Answer:
B)because otherwise the packets will bounce back and forth from end to end repeatedly
Explanation:
Bus topology can be regarded as a kind of topology for a Local Area Network, it is one that has it's nodes connected to a single cable(backbone) and any break in the so called backbone, there will be failure in the entire segment. However a Terminator is usually attached to the end-points of a bus network so that the signal is absorbed by the Terminator and as a result of this the signal will not reflect back down the line. If there is no Terminator there would be bouncing back and forth of packet in an endless loop.It should be noted that a bus topology require a terminator because otherwise the packets will bounce back and forth from end to end repeatedly
.
The answer is-
B.) because otherwise the packets will bounce back and forth from end to end repeatedly
Bus topology can be regarded as a kind of topology for a Local Area Network, it is one that has it's nodes connected to a single cable(backbone) and any break in the so called backbone, there will be failure in the entire segment. However a Terminator is usually attached to the end-points of a bus network so that the signal is absorbed by the Terminator and as a result of this the signal will not reflect back down the line. If there is no Terminator there would be bouncing back and forth of packet in an endless loop.It should be noted that a bus topology require a terminator because otherwise the packets will bounce back and forth from end to end repeatedly
function for cell range F1 to F5
Answer:
The correct answer to this question is given below in the explanation section.
Explanation:
An essential skill in Excel is to know how to determine the range of values in Excel for Excel users. Maybe you don't have time to waste sorting through rows and columns in order to find the lowest and highest values of sales, revenue, or other finance-related information, etc. The range in Excel, the difference between the highest and lowest value helps in making accurate decisions, forecasting, and budgeting.
To find the minimum and maximum, you can use the following functions.
To determine the range for Cell F1 to F5 is given below:
To find the minimum, you can use this function: =MIN(F1:F5)
To find maximum, you can use this function: =MAX(F1:F5)
If you want to find the highest and lowest values for the example sale amount, you can use the following formulas.
To find the lowest, you can use this function:=SMALL(F1:F5,1)
To find the next lowest, you can use this function:=SMALL(F1:F5,2)
To find the third-lowest, you can use this function:=SMALL(F1:F5,3)
To find the highest, you can use this function: =LARGE(F1:F5,1)
To find the next highest, you can use this function: =LARGE(F1:F5,2)
To find the third-highest, you can use this function: =LARGE(F1:F5,3)
Assume: itemCost = input(“Enter cost of item: “) Write one line of code that calculates the cost of 15 items and stores the result in the variable totalCost
itemCost = input("Enter cost of items: ")
totalCost = 15 * float(itemCost)
print(totalCost)
The first line gets the total cost of the item from the user. The second line calculates the cost of 15 of those items and stores that value in the variable totalCost. The last line is just to test that our calculation works. I hope this helps!
One line code that calculates the cost of 15 items and stores the result in the variable total cost is written below.
What is coding?We connect with computers through coding, often known as computer programming. Coding is similar to writing a set of instructions because it instructs a machine on what to do. You can instruct computers what to do or how to behave much more quickly by learning to write code.
itemCost = input("Enter cost of items: ")
totalCost = 15 x float(itemCost)
print(totalCost)
The user is asked for the item's total cost on the first line. The cost of 15 of those things is calculated in the second line and is stored in the total cost variable. The final line merely serves as proof that our math is correct.
Therefore, the one-line coding is written above.
To learn more about coding, refer to the link:
https://brainly.com/question/29906210
#SPJ2
the ____number system is base 10
Answer:
The correct answer to this question is given below in the explanation section.
Explanation:
This is a fill-in-blank question.
The answer is:
The decimal number system is base 10.
In our everyday life, we use a number system that is a Base-10 system. As we know that the base-10 is known as the decimal system and this number has 10 digital starting from 0 to 9 such as:
0,1,2,3,4,5,6,7,8,9
We use this number system in our daily accounting and in daily life and it is a base-10 number system. This number system uses 10 as its base number so it is called a base-10 system. It is also called the decimal number system.
Serena is adding headers and footers in the Slide Master view using the Header and Footer dialog box What is not
an option on the Slide tab to be included in the header and/or footer?
Slide Number
O Date and Time
O Company Logo
O Don't Show on Title Slide
Answer:
NUMBER 3
Explanation:
Answer:
it is c
Explanation:
Put the steps in order to produce the output shown below. Assume the indenting will be correct in the program.
5 2
5 3
8 2
8 3
plz help ill give brainliest
Answer:
for numB in [5,8]:
for numA in [2,3]:
print(numB, numA)
Explanation:
Looking at the given output it can bee sent that the first numbers are repeated twice consecutively and the second numbers in a sequence.
This means that nested loops are used.
Assuming that the indentation will be correct in the program
The code in squence is:
for numB in [5,8]:
for numA in [2,3]:
print(numB, numA)
Answer:
Line 1: for numB in [5,8]
Line 3: print (numB, numA)
Line 2: for numA in [2,3]
Explanation:
Only text values can be displayed as a part of <TD> and <TH> tags.
True or False?
Answer:
I'm not sure but I think its true
If a file is being downloaded from various computers and not just one network computer or server, it is being downloaded the _____ way.
B2C
B2B
P2P
P2B
What type of file format is PSD?
Answer:
PSD (Photoshop Document)
Explanation:
PSD (Photoshop Document) is an image file format native its one of Adobe's popular Photoshop Application. PSD files are commonly used for containing high quality graphics data.
Answer:
PSD (Photoshop Document) is an image file format native to Adobe's popular Photoshop Application. It's an image editing friendly format that supports multiple image layers and various imaging options. PSD files are commonly used for containing high quality graphics data.
Format Creator: Adobe Inc.
Explanation:
what are the parts of plants that store most stach ?
A. Roots, Leaves and Seeds
B. Seads, Roots and Leaves
C. Seeds, Roots and Tubers
D. Tubera, Seeds and Leaves
Answer: A. Roots, Leaves and Seeds
Explanation:
Starch is produced in plants through the process of photosynthesis. The energy that is gotten from the rays of the sun during photosynthesis is stored by plants so that they can use it later.
Plant store starch in the roots. An example is potato. Others store it in their leaves and seeds as well. Therefore, the parts of plants that store most starch are the roots, leaves and seeds.
The correct option is A.
today food is produced and transported all over the world. name some pros and cons of it.
Answer:
Waste and left
Explanation:
Why is simplicity important in navigation design?
A. It provides users with more choices and control.
B.
It makes navigation easy to understand.
C.
It reduces the load on the user's memory.
D.
It makes the design more attractive.
What techniques can be used to assess a product?
Answer:
well
Explanation:
When describing methods used to assess student achievement of the 1. Include sources of data, collection methods 2. State whether they are direct or indirect instruments. 3. Describe how data was analyzed and evaluated.
Two forms of compression are lossy and lossless. State giving reasons which
would be the most suitable form of compression to use when transmitting:
(i) a draft manuscript for a book.
(ii) A video recording which you have made of the school play.
Answer:
(i) When transmitting a draft manuscript for a book, the lossless compression technique is most suitable because after decompression, the data is rebuilt and restored in its form as it was from where it originated
(ii) When transmitting a video recording which you have made of the school play, a lossy compression technique is most suitable because the large size of video files require the increased data carrying capacity which is provided by the lossy transmission technique. The quality of the video can be reduced without affecting the message intended to be delivered
Explanation:
BRAINLIESTTTT How does a project manager evaluate the scope of a project?
Determine the overall work that needs to be completed to deliver the desired product, service, or end result
Estimate some of the resources that are needed to deliver the desired product, service, or end result
Evaluate the time it will take to deliver the desired product, service, or end result
Guess how much money it will cost to deliver the desired product, service, or end result
Answer:
The first choice
Explanation:
I took the test and that was the correct answer
Hope it helped!
Select the correct answer. What do bureaucrats do on a wiki website? A. Settle disputes between users. B. Manage the wiki's infrastructure. C. Add or remove editors of a wiki. D. Assign or remove administrator rights on wikis.
Answer:D ,Assign or remove administrator rights on wikis.
Explanation:
Another term that describes the preconditions and postconditions associated with a method is
Select one:
a. contract
b. rubrik
c. exception
d. outcome
Answer:
Answer option C: Exception.
Explanation:
Should be the correct answer.
Brenda typed a few lines on a word processor. She then pressed F7 key to proofread her file. What type of key did Brenda press?
OA. function
OB. alphabetic
OC. numeric
OD. punctuation
O E. control
Pls help
Answer:
Function key
Explanation:
Given
F7 Key
Required
What does it stand for?
On a computer keyboard, the F7 key is one of the function keys.
There are 12 function keys labelled F1 to F12, each of which have designated functions.
So, from the list of given options, option A answers the question.
Analyzing other options:
Alphabetic implies A - Z in upper and lower case
Numeric implies digits 0 to 9
Punctuation implies punctuation marks such as . , ; : etc.
Control implies the ctrl key
Answer:
aa
Explanation:
A ball is at rest on top of a roof of a car.
Answer:
When it is in frictional force or in the action of movement varies the speed and if it will stop
Explanation:
If a object is in action a out side force is needed to make it start or stop
What is unique about a dual-axis chart?
O Data is coded with two different colors.
O Data is charted by two different types of data.
O The information on the axis has two different fonts.
x One set of data is shown two different ways
Answer:
B: data is charted by two different types of data.
Explanation:
Got it correct in edge.
Answer:
B) Data is charted by two types of data.
Explanation:
Is this statement true or false? Factual data is always the best data because it is based on facts. true false
Answer:
The statement is true
Explanation:
In order to sell a new product to a store owner, taking the store owner into trust is the most important stage. We must provide proper details and the proofs that our product will make his business more effective. All of the above statements are part of the deal and they can be used to assure the store owner that the product we are selling to him is trustworthy.
HELP!! I keep getting an EOFError on line 6 while trying to run my code in python.
my code-
line 1: num = int(input("Enter a number: "))
line 2: c=0
line 3: sum=0
line 4: while (num<100):
line 5: sum=sum+num
line 6: num = int(input("Enter a number: "))
line 7: c=c+1
line 8: print("Sum: " +str(sum))
line 9: print("Numbers Entered: "+str(c))
I'm almost certain you were getting an EOF error because you were asking for too much input. My code works for me. Best of luck.
give some examples where military needs have influenced technological development
Answer:
Satellite Systems,
Autonomous Vehicles
State ONE (1) disadvantage of using computers to store and process
information.
Answer:
it can be hacked
Explanation:
there is always a chance for computer data to be hacked
Which one Bc I’m struggling
Answer:
c
Explanation:
What tag works as a dictionary between text & computer bytes?
Answer:
Here is some python code
Explanation
write a code to test if a number is equal to 89 or 78
number = whatever value you want
if number == 89 or number == 78:
print("The variable number equals 89 or 78.")
else:
print("The variable number does not equal 89 or 78.")
What term is commonly used to refer to HTML formatting?
Answer:
<html> or </html>
how do you make a triangle on art.kano.com
Umm, I guess you just try to do one? I don't know.. Sorry if I couldn't help out.
I believe you can do it!
Answer: I would watch a YouT-ube video on a tutorial on doing that
But i am pretty sure it involves coding
Explanation:
what is the correct value of x in the equation 3=⅛×
Answer:
x=24
Explanation:
3=1/8x
3*8 = 8(1/8)x - multiply 8 on both sides to cancel the fraction
3*8 = x - multiply 3*8 to get x
x = 24
Now imagine that the smart watches have been purchased for all employees. A company wellness program has been set up to encourage employees to use their smart watches to monitor their fitness activities both in and out of the office. The company views this program as a success and wants to keep it running. You now need to consider how you will be able to maintain upgrades for this program.
Explanation:
Analyzing the scenario of the question above and the information about the success of the organization's wellness program, it is necessary that for the program to remain updated and bringing significant benefits to the company, project program management must be carried out, that is, control and maintenance of the variables that make up the program.
For this, it is necessary to analyze and develop effective management actions so that the program continues to achieve its goals. It is necessary to align the program's objectives to organizational planning, managing its life cycle, eliminating possible restrictions and finding solutions.
It is also necessary to include a management of the benefits of the program, the management of the stakeholders, etc., so that the program continues to have the results expected in the organization.