Why does granite have larger crystals than obsidian?

Answer:

A- Before the mechanic left, the molecules were moving away from each other. When she returned, they were moving around each other.

Explanation:

Brainliest?

A dilute solution of NaOH needs to be standardized in order to accurately determine its concentration. Standardization involves comparing the concentration of the NaOH solution to a known concentration of a primary standard substance.

There are several reasons why standardization is necessary. Firstly, NaOH is highly hygroscopic, meaning it readily absorbs moisture from the air. This moisture absorption can alter the concentration of the solution over time, leading to inaccurate results. By standardizing the NaOH solution, we can ensure that its concentration is accurately determined at a specific point in time. Secondly, during the manufacturing and storage process, impurities may be introduced into the NaOH solution, affecting its concentration. Standardization allows us to account for these impurities and determine the true concentration of the solution. Lastly, dilution of the NaOH solution introduces a potential for errors in the preparation process, such as inaccuracies in volumetric measurements. Standardization helps correct for these errors and provides a reliable concentration value for subsequent use in various analytical procedures.

Learn more about dilute solution here : brainly.com/question/31521767

#SPJ11

Answer:

/dɪˈmɒkrəsi/

--noun--

A system of government by the whole population or all the eligible members of a state, typically through elected representatives.

Answer: a) 0.579 atm

b) 0.585 bar

c) 58662 Pa

Explanation:

Pressure of the gas is defined as the force exerted by the particles on the walls of the container. It is expressed in various terms like 'mmHg', 'atm', 'kiloPascals' etc..

All these units of pressure are inter convertible.

We are given:

Pressure of the gas = 440 mmHg

a) Converting this unit of pressure into 'atm' by using conversion factor:

[tex]760mmHg=1atm[/tex]

[tex]440mmHg=\frac{1}{760}\times 440=0.579atm[/tex]

b) Converting this unit of pressure into 'bars' by using conversion factor:

[tex]760mmHg=1.01bar[/tex]

[tex]440mmHg=\frac{1.01}{760}\times 440=0.585bar[/tex]

c) Converting this unit of pressure into 'Pascal' by using conversion factor:

[tex]760mmHg=101325Pa[/tex]

[tex]440mmHg=\frac{101325}{760}\times 440=58662Pa[/tex]

A chemical equation must balance according to the rule of conservation of mass. According to the rule, mass cannot be generated or removed during a chemical process. Here the number of moles of electrons transferred in the given equation is 6.

A chemical equation is said to be balanced if the quantity of each type of atom in the reaction is the same on both the reactant and product sides. In a balanced chemical equation, the mass and charge are both equal.

The numbers which are used to balance the given chemical equation are known as the coefficients.

Here the balanced equation is:

Al³⁺ (aq) + Hg(s) → Al(s) + Hg²⁺(aq)

The oxidation and reduction half-reactions are:

Oxidation eqn: Al³⁺ + 3e⁻ → Al(s)

Reduction eqn: Hg(s) → Hg²⁺(aq) +  2e⁻

However, we need to balance equations to have an equal number of electrons. The least common multiple of 3 and 2 is 6, so you'll need to multiply the equations accordingly.

Oxidation eqn: Al³⁺ + 3e⁻ → Al(s)) ₓ 2

Reduction eqn: Hg(s) → Hg²⁺ (aq) +  2e⁻ ) ₓ 3

Oxidation eqn: 2Al³⁺ + 6e⁻ → 2Al(s)

Reduction eqn: 3Hg(s) → 3Hg²⁺(aq) +  6e⁻

The electrons transferred is 6.

To know more about balanced equation, visit;

https://brainly.com/question/29764227

#SPJ4

Your question is incomplete, most probably your full question was:

how many moles of electrons are transferred when the equation Al³⁺ (aq) + Hg(s) → Al(s) + Hg²⁺(aq) is balanced using the smallest whole-number coefficients.

a) To determine the number of possible emission lines, we need to consider the transitions between the energy levels. The formula to calculate the number of possible transitions is given by:

Number of transitions = n*(n-1)/2

where n is the number of energy levels. In this case, considering the four energy levels (n = 1, 2, 3, 4), we have:

Number of transitions = 4*(4-1)/2 = 6

Therefore, there are six possible emission lines considering only the four quantum levels.

b) The lowest energy transition occurs from the level with n=4 to the level with n=1. This transition represents the largest energy drop and therefore emits photons of the lowest energy.

c) The emission line with the shortest wavelength corresponds to the transition with the highest energy. In this case, it occurs from the level with n=4 to the level with n=1. The transition from a higher energy level to a lower energy level results in the emission of a photon with a shorter wavelength.

Learn more about emission lines here:

https://brainly.com/question/32493509

#SPJ11

The correct order of increasing magnitude of lattice energy is:

MgO < Sr O < KI.

Lattice energy is a measure of the energy released when ions in the gas phase come together to form a solid ionic compound. It represents the strength of the electrostatic attraction between oppositely charged ions in a crystal lattice. Lattice energy is an important property in understanding the stability, solubility, and other physical and chemical properties of ionic compounds.

Lattice energy is influenced by several factors, including the charges and sizes of the ions involved. Generally, compounds with higher charges or smaller ions tend to have higher lattice energies because the electrostatic attraction between the ions is stronger. Therefore, the correct order of increasing magnitude of lattice energy is:

MgO < Sr O < KI.

Learn more about Lattice energy from the link given below.

https://brainly.com/question/29735933

#SPJ4

Answer:

Balloon filled with helium is not a mixture because the gas in it consists of solely helium atoms.

Explanation:

Explanation:

An element is a pure substance as well, because if we fill up a balloon with just helium gas, it will only contain helium atoms.

Answer:

3400g

Explanation:

3.4×1000

3400g -_-

The statement "You can visualize a single nucleotide change through gel electrophoresis" is false.

Gel electrophoresis is a method for separating DNA fragments by size, not for visualizing single nucleotide changes. To visualize single nucleotide changes, other methods like DNA sequencing are used.Gel electrophoresis is a method of separating molecules according to their size and electrical charge. DNA fragments are loaded onto a gel, and an electric field is applied to move the fragments through the gel matrix. The smaller fragments will travel faster and end up at the bottom of the gel while the larger ones will remain closer to the top. The gel can then be stained with a dye such as ethidium bromide to visualize the bands.However, gel electrophoresis cannot visualize single nucleotide changes. To do this, other methods like DNA sequencing or hybridization probes are used. DNA sequencing directly reads the DNA sequence and can identify individual nucleotide changes. Hybridization probes are small pieces of DNA that are designed to bind to a specific sequence of nucleotides and can be labeled with a fluorescent marker to visualize the presence or absence of a specific sequence or mutation.

Learn more about  gel electrophoresis here:

https://brainly.com/question/30791630

#SPJ11

Answer:

CNS (central nervous system)

Explanation:

The central nervous system is responsible for integrating sensory information and responding accordingly.

Neurons (specialized cells of the nervous system ) send signals along thin fibers called axons and communicate with other cells by releasing chemicals called neurotransmitters at cell-cell junctions called synapses.

Answer:

asexual cell

Explanation:there are mainly 2 types sexual and asexual i would say asexual because they grow without another parent and don't have a nucleus.

To calculate the average rate of disappearance of H2O2(aq) in M/s in the first 45.0 seconds of the reaction, we need to determine the change in the concentration of H2O2 over the given time interval. By using the data provided for the volume of O2 collected at different time points, we can convert the volume of O2 to moles and then to moles of H2O2. Dividing the change in moles of H2O2 by the time interval gives us the average rate of disappearance. The correct answer from the options provided is B) 1.64 x 10^4 M/s.

To calculate the average rate of disappearance of H2O2 in M/s, we first need to convert the volume of O2 collected to moles. Since 2 mL of O2 is collected when 1 mole of H2O2 reacts, we can convert the volume of O2 to moles of H2O2 at each time point.

At 45.0 seconds, 2 mL of O2 is collected, which corresponds to 1 mole of H2O2. Therefore, the concentration of H2O2 at t = 45.0 seconds is 1 M.

At 90.0 seconds, 4 mL of O2 is collected, indicating that 2 moles of H2O2 have reacted. Hence, the concentration of H2O2 at t = 90.0 seconds is 2 M.

To calculate the average rate of disappearance, we find the change in concentration of H2O2 over the given time interval:

Change in concentration = (Final concentration - Initial concentration)

= (2 M - 1 M) = 1 M

Since the time interval is 45.0 seconds, we can calculate the average rate of disappearance by dividing the change in concentration by the time interval:

Average rate = Change in concentration / Time interval

= 1 M / 45.0 s = 1.64 x 10^4 M/s

Therefore, the average rate of disappearance of H2O2 in the first 45.0 seconds of the reaction is 1.64 x 10^4 M/s, which corresponds to option B.

To learn more about rate of disappearance, refer:

brainly.com/question/31314471

#SPJ11

Answer:

362,5J

Explanation:

formula for calculating Gravitational Potential Energy is mass×gravitational field strength ×height

12.5×10×2.9=362,5J

Every gas has a unique set of spectral lines that help identify the gas is a true statement.

A spectral line is a dark or bright line that appears in an otherwise uniform and continuous spectrum as a result of light being emitted or absorbed at a narrow frequency range as opposed to frequencies close by.

Note that a lot of element has a distinct line spectrum, which is known as the "fingerprint" of that element. Because each element has a different amount of electrons and hence a diverse range of energy levels, each one's spectra are distinctive.

Learn more about spectral lines  from

https://brainly.com/question/4157056
#SPJ1

Answer:

sound waves in air and water are longitudinal. Their disturbances are periodic variations in pressure that are transmitted in fluids. Figure 13.5 the wave on a guitar string is transverse

Answer:

120 liters

Explanation:

From the question,

Applying boyles law

PV = P'V'................ Equation 1

Where P = initial pressure, V = Initial Volume, P' = Final pressure, V' = Final Volume.

make V' The subject of the equation

V' = PV/P'............. Equation 2

Given: P = 2 kpa, V = 60 liters, P' = 1 kpa

Substitute these values into equation 2

V' = (2×60)/1

V' = 120 liters

Hence the right option is A. 120 liters

Answer:

The right response is "6 A". A further explanation is given below.

Explanation:

The given values are:

Resistance,

R = 6 ohms

Voltage,

V = 36 volts

As we know,

⇒  [tex]V=IR[/tex]

then,

⇒  [tex]I=\frac{V}{R}[/tex]

On substituting the values, we get

⇒     [tex]=\frac{36}{6}[/tex]

⇒     [tex]=6 \ A[/tex]

The correct option is (C) [B] > [C].

A + 2B ⇌ 2CThe equilibrium constant, Keq = 100Mole of A, nA = 0.1 molMole of B, nB = 0.1 molInitial concentration of A, [A] = 0.1/1.0 = 0.1 MInitial concentration of B, [B] = 0.1/1.0 = 0.1 MAt equilibrium, the reaction quotient (Qc) is given as,Qc = [C]²/([A][B]²)As Keq > Qc, the forward reaction is favored and the concentration of reactants decreases while the concentration of products increases. Now, let us determine the concentration of products C when the reaction reaches equilibrium.As the mole ratio of A:B:C is 1:2:2, the number of moles of C formed = 2nB = 2(0.1) = 0.2molConcentration of C at equilibrium, [C] = 0.2/1.0 = 0.2 MNow, let us compare the concentration of each reactant and product at equilibrium:[A] > [B][A] = [B][A] < [B][B] > [C][B] = [C]Hence, the correct option is (C) [B] > [C].

Learn more about  equilibrium constant here:

https://brainly.com/question/28559466

#SPJ11

The complete chemical equation for cellular respiration is:

C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O + Energy

In this equation, glucose (C₆H₁₂O₆) is combined with oxygen (O₂) to produce carbon dioxide (CO₂) and water (H₂O). The process of cellular respiration occurs in the mitochondria of cells and involves the breakdown of glucose to release energy in the form of ATP (adenosine triphosphate).

During cellular respiration, glucose is oxidized to form carbon dioxide, and oxygen is reduced to form water. This process releases energy that is stored in ATP molecules and is used by cells to carry out various metabolic activities.

Overall, cellular respiration is a vital process in organisms to generate energy for cellular functions and is essential for the survival and functioning of living organisms.

To know more about the cellular respiration refer here :

https://brainly.com/question/13721588#

#SPJ11

The correct option is C. a= true; b = false. The statement "Anions are larger than their corresponding neutral atoms" is true, and the statement "Ca2+ is smaller than Ca" is false.

a. Anions are larger than their corresponding neutral atoms.

This statement is true. When an atom gains one or more electrons to become an anion, the increased electron-electron repulsion causes the electron cloud to expand. As a result, the radius of the anion becomes larger than that of the neutral atom.

b. Ca2+ is smaller than Ca.

This statement is false. When an atom loses one or more electrons to become a cation, the electron-electron repulsion decreases, causing the remaining electrons to be drawn closer to the nucleus. As a result, the radius of the cation becomes smaller than that of the neutral atom. Therefore, Ca2+ is smaller than Ca.

The statement "Anions are larger than their corresponding neutral atoms" is true, and the statement "Ca2+ is smaller than Ca" is false. Therefore, the correct option is C. a= true; b = false.

To know more about Anions, visit:

https://brainly.com/question/28971609

#SPJ11

The equilibrium constant expression for the reaction CO(g) + 2H₂(g) ⇌ CH₃OH(g) is K = [CH₃OH] / [CO][H₂]^{2}.

The equilibrium constant is a measure of the relative concentrations of the reactants and products at equilibrium. A large value of K indicates that the reaction is product-favored, while a small value of K indicates that the reaction is reactant-favored.

The equilibrium constant is calculated by taking the product of the equilibrium concentrations of the products and dividing it by the product of the equilibrium concentrations of the reactants.

The equilibrium concentrations are the concentrations of the reactants and products at equilibrium, which is the point at which the forward and reverse reactions are occurring at the same rate.

The equilibrium constant is a useful tool for predicting the direction of a chemical reaction. A large value of K indicates that the reaction is product-favored, meaning that the products will be more abundant at equilibrium than the reactants.

A small value of K indicates that the reaction is reactant-favored, meaning that the reactants will be more abundant at equilibrium than the products.

The equilibrium constant is also a useful tool for predicting the effect of changes in temperature and pressure on a chemical reaction. An increase in temperature will generally shift the equilibrium to the side of the reaction that produces more moles of gas.

A decrease in pressure will generally shift the equilibrium to the side of the reaction that has fewer moles of gas. The equilibrium constant is a valuable tool for understanding and predicting the behavior of chemical reactions.

By understanding the equilibrium constant, chemists can predict the direction of a reaction, the effect of changes in temperature and pressure, and the relative concentrations of the reactants and products at equilibrium.

To know more about equilibrium constant expression, refer here:

https://brainly.com/question/29748652#

#SPJ11

The rate of the acid-catalyzed dehydration of 1-methylcyclohexanol would be faster compared to that of cyclohexanol. This can be attributed to the presence of the methyl group ([tex]CH_{3}[/tex]) in 1-methylcyclohexanol.

The methyl group is an electron-donating group that increases the electron density on the adjacent carbon atom.

As a result, the carbon-hydrogen bond adjacent to the hydroxyl group becomes weaker and more susceptible to acid-catalyzed dehydration.

Therefore, the presence of the methyl group enhances the reactivity of 1-methylcyclohexanol compared to cyclohexanol, leading to a faster rate of dehydration.

The electron-donating nature of the methyl group promotes the departure of the hydroxyl group and facilitates the formation of the double bond.

To know more about electron density, refer here:

https://brainly.com/question/28428748#

#SPJ11

Answer:

Respiration in plants: The process of respiration in plants involves using the sugars produced during photosynthesis plus oxygen to produce energy for plant growth. In many ways, respiration is the opposite of photosynthesis. ... As with photosynthesis, plants get oxygen from the air through the stomata.

Transpiration in plants: The water eventually is released to the atmosphere as vapour via the plant's stomata — tiny, closeable, pore-like structures on the surfaces of leaves. Overall, this uptake of water at the roots, transport of water through plant tissues, and release of vapour by leaves is known as transpiration.

Sources (jic)

https://www.usgs.gov/special-topic/water-science-school/science/evapotranspiration-and-water-cycle

https://www.pthorticulture.com/en/training-center/basics-of-plant-respiration/

Good luck!!

Answer:

(4) asexual reproduction (5) vegetative propagation (6) binary fission (7) budding (8) fragmentation

The correct words to fill the given blanks would be as follows:

4). A-s-e-x-u-a-l reproduction.

5). Vegetative propagation.

6) Binary fission

7). Budding

8) Fragmentation

Reproduction

Reproduction is denoted as the process by which living organisms generate their younger beings.

Some organisms generate through s-e-x-u-a-l mediums while others generate through the A-s-e-x-u-a-l process.

The a-s-e-x-u-a-l methods of reproduction include:

Learn more about "Organisms" here:

brainly.com/question/9349989

The chemical formula of the gas is Option c, Helium.

We need to take into account the molar masses and the root mean square (RMS) speeds of various gases in order to ascertain the chemical formula of the gas that escapes through the pinhole 2.65 times quicker than N₂ gas.

The following equation describes how a gas's molar mass and RMS speed are related:

RMS velocity = 1/√(molar mass)

The following ratio may be established since the provided gas leaves 2.65 times more quickly than N₂ gas:

RMS speed of the given gas / RMS speed of N₂ gas = 2.65

Now, let's compare the molar masses of the options provided:

a. Ne (Neon) has a molar mass of approximately 20 g/mol.

b. O₂ (Oxygen) has a molar mass of approximately 32 g/mol.

c. He (Helium) has a molar mass of approximately 4 g/mol.

d. Ar (Argon) has a molar mass of approximately 40 g/mol.

Since the ratio of RMS speeds is greater than 1, the molar mass of the given gas must be less than that of N₂ gas. Among the options, the only gas with a molar mass significantly lower than N₂ gas is Helium (He) with a molar mass of approximately 4 g/mol.

Therefore, the chemical formula of the gas is Option C, Helium.

To learn more about gas, refer to:

https://brainly.com/question/6140407

#SPJ4

The moles of sodium chloride we need to make 500mL solution is 0.125 mole.

Molarity of any solution tells about the concentration and it is define as the no. of moles of solute present in per liter of solution, and it is represented as:

M = n/V, where

M = molarity of given NaCl solution = 0.250M

V = volume of NaCl solution = 500mL = 0.5L

No we put these values on the above equation and calculate for n, we get:

n = (0.250M)(0.5L) = 0.125 mole

Hence, required moles of NaCl is 0.125 mole.

To know more about molarity, visit the below link:

https://brainly.com/question/489225

Kinetic energy is an energy present in the object with motion. When the water freezes then the speed of the molecules decreases. Thus, option A is accurate.

Kinetic energy is possessed by an object when it is in moving motion and because of the molecules. When the temperature decreases the movement of the molecule decreases.

The decrease in the kinetic energy results in a gain of potential energy and release of heat in the surrounding. The temperature and the kinetic energy are directly proportional and affect the speed of the molecules.

Therefore, the freezing of water results in decreased speed of the water molecule.

Learn more about kinetic energy here:

https://brainly.com/question/6068541

#SPJ1

The compounds that can can form intermolecular hydrogen bonds are,

A) (CH₃)₂NH

B) HOCH₂CH₂OH

A) (CH₃)₂NH or (CH₃)₃N: The compound that can form intermolecular hydrogen bonds is (CH₃)₂NH. In this compound, the presence of a lone pair of electrons on the nitrogen atom allows it to act as a hydrogen bond acceptor. Hydrogen bonds can form between the hydrogen atom in (CH₃)₂NH and a hydrogen bond donor, such as a molecule with an electronegative atom (e.g., oxygen or nitrogen) bonded to a hydrogen atom.

B) HOCH₂CH₂OH or FCH₂CH₂F: The compound that can form intermolecular hydrogen bonds is HOCH₂CH₂OH. In this compound, there are two hydrogen bond donors (the hydroxyl groups) and two hydrogen bond acceptors (the oxygen atoms). Hydrogen bonds can form between the hydrogen atoms in HOCH₂CH₂OH and the oxygen atoms of other molecules.

Therefore, the compounds (CH₃)₂NH and HOCH₂CH₂OH can form intermolecular hydrogen bonds."

Learn more about intermolecular hydrogen bonds from the link given below.

https://brainly.com/question/10602513

#SPJ4