Which ituation with or without friction i more imilar to your everyday experience on a kateboard or bicycle?

Answers

Answer 1

Skateboarders move more quickly and more slowly depending on the gravitational field around them.

Skateboarders go more slowly and more quickly depending on the amount of friction they encounter. The skater initially has no kinetic energy, only potential energy. The skater had used all of the energy that she will ever have. Since the track is frictionless, no energy is converted to thermal energy throughout the route from point A to point B. The skater has greater potential energy the higher he is. His kinetic energy increases and his potential energy falls as his height decreases. Ice skating is a good illustration of sliding friction.

Learn more about energy here-

https://brainly.com/question/1932868

#SPJ4


Related Questions

rosa suggests a source of error: some of the energy from the heating coil is lost because the insulation of the container is not perfect. what type of error will this cause? that is, will the experimental values for specific heat be higher or lower than the actual values? explain your reasoning.

Answers

The experimental values for specific heat will be higher than the actual values.

What is specific heat?

The specific heat capacity, or massic heat capacity, of a substance, is calculated using thermodynamics as the heat capacity of a sample of the substance divided by the mass of the sample.

1) The error would be a systematic error i.e., error due to instruments.

And the specific value would be lower than the actual since some heat is lost in the process.

2) By adding the mass of the container, the experiment would have a blunder error i.e., the mistake error or the human error.

The experimental value would then come as lower, since the extra mass in the calculation will give rise to more mass and which would require more heat. But since, the heat is the same, so the calculated value would come lower.

3) by adding salt in it, the specific heat would come lower.


To learn more about the specific heat the link s given below:
https://brainly.com/question/13724279?
#SPJ4

A 2.0 kg piece of metal flying at -1.0 m/s hits a windshield of a 200.0 kg object at 15.00 m/s. They collide and stick together. What is the total momentum before the collision?

Answers

The total momentum before the collision is -2.0kgm/s.

What is momentum?

This can be defined as the product of the mass and velocity of an object.

what is the formula for calculation momentum?

momentum Ρ= mass*velocity

                      =m*v

Given in the equation:

m₁=2.0kg

v₁=-1.0m/s

Calculating the first momentum i.e momentum before collision:

Ρ₁=m₁*v₁

   =2.0kg*-1.0m/s

   Ρ₁ =-2.0kgm/s

Given in the equation:

m₂=200.0kg

v₂=15.00m/s

Calculating the second momentum:

Ρ₂=m₂*v₂

    =200.0kg*15.00m/s

    =3,000kgm/S.

Hence the total momentum before the collision will be the first momentum i.e Ρ₁ =-2.0kgm/s

Learn more about momentum on

https://brainly.com/question/2361317

#SPJ1

Answer:

-2.0kgm/s

Explanation:

The other guy said so

A cheetah has a mass of 60 kg. It produces a force of 480 n between its feet and the ground. What is its acceleration?.

Answers

A cheetah with a mass of 60 kg and a force of 480 N accelerates at a rate of 8 m/s2.

The acceleration of an object is equal to the net force exerted on it divided by its mass, or a = F m, in accordance with Newton's second rule of motion. The force applied divided by the mass of the item yields the acceleration of a moving body. the following:

Mass Force (N) Acceleration (m/s2) (kg)

In response to your inquiry, a cheetah weighs 60 kg and exerts 480 N of force.

Acceleration = 480 x 60

Acceleration equals 8m/s2.

Therefore, the cheetah's acceleration for a mass of 60 kg and a force of 480 N equals 8 m/s2.

Learn more about acceleration here-

https://brainly.com/question/12550364

#SPJ4

The right answer is "8 m/s²"

Answer explanation:

Acceleration = force / mass

= 480 N / 60 kg

= 8 m/s2

Hope it helps✨✨

Ali and kris are driving to a city that is 120 miles from their house. They have already traveled 20 miles, and they are driving at a constant rate of 50 mi/h. Write a function that models their distance from home as a function of time. What is a reasonable domain for this situation?.

Answers

The remaining distance that would result from multiplying the speed by the time t will be added to the 20 miles that make up the total distance. The domain's response would be 0 t 2.

By distance, what do you mean?

The distance or amount of between two objects, points, etc. The condition or fact of being far from another in space; distance. a straight line in space It would take too long to walk seven miles in one hour. A wide body of water encircled the ship.

What are length and distance?

A segment's or a room's dimensions are examples of things that can be measured in terms of length. Distance is the separation between two things, like two cities and two points.

To know more about Distances visit:

https://brainly.com/question/15172156

#SPJ4

The ladder shown is 3.0 m long and the coefficient of static friction between the floor and ladder is 0.50. There is no friction between the wall and the ladder. What is the minimum angle (in degrees) that the ladder can make with the floor without slipping?

This is a static equilibrium problem. The sum of the torques equals zero, the sum of the forces along x equals zero, and the sum of the forces along y equals zero. Use the point where the ladder contacts the ground as the axis of rotation. At the minimum angle, you're getting the maximum possible value of static

Answers

45° s the minimum angle (in degrees) that the ladder can make with the floor without slipping defying friction.

F=μmg

" Moment along the bottom of ladder "

[tex]0.5 Lmg cos \theta=LF_wsin \theta[/tex]

[tex]0.5 Lmg cos \theta=L \mu mg sin \theta[/tex]

[tex]0.5 cos \theta=mu sin \theta[/tex]

[tex]\theta=tan^-1(0.5 )/(\mu)[/tex]

Θ= 45°

Physical friction is all around us. Static friction is the resistance to an object moving along a route. Finally, explain it with a simple example. Consider the common activity we all engage in: walking. While working, we are continuously in contact with the floor. As we advance our feet, motion pushes on the earth as we travel backward.

The fact that friction operates in the opposite direction from relative motion is one important aspect to be aware of in order to decrease friction. This phenomenon might be helpful for slowing down the action until it eventually stops.

To know more about  Friction visit : brainly.com/question/28356847

#SPJ4

If a car collides with a moving bus, what type of relationship exists between the force of the car and the force of the bus?.

Answers

The correct answer is forces are equal but opposite in direction between car and bus.

What do we mean by Collision?

When two objects collide, forces of equal magnitude and opposite direction are applied to each object. Such pressures frequently result in one thing gaining momentum and gaining speed while the other object slows down (lose momentum).

The force applied to an object to cause an impact—a change in momentum—on it is referred to as the impact force, or momentum. Technically speaking, the Car and the bus would have exerted and felt the same amount of impact force in the event of a collision. Because every action has a corresponding and opposing response, according to Newton's third law.

To learn more about Collision from the given link

https://brainly.com/question/24915434

#SPJ4

a 45.0-kg woman stands up in a 60.0-kg canoe 5.0 m long. she walks from a point 1.00 m from one end to a point 1.00 m from the other end. if you ignore resistance to motion of the canoe in the water, how far does the canoe move during this process?

Answers

Answer:

Measure the CM from the left end of the canoe

M x = (45 * 1 + 2.5 * 60)      M = 105

x = (45 + 150) / 105 = 1.86 m         from left end

After she walks 3 m the CM is from the left end

M y = (45 * 4 + 60 * 2.5)

y = (45 * 4 + 60 * 2.5) / 105 = 3.14 m

The left end of the canoe has moved 1.28 m to left

(The CM cannot move without an external force)

Check:

She increases the CM by 45 (3 - 1.28) = 77.4

Canoe movement decreases the CM by 60 * 1.28 = 76.8

1.28 is close

A solar eclipse happens when…
A. the Moon’s shadow crosses Earth’s surface.
B. the Earth’s shadow crosses the Sun’s surface.
C. the Earth’s shadow crosses the Moon’s surface.
D. the Sun’s shadow crosses the Moon’s surface.

Answers

Answer:

A. the Moon's shadow crosses Earth's surface.

Explanation:

When the Moon orbits Earth, the Moon moves between the Sun and Earth. When this happens, the Moon blocks the light of the Sun from reaching Earth. This causes an eclipse of the Sun or a solar eclipse. During a solar eclipse, the Moon casts a shadow onto Earth.

Answer:

a) Moon’s shadow crosses Earth’s surface.

Explanation:

A solar eclipse happens when the Moon’s shadow crosses Earth’s surface. Hence, the option (a) is correct answer.

gravity on the moon is 1.6 m/s2. what is the gravitational potential energy of a 1200-kg lander resting on top of a 350-m hill? j

Answers

The energy that an object has due to its location in a gravitational field is known as gravitational potential energy. GPE = mgh is the formula for gravitational potential energy. GPE = 1200(1.6)(350) = 672000 J

What is the source of gravitational potential energy?

If an object is located at a height that is higher (or lower) than the zero height, it has gravitational potential energy. If an object is situated on an elastic media in a position other than the equilibrium position, it has elastic potential energy.

How is the energy of gravitational potential stored?

By utilizing a pump, crane, or engine to raise a mass to a specific height, gravity batteries can store gravitational potential energy. Depending on the mass of the object and also how high it was lifted, the mass now retains a specific gravitational potential energy after being raised.

To know more about gravitational potential energy  visit:

https://brainly.com/question/19768887

#SPJ4

an 8.0-g bullet is shot into a 4.0-kg block, at rest on a frictionless horizontal surface (see the figure). the bullet remains lodged in the block. the block moves into an ideal massless spring and compresses it by 8.7 cm. the spring constant of the spring is 2400 n/m. the initial velocity of the bullet is closest to

Answers

The velocity of the bullet is  1100 m/s.

When the bullet lodges into the block, as there is no net external force, the momentum of the system will be conserved. After that when the block + bullet system compresses the spring, the energy of the system remains conserved. The kinetic energy is conserved into the potential energy of the spring.

Velocity is the directional speed of an object in movement as an illustration of its price of the trade-in position as found from a particular frame of reference and as measured through a specific standard of time.

Calculation:-

Mass of block, M = 4 Kg

Mass of bullet, m = 8 g = 0.008 Kg

Compression in spring, x = 8.7cm = 0.087 m

Let's first solve the energy conservation,

K.E. = P.E.

(1/2)(M+m)V2 = (1/2)kx2

V2 = 2400*(0.087)2/(4+0.008)

V2 = 4.53

V = 2.13 m/s

Now, conserving the momentum,

mv = (M+m)*V

v = (4+0.008)*2.13/0.008

The velocity of the bullet, v = 1066.6 m/s

Rounding to the velocity as 1100 m/s

Learn more about velocity here:-https://brainly.com/question/24445340

#SPJ4

what is the angular acceleration of the pencil when it makes an angle of 10.0 degrees with the vertical? express your answer numerically in radians per second squared to three significant figures. view available hint(s)

Answers

The angular acceleration of the pencil when it makes an angle of 10.0 degrees with the vertical is 2.553 rad/s² of every meter length of the pencil.

If the pencil is in the position 10.0 degrees with the vertical, the weight of the pencil in the middle of the pencil will go down. Look at the triangle, x is the distance to calculate the torque.

[tex]\frac{x}{\frac{1}{2} L} = sin \: 10^o[/tex]
[tex]x = \frac{1}{2} L \: sin \: 10^o[/tex]Moment of inertia for a cylindrical rod-shaped object with a shaft at the end [tex]\frac{1}{3} mL^2[/tex].

Newton's second law of rotation
∑τ = Iα

wx = Iα

[tex]w \frac{1}{2} L \: sin \: 10^o = \frac{1}{3} m L^2 \alpha[/tex]

[tex]mg \frac{1}{2} \: sin \: 10^o = \frac{1}{3} mL \alpha[/tex]

[tex]g \frac{1}{2} \: sin \: 10^o = \frac{1}{3} L \alpha[/tex]

[tex]\alpha = \frac{g \frac{1}{2} \: sin \: 10^o}{\frac{1}{3} L}[/tex]

[tex]\alpha = \frac{3 g \: sin \: 10^o}{2L}[/tex]

[tex]\alpha = \frac{3 \times 9.8 \times 0.1736}{2L}[/tex]

[tex]\alpha = \frac{2.553}{L}[/tex]

Because the length of pencil unknown

α = 2.553 rad/s² of every meter length of the pencil.

Learn more about Torque here: https://brainly.com/question/20372081

#SPJ4

How high would a skater need to start on a previous incline to make it up and around a loop that is 6.1meters high?

Answers

The skater need to start 7.525 meter high.

Let,

The skater need to start on a previous incline at height = h.

Mass of the skater = m

Given, height of the loop = 6.1 meter.

Radius of the loop; r = 6.1/2 meter = 3.05 meter.

Let to make it up and around a loop that is 6.1meters high, the man required minimum velocity v on the highest point of the loop.

So, centripetal force at highest point = weight of the man

⇒ mv²/r = mg

⇒ v = √(gr)

Then, potential energy of the skater at height h is = mgh.

And, minimum energy  of the skater at the highest point of the loop is = potential energy + minimum kinetic energy.

= mg(2r) + 1/2 mv²

= 2mgr + 1/2 mgr

= 5/2 mgr

According to conservation of energy,

potential energy of the skater at height h = minimum energy  of the skater at the highest point of the loop

⇒ mgh = 5/2 mgr

⇒ h = 5/2 r =( 5/2 )× 3.05 meter = 7.525 meter.

Hence, required height is 7.525 meter.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ1

A certain microwave ha a wavelength of. 032m. Calculate the frequency of the microwave

Answers

The frequency of microwave is 9.4 ×10⁹ Hz when it has wavelength of 0.032m.

What is wavelength?

The distance between two identical points (adjacent crests) in adjacent cycles of a waveform signal as it moves through space or along a wire is known as its wavelength. In wireless systems, this length is commonly specified in meters (m), centimeters (cm), or millimetres (mm).

The relationship between wavelength and frequency is inverse, as shown by the equation.

c=λ⋅v

where,

λ - the wavelength of the wave

v - the frequency of the wave

c - the speed of light in a vacuum, approximately equal to 3⋅10⁸ms⁻¹

This demonstrates that low frequency waves have long wavelengths while high frequency waves have small wavelengths.

Since the wave's wavelength is relatively long, a high frequency is to be anticipated. Fill in your values in the aforementioned equation to find v.

c = λv

∴ v = c/λ

v = 3.10⁸ms⁻¹/ 0.032m

v = 9.4 ×10⁹ s⁻¹

v = 9.4 ×10⁹ Hz

To know more about wavelength, visit:

https://brainly.com/question/13533093

#SPJ4

Which option is correct and explain why in detail?

Answers

The statement about the movement of the object that is true is that the object is at rest at position Y. Option D

What is the maximum height?

Let us recall that the projectile is a kind of motion that involves making an object to move along a parabolic path. This parabolic path is a curved path.  A typical example of the projectile motion is the is the image that have been shown in the question.

We can see that the path of the object as it s moving is curved through the points X, Y and Z. One thing that is worthy of note from the diagram s that the lowest point of the object is at point Z and the highest point of the object is at point Y.

Why we need the facts that are mentioned above in mind is that the projectile would have zero velocity at the highest point but would have the highest velocity at the lowest point of its motion.

Learn more about projectile:https://brainly.com/question/11422992

#SPJ1

Assume that the light emitted by a hot filament or hot metal bar is made to pass through a low density gas, and the emergent light is then analyzed in a spectrometer; what kind of spectrum is seen in this case?.

Answers

we will see absorption line spectrum in this case.

We see Absorption lines usually as dark lines, or lines of reduced intensity, on a continuous spectrum. In this example when the light emitted by a hot filament or hot metal bar is made to pass through a low density gas, and the emergent light is then analyzed in a spectrometer, then we can see the absorption spectrum.

Dark line comes When electrons go from one energy level to another, the difference in those energy level is a specific value, and not a range of values. they will absorb the photons if they are transitioning upwards towards a higher energy,  corresponding to the wavelength of light which has the specific amount of energy they need to ascend.

To learn more about absorption line spectrum, visit here

https://brainly.com/question/5032775

#SPJ4

What is one idea why a relatively dense protogalactic cloud more likely to produce an elliptical galaxy than a spiral galaxy?.

Answers

The higher gas density forms stars more efficiently, so all the gas is converted into stars before a disk can form.

What is density ?Density is a measure of how much "stuff" is in a given  space. For example, a block of the heavy element lead (Pb) is denser than the softer, lighter element gold (Au). Styrofoam blocks are less dense than bricks. Defined as mass per unit volume. Object density  is one of the most important and easily measured physical properties. Density is commonly used to identify pure substances and to characterize and estimate the composition of various types of mixtures.The density of an object or substance can be calculated from the formula: Density in kilograms per cubic meter equals mass in kilograms divided by volume in cubic meters  (p = m/v).

To learn more about density  from the given link :

https://brainly.com/question/15164682

#SPJ4

how close were your wavelength measurements to the accepted values of wavelengths for the various gases as listed below? what factors do you think might have contributed to any differences, and how might they have affected your measurements?

Answers

The accepted values of wavelengths for Hydrogen is a simple atom with a simple spectrum. Besides the three lines we may be able to see in 410 nm.

Gamma rays have incredibly short wavelengths that are only a small percentage of the size of atoms, but other wavelengths can extend as far as the cosmos, despite the fact that the relationship between wave frequency and wavelength is inverse. Although it is not often stated explicitly, electromagnetic radiation wavelengths are frequently represented in terms of the vacuum wavelength, regardless of the medium they pass through.

Electromagnetic radiation's behavior is influenced by its wavelength. Wavelength times frequency equals the speed of light. Energy is obtained by multiplying frequency by the Planck constant. The wave number in centimeters is 1/wavelength. A rough estimate of the wavelength size is shown along with the wavelengths of various regions of the electromagnetic spectrum.

To know more about  wavelength visit : brainly.com/question/14530620

#SPJ4

Which of the following potential problems with question wording have been identified by cognitive psychologists? (Check all that apply.) a) unfamiliar technical terms
b) vague or imprecise terms
c) ungrammatical sentence structure
d) phrasing that overloads working memory
e) embedding the question with misleading information

Answers

Option d) phrasing that overloads working memory, potential problems with question-wording have been identified by cognitive psychologists.

Cognitive psychology is the look at mental procedures, along with memory, attention, belief, and language processing, and the way they affect human behavior. Cognitive psychologists expand strategies to assist folks that are experiencing difficulties with one or more of those processes.

Cognitive psychologists normally earn either a Ph. D as a doctor of Philosophy or a Psy. D as a medical doctor of Psychology in cognitive psychology. Similar to psychology coursework, they need education in studies techniques, statistics, neuroscience, and cognitive mastering.

Learn more about cognitive psychologists here:-https://brainly.com/question/9262081

#SPJ4

What is the mass of an object if it takes a net force of 1,022 N to accelerate at a rate of 24 m/s2?
find A, Fn, and Fg

Answers

42.58 kg is the mass of an object if it takes a net force of 1,022 N to accelerate at a rate of 24 m/s2

F=ma

F= force=  1,022 N

m= mass=?

a=acceleration=24 m/s2

F=ma

a=F/m

a= 1,022 N/24 m/s2

a=42.58 kg

In physics, mass is used to express inertia, a property common to all matter. In essence, it is the resistance of a mass of matter to changing its course or speed in response to the application of a force.

The more mass a body has, the less of a change an applied force makes. Using Planck's constant, the kilogram, the ISU's unit of mass, is equivalent to 6.62607015 1034 joule seconds (SI). One kilogram is multiplied by one square meter per second to yield one joule.

Since the second and the meter have already been defined in terms of other physical constants, the kilogram is determined by precise measurements of Planck's constant.

To know more about  mass visit : brainly.com/question/6782334

#SPJ9

a stone is dropped from the top of a high cliff with zero initial velocity. in which system is the net momentum zero as the stone falls freely? 1. the stone and the earth 2. none of these 3. the stone itself 4. the stone and the person who drops it

Answers

The system with stone and the earth , result to net momentum zero as the stone falls freely.

A stone is thrown down from a high cliff's edge. If the stone and Earth are the only components of the system, then the stone's initial momentum is zero and it does not experience any external forces as it descends. As the stone falls, the system's momentum is zero.

What is linear momentum?

According to the conservation of initial momentum principle, the sum of the initial and final momentums is equal.

m₁u₁ ₊ m₂u₂ = m₁u₁ ₊ m₂u₂

A system made up of a linear system of earth and stone may have zero net momentum.

Therefore, a system of stone and earth can result to a net zero momentum.

To learn more about linear momentum

Here: https://brainly.com/question/15869303

#SPJ4

The system with stone and the earth , result to net momentum zero as the stone falls freely.

What is linear momentum?

According to the conservation of initial momentum principle, the sum of the initial and final momentums is equal.

m₁u₁ ₊ m₂u₂ = m₁u₁ ₊ m₂u₂

A stone is thrown down from a high cliff's edge. If the stone and Earth are the only components of the system, then the stone's initial momentum is zero and it does not experience any external forces as it descends. As the stone falls, the system's momentum is zero. A system made up of a linear system of earth and stone may have zero net momentum.

Therefore, a system of stone and earth can result to a net zero momentum.

To learn more about linear momentum
brainly.com/question/15869303

#SPJ4

A 20 m long, uniform bridge of weight 100 kN is supported at each end by pillars, as shown. The pillars exert forces T₁ and T2 on the ends of the bridge. What are the values of T₁ and T2 when a van of weight 24 kN is on the bridge, 5 m from the left-hand pillar?​

Answers

Answer  

T1=68 kN

Explanation:

A 20 m long, uniform bridge of weight 100 kN is supported at each end by pillars, as shown. The pillars exert forces T₁ and T2 on the ends of the bridge. What are the values of T₁ and T2 when a van of weight 24 kN is on the bridge, 5 m from the left-hand pillar is T1=68 kN

What are the types of force ?

Force can be defined as pushing or pulling of any object resulting from the object’s interaction or movement, without force the objects can not be moved, can be stopped or change the direction.

Force is a  quantitative interaction between two physical bodies, means an object and its environment, there are different types of forces in nature.

If an object in its moving state will be either static or motion, the position of the object will only be changed if it is pushed or pulled and The external push or pull upon the object called as Force.

The contact force types  are the force that occurs when we apply some effort on an object such as Spring Force, Applied Force, Air Resistance Force, Normal Force, Tension Force, Frictional Force

Non-Contact forces are another type of forces occur from a distance  such as Electromagnetic Force, Gravitational Force, Nuclear Force

For more details Force,  visit

brainly.com/question/13691251

#SPJ2

Do you think that the seeds of gymnosperms would likely be dispersed by animals?

Answers

Seeds of gymnosperms likely are not dispersed by animals because they are not enclosed in a fruit as occurs with angiosperm seeds.

What are gymnosperms and angiosperms?

Gymnosperms and angiosperms are different taxonomic groups of seed plants, which have certain particular features such as the presence of fruits angiosperms, it being an adaptive advantage for the dispersion of seeds through animals.

Therefore, with this data, we can see that gymnosperms and angiosperms are different groups of seed plants and angiosperms are evolutionary are more adapted to disperse their seed through animals due to the presence of fruits.

Learn more about angiosperms here:

https://brainly.com/question/25768035

#SPJ1

an archer shoots a bow horizontally from the same height as the target's bull's-eye, located 25.2 m away. the bow is shot with a speed of 76.9 m/s. how far below the center of the bull's-eye does the arrow hit the target?

Answers

The calculated value is a = 16.24°. If the initial speed is the same, launch angles closer to 45° 45° 45° give a longer maximum horizontal distance (range).

These launches have a better balance of the initial velocity components that optimize the horizontal velocity and time in the air. The black dots represent measurements, such as the estimated 3D locations of the object based on the 2D images, while the bullseye represents the true value, such as the true location of the object. Let a be the projectile's angle.

37 sin a° is the vertical component.

Vertical component: 37 cos °

Time to achieve peak height equals (37 sin a°)/9.8

[2(37 sin a°)/9.8](37cos a°)(horizontal travel) = 75

75*9.8/37*37 = 2sin a° + cos a°

sin 2a° = 0.537

2a° = 32.47°

a = 16.24°

Learn more about velocity here-

https://brainly.com/question/18084516

#SPJ4

What does "jettison" mean? Why are parts of the spacecraft jettisoned?

Answers

Answer: 1. throw or drop (something) from an aircraft or ship

2.to ensure mission success just in case the first one fails.

Explanation:

there are two reasonable approximations to consider for the pencil in this problem: a cylinder and a thin rod. however, in this problem we will treat the pencil as a uniform thin rod of length 15.0 cmcm and mass 10.0 gg .

Answers

The axis of rotation of the pencil passes through point B.

Draw the free-body diagram of the pencil which touches the surface at point B. The normal force from the surface acts on the pencil at point B. The weight of the pencil acts in a vertically downward direction at the center of mass of the pencil, which is at point C. There is a friction force that opposes the motion of the pencil on the surface.

Since the pencil touches the surface at point B, the weight of the pencil produces torque and makes the pencil rotate about point B, and this is the point through which the axis of rotation for the pencil passes.

The weight of the pencil acts in a vertically downward direction at the center of mass of the pencil, that is, at point C. Since, the pencil touches the surface at point B, the force due to the weight of the pencil produces torque and makes the pencil rotate about point B.

Learn more about torque here:-https://brainly.com/question/20691242

#SPJ4

The velocity selector in in a mass spectrometer consists of a uniform magnetic field oriented at 90 degrees to a uniform electric field so that a charge particle entering the region perpendicular to both fields will experience an electric force and a magnetic force that are oppositely directed.

If the uniform magnetic field has a magnitude of 12.1 mT, then calculate the magnitude of the electric field that will cause a proton entering the velocity selector at 43.4 km/s to be undeflected. Give your answer in units of kV/m.

Answers

The magnitude of the electric field that will cause a proton to enter the velocity selector and to be undeflected is 0.525 kV/m.

When a proton enters a region with a uniform electric and magnetic field, the magnetic force and the electric force will affect the motion of the protons. The electric field is perpendicular to the velocity of a proton. The magnetic field is perpendicular to both the velocity of the proton and the electric field and has an opposite direction to the electric force. When the proton is undeflected it means the forces balance.

F electric = F magnetic

qE = qvB

E = vB

[tex]v = \frac{E}{B}[/tex]

v = velocity of the proton (m/s)E = the magnitude of the electric field (V/m)B = the magnitude of magnetic field (T)

Parameter

B = 12.1 mT = 12.1 x 10-3 T = 1.21 x 10-2 Tv = 43.4 km/s

Convert velocity to m/s

[tex]v = 43.4 \times \frac{1 \: km}{1 \: s} = 43.4 \times \frac{1,000 \: m}{1 \: s}[/tex]

v = 43.4 x 103 m/s

v = 4.34 x 104 m/s

Calculate the magnitude of the electric field

E = B x v

E = 1.21 x 10-2 x 4.34 x 104

E = 525.14 V/m

[tex]E = \frac{525.14}{1,000}[/tex]

E = 0.525 kV/m

Learn more about velocity selector here: https://brainly.com/question/15071884

#SPJ4

What is the acceleration of a vehicle that
changes its velocity from 300 km/h to a dead
stop in 20 s ?
Answer in units of m/s
2

Answers

15m/s2
this is because acceleration=v/t=300/20=15

How an electric car might still run on fossil fuel

Answers

Answer:

Below

Explanation:

Incredible amounts of fossil fuels are used to mine for materials, buil and transport electric vehicles

Electric vehicles use electricity to charge their batteries.  Most electricity is generated using fossil fuels such as natural gas and coal .    

a rocket takes off from earth and reaches a speed of 130 m/s in 19.0 s. if the exhaust speed is 1,200 m/s and the mass of fuel burned is 150 kg, what was the initial mass (in kg, including the initial fuel) of the rocket?

Answers

The initial mass of the rocket will be 526.2 kg

As we know,

Final speed = 105 m/s

Time = 18.0 s

Exhaust initial speed = 1200 m/s

Mass of burned fuel = 150 kg

We need to calculate the initial mass Which would be 526.2 kg.

What do you mean by Initial and final mass?

The mass of an object at the starting point is known as initial mass while the mass which remains at the last is called Final mass. The Initial Mass Function (IMF) is usually expressed as a power law,

IMF = constant × m −α.

Hence, in the above case we have found the initial mass from the given formula.

To know more about Initial energy from the given link

https://brainly.com/question/19371726

#SPJ4

Two tream merge to form a river. One tream ha a width of 8. 2 m, depth of 3. 4 m,
and current peed of 2. 3 m/. The other tream i 6. 8 m wide and 3. 2 m deep, and flow at
2. 6 m/. If the river ha width 10. 5 m and peed 2. 9 m/, what i it depth?

Answers

The depth is 3.96 m. The depth of a lake or pond is the distance from something's top to its bottom or to a point farther below the surface of anything.

Real Depth refers to an object's actual depth below the surface, as determined by submerging a perfect ruler alongside it. The depth of an object in a denser medium as seen from a rarer medium is known as the apparent depth in that medium. Its value is smaller than the real depth. Apparent depth is the perception of depth in a picture formed by a combination of the range of wavelengths visible to the human eye and the physical qualities of light.

AV= A1V1+ A2V2

= 8.2*3.4*2.3+ 6.8*3.28*2.6

=3.96 m.

Learn more about depth here-

https://brainly.com/question/17157366

#SPJ4

Other Questions
Use the properties of logarithms to expand the expression as a sum, difference, and/or constant multiple of logarithms. (Assume the variable is positive.) ln x^2-1/x^7 , x>1 paraphrase: But Flynn let drive a single, to the wonderment of all, And Blake, the much despised, tore the cover off the ball; And when the dust had lifted, and men saw what had occurred, There was Jimmy safe at second and Flynn a-hugging third. [4] Which of these substances contains a compound made up of exactly 2 different types of atom? WILL GIVE BRAINLIESTWhat do Manuel and his friends do in their leisure time? Choose the most logical verb in parentheses and write it in present tense. Huda sees an obvious set of fingerprints on a mirror at a crime scene. How can she BEST preserve this evidence? A. Sketch the shape of the prints. B. Cut the fingerprints out of the mirror. C. Use clear tape to lift the prints. D. Make a plaster mold of the prints. Divide f(x) by d(x). Your answershould be in the following format:f(x)d(x)f(x)d(x)Q(x) +=4x8x+2x12x + 1[?]R(x) = -R(x)d(x) If a program needs to display, for example, some initial data in a Label component when the application starts running, this can be done by including an Init module. True or False A jar contains 7 red marbles and 10 blue marbles. What is the probability of choosing a blue marble? This answer should be written as a decimal. Answer to two decimal places. an animal trainer is teaching a golden retriever to hit a basketball with his nose into a basketball hoop. initially, he gives the dog a treat for touching the ball with his nose, then for hitting the ball when it's thrown to him, and then for hitting the ball towards the hoop. the trainer is using the method of Great leaders do not just get results because they are strong and professional they also get them because they make others feel capable ofperforming well.A. TrueB. False What about Wang's statement "Chinese nationalism is neither religiously, ethnically, nor ideologically based?" (Without plagiarizing write 200 words please) What is Age distribution a(n) ? is typically installed at each end of a utp backbone cable that has a corrugated aluminum shield over the core for the purpose of grounding the cable. the best way to maintain your credit standing is to: multiple choice declare a chapter 7 bankruptcy. use credit sparingly. repay your debts on time. use as many credit cards as you can. pay cash for your purchases. Human blood flows from the aorta to the capillaries. A girl has an aorta radius of 12.6 mm. Assume she has 7 billion capillaries in the body, the capillaries radius average 4 m (micrometer), and the blood speed average 0.5 mm/s in the capillaries. The blood speed is _____ mm/s in the aorta. A company producing cosmetics may have hundreds of suppliers, some of which may be selling the same or similar raw and packaging materials to other cosmetics manufacturing companies. In addition, that same cosmetics manufacturer may sell to a retailer that buys similar cosmetics from a number of other manufacturers. This scenario illustrates?. 2. Precipitation is one of the many ways that water is cycled from the atmosphere to Earth and or the Ocean. What are the ways that we describe precipitation? A. Solid, liquid, fog B. Liquid, condensation, solid C. Rain, sleet, snow, hail D. Rain, sleet, fog, liquid Object A is positiveObject A repels object BObject B I attracted to objects C and DWhen C is touched to an electroscope, nothing happens.When object D touches an electroscope, the leaves repel.What are the charges of objects B,C and D? Explain your reasoning. (3 pts) How successful was the Muslim league in the 1937 elections? with respect to government-wide statement, which of the following statements is correct? a. general capital assets should not be reported as assets in governmental funds but should be reported in the governmental activities column of the government-wide statement of net position. b. gasb requires a reconciliation from proprietary fund financial statements to the government-wide statements business-activities columns from modified accrual accounting to accrual accounting. c. in addition to the fund-basis statement, gasb requires government-wide statements that are prepared on the modified accrual basis using the economic resources measurement focus. d. fiduciary activities are reported in the government-wide statements in a separate column.