Which formula represents a polar molecule?
C12
N2
CC14
HCI

Among the following (a) CH₃CH₂CH₃ has the lowest viscosity as a liquid.

A liquid's ability to flow is due to the fact that its molecules can move around and around each other. The degree to which a substance resists flow is referred to as its viscosity. High viscosities are exhibited by liquids such as glycerin and honey, which a very lower flow rate. Those with low viscosities, such as ether or gasoline, have excellent flow characteristics.

The magnitude of the intermolecular forces and, more specifically, the structures of the molecules that make up a liquid are what determine its viscosity. In general, liquids with molecules that are polar or that are capable of forming hydrogen bonds have a greater viscosity than comparable nonpolar substances.

(A) The intermolecular force of attraction in CH₃CH₂CH₃ is provided by hydrogen bonds. Because the hydrogen bonding is so much stronger than the dispersive force, it results in a significantly higher viscosity.

You can also learn about viscosity from the following question:

https://brainly.com/question/13385698

#SPJ4

The substances given in the task above are correctly classified as either atomic element, molecular element, molecular compound, or ionic compound as follows:

A compound can simply be defined as a chemical substance which is formed as a result of the chemical attraction between two or more elements. In order words, a compound is made or formed from two or more elements. A compound is chemically combined together

From the task given above, Carbon monoxide, CO and Lead iodide, PbI4 are typical examples of a compound.

That being said, an atom is the smallest particle of an element which can take part in a chemical reaction. Fluorine, F₂ is an atomic element.

So therefore, we can now confirm and deduce from the explanation given above that a compound contains at least two or more different elements.

Read more on compounds:

https://brainly.com/question/26487468

#SPJ1

The number of moles of Al, S, and O atoms in 5.00 moles of Al₂(SO₄)₃ is equal to 10 mol, 15 mol, and 60 mol respectively.

A mole can be described as a scientific unit to calculate the quantity of a given substance and generally the huge number of quantities of molecules, atoms, ions, or other particular particles.

The number of elementary units in one mole was found to be equal to 6.023 × 10 ²³ which is known as Avogadro’s number.

Given the number of moles of  Al₂(SO₄)₃ = 5 mol

One mole of  Al₂(SO₄)₃ contain Al = 2 moles

Then 5 mol of  Al₂(SO₄)₃ contain Al = 2 × 5 = 10 mol

One mole of  Al₂(SO₄)₃ contain S = 3 moles

Then 5 mol of Al₂(SO₄)₃ contain S = 3 × 5 = 15 mol

One mole of  Al₂(SO₄)₃ contain Oxygen (O) = 12 moles

Then 5 mol of  Al₂(SO₄)₃ contain Al = 12 × 5 = 60 mol

Learn more about the mole, here:

brainly.com/question/26416088

#SPJ1

Your question is incomplete, most probably the complete question was:

Calculate the number of moles of aluminum, sulfur, and oxygen atoms in 5.00 moles of aluminum sulfate,  Al₂(SO₄)₃. Express the number of moles of Al, S, and O atoms numerically, separated by commas.

The table best matches each form of energy to Jennifer's actions is A.

Energy is defined as the capacity to labor long hours or be extremely busy without becoming exhausted. Red blood cells, which carry oxygen in the blood throughout the body, are created by vitamin B12 in the body. Your body's cells use the oxygen once it gets there to produce energy.

Electrical energy, chemical energy obtained from fuels, food, and energy derived from the sun are the major types of energy used in our homes. Everyday appliances convert electrical energy into a variety of forms, including mechanical/kinetic, sound, heat, light, and other types of electromagnetic radiation.

Thus, the table best matches each form of energy to Jennifer's actions is A.

To learn more about energy, refer to the link below:

https://brainly.com/question/1932868

#SPJ1

Answer: 672.2 grams

Explanation:

With 564.1 kJ of heat energy, [tex]564.1/38.6=14.613989637306[/tex] moles of ethanol can be combusted.

So, we need to find the formula mass of ethanol.

Therefore, the mass of ethanol is [tex](46)(14.613989637306)=672.2[/tex] grams.

Answer:

The volume of a gas that had an initial volume of 73.5 mL at 0 C and is warmed to 25 C would be approximately 1837.5 mL. This is based on the Ideal Gas Law, which states that the volume of a gas is directly proportional to its temperature as long as the pressure and number of moles of the gas remain constant.

Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, 80.2ml the volume of a gas that had an initial volume of 73.5 mL at 0 °C, and is warmed to 25°C.

Ideal gas equation is the mathematical expression that relates pressure volume and temperature. There is no force of attraction between the particles. Vanderwaal gas behaves as ideal gas at low pressure and high temperature.

Mathematically the relation between volume and temperature can be given as

PV=nRT

Rearranging the equation we get

V₁÷T₁=V₂÷T₂

where,

V=Volume

T =temperature

Substituting all the given values, we get

73.5÷273=V₂÷298

V₂=80.2ml

Therefore, 80.2ml the volume of a gas that had an initial volume of 73.5 mL at 0 °C, and is warmed to 25°C.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ2

By defending crops from pests and diseases and increasing yield, pesticides play a significant part in ensuring global food security.

Because some pesticides residues gather in fat, trim any excess fat from the meat, skin, and bones of poultry and fish. CHOOSING A VARIATION OF FOODS Consume a variety of foods from different sources. You will receive a better variety of nutrients as a result, and your risk of pesticide exposure will be lower. Pesticide residue testing is a procedure that determines the amounts of pesticide residue in food items by a thorough chemical and microbiological analysis, giving food producers and manufacturers assurance in the components of their products.

Learn more about pesticides here-

https://brainly.com/question/12284986

#SPJ4

The intermediate shown converts a ketone or aldehyde into what functional group is Alkyne

Alkynes, a chemical compound. Alkynes are defined as molecules with a triple bond between two carbon atoms. One bond and two bonds combine to form the triple bond.

Alkynes are hydrocarbons that have triple bonds between carbon atoms. The typical formula for molecules with one triple bond is CnH2n-2 (and no rings). Alkynes undergo many of the same reactions as alkenes, but because the triple bond contains two p-bonds, they can react twice.

Due to the compound's unsaturation, two carbon atoms that form double bonds trade the excess electrons with regard to hydrogen atoms. Alkynes from the first component in the chain are additionally frequently referred to as ACETYLENES.

To learn more Alkynes refer to :

https://brainly.com/question/23819791

#SPJ1

A chemical bond is a permanent attraction between atoms or ions that allows the formation of molecules and crystals. Bonding can result from electrostatic forces between oppositely charged ions, as in ionic bonding, or through sharing of electrons, as in covalent bonding.

To know more about chemical bonds, visit:

https://brainly.com/question/15444131

#SPJ1

Answer: When we switch on a fan, the fan converts a significant portion of the electrical energy into kinetic energy of the fan blades. Some part of electric energy is converted into heat.  energy transformation will be:-

Electrical energy → Kinetic energy

Explanation:

C) Their structure is related to their function

DNA (deoxyribonucleic acid) is the genetic material of humans and almost all other organisms. mostly every cell in the human body has the same DNA. Most DNA is found in the nucleus of cells, but small amounts of DNA can also be found in the mitochondria, also called mtDNA. Mitochondria are structures within cells that convert food energy into a form the cell can use

Mutation is one of the functions of DNA.  A mutation is a change in the DNA sequence of an organism. Mutation can occur because of many circumstances. Our DNA has gone through mutations that created humans out of monkeys. the evolution of mankind is because of mutation in DNA.

To learn more about mutation click here: https://brainly.com/question/28817858

The correct order of in which this process happens is given below :

3. K+ ions flow out of neurons increases

5. Opening of voltage-gated Na+ channels

4. Na+ ion flow into the neuron increases

2. Depolarization of the membrane

1. Repolarization of the membrane

Hyperpolarization is when the membrane potential becomes more negative at a particular spot on the neuron’s membrane, while depolarization is when the membrane potential becomes less negative (more positive). Depolarization and hyperpolarization occur when ion channels in the membrane open or close, altering the ability of particular types of ions to enter or exit the cell.

Learn more about depolarization here:

brainly.com/question/29698882

#SPJ4

Red, Green, and Blue of both the SN2 reaction are the nucleophile, electrophile, and leaving group in the proper order, according to the provided statement.

A nucleophile is a reagent that transports an electron pair. Curved-arrow notation shows the transfer of such a pair of electrons from of the nucleophilic attack to the electrophile. Negatively charged species like the NC - ion of cyanide serve as an illustration of a nucleophile.

Christopher Kelk Ingold replaced the words anionoid and cationoid, first suggested by A. J. Lapworth in 1925, with nucleophile and electrophile in 1933. The Greek word o, philos, which means friend, is taken from the term nucleus to get the phrase nucleophile.

To know more about nucleophile visit:

https://brainly.com/question/29563504

#SPJ4

Propan-1-ol can also be produced by hydroboration oxidation reaction.This reaction is known as the hydroboration reaction and obeys the anti-Markovnikov rule.

B2H6 reacts with propene along with hydrogen peroxide, converting it to 1-propanol. This reaction is known as the hydroboration reaction and obeys the anti-Markovnikov rule. Propene adds to diborane to form adducts. The adduct gives 1-propanol upon oxidation.

The reagents used for the dehydration of propan-2-ol to propene are concentrated phosphoric acid or concentrated sulfuric acid. Propanone can be converted to propane-2 by reducing the ketone. A ketone is reduced to a secondary alcohol. Ketones can be reduced by hydrogenation with a Grignard reagent. To convert propene to propan-1-ol, the method of reacting propene with peroxide is used.

Learn more about The reagents here:- https://brainly.com/question/6959208

#SPJ4

The mass of the object of density 5g/cm³ and volume 10 cm³ is 50kg.

Defining density How tightly a material is packed together is determined by its density. Its definition is "mass per unit volume". D or, the symbol for density

Density Formula: = m/V,

where is the density, m is the object's mass, and V is its volume.

The units used change depending on the calculation's use of mass and volume units. Density would be expressed in kg/cm³ if the mass is expressed in kg and the volume in cm³.

Density = mass / volume

Mass = density ×  volume

Mass =  5×10

Mass = 50 kg.

To know more about density, visit:

https://brainly.com/question/6107689

#SPJ1

If 2 moles of B react with 1 mole of A, the quantity of moles of C that are formed upon complete reaction is 2 moles.

How mole is conserved in chemical reaction?

Because there are always the same amounts of reactants and products present in a chemical reaction, the mole is conserved. The law of conservation of mass states that the total masses of the reactants and products in a chemical reaction are equal, governs this idea.

The idea of molecular weight can be used to translate the law of conservation of mass into moles. The mass of one mole of a substance, measured in grammes, is its molecular weight. For instance, water (H2O) has a molecular weight of 18.015 g/mol, which indicates that one mole of water weighs 18.015 grammes.

The law of conservation of mass can be stated as follows when describing a chemical reaction in which two reactants, A and B, react to form two products, C and D: In the equation n(A) + n(B) = n(C) + n(D), n(A) denotes the quantity of reactant A, n(B) the quantity of reactant B, n(C) the quantity of product C, and n(D) the quantity of product D. According to this equation, there are exactly as many moles of reactants as there are of products. Because the total number of reactant and product moles stays constant throughout the reaction, this indicates that the mole is conserved in chemical reactions.

It's crucial to remember that regardless of the type of reactants or products involved, the law of conservation of mass holds true for all chemical reactions. This principle, which is a fundamental law of chemistry, is crucial for comprehending how matter behaves.

According to the problem:

In the chemical reaction A+2B=C, the quantity of moles of C that are formed upon complete reaction depends on the number of moles of A and B that are present.

According to the given information, 2 moles of B react with 1 mole of A to form C. This means that the ratio of B to A is 2:1, and the ratio of C to A is 1:1.

To determine the number of moles of C that are formed upon complete reaction, use the mole ratios to calculate the number of moles of C that are produced for every mole of A that is consumed. In this case, 1 mole of A reacts with 2 moles of B to produce 1 mole of C.

Therefore, if 2 moles of B react with 1 mole of A, the quantity of moles of C that are formed upon complete reaction is 2 moles. This is because 2 moles of B are equivalent to 1 mole of C, and the mole ratio between B and C is 2:1.

To know more about mole, visit:

https://brainly.com/question/15442173

#SPJ1

Potassium fluoride, KF(s), a strong electrolyte, fully dissociates when dissolved in a solution.

When dissolved in water, chemicals known as electrolytes acquire a natural negative or positive electrical charge. They support a variety of bodily functions, including maintaining the harmony of fluids within and outside of your cells and regulating chemical processes.

Because glucose can aid in hydration, many people believe it must be an electrolyte. Sugar, however, isn't an electrolyte. Instead, it's a carbohydrate which fuels your body by turning glycogen reserves in your muscles into energy.

To know more about electrolyte visit :

https://brainly.com/question/28699046

#SPJ4

According to molar concentration, the molarity  of copper(II) chloride  solution is 4.054 M.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.

Substituting values in the given formula, molarity= 120/134.45×1/0.22=4.054 M.

Thus the molarity of copper (II) chloride is 4.054 M.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ1

Answer:

The temperature of the iron sample from 20°C to 84°C is 20999.6 J.

Explanation:

To determine the amount of heat needed to increase the temperature of a substance, you can use the following formula:

Q = m * c * ΔT

Where Q is the amount of heat, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

In your case, the mass of the iron sample is 540.6 g, the specific heat capacity of iron is 0.450 J/g · C, and the change in temperature is 84°C - 20°C = 64°C. Plugging these values into the formula, we get:

Q = 540.6 g * 0.450 J/g · C * 64°C = 20999.6 J

Therefore, the amount of heat needed to increase the temperature of the iron sample from 20°C to 84°C is 20999.6 J.

Answer: To find the value of x, we need to determine the proportions of the two gases in the mixture. We can do this by using the information provided about the total carbon and hydrogen content of the mixture.

First, we need to calculate the total mass of carbon and hydrogen in the mixture. We know that the mixture contains 87% carbon and 13% hydrogen, so the total mass of carbon is 87% * 41.4 g = 36.198 g. Similarly, the total mass of hydrogen is 13% * 41.4 g = 5.382 g.

Next, we can use the ideal gas law, which states that PV = nRT, to determine the number of moles of each gas in the mixture. Here, P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in kelvin.

We know the pressure, volume, and temperature of the mixture, and we can use the atomic weights of carbon and hydrogen to calculate the number of moles of each gas. The atomic weight of carbon is 12.01 g/mol and the atomic weight of hydrogen is 1.008 g/mol.

Let's first find the number of moles of carbon in the mixture:

n(C) = (PV) / (RT)

= (1.56 atm * 10 L) / (0.08206 Latm/molK * (317.15 K))

= 0.1039 mol

Next, let's find the number of moles of hydrogen in the mixture:

n(H) = (PV) / (RT)

= (1.56 atm * 10 L) / (0.08206 Latm/molK * (317.15 K))

= 0.0161 mol

Finally, we can use the ratio of the number of moles of each gas to determine the value of x. We know that the gas mixture contains a total of 0.1039 mol of carbon and 0.0161 mol of hydrogen. The ratio of the number of moles of carbon to the number of moles of hydrogen is therefore 0.1039 mol / 0.0161 mol = 6.4.

Since we are looking for the value of x, we can express this ratio as CxH8 / CxH12. This gives us the equation:

(CxH8) / (CxH12) = 6.4

Solving this equation gives us x = 6.4, so the value of x is 6.4.

I hope this helps! Let me know if you have any questions.

During resonance, the molecule's electrons remain stationary. A probability cloud of electrons is what we can make out. Chlorination, bromination, nitration, and sulfonation are the six primary electrophilic aromatic substitution processes.

What is aromatic substitution?

They were provided the arrow-pushing mechanism for the following general electrophilic aromatic substitution process, which involved benzene and Turk. When benzene and bromine combine in an abrasive environment, liquid bromine, no solvent, and the Lewis acid FeBr3 act as catalysts. An atom that is connected to an aromatic ring is replaced with an electrophile in electrophilic aromatic substitution processes. a comprehensive arrow pushing mechanism for an electrophilic substitution of any kind of aromatic molecule.

To learn more about electrophilic substitution from given link

brainly.com/question/21773561

#SPJ4

The limiting reagent is O₂ because there is only 24.2 mol of O₂ available for the reaction, and 8.24 mol of P4 is needed to react with all of the O₂.

Reaction is a response to a stimulus or event. It is an action or behavior that is often automatic and instinctive. Reactions can be emotional, biological, chemical, or physical. Examples of reactions include fear, laughing, crying, or sweating. Reactions can also be mental, such as forming an opinion or making a decision. Depending on the context, a reaction can be positive or negative. A reaction can be short lived, or it can cause a longer lasting impact. Understanding reactions is important for many fields, such as psychology, sociology, and medicine.

a. The limiting reagent is O₂ because there is only 24.2 mol of O₂ available for the reaction, and 8.24 mol of P4 is needed to react with all of the O₂.
b. 12.1 mol of P2O5 (s) will be produced.
c. The number of grams of P₂Oᴸ (s) produced can be calculated using the molar mass of P₂Oᴸ (s). 12.1 mol of P2O5 (s) has a mass of 283.9 g.

To learn more about reaction
https://brainly.com/question/24795637
#SPJ1

Aldol reaction followed by dehydration to produce enone are the two main phases that make up the entire process.

The mechanism for the acid-catalyzed hydration of an alkene involves two stages. Aldol condensation produces a substance known as -hydroxy aldehyde or -hydroxy ketone. A conjugated enone is created when an enolate ion interacts with another carbonyl molecule in aldol condensation. The procedure consists of two steps: an aldol reaction that yields an aldol product and a dehydration reaction that produces the finished product by removing water from the mixture. The aldol condensation reaction occurs with aldehydes that include alpha hydrogen atoms. Since benzaldehyde lacks an alpha hydrogen, aldol condensation cannot occur. There is at least one alpha hydrogen in each and every alternative.

Learn more about reaction here-

https://brainly.com/question/28984750

#SPJ4

Answer:

T=731.0 K

Explanation:

According to the Ideal Gas Law, pV=nRT where

p=pressure in atm

V=volume in L

n=moles of gas

R=Ideal Gas Constant (0.08205 [tex]\frac{L*atm}{mol*K}[/tex])

T=temperature in K

To calculate the moles of carbon dioxide, first calculate the molecular weight:

[tex]C=12.01\frac{g}{mol}\\O=16.00\frac{g}{mol}[/tex]

So,

[tex]MW\ CO_2=12.01\frac{g}{mol}+2(16.00\frac{g}{mol})=44.01\frac{g}{mol}[/tex]

Then use the molecular weight to convert grams to moles:

[tex]0.220g\ CO_2(\frac{1\ mol\ CO_2}{44.01\ g\ CO_2})=5.0x10^{-3}\ mol\ CO_2[/tex]

So, for this problem, let

p = 0.60 atm

V = 0.50 L

n = [tex]5.0x10^{-3}[/tex] moles

R = 0.0821 [tex]\frac{L*atm}{mol*K}[/tex]

So,

[tex](0.60\ atm)(0.50\ L)=(5.0x10^{-3}mol)(0.0821\frac{L*atm}{mol*K})T\\T=\frac{(0.60\ atm)(0.50\ L)}{(5.0x10^{-3}mol)(0.0821\frac{L*atm}{mol*K})}\\T=731.0\ K[/tex]

The energy produced per one photon at a wavelength of 529 nm is 3.75 × 10⁻¹⁹ J. Thus, 0.536 J corresponds to 1.42 × 10¹⁸.

As per DE Broglie's duel nature of matter, light behave as wave as well as particle. The light particles with certain energy is called a photon. A photon has the energy of hv.

Given the wavelength  = 529 nm

Energy of one photon = [tex]\frac{hc}{\lambda}[/tex]

= (6.62× 10⁻³⁴J s × 3 × 10⁸ m/s) / 529 × 10 ⁻⁹ m

= 3.75 × 10⁻¹⁹ J.

The total energy  = 0.536 J

Thus, number of photons = total energy/ energy of one photon

                                           = 0.536 / (3.75 × 10⁻¹⁹ J) = 1.42 × 10¹⁸.

Therefore, the number of photons will be 1.42 × 10¹⁸.

To find more on photon energy, refer here:

https://brainly.com/question/2393994

#SPJ1

Part III:

Water Molecule are Attracted to Chlorine.

What is meant by water molecule?

The water molecule is made up of two hydrogen atoms connected by a single chemical bond to an oxygen atom. Most hydrogen atoms have a proton-only nucleus.

Part IV:

Polar substances are likely to dissolve in polar solvents. For example, ionic compounds, which are very polar, are often soluble in the polar solvent water.

Which is an ionic compound?

Ionic compounds are ion compounds. These ions are atoms that gain or lose electrons, resulting in a net positive or negative charge. Metals tend to lose electrons, resulting in a net positive charge and transformation into cations. Non-metals tend to gain electrons, resulting in anions with a net negative charge.

Part V:

Powdered sugar or granulated sugar will dissolve the fastest.

Hence above given is a correct answer.

To know more about water molecule follow link

https://brainly.com/question/8404858

#SPJ4

You would find coffee-flavored buttercream in a mocha torte.

The essential ingredients for chocolate cake—flour, sugar, eggs, vanilla extract, baking powder, and two kinds of chocolate—are the foundation of this mocha cake recipe. I use espresso powder, which is accessible in most grocery shops' coffee aisles, to create the mocha flavor.

A torte is a dense, frequently stacked cake that has whipped cream, buttercream, mousse, jam, or fruit as its filling.

By definition, a torte is a sort of cake. They typically cost more because they use higher-quality ingredients. Their name is a translation of the German word for cake, torte. They are a specialty of Europe, and the majority of the well-known torte recipes originate here.

For more information on torte kindly visit visit to

https://brainly.com/question/13449948

#SPJ4

Answer:

The correct answer is:

K2Cr2O7, because the oxidation number of Cr changes from +6 to +3.

Explanation:

In this reaction, K2Cr2O7 is the reactant that acts as an oxidizing agent. An oxidizing agent is a substance that causes another substance to be oxidized (to lose electrons). In this case, the oxidation number of Cr in K2Cr2O7 changes from +6 to +3 as it is oxidized by HCl. This indicates that K2Cr2O7 is acting as the oxidizing agent in the reaction.

HCl is not acting as an oxidizing agent in this reaction. The oxidation number of H in HCl does not change, and the oxidation number of Cl changes from -1 to 0, which indicates that it is being reduced (gaining electrons).

It's important to note that the concept of oxidation numbers is used to keep track of the electrons that are transferred during a chemical reaction. The oxidation number of an element in a compound is a measure of the degree to which it has been oxidized or reduced. In general, an element that has a higher oxidation number before a reaction will have a lower oxidation number after the reaction, indicating that it has been reduced, while an element with a lower oxidation number before the reaction will have a higher oxidation number after the reaction, indicating that it has been oxidized.

Indicators are weak acids or bases that exhibit a color change as hydrogen ion concentration in a solution varies or as a solution's pH changes.

In the water, the indicators gently separate to produce ions.

The three examples of indicators are