why does acetyl chloride (2 carbons with 1 polar functional group) react with water almost violently but you had to warm and shake the mixture of water and benzoyl chloride (7 carbons)?

The noble gas that takes almost half as long as Neon to effuse through a pinhole under the exact same conditions is Helium.

Effusion is the process by which gas particles flow through a small opening. According to Graham's Law of Effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. In other words, lighter gases effuse faster than heavier gases under the same conditions.

The molar mass of Helium is approximately 4 g/mol, while the molar mass of Neon is approximately 20 g/mol. Since Neon has a larger molar mass than Helium, we would expect Helium to effuse faster than Neon.

Therefore the answer is "the noble gas that takes almost half as long as Neon to effuse through a pinhole under the exact same conditions is Helium."

Learn more about effusion here: https://brainly.com/question/28320456

#SPJ11

The equilibrium constant (Kb) for the reaction HA(aq) + OH⁻(aq) ⇆ A⁻(aq) + H₂O(ℓ) is 3.80×10⁻⁶.

To find the equilibrium constant for this reaction, we'll use the ionization constant of HA (Ka = 2.62×10⁻⁹) and the ion product of water (Kw = 1.0×10⁻¹⁴). The relationship between Ka, Kb, and Kw is given by:

Kw = Ka × Kb

Rearrange the equation to solve for Kb:

Kb = Kw / Ka

Plug in the values:

Kb = (1.0×10⁻¹⁴) / (2.62×10⁻⁹)

Kb = 3.80×10⁻⁶

Therefore, the equilibrium constant (Kb) for the given reaction is 3.80×10⁻⁶.

To know more about equilibrium constant click on below link:

https://brainly.com/question/31321186#

#SPJ11

To calculate the standard enthalpy change, δ∘, for the reaction A + B ⟶ 2C, we can use Hess's Law and the given information about the enthalpies of formation and standard enthalpy change for the reaction A + B ⟶ 2C at 298 K is +662.4 kJ/mol.

First, we can write the two reactions and their enthalpy changes as follows: A + B ⟶ 2D δ∘ = +661.8 kJ/mol 2D ⟶ D + C δ∘ = -308.0 J/K/mol = -0.308 kJ/mol/K (note that this is given in J/K/mol, so we need to convert it to kJ/mol)

Next, we can use the fact that the enthalpy change is a state function, meaning that it only depends on the initial and final states of the system and not on the path taken between them.

Therefore, we can add the two reactions together to obtain the overall reaction of interest: A + B ⟶ 2C δ∘ = ? To do this, we need to cancel out the intermediate species, D, on both sides of the equation.

We can do this by multiplying the second reaction by 2 and reversing it: 2D ⟶ 2C δ∘ = -2(-0.308 kJ/mol/K) = +0.616 kJ/mol/K A + B ⟶ 2D δ∘ = +661.8 kJ/mol A + B ⟶ 2C δ∘ = +662.4 kJ/mol. Therefore, the standard enthalpy change for the reaction A + B ⟶ 2C at 298 K is +662.4 kJ/mol.

Know more about  enthalpy change here:

https://brainly.com/question/29556033

#SPJ11

Physicians use tables that list the liters of oxygen consumed per gram of foodstuff to measure the metabolic rate of conversion of foodstuffs in the body.

The metabolic rate of conversion of foodstuffs in the body can be measured by determining the amount of oxygen consumed per gram of foodstuff. Physicians use tables that list the liters of oxygen consumed per gram of foodstuff to make these measurements.

For example, when glucose reacts in the body, it reacts with oxygen to produce water and carbon dioxide. The balanced chemical equation for this reaction is C6H12O6 (glucose) + 6O2(g) → 6H2O(l) + 6CO2(g).

By measuring the amount of oxygen consumed during this reaction and consulting a table of oxygen consumption rates for glucose, physicians can determine the metabolic rate of glucose conversion in the body.

This measurement is important because it provides information about how efficiently the body is processing foodstuffs and can help diagnose and monitor various metabolic disorders.

For more questions like Reaction click the link below:

https://brainly.com/question/30086875

#SPJ11

In this case, Mo3+ is the larger species compared to Mo. This is because Mo3+ has lost three electrons, making its outermost shell of electrons further away from the nucleus than in the neutral Mo atom. This results in an increase in the atomic radius of Mo3+ compared to Mo.

The atomic radius of an element or ion is a measure of the size of its atoms, usually expressed in picometers. It is determined by the distance between the nucleus and the outermost electrons.

When an atom loses electrons, its positive charge increases, resulting in a stronger attraction between the electrons and the nucleus. This increased attraction pulls the electrons closer to the nucleus, reducing the size of the ion.

However, the loss of electrons also leads to an increase in the number of protons compared to the number of electrons, which results in an overall decrease in the effective nuclear charge experienced by each electron, leading to an expansion of the electron cloud and thus an increase in the atomic radius.

Therefore, in the case of Mo and Mo3+, Mo3+ is the larger species due to the expansion of its electron cloud.

To know more about nucleus refer here:

https://brainly.com/question/19789552#

#SPJ11

solvents is aprotic or protic:

Part A isopropanol - protic
Part B ethanol - protic

Part C toluene - aprotic
Part D propanoic acid - protic
classify these solvents as aprotic or protic:
Part A: Isopropanol is a protic solvent.
Part B: Ethanol is a protic solvent.
Part C: Toluene is an aprotic solvent.
Part D: Propanoic acid is a protic solvent.

Learn more about isopropanol t here:

https://brainly.com/question/22284953

#SPJ11

solvents is aprotic or protic:

Part A isopropanol - protic
Part B ethanol - protic

Part C toluene - aprotic
Part D propanoic acid - protic
classify these solvents as aprotic or protic:
Part A: Isopropanol is a protic solvent.
Part B: Ethanol is a protic solvent.
Part C: Toluene is an aprotic solvent.
Part D: Propanoic acid is a protic solvent.

Learn more about isopropanol t here:

https://brainly.com/question/22284953

#SPJ11

Hto determine if benzophenone or diphenylmethanol is more polar, we need to compare their molecular structures and the presence of polar functional groups.

Benzophenone has a central carbonyl group (C=O) connecting two phenyl rings. The carbonyl group is polar due to the electronegativity difference between carbon and oxygen atoms.
Diphenylmethanol has a hydroxyl group (OH) connected to a carbon atom, which is in turn connected to two phenyl rings. The hydroxyl group is polar due to the electronegativity difference between oxygen and hydrogen atoms.
Between the two compounds, diphenylmethanol is more polar because the hydroxyl group (OH) is more polar than the carbonyl group (C=O) in benzophenone. The polarity of the hydroxyl group in diphenylmethanol contributes a stronger dipole moment, making it more polar overall.

Learn more about benzophenone here:

https://brainly.com/question/31408222

#SPJ11

Hto determine if benzophenone or diphenylmethanol is more polar, we need to compare their molecular structures and the presence of polar functional groups.

Benzophenone has a central carbonyl group (C=O) connecting two phenyl rings. The carbonyl group is polar due to the electronegativity difference between carbon and oxygen atoms.
Diphenylmethanol has a hydroxyl group (OH) connected to a carbon atom, which is in turn connected to two phenyl rings. The hydroxyl group is polar due to the electronegativity difference between oxygen and hydrogen atoms.
Between the two compounds, diphenylmethanol is more polar because the hydroxyl group (OH) is more polar than the carbonyl group (C=O) in benzophenone. The polarity of the hydroxyl group in diphenylmethanol contributes a stronger dipole moment, making it more polar overall.

Learn more about benzophenone here:

https://brainly.com/question/31408222

#SPJ11

Coal powered stations and  factories are direct and indirect sources of particulate matter.

One of the worst types of pollution in the air in India and around the world is particle pollution, also known as particulate matter pollution. Human activities are the main source of the increase in particle pollution, a type of air pollution.

Factories, power plants, incinerators, industries, autos, and diesel generators are major contributors of particulate matter emissions. All of this has human origins or is the result of human activity. Coal powered stations and  factories are direct and indirect sources of particulate matter.

To know more about particulate matter, here:

https://brainly.com/question/15230454

#SPJ1

In the crystal, ion, or molecular structure, the bond "holds together" the atoms.

Thus, The attraction between two or more atoms that enables them to combine to produce a stable chemical compound is known as chemical bonding.

Chemical bonds can have many different types, but covalent and ionic bonds are the most well-known. When one atom has less energy, the other has enough thanks to these bonds.

Atoms are held together by the force of attraction, which enables the electrons to unite in a bond.

Thus, In the crystal, ion, or molecular structure, the bond "holds together" the atoms.

Learn more about Bonds, refer to the link:

https://brainly.com/question/17405470

#SPJ1

The Ka for 0.764 mol of a weak acid HX when dissolved in 2.00 l of aqueous solution, is approximately 1.98 x 10^(-5).

1. Calculate the concentration of HX:
  - Divide the moles of HX by the volume of the solution.
   0.764 mol / 2.00 L = 0.382 M

2. Find the concentration of H+ ions from the pH value:
  - pH = -log[H+]
  - 2.56 = -log[H+]
  - H+ concentration = 10^(-2.56) ≈ 2.75 x 10^(-3) M

3. Use the definition of the weak acid dissociation constant (Ka):
  - Ka = [H+][A-] / [HX]
  - Since HX is a weak acid, we can assume that the concentrations of H+ and A- are approximately equal.
  - Ka = (2.75 x 10^(-3))^2 / (0.382 - 2.75 x 10^(-3))
  - Ka ≈ 1.98 x 10^(-5)

Learn more about Ka here:

https://brainly.com/question/30666585

#SPJ11

The pH at the half-stoichiometric point for this titration is approximately 3.37.

The half-stoichiometric point is the point in the titration where exactly half of the acid has reacted with the base. In this case, the balanced chemical equation for the reaction is:

HNO2 + KOH → KNO2 + H2O

The stoichiometry of the reaction is 1:1, meaning that 1 mole of HNO2 reacts with 1 mole of KOH. Therefore, at the half-stoichiometric point, 0.11 moles of HNO2 have reacted with 0.11 moles of KOH.

To calculate the pH at this point, we need to first calculate the concentration of HNO2 remaining in solution. The initial concentration of HNO2 is 0.22 M, and at the half-stoichiometric point, half of it has reacted, leaving 0.11 M remaining.

To calculate the pH, we can use the acid dissociation constant (Ka) for HNO2:

Ka = [H+][NO2-]/[HNO2]

At the half-stoichiometric point, we can assume that all of the HNO2 has dissociated, so:

Ka = [H+][NO2-]/(0.11)

Solving for [H+], we get:

[H+] = sqrt(Ka*[HNO2]) = sqrt(4.3E-4 * 0.11) = 0.0125 M

Using the pH formula, pH = -log[H+], we can calculate the pH:

pH = -log(0.0125) = 1.90

Therefore, the pH at the half-stoichiometric point for the titration of 0.22 M HNO2 with 0.01 M KOH is 1.90.

Learn more about half-stoichiometric point here: brainly.com/question/9173781

#SPJ11

The pH at the half-stoichiometric point for this titration is approximately 3.37.

The half-stoichiometric point is the point in the titration where exactly half of the acid has reacted with the base. In this case, the balanced chemical equation for the reaction is:

HNO2 + KOH → KNO2 + H2O

The stoichiometry of the reaction is 1:1, meaning that 1 mole of HNO2 reacts with 1 mole of KOH. Therefore, at the half-stoichiometric point, 0.11 moles of HNO2 have reacted with 0.11 moles of KOH.

To calculate the pH at this point, we need to first calculate the concentration of HNO2 remaining in solution. The initial concentration of HNO2 is 0.22 M, and at the half-stoichiometric point, half of it has reacted, leaving 0.11 M remaining.

To calculate the pH, we can use the acid dissociation constant (Ka) for HNO2:

Ka = [H+][NO2-]/[HNO2]

At the half-stoichiometric point, we can assume that all of the HNO2 has dissociated, so:

Ka = [H+][NO2-]/(0.11)

Solving for [H+], we get:

[H+] = sqrt(Ka*[HNO2]) = sqrt(4.3E-4 * 0.11) = 0.0125 M

Using the pH formula, pH = -log[H+], we can calculate the pH:

pH = -log(0.0125) = 1.90

Therefore, the pH at the half-stoichiometric point for the titration of 0.22 M HNO2 with 0.01 M KOH is 1.90.

Learn more about half-stoichiometric point here: brainly.com/question/9173781

#SPJ11

The overall order of the reaction is; 2 + (-1) = 1, The reaction is first order overall.

The overall order of a reaction is the sum of the orders of the reactant concentrations in the rate law.

In this case, the rate law is given as:

rate = k[O3]² [O2]⁻¹

The order of the reaction with respect to [O₃] is 2, because the concentration of [O₃] is raised to the power of 2 in the rate law.

The order of the reaction with respect to [O₂] is -1, because the concentration of [O₂] is raised to the power of -1 in the rate law.

Therefore, the overall order of the reaction is:

2 + (-1) = 1

The reaction is first order overall.

Learn more about rate law.

https://brainly.com/question/30379408

#SPJ4

The balanced chemical equation for the reaction between formic acid (HCOOH) and sodium hydroxide (NaOH) is: The Correct option is B the pH after 5.00 mL of NaOH has been added is 4.26.

[tex]HCOOH + NaOH → NaCOOH + H_{2} O[/tex]

This indicates that 1 mole of HCOOH reacts with 1 mole of NaOH.

First, let's calculate the number of moles of HCOOH present in the initial 30.00 ml solution:

moles of HCOOH = (0.125 mol/L) × (0.03000 L) = 0.00375 mol

Since the stoichiometry of the reaction is 1:1, 5.00 ml of 0.175 M NaOH corresponds to:

moles of NaOH = (0.175 mol/L) × (0.00500 L) = 0.000875 mol

To calculate the moles of HCOOH remaining after the addition of NaOH:

moles of HCOOH = initial moles - moles of NaOH added

= 0.00375 mol - 0.000875 mol

= 0.002875 mol

Now we can use the Henderson-Hasselbalch equation to calculate the pH:

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of formic acid, [A-] is the concentration of the formate ion (HCOO-), and [HA] is the concentration of the undissociated formic acid (HCOOH).

The pKa of formic acid is 3.75, and the concentrations of HCOO- and HCOOH can be calculated using the moles and volumes:

[A-] = moles of NaCOOH / total volume

= 0.000875 mol / 0.03500 L

= 0.025 mol/L

[HA] = moles of HCOOH / total volume

= 0.002875 mol / 0.03500 L

= 0.082 mol/L

Substituting into the Henderson-Hasselbalch equation:

pH = 3.75 + log(0.025/0.082)

= 4.26

Therefore, the pH after 5.00 mL of NaOH has been added is 4.26.

Learn more about  chemical equation

https://brainly.com/question/19626681

#SPJ4

The relative mass of a proton is 1, the relative mass of a neutron is 1, and the relative mass of an electron is approximately 1/1836 or 0.00055 (i.e., electrons are much lighter than protons and neutrons).

What is relative mass ?

Relative mass is the mass of an object or particle compared to the mass of another object or particle, usually a standard reference object or particle. Relative mass is often expressed in terms of a dimensionless quantity known as the mass ratio, which is the ratio of the mass of the object or particle in question to the mass of the reference object or particle. The reference object or particle is usually defined as having a mass of 1, so the mass ratio for any other object or particle is simply equal to its mass divided by the mass of the reference object or particle. Relative mass is commonly used in physics and chemistry to describe the mass of subatomic particles, such as electrons, protons, and neutrons, and to compare the masses of different molecules, compounds, or elements.

To know more about relative mass, visit:

https://brainly.com/question/19335581

#SPJ9

Complete question is: The relative mass of a proton is 1, the relative mass of a neutron is 1, and the relative mass of an electron is approximately 1/1836 or 0.00055.

Let's determine the signs of delta S (entropy change) and delta H (enthalpy change) for each process.

A) Solid sublimation:
Delta S: Positive (entropy increases as the solid changes to gas, which is more disordered)
Delta H: Positive (energy is absorbed for solid to transition into gas)

B) Lowering temperature of a solid by 25 degrees Celsius:
Delta S: Negative (entropy decreases as the solid becomes more ordered at lower temperatures)
Delta H: Negative (energy is released when cooling the solid)

C) Evaporation of ethanol from a beaker:
Delta S: Positive (entropy increases as liquid changes to gas, becoming more disordered)
Delta H: Positive (energy is absorbed for liquid ethanol to evaporate)

D) Diatomic molecule dissociating into atoms:
Delta S: Positive (entropy increases as the system becomes more disordered when molecules dissociate)
Delta H: Positive (energy is absorbed to break bonds in the diatomic molecule)

E) Combustion of charcoal to form CO2(g) and H2O(g):
Delta S: Positive (entropy increases as the solid reactant forms gaseous products)
Delta H: Negative (energy is released during combustion as it's an exothermic reaction)

To know more about Solid sublimation:

https://brainly.com/question/28626755

#SPJ11

In solvolysis, the carbon-halogen (C-X) bond is broken in presence of water to form a carbon-oxygen (C-OH) bond.

From the given options, 3-iodo-3-methylpentane undergoes solvolysis in aqueous ethanol most rapidly because;

1. Iodine has a larger atomic radius compared to bromine and chlorine and this forms weaker carbon-halogen (C----I) bonds, which are easier to break during solvolysis.
2. 3-iodo-3-methylpentane has a tertiary carbon atom (R3-C---I) bonded to the iodine. Tertiary carbocations (R3-C+) are more stable due to hyperconjugation and inductive effects, which allows the reaction to proceed faster compared to primary and secondary carbocations.

Therefore, the weak C---I bond and the stability of the tertiary carbocation (R3-C+) formed, contribute to the rapid solvolysis of 3-iodo-3-methylpentane in aqueous ethanol.

https://brainly.com/question/31485910

#SPJ11

In this balanced equation, the coefficient for Cu is 6. So the correct answer is: 6

In the given equation, the reaction is between copper (Cu) and nitric acid (HNO3), and the products formed are copper(II) nitrate (Cu(NO3)2), nitrogen monoxide (NO), nitrogen dioxide (NO2), and water (H2O). The ratio of NO to NO2 is given as 2:3.

To balance the equation, we need to ensure that the same number of atoms of each element are present on both sides of the equation. Here's how the equation is balanced:

6 Cu + 18 HNO3 → 6 Cu(NO3)2 + 4 NO + 6 NO2 + 6 H2O

The coefficient for Cu is 6, which means that 6 moles of Cu are reacting with the other species in the equation. This coefficient is chosen in such a way that it balances the equation, ensuring that there are 6 moles of Cu on both the reactant and product sides of the equation.

So, the correct answer for the coefficient of Cu in the balanced equation is 6. This means that 6 moles of Cu are required to react with 18 moles of HNO3 to produce 6 moles of Cu(NO3)2, 4 moles of NO, 6 moles of NO2, and 6 moles of H2O, while maintaining the given ratio of NO to NO2 (2:3).

To learn more about moles, refer below:

https://brainly.com/question/26416088

#SPJ11

The coupling of the diazonium salt with phenol or an aromatic amine occurs at the para position due to the activating nature of the substituents on the aromatic ring. It allows for the full delocalization of the positive charge generated by the diazonium salt.

The para position is in the same plane as the nitro group, which stabilizes the positive charge by resonance. This results in a more stable product, as the positive charge is delocalized over the full conjugated system of the aromatic ring. Additionally, the para position allows for optimal steric interactions between the reactants, which further promotes the formation of the desired product.  Both phenols and aromatic amines have electron-donating groups (-OH in phenols and -NH2 in aromatic amines) that can stabilize the positive charge generated during the electrophilic aromatic substitution reaction.

The electron-donating groups activate the aromatic ring and direct the electrophilic substitution to the ortho and para positions. However, the ortho position is often sterically hindered due to the proximity of the electron-donating group, making the para position the preferred site for the coupling reaction with diazonium salts.

To know more about Para Position visit:
https://brainly.com/question/31051319

#SPJ11

The root mean square (rms) average speed of the atoms in a sample of krypton gas at 0.14 atm and -16 degree C is approximately 357 m/s.

To calculate the root mean square (rms) average speed of krypton gas, we can use the formula:
rms speed = √(3kT/m)
where k is the Boltzmann constant (1.38 x 10^-23 J/K), T is the temperature in Kelvin, and m is the molar mass of the gas.
First, let's convert the given temperature of -16 degree C to Kelvin:
-16 degree C + 273= 257K
Next, we need to find the molar mass of krypton, which is 83.798 g/mol.
Now we can plug in the values:
rms speed = √(3(1.38 x 10^-23 J/K)(257 K)/(0.08380 kg/mol)) = 357 m/s.
rms speed = 357 m/s

Therefore, the root mean square (rms) average speed of the atoms in a sample of krypton gas at 0.14 atm and -16 degree C is approximately 357 m/s.

Learn more about root mean square average speed : https://brainly.com/question/14298888

#SPJ11

The alkyl bromide, Br -OH, the major products of dehydrohalogenation is H₂O and he minor product is HBr (Hydrogen bromide).

In general, dehydrohalogenation of an alkyl bromide (R-Br) with a strong base (such as KOH) can result in the formation of an alkene (R=CH₂) and HBr. The major product is the alkene with the most substituted double bond (i.e. the one with more alkyl groups attached to the carbon-carbon double bond), while the minor product is the alkene with the least substituted double bond (i.e. the one with fewer alkyl groups attached to the carbon-carbon double bond).

Learn more about dehydrohalogenation: https://brainly.com/question/31285083

#SPJ11

No, the molecule [tex]NH_{3}[/tex]  does not have a central atom with the same hybridization as oxygen in the water.

In water ( [tex]H_{2}O[/tex] ), the oxygen atom forms two sigma bonds with two hydrogen atoms and also has two lone pairs of electrons, resulting in a tetrahedral molecular geometry. Oxygen in water has [tex]sp^{3}[/tex] hybridization, which means it has four electron domains around the central atom.

The molecular geometry of ammonia is trigonal pyramidal, with the nitrogen atom at the center and the three hydrogen atoms and one lone pair of electrons surrounding it.  [tex]NH_{3}[/tex] , on the other hand, has [tex]sp^{3}[/tex]  hybridization as well but only has three electron domains around the central atom. Therefore, the hybridization of the central atoms in [tex]NH_{3}[/tex] and water is not the same.

Therefore, while both water and ammonia have tetrahedral molecular geometries, the hybridization of the central atoms is different. The oxygen atom in water is [tex]sp^{3}[/tex] hybridized, while the nitrogen atom in ammonia is also [tex]sp^{3}[/tex]  hybridized.

To know more about Molecular Geometry:

https://brainly.com/question/29591951

#SPJ11

The intermolecular forces between hydrogen peroxide and methanol are hydrogen bonding and dipole-dipole interactions.

The intermolecular forces that act between a hydrogen peroxide (H2O2) molecule and a methanol (CH3OH) molecule are hydrogen bonding and dipole-dipole interactions. The oxygen atoms in H2O2 and CH3OH are highly electronegative, creating a dipole moment. This allows the oxygen atoms to interact with each other through dipole-dipole interactions. Additionally, the hydrogen atoms in both molecules are bonded to highly electronegative atoms, making them capable of participating in hydrogen bonding interactions.

Know more about intermolecular forces here:

https://brainly.com/question/12243368

#SPJ11

The crystallization of sodium acetate involves the process of dissolving the sodium acetate in water and then allowing it to cool down slowly.

The reaction to this process is:

NaC₂H₃O₂ + H₂O → Na+(aq) + C₂H₃O₂⁻(aq)

This process is enthalpy driven, as the heat is released when the sodium acetate dissolves in water.

The dissolving process is exothermic, meaning it releases heat energy. As the solution cools down, the solubility of sodium acetate decreases, leading to the formation of crystals. This process is known as supersaturation, and it is driven by the decrease in entropy, as the dissolved sodium acetate molecules organize themselves into a crystalline structure. Therefore, although the process is both enthalpy and entropy-driven, it is mainly enthalpy-driven.

Learn more about enthalpy driven at https://brainly.com/question/9289582

#SPJ11

I has more electrons than I, although having the same number of protons, when comparing their sizes. Because of this, l has a smaller Zeff than l, which results in ions.

An isoelectronic comparison refers to the measurements of atoms or ions with the same number of electrons but differing nuclear charges. When ion channels in the membrane open or close, it causes depolarization and hyperpolarization by changing which kinds of ions can enter or exit the membrane. However, it was recognised that atoms carry equal amounts of positive and negative charge, meaning that their net charge is zero. This property is known as electrical neutrality.

To know more about electrons, click here:

https://brainly.com/question/1255220

#SPJ4

An alpha helix that is 24 å long contains approximately 16 amino acids. An alpha helix is a common secondary structure in proteins, where the polypeptide chain is coiled like a spring.

The length of an alpha helix is typically measured in angstroms (å). It is known that one complete turn of the helix covers a distance of 5.4 å, and there are approximately 3.6 amino acids per turn.

Using these measurements, we can calculate the number of amino acids in an alpha helix that is 24 å long. First, we divide 24 å by 5.4 å per turn, which gives us 4.44 turns. Then, we multiply 4.44 turns by 3.6 amino acids per turn, which gives us 16 amino acids.

It is important to note that the actual number of amino acids in an alpha helix may vary slightly, as the exact length of the helix can be influenced by factors such as the specific amino acids involved and the presence of other protein structures.

Nonetheless, the above calculation provides a good estimate of the number of amino acids in a typical alpha helix.

To know more about polypeptide chain refer here:

https://brainly.com/question/6426934#

#SPJ11

According to the rule of conservation of mass, mass does not change during a chemical reaction. answer is False.

A chemical reaction cannot create or remove mass (matter), according to the Law of Conservation of Mass.

Therefore, the combined mass of all the components in a chemical reaction should be the same as the combined mass of all the elements in the reactants.

In other words, the ratio of atoms of each element present in the reactants to those present in the products must be the same.

An object's mass is an intrinsic property, which means it is a component of the thing's structure and cannot be altered without altering the object itself. The measure of an item's resistance to a change in motion or direction, mass can also be thought of as the amount of inertia a thing has.

To  learn more about Mass, visit:

brainly.com/question/24191825

#SPJ1

The complete question is,

Write true or false. Correct the false statement.

The law of conservation of mass states that mass is created during a chemical reaction.

The correct answer is D.

This is because the dissociation of hydrogen is an endothermic reaction, meaning it requires energy to break the bond between the two hydrogen atoms. Therefore, it will not be spontaneous at any temperature, as energy must be supplied in order for the reaction to occur.

To know more about an endothermic reaction:

https://brainly.com/question/23184814

#SPJ11

The molecular formula of a compound with the molar mass of 104 g/mol and an empirical formula of CH is C₈H₈.

To calculate the molecular formula of a chemical with a molar mass of 104 g/mol and an empirical formula of CH, discover the ratio of the empirical formula mass to the molar mass and multiply the empirical formula by this ratio. CH has an empirical formula mass of 13 g/mol (1 carbon atom weighing 12 g/mol + 1 hydrogen atom weighing 1 g/mol).

The ratio of the molar mass to the empirical formula mass is 104 g/mol ÷ 13 g/mol = 8. Therefore, we can multiply the empirical formula by 8 to get the molecular formula, C₈H₈. Thus, the molecular formula of the compound is C₈H₈.

To know more about empirical formula, visit.

https://brainly.com/question/1603500

#SPJ4

The pH of the solution prepared by adding 2.0 mL of 0.020 M NaOH to 10.0 mL of water is approximately 11.52.

The pH of the solution can be calculated using the following steps:

1: Calculate the moles of NaOH added.

Moles of NaOH = concentration of NaOH × volume of NaOH added

Moles of NaOH = 0.020 M × 0.0020 L = 4.0 x 10⁻⁵ moles

2: Calculate the total volume of the solution.

Total volume of solution = volume of water + volume of NaOH added

Total volume of solution = 0.010 L + 0.0020 L = 0.012 L

3: Calculate the concentration of hydroxide ions (OH-) in the solution.

Concentration of OH- = moles of NaOH / total volume of solution

Concentration of OH- = 4.0 x 10⁻⁵ moles / 0.012 L = 3.33 x 10⁻³ M

4: Calculate the pOH of the solution.

pOH = -log[OH-]

pOH = -log(3.33 x 10⁻³) ≈ 2.48

Step 5: Calculate the pH of the solution.

pH = 14 - pOH

pH = 14 - 2.48 ≈ 11.52

You can learn more about pH at: brainly.com/question/15289714

#SPJ11

Yes, it is possible for fatty acid chains to be broken down to produce ATP in the absence of oxygen. This process is called anaerobic respiration or fermentation.

During anaerobic respiration, the fatty acid chains are broken down into smaller molecules, such as acetyl-CoA, which enters the Krebs cycle to produce ATP. However, the amount of ATP produced through anaerobic respiration is much less compared to aerobic respiration. In the absence of oxygen, the breakdown of fatty acids involves:

1. Beta-oxidation: Fatty acid chains undergo beta-oxidation in the mitochondria, where they are broken down into two-carbon units called acetyl-CoA. This process also generates NADH and FADH2, which are electron carriers.

2. Anaerobic glycolysis: Since there is no oxygen available, the acetyl-CoA cannot enter the citric acid cycle (TCA cycle) for further oxidation. Instead, the cell relies on anaerobic glycolysis, which converts glucose into pyruvate and generates a small amount of ATP.

3. Fermentation: Pyruvate is then converted into lactate in a process called fermentation. This regenerates NAD+ from NADH, allowing glycolysis to continue and producing additional ATP.

Although fatty acid chains can be broken down to produce ATP in the absence of oxygen, this process is less efficient compared to aerobic metabolism, which involves the citric acid cycle and the electron transport chain, both of which require oxygen and generate a larger amount of ATP.

More on fatty acids: https://brainly.com/question/6761923

#SPJ11