which element is reduced in this reaction? 2cr(oh)3 3ocl− 4oh−→2cro4−2 3cl− 5h2o

We can calculate the pH by considering the concentration of HCl in the solution after the titration.

To calculate the pH after adding 30.0 mL of the titrant (0.1 M HCl) to 25.0 mL of 0.1 M NaF, we need to consider the reaction that occurs between NaF and HCl.

NaF(aq) + HCl(aq) → NaCl(aq) + HF(aq)

In this reaction, NaF reacts with HCl to form NaCl and HF. HF is a weak acid, so its dissociation in water will contribute to the overall pH of the solution.

Since we are adding a strong acid (HCl) to a weak acid (HF), the pH of the solution will be determined mainly by the strong acid. Therefore, we can calculate the pH by considering the concentration of HCl in the solution after the titration.

By calculating the moles of HCl added and knowing the initial volume and concentration of NaF, we can determine the concentration of HCl in the final solution and use it to calculate the pH.

To know more about titration, refer here:

https://brainly.com/question/31271061#

#SPJ11

In the given figure, a proton is moving with a velocity v perpendicular to a uniform magnetic field B.

As a result, a force acts on the proton that can be determined using the right-hand rule.For this purpose, the thumb, forefinger, and middle finger of the right hand are used.

If the thumb is pointing in the direction of the velocity of the proton v and the forefinger in the direction of the magnetic field B, the force acting on the proton can be found by curling the middle finger toward the palm of the hand. This force is found to be perpendicular to both the velocity of the proton v and the magnetic field B.

Therefore, the direction of the force on the proton is perpendicular to both the velocity and the magnetic field. This is known as the Lorentz force and is given by the equation F = q(v × B), where F is the force, q is the charge of the proton, v is its velocity, and B is the magnetic field.

To know more about uniform magnetic field refer here: https://brainly.com/question/1594227#

#SPJ11

The molar concentration of OH ions in a 0.570 M solution of hypobromite ion is 1.60 × 10-8 Molar.

First, let's write the equation for the reaction of hypobromite ion, BrO- with water:Hypobromite ion is a base and reacts with water to give hydroxide ions and bromite ions. The base dissociation constant of hypobromite ion, Kb is 4.0 × 10-6Molar concentration of OH- ions in a 0.570 M solution of hypobromite ion can be calculated using the following equation:Kb = [OH-][BrO-]/[HOBr]We have the value of Kb and concentration of hypobromite ion, [BrO-]. Thus, we can calculate the concentration of OH- ions.[HOBr] is the concentration of hypobromous acid which can be calculated using the following equation:Kb = [OH-][BrO-]/[HOBr][HOBr] = [BrO-][OH-]/Kb[HOBr] = 0.570 × [OH-]/4.0 × 10-6[HOBr] = 142.5 × [OH-]Now, substituting the value of [HOBr] in the equation derived above, we get:142.5 × [OH-] = [BrO-][OH-]/Kb[OH-] = (Kb × [BrO-])/142.5[OH-] = (4.0 × 10-6 × 0.570)/142.5[OH-] = 1.60 × 10-8 Molar

So, The molar concentration of OH ions in a 0.570 M solution of hypobromite ion is 1.60 × 10-8 Molar.

Learn more about hypobromite ion here,

https://brainly.com/question/9378259

#SPJ11

The mass of 22.85 g of sodium hydroxide with 20.82 g of hydrogen chloride produces 10.29 g of water and X g of sodium chloride is 33.389 g.

To find the mass of Sodium Chloride, NaCl, we must write the reaction between sodium hydroxide and hydrogen chloride. The balanced chemical equation. NaOH + HCl → NaCl + H₂O

Using the balanced chemical equation and the Law of Conservation of Mass, we can write the equation:

Mass of NaOH = 22.85 g

Mass of HCl = 20.82 g

From the balanced equation:

Number of moles of NaCl formed = Number of moles of HCl used = 0.57041 mol

Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol

Mass of NaCl formed = Number of moles of NaCl formed × Molar mass of NaCl

= 0.57041 mol × 58.5 g/mol

= 33.389 g

Therefore, the mass of sodium chloride, NaCl, formed is 33.389 g.

Learn more about sodium chloride: https://brainly.com/question/14466891

#SPJ11

The equilibrium constant expression for the reaction CH₃OH(aq) + Cl⁻(aq) -> CH₃Cl(aq) + OH⁻(aq) is [CH₃Cl][OH⁻] / [CH₃OH][Cl⁻]

The equilibrium constant for a given reaction is defined by the following formula

Equilibrium constant = [Product]ᵃ / [Reactant]ᵇ

Where

With the above information, we can obtain the  equilibrium constant expression for the reaction CH₃OH(aq) + Cl⁻(aq) -> CH₃Cl(aq) + OH⁻(aq). Details below:

Equilibrium constant expression = [Product]ᵃ / [Reactant]ᵇ

Equilibrium constant expression = [CH₃Cl][OH⁻] / [CH₃OH][Cl⁻]

Thus, we can conclude that the equilibrium constant expression for the reaction is [CH₃Cl][OH⁻] / [CH₃OH][Cl⁻]

Learn more about equilibrium constant:

https://brainly.com/question/16589765

#SPJ1

The major product formed is nitrobenzene.

When benzene reacts with tert-butyl bromide and AICI3 it produces tert-butylbenzene as a major product. The reaction occurs via an electrophilic substitution reaction. When bromine reacts with a nail in the presence of benzene, the aromatic compound will undergo electrophilic substitution. The major product formed is bromobenzene.  When iodine reacts with HNO3 in the presence of benzene, the electrophilic substitution occurs and the major product formed is nitrobenzene. The major product formed when benzene reacts with carbon monoxide, HCl, and AICI3/CUCI is benzaldehyde, produced via the Gattermann-Koch reaction. Nitric acid and sulfuric acid are nitrating agents that cause benzene to undergo electrophilic substitution. The major product formed is nitrobenzene.

Learn more about  nitrobenzene here:

https://brainly.com/question/31276962

#SPJ11

The equilibrium constant of the dissociation of potassium hydrogen tartrate (KHT) is equal to the square of the bitartrate concentration due to the dissociation of KHT into two hydrogen ions (H+) and bitartrate ions (HC₄H₄O₆⁻) as shown below:

KHT ⇌ H+ + HC₄H₄O₆⁻

Here, the equilibrium constant expression for the dissociation reaction of KHT can be written as follows:

Kc = [H+] [HC₄H₄O₆⁻]/ [KHT]

As we know, KHT dissociates into two moles of bitartrate ion (HC₄H₄O₆⁻) and one mole of hydrogen ion (H+). So, after the dissociation of KHT, the concentration of the bitartrate ion (HC₄H₄O₆⁻) will be double that of the hydrogen ion (H+).

Therefore, the concentration of hydrogen ion (H+) will be equal to the square root of the concentration of bitartrate ion (HC₄H₄O₆⁻).

Hence, Kc = [H+]²[HC₄H₄O₆⁻]/ [KHT] = [HC₄H₄O₆⁻]²/ [KHT]

This is the reason why the equilibrium constant of the dissociation of KHT is equal to the square of the bitartrate concentration.

You can learn more about equilibrium constants at: brainly.com/question/28559466

#SPJ11

Buffer is a solution that has the ability to resist changes in pH on the addition of small amounts of either acid or base. Buffers are either acidic or alkaline, and they are often composed of a weak acid and its corresponding salt or a weak base and its corresponding salt.

An example of a buffer can be more than one. Given options are as follows:a) A weak acid and its conjugate acid is not an example of a buffer.b) A weak acid and its conjugate base is an example of a buffer. The buffer is created by combining a weak acid and its salt with a weak base. As a result, it resists a change in pH.c) A weak base and its conjugate base is not an example of a buffer.d) A weak base and its conjugate acid is an example of a buffer. The buffer is created by combining a weak base and its salt with a weak acid. As a result, it resists a change in pH. Therefore, option (b) and (d) are both examples of a buffer.

To know more about components visit:

https://brainly.com/question/15713599

#SPJ11

The ideal gas law formula is used to determine the missing values in questions. When dealing with problems that require solving for missing values using the ideal gas law formula, always ensure that all values are expressed in the correct units and temperature is converted to kelvin.

The ideal gas law formula is represented as PV = nRT, where P represents pressure, V represents volume, n represents the number of moles of gas, T represents the temperature in kelvin, and R represents the universal gas constant. Solve for missing values using the ideal gas law formula:1. 10°C, 5. 5 L, 2 mol, __ atm.The temperature must be converted to kelvin first: T(K) = T(°C) + 273.15K = 10°C + 273.15 = 283.15KPV = nRT

Rearrange the equation to isolate P: P = nRT / V

Substitute the given values:

P = (2 mol)(0.0821 L•atm/mol•K)(283.15K) / 5.5 L

: P = 8.28 atm

2. __ °C, 8. 3 L, 5 mol, 1. 8 atm.The equation PV = nRT can be rearranged to T = PV / nRThe temperature must be converted to kelvin first: T(K) = T(°C) + 273.15T = PV / nR

Substitute the given values: T = (1.8 atm)(8.3 L) / (5 mol)(0.0821 L•atm/mol•K)T(K) = T +

: T = 332 K or 59°C

The temperature must be converted to kelvin first:

T(K) = T(°C) + 273.15K

= 12°C + 273.15

= 285.15

KPV = nRT

Solve for n by rearranging the equation: n = PV / RT

Substitute the given values: n = (1.2 atm)(3.4 L) / (0.0821 L•atm/mol•K)(285.15K): n = 0.141 mol

The ideal gas law formula is used to determine the missing values in questions. When dealing with problems that require solving for missing values using the ideal gas law formula, always ensure that all values are expressed in the correct units and temperature is converted to kelvin.

To know more about ideal gas law visit:

brainly.com/question/30458409

#SPJ11

The concentration of salt in the tank remains constant at 45 kg/m³.

To determine the concentration of salt in the tank, we need to consider the amount of salt and the volume of water in the tank.

Given:

To calculate the concentration, we divide the mass of salt by the volume of water:

Concentration = Mass of salt / Volume of water

Concentration = 90 kg / 2000 liters

However, we need to convert the volume from liters to cubic meters for consistency. Since 1 liter is equal to 0.001 cubic meters, we have:

Concentration = 90 kg / (2000 liters * 0.001 m³/liter)

Concentration = 90 kg / 2 m³

Concentration = 45 kg/m³

Therefore, the concentration of salt in the tank remains constant at 45 kg/m³, regardless of the flow rates of pure water entering and the solution draining from the tank.

To learn more about Concentration, Visit:

https://brainly.com/question/17206790

#SPJ11

Carbon 14 dating is a widely used radiometric dating method for determining the age of archaeological and paleontological specimens up to 50,000 years old.

Here are the assumptions that are made when carbon 14 dating is used:

1. The rate of carbon-14 production in the upper atmosphere is constant over time.

2. The ratio of carbon-14 to carbon-12 in the atmosphere has been constant over time.

3. Carbon-14 is readily absorbed by living organisms and is incorporated into their tissues in proportion to its concentration in the atmosphere.

4. Once an organism dies, the carbon-14 in its tissues decays at a constant rate.

5. The rate of carbon-14 decay has been constant over time.

6. The amount of carbon-14 remaining in a sample can be accurately measured.

7. The sample has not been contaminated with carbon from a different source.

You can learn more about radiometric dating at: brainly.com/question/32218528

#SPJ11

The order of decreasing hydroxide ion concentration is the following: (CH3)3NHI > N2H4 > HI > KI.

What are acids and bases?

Acids and bases are chemical compounds that may be found in a wide range of everyday items, including food, cleaning agents, and medicine. Acids have a sour taste and react with metals to form hydrogen gas and salt.Bases have a bitter taste, feel slippery, and do not react with metals. Bases are generally able to dissolve acids. They are chemical compounds that release hydroxide ions when they dissolve in water.

A solution's pH is determined by its acidity or basicity, which is determined by the concentration of hydrogen ions (H+) and hydroxide ions (OH-) present. A substance with a low pH is acidic, whereas one with a high pH is basic or alkaline.

KI, HI, N2H4, and (CH3)3NHI have the same molar concentration and are all solutions. The hydroxide-ion concentration must be ranked from lowest to highest. The greater the hydroxide ion concentration, the more basic the solution. As a result, the lower the hydroxide ion concentration, the more acidic the solution.

The order of decreasing hydroxide ion concentration is the following: (CH3)3NHI > N2H4 > HI > KI.

Learn more about hydroxide ion concentration here:

https://brainly.com/question/28173930

#SPJ11

The percent ionization in a 0.300 m solution of formic acid is 0.00403%.

Given data: Formic acid (HCOOH), Ka = 1.78 × 10⁻⁴

Molarity of the solution (M) = 0.300 m

Moles of HCOOH, initial = M × volume = 0.300 × 1000 = 300 mol/L

Let x be the moles of HCOOH ionized . Let's write down the ionization reaction:

HCOOH + H₂O ↔ H₃O⁺ + HCOO⁻

Initial (mol/L): 300 0 0 0

Change (mol/L):

-x +x +x +x

Equilibrium (mol/L): 300 - x x x x

We know that

Ka = [H₃O⁺][HCOO⁻]/[HCOOH]

Let's write down the equation for Ka using the initial and equilibrium concentrations of the species.

Ka = x²/(300-x)

Ka = 1.78 × 10⁻⁴

Solve for x.

x = √[Ka × (300 - x)]

x = √[(1.78 × 10⁻⁴) × (300 - x)]

x = 0.0121 (approx)

The percent ionization can be calculated as follows:

Percent ionization = (moles ionized/initial moles) × 100= x/300 × 100= 0.0121/300 × 100= 0.00403% (approx)

Hence, the percent ionization in a 0.300 m solution of formic acid is 0.00403%.

To know more about percent ionization visit:

https://brainly.com/question/1619653

#SPJ11

Answer:

The given reaction represents a voltaic cell with a standard cell potential (E°cell) of 1.1032 V. The cell consists of zinc (Zn) as the anode and copper (Cu) as the cathode. The cell notation is Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s).

Explanation:

A voltaic cell is a device that generates electrical energy using chemical reactions. It consists of two electrodes, an anode and a cathode, separated by an electrolyte. A standard cell potential is the difference in potential between the anode and the cathode of the cell under standard conditions.

The reaction corresponding to a voltaic cell can be written as:Zn(s) + Cu2+(aq) ⟶ Cu(s) + Zn2+(aq)The standard cell potential of this reaction is given as E°cell = 1.1032 V.The cell potential can also be calculated using the Nernst equation:Ecell = E°cell - (RT/nF)ln(Q)where Ecell is the cell potential, E°cell is the standard cell potential, R is the gas constant, T is the temperature, n is the number of electrons transferred in the reaction, F is Faraday's constant, and Q is the reaction quotient.For the reaction Zn(s) + CuX2+(aq) ⟶ Cu(s) + ZnX2+(aq), the cell potential can be calculated as:Ecell = E°cell - (RT/nF)ln(Q)The reaction quotient Q for this reaction can be written as:Q = [Cu+][ZnX2+]/[Zn2+][CuX2+]where [Cu+] and [Zn2+] are the concentrations of Cu2+ and Zn2+ ions in the solution, and [CuX2+] and [ZnX2+] are the concentrations of CuX2+ and ZnX2+ ions in the solution.Substituting the values given:Ecell = 1.1032 V - (8.314 J/K mol)(298 K)/ (2)(96485 C/mol) ln([Cu+][ZnX2+]/[Zn2+][CuX2+])Ecell = 1.1032 V - 0.0256 ln([Cu+][ZnX2+]/[Zn2+][CuX2+])The value of Ecell can be calculated using the above equation.

To know more about metal ion visit:

https://brainly.com/question/17168003

#SPJ11

A buffer is most resistant to pH change when [acid] = [conjugate base] is TRUE

Define buffer solution

A buffer is a substance that can withstand a pH change when acidic or basic substances are added. Small additions of acid or base can be neutralised by it, keeping the pH of the solution largely constant. This is crucial for procedures and/or reactions that call for particular and stable pH ranges.

The concentration of acid and conjugate base in the system directly affects how well a buffer functions. Thus, a poor buffer will be one with a very low absolute concentration of acid and conjugate base.

The pH change resistance of a buffer is greatest when the concentration of weak acid is equal to that of conjugate base. A buffer is more efficient when the weak base to conjugate acid ratio is higher.

To learn more about buffer  :

https://brainly.com/question/8676275

#SPJ4

The diatomic molecule that is ionic in its pure state is option B: HF (Hydrogen Fluoride).

HF is an example of a diatomic molecule with polar covalent bonding. While it consists of covalent bonds between the hydrogen (H) and fluorine (F) atoms, the electronegativity difference between the two atoms creates a polar bond. The fluorine atom is more electronegative than hydrogen, resulting in a partial negative charge on the fluorine atom and a partial positive charge on the hydrogen atom.

Due to this polarity, HF molecules can exhibit ionic character when dissolved in water or other polar solvents, as the hydrogen atom can dissociate from the fluorine atom and form hydronium ions (H₃O⁺). However, in its pure state, HF is considered a molecular compound with polar covalent bonds rather than a fully ionic compound. Therefore, the diatomic molecule that is ionic in its pure state is option B: HF (Hydrogen Fluoride).

Learn more about diatomic molecule from the link given below.

https://brainly.com/question/1433575

#SPJ4

The balanced equation for the precipitation reaction between sodium chloride (NaCl) and silver nitrate (AgNO3) can be written as:

NaCl + AgNO3 → AgCl + NaNO3

In this reaction, sodium chloride reacts with silver nitrate to produce silver chloride and sodium nitrate. The precipitate formed in this reaction is silver chloride (AgCl).

When sodium chloride and silver nitrate are mixed together, the silver cations (Ag+) from silver nitrate combine with the chloride anions (Cl-) from sodium chloride to form solid silver chloride (AgCl). This solid precipitates out of the solution as a white, insoluble solid.

The sodium cations (Na+) from sodium chloride combine with the nitrate anions (NO3-) from silver nitrate to form sodium nitrate (NaNO3), which remains in solution as it is a soluble compound.

The formation of the white precipitate, silver chloride, indicates that a precipitation reaction has occurred. Precipitation reactions involve the formation of an insoluble solid from the combination of two soluble compounds. In this case, the combination of silver cations and chloride anions results in the formation of the insoluble silver chloride precipitate.

Learn more about balanced equation here : brainly.com/question/7181548

#SPJ11

The specific heat of benzene is 1.74 J/(g·K) which is required to raise the temperature of 145 g of benzene from 25.0°C to 70.0°C

Specific heat is also referred to as specific heat capacity or simply heat capacity. The formula for calculating specific heat is as follows:

Q = m × c × ΔT

So, for this question, we can solve for the specific heat of benzene using the formula above.

We first need to convert 11.2 kJ to joules: 11.2 kJ × 1000 J/kJ = 11,200 J

Use the formula above to solve for specific heat:

c = Q / (m × ΔT)

c = 11,200 J / (145 g × 45.0°C)

c = 1.74 J/(g·K)

Therefore, the specific heat of benzene is 1.74 J/(g·K).

Learn more about specific heat here:

https://brainly.com/question/28165708

#SPJ11

The percent strength of the reconstituted sterile injection of cefazolin that contains 4 g of cefazolin in 8 mL of solution is 50% (Option B).

First, you need to find the amount of drug in 100 mL of the solution, then you can calculate the percentage strength of the solution as follows:

Given: Amount of cefazolin in the solution = 4 g

Volume of solution = 8 mL

Percent strength of the solution in percentage

We can find the percent strength of the solution as follows: We know,100 mL of solution will contain 5 times the given volume (8 mL). Hence, we need to find the amount of drug present in 100 mL of solution.= (4 g / 8 mL) x 100 mL= 50 g/mL

We know the definition of percent strength as follows:

Percent strength of a solution = (amount of drug in the solution/volume of solution) x 100= (50 g/mL) x 100%= 50%

Therefore, the percent (%) strength of the solution is 50%. Hence, option B is correct.

You can learn more about cefazolin at: brainly.com/question/29475728

#SPJ11

In the example of distilling miscible liquids, two compounds commonly used are ethanol and water.

One of the common example for distilling miscible liquids are ethanol and water. These two substances can mix in any ratio since they are miscible. Because ethanol and water have different molecular structures, when heated, the boiling temperatures of the two liquids vary.

Compared to water, ethanol has a lower boiling point. The ethanol vaporizes first when the combination is heated, leaving the water behind. After collecting and condensing the vapor, pure ethanol is produced. Distillation is a common practice in many different industries, including the creation of alcoholic beverages and ethanol for fuel.

To know more about miscible liquids here https://brainly.com/question/30689378

#SPJ4

The correct order of increasing density at STP among the given gases is; NH₃ < N₂ < Kr < N₂O₄. Option D is correct.

To determine the order of increasing density at STP among the given gases, we need to consider their molar masses and the behavior of gases under standard conditions.

The molar masses of gases are as follows;

N₂O₄; 92.01 g/mol

N₂; 28.01 g/mol

Kr; 83.80 g/mol

NH₃; 17.03 g/mol

At STP (Standard Temperature and Pressure), gases behave ideally, meaning they have similar volumes and occupy the same amount of space. The density of a gas will be directly proportional to its molar mass. Therefore, the gas with the lowest molar mass will have the lowest density.

Comparing the molar masses of the given gases, we can determine the order of increasing density;

NH₃ < N₂ < Kr < N₂O₄

Hence, D. is the correct option.

To know more about Standard Temperature and Pressure here

https://brainly.com/question/29129606

#SPJ4

A notebook should not be placed on top of a hot plate next to a full beaker of toluene as it goes against the sop of toluene.

When working with hazardous chemicals like toluene, it is important to abide by the guidelines outlined in the SOP.

Placing a notebook on a hot plate next to a beaker of toluene introduces additional safety risks unrelated to handling the toluene itself.

An object like a notebook is a flammable substance that poses a fire hazard when placed near a hot plate. Having a full beaker of toluene next to it further increases the risk of fire and other accidents like chemical exposure.

Therefore, it is important to adhere to the rules given in the SOP to maintain a safe working environment by keeping flammable materials away from heat sources.

But if the situation is already out of control, it is best to contact the supervisors, safety officer, or other knowledgeable personnel who can provide specific guidance and handle the situation.

Read more about Lab SOP and safety measures on :

https://brainly.com/question/30564201

The correct question is:

How does placing a flammable object next to toluene differ from the SOP given for handling toluene?

The maximum number of electrons in this sublevel is 3 ×2 = 6, where n = 2, l = 1. The maximum number of electrons in this sublevel is 5 × 2 = 10 for 3d. The maximum number of electrons in this sublevel is 1 × 2 = 2 for 4s.

A.

n = 2, l = 1 , n = 2 (second energy level) and l = 1 (p sublevel).

In the p sublevel, there are three orbitals: px, py, and pz.

Each orbital can hold a maximum of 2 electrons (one with spin-up and one with spin-down).

Therefore, the maximum number of electrons in this sublevel is 3 × 2 = 6.

B.

For this quantum number 3d, 

n = 3 (third energy level) and l = 2 (d sublevel).

In the d sublevel, there are five orbitals: dxy, dxz, dyz, dx2-y2, and dz2.

Each orbital can hold a maximum of 2 electrons.

Therefore, the maximum number of electrons in this sublevel is 5 × 2 = 10.

C.

For this quantum number 4s, 

n = 4 (fourth energy level) and l = 0 (s sublevel).

In the s sublevel, there is one orbital: 4s.

The 4s orbital can hold a maximum of 2 electrons.

Therefore, the maximum number of electrons in this sublevel is 1 ×2 = 2.

Learn more about quantum number here.

https://brainly.com/question/31259563

#SPJ1

Out of the given options, the substance that is removed when tea is brewed in hot water is tannins.

Tannins are bitter-tasting compounds that are typically found in the leaves, bark, fruit, and roots of various plants. They are frequently used in food and beverages, such as tea and wine, to provide flavor and color.In the case of tea, tannins are responsible for giving it a slightly bitter flavor and an astringent feeling in the mouth.

When hot water is added to tea leaves, tannins are extracted from them and are dissolved into the water. Therefore, tannins are removed when tea is brewed in hot water.To summarize, the substance that is removed when tea is brewed in hot water is tannins.

Learn more about tannins at:

https://brainly.com/question/30969217

#SPJ11

Approximately 8.786 grams of potassium alum should be produced. we need to consider the stoichiometry of the reaction and the molar masses of the compounds involved.

The balanced equation for the reaction is:

2Al + 2KOH + H₂SO₄ → KAl(SO₄)₂·12H₂O + 3H₂

From the equation, we can see that 2 moles of aluminum react to produce 1 mole of potassium alum. Therefore, we need to calculate the number of moles of aluminum.

Molar mass of Al = 26.98 g/mol

Number of moles of Al = Mass of Al / Molar mass of Al = 1.000 g / 26.98 g/mol = 0.03706 mol

According to the stoichiometry, 2 moles of aluminum will produce 1 mole of potassium alum. Therefore, the number of moles of potassium alum produced is half the number of moles of aluminum:

Number of moles of KAl(SO₄)₂·12H₂O = 0.03706 mol / 2 = 0.01853 mol

Finally, we can calculate the mass of potassium alum using the molar mass of KAl(SO₄)₂·12H₂O:

Molar mass of KAl(SO₄)₂·12H₂O = 474.38 g/mol

Mass of KAl(SO₄)₂·12H₂O = Number of moles of KAl(SO₄)₂·12H₂O × Molar mass of KAl(SO₄)₂·12H₂O = 0.01853 mol × 474.38 g/mol = 8.786 g

For more such questions on stoichiometry

https://brainly.com/question/14935523

#SPJ8

The order of the substituents according to CIP sequence rules is as follows: 1. -Br 2. -CH2CH2Br 3. -C equivalence N 4. -CH2Br

The Cahn-Ingold-Prelog (CIP) sequence rules describe how to assign the absolute configuration of a chiral center to an enantiomer. The ranking of substituents can be done with the help of CIP sequence rules. The sequence rules are as follows:At first, the priority of substituents is determined by atomic number. The higher the atomic number, the higher the priority. If a molecule has isotopes, the one with a higher atomic mass takes priority.Next, if the atoms in two substituents have the same atomic number, the atoms in each substituent are compared, going atom by atom down the chains of atoms until a difference is found. When a difference is found, the substituent with the atom of higher atomic number is given the higher priority.The steps for ranking the given set of substituents are as follows:As we can see in the given set of substituents, the most common atoms are carbon and bromine. The carbon has an atomic number of 6, and bromine has an atomic number of 35.5. Hence, Bromine has a higher atomic number than Carbon. Therefore, bromine gets the highest priority among the given substituents.Now, we have to compare the other substituents to the highest priority substituent (Bromine).If we compare -CH2Br with -CH2CH2Br, both substituents have the same atoms up to the second carbon. After that, -CH2Br has a single carbon atom, whereas -CH2CH2Br has two carbon atoms. The substituent with more carbon atoms is given higher priority. Therefore, -CH2CH2Br is ranked higher than -CH2Br.In -C equivalence N, nitrogen has an atomic number of 7, which is higher than the atomic number of carbon in -CH2Br and -CH2CH2Br. Therefore, -C equivalence N is ranked third.Lastly, -Br is ranked the lowest among the substituents.The order of the substituents according to CIP sequence rules is as follows: 1. -Br 2. -CH2CH2Br 3. -C equivalence N 4. -CH2Br.

Learn more about  CIP sequence here:

https://brainly.com/question/31976935

#SPJ11

The replacement of a hydrogen atom in CH[tex]_{4}[/tex] by a chlorine atom causes an increase in boiling point because chlorine is more electronegative than hydrogen, resulting in a stronger dipole-dipole attraction between molecules.

When a hydrogen atom in CH[tex]_{4}[/tex] is replaced by a chlorine atom, the resulting molecule becomes CH[tex]_{3}[/tex]Cl. Chlorine is more electronegative than hydrogen, meaning it has a higher affinity for electrons. This causes the chlorine atom to pull the shared electrons closer to itself, creating a partial negative charge. The hydrogen atom in CH[tex]_{4}[/tex], on the other hand, is less electronegative, resulting in a partial positive charge.

The difference in electronegativity between chlorine and hydrogen leads to a stronger dipole-dipole attraction between CH[tex]_{3}[/tex]Cl molecules compared to CH[tex]_{4}[/tex] molecules. This increased intermolecular force requires more energy to break the attractive forces and convert the substance from a liquid to a gas, resulting in a higher boiling point.

You can learn more about hydrogen atom at

https://brainly.com/question/28499820

#SPJ11

a) Malonic acid will exist primarily as an anion in aqueous solution at pH 5.4.

b) This option is not valid.

c) This option is not valid.

d) Alloxanic acid would not primarily exist as an anion at pH 5.4.

e) Propanoic acid will exist primarily as an anion in aqueous solution at pH 5.4.

f) Glyoxylic acid will exist primarily as an anion in aqueous solution at pH 5.4.

To determine which weak acid would not exist primarily as an anion in aqueous solution at pH 5.4, we need to compare the pKa values of the acids with the pH value.

The pKa value represents the negative logarithm of the acid dissociation constant (Ka), and it indicates the strength of the acid. A lower pKa value indicates a stronger acid.

Let's analyze each option:

a. Malonic acid, Ka = 1.5 x 10^-3, pKa = 2.8: The pKa of malonic acid is lower than pH 5.4, indicating that it will exist primarily as an anion in aqueous solution at pH 5.4.

b. None would be anionic: This option suggests that none of the acids would exist primarily as an anion at pH 5.4. However, this statement contradicts the given information, as weak acids do exist as anions to some extent in their dissociated form in aqueous solution. Therefore, this option is not valid.

c. All would be anionic: This option suggests that all the weak acids would exist primarily as anions at pH 5.4. While weak acids do exist as anions to some extent, it is not necessarily the case that all weak acids will be predominantly in their anionic form at a specific pH. Therefore, this option is not valid.

d. Alloxanic acid, Ka = 2.3 x 10^-7, pKa = 6.6: The pKa of alloxanic acid is higher than pH 5.4, indicating that it will exist primarily in its neutral (non-anionic) form in aqueous solution at pH 5.4. Therefore, alloxanic acid would not primarily exist as an anion at pH 5.4.

e. Propanoic acid, Ka = 1.4 x 10^-5, pKa = 4.9: The pKa of propanoic acid is lower than pH 5.4, indicating that it will exist primarily as an anion in aqueous solution at pH 5.4.

f. Glyoxylic acid, Ka = 6.6 x 10^-4, pKa = 3.2: The pKa of glyoxylic acid is lower than pH 5.4, indicating that it will exist primarily as an anion in aqueous solution at pH 5.4.

Learn more about pKa value from the link given below.

https://brainly.com/question/31835062

#SPJ4

The final pressure of the gas, when the volume is increased from 12.8 L to 25.6 L, can be calculated using Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at constant temperature.

In the first scenario, the initial pressure is 0.987 atm and the initial volume is 12.8 L. The product of pressure and volume is constant (P₁V₁ = P₂V₂), so we can calculate the final pressure (P₂) using the equation:

P₂ = (P₁ * V₁) / V₂

Plugging in the values, we have:

P₂ = (0.987 atm * 12.8 L) / 25.6 L = 0.494 atm

Therefore, the final pressure of the gas, when the volume is increased to 25.6 L, is 0.494 atm. Hence, the correct answer is option c) 0.494 atm.

To learn more about Boyle's Law click here: brainly.com/question/30367067

#SPJ11

The value of ΔH° for the oxidation of solid elemental sulfur to gaseous sulfur trioxide is -791.4 kJ/mol. This means that the reaction is exothermic, and heat is released when it occurs. The reaction is also spontaneous, meaning that it will occur without any outside input of energy.

The oxidation of sulfur to sulfur trioxide is a two-step process. In the first step, sulfur reacts with oxygen to form sulfur dioxide. This reaction is exothermic, meaning that heat is released. In the second step, two molecules of sulfur dioxide react to form one molecule of sulfur trioxide. This reaction is also exothermic.

The overall reaction is exothermic, meaning that heat is released when it occurs. This is because the bonds in the products (sulfur trioxide) are stronger than the bonds in the reactants (sulfur and oxygen). The release of heat lowers the overall energy of the system, making the reaction spontaneous.

The value of ΔH° for the reaction is -791.4 kJ/mol. This means that for every mole of sulfur that is oxidized, 791.4 kJ of heat is released.

To learn more about sulfur trioxide click here: brainly.com/question/30765672

#SPJ11