Answer:
Explanation:
Start by sifting the marbles out bc they are bigger they will sit in a big sifter
Than with a magnet roll it in what’s left this will pick up all the iron pieces
Than Fill with water and stir this should resolve the sugar which after you sift out the sand you can heat and scrape off beaker and than for a very short time heat up the sand to dry it and not have extra weight from the water
!!!sand only for a few seconds or else it will fly everywhere and if it gets in eye it will sting badly
How is the light emitted by an atom related to its electron configuration?A. Light is produced when an electron moves from a higher to a lower energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.B. Light is produced when an electron moves from a lower to a higher energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.C. Light is produced when a proton moves from a higher to a lower energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.D. Light is produced when a proton moves from a lower to a higher energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.
Answer:
Light is produced when an electron moves from a higher to a lower energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.
Explanation:
According to the Bohr's model of the atom, energy is given out by an atom when an electron moves from a higher to a lower energy level. The energy of the emitted light is equal to the energy difference between the two energy levels.
Hence ;
∆E= E2 - E1
Where;
E2 = energy of the higher energy level
E1 = energy of the lower energy level.
By supplying light of various frequencies and observing the frequency/wavelength of light emitted by a particular atom, its electron configuration can be determined.
Read the scenario, then answer the questions. A 2 kg ball is thrown upward with a velocity of 15 m/s. What is the kinetic energy of the ball as it is being thrown? J What is the potential energy of the ball when it gets to its maximum height just before falling back to the ground? J
Answer:
225 for both answers
Explanation:
The only reason i know this is because i got it wrong. 225
Answer:
225J on both of the questions.
lab report for physical and chemical changes??!
Answer:
[See Below]
Explanation:
✦ Physical Changes:
✧ Is when the form changes, but not the chemicals in that form.
✧ An example of this would be chopping wood. It's still wood but it's a different size now. It's easier to burn it since it's smaller.
✦ Chemical Changes:
✧ Is when the chemicals inside that form change to something else entirely
✧ An example would be an egg, when you cook the egg it can turn into being scrambled or fried. But you can't eat the raw egg until the chemicals change.
~Hope this helps Mate. If you need anything feel free to message me.
Answer:
Here is an example of the full report for this type of lab. Includes data table etc. I would suggest making some changes on wording prior to submission
Explanation:
What’s the symbol of the element that has 8 protons, 9 neutrons, and 8 electrons
Answer:
oxygen
Explanation:
The given isotope has 8 protons and 8 electrons, so the atomic number of the given isotope is 8, which is the atomic number of oxygen.
Please answer ASAP >_<
What does xylem do in a plant?
•transport food
•transport water
•prevent water loss
•perform photosynthesis
Answer:
The correct answer is B. Transport water.
Explanation:
I did this quiz. :)
Xylem transport water. Therefore, the correct option is option B among all the given options. The vascular tissue of plants called xylem.
What is xylem?The vascular tissue of plants called xylem transports water plus dissolving minerals from the roots towards the rest of the plant while also offering structural support. The tracheary components, a collection of specialized, water-conducting cells, make up xylem tissue.
All vascular plants, along with the seedless club mosses, fern, horsetails, all angiosperms (flowering plants), and gymnosperms, include xylem in addition to phloem (tissue that transports glucose from the leaves to the rest of the plant) (plants with seeds unenclosed in an ovary). Xylem transport water.
Therefore, the correct option is option B.
To learn more about xylem, here:
https://brainly.com/question/15918718
#SPJ6
Calculate the volume of a sample of mercury with a density of 14.6 g/mL and a mass of 1.00 g.
The answer is assumed to be in mL. Please include a numeric value only with significant figures
Answer:
hiiiiiiiijsiosoaplq
What is true about all uranium atoms?
They each have the same number of nuclear
particles.
They each have the same number of neutral
particles.
O They each have the same number of neutrons.
They each have the same number of protons.
Answer:
they each have the same number of protons
Answer:they each have the same number of protons
Explanation:
I just took the test
Compare and contrast how are predation and parasitism similar how do they differ
List three different forms of potential energy
Answer:
Types of Potential Energy
Elastic Potential Energy. Anything that can act like a spring or a rubber band can have elastic potential energy. ...
Gravitational Potential Energy. There is a constant attractive force between the Earth and everything surrounding it, due to gravity. ...
Chemical Potential Energy.
(IF THIS HELPED CAN YOU GIVE ME A BRAINYLEST PLEASE?)
I need help on these two questions please!!!
Answer:
5. A. Shape and volume
6. A. Solid to liquid
7. C. Gas
Does standard enthalpy use net ionic equations?a. Trueb. False
Answer:
True
Explanation:
In an ionic reaction, the net ionic equation is used to calculate the standard enthalpy of reaction.
Hence the standard enthalpy of any ionic reaction can be obtained by considering its balanced net ionic reaction equation, hence the answer above.
Can somebody help me please? it’s urgent
Answers:
See attached table
Explanation:
The isotope symbol will have the mass number and chemical symbol. The atomic number will be equal to the number of protons because the atomic number is the number of protons in an atom. The electrons will be equal to the protons because the atom is neutral. The neutrons can be found by subtracting the number of protons from the mass number. The mass number can be found by adding the protons and neutrons. It is also in the name of the isotope.
When a piece of metal mass of 54.52 g is dropped into a graduated cylinder containing 23.44 mL of water, the water level rises to 28.85 mL. What is the density of the metal? Answer in units of g/cm3
Answer:
Density = 10.01 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]Density = \frac{mass}{volume} [/tex]From the question
mass of metal = 54.52 g
Volume of metal = new volume - original volume of water in the cylinder
That's
new volume = 28.85 mL
original volume of water = 23.44 mL
Volume of metal
= 28.85 - 23.44 = 5.41 mL
Next we convert the volume from mL to cm³
1 mL = 1 cm³
5.41 mL = 5.41 cm³
Substitute the values into the above formula and solve
That's
[tex]Density = \frac{54.52}{5 .41} \\ = 10.07763[/tex]We have the final answer as
Density = 10.01 g/cm³Hope this helps you
what is the mass number of an atom or ion with one proton, two neutrons, and one electron?
Answer:
3
Explanation:
mass no.=protons+neutrons
mass no.=1+2=3
Which of the following correctly lists the compounds in order of decreasing acidity?
A) H2O > HCCH > NH3 > CH3CH3
B) HCCH > H2O > NH3 > CH3CH3
C) CH3CH3 > HCCH > NH3 > H2O
D) CH3CH3 > HCCH > H2O > NH3
E) H2O > NH3 > HCCH > CH3CH3
Answer:
A) H2O > HCCH > NH3 > CH3CH3
Explanation:
H2O is known as a neural compound which a pH close to 7.0. This however makes it more acidic due to it having the lowest pH when compared to the others in the option.
The other options however have their acidic strength as follows: HCCH > NH3 > CH3CH3. This explains why the pattern of decreasing acidic strength is H2O > HCCH > NH3 > CH3CH3
Someone pls help me I don’t know this one
Reactants undergo chemical reaction to form products.this chemical equation represents one such reaction.the coefficient for one of the reactants or products is incorrect .which part of the chemical equation is incorrect
Answer:
Explanation:
The part of 10 O2 is wrong.
Explanation:
The correct equation can be written as follows:
2 C 4 H 10 + 13 O 2 → 8 C O 2 + 10 H 2 O
The equation was not balanced before.
For a balanced chemical reaction, the number of atoms before and after the reaction should be the same. This is because matter is neither created not destroyed in a reaction, It changes from one form to another through chemical reactions.
Do molecules break or build from a solid to a liquid?
Answer:
they break
Explanation:
Molecules move more freely when it is a liquid state. To keep it a solid, it will bunch together.
Answer:
I think they break.
Explanation:
They do not build a solid to a liquid
Consider an ion with the symbol X2+ formed from a representative element. (5.2, 5.3)a. What is the group number of the element?b. What is the electron-dot symbol of the element?c. If X is in Period 3, what is the element?d. What is the formula of the compound formed from X and the nitride ion?
Answer:
a) the element belongs to group 2
b) see image attached
c) Magnesium
d) X3N2
Explanation:
Any ion with the formula X^2+ was derived from group 2 elements. The group two element found in period 3 is magnesium alone.
Since the nitride ion has a valency of -3 and X^2+ has a valency of +2 , then a compound formed between X^2+ and the nitride ion will have the formula X3N2.
a. The group number of the element can be determined by knowing the charge of the ion. In the ion X2+ has a charge of 2+. Since representative elements typically form ions with charges equal to their group numbers, we can conclude that the group number of the element X is 2.
b. The electron-dot symbol, also known as Lewis dot symbol, represents the valence electrons of an element. Since X is a representative element in Group 2, it has two valence electrons.
c. If X is in Period 3, it could be one of the elements from Group 2 in that period. The most likely element would be Magnesium (Mg), as it is the representative element in Group 2 of Period 3.
d. The nitride ion has a charge of 3-. To form a neutral compound, the charges of X and the nitride ion must balance out. Since X has a charge of 2+ and the nitride ion has a charge of 3-, we need two X ions to balance the charge of three nitride ions. Therefore, the formula of the compound formed from X and the nitride ion is X3N2.
To learn more bout the element, follow the link:
https://brainly.com/question/30858299
#SPJ6
Calculate the millimoles of solute in 1.88 L of a 0.00713 M NaCN solution. millimoles:
Answer:
13.4 milimoles.
Explanation:
The following data were obtained from the question:
Volume = 1.88 L
Molarity = 0.00713 M
Millimoles of NaCN =?
Next, we shall determine the number of mole NaCN in the solution. This can be obtained as follow:
Molarity = mole /Volume
Volume = 1.88 L
Molarity = 0.00713 M
Mole of NaCN =?
Molarity = mole /Volume
0.00713 = moles of NaCN /1.88
Cross multiply
Mole of NaCN = 0.00713 × 1.88
Mole of NaCN = 0.0134 mole
Finally, we shall convert 0.0134 mole to Millimoles. This can be obtained as follow:
1 mole = 1000 millimoles
Therefore,
0.0134 mole = 0.0134 × 1000
0.0134 mole = 13.4 milimoles
Therefore, the millimoles of the solute, NaCN in the solution is 13.4 milimoles
A physical change is chemically the same after the experiment.
True
False
Answer: True
Explanation:
Select the correct statement about thermochemical equations from the following: Select one:
a. The specific heat capacity of all substances involved in the chemical reaction are listed to the right of the balanced chemical equation.
b. Because the enthalpy change of the reaction depends on the states of matter of the substances, they must be shown for each substance in the equation.
c. Positive values for the enthalpy change of a reaction indicate that the reaction released energy.
d. If the chemical reaction is reversed, then the arithmetic sign of the change in enthalpy stays the same.
Answer:
Because the enthalpy change of the reaction depends on the states of matter of the substances, they must be shown for each substance in the equation.
Explanation:
The enthalpy of a substance depends on the particular state of matter in which it occurs.
Therefore, in a thermo chemical equation, all the states of matters for all the chemical species in the equation must be accurately written so that the thermo chemical equation can be meaningful.
The correct statement about thermochemical equations is the enthalpy
change of the reaction depends on the states of matter of the substances,
they must be shown for each substance in the equation.
Enthalpy is defined as the heat change that occurs in a reaction or the sum
of the internal energy present. It is associated with change in matter and is
dependent on the physical states of the reactants and products.
This is the reason why the physical states such as solid, liquid, gas etc have
to be shown in a thermochemical equation.
Read more about Enthalpy here https://brainly.com/question/5374936
Which would be an adaptation for living in the tundra?
I Need Help Asap
Answer:
Long fur
Explanation:
Long fur is an adaption for the tundra because it is cold and snowy in the tundra, so therefore long fur is an adaption
Answer:
thic long fur that overs you
Explanation:
Convert 75 mL of water to gallons (show work)
Answer:
0.01981 gallons.
Explanation:
In this problem, we need to convert 75 mL of water to gallons.
We know that, 1 gallon = 3785.41 mL
To convert 75 mL to gallons, we must use to the unitary method such that,
1 mL = (1/3785.41) gallon
So,
[tex]75\ mL=75\times \dfrac{1}{3785.41}\\\\=0.01981\ \text{gallons}[/tex]
So, there are 0.01981 gallons in 75 mL of water.
Given that O2 is paramagnetic and has a bond order of 2, and its highest occupied molecular orbital is antibonding, what would be the expected bond orders for O22- and O22
Answer:
Bond order of O22- = 1
Bond order of O22+ = 3
Explanation:
The bond order is given by;
1/2(number of bonding - number of anti bonding electrons).
In O22- , there are ten bonding and eight anti bonding electrons giving a bond order of 1 from; 1/2 (10 - 8) = 1
Similarly, for O22+ , we have ten bonding and four antibonding electrons, hence;
1/2 (10 - 4) = 3
What is kinetic energy? Give an example please.
Kinetic energy is moving energy or the energy of motion.
If an object is moving like a rock rolling down
a mountain, we say the rock has kinetic energy.
Mike rides his motorcycle North at an average velocity of 20 meters/second for 500 seconds, how far did he ride?
Answer:
10000
Explanation:
Answer:10,000 meters
Explanation:20x500=10,000
Two substances, A and B, with the same melting point. How can you determine if they are the same without using any form of spectroscopy? Explain in detail.
Answer:
Simply carry out the mixed melting point procedure
1 here grind the two substances mix them
2.take note of the melting point of the mixture this is P
3 also get the original product from a different source okay this is Q
4.so I the melting point of P = Q then they represent a similar compound
5. But if melting point of P is not equal to Q then one of the compounds is P is acting as an impurity so they are not the same
The compound has been similar or not has been determined with the determination of the shift in the melting point of the mixture of the two compounds.
The melting point can be defined as the temperature of the substance when it has been converted from the solid state to the liquid state.
The two substances were found to have the same melting point. The compounds have been determined whether they are similar or not by the determination of the melting point of the combined mixtures.
The compounds A and B have been mixed together, and the melting point has been determined. The similar compounds in mixing will give the same melting point. While if the compounds are different, there has been a shift in the melting point of the mixture.
Thus, the compound has been similar or not has been determined with the determination of the shift in the melting point of the mixture of the two compounds.
For more information about the melting point, refer to the link:
https://brainly.com/question/25512265
It is possible to make a buffer that functions well near pH 7 using citric acid, which contains only carboxylate groups. Explain. Drag the terms on the left to the appropriate blanks on the right to complete the sentences.a. decreaseb. increasec. repulsionsd. associatese. attractionsf. dissociate1. Successive deprotonations______the (−) charge density on the resulting anion.2.This results in unfavorable electrostatic_____between the carboxylate anions, which reduces the likelihood that a proton would_____.3. It is more favorable for the proton to remain bound to reduce unfavorable charge_______.
Complete Question
it is possible to make a buffer that functions well near pH 7 using citric acid, which contains only carboxylate groups. Explain. Drag the terms on the left to the appropriate blanks on the right to complete the sentences.
Words : decrease, increase, repulsion, associates, attractions, dissociate
1. Successive deprotonations -------------- the (−) charge density on the resulting anion.
2.This results in unfavorable electrostatic --------- between the carboxylate anions, which reduces the likelihood that a proton would ----------
3.it is more favorable for the proton to remain bound to reduce unfavorable charge----------- . .
Answer:
1
Successive deprotonations increase the (−) charge density on the resulting anion.
2
This results in unfavorable electrostatic repulsion between the carboxylate anions, which reduces the likelihood that a proton would dissociate
3
It is more favorable for the proton to remain bound to reduce unfavorable charge repulsion
Explanation:
Generally
Successive deprotonations decrease the (−) charge density on the resulting anion.
This because deprotonations means removal of positive charge
This results in unfavorable electrostatic repulsion between the carboxylate anions, which reduces the likelihood that a proton would dissociate
It is more favorable for the proton to remain bound to reduce unfavorable charge repulsion
How you could use the scientific method to learn whether water really does take longer to boil if you are watching it.
Answer:
Please find the detailed explanation below
Explanation:
A scientific method is a sequence of steps that is used to solve a problem. Every scientific method begins with a problem that needs to be solved.
Hence, in order to determine whether water really does take longer to boil if you are watching it, we employ the steps involved in a scientific method.
1) Ask a question/Make observation: This must initiate the process. The observation/question made here is that DOES WATER TAKE LONGER TIME TO BOIL WHEN WATCHED?
2. Formulating hypothesis; an hypothesis is a testable prediction of a possible solution to the stated problem. In this case, an hypothesis could read: IF water is watched while boiling, THEN it will take a longer time to boil. A hypothesis must be tested for it to be proved or disproved.
3. Test hypothesis: The formulated hypothesis is tested via conducting an experiment. The set up of the experiment can involve one group where water is boiled while watching it and another where water is boiled without watching. The former group is called Experimental group, while the latter group is called Control group. The time it takes for each group of water to boil will be recorded.
The independent variable (manipulated variable) will be the WATCHING, while the dependent variable (tested/responding variable) will be the TIME IT TAKES FOR WATER TO BOIL
4. Analyse the data; the data refers to the recorded time for each group of water. This will be analysed and compared.
5. Make conclusion; the conclusion depends on the result, which is the recorded time for each group of boiled water. Based on the result, the hypothesis can either be rejected or accepted. For example, if the control group boils faster than the experimental group, our hypothesis will be accepted but if otherwise, the hypothesis will be rejected.
Therefore, via the scientific method, it can be determined if it really takes longer time for water to boil while watched.