Based on the experimental outcome, the possible pH range of the unknown substance cannot be determined without specific information about the experimental conditions and results.
The pH range of a substance depends on its acidic or alkaline properties. Without knowing the experimental conditions or the specific results, it is not possible to determine the pH range of the unknown substance. pH is a measure of the concentration of hydrogen ions in a solution, and it can range from 0 (very acidic) to 14 (very alkaline), with 7 being neutral. Factors such as the presence of acids, bases, or buffers, as well as the concentration and strength of these substances, can greatly affect the pH range. Therefore, without more information, it is not possible to provide a specific pH range for the unknown substance based solely on the experimental outcome.
Learn more about PH range here ; brainly.com/question/30001446
#SPJ11
If the number of bacteria in a colony doubles every 18 minutes and there is currently a population of 200,000 bacteria, what will the population be 36 minutes from now?
Answer:
After 36 minutes, there will be a population of 800,000 bacteria.
Explanation:
After the first 18 minutes, it will double to 400,000. Then, at 36 minutes, it will have doubled again, giving you 800,000.
molecular iodine, i2(g), dissociates into iodine atoms at 625 kwith a first-order rate constant of 0.271 s-1. (a) what is thehalf-life for this reaction? (b) if you start with 0.050 m i2 atthis temperature, how much will remain after 5.12 s assumingthat the iodine atoms do not recombine to form i2?
The half-life for this reaction is approximately 2.56 seconds.
Approximately 0.014 M of I₂ will remain after 5.12 s, assuming no recombination of iodine atoms to form I₂.
(a) The half-life of a first-order reaction can be calculated using the equation:
t₁/₂ = (0.693) / k
Given that the rate constant (k) is 0.271 s⁻¹, we can substitute this value into the equation:
t₁/₂ = (0.693) / 0.271 = 2.56 s
(b) To determine the remaining amount of I₂ after 5.12 s, we can use the first-order integrated rate equation:
[tex][A] = [A_{0} ]* e^{(-kt)}[/tex]
Where [A] is the concentration at time t, [A₀] is the initial concentration, k is the rate constant, and e is the base of natural logarithm.
Given [A₀] = 0.050 M, k = 0.271 s⁻¹, and t = 5.12 s, we can calculate:
[A] = 0.050 * e^(-0.271 * 5.12)
[A] = 0.050 * e^(-1.387)
[A] = 0.014 M
To know more about the Molecular iodine, here
https://brainly.com/question/12270820
#SPJ4
HELP MEEEEEEE PLSSS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 As distance increases between a rocket ship and the ground, gravitational force remains the same decreases increases pushes less
Answer:
decreases
Explanation:
Gravirational force is directly proportional to the mass and inversely proportional to the distance.(Newton's law of gravitation)
How many atoms are in 365 grams of CaCl2
Answer: 110
Explanation:
if 5.00 mol of hydrogen gas and 1.20 mol of oxygen gas react, what is the limiting reactant?
a. H2
b. O2
c. neither H2 or O2
how many moles of water are produced according to the equation?
Express your answer with the appropriate units.
nH2O=___
If 5.00 mol of hydrogen gas and 1.20 mol of oxygen gas react, the limiting agent is O₂.
The number of moles of water produced according to the equation is 1.20 mol.
To determine the limiting reactant, we need to compare the moles of hydrogen gas (H₂) and oxygen gas (O₂) and determine which reactant is present in a lower stoichiometric ratio.
From the information, we have:
Moles of H₂ = 5.00 mol
Moles of O₂ = 1.20 mol
The balanced equation for the reaction between hydrogen gas and oxygen gas to form water (H₂O) is:
2H₂(g) + O₂(g) -> 2H₂O(g)
According to the stoichiometry of the balanced equation, the ratio of H₂ to O₂ is 2:1. This means that for every 2 moles of H₂, we need 1 mole of O₂ to completely react.
Calculating the stoichiometric ratio for the given amounts:
Moles of H₂ / Coefficient of H₂ = 5.00 mol / 2 = 2.50 mol
Moles of O₂ / Coefficient of O₂ = 1.20 mol / 1 = 1.20 mol
Comparing the calculated stoichiometric ratios, we see that the mole ratio of H₂ (2.50 mol) is greater than the mole ratio of O₂ (1.20 mol). This means that the H₂ is in excess, and O₂ is the limiting reactant.
Therefore, the limiting reactant is O₂.
To determine the number of moles of water (H₂O) produced according to the balanced equation, we can use the stoichiometry:
For every 2 moles of H₂O, we need 1 mole of O₂. Since O₂ is the limiting reactant, the number of moles of H₂O produced is equal to the moles of O₂:
nH₂O = 1.20 mol
Therefore, the number of moles of water produced according to the equation is 1.20 mol.
Learn more about limiting reactant here, https://brainly.com/question/26905271
#SPJ11
Calculate the mass of iron which will be converted into its
oxide (Fe3O4) by the action of 20 grams of steam on it.
3Fe + 4H2O + Fe3O4 + 4H2
Answer: 46.66 Grams
Explanation:
Credits to jasminealexismacias, Enjoy your CK12
Which one of the following decreases as the strength of the attractive intermolecular forces increases? A) The heat of vaporization B) The boiling point of a liquid C) The vapor pressure of a liquid D) The viscosity of a liquid
The heat of vaporization decreases as the strength of the attractive intermolecular forces increases.
The heat of vaporization is the amount of energy required to convert a substance from its liquid phase to its gaseous phase at a constant temperature. As the strength of the attractive intermolecular forces increases, it becomes more difficult for the molecules to overcome these forces and transition into the gas phase.
This means that a greater amount of energy (heat) is required to break the intermolecular forces and vaporize the substance. Therefore, the heat of vaporization increases as the strength of the attractive intermolecular forces increases.
On the other hand, the boiling point of a liquid (B), the vapor pressure of a liquid (C), and the viscosity of a liquid (D) all tend to increase as the strength of the attractive intermolecular forces increases. Higher intermolecular forces result in higher boiling points, lower vapor pressures, and higher viscosity due to the stronger interactions between molecules.
Learn more about heat of vaporization here:
https://brainly.com/question/30403506
#SPJ4
If the pressure in the gas tank of the dipper was set very high, the ideal Gas law breaks
down.
Why is this happening?
a) Argon reacts with the walls of the steel vessel at high pressure
b) The molecules would clump together in the center and invalidate the law
c) A steady measurement could not be made as the gas would leak out too quickly
d) The volume occupied by the molecules themselves is no longer negligible
Answer: d) The volume occupied by the molecules themselves is no longer negligible. This most be the answer because a, b and c don't make any sense at all.
Explanation:
The volume occupied by the molecules themselves is no longer negligible. Hence, option D is correct.
What is an ideal gas equation?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
The ideal gas law fails at low temperature and high pressure because the volume occupied by the gas is quite small, so the inter-molecular distance between the molecules decreases.
Hence, the volume occupied by the molecules themselves is no longer negligible.
Learn more about the ideal gas here:
https://brainly.com/question/27691721
#SPJ2
show that the rydberg equation and the bohr equation are virtually the same.
In short, the Rydberg equation and the Bohr equation are two different forms of the same fundamental relationship, describing the behavior of energy levels and wavelengths in hydrogen or hydrogen-like systems.
What is Rydberg Equation ?
The Rydberg equation is an empirical relationship equation expressed by Balmer and Rydberg.
The Rydberg equation and the Bohr equation are closely related and can be considered different forms of the same mathematical expression. Let's explore them and compare their similarities.
Rydberg equation:
The Rydberg equation is an empirical formula that describes the wavelengths of spectral lines emitted or absorbed by hydrogen or hydrogen species. Is given:
1/λ = R* (1/n₁2 - 1/n₂2)
where λ is the wavelength of emitted or absorbed light, R is the Rydberg constant, and n1 and n₂ are integers representing the principal quantum numbers of the respective energy levels.
Bohr equation:
Bohr's equation, derived from Bohr's model of the hydrogen atom, relates the energy levels of an electron in a hydrogen-like atom to its principal quantum number. Is given:
E = -13.6 eV/n2
where E is the energy of the electron, -13.6 eV is the ionization energy of hydrogen, and n is the principal quantum number.
Now let's compare the two equations:
1/λ = R * (1/n₁2 - 1/n₂2) (Rydberg equation)
E = -13.6 eV/n² (Bohr equation)
We can observe that the Bohr equation gives the energy of the electron in terms of the principal quantum number, while the Rydberg equation gives the wavelength of light emitted or absorbed in terms of the principal quantum numbers.
We can use the relationship between energy and wavelength to make the connection between these two equations:
E = h*c/A
where h is Planck's constant and c is the speed of light.
Combining this relation with the Bohr equation, we have:
-13.6 eV / n² = h * c / λ
Rearranging the equation:
1/λ = (-13.6 eV / n²) / (h * c)
By comparing this equation with the Rydberg equation, we can see that the term (-13.6 eV / n²) / (h * c) is equivalent to the Rydberg constant R. Therefore, we can rewrite the equation as:
1/λ = R* (1/n₁2 - 1/n₂2)
This shows that the Rydberg equation and the Bohr equation are practically the same, just expressed in slightly different forms. The Rydberg constant R in the Rydberg equation includes the constant terms such as the ionization energy, Planck's constant, and the speed of light present in the Bohr equation.
In short, the Rydberg equation and the Bohr equation are two different forms of the same fundamental relationship, describing the behavior of energy levels and wavelengths in hydrogen or hydrogen-like systems.
To learn more about Ryderg Equation from the given link
https://brainly.com/question/14649373
#SPJ4
how to obtain pure aluminium oxide from sodium aluminate. pls help.
Answer:
By Bayer process.
Explanation:
In the Bayer process, bauxite ore is heated in a pressure vessel along with a sodium hydroxide solution (caustic soda) at a temperature of 150 to 200 °C. At these temperatures, the aluminium is dissolved as sodium aluminate (primarily [Al(OH)4]−) in an extraction process.
PLEASE HELP 20 PTS
what is the percent by volume of isopropyl alcohol in a solution that contains 24 mL of isopropyl alcohol in 1.1 L of water?
Answer:
[tex]2.18\%[/tex]
Explanation:
Volume of isopropyl alcohol = 24 mL
Volume of water = 1.1 L
Percentage of isopropyl alcohol is given by
[tex]\dfrac{\text{Volume of isopropyl alcohol}}{\text{Volume of isopropyl alcohol+Volume of water}}\times 100\\= \dfrac{24\times 10^{-3}}{1.1+2.4\times 10^{-3}}\times 100\\ =2.18\%[/tex]
The percent by volume of isopropyl alcohol in the given solution is [tex]2.18\%[/tex].
a sample of br2(g) takes 24.0 min to effuse through a membrane. how long would it take the same number of moles of ar(g) to effuse through the same membrane?
It would take the same number of moles of Ar(g) approximately 6.0 min to effuse through the same membrane.
The Graham's law of effusion states that the rate of effusion of a gas is inversely proportional to the square root of its molar mass (i.e., the larger the molar mass of a gas, the slower it will effuse). Therefore, we can use this law to find the answer to the given problem. Here are the steps to solve the problem:
Step 1: Calculate the molar mass of Br2(g) and Ar(g)
The molar mass of Br2(g) is:1 × 2 + 79.904 × 2 = 159.808 g/mol
The molar mass of Ar(g) is:39.95 g/mol
Step 2: Calculate the ratio of the square roots of the molar masses
Ratio of the square roots of molar masses = sqrt(molar mass of Ar(g)) / sqrt(molar mass of Br2(g))= sqrt(39.95) / sqrt(159.808)= 0.25
Step 3: Calculate the time required for Ar(g) to effuse through the membrane
We can use the ratio of the square roots of molar masses to find the time required for Ar(g) to effuse through the same membrane.
Time for Ar(g) to effuse = (ratio of the square roots of molar masses) × (time for Br2(g) to effuse) = 0.25 × 24.0 min = 6.0 min
Therefore, it would take the same number of moles of Ar(g) approximately 6.0 min to effuse through the same membrane.
Learn more about Graham's law of effusion here:
https://brainly.com/question/32327495
#SPJ11
SO2 +
Li2Se →
SSe2 +
Li20
Type of Reaction:
We want to take inventory of the right and left side
Right: S=1 O = 2 Li = 2 Se= 1
Left: S= 1 Se=2 Li= 2 O=1
Lets balance out each side because we see we are off by 1 oxygen on the left
Add a coefficient of 2 on the Li2O
Add a coefficient of 2 on the right Li2Se
Now we have So2+ 2Li2Se ---> SSe2+ 2Li2O
or
The equation is already balanced, assuming that there is supposed to be a yields symbol between 2Li2Se and SSe2.
To find out whether or not this equation is balanced, make a little T-chart with the left side of the equation on one side and the left on the other. Next to each element, write down the amount they start off with and make changes as you add coefficients.
Hope this helps!
Jess is baking a cake. Part of the recipe has Jess mix butter and water. He notices that the two substances don't mix. He is confused because water and butter are both covalent compounds. Explain why the butter and water are NOT mixing in the bowl.
Answer:
butter and water don't mix because water is polar and butter is nonpolar
Explanation:
for them to be able to mix they would need to be both polar or both nonpolar.
____ N2 + ___ H2 --> ____ NH3
Reaction :
N2 +H2 →2 NH3
"Reactants Products Nitrogen 2 2 Hydrogen 2 6 Since NH3 is multiplied by a coefficient of 2 there are now 2 nitrogens and 6 hydrogens. The 6 hydrogens come from the 2 multiplied by the subscript of 3."
Which of Graphs 1 correctly represents the relationship between the pressure and Kelvin temperature of a gas?
Answer:
B
Explanation:
Pressure is directly proportional to temperature
The graph correctly showing the pressure - temperature relationship is figure B. Temperature and pressure is in direct proportionality.
What is Gay- Lussacs law?According to Gay-Lussacs law, at constant volume of gases, the pressure of a gas is directly proportional to the temperature. Thus we can write it as:
P/T = a constant.
Gay-Lussacs law is supportive of kinetic molecular theory. As per kinetic theory of gases, as the temperature increases, kinetic energy of particles increases results in forceful collisions of energetic particles to the wall of container and in between them.
Therefore, the temperature - pressure graph will show a linear relationship. The figure B represents a linear curve and hence it shows the correct relation.
To find more on kinetic theory, refer here:
https://brainly.com/question/15357425
#SPJ2
A buildup of charges in an object is called
Answer:
Static Electricity
Explanation:
Answer:
static electricity
Explanation:
Use standard free energies of formation to calculate ΔG∘ at 25 ∘C for the following reaction and predict if the reaction will be spontaneous
at this temperature under the standard conditions.
3H2(g)+Fe2O3(s)→2 Fe(s)+3H2O(g)
At 25 ∘C, the calculated value of ΔG∘ for the reaction 3H2(g) + Fe2O3(s) -> 2Fe(s) + 3H2O(g) is 138.4 kJ/mol. Since ΔG∘ is positive, the reaction is non-spontaneous under standard conditions at this temperature. A positive ΔG∘ indicates that the reaction requires energy input to occur.
To calculate ΔG∘ at 25 ∘C for the reaction 3H2(g) + Fe2O3(s) -> 2Fe(s) + 3H2O(g) using standard free energies of formation, we need to subtract the sum of the standard free energies of formation of the reactants from the sum of the standard free energies of formation of the products.
The standard free energies of formation for the given compounds at 25 ∘C can be looked up in reference tables. The values are as follows:
ΔG∘f(H2(g)) = 0 kJ/mol
ΔG∘f(Fe2O3(s)) = -824.2 kJ/mol
ΔG∘f(Fe(s)) = 0 kJ/mol
ΔG∘f(H2O(g)) = -228.6 kJ/mol
Using these values, we can calculate ΔG∘ for the reaction:
ΔG∘ = (2 * ΔG∘f(Fe(s)) + 3 * ΔG∘f(H2O(g))) - (3 * ΔG∘f(H2(g)) + ΔG∘f(Fe2O3(s)))
ΔG∘ = (2 * 0 kJ/mol + 3 * (-228.6 kJ/mol)) - (3 * 0 kJ/mol + (-824.2 kJ/mol))
ΔG∘ = -685.8 kJ/mol + 824.2 kJ/mol
ΔG∘ = 138.4 kJ/mol
At 25 ∘C, the calculated value of ΔG∘ for the reaction 3H2(g) + Fe2O3(s) -> 2Fe(s) + 3H2O(g) is 138.4 kJ/mol. Since ΔG∘ is positive, the reaction is non-spontaneous under standard conditions at this temperature. A positive ΔG∘ indicates that the reaction requires energy input to occur.
To know more about non-spontaneous reaction visit:
brainly.com/question/14871600
#SPJ11
The Kinetic Molecular Theory describes the behavior as well as the characteristics of an ideal gas. What are the five postulates of this theory? Provide at least 3 examples to describe these postulates.
Answer:
See explanation
Explanation:
The postulates of the kinetic theory of matter are;
Every substance is made up of tiny particles called molecules. Brownian motion and diffusion illustrates this fact.The molecules that compose matter are in constant random motion.There exists an attractive force between the molecules in matter. The attractive forces between gases are negligible. Solids have a definite shape and volume due to a high magnitude of intermolecular forces. Liquids have a volume but no definite shape due to weaker intermolecular forces. Gases have the weakest intermolecular forces hence the do not have both a shape and volume. They take on the volume of the container into which they are put. This illustrates this fact.The actual volume occupied by gas molecules is negligible relative to the volume of the container. The fact that gases are easily compressible illustrates this fact.Temperature is a measure of the average kinetic energy of the molecules of a body.in the circular flow diagram, what do firms provide to product markets?
In the circular flow diagram, firms provide goods and services to product markets.
A circular flow diagram is a simplified economic model that demonstrates how money, goods, and services flow between households and firms in an economy. This diagram is divided into two markets: the product market and the factor market. The factor market deals with inputs such as labor, capital, and raw materials, while the product market deals with outputs such as goods and services.What do firms provide to product markets?Firms are companies or businesses that generate goods or services. In the circular flow diagram, firms produce goods and services that are sold in the product market. Firms sell products to product markets. This process generates revenue for the firms, which they utilize to pay for inputs such as labor and raw materials.
To know more about circular flow diagram visit:
https://brainly.com/question/26674132
#SPJ11
1. Complete the balanced dissociation equation for the compound below. If the compound does not dissociate, write NR after the reaction arrow.
(NH4)2S(s) -> ______
2. Write the balanced NET ionic equation for the reaction when Al(NO₃)₃ and Na₃PO₄ are mixed in aqueous solution. If no reaction occurs, write only NR.
Answer:
1. (NH₄)₂S(s) -----> NH₄+(aq) + S²-(aq)
2. Al³+ (aq) + PO₄³+ (aq) ----> AlPO₄ (s)
Explanation:
The dissociation of ammonium sulphide, (NH₄)₂S when dissolved in water is given in the equation below:
(NH₄)₂S(s) -----> NH₄+(aq) + S²-(aq)
However very little S²- ions are present in solution due to the very basic nature of the S²- ion (Kb = 1 x 105).
The ammonium ion being a better proton donor than water, donates a proton to sulphide ion to form hydrosulphide ion which exists in equilibrium with aqueous ammonia.
S²- (aq) + NH₄+ (aq) ⇌ SH- (aq) + NH₃ (aq)
Aqueous solutions of ammonium sulfide are smelly due to the release of hydrogen sulfide and ammonia, hence, their use in making stink bombs.
2. The reaction between aluminium nitrate and sodium phosphatein aqueous solution is a double decomposition reaction whish results in the precipitation of insoluble aluminium phosphate. The equation of the reaction is given below :
Al(NO₃)₃ (aq) + Na₃PO₄ (aq) ----> AlPO₄ (s) + 3 NaNO₃ (aq)
The net ionic equation is given below:
Al³+ (aq) + PO₄³+ (aq) ----> AlPO₄ (s)
where do elements in the human body tend to be located on the periodic table
The elements in the human body tend to be located in different regions of the periodic table. This is because the human body is made up of a wide range of elements, each with its own properties, uses, and functions. Overall, the elements in the human body tend to be located in different regions of the periodic table depending on their properties and functions.
Most of these elements are found in the first four rows of the periodic table, which are also known as the main group elements. These elements include hydrogen, carbon, nitrogen, oxygen, phosphorus, and sulfur, which are all essential for life. They are located in different regions of the periodic table, with hydrogen in the first row, carbon and nitrogen in the second row, oxygen in the third row, and phosphorus and sulfur in the fourth row. Other important elements in the human body include sodium, potassium, calcium, magnesium, iron, and zinc, which are located in the lower regions of the periodic table. Overall, the elements in the human body tend to be located in different regions of the periodic table depending on their properties and functions.
To know more about periodic table visit:
https://brainly.com/question/28747247
#SPJ11
What is the pH at the half-equivalence point in the titration of a weak base with a strong acid? The pKb of the weak base is 7.95.
a. 7.95
b. 8.75
c. 6.05
d. 5.25
Titration is the process of determining the amount of a substance in a solution by measuring the volume of a solution with a known concentration that is required to react with it. The answer to the given question is option d) 5.25.
In the titration of a weak base with a strong acid, the pH at the half-equivalence point can be calculated as follows: At the half-equivalence point, we have equal moles of the weak base and the strong acid. As a result, we get a solution that contains the weak base, its conjugate acid, and water. In the solution, there is an equilibrium between the weak base and its conjugate acid. This equilibrium has an acid dissociation constant, Ka. It's given by:
Ka = [H+][A–]/[HA]
The pKa is calculated by taking the negative logarithm of Ka:
pKa = -log(Ka)
At the half-equivalence point, [HA] = [A–] and the expression for pKa becomes:
pKa = -log([H+])
Therefore, the pH at the half-equivalence point is:
pH = 1/2 (pKb + pKa)
Given that pKb = 7.95 for the weak base, we can calculate the pKa:
pKw = 14 (at 25°C)
pKw = pKa + pKb
14 = pKa + 7.95
pKa = 6.05
Therefore, the pH at the half-equivalence point is:
pH = 1/2 (7.95 + 6.05)
pH = 1/2 (14)
pH = 7
At the half-equivalence point, the pH of the solution is equal to 7. Therefore, option d) 5.25 is incorrect.
To know more about concentration visit:
https://brainly.com/question/3045247
#SPJ11
calculate the enthalpy change δh for the reaction: 2so2(s) o2(g)→2so3(g)
From 250.0 g of [tex]SO_{2}[/tex], approximately -772.44 kJ of heat is produced, and approximately 24.21 g of [tex]SO_{3}[/tex] are produced when the observed enthalpy change is -75.0 kJ.
To calculate the heat produced from a given amount of [tex]SO_{2}[/tex]and the grams of [tex]SO_{3}[/tex] produced when the observed enthalpy change is given, we need to use the stoichiometry and molar masses of the compounds involved.
First, let's calculate the moles of [tex]SO_{2}[/tex]present in 250.0 g:
Molar mass of [tex]SO_{2}[/tex]= 32.07 g/mol + 32.07 g/mol = 64.14 g/mol
Moles of [tex]SO_{2}[/tex]= Mass of [tex]SO_{2}[/tex]/ Molar mass of [tex]SO_{2}[/tex]
= 250.0 g / 64.14 g/mol
≈ 3.897 mol
Using the stoichiometry of the balanced equation, we can determine the moles of [tex]SO_{3}[/tex]produced:
From the balanced equation: 2 mol [tex]SO_{2}[/tex] → 2 mol [tex]SO_{3}[/tex]
So, 3.897 mol [tex]SO_{2}[/tex]→ (3.897 mol [tex]SO_{3}[/tex]/ 2 mol [tex]SO_{2}[/tex]) = 1.9485 mol [tex]SO_{3}[/tex]
Next, let's calculate the heat produced using the given enthalpy change:
Heat produced = Moles of [tex]SO_{2}[/tex]* ΔH
Heat produced = 3.897 mol [tex]SO_{2}[/tex]* (-198.2 kJ/mol)
≈ -772.44 kJ
Therefore, approximately -772.44 kJ of heat are produced from 250.0 g of [tex]SO_{2}[/tex].
Finally, let's calculate the grams of [tex]SO_{3}[/tex]produced when the observed enthalpy change is -75.0 kJ:
Given ΔH = -75.0 kJ
Moles of [tex]SO_{3}[/tex]= ΔH / ΔH for the balanced equation
= -75.0 kJ / (-198.2 kJ/mol)
≈ 0.3782 mol
Using the molar mass of [tex]SO_{3}[/tex]:
Molar mass of [tex]SO_{3}[/tex] = 32.07 g/mol + 16.00 g/mol + 16.00 g/mol = 64.07 g/mol
Grams of [tex]SO_{3}[/tex]= Moles of [tex]SO_{3}[/tex]* Molar mass of [tex]SO_{3}[/tex]
= 0.3782 mol * 64.07 g/mol
≈ 24.21 g
Therefore, approximately 24.21 g of are produced when the observed enthalpy change is -75.0 kJ.
Learn more about Enthalpy change here:
https://brainly.com/question/14047927
#SPJ4
The complete question is:
Given a thermochemical equation: 2SO2 (g) + O2 (g) --> 2SO3 (g), ΔH=-198.2 kJ . How many kJ of heat are made from 250.0 g SO2? . How many grams of SO3 (g) are produced when the observed enthalpy change is -75.0 kJ? Report all answers to 3 significant figures and include signs (where appropriate) and units.
The decomposition of N2O5 in a solution of carbon tetrachloride occurs as shown in the balanced chemical equation below:
2N2O5 (aq) → 4NO2 (aq) + O2 (aq)
This reaction is a first-order process with a rate constant of 4.82 x 10-3 s-1. If the initial concentration of N2O5 is 0.150 M, how much N2O5 will remain after 300.0 seconds?
a. 0.0353 M
b. 0.0553 M
c. 0.0762 M
d. 5.00 x 10-4 M
e. 0.104 M
Therefore, after 300.0 seconds, approximately 0.0553 M of N₂O₅ will remain. The correct answer is option b: 0.0553 M.
To determine how much N2O5 will remain after 300.0 seconds, we can use the first-order rate equation:
ln(N₂O₅t/N₂O₅₀) = -kt
Where N₂O₅t is the concentration of N₂O₅ at time t, N₂O₅₀ is the initial concentration of N₂O₅, k is the rate constant, and t is the time.
Substituting the given values:
N₂O₅t = N₂O₅₀ ₓ e^(-kt)
N₂O₅t = 0.150 M * e^(-4.82 x 10⁻³ s⁻¹ ˣ 300.0 s)
N₂O₅t ≈ 0.0553 M
Therefore, after 300.0 seconds, approximately 0.0553 M of N₂O₅ will remain.
The correct answer is option b: 0.0553 M.
To know more about first-order rate equation
https://brainly.com/question/31354306
#SPJ11
.What is the pH of a 0.023 M HCl solution?
Use the DIvergence theorem to compute the flux of the vector field F(x,y,z) = x3 i + y3 j + z3 K
over the surface\sigmawhich is the surface of the sphere x2 + y2 + z2 = 9
(hint: after setting up the triple integral, use spherical coordinates to compute it)
To compute the flux of [tex]F(x, y, z) = x^3 i + y^3 j + z^3 k[/tex] over the surface Σ of the sphere [tex]x^2 + y^2 + z^2 = 9[/tex] using the Divergence Theorem, set up and evaluate the triple integral in spherical coordinates:Flux = ∫₀²π ∫₀ᴨ ∫₀³ ([tex]3p^4[/tex] sin(φ)) dρ dθ dφ
To compute the flux of the vector field [tex]F(x, y, z) = x^3 i + y^3 j + z^3 k[/tex] over the surface Σ, which is the surface of the sphere [tex]x^2 + y^2 + z^2 = 9[/tex], we can apply the Divergence Theorem.
The Divergence Theorem states that the flux of a vector field across a closed surface is equal to the triple integral of the divergence of the vector field over the volume enclosed by the surface.
First, let's calculate the divergence of F:
div(F) = (∂/∂x)([tex]x^3[/tex]) + (∂/∂y)(y^3) + (∂/∂z)([tex]z^3[/tex])
= [tex]3x^2 + 3y^2 + 3z^2[/tex]
Now, we need to set up the triple integral using spherical coordinates.
In spherical coordinates, the volume element is given by [tex]dV = P^2[/tex] sin(φ) dρ dθ dφ, where ρ is the radial distance, θ is the azimuthal angle, and φ is the polar angle.
The surface Σ represents the boundary of the volume enclosed by the sphere. In spherical coordinates, the equation of the sphere [tex]x^2 + y^2 + z^2 = 9[/tex]becomes [tex]p^2 = 9[/tex].
The unit outward normal vector on the surface of the sphere can be expressed as n = (ρ/3)p, where p is the unit vector in the radial direction.
Using the Divergence Theorem, the flux (F · n) over the surface Σ is equal to the triple integral of the divergence of F over the volume enclosed by Σ:
Flux = ∭V (div(F)) dV
= ∭V ([tex]3p^2[/tex]) dV
= ∫₀²π ∫₀ᴨ ∫₀³ (3[tex]p^2[/tex]) [tex]p^2[/tex] sin(φ) dρ dθ dφ
Here, the limits of integration are as follows:
ρ: 0 to 3
θ: 0 to 2π
φ: 0 to π
Now, we can calculate the flux by evaluating the triple integral:
Flux = ∫₀²π ∫₀ᴨ ∫₀³ ([tex]3p^4[/tex] sin(φ)) dρ dθ dφ
Evaluating this triple integral will give us the flux of the vector field F over the surface Σ.
To know more about azimuthal, checkout
https://brainly.com/question/30524265
#SPJ4
Which of the isomeric alcohols having the molecular formula C6H14OC6H14O are chiral? Which are achiral?
1-hexanol, 2-hexanol, and 3-hexanol are chiral because they possess a chiral center. 2-methylpentanol is achiral because it lacks a chiral center.
To determine which isomeric alcohols with the molecular formula C₆H₁₄O are chiral and which are achiral, we need to examine their structural features, specifically the presence or absence of a chiral center.
A chiral center is a carbon atom bonded to four different substituents, resulting in non-superimposable mirror images. If a molecule has a chiral center, it is chiral; otherwise, it is achiral.
Let's examine the structural isomers of C₆H₁₄O
1-Hexanol (CH₃(CH₂)₄OH)
This molecule contains a chiral center at the carbon atom bonded to the hydroxyl group (OH). Since it has four different substituents (CH₃, CH₂, CH₂, and H), 1-hexanol is chiral.
2-Hexanol (CH₃CH₂CH(OH)CH₂CH₃)
This molecule also contains a chiral center at the carbon atom bonded to the hydroxyl group (OH). It has four different substituents (CH₃, CH₂, CH₂, and CH₃), making 2-hexanol chiral.
3-Hexanol (CH₃CH₂CH₂(OH)CH₂CH₃)
Similarly, this molecule contains a chiral center at the carbon atom bonded to the hydroxyl group (OH). It has four different substituents (CH₃, CH₂, CH₂, and CH₃), making 3-hexanol chiral.
2-Methylpentanol (CH₃CH(CH₃)CH₂CH₂OH)
In this molecule, there is no chiral center present since the carbon atom bonded to the hydroxyl group (OH) is also bonded to two identical methyl groups (CH₃). Therefore, 2-methylpentanol is achiral.
To know more about chiral here
https://brainly.com/question/29022658
#SPJ4
My teacher didn’t explain this. Please Help Me!!
Due to their low melting points nitrogen oxygen and helium are examples of which type of matter when at room
temperatures?
A. Gas
B.liquid
C.Plasma
D. Solid
Do bananas have seeds?
Answer:
no they dont
Explanation: