Answer:
2.09 atm
Explanation:
Given: Temperature of system. volume of system, and masses of component gasses.
In order to get the mole fraction which we will use later, convert the 60.0 g CO2 and 82.1 g H20 into moles and add the number of moles you got yo 7.30.
(60.0g CO2 / 44.01 g/mole) + (82.1g H20/18.02) + 7.30 moles unknown fuel
This should work out to about 13.22 moles total. Then, plug in your numbers to the ideal gas law (PV=nRT or P=nRT/V). This will result in the total pressure of the system. p=(13.22 moles)x(0.08206 l*ATM/moles *K)x(468.2)/25.0L. This equation results in a total of 20.3 atm. According to Daltons law of partial pressure, the mole fraction (moles of a gas over total moles) of a given gas times the total pressure of the container gives the partial pressure.
(1.36/13.22) * 20.3 atm=2.09 atm
Please help! Its world science!
1. If you turn on the burner on a gas stove under a pan of cold water, energy moves from the burner to the pan of water. What is this type of energy transfer called?
2. If you burn wood in a fireplace, which type of energy resource are you using?
3. Which form of energy is an important factor in making electricity from water power?
4. What is a hydrocarbon?
5. What byproduct of nuclear energy has caused concerns about the use of this resource and why?
6. Which chemical element exposed in surface coal mining can cause environmental problems in nearby bodies of water?
7. What is the original source of most energy used on Earth?
8. When we burn a fuel, what is released that allows work to be done?
9. For biomass, solar, coal, natural gas, oil, and geothermal energy, identify each energy resource as renewable or non-renewable.
10. What factors are important in judging how helpful an energy resource is to us?
Energy as the ability to do work.
What is energy?
Energy has been defined as the ability to do work. Modern civilization is possible because people have learned how to change energy from one form to another and then use it to do work. People use energy to walk and for bicycle, to move cars along roads and boats through water, to cook food on stoves, to light our homes and offices, to manufacture products.
There are different forms of energy, which may include:
HeatLightMotionElectricalChemicalGravitationalMagneticThese forms of energy can be grouped into two general types;
Potential (stored energy)Kinetic (working energy)Explanations
1. This is called convection.
2. You are using chemical energy and converting it to thermal (heat) energy.
3. Kinetic energy is the important factor
4. A hydrocarbon is an organic compound consisting entirely of hydrogen and carbon. Hydrocarbons are generally colourless and hydrophobic, and their odors are usually weak or exemplified by the odors of gasoline. Examples of hydrocarbons are coal, petroleum, natural gas and tar. They are used as energy sources.
5. Radioactive waste. These materials can remain radioactive and dangerous to human health for thousands of years.
6. Mercury.
7. The energy of the sun is the original source of most energy used on Earth.
8. Heat is released and this heat expended allows work to be done.
9.
biomass - renewablesolar - renewablecoal - non-renewablenatural gas - non-renewableoil - non-renewablegeo-thermal energy - renewable10.
It produces a lot of heat per unit mass.It does a huge amount of work per unit mass.It is easily accessible.It is easy to store and transport.It is economical.It produces less amount of smoke.Learn more about energy:https://brainly.com/question/13881533
#SPJ1
what is a frozen energy?
An electric drill pulls 1000 joules per second or electrical energy from
the wall. The drill bit only exerts 555 joules of energy on the wood it's
drilling through. Where did all the extra energy go?
All of the energy stored or applied on a body cannot be converted tono work done only the available form of energy is converted to work. The remaining part is called unavailable energy which is stored on the body or taken as increase in entropy.
What is unavailable energy?According to thermodynamic concepts, the not all the energy can be converted into useful work .Or in other words only available energy can be converted to work. This available form of energy is called Gibbs energy.
For instance if we take a heat engine, the heat from the hot body is not completely transferred into colder body. According to third law of thermodynamics, this unavailable work is being considered as gone for increase in entropy.
Therefore, only available energy of the electric drill can be changed to work done and that is 222 J out of 1000 J, remaining goes for an increase in entropy of the system.
To find more on entropy, refer here:
https://brainly.com/question/24278877
#SPJ1
Draw a structural formula for the product of this diels-alder reaction, including all stereoisomers of the product.
The product formed in the Diels-Alder reaction is given below. It is a (4+2) addition and a cis-product is formed.
Two organizations in a molecule can be distinctive and, if changed, generate compounds that are stereoisomers. A magnetic interaction arises among two debris such as hydrogen nuclei with non-0 spin. when two enantiomers have exclusive charges of reaction. A not-unusual instance of a pair of enantiomers is dextro lactic acid and laevo lactic acid.
The definition of a stereoisomer is any of a group of isomers wherein atoms are linked inside the identical order but fluctuate in their spatial association. In stereoisomerism, the atoms making up the isomers are joined up inside the identical order, but nevertheless, control to have an exceptional spatial arrangement. Geometric isomerism is one form of stereoisomerism. these isomers arise when you have confined rotation someplace in a molecule.
Learn more about Stereoisomers here:-https://brainly.com/question/24128816
#SPJ4
Enter the complete ionic equation to show the reaction of aqueous lead(ii) nitrate with aqueous potassium sulfate.
The full ionic equation for the conversion of aqueous lead (II) nitrate to solid lead (II) sulfate and aqueous potassium nitrate is as follows:
What is ionic equation ?PbSO4(s) + 2 K+ + 2 NO3 = Pb2+(aq) + 2 NO3(aq), 2 K+(aq), and SO42(aq) (aq)
Let's look at the molecular formula that results in solid lead (II) sulfate and aqueous potassium nitrate when aqueous lead (II) nitrate and aqueous potassium sulfate interact. This reaction involves two displacements.
PbSO4(s) + 2 KNO3 = Pb(NO3)2(aq) + K2SO4(aq) (aq)
All ions and molecular species are included in the full ionic equation.
PbSO4(s) + 2 K+ + 2 NO3 = Pb2+(aq) + 2 NO3(aq), 2 K+(aq), and SO42(aq) (aq)
The full ionic equation for the conversion of aqueous lead (II) nitrate to solid lead (II) sulfate and aqueous potassium nitrate is as follows:
PbSO4(s) + 2 K+ + 2 NO3 = Pb2+(aq) + 2 NO3(aq), 2 K+(aq), and SO42(aq) (aq)
To learn more about ionic equation refer to
https://brainly.com/question/13879496
#SPJ4
Draw the structure of the major organic product formed in the reaction of 1−methylcyclohexene with bromine in water.
The major organic product formed in the reaction of 1−methylcyclohexene with bromine in water is attached as a picture.
A reaction mechanism is a representation of step by step transfer of electrons and molecules from one compound to another compound. In reaction mechanisms, the curved arrows show the moment of electrons.
In the reaction mechanism of 1-methyl cyclohexene the double bond of 1-methyl cyclohexene act as an attacking group and attacks Br2. As a result, one Br atom gets attached to 1-methyl cyclohexene. This results in a carbocation generation on the carbon having the methyl group. This carbon cation then attacks the oxygen of water molecules and the organic product (1S,2S)-2-bromo-1-methylcyclohexan-1-ol will generates as the major product.
You can also learn about organic products from the following question:
https://brainly.com/question/13513481
#SPJ4
Metal x loses 3 electrons. The resulting charge of Metal X is
Answer:
the correct answer is 5
Explanation:
i just know
What is the oxidation state for nitrogen
Solve the subgame on the left, where the Religious Party is moderate, as if there were no uncertainty. What is the subgame perfect Nash equilibrium? Note: write the equilibrium in the form (Regime’s move; Moderate party’s move).
The subgame perfect Nash equilibrium is to hold elections to pursue the moderate policy.
A perfect Nash equilibrium for a subgame is usually derived from the game's various final outcomes by backward induction eliminating branches where each player makes incredible moves from that node. The main difference between subgame perfect equilibrium and Nash equilibrium is that subgame perfect equilibrium requires all threats to be reliable.
Therefore, the study of the perfect balance of subgames is a reliable threat study. Subgame perfect equilibria are a subset of Nash equilibria. A Nash equilibrium of an extended game is a subgame perfect equilibrium if every subgame induces a Nash equilibrium game. A Nash equilibrium in which no part of the player's strategy contains incredible threats or promises is called a complete subgame.
Learn more about Nash equilibrium here:-https://brainly.com/question/7141724
#SPJ4
5- Charlotte throws 5 darts and they all end up in the outer ring of the dart board. Describe her:
Precision-ne Shot
Accuracy:
The Charlotte throws 5 darts and they all end up in the outer ring of the dart board is they are neither precise nor accurate.
Precise is defined as how close the measurement are with one another. Accuracy is defined as how the measurement is close to the correct value. if all the dart is close to each other but not on bullseye than it is high precise and low accurate. if the the dart are in the bullseyes and close to each other it is said to be high precise and high accurate.
Thus, The Charlotte throws 5 darts and they all end up in the outer ring of the dart board is they are neither precise nor accurate.
To learn more about precise and accurate here
https://brainly.com/question/28289139
#SPJ1
what reaction conditions favor elimination in an acid-catalyzed dehydration? what reaction conditions favor elimination in an acid-catalyzed dehydration? the product is removed from the reaction mixture as it is formed the acid used has a strongly nucleophilic conjugate base low reaction temperature is used
Reaction conditions that favor elimination in an acid-catalyzed dehydration : product is removed from the reaction mixture when formed. For reaction to be completed, hypochlorous acid must be in excess during the reaction.
What is acid-catalyzed dehydration?Acid-catalyzed dehydration of alcohols takes place when an acid puts an extra hydrogen atom on the alcohol. This causes change in the OH alcohol group into an H2O or water group attached to the organic compound. When that particular molecule leaves then it leaves as water . Therefore dehydration occurs.
The activity of a solid acid on methanol dehydration reaction was found to be determined by the number of its acidic sites. The presence of such acid catalyst in the catalytic system shifts the methanol synthesis reaction, increasing the pass conversion of CO.
To know more about Acid-catalyzed dehydration, refer
https://brainly.com/question/16975684
#SPJ4
PLEASE HELP -- question in picture
The sequence of the decreasing the order of stability of the given compounds is :
BaCl₂ > CaCl₂ > MgCl₂ > AlCl₃ > HCl > AgCl
What is reactivity series?The reactivity series of metals or the activity series can be described as the arrangement of metals in the descending order of their reactivities.
The metals at the top of the activity series are powerful reducing agents and can be easily oxidized. These metals easily tarnish/corrode. The reducing ability grows weaker while moving down the series.
The electropositivity of the elements reduces as we move down the reactivity series of metals. All metals above hydrogen in the activity series liberate hydrogen gas upon reacting with dilute HCl.
As given the elements of the reactive metals form more stable compounds therefore, the metals like Ba, Ca, and Mg form more stable compounds than H or Ag.
Learn more about the reactivity series, here:
https://brainly.com/question/13960839
#SPJ1
Answer:
pic attached
Explanation:
When performing today’s experiment you leave the lid off your setup for the calibration. You remember that you left it off and decide to add it when determining the heat lost by the metal. When performing your calculations, you determine that your heat capacity values are off. Would your values be too high or too low?.
The heat capacity values obtained will be too low due to the heat lost.
What are the heat capacity values of substances?The heat capacity of a substance is the amount of heat required to raise the unit mass of that substance by one-degree celsius.
In order to determine the heat capacity of a substance, the method of calorimetry is used.
In the method of calorimetry, it is assumed that no heat is lost during the process.
The principle states that the heat lost is equal to the heat gained.
Hence, if heat is lost from the calorimeter during the process of determining the heat capacity of a substance, the heat capacity value will be lower than the actual values.
Learn more about heat capacity at: https://brainly.com/question/27991746
#SPJ1
which isotopes would you expect to be stable?
Isotopes of elements having atomic number less than 20 and with a neutron to proton ratio of close to 1 are more likely to be stable.
What is an isotope?
Isotopes are two or more atom kinds that share the same atomic number (protons in the nucleus), placement in the periodic table, and chemical element but have distinct nucleon numbers (mass numbers) as a result of possessing a different quantities of neutrons in their nuclei. Although the chemical properties of each isotope of a given element are nearly identical, they differ in their atomic weights and physical characteristics. The atomic number of an atom is the sum of the number of protons in the nucleus and the number of electrons in a neutral (non-ionized) atom. The mass number of an atom is determined by the quantity of nucleons—both protons and neutrons—in its nucleus, and it varies for each isotope of a given element.
Isotopes of elements having atomic number less than 20 and with a neutron to proton ratio of close to 1 are more likely to be stable.
To learn more about an isotope, click on the link
https://brainly.com/question/1401027
#SPJ4
Look closely at the Sodium square below the table. Using the information in the square and the position of Sodium on the periodic table, describe sodium atoms with as much detail as you can. Below is a word bank. These are words that can help you with your description. You do not have to use all of them, but you should use some of them. DO NOT just define the words, use the words in your description. Make sure you are writing your OWN words. No copying and pasting. Word bank: protons, neutrons, electrons, atomic mass, atomic number, valence electrons, energy levels, group, period, metal, non-metal, metalloid
Organic molecules form _________ bonds and inorganic compounds form _________ bonds.
Organic molecules form covalent bonds and inorganic compounds form ionic bonds.
What are ionic and covalent bonds?
The main interaction in ionic compounds is ionic bonding, a type of chemical bonding that involves the electrostatic attraction between two atoms or ions with dramatically different electronegativities.
A chemical link known as a covalent bond includes the sharing of electrons between atoms to generate electron pairs. Covalent bonding is the stable equilibrium of the forces of attraction and repulsion between atoms when they share electrons.
Inorganic compounds have ionic bonds. There is always an ion-dipole attraction when inorganic compounds are combined with water, meaning the ions are solvated (hydrated)
Covalent bonding is frequently seen in molecules containing carbon, usually known as organic compounds. The two atoms' common pair of electrons has now extended around their nucleus, resulting in the formation of a molecule.
Learn more about topic ionic and covalent bonds: https://brainly.com/question/11527546
#SPJ4
defintion of producer
Answer:
a producer is an organisms that produce food for themselves and other organisms.
What mass of mgf2 is contained in 80. 85 g of a 22. 4% by mass solution of mgf2 in water?.
18.1 g is mass of mgf2 is contained in 80. 85 g of a 22. 4% by mass solution of mgf2 in water.
solution mass = 80.85 g
mass of solution percentage = 22.4%
% concentration = Mass of solute/Mass of solution × 100/1
22.4 = x/80.85 × 100/1
x = 22.4 × 80.85/100
x = 18.1 g
The quantity of substance that makes up an element's atom is known as its atomic mass. One-twelfth of the mass of the carbon-12 atom, with an assigned atomic mass of 12 units, is expressed as a multiple of 1.992646547 1023 gram, or in other words, 1.992646547 gram. One atomic mass unit is equivalent to 1.660539040 1024 grams on this scale (amu). The atomic mass unit is sometimes referred to as the dalton in honor of English scientist John Dalton (Da).
To know more about mass visit : brainly.com/question/5661976
#SPJ4
distillation is the separation of multiple
Distillation is the separation of multiple liquids. it means the selective boiling and subsequent condensation of a component in a liquid mixture.
Distillation It is a separate technique that can be used either to increase the concentration of a particular component in a mixture or to obtain pure components from a mixture.
The process of distillation takes advantage of the difference in boiling points of the components in a liquid mixture by converting one of them into a gaseous state. Distillation is not a chemical reaction but can be considered a physical separation process.
To know more about boiling point click here:
https://brainly.com/question/25777663
#SPJ4
How many atoms does K2Zn02 have?
Based on the number of atoms in 1 mole of a substance, the number of atoms in 1 mole of K₂ZnO₂ is 3.01 * 10²⁴ atoms.
What are atoms?Atoms are the smallest particle of an element that can exist and still retain the properties of that element.
Atoms of elements take part in chemical reactions.
The number of atoms in a mole of a substance is equal to 6.03 * 10²³.
In 1 mole of the compound K₂ZnO₂:
there are 2 moles of K atoms = 6.03 * 10²³ * 2 atoms
there are 1 mole of Zn atoms =6.03 * 10²³ atoms
There are 2 moles of O atoms = 6.03 * 10²³ * 2 atoms
Total number of atoms in 1 mole of K₂ZnO₂ = 3.01 * 10²⁴ atoms.
Learn more about atoms at: https://brainly.com/question/441927
#SPJ1
Two students are planning an investigation to determine which type of bond, ionic or covalent, is more polar. Which one of the tests would be relevant to their experiment?.
The property that will be least helpful in the determination of the bond type that has the strongest intermolecular forces is C. Conductivity in water.
It should be noted that the students wanted to investigate whether ionic or covalent bonds have stronger intermolecular forces.
In order to carry out the investigation, salt, sugar, and molar balls are used. Based on this, the property that is required for the investigation will be flammability, solubility in water, and the melting point.
The conductivity in water isn't required.
george determines the mass of his evaporating dish to be 7.548 g. he adds a solid sample to the evaporating dish, and the mass of them combined is 23.766 g. what must be the mass of his solid sample? express your response to three digits after the decimal.
The data is provided as follows.
The evaporating dish's mass is 3.375 g.
total mass = mass of the solid sample plus the evaporating dish
Specifically, 26.719 g (Mass of solid sample + evaporating dish)
So, using the following formula, we can determine the mass of the solid sample.
mass of evaporating dish = (mass of evaporating dish - mass of solid sample)
= 26.719 g – 3.375 g
= 23.344 g
This leads us to the conclusion that his solid sample's mass must be 23.344 g.
What is Evaporating dish ?A piece of glassware used in laboratories called an evaporating dish is used to evaporate solutions and supernatant liquids, sometimes to the point of melting.
The main significant distinction between an evaporating dish and a watch glass is that a watch glass typically lacks sides and rims and resembles a contact lens more in terms of shape. The reason behind the name of these objects is that they mimic the glass case of a wristwatch.
To know more about Evaporating dish please click here ; https://brainly.com/question/23131911
#SPJ4
block
wood with blac
4. Find the density of a piece of wood with a mass of 50.0 grams and a volume of 100. cm³.
=2g/cm3
Will it float on water?
The density of the wood will be 0.5g/cm³ . It will float in water because its density is than that of water i.e, 1g/cm³ .
Given that the mass of the substance is 50 g and its volume is 100cm³
So, its density will be given as,
Density= Mass/ Volume
=50/ 100 g/cm³
= 0.5 g/cm³
When placed in water, an object with a density greater than or less than that of water will float or sink, respectively. A substance's density is a defining characteristic that is independent of substance's volume.
The substance's density is less than that of water. Due to lower density than water, the substance will float on the surface of water.
To know more about density of water, please refer:
https://brainly.com/question/24550995
#SPJ1
Decribe a method for making pure crytal of magneium chloride from magneium and dilute hydrochloric acid
A method for making pure crystal of magnesium chloride from magnesium and dilute hydrochloric acid can be done using filter paper.
How pure crystal of magnesium chloride can be obtained from magnesium and dilute hydrochloric acid ?For this method, use a filter paper and funnel.
As, magnesium chloride is in aqueous form, it will come out with the filtrate(solution).
take hydrochloric acid in beaker:
• Keep adding small pieces of magnesium ribbon, until magnesium is in excess
• filter using filter paper and funnel and filter excess magnesium
• pour the solution into evaporating basin
• and then heat using Bunsen burner
• leave it to crystallize
evaporate or boil off the water
• then decant solution
• finally pat dry using filter paper.
To know more about magnesium chloride, refer
https://brainly.com/question/26227142
#SPJ4
a student dissolves of resveratrol in of a solvent with a density of . the student notices that the volume of the solvent does not change when the resveratrol dissolves in it. calculate the molarity and
The molarity when a student dissolves of resveratrol in of a solvent with a density of . the student notices that the volume of the solvent does not change when the resveratrol dissolves in it is 0.185 M and 0.3645 g
As we know the formula of Resveratrol
C14H12O3
We know the molar mass is 228 g/mol
Mole of resveratol is 19/228=0.083 g
So, the molarity of the Solution is 0.083/0.45=0.185 L
Now as we know molality mole of the solute mass of solvent
volume of solvent = 450 ml
Molality is the mass of solute upon the mass of solvent
M=0.81X450=0.3645 kg
Learn more about molarity at:
https://brainly.com/question/8732513
#SPJ4
fewer steps are required to solve stoichiometry problems when group of answer choices the amount of reactant is given in grams and the product is sought in grams. the amount of reactant is given in moles and the product is sought in moles. the amount reactant is given in grams and the product is sought in liters.
To solve the stoichiometry problems we need the amount of reactants given in mole and the product is sought in mole. We use it because then all we have to do is the mole ratio from the balanced chemical equation to solve the problem
The option B is correct.
What do you mean by Stoichiometry ?
Stoichiometry can be defined as the quantitative relationships or ratios between two or more substances undergoing a physical change or chemical change. Jeremias Benjaim Richter defined stoichiometry in 1792 as the science of measuring quantities or mass ratios of chemical elements. It is the study of mass relations
It can be analyzed by
Balancing equationsConverting between grams and molesCalculating molar massCalculating mole ratiosTo know more about Stoichiometry from the given link
https://brainly.com/question/14935523
#SPJ4
Which is NOT a form of thermal energy transfer?
O conduction
O convection
O spontaneity
O radiation
Answer:
C I think, haven't done this in awhile
Explanation:
I took science
How many moles are in 5.6 x 1023 particles of H2SO4?
0.93 moles are present in 5.6 x 1023 particles of H2SO4
number of moles= given particle/ Avogadro number
number of moles= 5.6 x 1023 particles/6.022×10^23
number of moles=0.93 mol
The mole idea is a useful way to indicate how much of a substance there is. Even one gram of a pure element is known to have an enormous number of atoms when working with particles at the atomic (or molecular) level. The mole idea is frequently applied in this situation. The unit of measurement that receives the most attention is the "mole," which is a count of a sizable number of particles.
Popularly known as the Avogadro constant, the quantity 6.02214076×10^23 is frequently represented by the letter "NA". Atoms, molecules, monoatomic and polyatomic ions, as well as other particles, are examples of the elementary entities that can be represented in moles (such as electrons).
To know more about moles visit : brainly.com/question/15209553
#SPJ1
What happens to the atoms of sugar as it dissolves and then hardens to form rock candy?
What type of particles are represented by the crosses(X)? Helpp please
Answer: The valence shell electrons are represented by crosses.
Explanation:
The outer shell of each atom is drawn as a circle. Electrons from one atom are shown as dots, and electrons from other atoms are shown as crosses. The circles overlap where covalent bonds are present.
For more information on the representation of molecules,
https://brainly.in/question/9030535