Which reaction type is really part of another type of reaction but treated separately? Explain

Answers

Answer 1

Answer:

Oxidation - reduction reaction which is called redox reaction.

Explanation:

The type of reaction that is a part of another type but treated separately is called Oxidation - reduction reaction.

Thus is because they usually involve 2 separate half reactions which are oxidation reactions that involve loss of electrons and then reduction equations which involve gain of electrons.

They are treated separately for example when sodium reacts with chlorine to form sodium chloride.

2Na + Cl2 = 2NaCl

Now, sodium undergoes oxidation by loosing elctrons and it's half reaction is;

2Na → 2Na​^(+) + 2e^(-)

​​Meanwhile chlorine undergoes reduction by gaining electrons and its half reaction is;

Cl2 + 2e^(-) → 2Cl^(-)


Related Questions

1.
What is the molarity of a 3.6 L solution with 104 g of sucrose?

Answers

Answer:

.084 M

Explanation:

Molar mass of sucrose = 342.3

The formula to find molarity is moles of solute / liters of solution

Since we need to turn grams to moles for this equation we do 104 / 342.3 = 0.304

Now we can use the equation listed above. .304 / 3.6 = 0.084 M

What does Aluminum and Magnesium oxide create

Answers

Answer: MgAl2O4 or Spinel (gemstone)

Explanation:

It should create Spinel!

A 50.00 L sample of gas collected in the upper atmosphere at a pressure of 18.30 torr is compressed into a volume of 0.1500 L. What is the final pressure?

Answers

Answer:

the ans is in the picture with the steps  

(hope it helps can i plz have brainlist :D hehe)

Explanation:

The concept Boyles law is used here to determine the final pressure of the gas. Boyle's law was put forward by the Anglo-Irish chemist Robert Boyle in the year 1662. The final pressure of the gas is  7.66 atm.

What is Boyles law?

At constant temperature, the volume of a given mass of gas is inversely proportional to its pressure. It can also be explained as at constant temperature, the product of pressure and volume of a given mass of gas is constant.

A straight line graph is obtained when pressure is plotted against the inverse of the volume.

Mathematically the law can be expressed as:

V∝ 1/P

PV = k (Constant)

Here 'V' is the volume and 'P' is the pressure of the gas.

For two different gases, the equation is given as:

P₁V₁ = P₂V₂

P₂ = P₁V₁ / V₂

1 torr = 0.00131 atm

P₁ = 0.023 atm

0.023 × 50.00  / 0.1500 = 7.66 atm

Thus the final pressure is 7.66 atm.

To know more about Boyles law, visit;

https://brainly.com/question/30367133

#SPJ2

How many liters of O2 would be needed to produce 5.75 moles of K₂O?​

Answers

Answer:

just 1

Explanation:

Calculate the number of water (H2O) molecules produced from the decomposition of 75.50 grams of Iron (III) hydroxide (Fe(OH)3).

Answers

Answer: [tex]6.38\times 10^{23}[/tex] molecules of water are produced.

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} Fe(OH)_3=\frac{75.50g}{106.8g/mol}=0.707moles[/tex]

The balanced chemical reaction is:

[tex]2Fe(OH)_3\rightarrow Fe_2O_3+3H_2O[/tex]  

According to stoichiometry :

2 moles of [tex]Fe_2O_3[/tex] produce = 3 moles of [tex]H_2O[/tex]

Thus 0.707 moles of [tex]Fe_2O_3[/tex] will produce=[tex]\frac{3}{2}\times 0.707=1.06moles[/tex]  of [tex]H_2O[/tex]  

According to avogadro's law, 1 mole of every substance contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

Thus 1.06 moles of [tex]H_2O[/tex] contains = [tex]\frac{6.023\times 10^{23}}{1}\times 1.06=6.38\times 10^{23}[/tex] molecules

Answer:

6.381 x 10^23

Explanation:

Which sentence best describes the relationship between genes and chromosomes?
A.
Genes are found within chromosomes.
B.
Several chromosomes make up one gene.
C.
Genes and chromosomes are the only things that form the nucleus.
D. Several genes are attached to different parts of the Golgi apparatus.

Answers

Answer:

A

Explanation:

What does the area between points D and E represent for the substance on the heating curve below?
A freezing point
B melting point
C boiling point
D sublimation point

Answers

Answer:

C. Boiling Point

Explanation:

A to B represents heat being added to the substance in a solid state, making B to C the melting point. C to D represents heat being added to the substance in a liquid state, making D to E the boiling point as the liquid is converted to a gas.

Hope this helps!

C. boiling point hahashhshddhdbvfbb for more words have a nice day

how to calculate density (what’s the formula)
density=_ divided by _

Answers

Answer:

density equals weigt divided by volume

Explanation:

[tex]density = \frac{m}{v} [/tex]

How is the motion of particles in a book different from the motion of particles in the air around it ? (dont put link)​

Answers

Answer:

the motion is different.

Explanation:

the the motion is different because the particle in a book is solid particles and solid are packed together so so they can't move freely but while the the particles in the air around it is gas particles and it are packed very loose and can move very easily anywhere like .Example - solid-book , eraser. gas-helium, oxygen.

Which measurable property of potassium can be used to support this statement: "Matter can be subdivided to the atomic level while retaining its defining characteristics."

A. Temperature
B. Density
C. Mass
D. Volume

Answers

C i think is the correct answer

An elastic band with a spring constant of 62 N/m is extended by 0.15 m. What is the force applied to the rubber band?

Answers

Answer:

the force applied to the rubber band is -9.3N

Explanation:

The computation of the force applied to the rubber band is shown below;

We know that

Force in newtons = Spring constant × amount of extension

F = -k × x

where

-k = 62 N/m

And, x = 0.15m

So, the force applied is

= -62N/m × 0.15m

= -9.3N

hence, the force applied to the rubber band is -9.3N

the force applied to the rubber band is -9.3N

Explanation:

Tetrachloroethene, C2C14 is a solvent used in many dry cleaning processes.
Write the empirical formula for tetrachloroethene.

Answers

An empirical formula presents the atoms of all the elements with the most simplified whole number ratios. In other words, divide each subscript by their greatest common factor.

The greatest common factor of 2 and 4 is 2.

2/2 = 1

4/2 = 2

So, the empirical formula for tetrachloroethene is CCl₂.

Is a shrimp an arachnid?
is a pill bug a insects, arachnid, or crustaceans?
is a scorpions a insects, arachnid, or crustaceans?

Answers

Answer:

Insects belong to the class Insecta, and arachnids to the class Arachnida; both classes fall under the Arthropoda phylum, along with crustaceans (crabs, lobster and shrimp). All arthropods have an exoskeleton and jointed legs. They have segmented bodies and appendages, which are divided into different segments. Arachnids belong to an even larger group of animals called “arthropods” which also include insects and crustaceans (lobster, crabs, shrimp, and barnacles).

Explanation:

2. Which number in a chemical formula tells you how many molecules of
an element or compound you have? *

A. Coefficient

B. Chemical symbols

C. Subscript

D. Capitals

Answers

I think the answer is C2H6O

An unknown mass of Al absorbs 187.9 J of heat and increases its temperature from 23.5 °C to 35.6 °C. What is the mass of the
aluminum?
Where:
Specific Heat of Aluminum is = 0.900 J/gºC

Answers

Answer:

mass = 17.2 grams

Explanation:

q = mcΔT => m = q/cΔT = 187j / (0.90j/g°C)(35.6°C - 23.5°C) = 17.2g

What is required to make a fire? Is it exothermic or endothermic?

Answers

Answer:

Combustion as an Exothermic Reaction

Explanation:

When substances burn, they usually give off energy as heat and light. The combustion of wood is an exothermic reaction that releases a lot of energy as heat and light.

Answer:

Exothermic

Explanation:

because exothermic causes fires while endothermic doesn't

why does hexane have the weakest intermolecular force?

Answers

Answer:

The only intermolecular forces present in the compound Hexane are London dispersion forces which are generally the weakest. Hexane's molecular structure proves that Dipole-Dipole forces wont exist as there aren't very polar bonds in the structure.

Calculate the volume in mL of 53.2 g of .251M solution of HCl.
Show work please

Answers

Answer:

5.813 mL

Explanation:

You need to use the formula : vol = mass / molar mass x molarity

the molar mass of HCl is 36.46 and the problem gives you the rest of the equation

0.251M x 36.46 = 9.151

53.2g / 9.151 = 5.813 mL

*I don't know some of the units so that's why some of them are blank sorry

*I'm also sorry if this is wrong but it's what I did so..

HELP!
NaCl is made from 1 Na and 1 Cl. If I have 45.978 grams of Na, how many grams of NaCl can I make? (You will have to convert to moles of Na first!)
explain answer​

Answers

Answer:

116.88 g

Explanation:

Step 1: Write the balanced equation for the synthesis of NaCl

Na + 1/2 Cl₂ ⇒ NaCl

Step 2: Calculate the moles corresponding to 45.978 g of Na

The molar mass of Na is 22.990 g/mol.

45.978 g × 1 mol/22.990 g = 1.9999 mol

Step 3: Calculate the number of moles of NaCl formed from 1.9999 moles of Na

The molar ratio of Na to NaCl is 1:1. The moles of NaCl formed are 1/1 × 1.9999 mol  = 1.9999 mol.

Step 4: Calculate the mass corresponding to 1.9999 moles of NaCl

The molar mass of NaCl is 58.443 g/mol.

1.9999 mol × 58.443 g/mol = 116.88 g

Use the following equation to answer the questions that follow.

Fe + 2 HCl --> FeCl2 + H2

a. If you have 3.000 moles of HCl, how many moles of gas could you make?

b. If you have 6.132 moles of each reactant, which one will run out first?

c. Based on your answer from (b), how many grams of FeCl2 would you expect to make?

d. How many moles of Excess Reactant reacted based on (b)?

e. How much Excess Reactant is left over, in moles, from (b)?

f. When actually carrying out the experiment with 6.132 moles of each reactant, you make 310.2grams of iron(II) chloride. What is your percent yield?

Answers

Sksklerodlekmdndleoeojfnfroror



True or False: Strong HYDROGEN bonds cause surface tension.
Choose

True or False: Many polar substances are soluble in water.

True or False: Cohesion and adhesion contribute positively to the capillary action property of water.

True or False: Water's molecular shape is trigonal planar.

True or False: Most water on earth is found in the liquid form.

True or False: Surface Tension makes it possible for some insects to walk
on water.

True or False: Capillary action is how tall trees get water from the leaves TO the roots.

True or False: Water has the density of 1.0 g/mL.

True or False: Water does not change temperature easily."

True or False: Water is highly polar.

True or False: Adding soap to water increases surface tension.

True or False: Evaporation and Vaporization are the same thing."

True or False: Nonpolar substances are NEVER soluble in water."

True or False: Water is an example of an strong IONIC bond..

True or False: The solid phase of water (ice) is more dense than the liquid
phase of water.

Answers

True TrueTrueFalseFalseTrueTrueTrue FalseFalse TrueFalseFalse

How is pascals law used in the brakes of a car?

I’m giving 67 points!

Answers

Answer:

A change in pressure at any point in an enclosed fluid at rest is transmitted undiminished to all points in the fluid. With that said; in a hydraulic brake system, if the piston in the master cylinder(the part your foot pushes on) is one inch square area and you push with 100 pounds, then 100 pounds per square inch is transmitted to all parts of the hydraulic system. Now if the brake caliper piston(the part that pushes against the brake pad) is 2 square inches then there will be a total of 200 lbs of force being applied by the wheel cylinder, because each square inch has 100 pounds pushing on it. This is basically how cars brake systems are designed in order to reduce the amount of force required by the driver.

Btw if u want to give 67 points u must multiply that by 2 since two people answer and they get half of 67.    Im still happy with my 34 though!

1. Identify the reactants in this chemical equation:
2H2 + O2 + 2H2O

Answers

Oxygen and hydrogen

What are the 3 main types of clouds?

Answers

Answer:

Cumulus, Cirrus, and Stratus

Explanation:

So Cumulus Clouds are those puffy-shaped clouds, the ones that look the most solid like you could just walk on them.  Cirrus are those wispy clouds that are often very high up.  And Stratus Clouds are the low clouds that often cover the entire sky.

hope this helps:)

A woman needs a kidney transplant. The best candidate to donate a kidney to her is her
es -0)
A)
Co-Worker.
B)
daughter.
09
friend.
D
husband.

Answers

Answer: B

Explanation:

In a nuclear power plant, what is the purpose of the cooling tower?

cools down the electric generator
reduces heat pollution to the environment
pumps cool water into the reactor

Answers

Answer:

reduces heat pollution to the environment

the charge of the atom is​

Answers

Answer:

the charge of an atom is zero.

Explanation:

i hope this is what you were asking for.

Please help i need help with this (if you can’t see the last one it says thermal)

Answers

Answer:

it would have sound a

thermal .why a train needs coal and coal get burned by heat that is thermal energy and sound beacuse a train makes sound by moving

Explanation:

have a good day /night

may i please have a branlliest

Which of the following represents an increase in kinetic energy?
A. Cooling steam from 165°C to 100°C
B. Melting 45g of ice
C. Condensing 60g of steam
D. Heating ice from -50°C to 0°C

Answers

Answer:

C

Explanation:

PLEASE HELP
Find the kinetic energy of the horse using KE=1/2mv^2.

Answers

Answer:

78878

Explanation:

Other Questions
Solve for X in the attached picture. Chinas one child policy resulted in?Gender inequalityLarger familiesWorking age population declining BRAINLIEST PLEASE HELP ASAP DO NOT ANSWER UNLESS YOU KNOW AND DON'T GIVE ME A LINK OR I WILL REPORT YOU1. Explain what type of lever is a baseball bat and why the bat is that type of lever in relation to the input force, output force, and fulcrum.2. Explain for which class of lever is the output force always greater than the input force.3. Explain for which class of lever is the output force always less than the input force.4. Use the law of conservation of energy to explain why in a second class lever the distance over which the input force is applied is always greater than the distance over which the output force is applied.5. A lever has an IMA of 4. If the length of the length of the input arm is 1.0 meter, what is the length of the output arm. The Petri dish shown has no lid. What is the surface area of the outside of the Petri dish? Round to the nearest tenth. A cylindrical-shaped Petri dish with a radius of 50 millimeters and a height of 15 millimeters. Use the given graph to determine the limit, if it exists. What is 1+1=I will give brainlist Is homemade dough the same as homemade dough for pizza Question 2True or false. In a parallel circuit the current remains the same everywhere.A.FalseB. True Using all my points for this. Sorry for making somebody have to do this but I have to do some other homework on the side that I need completed by today so I can't afford lose any time so please it would be a big help if somebody did this! Thank You! Why was Maryland the most important state in the Civil War?A: It controlled key sections of the Mississippi River needed to transport goods.PLEASE ANSWER QUICK I WILL MARK BRAINLIEST I PROMISEB: It is close to the key city of Philadelphia where most major important decisions of the time were made.C: It had control of the Ohio River which was needed for transporting goods.D: It contained Washington DC which meant that if it seceded, it would surround the nation's capital. I need help with all of this Using = 3.14, what is the circumference of a circle with a diameter of 5.5 units?Round your answer to the nearest hundredth. What is the Effect size of 1 million children effected by divorce A line,y = mx +b, passes through the point (4,-3) and isparallel to y = 12 +3. What is the value of b?1 The mean age at which the population of babies first stand without support is normally distributed with a mean of 13.20 months with a standard deviation of 2.00 months. What is the probability of randomly selecting a sample of 25 children who stood on their own by the average age of 12.2 months or earlier Find the perimeter of a quadrilateral with vertices at C (2, 4), D (1, 1), E (5, 0), and F (3, 4). Round your answer to the nearest hundredth when necessary. Select the sentences from "Marigolds" that best supports how children struggle with compassion. Which of these countries is in West Africa?EgyptIranSouth AfricaGhana Factor 1/2 out of 1/2x+6. give proof and show work and ill give brainliest