ht
Which of the following is an equivalent expression to the expressione,
А
B
D
ANSWER QUICK PLZ
The graph of which function(s) will contain the point (4, 12)?
y = x + 8
y = 3x
y = 2x
y = x + 6
(one or more than one)
Answer:
y=3x
Step-by-step explanation:
Solve the system by graphing
y = -3/4x + 6
y = 2x - 5
Answer:
X= 4. Y = 3.
Step-by-step explanation:
If you have a graphing calculator, put the first equation into Y1. And second equation into Y2. Then, find the intersection of the two equations. That's how you find your answer.
Write a function trapezium_integrator(f, start, end, num_traps) that uses the Trapezium Rule to evaluate the integral ∫endstartf(x)dx where f, start, and end are defined in the formula above, and num_traps is the number of trapeziums that the integration interval should be divided into.
Notes:
You may assume num_traps >= 1
Hint: This should be a simple modification of your code from the last question.
We are still expecting you to compute the width of each trapezium and then use a for loop to solve this problem, iterating over the trapeziums to sum their areas. A more efficient approach, using numpy and avoiding any explicit loops, is the topic of one of the challenge questions.
The function trapezium_integrator uses the Trapezium Rule to approximate the value of a definite integral. It takes four parameters: f, which represents the function to be integrated, start and end, which specify the interval of integration, and num_traps, the number of trapeziums used to approximate the integral.
In the Trapezium Rule, the interval of integration is divided into multiple trapeziums of equal width. The area of each trapezium is calculated as the sum of the lengths of its parallel sides divided by 2, multiplied by its height (the difference between the function values at the two endpoints of the trapezium). The areas of all trapeziums are then summed to obtain an approximation of the integral.
The function calculates the width of each trapezium by dividing the interval length by the number of trapeziums. It then uses a for loop to iterate over the trapeziums, accumulating their areas. The final result is returned as the approximation of the integral.
By dividing the interval into smaller trapeziums, the Trapezium Rule provides a reasonably accurate estimate of the integral. However, for highly oscillatory or irregular functions, a large number of trapeziums may be required to achieve sufficient accuracy. In such cases, more sophisticated numerical integration methods may be more appropriate.
Learn more about definite integral here:
https://brainly.com/question/30760284
#SPJ11
Find the median of the data.
93,81,94,71,89,92,94,99
Answer: 92.5
So to find median all we have to do is rearange it from low - high and get the middle number
71 81 89 92 93 94 94 99
So take this and you know the middle is right in between 92 and 93
71 81 89 92 | 93 94 94 99
All you have to do then is take the mean of 92 and 93 (so do [92+93]/2)
Answer is 92.5
7. An article in a journal reports that 34% of American fathers take no responsibility for child care. A researcher claims that the figure is higher for fathers in the town of Littleton. A random sample of 225 fathers from Littleton, yielded 97 who did not help with child care. Using a .05 level of significance test the claim that the proportion is at least 34%.
The calculated value of z = 2.80 > the Critical value of z = -1.645, we reject the null hypothesis.
Hence, the claim that the proportion is at least 34% is rejected.
Therefore, the researcher's claim is true that the figure is higher for fathers in Littleton.
Null hypothesis:
H0: p ≥ 0.34
Alternative hypothesis:
Ha: p < 0.34
where:p = proportion of Littleton fathers who do not help with childcare
Here, the level of significance, α = 0.05
Level of significance = α = 0.05
The test statistics for a proportion is given as z-test.
The formula for calculating z-score for a proportion is: z = (p - P) / sqrt[P(1 - P) / n]
where:
P = Population proportion
p = Sample proportion
n = Sample size
The calculated value of z-statistics can be compared with the critical value of z-score from the standard normal distribution table at a particular level of significance.
If the calculated value of z is greater than the critical value of z, then we reject the null hypothesis; otherwise, we fail to reject the null hypothesis.
Calculating the z-statistic:
Here, Sample size n = 225
Sample proportion
p = 97/225
= 0.4311
Population proportion
P = 0.34z
= (p - P) / sqrt[P(1 - P) / n]z
= (0.4311 - 0.34) / sqrt[(0.34)(0.66) / 225]z
= 2.80
Since the alternative hypothesis is one-tailed (Ha: p < 0.34), the critical value of z at α = 0.05 can be found as follows:
The critical value of z = zα
= -1.645
Since the calculated value of z = 2.80 > the Critical value of z = -1.645, we reject the null hypothesis.
Hence, the claim that the proportion is at least 34% is rejected.
Therefore, the researcher's claim is true that the figure is higher for fathers in Littleton.
To know more about normal distribution visit:
https://brainly.com/question/15103234
#SPJ11
Can i pass 7th grade with 3 Fs?
Answer:
Depends on the state you’re from
Step-by-step explanation:
Answer:
Yes you can! Grades from middle school don't matter when you get to high school. But try to get those grades up!
Can someone help me on this
Answer:
Y = 10 I believe
Step-by-step explanation:
To solve this we need to find what number, times 6, equals 18 - it's fairly easy to find the answer is three.
So what, minus seven, equals 3?
Suppose that 5% of athletes at a certain university are using steroids or other
performance-enhancing drugs (PEDs). Unfortunately, the tests used to detect PEDs
aren't perfect. Suppose that 3% of athletes who are not using PEDs will test positive
and be accused of using PEDs. Meanwhile, 1% of athletes who are using PEDs will test
negative and escape detection. Calculate the probability that a randomly selected
athlete will test positive.
Answer:
There is a 8.11% of any randomly selected athlete to test positive.
Step-by-step explanation:
To make it easier, let's assume there are 100 athletes
5/100 have it
3/95 do not have it, but will test positive
1% of the 5 athletes who are using PEDs = 0.05%
This means that 4.95/100 will test positive
3/95 = 3.16%
(rounded, if you need a more precise answer, it's 3.1578947368421053)
3.16% + 4.95% = 8.11%
What is the simplified form of the expression below?
3+ 4i
4 - 2i
Answer:
7 + 2i is the simplified form
Step-by-step explanation:
3/5 + 7/8 + 3/10
please help
Answer:
soln,
3/5+7/8+3/10
3×8/5×8+7×5/8×5+3×4/10×4
24/40+35/40+12/40
24+35+12/40
71/40
ABM Services paid a $4.15 annual dividend on a day it closed at a price of $54 per share. What
was the yield?
Answer:
the yield is 7.68%
Step-by-step explanation:
The calculation of the yield is given below:
we know that
Yield is
= Annual dividend ÷ Price per share
= $4.15 ÷ $54
= 7.68%
Here we divide the annual dividend by the price per share in order to determine the yield
hence, the yield is 7.68%
And, the same would be considered
44% of what number is 400?
Answer:
909.09
Step-by-step explanation:
400 divided by 44% is about 909.09.
17. a type of bacteria doubles in population every 2 hours. given that there were approximately 5 bacteria to start with, how many bacteria will there be in 10 hours?
There will be approximately 320 bacteria in 10 hours.
To determine the number of bacteria in 10 hours, we need to calculate the number of doubling cycles that occur within that time period.
Since the bacteria population doubles every 2 hours, in 10 hours, there will be 10/2 = 5 doubling cycles.
Starting with approximately 5 bacteria, each doubling cycle will result in the population doubling. Therefore, the number of bacteria after 5 doubling cycles can be calculated as follows
5 bacteria * (2^5) = 5 * 32 = 160
Hence, there will be approximately 160 bacteria after 5 doubling cycles or after 10 hours.
To learn more about doubles
brainly.com/question/31929070
#SPJ11
According to a 2014 poll by the American Academy of Ophthalmology, Americans break down like this when it comes to eye color:
• Brown eyes: 45 %
• Blue eyes: 27 %
• Hazel eyes: 18%
• Green eyes: 9%
• Other: 1%
Consider a random group of 20 American people. Let a random variable X be the number of Americans in this group with green eyes.
(a) Argue that this is a binomial experiment.
(b) Find the probability that
i. None have green eyes
ii. Nine have green eyes
iii. At most three have green eyes
iv. At least four have green eyes
v. If four people out of twenty have green eyes. Is it unusual?
(c) What is the mean and standard deviation of this distribution?
This is a binomial experiment because it meets all the necessary conditions: a fixed number of trials (20 people in the group), independence of each trial (assuming eye color is independent), two possible outcomes (green eyes or not), a constant probability of success (9% for having green eyes), and the random variable representing the count of successes (number of Americans in the group with green eyes, denoted as X).
To argue that this is a binomial experiment, we need to check if the following conditions are met:
1. The experiment consists of a fixed number of trials: In this case, we are considering a fixed number of trials equal to 20, as we have a random group of 20 American people.
2. Each trial is independent: We assume that the eye color of each person in the group is independent of the others.
3. There are only two possible outcomes for each trial: The outcomes are either having green eyes or not having green eyes.
4. The probability of success is constant for each trial: The probability of an American having green eyes is fixed at 9% for each individual in the population.
5. The random variable X represents the count of successes: In this case, X represents the number of Americans in the group with green eyes.
Since all these conditions are satisfied, we can conclude that this is a binomial experiment.
To know more about binomial experiment refer here:
https://brainly.com/question/32104221#
#SPJ11
A rectangular prism has a volume of 600 cubic inches lf the height of the prism is 5 inches and the width is 10 inches what is the length of the prism? Enter your answer in the box.
Answer:
3 inches
Step-by-step explanation:
got it right on edg
i’m lost on this help would be nice
Answer:
3x - 4 = 14
+4. +4
3x = 18
÷3. ÷3
x = 6
how do you solve for the x ?
Answer:
x = -8
Step-by-step explanation:
these angles are vertical, therefore they are equal
x + 78 = 70
x = -8
What is the simplified form of the following expression? Assume x>0. 4 square root 3 over 2x
Answer:
the answer is B)
4√24x^3/2x
Solution:
The answer is B
Step-by-step explanation:
I just took the test.
1.02 1.05 1.08 1.00 1.00 1.06 1.08 1.01 1.04 1.07 1,00 kg Does this support the hypothesis, at 5%, that the mean weight for the whole batch is over 1.00 kg? 7.4 The expected lifetime of electric bulbs produced by a given process was 1500 hours. To test a new batch a sample of 10 was taken. This showed a mean lifetime of 1455 hours. The standard deviation of the production is known to still be 90 hours. Test the hypothesis, at 1% significance, that the mean lifetime of the electric light bulbs has not changed. 7.5 A sleeping drug and a neutral control were tested in turn on a random sample of 10 patients in a hospital. The data below represent the differences between the number of hours sleep under the drug and the neutral control for each patient: 2.0 0.2 -0.4 0.3 0.7 1.2 0.6 1.8 -0.2 1.0 hours Test, at 5%, the hypothesis that the drug would give more hours sleep on average than the control for all the patients in the hospital. 7.6 A coin is suspected of being biased. It is tossed 200 times and 114 heads occur. Carry out a hypothesis test to see whether the coin is indeed biased at 1% significance for anle of sight employees both?
1.02 1.05 1.08 1.00 1.00 1.06 1.08 1.01 1.04 1.07 1,00 kg: To test the hypothesis, at 5% significance, that the mean weight for the whole batch is over 1.00 kg, we can perform a one-sample t-test. The null hypothesis (H0) assumes that the mean weight is 1.00 kg, while the alternative hypothesis (H1) assumes that the mean weight is greater than 1.00 kg. By calculating the sample mean, sample standard deviation, and the test statistic, we can compare it with the critical value to determine if there is sufficient evidence to support the alternative hypothesis.
7.4: To test the hypothesis, at 1% significance, that the mean lifetime of electric light bulbs has not changed, we can use a one-sample t-test. The null hypothesis (H0) assumes that the mean lifetime is 1500 hours, while the alternative hypothesis (H1) assumes that the mean lifetime is different from 1500 hours. By calculating the sample mean, known standard deviation, and the test statistic, we can compare it with the critical value to determine if there is enough evidence to reject the null hypothesis.
7.5: To test the hypothesis, at 5% significance, that the drug gives more hours of sleep on average than the control for all patients in the hospital, we can perform a one-sample t-test. The null hypothesis (H0) assumes that there is no difference in the mean hours of sleep between the drug and the control, while the alternative hypothesis (H1) assumes that the drug provides more hours of sleep on average. By calculating the sample mean, sample standard deviation, and the test statistic, we can compare it with the critical value to determine if there is sufficient evidence to support the alternative hypothesis.
7.6: To test the hypothesis, at 1% significance, that the coin is biased, we can use a binomial test. The null hypothesis (H0) assumes that the coin is unbiased (probability of heads = 0.5), while the alternative hypothesis (H1) assumes that the coin is biased. By calculating the number of heads observed, the expected number of heads under the null hypothesis, and the test statistic, we can compare it with the critical value to determine if there is enough evidence to reject the null hypothesis and conclude that the coin is indeed biased.
To know more about the standard deviation, click here;
https://brainly.com/question/29115611
#SPJ11
Can someone state the range of this function pleaseee?
Answer:
Range = [0, ∞)
Step-by-step explanation:
Range is the y-values
For this question y starts at 0 and just continually goes up so:
Range = [0, ∞)
A tank is full of water. Find the work W required to pump the water out of the spout. (Use 9.8 m/s2 for g. Use 1000 kg/m3 as the weight density of water.) 8 m Step 1 A layer of water Ax m thick which lies x m above the bottom of the tank will be rectangular with length 8 m Using similar triangles, we can see that it will have width 8r 8 m Step 2 The mass of the layer of water is approximately equal to its density (1000 kg/m3) times its approximate volume x Ax(1000) kg m=
The work required to pump the water out of the spout is 200000.64 J.
Given, Length of the tank = 8 m
Density of water = 1000 kg/m3
The work required to pump the water out of the spout can be calculated as follows:
Step 1: Consider a layer of water 'dx' thick at a height of 'x' meter above the bottom of the tank.
The volume of this layer is given by,V = Area × height= (8 × x) × dx= 8x dx
The mass of this layer is given by,m = density × volume= 1000 × 8x dx= 8000x dx
The force required to lift this layer of water is given by, F = mg= 8000x dx × 9.8= 78400x dx
Step 2: To find the work done, we need to multiply the force by the distance moved.
The distance moved by this layer of water is given by d, where d = (8 - x).
Therefore, the work done in moving this layer of water is given by, dW = F × d= 78400x dx × (8 - x)= 627200x dx - 78400x² dx
Step 3: The total work done in pumping out all the water is given by the integral of dW from x = 0 to x = 8.
That is,W = ∫dW = ∫₀⁸ (627200x dx - 78400x² dx)= [313600x² - 261333.33x³]₀⁸= 200000.64 J
Therefore, the work required to pump the water out of the spout is 200000.64 J.
know more about work done
https://brainly.com/question/13662169
#SPJ11
Central Airlines claims that the median price of a round-trip ticket from Chicago, Illinois, to Jackson Hole, Wyoming, is $605. This claim is being challenged by the Association of Travel Agents, who believe the median price is less than $605. A random sample of 25 round-trip tickets from Chicago to Jackson Hole revealed 11 tickets were below $605. None of the tickets was exactly $605. State the null and alternate hypotheses.
Null hypothesis is that the median price of a round-trip ticket from Chicago, Illinois, to Jackson Hole, Wyoming is $605. Alternative hypothesis is that the median price of a round-trip ticket from Chicago, Illinois, to Jackson Hole, Wyoming is less than $605.
The median price of a round-trip ticket from Chicago, Illinois, to Jackson Hole, Wyoming is $605.
The median price of a round-trip ticket from Chicago, Illinois, to Jackson Hole, Wyoming is less than $605.As per the given question, Central Airlines claims that the median price of a round-trip ticket from Chicago, Illinois, to Jackson Hole, Wyoming is $605. But, this claim is being challenged by the Association of Travel Agents, who believes that the median price is less than $605. Hence, we need to test whether the median price is less than $605 or not.Hence,Null hypothesis is that the median price of a round-trip ticket from Chicago, Illinois, to Jackson Hole, Wyoming is $605. Alternative hypothesis is that the median price of a round-trip ticket from Chicago, Illinois, to Jackson Hole, Wyoming is less than $605.
Learn more about Null hypothesis here:
https://brainly.com/question/30821298
#SPJ11
Caitlin ate 20 pieces of candy on Monday and 17 pieces on Tuesday. by what percent did she decrease her candy intake
She decreased her candy intake by 15%
At a school play, an elementary school is accepting donations for a toy drive. An average donation of $8 per person is anticipated. The cost of the set design and costumes is $750, advertising in a local newspaper is $125, and posters to announce the concert cost is $89.
HELP HELP MEEEEE !!!!!
Answer:
sorry
Step-by-step explanation:
Find the area bounded by the curves y= and y= x2 Round the answer to two decimal places. Question 4 3 pts A company's marginal cost function is given by MC(x)= VX + 30 Find the total cost for making the first 10 units.
The total area of the regions between the curves is 1/3 square units
The total cost for making the first 10 units is 7.79
Calculating the total area of the regions between the curvesFrom the question, we have the following parameters that can be used in our computation:
y = √x and y = x²
With the use of graphs, the curves intersect at
x = 0 and x = 1
So, the area of the regions between the curves is
Area = ∫x² - √x
Integrate
[tex]Area = \frac{x^3}{3} - \frac{2x^\frac32}{3}[/tex]
Recall that x = 0 and x = 1
So, we have
[tex]Area = (\frac{0^3}{3} - \frac{2 * 0^\frac32}{3}) - (\frac{1^3}{3} - \frac{2 * 1^\frac32}{3} )[/tex]
Evaluate
Area = 0 + 1/3
Evaluate
Area = 1/3
Hence, the total area of the regions between the curves is 1/3 square units
Calculating the total costGiven that
MC(x) = √(x + 30)
Integrate to calculate the cost function
So, we have
[tex]C(x) = \frac{2}{3}(x + 30)^\frac23[/tex]
For the first 10, x = 10
So, we have
[tex]C(10) = \frac{2}{3}(10 + 30)^\frac23[/tex]
Evaluate
C(10) = 7.79
Hence, the total cost for making the first 10 units is 7.79
Read more about area at
brainly.com/question/15122151
#SPJ4
In 3^6, 6 is called ___.
base
exponent
Step-by-step explanation:
the correct answer is exponent because 6 is its power.
hope this answer will help u.
have a great time.
Find the cross product a x b where a = (3, -3, -2) and b = (3,-1,-2). ахь Find the cross product cx d where c = (1, -2,-2) and d=(-5,3,-1).
The cross product of vector c and d is equal to (-4,9,13).
The cross product of two vectors a and b in three-dimensional space is a vector that is perpendicular to both a and b and thus normal to the plane containing them. Here, we have to find the cross product of two given vectors. The given vectors are:a = (3, -3, -2) and b = (3, -1, -2) So, a x b = (4,0,6).The second one is given as: c = (1, -2,-2) and d=(-5,3,-1).
A vector in mathematics is a quantity that not only expresses magnitude but also motion or position of an object in relation to another point or object. Euclidean vector, geometric vector, and spatial vector are other names for it.
In mathematics, a vector's magnitude is defined as the length of a segment of a directed line, and the vector's direction is indicated by the angle at which the vector is inclined.
Know more about vector here:
https://brainly.com/question/29740341
#SPJ11
What is the range for the following data?
52, 32, 61, 82, 63
Answer:
The range would be 50.
Step-by-step explanation:
Range is found by putting a list or set of numbers in order, then subtracting the lowest number from the highest.
32, 61, 63, 52, 82
82 - 32 = 50
Methods to rid a model of multicollinearity include:
Methods to rid a model of multicollinearity include: Include determination,Collection of data,Variable change,Regression ridge
Multicollinearity in a model can be addressed in a number of ways, including:
Include determination: Eliminating at least one connected factors can assist with mitigating multicollinearity. Stepwise regression or LASSO regression can be used to select the most important features by analyzing the correlation matrix.
Collection of data: By introducing variation in the predictors, more diverse and independent data can help reduce multicollinearity. Expanding test size can likewise help in relieving multicollinearity impacts.
Variable change: Multicollinearity can be reduced by transforming variables using centering, standardization, or power or logarithmic transformations. These changes change the scale or type of the factors, making them less associated.
Regression ridge: By adding a penalty term to the least squares estimation, ridge regression reduces the impact of multicollinearity and reduces the coefficients. This regularization method balances out the appraisals and works on model execution.
PCA, or Principal Component Analysis,: PCA can be used to generate uncorrelated linear combinations of the starting variables. These new factors, known as head parts, can be utilized as indicators in the model, successfully lessening multicollinearity.
To know more about Multicollinearity refer to
https://brainly.com/question/30691253
#SPJ11