Data that is fragmented is reorganized by Windows' Disk Defragmenter to improve the performance of your disks and devices.
Is disk defragmentation beneficial?Why should you defrag? Defragging your computer can help to address and avoid a variety of issues. If you don’t defrag your hard disk on a regular basis, your computer may operate slowly and/or take a long time to boot up once you turn it on. If your hard disk is too fragmented, your computer may freeze or fail to boot.
Defragmentation reassembles the fragmented fragments of data. As a consequence, data are stored in a continuous way, making it easier for your computer to read the disk and get the files you want, enhancing your PC’s overall performance.
To learn more about disk defragmentation, visit:
brainly.com/question/14940701
#SPJ4
jose recently noticed a virus on his system and that it is using encryption to modify itself. the virus is able to escape detection by signature-based antivirus software. what type of virus has jose discovered
Jose really discovered adware on his device that is using encryption to change itself. Logo antivirus software may fail to detect the infection. The virus is polymorphic.
Describe what an antiviral is.Virus removal software is designed to locate and remove viruses and other harmful material from any laptop or computer. Malicious software, sometimes referred to as malware, is computer software that has the potential to harm both your computers and the data you hold.
Briefing :The primary body of polymorphic viruses is duplicated and kept in an encrypted state by a secondary encryption engine. The virus just exposes basic encrypt routine for potential detection. The virus incorporates its slave into the decryption process, which takes control of the target system and exposes the main body of the infection. it can execute.
To know more about Antivirus visit :
https://brainly.com/question/14313403
#SPJ4
suppose we sample music at a rate of 35 khz and quantize with 16 bits/sample. how many bytes are needed to store a 2-minute song in stereo? express your answer in terms of mb where 1mb
1Mb = 1/8 MB = 0.125 MB bytes are needed to store a 2-minute song in stereo.
How you figure out how many bytes are required to store a sound file?The rule of thumb for MP3 audio is that 2 minute of audio takes up about 2 megabyte.First, we need to compute the bit rate by multiplying the sampling frequency to its bit depth multiplied by the number of channels.Then We multiply the determined bit rate to the length of the recording in seconds. Audio recorded at 192kHz/24-bit takes up 6.5x the file space of audio recorded at 44.1kHz/16-bit.To calculate the file size of an audio file, multiply the bit rate by the audio’s duration in seconds. As a result, we obtain file size numbers in kilobits and megabits.
To learn more about bytes visit to
https://brainly.com/question/12996601
#SPJ4
Suppose you have the following numbers and need them to be written in the two other numbering
systems. Before you could translate them, you would need to identify what numbering system is currently
used. Which numbering systems do the following numbers represent? (4 points)
a) 2C
b) 109
Answer:
Explanation:
a) hexadecimal
because hexadecimal numbers use 0-9 and letters A-F
b) decimal
109 is just a regular number and the standard numbering system that humans use is decimal
What must be integrated into an organization’s enterprise resource management solution to allow it to create and maintain regulatory and compliance information from a centralized location?.
A supply chain management system must be connected with an organization's enterprise resource management solution to develop and maintain regulatory and compliance information from a centralized place.
What is the supply chain management system?Supply chain management (SCM) is the management of the movement of data, commodities, and finances associated with a product or service, from raw material purchase through final product delivery.
Supply chain management enables firms to deliver more rapidly, assure product availability, decrease quality concerns, and easily navigate returns, eventually creating value both inside the organization and for consumers.
Therefore, it is supply chain management system
Learn more about the management system, refer to:
https://brainly.com/question/19551372
#SPJ1
Why does a game need to have an objective? A. so that the player knows the point of the game B. so that the player won’t get dizzy while playing the game C. so that the player can always win the game D. so that the player will never beat the game
Answer:
A. so that the player knows the point of the game
Explanation:
A game needs to have an objective so that the player knows the point of the game. The objective of a game is the goal or purpose of the game. It is the reason why the game exists and what the player is supposed to accomplish.
Having an objective is important because it gives the player a clear understanding of what they are supposed to do in the game. This helps to engage the player and motivate them to play the game. Without an objective, the player may not know what to do or why they are playing the game, which could lead to confusion and lack of interest.
Creating compelling visuals for presentations requires people to learn what new tools? question 15 options:
a. gaming software
b. language translation software
c. design software
d. audio recording software
Creating compelling visuals for presentations requires people to learn new tools such as c: design software.
A presentation is made compelling by adding visuals and graphics that allow a reader to better understand the topic of the presentation. In order to make the presentation to be more compelling, it is required that you learn new tools to design software that enable you to add themes, templates, charts, graphs, shapes, and fonts. All these tools of design software help a presenter to make a presentation more compelling.
You can learn more about presentations at
https://brainly.com/question/24653274
#SPJ4
how is information different from data? a.data provides a basis for action. b.data is less accurate. c.information is raw figures and facts reflecting a single aspect of reality. d.information is data presented in a way or form that has meaning. e.data is more detailed.
The Important Distinctions Between Data and Information,Information puts the facts into context, whereas data simply compiles facts. Information is organized, whereas data is unstructured and raw. Individual and occasionally unrelated data points are included.
What makes data different from information?Although they sound similar, the words "data" and "information" are not the same. Between these elements and their functions, there are minute variations. Information is the organizing and explanation of facts, whereas data is defined as a single fact.In the end, you can use the two parts in tandem to pinpoint and address issues. Explore in greater detail data vs. information in the sections that follow, along with how these components can be used in a business setting.Explore the distinctions between data and information further by looking at these instances of data transformation into insights:The total bill at one particular diner is information. The menu items that are most popular and if the pricing are high enough to cover materials, overhead, and labor can both be learned by collecting and analyzing various bills over a period of time by restaurant owners.To Learn more About Data and Information refer to;
https://brainly.com/question/24429924
#SPJ4
which of the following is true? the authentication header protocol (ah) provides source authentication, data integrity, and confidentiality. the encapsulation security protocol (esp) provides source authentication and data integrity, but not confidentiality. the authentication header protocol (ah) provides source authentication and confidentiality, but not data integrity. the encapsulated security protocol (esp) provides source authentication, data integrity, and confidentiality.
Encapsulated security protocol (ESP) offers data integrity, confidentiality, and source authentication.
A protocol is exactly what?The protocol is a collection of instructions for exchanging data. Each step and method of interaction between a number of computers has a set of rules that apply to it. For networks to transport information, they must abide by certain guidelines.
Which two primary protocols are there?Although there are other protocols in the suite, both TCP & IP are really the two most common. The TCP/IP protocol stack serves as such an intermediate device between the routing & changing fabric and network applications. TCP (Transfer Internet Control message protocol) and IP are the two most significant protocols for information transmission through the Internet (Internet Protocol).
To know more about protocol visit:
https://brainly.com/question/27581708
#SPJ4
What are some of the most common obstacles in video games?
A.
grass and trees
B.
enemies and dangerous items
C.
animals and insects
D.
tsunamis and earthquakes
Answer:
B. enemies and dangerous items
Explanation:
Enemies are characters or creatures that are hostile to the player and try to prevent the player from achieving their objectives. They may attack the player or block their path, requiring the player to defeat them in order to continue. Dangerous items are objects that can harm the player if they come into contact with them. These can include traps, hazards, or weapons that the player must avoid or destroy in order to survive.
Isabella is creating a video game and wants to include a unique mental obstacle. Which of the following should Isabella consider adding to her game? A. a riddle or puzzle B. a wall to jump over C. an enemy with a sword D. dynamite
Answer:
A. a riddle or puzzle
Explanation:
Isabella should consider adding a riddle or puzzle to her game as a unique mental obstacle. Riddles and puzzles are challenges that require players to use their mental abilities to solve them. They can be a fun and engaging way to add an extra level of difficulty to a game.
your manager asked you to set up a secure network connection at a remote site to move over some back ups. what protocol what do you use
The protocol that should be used to establish a secure network connection for backups is SSH.
Secure ShellSSH stands for Secure Shell. SSH is a protocol that allows users to remotely control and modify servers. SSH is commonly used by administrators to manage certain systems or applications remotely. So the admin can enter the computer via the network, then run various commands to modify or manage files from one computer to another.
SSH has several crucial functions for managing data transfer traffic. Specifically, the following are the functions and benefits of SSH:
Securing remote access to SSH-enabled systems or network devices for the user and processing them automatically.SSH will automatically terminate the connection if there is suspicious activity on the connection used. So you can avoid various cyber threats such as IP and DNS spoofing, data manipulation, illegal tracking, and others.Perform automatic and secure file transfers.Launch commands securely on remote devices or systems.Perform secure component management of network infrastructure.Learn more about Secure network connection: https://brainly.com/question/28083478
#SPJ4
an employee complains that a windows pc cannot connect to the internet. a network technician issues the ipconfig command on the pc and is shown an ip address of 169.254.10.3. which two conclusions can be drawn? (choose two.)
The PC is not receiving a valid IP address from the network's DHCP server and that it is using an automatic private IP addressing (APIPA) address.
What is IP address?Each device connected to a computer network that uses the Internet Protocol is given a unique numerical label known as an IP address. In most networks, IP addresses are assigned to devices dynamically by a DHCP (Dynamic Host Configuration Protocol) server, which assigns a unique IP address to each device on the network.If a device is unable to obtain a valid IP address from the DHCP server, it may use an APIPA address instead. APIPA addresses are reserved for use in situations where a device is unable to obtain a valid IP address from the DHCP server, and are in the range of 169.254.0.0 to 169.254.255.255. When a device uses an APIPA address, it means that it is unable to communicate with the DHCP server and may not be able to access the internet or other resources on the network.To learn more about IP address refer :
https://brainly.com/question/14219853
#SPJ4
How has programming changed in the past 50 years?
Answer:
programming has changed in the past 50 years because of the introduction of new languages and the introduction of new technologies.
Visual aids generally make a speaker
Feel more comfortable
More effective in delivering his/her message
Answer:
Visual aids generally make a speaker More effective in delivering his/her message
Explanation:
i hope this helps
The game Just Dance involves players copying the dance moves of the actors in the game. What kind of game mode does Just Dance use?
A.
turn-based game mode
B.
card-based game mode
C.
King of the Hill game mode
D.
movement game mode
Answer:
D. movement game mode
Explanation:
Just Dance uses a movement game mode. In a movement game mode, players are required to use physical movement, such as dancing, to play the game. This type of game mode is often used in games that involve dancing, sports, or other physical activities.
Just Dance is a game that involves players copying the dance moves of the actors in the game. In order to play the game, players need to move their bodies and perform the dance moves that are shown on the screen. This type of gameplay is characteristic of a movement game mode.
37. where a preprinted form contract is used: a) preprinted words in a contract prevail over typed words; b) handwritten words prevail over both preprinted and typed words; c) typed words prevail over both handwritten and preprinted words; d) preprinted words prevail over handwritten words
A preprinted form contract is used in typed words prevail over both handwritten and preprinted words.
What is preprinted form contract ?
A standard form contract, also known as a contract of adhesion, a leonine contract, a take-it-or-leave-it contract, or a boilerplate contract, is an agreement between two parties in which one of the parties sets the terms and conditions and the other party has little or no power to negotiate for more advantageous terms, leaving the other party in a "take it or leave it" position.The possibility of being unconscionable exists even if these contracts are not inherently unlawful. Additionally, ambiguities will be decided contra proferentem, or against the party who drafted the contract language, in the event of a dispute.To learn more preprinted form contract refer to:
https://brainly.com/question/13651174
#SPJ4
[2 marks]
The company found that the lights were turning on too early in the summer, and too late in the
winter. They decided to change the street light design so that they turn on when the light levels
are below a certain value.
Name a suitable input device for this system. Give a reason for your choice.
Input device: ..
Reason:
Answer:
A light sensor, it will detect the light, if there is not enough, the streetlights will have to be turned on.
Explanation:
Answer:
One suitable input device for this system could be a light sensor. The reason for this choice is that the light sensor can measure the ambient light levels and provide input to the system to determine when the street lights should be turned on or off. This allows the system to respond dynamically to changes in the light levels and ensure that the street lights are turned on at the appropriate times.
which function returns the contents of a cell at the intersection of a specified row and column from a range?
The INDEX function extracts a value from a table or range or a reference to a value and returns it.
What is array?
The INDEX function can be applied in one of two ways: See Array form if you wish to return the value of a specific cell or array of cells. The row and column numbers you enter determine how the INDEX array form calculates the value of each element in a range or array. A table or range of cells is called an array. The row number in the array is the one from which a value should be returned.
Column number is necessary if row number is left out. Excel's OFFSET function provides a cell or range of cells that are a specified number of rows and columns away from a starting point.
To learn more about INDEX from given link
brainly.com/question/14297987
#SPJ4
Marisol wants a data structure that is as flexible and controllable as possible. Which of these would be most appropriate?
A. primitive
B. Built-in
C. User-defined
D. String
Answer:
B. Built-in
Explanation:
You can modify built-in data structures like adding elements to an array and removing elements.
However, creating a data structure is more time-consuming such as manually sorting a list instead of using the built-in sort function.
if you refer to an identifier without declaring it, the compiler will generate an error message. true false
Answer:
True, Explanation Declaration can be checked during compile time
Explanation:
How many parameters does the create_frame function take?
The numbers of parameters that the create_frame function accept is one that is at least 127 parameters.
What is the create_frame function parameters?A new frame structure is created via the createFrame() function. A new frame structure is created via the createFrame() function. It adds the header data, including the start delimiter, frame type, Serial ID, Waspmote ID, and sequence number, after clearing the frame buffer. The addSensor() function should be used to add sensor fields to the payload after this function has been called.
Therefore, without more details about the method, I am unable to determine how many parameters the create frame function requires.
Depending on its intended usage and the environment in which it is called, the create frame function may accept any number of parameters. It is impossible to correctly estimate the number of parameters a function requires without more details.
Learn more about function from
https://brainly.com/question/29851234
#SPJ1
Complete the code to create a new file.
aFile = open("stuff.txt", "__")
Answer:
aFile = open("stuff.txt", "w")
bluetooth is the popular name for the 802.15 wireless networking standard, which is useful for creating small __________.
Answer:
personal area networks (PAN)
Explanation:
which of the following is not an acceptable javascript variable name? a. one name b. thefirstname c. name one d. 1name
A number cannot start the sentence. The variable name can be finished off with any letter, number, or underscore. Some characters, including spaces, symbols, and punctuation, are prohibited. Variable names are case sensitive.
What is the purpose of JavaScript?
Programmers all over the world use Javascript to make dynamic and interactive online apps and browsers. With 97.0% of all websites using it as a client-side programming language, JavaScript is the most widely used programming language in the world.
Python versus JavaScript: which is simpler?
You should be aware that JavaScript is more harder to learn than Python if you're trying to decide which computer language to learn initially. Both are dynamically typed, high-level programming languages, and they resemble one another quite a bit.
To know more about JavaScript visit;
https://brainly.com/question/28448181
#SPJ4
New methods for video game operation are still being invented.
A.
True
B.
False
Answer: A
Explanation: True
Which type of server is used to sign in clients that are joined to an active directory domain?.
Domain Controller...
you are the network administrator for a large organization. you need to watch some of the main components on a windows server. these include the memory, cpu, network, and disk. what utility can you use to get a quick overview of these four components? group of answer choices system configuration
B: Resource Monitor is the required utility that can be used to get a quick overview of the memory, CPU, network, and disk.
On Windows Server, the Resource Monitor utility permits you to go in-depth to get insight that the Task Manager cannot display. This utility is can be used to determine how programs have been using computer resources over time.
Based on the given scenario where a network administrator of a large organization needs to overview the four main components, such as the memory, CPU, network, and disk, on a Windows Server, In order to meet this goal, the network administrator will use the utility called Resource Monitor.
"
Complete question:
you are the network administrator for a large organization. you need to watch some of the main components on a windows server. these include the memory, cpu, network, and disk. what utility can you use to get a quick overview of these four components? group of answer choices
A: system configuration
B: Resource Monitor
C: Task Manager
D: None of them
"
You can learn more about Resource Monitor at:
https://brainly.com/question/13175719
#SPJ4
PLS HELP ASAP!!!!
Which (active or passive) do you need to be most concerned with? Why?
Elaborate please, I do not understand what you mean by "active or passive".
what is the code? im stuckk
sum=0
c=0
while(1):
tmp = int(input("Enter a number: "))
sum+=tmp
c+=1
if(sum>200):
print("\nSum:",sum,"\nTotal number entered:",c)
break
else:
continue
Answer:
sum = 0
count = 0
while sum < 200:
number = int(input("Enter a number: "))
sum += number
count += 1
print("\nSum:", sum)
print("Number's Entered:", count)
Explanation:
The while loop will keep running until the sum is greater than 200. The sum will be added to the number that the user inputs and the count will be added by 1. Once the sum is greater than 200, the program will print the sum and the count of how many numbers were entered.
What is the definition of alternative technology?
Answer:
Alternative technology is a term used to refer to technologies that are more environmentally friendly than the functionally equivalent technologies dominant in current practice.
Explanation:
Answer:
Alternative technology, also known as appropriate technology or sustainable technology, refers to technologies that are designed to be environmentally friendly and socially responsible. These technologies often use renewable or reusable resources and are intended to improve the quality of life for individuals and communities without causing harm to the environment. Examples of alternative technology include solar panels, wind turbines, and composting toilets.