Which of the following is NOT one of the three layers that terrestrial worlds have?

Core


Crust


Mantle


Seismic zone

Answer:

The relative electronegativity of the two bonded atoms determines the polarity of a bond. If the difference in electronegativities between the two atoms is less than 0.4, the bond is nonpolar covalent. ... If the difference in electronegativities between the two atoms is more than 2.0, the bond is ionic.

The property of water that is not critical to biological life is surface tension.

Biological life means the life in which living organism do exist and for their survival they mainly depends on water and air.

The main critical properties that water should posses to biological life are density, temperature, cohesive force and adhesive force. Viscosity is also understand by the cohesive force because more attraction between atoms more viscous they are.

Hence option (1) is correct i.e. surface tension.

To know more about surface tension, visit the below link:
https://brainly.com/question/806204

Answer:

Explanation:

The temperature will only move the average velocity of all the molecules in the room. There is a limitation. The O2 molecules are heavier than the N2 molecules. The lighter the molecules, the faster they are going to move on average.

Answer:

Explanation:

The limiting reactant (or limiting reagent) is the reactant that gets consumed first in a chemical reaction and therefore limits how much product can be formed.

Answer:

A water molecule displays polarity by having negative and positive ends. Due to this charge difference, a water molecule is called a dipole.

Explanation:

Answer:

because it may cause burn that causes acid to build up which causes you to keep having an upset stomach

Answer:

Look below

Explanation:

Nitrogen: N

Phosphorus: P

Bromine: Br

Zinc: Zn

Potassium: K

Magnesium: Mg

Hope this helps(would be very grateful if you mark this answer branliest bc i need for lvl up)

Answer:

Yes, I think.

Explanation:

You cannot make an emergency door if you cannot open it easily. So if there is an emergency you need to be able to go threw it fast. So if there is a fire and you needed to just get out of there through the emergency door, just open it and you can get out.

The gates of an emergency exit must be easily opened in case of an emergency to let people out of the building.

It is required that building ought to have an emergency exit. The emergency exit is a door that can easily be opened so that people can leave via that door.

Hence, the gates of an emergency exit must be easily opened in case of an emergency to let people out of the building.

Learn more about emergency exit: https://brainly.com/question/4206267

Answer:

Some examples include maps and globes. Conceptual Models - These models serve as a tool to piece together a variety of concepts together so that we can better conceptualize the phenomena under investigation.

Scientific models are used to explain and predict the behaviour of real objects or systems and are used in a variety of scientific disciplines, ranging from physics and chemistry to ecology and the Earth sciences

Answer:

2C8H18 + 25O2 -> 16CO2 + 18H2O

(16C, 36H, 50O)

H2O requires 2H per H2O, Meaning that you'd have 9H2O's from 1C8H18, but you still need that O2 for the CO2 and because the reactant side has 8C (within C8H18) You'd have to times the amount of required O2 from CO2 by 8. Even then you still don't have enough for both CO2 and H2O so you'll have to multiply MORE causing a bigger chain reaction resulting in 2C8H18 + 25O2 -> 16CO2 + 18H2O

Answer:

hereeee

Explanation:

Limitations to population growth are either density-dependant or density-independent. Density-dependent factors include disease, competition, and predation. Density-dependant factors can have either a positive or a negative correlation to population size.

Answer: environmental factors

Explanation:

Answer:

8.95 g

Explanation:

First we calculate how many ZnCl₂ moles reacted, using the given concentration and volume:

Then we convert ZnCl₂ moles into Zn(OH)₂ moles [ Zn(OH)₂ is the precipitate, as it is the solid]:

Finally we convert 0.090 Zn(OH)₂ moles into grams, using its molar mass:

The mass of a substance is the product of the molar mass and the moles of the substance. The mass of precipitate formed in the reaction is 8.95 gm.

The mass of the substance is the weight of the compound or the molecule present in the sample.

The balanced chemical reaction is shown as:

[tex]\rm ZnCl_{2} (aq) + 2 KOH (aq) \rightarrow Zn(OH)_{2} (s) + 2 KCl (aq)[/tex]

Given,

Volume (V) of zinc chloride = 0.250 L

Molarity of zinc chloride (M) = 0.360M

Moles of zinc chloride are calculated as:

[tex]\begin{aligned} \rm moles &= \rm molarity \times volume \\\\&= 0.360 \times 0.250\\\\&= 0.090 \;\rm mol\end{aligned}[/tex]

Moles of zinc hydroxide from zinc chloride are calculated as:

[tex]0.090\;\rm mol \; ZnCl_{2} \times \dfrac{ 1\;\rm mol \;\rm Zn(OH)_{2}}{1\;\rm mol\; ZnCl_{2}} = 0.090 \;\rm mol[/tex]

Mass is calculated as:

[tex]\begin{aligned} \rm mass &= \rm moles \times molar \; mass\\\\&= 0.090 \times 99.424 \\\\&= 8.95 \;\rm gm\end{aligned}[/tex]

Therefore, 8.95 gm precipitate is formed.

Learn more about mass here:

https://brainly.com/question/13834164

Answer: True because if you leave it outside and it rains on the bike it will cause rust. Keep it in the garage or something. :) I have a bike btw.

Explanation:

The best way to prevent rusting is to store your bike safely away when it isn't being used and apply a rust-proofing lubricant to protect it when you are riding it – enjoying those wet and wild rides guilt-free!

so true

Answer:

1 million years

Explanation:

The half life of a radioactive isotope refers to the time it takes for the radioactive isotope to decay to half of its original amount.

The half life of a radioactive isotope is independent of the amount of starting material. Hence, whether the amount of starting material is small or large, the half life of the substance remains the same.

Hence the half life of 2 green marbles and 500,000 green marbles is 1 million years.

Answer:

4.254320865115cm or simplied 4.25cm

Explanation:

Answer:

10.66  grams

Explanation:

Answer:

1) Hydrogen

2) Methane

3) Carbon

4) Structural isomer

5) Ethene also known as ethylene

6) Hydrocarbons are widely used as fuel

7) Crude oil

Explanation:

Answer:

19.3g cm^3

If it deviates from the original 19.3g cm^3

Answer:

I think the answer will be number A

The boiling point of a substance is constant and for water it is 100 degree celsius. However by reducing the surrounding pressure the boiling point can be reduced.

Boiling point of a substances is the temperature at which the vapor pressure of the gas phase above the liquid equals to the atmospheric pressure where, the liquid converts to the vapor state.

Boiling point depends on the bond type, molar mass, temperature and pressure. As the and pressure increases, boiling point increases. Similarly with an increasing mass and more strength intermolecular force results in greater boiling point.

As the atmospheric pressure decreases, the temperature needed to equalise the vapor pressure of the gas phase over the liquid also decreases. Hence, boiling point decreases. Therefore, option C is correct.

To find more on boiling point, refer here:

https://brainly.com/question/28203474

#SPJ2

Answer:

Alveoli

Explanation:

I hope this helps you.

Answer:

62 grams

Explanation:

Molarity=mol/liter

We have mL and Molarity

500 mL * 1 L/1000 mL=0.5

Plug 0.5 in and solve for moles

0.75=mol/0.5

0.75*0.5=0.375 mol

Convert to grams by finding the mass of KI: 39+126.9= 165.9 grams

0.375 mol KI * 165.9 grams KI/1 mol KI= 62.2125 grams

The mass of KI needed is 124.5 grams, this can be calculated by adding the values in molarity formula.

It is defined as number of moles of solute over volume of solution in liters.

It is given by:

M = n/ V

What information do we have?

Molarity= 0.750 M

Volume = 500 mL= 1 L

Molar mass of KI = 166 g/mol

To find:

Mass of KI=?

On substituting the values:

M= n/V

0.750 M= n/ 1 L

n= 0.750 M* 1l

n= 0.750 moles

Number of moles is the ratio between mass and molar mass.

n= m/M

0.750 moles = m/ 166 g/mol

m= 0.750*166

m= 124.5 grams.

Thus, the mass of KI needed is 124.5 grams.

Find more information about Molarity here:

brainly.com/question/17138838

Answer:

25.9g

Explanation:

Molecular mass of Fe₂O₃ = (56 * 2) + (16 * 3)

                                          = 112 + 48 = 160

Let's follow the unitary method now

In 160g Fe₂O₃ , there is 112 g Fe

In 1 g  Fe₂O₃ , there is 112 / 160 g Fe

In 37  Fe₂O₃ , we need 112 * 37 / 160

= 25.9 g Fe

Answer:

D

Explanation:

hope this helps

Answer: Hello the complete question showing the sequence is attached below

answer : Option C ( cyclopropane )

Explanation:

The Major organic product obtained from the following sequence of reactions attached below is : cyclopropane

from the sequence of reactions the first product will be lithiated alkaline and it will react with Cu to form Gilman reagent while the Gilman reagent will now react with alkene iodide to form cis alkene . major organic product that would be obtained when cis alkene reacts with Simmons smith reagent will be Cyclopropane

attached below is the detailed description of the products and the major organic product

Answer:

D.  Gas X has a lower density and effuses faster than Gas Y.

Explanation:

I took the test.

Gas X has a lower density and effuses faster than Gas Y. Hence, option D is correct.

Density is the amount or the number of entities that can be contained in an area. It is denoted by ρ and is calculated as,

ρ = Mass ÷ Volume

Diffusion is the process of movement of a substance from the area of higher concentration to the area of lower concentration.

Effusion  is the process of a gas being poured out through a hole diametrically smaller than the structural exit of the container.

The gas with a smaller mass will diffuse slower in rate than the gas with a higher mass.

Hence, Gas X has a lower density and effuses faster than Gas Y.

Learn more about density here:

brainly.com/question/1563196

#SPJ5

Answer:

1. Distance  = 5 cm

Displacement = 1 cm

2. Distance = 7 cm

Displacement = 1 cm

3. Distance = 5 cm

Displacement = -1 cm

4. Distance  = 6 cm

Displacement = -2 cm

5. Distance  = 4 cm

Displacement = 0 cm

Explanation:

The distance an object travels is a measure of the total ground cobpvered bybthe object without regard to the direction of motion. It is a scalar quantity as it only takes into account magnitude but not the direction of a quantity.

Displacement however, is a measure of how far away or apart an object is from its starting position.  It a vector quantity as it takes into account both the magnitude and direction in its measurement.

From the attachment provided, considering forward direction as positive and reverse as negative :

1. When a object moves from point 1 to point 4 and reverses to point 2.:

Distance  = from 1 to 4 = 3 cm; from 4 back to 2 = 2 cm;  3 + 2 = 5 cm

Displacement = from 1 to 4 = +3 cm; from 4 back to 2 = -2 cm;  3 - 2 = 1 cm

2. When an object moves from point 1 to 5 and reverses to 2:

Distance = from 1 to 5 = 4cm; from 5 back to 2 = 3 cm; 4 + 3 = 7 cm

Displacement = from 1 to 5 = +4 cm; from 5 back to 2 = -4 cm;  4 - 3 = 1 cm

3. When an object moves from point 1 to 3 and then reverses to 0.

Distance  = from 1 to 3 = 2 cm; from 3 back to 0 = 3 cm;  2 + 3 = 5 cm

Displacement = from 1 to 3 = +2 cm; from 3 back to 0 = -3 cm;  2 - 3 = -1 cm

4. When an object moves from point 3 to 5 and then reverses to 1:

Distance  = from 3 to 5 = 2 cm; from 5 back to 1 = 4 cm;  2 + 4 = 6 cm

Displacement = from 3 to 5 = +2 cm; from 5 back to 1 = -4 cm;  2 - 4 = -2 cm

5. When an object moves from point 2 to 4 and then reverses to 3.

Distance  = from 2 to 4 = 2 cm; from 4 back to 2 = 2 cm;  2 + 2 = 4 cm

Displacement = from 2 to 4 = +2 cm; from 4 back to 2 = -2 cm;  2 - 2 = 0 cm

Answer:

2.9 psi

Explanation:

Pressure (mmHg) = 150 mmHg

Pressure (psi) =?

The pressure in pound per square inch (psi) can be obtained as follow:

51.715 mmHg = 1 psi

Therefore,

150 mmHg = 150 mmHg × 1 psi / 51.715 mmHg

150 mmHg = 2.9 psi

Thus, pressure in pound per square inch (psi) is 2.9 psi.

Answer:

The answers to your questions are given below

Explanation:

F. Determination of the missing part of the equation.

_ I₂ + _Na₂S₂O₃ —> _ NaI + _ Na₂S₄O₆

The above equation can be balance as illustrated below:

I₂ + Na₂S₂O₃ —> NaI + Na₂S₄O₆

There are 2 atoms of I on the left side and 1 on the right side. It can be balance by writing 2 before NaI as shown below:

I₂ + Na₂S₂O₃ —> 2NaI + Na₂S₄O₆

There are 2 atoms of Na on the left side and a total of 4 atoms on the right side. It can be balance by writing 2 before Na₂S₂O₃ as shown below:

I₂ + 2Na₂S₂O₃ —> 2NaI + Na₂S₄O₆

Now the equation is balanced.

The coefficients are: 1, 2, 2, 1

Elements >>> Reactant >>> Product

Sodium >>>>> 4 >>>>>>>>> 4

Sulphur >>>>> 4 >>>>>>>>> 4

Oxygen >>>>> 6 >>>>>>>>> 6

Iodine >>>>>> 2 >>>>>>>>>> 2

G. Determination of the missing part of the equation.

__ Mg + __P₄ —> __Mg₃P₂

The above equation can be balance as illustrated below:

Mg + P₄ —> Mg₃P₂

There are 2 atoms of P on the right side and 4 atoms on the left side. It can be balance by writing 2 before Mg₃P₂ as shown below:

Mg + P₄ —> 2Mg₃P₂

There are 6 atoms of Mg on the right side and 1 atom on the left side. It can be balance by writing 6 before Mg as shown below:

6Mg + P₄ —> 2Mg₃P₂

Now the equation is balanced.

The coefficients are: 6, 1, 2

Elements >>>> Reactant >>> Product

Magnesium >> 6 >>>>>>>>> 6

Phosphorus >> 4 >>>>>>>>> 4

Answer:

The frequency is 1000 cycles/s

Explanation:

An alternating current is an electrical current in which the current changes its magnitude and the sense cyclically. The frequency of this current is defined as the cycles that the current completes in one second.

As the current completes 100 cycles in 0.1 seconds, the frequency is:

100 cycles / 0.1s = 1000 cycles /s