produced?​

Answers

Answer:

4.1g of Cr will make (317/104) x 4.1 = 12.5g of CrCl3

A combustion reaction is a common reaction used to produce energy. Write a combustion reaction for the combustion of ethanol, C₂H5OH. View Available Hint(s) C,HyOH + 3 Oz → 2 CO, + 3 H,O C₂H5OH(

Answers

Combustion reaction is a common reaction used to produce energy. The reaction that describes the combustion of ethanol, C₂H5OH is as follows:

C₂H5OH + 3O₂ → 2CO₂ + 3H₂O
The energy released by the combustion reaction is used to generate electricity or to power machines and vehicles.

This reaction is a chemical process in which a fuel reacts with oxygen to produce heat and light energy. Ethanol is a colorless liquid with a formula of C₂H₅OH. It is an important biofuel and is commonly used as a fuel additive to gasoline. In the combustion process, ethanol reacts with oxygen to produce carbon dioxide and water vapor.Combustion reactions are exothermic reactions that release energy in the form of heat and light. They are commonly used in engines and power plants to produce energy from fuels. The energy released by the combustion reaction is used to generate electricity or to power machines and vehicles.

To know more about combustion reaction visit:

https://brainly.com/question/14335621

#SPJ11

What is FALSE about nitrogen gas and carbondioxide?

1- Both are compounds

2- Both are gases

3- Elements in both substances are non-metals

4- Both are made up of atoms

Answers

Answer: Both are compounds

Explanation:

[tex]\text{N}_{2}[/tex] is an element, not a compound.

calculate the solubility of mgco3 in water at 25∘c, given the ksp is 4.0 × 10−5.

Answers

The solubility of MgCO3 in water at 25°C, given the Ksp is 4.0 × 10−5 is 2 × 10^-3 M.

The chemical equation of magnesium carbonate is MgCO3.

The solubility of MgCO3 is x.

The Ksp value of MgCO3 is 4.0 × 10^-5.

We have to calculate the solubility of MgCO3 in water at 25°C.

The solubility product of MgCO3 is given as:

Ksp = [Mg2+][CO32-]Ksp = [Mg2+][CO32-] = (x)(x) = x2Ksp = 4.0 × 10^-5=x^2x = √Ksp = √4.0 × 10^-5=2 × 10^-3 M

Therefore, the solubility of MgCO3 in water at 25°C, given the Ksp is 4.0 × 10−5 is 2 × 10^-3 M.

Know more about solubility :

https://brainly.com/question/31493083

#SPJ11

Write a balanced equation for the reaction between chromium metal and hydrochloric acid to form chromium(III) chloride
and a reactive gas.

Answers

Answer: Cr(s) + HCl(aq) ⇒ CrCl3 (aq) + H2(g)

Explanation:

how might using water somethimes require changing its original state?

Answers

When water changes state in the water cycle, the total number of water particles remains the same. The changes of state include melting, sublimation, evaporation, freezing, condensation, and deposition. All changes of state involve the transfer of energy.

the formulas of three important acids and three important bases and describe their uses.

Answers

Answer:

18929eu9sisjwiejwjxjjejxme

2 questions. will give brainliest if i can figure out how

What happens to the electrons of a reducing agent during a reaction?
a.Electrons are gained
b.Electrons are lost
c.Electrons are held
d.Electrons are doubled

When is a substance reduced during an oxidation reduction reaction?
a.After one substance is oxidized
b.Before one substance is oxidized
c.Same time as one substance is being oxidized
d.Only oxidation occurs

Answers

1= b. electrons are lost

2= a. after one substance is oxidized

HELP ME! is iodine solution polar, non-polar, or ionic?

Please don't attach links, i will report you

Answers

Answer:

Since the iodine-iodine bond is a pure covalent bond, iodine is a non-polar molecule. The electronegativity difference between the two Iodine atoms is zero.

does this help???

Other Questions
Suppose an experiment is done with criminals released from prison in a certain state where the recidivism rate is 37%; that is, 37% of criminals return to prison within three years. One hundred random prisoners are made to attend a "boot camp" for two weeks before their release, and it is hoped that "boot camp" will have a good effect. Suppose 32 of those prisoners return to prison within three years. The null hypothesis is that those attending boot camp have a recidivism rate of The weight of one serving of trail mix is 2.5 ounces. How many servings are there in 22.5 ounces of trail mix?9.025.011.556.25 Describe an example of analogous structures. What additional evidence would help you show that these structures are not homologous? Socialists believe that F wealth should be distributed equally to everyone G free enterprise and individual liberty should be protected H the government should protect the rights of the wealthy I government interference would disrupt natural selection list the three types of minerals/rocks that have everyday uses and what they are used for. How would the article be different if the section "Question: What Were The Motivations Of The Women You Studied?" came before the section "Question: How Did They Do It?"AThe article would follow more of a chronological structure, by first explaining what might cause a woman to enlist and then describing the process and experience in later sections.BThe article would follow more of a cause-and-effect structure, by outlining the journey of a woman from her first day as a soldier to her reflections on how the experience had changed her life.CThe article would follow more of a problem-and-solution structure, by first describing the challenges female soldiers faced and then detailing how they were able to solve them in later sections.DThe article would follow more of a compare-and-contrast structure, by providing ways that female soldiers were similar to men and then emphasizing the major differences in their experiences. sorry if its too blurry but i need help with this The manager of the customer service department of an e-commerce company wants to know the average hold time for customers who call the department. The department receives about 850 calls each hour. The following data set shows the hold time, in minutes, for 10 calls picked at random. 2,1,4,5,3,3,7,4,3,2. Calculate the approximate hold time for all customers who call the customer service department. The approximate hold time for all customers who call the customer service department is A 4 minutes. B 3 minutes. cannot be calculated from the given data. d 7 minutes (q4)Find the area of the region bounded by the graphs of and x = y - 4. over the course of an 8 hour day, 3.8x104 c of charge pass through a typical computer (presuming it is in use the entire time). determine the current for such a computer. Please help Thanks besties a steady wind blows a kite due west. the kites height above ground from horizontal position x 0 to x 80 ft is given by y 150 2 1 sx 2 50d2. find the distance trav eled by the kite. Assume that both populations are normally distributed (a) Test whether 4 Hy at the a= 0.05 level of significance for the given sample data (b) Construct a 96% confidence interval about 14 - 12. n Population 1 19 17 3.9 Population 2 19 13.8 4.6 X 10. Moth H12 Detemine the P-value for this hypothesis test. P=0.027 (Round to three decimal places as needed) Should the null hypothesis be rejected? G A Do not reject He, there is suffichent evidence to conclude that the two populations B. Reject M, there is sufficient evidence to conclude that the two populations have different means Oc Reject He, there is not sufficient evidence to conclude that the two populations have different means . Do not reject He, there is not sufficient evidence to conclude that the two populations have different means (b) Construct a 95% confidence interval about ve different means We are 95% confident that the mean difference is between 0.027 and 0.05 (Round to two decimal places as needed, Use ascending order.) Suppose a person is riding a plane 154ft above the ground and drops a box of supplies. The height of the boxis given by the formula:h = -16+2 + 154After how many seconds does the box hit the ground? (round to the nearest hundredth of a second) 3) What template have you chosen to use and why What are three reasons someone would make the difficult trip across the mountains and wilderness? What would have made their trip easier?( PLEASEEEE HELP ME THIS IS SPANISH What is the range for the set of data?A. 4B. 6C. 3.5D. 0I dont want a link, so if you were gonna send one, ignore this instead A relation is said to be in second normal form if the primary key consists of a combination key, and the non key attributes are partially dependent on the primary key.a. Trueb. False Keith owed Art some money, and Art was tired of waiting for Keith to pay him back. Art saw Keith walking down the street and decided to approach him with his aggressive Rottweiler Rox. Art let Rox lunge at Keith, and then asked him, "Are you ready to pay me back the money that you owe me now?" What if Rox the Rottweiler actually bites Keith? Rox recently bit another neighbor and is known for her vicious ways. Art would be liable to Keith for _____. battery negligence assault strict liability