Answer:
D) . OH−
Explanation:
Ionic compounds that dissolve in water to generate a homogenous solution are frequently formed by ions with oppositely charged charges. The forces of attraction between ions with the same charges, on the other hand, are frequently too powerful to be overcome by the forces of attraction between the ions and the water molecules, resulting in the formation of insoluble compounds. Therefore, an anion with a negative charge, such as NO3- or OH-, is the ion that is typically present in an insoluble ionic combination. Only d. OH- is an anion with a negative charge, hence it is the only one of the choices that is the right response.
Two sodium atoms react with three water molecules to produce aqueous sodium hydroxide and hydrogen gas. a. Write the balanced chemical equation (include state designations): b. Draw the molecular representations of the reaction: ке = oxygen 1 = hydrogen A = sodium After reaction Before reaction c. Which reagent is limiting? Excess?
In this case, we have 2 moles of Na and 3 moles of H2O, which means that H2O is the limiting reagent. Na is in excess, because we have more than enough to react with all of the H2O.
a. The balanced chemical equation for the reaction is:
2Na(s) + 6H2O(l) → 2NaOH(aq) + 3H2(g)
b. The molecular representations of the reaction can be shown as follows:
After reaction:
2Na + 3H2O → 2NaOH + 3H2
Before reaction:
Na + Na + 3H2O → NaOH + NaOH + 3H2
c. To determine which reagent is limiting, we need to calculate the amount of product that can be formed from each reactant. The balanced equation tells us that 2 moles of Na react with 6 moles of H2O to produce 2 moles of NaOH and 3 moles of H2. Therefore, if we have 2 moles of Na and 6 moles of H2O, we can produce 2 moles of NaOH and 3 moles of H2.
However, if we have less than 6 moles of H2O, then H2O is the limiting reagent, because we will run out of it before all of the Na is used up. If we have less than 2 moles of Na, then Na is the limiting reagent, because we will run out of it before all of the H2O is used up.
To know more about limiting reagent refer to
https://brainly.com/question/26905271
#SPJ11
determine the quantity of moles of hydrogen in 3.06 × 10⁻³ g of glycine , c₂h₅no₂
There are 2.04 × 10⁻⁴ moles of hydrogen in 3.06 × 10⁻³ g of glycine.
To determine the quantity of moles of hydrogen in 3.06 × 10⁻³ g of glycine, we first need to find the molar mass of glycine, which is the sum of the atomic masses of all the atoms in one molecule of glycine. The molecular formula for glycine is C₂H₅NO₂, so the molar mass of glycine is:
Molar mass of glycine = 2 × molar mass of carbon + 5 × molar mass of hydrogen + molar mass of nitrogen + 2 × molar mass of oxygen
= 2(12.01 g/mol) + 5(1.01 g/mol) + 14.01 g/mol + 2(16.00 g/mol)
= 75.07 g/mol
Next, we need to determine the number of moles of glycine in 3.06 × 10⁻³ g of glycine by dividing the mass of glycine by its molar mass:
moles of glycine = mass of glycine / molar mass of glycine
= 3.06 × 10⁻³ g / 75.07 g/mol
= 4.08 × 10⁻⁵ mol
Since the molecular formula for glycine contains five hydrogen atoms, the quantity of moles of hydrogen in 3.06 × 10⁻³ g of glycine can be found by multiplying the number of moles of glycine by the number of hydrogen atoms per molecule of glycine:
moles of hydrogen = moles of glycine × 5
= 4.08 × 10⁻⁵ mol × 5
= 2.04 × 10⁻⁴ mol
Therefore, there are 2.04 × 10⁻⁴ moles of hydrogen in 3.06 × 10⁻³ g of glycine.
To know more about molar mass, refer here:
https://brainly.com/question/30640134#
#SPJ11
for this reaction at 25 Celsius, ΔH = -1854 kJ/mole and S = -236 J/K mole
CH3COCH3 + 4O2 -> 3CO (g) + 3H2O (I)
what is the value of G for this reaction? remember that kelvin= C+273 and 1000J = 1kJ
a) -1848 kJ/mole
b) -1784 kJ/mole
c) 68,500 kJ/mole
d) -1924 kJ/mole
The value of ΔG for the reaction at 25°C is (b) -1784 kJ/mole.
To find the value of ΔG, we can use the equation:
ΔG = ΔH - TΔS
where ΔG is the change in Gibbs free energy, ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy.
Plugging in the values given:
ΔH = -1854 kJ/mol
ΔS = -236 J/(K mol) = -0.236 kJ/(K mol)
T = 25°C + 273 = 298 K
ΔG = -1854 kJ/mol - 298 K * (-0.236 kJ/(K mol))
ΔG = -1854 kJ/mol + 70.328 kJ/mol
ΔG = -1783.672 kJ/mol
Therefore, the answer is b) -1784 kJ/mole.
Learn more about Gibbs free energy here: https://brainly.com/question/13765848
#SPJ11
specific gravity is the density of a substance compared to the density of mineral oil.
Specific gravity is the ratio of the density of a substance to the density of a reference substance, usually water.
It is a dimensionless quantity and is often used in the context of fluids and solids to describe their relative densities. The specific gravity of a substance can be calculated by dividing its density by the density of the reference substance.
Specific gravity is commonly used in industries such as oil and gas, where it is used to measure the density of drilling fluids and to determine the concentration of minerals in ores. It is also used in the construction industry to measure the density of construction materials.
Learn more about Specific gravity
https://brainly.com/question/28026962
#SPJ4
Complete Question:
What is specific gravity and how is it defined?
When water is cooled from 2oC to ice at -2oC, how many distinct calculations must be made to determine the change in the heat for the system?
Answer: we need three distinct calculations
Explanation: The first one is that the heat energy released when the water is cooled to 0"c.
The second one is that the heat energy released when water changes its state to solid at constant temprature.
The third one is the heat energy released when the ice at 0'c is changed to -2'c.
What is the change in enthalpy associated with the combustion of 23.00 g of methanol in kilojoules?CH3OH(I) + 3/2O2 (g) --> CO2(g) + 2H2O(l) ΔΗ_c=-726 kJ/mol . Your answer should have four significant figures. Provide your answer below: _________kJ
The change in enthalpy associated with the combustion of 23.00 g of methanol is approximately -521.2 kJ.
To calculate the change in enthalpy associated with the combustion of 23.00 g of methanol, we need to use the stoichiometry and the given enthalpy change per mole (ΔΗ_c = -726 kJ/mol).
First, determine the number of moles of methanol (CH₃OH) by dividing the mass (23.00 g) by its molar mass (32.04 g/mol):
23.00 g / 32.04 g/mol ≈ 0.7178 mol
Now, multiply the moles of methanol by the given enthalpy change per mole:
0.7178 mol * -726 kJ/mol ≈ -521.2 kJ
So, the change in enthalpy associated with the combustion of 23.00 g of methanol is approximately -521.2 kJ (to four significant figures).
Learn more about change in enthalpy here: https://brainly.com/question/11628413
#SPJ11
A solution contains Cr3+ ion and Mg2+ ion. The addition of 1.00 L of 1.55 M NaF solution is required to cause the complete precipitation of these ions as CrF3(s) and MgF2(s). The total mass of the precipitate is 50 (g). Find the mass of Cr3+ and Mg2 in the original solution.
The mass of Cr₃⁺ ion in the original solution is 14.2 g and the mass of Mg²⁺ ion in the original solution is 10.8 g.
To calculate the mass of Cr₃⁺ and Mg²⁺ ions in the original solution, we can use the given information about the addition of NaF solution and the mass of precipitate formed.
The first step is to calculate the moles of NaF added to the solution. We can use the formula:
moles = concentration × volume
Substituting the values, we get:
moles of NaF added = 1.55 mol/L × 1.00 L = 1.55 moles
Since NaF reacts with both Cr₃⁺ and Mg²⁺ ions, we need to find the limiting reagent between the two ions to determine the maximum amount of precipitate that can form. The balanced chemical equations for the precipitation reactions are:
2 Cr³⁺(aq) + 3 F⁻(aq) → CrF₃(s)
Mg²⁺(aq) + 2 F⁻(aq) → MgF₂(s)
From these equations, we can see that the stoichiometric ratio of Cr³⁺:F⁻ is 2:3, while that of Mg²⁺:F⁻ is 1:2. Therefore, the limiting reagent will be the one that forms the least amount of precipitate.
To calculate the mass of precipitate formed, we can use the formula:
mass = moles × molar mass
The molar mass of CrF₃ is 157.99 g/mol, while that of MgF₂ is 62.30 g/mol. The mass of the precipitate is given as 50 g, so we can calculate the moles of precipitate formed for each ion:
moles of CrF₃ = 50 g / 157.99 g/mol ≈ 0.316 moles
moles of MgF₂ = 50 g / 62.30 g/mol ≈ 0.803 moles
Since Cr³⁺ forms two moles of precipitate for every three moles of NaF, the moles of Cr³⁺ can be calculated as:
moles of Cr³⁺ = (2/3) × moles of NaF added = (2/3) × 1.55 moles ≈ 1.03 moles
Similarly, the moles of Mg²⁺ can be calculated as:
moles of Mg²⁺ = 1/2 × moles of NaF added = 1/2 × 1.55 moles ≈ 0.775 moles
Now, we can use the moles of Cr³⁺ and Mg²⁺ to calculate their respective masses in the original solution:
mass of Cr³⁺ = moles of Cr³⁺ × molar mass of Cr³⁺ = 1.03 moles × 106.16 g/mol ≈ 14.2 g
mass of Mg²⁺ = moles of Mg²⁺ × molar mass of Mg²⁺ = 0.775 moles × 24.31 g/mol ≈ 10.8 g
To know more about original solution, refer here:
https://brainly.com/question/27778951#
#SPJ11
create a comic strip retelling the story of the survivors in the holocaust. Include important characters, exciting events, conflict and resolution.
Answer:
The Holocaust was a tragic event that took place during World War II. Many people were persecuted and killed because of their race, religion, or ethnicity. Despite the atrocities that took place, there were survivors who managed to escape and rebuild their lives.
One of the most important characters in the story of the Holocaust survivors is Anne Frank, who kept a diary of her experiences while in hiding from the Nazis. Other important characters include Oskar Schindler, a German businessman who saved the lives of many Jews by employing them in his factory, and Raoul Wallenberg, a Swedish diplomat who saved thousands of Hungarian Jews from deportation to concentration camps.
The story of the survivors is filled with conflict and resolution. Many faced immense danger and struggled to stay alive, while others risked their own lives to help them. The end of the war brought a resolution to the conflict, but the survivors still faced many challenges as they tried to rebuild their lives.
Overall, the story of the survivors in the Holocaust is a testament to the human spirit and the ability to persevere in the face of unimaginable hardship.
Explanation:
Which of the following atoms has the highest first ionization energy?a. Nab. Kc. Scd. Rb
Scandium (Sc) has the highest first ionization energy among the given atoms.
To determine this, we should understand that ionization energy is the energy required to remove an electron from an atom. Generally, ionization energy increases across a period (from left to right) and decreases down a group (from top to bottom) in the periodic table. The reason is that as we move across a period, the nuclear charge increases, holding the electrons more tightly, and as we move down a group, the electrons are farther away from the nucleus, making them easier to remove.
Sc has the highest ionization energy because of the poor shielding of the d-orbital, which causes the Zeff of Sc to increase. Hence, increasing the ionization energy.
To learn more about ionization energy, visit: https://brainly.com/question/28385102
#SPJ11
Scandium (Sc) has the highest first ionization energy among the given atoms.
To determine this, we should understand that ionization energy is the energy required to remove an electron from an atom. Generally, ionization energy increases across a period (from left to right) and decreases down a group (from top to bottom) in the periodic table. The reason is that as we move across a period, the nuclear charge increases, holding the electrons more tightly, and as we move down a group, the electrons are farther away from the nucleus, making them easier to remove.
Sc has the highest ionization energy because of the poor shielding of the d-orbital, which causes the Zeff of Sc to increase. Hence, increasing the ionization energy.
To learn more about ionization energy, visit: https://brainly.com/question/28385102
#SPJ11
determine the kb of an acid with a ka of 7.8x10-3. kw at 25 oc is 1x10-14
The Kb of the acid is approximately 1.28 x 10^-12.
When determining the Kb of an acid with a given Ka value of 7.8 x 10^-3, the ion product of water (Kw) can be utilized.
At a temperature of 25°C, Kw is known to be 1 x 10^-14. The relationship between Ka, Kb, and Kw is given by the equation:
Kw = Ka * Kb.
By rearranging this equation, we can find the value of Kb, which is the desired quantity.
Substituting the given values into the rearranged equation, we obtain
Kb = (1 x 10^-14) / (7.8 x 10^-3),
which simplifies to
Kb ≈ 1.28 x 10^-12
This result indicates that the Kb of the acid is approximately 1.28 x 10^-12.
This calculation is useful in determining the basicity of the acid and its reactivity in basic solutions. Additionally, the relationship between Ka, Kb, and Kw is an important concept in acid-base chemistry, and it is essential for understanding the behavior of acids and bases in various chemical reactions. Overall, this calculation is a simple yet essential example of how to determine the Kb of an acid using known values of Ka and Kw.
Know more about relationship between Ka, Kb, and Kw here:
https://brainly.com/question/15400042
#SPJ11
in an experiment, 0.25 mol of nh3 is formed when 0.5 mol of n2 is reacted with 0.5 mol of h2. what is the percent yield
The percent yield for this experiment is approximately 75%. The percent yield is the actual yield of a reaction divided by the theoretical yield, multiplied by 100. In this case, we need to first find the theoretical yield of NH3 that should have been produced based on the amount of N2 and H2 that were reacted.
The balanced chemical equation for the reaction is:
N2 + 3H2 → 2NH3
From the given information, you have reacted 0.5 mol N₂ with 0.5 mol H₂. To find the limiting reactant, compare the mole ratios:
For N₂: 0.5 mol N₂ × (2 mol NH₃ / 1 mol N₂) = 1 mol NH₃ (theoretical yield)
For H₂: 0.5 mol H₂ × (2 mol NH₃ / 3 mol H₂) ≈ 0.333 mol NH₃ (theoretical yield)
Since the theoretical yield for H₂ is smaller, H₂ is the limiting reactant. The maximum amount of NH₃ that can be formed is 0.333 mol. The actual yield is given as 0.25 mol NH₃. Now, calculate the percent yield:
Percent Yield = (Actual Yield / Theoretical Yield) × 100
Percent Yield = (0.25 mol / 0.333 mol) × 100 ≈ 75%
To know more about reaction visit :-
https://brainly.com/question/28984750
#SPJ11
calculate the solubility of au(oh)3 in (a) water and (b) 1.0 m nitric acid solution (ksp = 5.5 * 10 - 46).
The solubility of [tex]Au(OH)_{3}[/tex] in water and 1.0 M nitric acid can be calculated using the solubility product constant (Ksp) expression: the solubility of [tex]Au(OH)_{3}[/tex] in 1.0 M nitric acid solution is 5.5 x [tex]10^{-18}[/tex] M.
Ksp = [tex][Au_{3} ^{+} ][OH^{-} ]^3[/tex]
where [[tex][Au_{3} ^{+} ][/tex]] is the concentration of the [tex][Au_{3} ^{+} ][/tex] ions and [tex][OH^{-} ]^3[/tex] is the concentration of hydroxide ions.
(a) Solubility of [tex]Au(OH)_{3}[/tex] in water:
Ksp = [tex][Au_{3} ^{+} ][OH^{-} ]^3[/tex]
Ksp = x * [tex](x)^3[/tex] = [tex]x^4[/tex]
x = [tex](Ksp)^(1/4)[/tex] = [tex](5.510^{-46} )^(1/4)[/tex] = [tex]1.110^{-12}[/tex] M
Solubility of [tex]Au(OH)_{3}[/tex] in water is [tex]1.110^{-12}[/tex] M.
(b) Solubility of [tex]Au(OH)_{3}[/tex] in 1.0 M nitric acid solution:
[[tex][Au_{3} ^{+} ][/tex]] = [tex](Ksp / [OH^{-} ]^3)^1/4[/tex]
[[tex]OH^{-}[/tex]] = 1.0 x [tex]10^{-14}[/tex] M (from Kw expression)
[[tex][Au_{3} ^{+} ][/tex]] = (5.5 x [tex]10^{-46}[/tex] / [tex](1.0 x 10^{-14} M)^3)^1/4[/tex]
[[tex][Au_{3} ^{+} ][/tex]] = [tex]5.5 x 10^{-18} M[/tex]
Therefore, the solubility of [tex]Au(OH)_{3}[/tex] in 1.0 M nitric acid solution is 5.5 x [tex]10^{-18}[/tex] M.
Learn more about nitric acid
https://brainly.com/question/29769012
#SPJ4
heelp pls
Which element has the lowest electronegativity?
nitrogen (N)
lithium (Li)
bromine (Br)
potassium (K)
Answer: Potassium (K) has the lowest electronegativity among the given elements.
Explanation:
Electronegativity is a measure of an element's ability to attract electrons towards itself when it is involved in a chemical bond with another element. Potassium has the lowest electronegativity because it has only one valence electron that is located far from the nucleus, making it easier to lose that electron and become a positively charged ion. In contrast, nitrogen, lithium, and bromine have higher electronegativities because they have more valence electrons or the valence electrons are closer to the nucleus, making it more difficult to remove or share electrons.
The element with the lowest electronegativity among the given options is potassium (K). Potassium has an electronegativity value of approximately 0.82 on the Pauling scale, which is the lowest value among the four elements listed. In contrast, nitrogen (N) has an electronegativity of approximately 3.04, bromine (Br) has an electronegativity of approximately 2.96, and lithium (Li) has an electronegativity of approximately 0.98. Electronegativity is a measure of an atom's ability to attract electrons towards itself in a chemical bond. The lower the electronegativity value, the less the atom attracts electrons towards itself.
Brainliest?
When hydrogen chloride gas is added to water, the products are hydronium ions and chloride ions. Explain why, according to the Brønsted-Lowry and Lewis models, water can be described as a base in the reaction.
When hydrogen chloride gas is added to water, the products are hydronium ions and chloride ions and as the hydrogen ion is an acceptor, water is described as a Bronsted-Lowry base.
Generally according to concept of Bronsted-Lowry theory," acid is defined as a substance which donates an H⁺ ion or a proton and forms its conjugate base and the base is defined as a substance which accepts an H⁺ ion or a proton and forms its conjugate acid".
And now we can see that a hydrogen ion usually gets transferred from the HCl molecule to the H₂O molecule to give chloride ions and hydronium ions. And it is also clear that the hydrogen ion donor, HCl acts as a Bronsted-Lowry acid and also as a hydrogen ion acceptor, H₂O is a Bronsted-Lowry base.
Learn more about Bronsted Lowry acids and bases from the link given below.
https://brainly.com/question/14407412
#SPJ1
Which of the following types of shoes are recommended by the American Chemical Society for general laboratory work? a. cloth-topped "tennis" or "running" shoes b. sandals c. woven leather shoes d. high heels
According to the American Chemistry Society, cloth-topped "tennis" or "running" shoes are recommended for general laboratory work. Sandals, woven leather shoes, and high heels are not recommended as they do not provide adequate protection for the feet against spills or dropped objects in a laboratory setting.
The American Chemical Society is a scientific society based in the United States that supports scientific research in the field of chemistry.
Other safety precautions include: Wearing appropriate gloves, masks, lab coat and shoes. Being careful while using pipette. Washing the glassware properly before using etc.
For more questions regarding American Chemical Society: https://brainly.com/question/28492543
#SPJ11
Classify each of the following amines. In the case of a compound with more than one nitrogen atom, consider only the one that is indicated with the red letter 'a'. diethylamine purine
______ _______ _________
Answer Bank: -heterocyclic -heterocyclic aromatic -primary aliphatic -secondary aliphatic -tertiary aliphatic
-primary aromatic -secondary aromatic -tertiary aromatic
Diethylamine is a primary aliphatic amine, purine is not categorized as any of the amine classifications.
Diethylamin: This is a compound with two ethyl groups attached to a primary amine (-NH2) functional group.
purine: Purine is a heterocyclic aromatic compound that contains two nitrogen atoms in its ring structure. However, it is not classified as an amine because it does not have an -NH2 or -NR2 functional group.
Diethylamine (C4H11N) is a colorless liquid with a fishy odor. It is a common organic compound and is used as a precursor to a variety of chemicals, including pharmaceuticals, insecticides, and rubber chemicals. Diethylamine is a strong base and forms salts with acids. It is also flammable and can react violently with oxidizing agents.
Purine is a heterocyclic aromatic compound with the chemical formula C5H4N4. It is a building block of DNA and RNA, and is found in many foods, including meat, fish, and beans.
Purine is also used in the synthesis of pharmaceuticals, including drugs used to treat gout and leukemia. Its structure consists of a fused pyrimidine and imidazole ring, and its aromaticity arises from the delocalization of π-electrons over the two rings.
learn more about Organic compounds here:
https://brainly.com/question/5994723
#SPJ11
Identify the expected product(s) of the following solvolysis process. Select all that apply. Br MeOH heat ? 0 OCH3 OH O OCH3 O O OH
The expected products of the solvolysis process are methanol (MeOH) and bromide ion (Br-) being the leaving group. Therefore, the products should be methoxide ion (OCH3) and a molecule of HBr. The reaction can be represented as follows:
Br- + MeOH (heat) → OCH3- + HBr
So, the expected product(s) are OCH3- and HBr.
The expected product(s) for this reaction include:
1. OCH3-substituted compound: The bromine atom is replaced by a methoxy group (OCH3) due to nucleophilic substitution by methanol.
2. OH-substituted compound: The bromine atom is replaced by a hydroxyl group (OH) if a small amount of water is present, which is also a common nucleophile.
Solvolysis refers to a type of chemical reaction where a molecule is cleaved or transformed in the presence of a solvent. The solvent can be water or any other polar or nonpolar substance that has the ability to dissolve the reactant. In a solvolysis reaction, the solvent acts as a nucleophile and can replace or modify certain chemical groups in the molecule, resulting in a new product. Solvolysis is a common reaction in organic chemistry and is often used to synthesize new compounds or to break down complex molecules into simpler ones. Examples of solvolysis reactions include hydrolysis, alcoholysis, and ammonolysis.
Visit here to learn more about solvolysis brainly.com/question/29448847
#SPJ11
Digoxin is a drug that has been used to treat systolic heart failure for over 200 years. it has a therapeutic index value of 2.digoxin is a drug that has been used to treat systolic heart failure for over 200 years. it has a therapeutic index value of 2. Why is digoxin used in systolic heart failure?
Digoxin is used in systolic heart failure because it helps to increase the strength and efficiency of the heart's contractions, particularly in cases where the systolic function of the heart is impaired.
Digoxin works by inhibiting the sodium-potassium ATPase pump, which leads to an increase in intracellular calcium concentrations and subsequently improves the contractility of the heart. This makes it an effective treatment option for patients with systolic heart failure, as it can help to improve cardiac output and reduce symptoms such as shortness of breath and fatigue.
However, due to its narrow therapeutic index, careful monitoring is necessary to ensure that digoxin levels remain within a safe and effective range.
Learn more about Digoxin here:
https://brainly.com/question/12978309
#SPJ11
Penersive odience J
Which answer below correctly identifies the type of change and the explanation for the boiling of water?
physical change because even though the change caused the temperature of the water to increase
the water's physical properties remained exactly the same
physical change because even though gas formation was observed, the water was undergoing a
state change, which means that its original properties are preserved
chemical change because gas formation was observed, which indicated that the water was
transformed into a different substance
chemiçal change because a temperature change was observed, which indicated that the water was
transformed into a different substance
DONE
o) Intro
The correct answer is "physical change because even though gas formation was observed, the water was undergoing a state change, which means that its original properties are preserved".
Why is boiling of water a physical change?When water boils, it undergoes a physical change from a liquid state to a gas state, but the water molecules remain the same and its chemical properties do not change. The boiling of water is a result of an increase in temperature and does not involve a chemical reaction.
Learn about physical change here https://brainly.com/question/14444325
#SPJ1
how many peaks would you expect in the c13 nmr of phenylethylamine?
In the [tex]C_{13}[/tex] NMR of phenylethylamine, we would expect to see four peaks.
This is because phenylethylamine contains four unique carbon environments: the carbon attached to the amino group, the carbon alpha to the amino group, the two carbons in the phenyl ring, and the carbon beta to the phenyl ring.
Each of these carbon environments will give rise to a distinct peak in the C13 NMR spectrum.
To know more about phenylethylamine, refer here:
https://brainly.com/question/29517032#
#SPJ11
In the [tex]C_{13}[/tex] NMR of phenylethylamine, we would expect to see four peaks.
This is because phenylethylamine contains four unique carbon environments: the carbon attached to the amino group, the carbon alpha to the amino group, the two carbons in the phenyl ring, and the carbon beta to the phenyl ring.
Each of these carbon environments will give rise to a distinct peak in the C13 NMR spectrum.
To know more about phenylethylamine, refer here:
https://brainly.com/question/29517032#
#SPJ11
What is the name of the particle having the following atomic notation He? A neutron B) beta c) none of the above D gamma E alpha
Answer:
I may be incorrect but C? Isnt it positron
Explanation:
Calculate the volume occupied by 32. 0 g of O2 gas, the pressure of the O2 gas is 78. 5 kPa at 25°C
Answer:
31.5 L
Explanation:
Simply use PV=nRT
Convert kPa to atm by using 101.3 kPa = 1 atm
78.5 kPa x (1 atm/101.3 kPa) = .775 atm
Then find moles of O2 where MM = 32 so we have 1.0 moles
Find T in Kelvin = C +273 = 25 + 273 = 298
(.775 atm)(V) = 1.0 moles(0.082 atm x L / mol x K)(298 K)
V = 31.5 L
Which of the following represents the overall transformation when a carboxylic acid is converted to an ester? a. The combining of the fragments which remain after the loss of -OH from the carboxylic acid and - from the alcohol. b. The combining of the fragments which remain after the loss of -OH from the alcohol and H from the carboxylic acid.
c. The combining of the fragments which remain after the loss of an oxygen from a carboxyl group and two hydrogens from ammonia or an amine.
d. The combining of the fragments which remain after the loss of oH from the carboxylic acid and from ammonia or an amine.
The combining of the fragments which remain after the loss of -OH from the alcohol and H from the carboxylic acid represents the overall transformation when a carboxylic acid is converted to an ester. This process is called esterification. Therefor the option B is correct.
The combination of the parts left over after the loss of -OH from the alcohol and H from the carboxylic acid represents the complete transformation when a carboxylic acid is transformed into an ester.
Esterification is a typical reaction in organic chemistry that describes this process. A carboxylic acid and an alcohol react with the help of an acid catalyst to produce an ester and water during esterification.
The creation of a new C-O bond between the oxygen of the alcohol and the carbonyl carbon of the carboxylic acid drives the reaction. The -OH group of the carboxylic acid and the -H group of the alcohol are removed and the remaining pieces are joined to create the ester.
The production of many different chemicals, including plasticizers, perfumes and flavors, depends on this interaction. In general, esterification is a fundamental organic chemical reaction with several industrial and commercial uses.
To know more about esterification,
https://brainly.com/question/28118164
The reaction A→B has been experimentally determined to be second order. The initial rate is 0.0100M/s at an initial concentration of A of 0.150 M .
1. What is the initial rate at [A]=0.850 M ?
a. 0.321 M/s
b. 0.113 M/s
c. 5.67×10−2 M/s
The initial rate at [A] = 0.850 M is approximately 0.321 M/s. The correct answer is (a) 0.321 M/s.
Here, the initial rate of the reaction is 0.0100 M/s when the initial concentration of A is 0.150 M, we need to determine the initial rate at an initial concentration of 0.850 M.
For a second-order reaction, the rate law can be written as: rate = k[A]^2
where k is the rate constant and [A] is the concentration of A.
First, we need to find the value of k using the given initial rate and initial concentration: 0.0100 M/s = k(0.150 M)^2
Now, we can solve for k: k = (0.0100 M/s) / (0.150 M)^2
k ≈ 0.4444 M⁻¹s⁻¹
Next, we can use the value of k and the new initial concentration [A] = 0.850 M to find the new initial rate:
rate = k[A]^2rate = (0.4444 M⁻¹s⁻¹)(0.850 M)^2
Calculating the rate, we get:
rate ≈ 0.321 M/s
So, the initial rate at [A] = 0.850 M is approximately 0.321 M/s. The correct answer is (a) 0.321 M/s.
Learn more about second order reaction here, https://brainly.com/question/17586293
#SPJ11
If 56.0g of N2 gas occupies 44.8L under standard conditions, then what is the mass of 134.4L of H2 gas under the same conditions?
What mass of NH3 will be formed by the reaction between the two gases above? Write the complete balanced reaction first.
Answer:
12.09528g [tex]H_{2}[/tex]
68.12208g [tex]NH_{3}[/tex]
Explanation:
[tex]n = \frac{V}{V_{m} } \\ = \frac{134.4}{22.4} \\ = 6 mol H_{2}[/tex]
[tex]n=\frac{m}{M} \\m= nM\\=(6)(2.051588)\\=12.09528g H_{2}[/tex]
[tex]N_{2} : NH_{3} \\ 1 : 2\\2:x\\x= 4mol NH_{3} \\\\n = \frac{m}{M} \\m=nM\\=(4)(17.03052)\\=68.12208g NH_{3}[/tex]
which type of molecule contains -nh2 (amino) groups? A. Carbohydrate B. Protein C. Lipid D. Nucleic acid.E. None of the above.
The correct answer to the question of which type of molecule contains -[tex]NH_{2}[/tex](amino) groups is B. Protein.
Proteins are made up of long chains of amino acids, which are the building blocks of protein molecules. Amino acids are characterized by their -[tex]NH_{2}[/tex] (amino) group, which is what makes them unique from other types of molecules like carbohydrates, lipids, and nucleic acids. Carbohydrates, on the other hand, are made up of simple sugars like glucose, fructose, and galactose. They do not contain amino groups in their molecular structure. Lipids are fats, oils, and waxes that are made up of fatty acids and glycerol. They also do not contain amino groups in their molecular structure. Nucleic acids like DNA and RNA are composed of nucleotides, which do not contain amino groups. Therefore, it can be concluded that proteins are the only type of molecule that contains -[tex]NH_{2}[/tex] (amino) groups. These groups play an important role in the structure and function of proteins, as they help to form the peptide bonds that link amino acids together in a protein chain.
Learn more about protein here: https://brainly.com/question/13129
#SPJ11
It is observed that 7.53 mmol of BaF, will dissolve in 1.0 L of water. Use these data to calculate the value of Kap for barium fluoride. 0.00011 O 4.3x10^-7 O 1.7x10^-6 2.3x10^-4 5.7x10^-5
The solubility product constant (Ksp) for a sparingly soluble salt like barium fluoride ([tex]BaF_{2}[/tex]) can be calculated using the molar solubility of the salt. In this case, the molar solubility of [tex]BaF_{2}[/tex] is 7.53 mmol/L. the value of Ksp for barium fluoride is 4.3x[tex]10^{-7} .[/tex]
The balanced equation for the dissolution of [tex]BaF_{2}[/tex] is:
[tex]BaF_{2}[/tex] (s) ⇌ [tex]Ba_{2}[/tex]+(aq) + [tex]2F^{-}[/tex](aq)
The Ksp expression is:
Ksp = [tex][Ba_{2}^{+} ][F^{-} ]^2[/tex]
Substituting the molar solubility of [tex]BaF_{2}[/tex] in the expression, we get:
Ksp = [tex](7.53[/tex]x[tex]10^_{-3} )^3[/tex] = 4.3x[tex]10^{-7}[/tex]
Therefore, the value of Ksp for barium fluoride is 4.3x[tex]10^{-7} .[/tex]
Learn more about molar solubility
https://brainly.com/question/14784441
#SPJ4
the half-life of protactinium-234 is 6.69 hours. if a 0.812 mg sample of pa-239 decays for 40.1 hours, what mass of the isotope remains?
The mass of the Pa-234 isotope that remains after 40.1 hours is 0.003 mg.
To solve this problem, we need to use the formula for radioactive decay:
N = N0(1/2)^(t/T)
Where N is the remaining amount of the isotope, N0 is the initial amount, t is the time that has elapsed, T is the half-life of the isotope.
First, we need to find the initial amount of Pa-234. Since the sample is of Pa-239, we need to assume that it decays into Pa-234. The atomic mass of Pa-239 is 239, and it decays into U-235 with a half-life of 23.5 minutes. U-235 decays into Pa-231, which then decays into Pa-234. The decay chain looks like this:
Pa-239 --> U-235 --> Pa-231 --> Pa-234
So, the initial amount of Pa-234 can be calculated from the initial amount of Pa-239 using the decay chain:
N0(Pa-234) = N0(Pa-239) x (1/2)^(40.1/6.69)
N0(Pa-239) = 0.812 mg
N0(Pa-234) = N0(Pa-239) x (1/2)^(40.1/6.69) = 0.812 mg x 0.0243 = 0.0197 mg
Now, we can use the formula for radioactive decay to find the remaining amount of Pa-234 after 40.1 hours:
N(Pa-234) = N0(Pa-234) x (1/2)^(40.1/6.69)
N(Pa-234) = 0.0197 mg x (1/2)^(40.1/6.69) = 0.003 mg
Therefore, the mass of the Pa-234 isotope that remains after 40.1 hours is 0.003 mg.
Know more about Half-life of a reaction here:
https://brainly.com/question/13052575
#SPJ11
the solubility of ag2s is measured and found to be 7.37×10-15 g/l. use this information to calculate a ksp value for silver sulfide.
To calculate the Ksp value for silver sulfide (Ag2S) using its solubility, follow these steps:
1. Convert solubility to molar solubility:
Solubility = 7.37 × 10^-15 g/L
Molar mass of Ag2S = (2 × 107.87 g/mol Ag) + 32.07 g/mol S = 247.81 g/mol
Molar solubility = (7.37 × 10^-15 g/L) / (247.81 g/mol) = 2.97 × 10^-17 mol/L
2. Write the dissolution equilibrium reaction:
Ag2S (s) ⇌ 2Ag+ (aq) + S2- (aq)
3. Set up the Ksp expression:
Ksp = [Ag+]^2 × [S2-]
4. Find the molar concentrations of Ag+ and S2-:
Since 1 mol of Ag2S produces 2 mol of Ag+, the concentration of Ag+ is 2 × 2.97 × 10^-17 mol/L = 5.94 × 10^-17 mol/L.
The concentration of S2- is equal to the molar solubility, 2.97 × 10^-17 mol/L.
5. Plug the concentrations into the Ksp expression and solve:
Ksp = (5.94 × 10^-17)^2 × (2.97 × 10^-17) = 1.05 × 10^-50
So, the Ksp value for silver sulfide (Ag2S) is approximately 1.05 × 10^-50.
Learn more about Ksp expression here:
https://brainly.com/question/27132799
#SPJ11
Hypothesize the role of the modification seen on Fucose. Focus on chemistry not complex biological function.
The role of the modification seen on Fucose could be to fine-tune its chemical properties and interactions with other molecules, particularly proteins, through the addition or removal of functional groups. This would, in turn, influence the function of the glycoproteins and glycolipids containing the modified Fucose.
Fucose is a monosaccharide, specifically a deoxyhexose sugar, which is often found as a component of glycoproteins and glycolipids in eukaryotes. It can be modified through the addition or removal of functional groups, such as sulfation or acetylation, which can alter its properties and interactions with other molecules.
A possible role of the modification seen on Fucose could be to modulate its interactions with proteins, such as lectins or enzymes, that recognize and bind to Fucose-containing structures. By altering the chemical properties of Fucose, the modification may enhance or weaken the binding affinity between Fucose and its binding partners.
For instance, the addition of a sulfate group to Fucose (creating sulfated Fucose) could increase its overall negative charge, potentially improving its interaction with positively charged protein domains. Conversely, acetylation of Fucose, which adds an acetyl group, might reduce the overall negative charge, leading to weaker binding or altered selectivity.
Know more about Fucose - brainly.com/question/5306921
#SPJ11