What measuring instrument should be used to determine if there was presence of electricity running in her extension cord?

The total kinetic energy of the system after the collision will be 4.5 ×10^2 Joules

Option (B) is the correct choice.

An elastic collision is one in which the system does not experience a net loss of kinetic energy as a result of the collision.

In elastic collisions, momentum and kinetic energy are both preserved.

Imagine two trolleys that resemble one another moving in the same direction at the same pace. They clash, maintaining their speed as they bounce off one another. The fact that no energy has been wasted makes this collision fully elastic.

Therefore, to calculate the kinetic energy of the system after the collision

We will use the formula 1/2 mv²

Mass = 25 kg

Velocity = 5.98 m/s

So, the value of KE = 1/2 × 25 × 5.98 ² = 447 Joules = 4.5 ×10^2 Joules (Approximately)

For more questions on Collision:

https://brainly.com/question/1808045

#SPJ4

2 bonds mean Double bond or the order of bond =2.

A double bond as the name suggests double, is usually formed when two atoms share two sets of electrons with each other.

As electrons are usually shared in pairs.

A covalent bond is a shared pair of electrons. A double bond between two atoms requires more energy to break than a single bond because four electrons are shared by the two atoms in the double bond.

Two electron pairs make up a double bond (bond order = 2), whereas three electron pairs are shared by a triple bond (bond order = 3). Bond order can be a fractional number.

For more questions on Double bond:

https://brainly.com/question/22559483

#SPJ4

The resultant force that is acting on the diver is 80N.

We know that the idea of the resultant force is that it is the kind of force that is the result of the action more than one force acting on an object. As such, the resultant force is the effective force that acts on an object that under the action of a given system of forces.

Now we can see that there is an upward and a downward force that is acting on the diver as we can see and the forces are in opposite direction thus the resultant of the forces can be obtained by subtraction. The resultant force is obtained as; 680 N - 600 N= 80N

Learn more about resultant force:https://brainly.com/question/16380983

#SPJ1

During the entire throw, the ball accelerates at the same rate (9.8 m/s2 toward the earth). The ball is moving upward and stays in that direction.

While it is in the air, does its acceleration rise, fall, or remain constant?

Throughout the entire time the penny is in the air, the acceleration is constant. (If there is no wind and air resistance is disregarded, the acceleration is caused by gravity, which is always constant.)

What happens to the ball's speed now—does it rise or fall?

During its downward trajectory, the ball's speed will progressively grow. Experts' step-by-step guidance will help you eliminate doubt and get good exam results.

For more information about Gravity

Visit:

https://brainly.com/question/14874038

#SPJ4

Wavelength is basically the distance between two successive crests or troughs in a wave.

What are Crests?

Crests are points on a wave where the amplitude is at a maximum. In physics, they are used to describe the shape of a wave, and the amplitude of the wave is measured from the crest to the trough.

Wavelength is typically measured in meters (m) or nanometers (nm). Wavelength is an important parameter in wave mechanics and is related to the frequency of the wave and its speed. Wavelength is inversely proportional to frequency, meaning that as frequency increases, wavelength decreases.

To know more about wavelength,

https://brainly.com/question/10750459

#SPJ4

To develop this problem it is necessary to apply the concepts related to the conservation of Energy. In this case the definition concerning kinetic energy from the simple harmonic movement.

Where,

KE = PE8 + Wf

KE = 1/2KA² + Wf

KE = Kinetic Energy

PE8 = Potential Harmonic Simple Energy

Wf =  Work made by friction.

Our values are given as,

m = 10Kg ⇒ mass

k = 1400N/m ⇒ Spring constant

A = 0.1m ⇒Amplitude

f = 30N Frictional Force

Replacing we have,

KE = 1/2 ka² +Wf

KE = 1/2(1400)×(0.8)²+(-30×0.8)

KE = 4245

Therefore the Kinetic Energy of the block as it passes through its equlibrium position is 4245J.

To learn more about horizontal force please click on below link

https://brainly.com/question/2037071

#SPJ4

The cord has a one percent tension. When something or someone pulls on a cord or string, the tension that results is what is being described.

We are aware that T = mg + ma is the formula used to compute the force of tension.

T = mg + ma

T = 800 × 9.8 + 800 ×9.8

Tension is the force that is sent through a rope, string, or wire when two opposing forces pull on it. Along the whole length of the wire, the tension force pulls energy equally on the bodies at the ends. Every physical object that comes into contact with another one exerts force on it.

To know more about tension visit:-

https://brainly.com/question/11348644

#SPJ4

Mean absorbance at each wavelength is denoted by A(λ).Distance between measurements in wavelengths is dλ.

To learn more about wavelength refer

https://brainly.com/question/10728818

#SPJ4

The energy element in the definition of motivation is considered a measure of intensity, drive, and vigor.

Motivation is the process by which a person puts in energized, directed, and sustained effort to attain a defined goal. The energy element is taken as the measure of intensity or drive.

The term "motivation" describes the reason behind action. It is the driving force guiding human actions. Motivation is the process of initiating, guiding, and maintaining goal-oriented behaviors of a person or an organization.

There are three major components that drive motivation: activation, persistence, and intensity.

Energy element measures intensity or drive.

Direction is when the effort is directed toward and consistent with organizational goals.

Persistence is putting continue and sustained effort to achieve goals.

To know more about motivation here

brainly.com/question/951988

#SPJ4

The five pillars of safety are engineering, encouragement, enforcement, and evaluation. Your strategy to ensure that you promote a safe environment and workplace should heavily emphasize education.

By exercising your intellect beforehand, you may be able to save a life or at least lessen someone else's suffering. The three fundamental Cs are check, call, and care.

A Framework for Aligning the 14 Process Safety Management Elements. To prevent the release of extremely hazardous substances, it is essential to use related techniques to managing hazards, although it might be difficult to put Process Safety Management's operational goals into effect.

To know more about elements of safety visit:-

https://brainly.com/question/29793033

#SPJ4

The speaker of the poem is an unnamed person who lives in a clearly rural place and who questions the notion of keeping up a wall that keeps breaking down every year.

What is a poem?

Poetry (derived from the Greek poiesis, "to create"), also called poetry, uses the aesthetic and often rhythmic qualities of language (phonetic aesthetics, tonal symbolism, time signatures, etc.) to express "or" instead of one plain and obvious meaning. A poem is a literary work written by a poet according to this principle.

Poetry has a long and tumultuous history and has undergone different developments around the world. It goes back at least to prehistoric African hunting poetry and court poetry of praise and lamentation of the kingdoms of the Nile, Niger and the Volta Valley.

The speaker of the poem is an unnamed person who lives in a clearly rural place and who questions the notion of keeping up a wall that keeps breaking down every year.

To know more about Poem, visit:

https://brainly.com/question/9861

#SPJ4

The exact relationship between frequency and wavelength is f = c/λ.

When you change the tension on the string, you are changing the wave speed (c) and frequency, but not the wavelength. Specifically, as the frequency goes down, the speed goes down by the same factor, and so the wavelength doesn't change.

What is a wavelength?

To know more about Wavelength, click the link given below:

https://brainly.com/question/12377285

#SPJ4

The total mechanical energy of the baseball is found to be 473.5 J

The total mechanical energy of the ball will be given by the sum of the total potential energy and the total kinetic energy of the ball which will be given by the relation,

ME = KE + PE

ME = 1/2Mv²+Mgh

Where,

M is the mass of the ball V is the velocity of the ball h is the height of the baseball.

It is given to us that the baseball player has thrown the baseball towards another player when the ball is reach the height of 15m it attend us velocity of 40m/s and the mass of the ball is given to be 0.5 kg.

Now, putting all the values in order to find the mechanical energy of the ball,

ME = 1/2(0.5)(40)²+0.5(9.8)(15)

ME = 473.5 J.

The total mechanical energy of the baseball is 473.5 J.

To know more about mechanical energy, visit,

https://brainly.com/question/24443465

#SPJ4

If the mass of the bar is 50kg, and Shelbi exerts 550N of force, the acceleration of the bar is 11 N/m².

A push, pull, or hit on any object that causes a change in its state of motion is referred to as applying force. One thing experiences a force from another. For instance, we can say that when a force was applied to the box in the form of a push, it changed its state from rest to motion because when a box is pushed, it goes forward and changes its state of motion.

Accelerations are vector quantities. According to Newton's Second Law, an object's acceleration is the result of two factors working together: the object's mass, which varies depending on the materials it is made of, and the net balance of all external forces acting on it.

Acceleration= Force/Mass =550/50 = 11m/s²

To learn more about acceleration visit:

brainly.com/question/2303856

#SPJ1

Knowledge from sensory memory is transferred to short-term memory, which occasionally links it to information stored in long-term memory. storage for temporary memories.

The ability to link events, learn, and make sense of our life is precisely what memory enables. In essence, it enables us to construct Explicit associative memory requires conscious recall, whereas implicit associative memory relies on an unconscious process called priming. The cognitive process of selecting focusing on one part of the world while disregarding others, attention transfers information from sensory memory into short-term memory by filtering out all but the stimuli that are of interest at any given moment

To learn more about memory please click on below link

https://brainly.com/question/28754403

#SPJ4

Home office & remote work emissions fall under scope 3 because they are indirectly produced by your business.

Scope 3 emissions result from company operations but come from sources that the company does not own or control.Activities falling under scope 3 include things like using goods and services, transporting fuel that has been purchased, and extracting and producing materials that have been purchased.

Direct emissions form controlled or owned sources are covered by Scope 1.The generation of the purchased energy, steam, heating, and cooling used by the reporting enterprise is covered by scope 2's indirect emissions.All the other indirect emission that take place along a company's value chain are covered by scope 3.

To know more about Scope 3 emissions visit:

https://brainly.com/question/29546969

#SPJ4

The formula of photoelectric effect is E = hf = Φ + ½ mv²m

Electrons (i.e., electrically charged particles) are quickly emitted by the surface of photoelectric materials when electromagnetic radiation of a specific frequency (i.e., above Threshold Frequency) falls on it. This phenomenon is known as the photoelectric effect.

The photoelectric effect is a phenomena whereby electrons can be released from the surface of a metal when light shines on it. The electrons that are released from the metal are known as photoelectrons, and this process is also sometimes referred to as photoemission.

E = hf = Φ + ½ mv²max

h = Planck's constant (J s)

f = the frequency of the incident radiation (Hz)

Φ = the work function of the material (J)

½ mv2max = Ek(max) = the maximum kinetic energy of the photoelectrons (J)

To learn more about photoelectric effect from given link

https://brainly.com/question/1359033

#SPJ4

Answer:

Approximately [tex]7.41 \times 10^{3}\; {\rm m}[/tex].

Explanation:

If initial velocity, final velocity, and time taken are all found, then the change in height (displacement) can be found as:

[tex]\begin{aligned}(\text{displacement}) &= \frac{(\text{average velocity})}{(\text{time taken})} \\ &= \frac{(1/2)[(\text{initial velocity}) + (\text{final velocity})]}{(\text{time taken})}\end{aligned}[/tex].

For example, during the [tex]t = 6.00\; {\rm s}[/tex] of constant acceleration at [tex]a = 58.8\; {\rm m\cdot s^{-2}}[/tex], initial velocity was [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] and final velocity would be:

[tex]\begin{aligned}v &= (\text{initial velocity}) + (\text{acceleration}) \, (\text{time}) \\ &= (0\; {\rm m\cdot s^{-1}}) + (58.8\; {\rm m\cdot s^{-2}})\, (6.00\; {\rm s}) \\ &= 352.8\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Displacement during this period of time would be:

[tex]\begin{aligned}(\text{displacement}) &= \frac{(\text{average velocity})}{(\text{time taken})} \\ &= \frac{(1/2)[(\text{initial velocity}) + (\text{final velocity})]}{(\text{time taken})} \\ &= \frac{(1/2)\, (0\; {\rm m\cdot s^{-1}} + 352.8\; {\rm m\cdot s^{-1}})}{(6.00\; {\rm m\cdot s^{-1}})} \\ &\approx 1.058\times 10^{3}\; {\rm m}\end{aligned}[/tex].

During the next part of the flight, initial velocity was [tex]352.8\; {\rm m\cdot s^{-1}}[/tex] (from the first part of flight) and final velocity would be [tex]0\; {\rm m\cdot s^{-1}}[/tex] when the rocket reaches maximum height. Acceleration was given to be [tex]a = (-9.80\; {\rm m\cdot s^{-2}})[/tex](negative since the rocket is accelerating downward,) but time is not known. Apply the following equation to find the change in height (displacement):

[tex]\begin{aligned}(\text{displacement}) &= \frac{[(\text{final velocity})^{2} - (\text{initial velocity})^{2}]}{2\, (\text{acceleration})} \\ &\approx \frac{(0\; {\rm m\cdot s^{-1}})^{2} - (352.8\; {\rm m\cdot s^{-1}})^{2}}{2\, (-9.80\; {\rm m\cdot s^{-2}})} \\ &\approx 6.350\times 10^{3}\; {\rm m}\end{aligned}[/tex].

The total change in height would be approximately [tex](1.058\times 10^{3}\; {\rm m}) + (6.350\times 10^{3}\; {\rm m}) \approx 7.41\times 10^{3}\; {\rm m}[/tex].

Explanation of the Current Job Market: Numerous studies have demonstrated considerable favourable Additional: Organizational commitment is strongly positively correlated with job satisfaction.

People who are more satisfied with their jobs The value of the collection of employee actions that either positively or negatively influence the achievement of company goals is referred to as With the exception of an employee's age and length of service, all of the following have been proven to be positively connected with organisational commitment. Examples of employment enrichment include diversifying skill sets, giving roles more responsibilities, giving work a deeper purpose, fostering autonomy, and providing feedback. Adding more of the same obligations associated to the same position satisfaction won't achieve the purpose of exposing the person to tasks typically allocated for higher positions or those with more specialised duties

To learn more about satisfaction please click on below link

https://brainly.com/question/7873593

#SPJ4

The force with which the track pushes on the shell at point A is F = 2/3 m g.

In part (c), 1/2 m v² = m g h₀ - 2 m g R

v² = 2 g h₀ - 4 g R

v² = 2 g (17 R/6 ) - 4 g R

v² = 5/3 × g R ≥ g R ----(1)

Let us calculate F.

Substituting (1) in F,

F = mv²/R - mg = m/R (5/3 g R) - m g = 5/3 × m g - m g = 2/3 m g

Thus, the force with which the track pushes on the shell at point A is F = 2/3 m g.

The question is incomplete. The complete question is 'A thin-walled hollow spherical shell of mass m, radius r, moment of inertia I = (2/3) MR² starts from rest and rolls without slipping down. Points A and B are on a circular part of the track having a radius R. The diameter of the shell is very small compared to h₀ and R.

(c) Suppose the track now became without friction, so the shell just slid without rolling but started at height h₀. Would it still complete the loop-the-loop. Why?

(d) In part (c), how hard does the track push on the shell at point A.'

To know more about shells:

https://brainly.com/question/28151661

#SPJ4

The person generated approximately 16.7 W of power while lifting the bag of groceries. To the nearest tenth of a watt, this would be 16.7 W.

To calculate the power generated by the person lifting the bag of groceries, you can use the equation:

Power = Work / Time

where Power is the power generated, Work is the work done, and Time is the time over which the work was done.

In this case, the work done is equal to the force applied (57 N) multiplied by the distance over which the force was applied (1.75 m), or 57 N * 1.75 m = 100.25 J. The time over which the work was done is 6.0 seconds.

Plugging these values into the equation above, we get:

Power = 100.25 J / 6.0 s

This simplifies to:

Power = 16.7 W

To know more about energy

https://brainly.com/question/1932868

#SPJ4

To find the magnitude of a force vector that is 3 cm by 5 cm, you would use the formula:

magnitude = [tex]sqrt(3^2 + 5^2) = sqrt(9 + 25) = sqrt(34) = 5.8[/tex]

1 cm = 21 N, you would multiply the magnitude by 21:

[tex]intensity = magnitude * 21 = 5.8 * 21 = 121.8 n[/tex]

A force vector is a physical quantity that represents a force acting on an object. It has both magnitude and direction, and it is represented graphically by an arrow with a length proportional to its magnitude and an orientation that shows its direction.

For example, if you push a book across a table, the force you apply to the book is a force vector. It has a certain magnitude (e.g. 10 newtons), and it is directed from your hand towards the book.

Force vectors are important in physics because they allow us to analyze the forces acting on an object and predict how the object will move in response to those forces. In order to do this, we can use vector addition, which allows us to add multiple force vectors together to find the net force acting on an object.

Learn more about vectors, here:

https://brainly.com/question/29740341

#SPJ1

Due to the fact that the reporting company purchases waste management services, treatment of waste produced during operations is designated as an originating scope 3 category.

Scope 3 emission are the outcome of operations on resources that the reporting company does not own or control, but which are indirectly impacted by the organization through its value chain.All sources outside of an organization's range 1 and scope 2 boundary are included in scope 3 emissions.

Scope 3 emissions were indirect emission of greenhouse gases that are produced in the larger economy in addition to scope 2 emissions.They result from a facility's operations but come from sources not under the ownership or control of that facility.

To know more about Scope 3 visit:

https://brainly.com/question/29546969

#SPJ4

Alternate Approach The inductor exhibits open circuit behavior at time t=0+. At t=0+, inductive reactance is infinite, causing the inductor to initially operate as an open circuit. The inductor similarly acts like a short circuit at steady state.

The inductor behaves as an open circuit with current reflected back at time t = 0 +. Important Information: A capacitor with a zero starting condition behaves as a short circuit at time t = 0 +, reflecting back voltage.

At time t = 0, an inductor is coupled to a charged capacitor. Considering the capacitor and the inductor as one, Write out the equation for the effective potential difference across the combination at any instant in time t, and then solve it to find the instantaneous current through the combination.

To know more about electric field visit:-

https://brainly.com/question/15800304

#SPJ4

Answer:

The differential equation gives the angular velocity as sqrt(k/m) where m = mass of the object = 125/9.8 = 12.755.     Where k = spring constant, pi = 3.14

We are told that the period is 3.56 seconds. But angular velocity = (2*pi)/P     where p (period) = 3.56 seconds.

Equating the two angular velocity expressions gives (2*pi)/3.56 = sqrt(k/12.755)

Solving for k, we get k = 39.73.

Explanation:

The volume of the liquid is 20.26ml.

Volume is a measurement of three-dimensional space that is occupied. Numerous imperial or US customary units, as well as SI-derived units (such the cubic metre and liter), are frequently used to quantify it numerically (such as the gallon, quart, cubic inch).

We are given that,

Mass = m = 19.6g

Density = d = 0.967 g/ml

To calculate the volume of the liquid can be given as,

density = mass/volume

V = m/d

V = (19.6g)/(0.967g/ml)

V = 20.26ml

Therefore , the volume of the liquid is 20.26ml.

To know more about volume

https://brainly.com/question/10794343

#SPJ4

The format specifier %f is used to output values of type float or double.

Format specifiers are used in C to accept inputs and print out the output of a type. The sign% is present in every format specifier we use. The type of data that must be submitted as input and the type of data that must be displayed on the screen are both specified by format specifiers to the compiler.

Both the input and the output use the format specifier. When a variable is taking input with scanf() or printing data with printf, there is a technique to let the compiler know what type of data is there in the variable (). Examples are %c, %d, and %f.

Format specifiers in C typically come in six different flavors.

To know more about format specifier

https://brainly.com/question/4252154

#SPJ4

The magnification produced by the lens of a 0.5 mm gem is 10mm.

The magnification of a lens is calculated in terms of the ratio of image height to object height. It is also expressed as a ration of image distance and object distance.

Magnification of lens = image height / object height  = image distance / object distance.

M = [tex]h^{'[/tex]/ h = v/u

Magnification of concave lens is negative and of convex lens is positive.

In the given question,

M = 20

h = 0.5 mm

We have to find size of image, [tex]h^{'[/tex] = ?

using magnification formula

m = h'/h

20 = h'/0.5

h' = 20× 0.5 =10 mm

To know more about magnification here

brainly.com/question/21370207

#SPJ4