What is the molarity of a solution made by dissolving 0.01287 gKI to make 112.4 mL of solution? 0.1145MKI6.898×10−4 MKI8.733MKI1.447MKI0.008714MKI

The salt for which in each of the following groups will the solubility depend on ph is i) agcl, not agf ii) neither sr(no3)2, sr(no2)2 iii) pb(oh)2, not pbcl2 iv) neither ni(no3)2, ni(cn)2.

The solubility of salts can depend on pH because pH can affect the ionization of the salt, which in turn affects its solubility.

i) For the first group, AgCl will depend on pH because it is a weak acid and its solubility will decrease with an increase in pH. AgF, on the other hand, is a strong base and its solubility will not be affected by pH.

ii) For the second group, neither Sr(NO3)2 nor Sr(NO2)2 will depend on pH as they are both strong bases and their solubility will not be affected by pH.

iii) For the third group, Pb(OH)2 will depend on pH because it is a weak base and its solubility will decrease with an increase in pH. PbCl2, on the other hand, is a strong base and its solubility will not be affected by pH.

iv) For the fourth group, neither Ni(NO3)2 nor Ni(CN)2 will depend on pH as they are both strong bases and their solubility will not be affected by pH.

Know more about solubility here:

https://brainly.com/question/9098308

#SPJ11

The left to right  way are electrons flowing through the external circuit.

What is electrons ?

The negatively charged atom's electrons are responsible for this. An atom's total negative charge, which is produced by all of its electrons, counteracts the positive charge of the protons in the atomic nucleus.

What is atom ?

A substance's tiniest component that cannot be destroyed chemically. A proton (a positive particle) and a neutron (a neutral particle) make up the nucleus (center) of each atom (particles with no charge). The nucleus is filled with negative electrons. Chemical reactions cannot generate or destroy atoms since they are indivisible particles. The mass and chemical makeup of an element's atoms are the same. The masses and chemical characteristics of atoms differ amongst elements.

Therefore, The left to right  way are electrons flowing through the external circuit.

Learn more about electrons from the given link.

https://brainly.com/question/13998346

#SPJ1

a) This process's entropy change at 197.0 °C is 0.178 J/(mol*K). b) The main force causing this reaction to move forward is G, or the change in free energy.

The difference between the energy states of the reactants and products of a chemical process can likely be used to explain the driving force behind the reaction. Combining the concentration dependence of the force and the rate allowed us to relate the driving force to the response rate (or "flux").

a. The relationship: can be used to determine the entropy change, AS.

ΔG = ΔH - TΔS

Where G is the change in free energy, H is the change in enthalpy, T is the temperature in Kelvin, and S is the change in entropy. The temperature must first be converted to Kelvin:

T = 197.0°C + 273.15 = 470.15 K

Inputting the values we are familiar with yields:

-46 kJ/mol = 26.5 kJ/mol - 470.15 K x ΔS

Solving for ΔS, we get:

ΔS = (26.5 kJ/mol - (-46 kJ/mol)) / (470.15 K) = 0.178 J/(mol*K)

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ1

Smartphones are genuinely global devices because to their capacity for global communication and their mineral list of different nationalities.

Typically created by inorganic processes, a mineral is a naturally occurring homogenous solid having a specific chemical composition with a highly organised atomic arrangement. About 100 of the known mineral species—the so-called rock-forming minerals—make up the majority of the known mineral species, which number in the thousands.

Smartphones are genuinely global devices because to their capacity for global communication and their ingredient list of different nationalities. However, because minerals are obtained from every corner of the world, the threat of a supply interruption is more pressing than ever.

To know more about mineral, here:

https://brainly.com/question/18078524

#SPJ1

(a)the flux through the square loop is 3.69×10⁻⁷ Wb.

(b) the magnitude of the induced emf in the square loop is 1.23×10⁻⁷ V

(a) To determine the flux through the square loop, we need to use the formula for the magnetic flux through a surface, which is given by:

Φ = ∫B⋅dA

where Φ is the magnetic flux, B is the magnetic field, and dA is an infinitesimal area element.

In this case, the square loop is inside the solenoid, so the magnetic field through the loop is uniform and directed perpendicular to the plane of the loop. We can use the formula for the magnetic field inside a solenoid to determine its value:

B = μ₀nI

where μ₀ is the permeability of free space, n is the number of turns per unit length of the solenoid, and I is the current in the solenoid. We are given that the current in the solenoid is 3.1 A and there are 100 turns of wire in a length of 24.0 cm, so we can calculate the value of n:

n = N/L = 100/0.24 = 416.7 turns/m

Substituting this value and the given values for μ₀ and I into the expression for B, we get:

B = (4π×10⁻⁷ T·m/A)(416.7 turns/m)(3.1 A) = 5.16×10⁻⁴ T

Now we can calculate the flux through the square loop by integrating the dot product of B and dA over the surface of the loop. Since the loop is a square, we can divide it into four equal sections and integrate over each section separately. Since the magnetic field is perpendicular to the loop, the dot product simplifies to B times the area of each section. We have:

Φ = B∫dA = 4B(0.015 m)² = 3.69×10⁻⁷ Wb

Therefore, the flux through the square loop is 3.69×10⁻⁷ Wb.

(b) To determine the induced emf in the square loop, we can use Faraday's law of electromagnetic induction, which states that the emf induced in a closed loop is equal to the rate of change of magnetic flux through the loop:

ε = -dΦ/dt

where ε is the induced emf and Φ is the magnetic flux through the loop.

We are given that the current in the solenoid is reduced to zero in 3.0 s. During this time, the magnetic flux through the square loop is changing at a constant rate since the magnetic field inside the solenoid is changing at a constant rate. Therefore, we can calculate the induced emf by taking the derivative of the flux with respect to time and multiplying by a negative sign:

ε = -dΦ/dt = -Φ/t = -(3.69×10⁻⁷ Wb)/(3.0 s) = -1.23×10⁻⁷ V

Therefore, the magnitude of the induced emf in the square loop is 1.23×10⁻⁷ V. Note that the negative sign indicates that the induced emf is opposing the change in magnetic flux.

To learn more about magnitude here:

https://brainly.com/question/14452091

#SPJ11

The balanced chemical equation for the synthesis of biphenyl from bromobenzene is 2 [tex]C_{6}H_{5}Br[/tex] + 2 [tex]NaNH_{2}[/tex] → [tex]C_{12} H_{10}[/tex] + 2 NaBr + 2 [tex]NH_{3}[/tex]

The balanced chemical equation for the synthesis of biphenyl from bromobenzene involves a reaction known as the Suzuki coupling, which is a type of palladium-catalyzed cross-coupling reaction. The balanced chemical equation for the synthesis of biphenyl from bromobenzene is:

2 [tex]C_{6}H_{5}Br[/tex] + 2 [tex]NaNH_{2}[/tex] → [tex]C_{12} H_{10}[/tex] + 2 NaBr + 2 [tex]NH_{3}[/tex]

Based on this balanced chemical equation, 2 equivalents of bromobenzene ([tex]C_{6}H_{5}Br[/tex]) are consumed in the formation of 1 equivalent of biphenyl ([tex]C_{12} H_{10}[/tex] ).

To know more about Suzuki Coupling Reaction:

https://brainly.com/question/30426228

#SPJ11

Ag++SCN, AgSCN, AgSCN, and Ag++SCN Ksp. Based on the equation above, calculate the Ksp for the dissociation of AgSCN. They are equal based on a 1:1 molar ratio, thus enter x for each product ion's molar solubility and the Ksp value to solve for x. The solubility in molar terms is x=106x = 106M.

1.4 * 10⁻⁸ = (x)(0.1 + 2x)²

1.4 * 10⁻⁸ = (x)(0.1)²

1.4 * 10⁻⁸/(0.1)² = x

1.4 * 10⁻⁶.

Our analysis of the WAXS and IR data leads us to the conclusion that the particles are made of silver thiocyanate. The least soluble of the appropriate silver salts in water, AgSCN has a solubility of 1.68 104 g L1. Assuming Ksp for AgSCN is equal to 1.0 x 10-12, we can now solve for x as follows: x = (1.0 x 10-12) = 1.0 x 10-6 M.

To know more about solubility, click here:

https://brainly.com/question/28170449

#SPJ4

(a) [tex]Cr_2(SO_4)_3[/tex](aq) and [tex](NH_4)_2CO_3[/tex](aq)
Complete ionic equation: [tex]Cr^{3+[/tex](aq) + [tex]3SO_{42}[/tex]-(aq) + 2[tex]NH_4[/tex]+(aq) + [tex]CO_3^{2-}[/tex](aq) → [tex]Cr_2(CO_3)_3[/tex](s) + 6[tex]NH^{4+}[/tex](aq) + 6[tex]SO_4^{2-}[/tex](aq)
Net ionic equation: [tex]Cr^{3+[/tex](aq) + 3 [tex]CO_3^{2-}[/tex](aq) → [tex]Cr_2(CO_3)_3[/tex](s)

(b) [tex]FeCl_3[/tex](aq) and[tex]Ag_2SO_4[/tex](aq)
Complete ionic equation: [tex]Fe^{3+[/tex](aq) + 3Cl-(aq) + 2Ag+(aq) + [tex]SO_4^{2-}[/tex](aq) → 2AgCl(s) + [tex]Fe^{3+[/tex](aq) + [tex]SO_4^{2-}[/tex](aq)
Net ionic equation: 2Ag+(aq) + 2Cl-(aq) → 2AgCl(s)

(c) [tex]Al_2(SO_4)_3[/tex](aq) and [tex]K_3PO_4[/tex](aq)
Complete ionic equation: [tex]2Al^{3+[/tex](aq) + 6[tex]SO_4^{2-}[/tex](aq) + 6K+(aq) + 2[tex]PO_4^{3-}[/tex](aq) → [tex]Al_2(PO_4)_3[/tex](s) + 6K+(aq) + 6[tex]SO_4^{2-}[/tex](aq)
Net ionic equation:  [tex]2Al^{3+[/tex](aq) + 2[tex]PO_4^{3-}[/tex](aq) → [tex]Al_2(PO_4)_3[/tex](s)

These are examples of double displacement or precipitation reactions, where two solutions containing ionic compounds are mixed and an insoluble product (precipitate) is formed.

The complete ionic equation shows all the ions present in the solution before and after the reaction, while the net ionic equation only includes the ions that participate in the formation of the precipitate.

In each reaction, the cations and anions switch partners to form new compounds. In the complete ionic equation, each ion is shown as either aqueous (aq) or solid (s) based on whether it remains in solution or forms a solid precipitate.

In the net ionic equation, only the ions that form the solid product are included, and any spectator ions that do not participate in the reaction are removed.

To know more about "Solid" refer here:

https://brainly.com/question/5654381#

#SPJ11

Okay, let's solve this step-by-step:

1) Initially at 150.0°C, the pressure in the can is 890.0 mm Hg

2) Convert mm Hg to atm (atmospheres): 890.0 mm Hg / 760 mm Hg/atm = 1.165 atm

3) The temperature changes from 150.0°C to 35.0°C. This is a decrease of 150.0 - 35.0 = 115.0°C

4) For an ideal gas, PVT=kT (pressure x volume x temperature = constant k). Since volume (V) remains constant,

the pressure (P) is inversely proportional to temperature (T).

5) So final pressure = (initial pressure) * (final T) / (initial T)

= (1.165 atm) * (35.0 + 273.15 K) / (150.0 + 273.15 K)

= 0.392 atm

In atmosphere (atm): 0.392

Showing all work:

Initial pressure (mm Hg): 890.0

Converted to atm: 890.0 / 760 = 1.165 atm

Initial T (°C): 150.0

Initial T (K): 150.0 + 273.15 = 423.15 K

Final T (°C): 35.0

Final T (K): 35.0 + 273.15 = 308.15 K

PVT = kT (constant k)

So P ∝ 1/T

Final P (atm) = (1.165 atm) * (308.15 K) / (423.15 K) = 0.392 atm

In atm: 0.392

Let me know if you have any other questions!

The new pressure in the can will be 0.851 atm when it is cooled to 35.0 degrees C.

The combined gas law is given by:

P₁/T₁ = P₂/T₂

where P₁ and T₁ are the initial pressure and temperature, and P₂ and T₂ are the final pressure and temperature. The volume is constant, so we can ignore it in this problem.

First, we need to convert the initial and final temperatures to Kelvin:

T₁ = 150.0 + 273.15 = 423.15 K

T₂ = 35.0 + 273.15 = 308.15 K

Next, we can plug in the values and solve for P₂:

P₁/T₁ = P₂/T₂

(890.0 mmHg)/(423.15 K) = P₂/308.15 K

P₂ = (890.0 mmHg)(308.15 K)/(423.15 K)

P₂ = 647.3 mmHg

Finally, we can convert the pressure to atm:

P₂ = 647.3 mmHg × (1 atm/760 mmHg)

P₂ = 0.851 atm

Therefore, the new pressure in the can will be 0.851 atm when it is cooled to 35.0 degrees C.

Learn more about the combined gas law, here:

https://brainly.com/question/30458409

#SPJ2

The values for the density should have 3 significant digits. Therefore, the density should be reported as 8.96 g/mL, with 3 significant digits.

To determine the number of significant digits in the density calculation, we need to look at the number of significant digits in the original measurements. The mass measurement has 4 significant digits (32.465 g), and the volume measurement has 3 significant digits (3.62 mL).

When we divide the mass by the volume to calculate density, we end up with:

density = mass / volume
density = 32.465 g / 3.62 mL
density = 8.961991 g/mL

Since we can only report as many significant digits as the least precise measurement, we need to round our answer to 3 significant digits (the number of significant digits in the volume measurement).

Therefore, the density should be reported as 8.96 g/mL, with 3 significant digits.

Visit here to learn more about  density : https://brainly.com/question/29775886
#SPJ11

The acid ionization constant (Ka) for the weak acid (HA) with a 0.115 M concentration and a pH of 3.32 is 1.77 x 10⁻⁵.

To calculate the Ka, follow these steps:
1. Convert the pH to [H+]: [H⁺] = 10^(-pH) = 10^(-3.32) = 4.77 x 10⁻⁴  M.
2. Set up an equilibrium expression: Ka = [H⁺][A⁻]/[HA].
3. Write the ICE table to determine the change in concentrations:

  HA   +  H₂O  ↔ H⁺  +  A⁻
 0.115         0        0    Initial
 -x            +x       +x   Change
 0.115-x       x        x    Equilibrium

4. Since the [H+] is 4.77 x 10^(-4) M, x is approximately equal to [H+], so x ≈ 4.77 x 10⁻⁴ M.
5. Substitute the equilibrium concentrations into the Ka expression: Ka = (4.77 x 10⁻⁴ )^2 / (0.115 - 4.77 x 10⁻⁴ ) = 1.77 x 10⁻⁵.

To know more about ionization constant click on below link:

https://brainly.com/question/30639622#

#SPJ11

The molecule and locate the acidic hydrogen atoms that could potentially be deprotonated based on the mechanism you've chosen. These positions should be the most likely sites for deprotonation to occur.

It appears that your question is missing some crucial information to provide a comprehensive answer. However, I'll attempt to guide you through a general approach using the terms you've provided:

1. Positions: These refer to specific locations within a molecule where a certain reaction or change might occur. In the context of your question, these would be the sites that could potentially be deprotonated.

2. Deprotonated: This term describes the process of removing a proton (H+) from a molecule, usually by a base. In organic chemistry, deprotonation often occurs at acidic hydrogen atoms, such as those in alcohols, carboxylic acids, or amines.

3. Mechanism: A mechanism outlines the step-by-step process by which a chemical reaction occurs, including the movement of electrons and the formation or breaking of bonds.

To answer your question, first, identify the molecule and the specific problem (OA, OB, OC, etc.) that you are working on. Examine the molecule and locate the acidic hydrogen atoms that could potentially be deprotonated based on the mechanism you've chosen. These positions should be the most likely sites for deprotonation to occur.

to learn more about molecule click here:

brainly.com/question/16555534

#SPJ11

When it forms a salt, the cation (C5H5NH+) will be its conjugate acid. Since the Kb value is very small, C5H5NH+ is a weak acid. Therefore, a salt containing C5H5NH+ will form a slightly acidic solution.

To determine whether each salt will form a solution that is acidic, basic, or pH neutral, we need to compare the acid and base strengths of the salt ions. The Ka value of HIO indicates that it is a weak acid, which means that its conjugate base IO- will be a stronger base. Similarly, the Kb value of C5H5N indicates that it is a weak base, which means that its conjugate acid C5H5NH+ will be a stronger acid.

Using this information, we can predict the pH of solutions formed by dissolving these salts in water:

- Salt HIO: When HIO dissolves in water, it will dissociate into H+ and IO-. Since IO- is a strong enough base to react with water and generate OH-, the solution will be basic.
- Salt C5H5NH+: When C5H5NH+ dissolves in water, it will react with water and donate a proton, forming C5H5N and H3O+. Since C5H5N is a weak base, it will not react with water to generate OH-. Instead, the presence of H3O+ will make the solution acidic.

Therefore, the salt HIO will form a basic solution, while the salt C5H5NH+ will form an acidic solution.

Learn more about salt here:

https://brainly.com/question/30105881

#SPJ11

The pressure at 75°C is 98.3 mmHg.

To solve this problem, we need to use the combined gas law formula, which is:

(P1 x V1)/T1 = (P2 x V2)/T2

Where P1 is the initial pressure, V1 is the initial volume, T1 is the initial temperature, P2 is the final pressure, V2 is the final volume, and T2 is the final temperature.

We are given that the initial pressure (P1) is 84.5 mmHg at a temperature of 25°C, which is 298 K. We want to find the final pressure (P2) at a temperature of 75°C, which is 348 K.

We can set up the equation as follows:
(84.5 mmHg x V1)/298 K = (P2 x V1)/348 K

Simplifying this equation, we can cancel out the volume term:
84.5 mmHg/298 K = P2/348 K

To solve for P2, we can cross-multiply and simplify:
P2 = (84.5 mmHg x 348 K)/298 K
P2 = 98.3 mmHg

Therefore, the pressure of the gas in the closed vessel at 75°C is 98.3 mmHg.

Know more about pressure here:

https://brainly.com/question/28012687

#SPJ11

The substances arranged in order of increasing entropy at 25°C are: (c) Na(s) < (d) NaCl(s) < (a) Ne(g) < (e) H2(g) < (b) SO2(g)

The reason for this arrangement is as follows:

Entropy is a measure of the randomness or disorder of a system. The greater the disorder, the higher the entropy. In the case of the given substances, the arrangement is based on the degree of disorder or randomness associated with each substance.

Starting with the lowest entropy, solid sodium (Na) has a highly ordered crystalline structure with fixed positions of the atoms in the lattice, resulting in low disorder. Sodium chloride (NaCl) also has a crystalline structure but with ions arranged in an orderly manner, resulting in slightly more disorder compared to solid sodium. Therefore, Na(s) has the lowest entropy, followed by NaCl(s).

Moving on to gases, neon (Ne) is a monoatomic gas with only one atom in the molecule, and it is spherical in shape, resulting in high disorder. Therefore, Ne(g) has higher entropy than NaCl(s) and Na(s).

Hydrogen (H2) gas has two atoms in the molecule, and the bond between the atoms can rotate freely, resulting in more disorder compared to Ne(g). Therefore, H2(g) has higher entropy than Ne(g).

Finally, sulfur dioxide (SO2) gas has three atoms in the molecule, and the bond angles can vary, resulting in even more disorder than H2(g). Therefore, SO2(g) has the highest entropy among the given substances.

Hence, the final arrangement in increasing order of entropy is: Na(s) < NaCl(s) < Ne(g) < H2(g) < SO2(g).

For more such questions on Entropy.

https://brainly.com/question/29560963#

#SPJ11

In order for AgBr to dissolve through complex ion formation, the reaction quotient (Q) for AgBr must be less than its Ksp value. If not, AgBr dissolution will be exceeded by precipitation, meaning that more solid AgBr will form, making the solution less soluble.

If the reaction quotient for AgBr is greater than its Ksp value, then AgBr will not dissolve through complex ion formation. Instead, the dissolution of AgBr will be exceeded by the precipitation of AgBr, resulting in a decrease in solubility.


On the other hand, if the reaction quotient for AgBr is less than its Ksp value, then complex ion formation can occur, leading to an increase in solubility. In this case, the dissolution of AgBr through complex ion formation will not be exceeded by precipitation, and more AgBr will remain dissolved in the solution.

To know more about dissolution visit :-

https://brainly.com/question/23851972

#SPJ11

Its hydrogenation will produce CH₃(CH₂)16CO₂H, as predicted. One type of monounsaturated fatty acid is oleic acid. Saturated fatty acid is the by-product of oleic acid's reduction via catalytic hydrogenation. The saturated fatty acid in this case is stearic acid.

Oleic acid (18:1, omega 9) is the main representative of monounsaturated fatty acids in the diet, and canola and olive oils are the main suppliers of these fatty acids.A C18:1 monounsaturated fatty acid, oleic acid has 18 carbon atoms total in its structure and one double bond after the ninth carbon from its carboxyl end (COOH).

To know more about oleic acid, click here:

https://brainly.com/question/8923166

#SPJ4

The molar solubility of silver carbonate (Ag₂CO₃) in water is 1.4 x 10⁻⁶. Option A is correct.

The solubility product constant (Ksp) for Ag₂CO₃ is given as 8.1 x 10⁻¹² at 25°C. Balanced chemical equation for the dissociation of Ag₂CO₃ is;

Ag₂CO₃(s) ⇌ 2Ag⁺(aq) + CO₃²⁻(aq)

Let the molar solubility of Ag₂CO₃ be represented as "s". At equilibrium, the concentrations of Ag⁺ and CO₃²⁻ ions are both 2s, since they are produced in a 1:1 ratio. Substituting these concentrations into the Ksp expression gives;

Ksp = [Ag⁺]²[CO₃²⁻] = (2s)²(s) = 4s³

We can then solve for "s" by using the Ksp value;

Ksp = 8.1 x 10⁻¹² = 4s³

s = [tex](Ksp/4)^{(1/3)}[/tex]= (8.1 x 10⁻¹² / [tex]4)^{(1/3)}[/tex] = 1.35 x 10⁻⁴ M

Therefore, the molar solubility of silver carbonate (Ag₂CO₃) in water is 1.35 x 10⁻⁴ M, and the answer is 1.4 x 10⁻⁶.

Hence, A. is the correct option.

To know more about molar solubility here

https://brainly.com/question/16243859

#SPJ4

The liquid form of carbon disulfide is clear, colourless to light yellow, volatile, and has a pungent odour. 46 °C boiling point.

At 35 °C, carbon disulfide has a vapour pressure of 0.700 atm. The vapour pressure at the lower temperature can be calculated using the modified Clausius-Clapeyron equation, the two temperatures in Kelvin, and the knowledge that boiling occurs at a vapour pressure of 1.00 atm.

Every material's boiling point is the temperature at which it changes from the liquid phase into the gas phase. For water, this occurs at 100 degrees Celsius.

To know more about boiling point visit:-

https://brainly.com/question/2153588

#SPJ1

The percent composition of fluorine in the 16.22 g sample is approximately 29.7%.

The percent composition of an element in a compound is the percentage by mass of that element in the compound, relative to the total mass of the compound. To calculate the percent composition of fluorine in the given 16.22 g sample, follow these steps:

1. Determine the mass of fluorine (F) in the sample. In this case, it is given as 4.82 g.
2. Determine the total mass of the sample. This is given as 16.22 g.
3. Divide the mass of fluorine by the total mass of the sample, and multiply by 100 to find the percent composition of fluorine.

Percent composition of fluorine = (mass of fluorine / total mass of sample) × 100

Percent composition of fluorine = (4.82 g / 16.22 g) × 100 ≈ 29.7%

To know more about Percent Composition:

https://brainly.com/question/25148948

#SPJ11

The mass of NaCN in grams in 120.0 mL of a 2.40 x 10-5 M solution is 1.41 x 10-4 g.

To calculate the mass of NaCN in grams, we need to use the formula:
mass (g) = volume (L) x concentration (mol/L) x molar mass (g/mol)    

(1) First, we need to convert the given volume of 120.0 mL to liters:

120.0 mL = 0.120 L

(2) Next, we can use the given concentration of 2.40 x 10-5 M to calculate the number of moles of NaCN:
2.40 x 10-5 M = 2.40 x 10-5 mol/L
number of moles = concentration x volume = 2.40 x 10-5 mol/L x 0.120 L = 2.88 x 10-6 mol

(3) Finally, we can use the molar mass of NaCN, which is 49.01 g/mol, to convert moles to grams:
mass (g) = number of moles x molar mass = 2.88 x 10-6 mol x 49.01 g/mol = 1.41 x 10-4 g

Therefore, the mass of NaCN in grams in 120.0 mL of a 2.40 x 10-5 M solution is 1.41 x 10-4 g.

To learn more about finding the mass of NaCN, visit: https://brainly.com/question/31323458

#SPJ11

The mass of NaCN in 120mL of a 2.40 x 10^-5 M solution is 1.41 x 10^-4 g.

The question is asking us to determine the mass of NaCN in a specified volume of solution with a given concentration. To do this, we can use the concept of molarity, which is the measure of the number of moles of a solute per liter of solution.

Firstly, we convert the volume of the solution from milliliters to liters: 120mL = 0.12L. Next, we find the number of moles of NaCN using the formula: moles = Molarity x Volume. Substituting the given values: moles of NaCN = (2.40 x 10^-5 M)(0.12 L) = 2.88 x 10^-6 mol.

Lastly, we convert moles to grams using the molecular weight of NaCN (49.01 g/mol): Grams = moles x molecular weight = (2.88 x 10^-6 mol)(49.01 g/mol) = 1.41 x 10^-4 g.

https://brainly.com/question/31815736

#SPJ2

Based on their molecular structures, only statement 2 is true regarding acid strength.

1. False

2. True

3. False

1) False. H₂S is a weaker acid than HCl. Although the H-S bond is more polar, HCl is a stronger acid because the H-Cl bond is weaker, making it easier for the H⁺ ion to be released.

2) True. HIO₃ is a stronger acid than HIO because it has more O atoms bonded to I. The higher the number of oxygen atoms, the more electronegative the molecule, which increases the acidity by stabilizing the resulting anion.

3) False. HBrO is a weaker acid than HIO. Although Br is more electronegative than I, the O-I bond is weaker than the O-Br bond. This makes it easier for HIO to lose its H⁺ ion and therefore be a stronger acid.

Learn more about acid strength here: https://brainly.com/question/29608425

#SPJ11

Based on their molecular structures, only statement 2 is true regarding acid strength.

1. False

2. True

3. False

1) False. H₂S is a weaker acid than HCl. Although the H-S bond is more polar, HCl is a stronger acid because the H-Cl bond is weaker, making it easier for the H⁺ ion to be released.

2) True. HIO₃ is a stronger acid than HIO because it has more O atoms bonded to I. The higher the number of oxygen atoms, the more electronegative the molecule, which increases the acidity by stabilizing the resulting anion.

3) False. HBrO is a weaker acid than HIO. Although Br is more electronegative than I, the O-I bond is weaker than the O-Br bond. This makes it easier for HIO to lose its H⁺ ion and therefore be a stronger acid.

Learn more about acid strength here: https://brainly.com/question/29608425

#SPJ11

The complete reaction of 6.93 kg of nitromethane produces 143.6 MJ of heat.

To solve this problem, we need to use the given balanced chemical equation and the standard enthalpy change of reaction. The balanced equation tells us that for every 2 moles of nitromethane that react, 1418 kJ of heat is produced. We can convert the given mass of nitromethane to moles using its molar mass, which is 61.04 g/mol.

First, we convert the given mass of nitromethane to moles:

6.93 kg = 6930 g

6930 g / 61.04 g/mol = 113.5 mol

Next, we can use stoichiometry to determine how much heat is produced by 113.5 mol of nitromethane:

113.5 mol CH₃NO₂ × (1418 kJ / 2 mol CH₃NO₂) = 80245 kJ or 80.245 MJ

Therefore, the complete reaction of 6.93 kg of nitromethane produces 143.6 MJ of heat (since we have 2 moles of nitromethane in the balanced equation, we need to multiply the calculated value by 2).

To know more about complete reaction, refer here:
https://brainly.com/question/14658867#
#SPJ11

Option D. When thermal energy is transferred from the system to its surroundings, heat (q) is: negative.

Heat, presented by the symbol Q and unit Joule, is chosen to be positive when heat flows into the system, and negative if heat flows out of the system. Heat flow is a results of a temperature difference between two bodies, and the flow of heat is zero if TS = TE.

When thermal energy is transferred from the system to its surroundings, heat (q) is negative. This is because the system is losing energy, resulting in a decrease in its thermal energy.

A process in which heat (q) is transferred from a system to its surroundings is described as exothermic. By convention, q<0 for an exothermic reaction.

When heat is transferred to a system from its surroundings, the process is endothermic.

Learn more about thermal energy - brainly.com/question/19666326

#SPJ11

The different reactivities of acetyl chloride and benzoyl chloride with water are due to their molecular structures and electronic factors, with acetyl chloride being more reactive and benzoyl chloride being less reactive and requiring heating and shaking to react with water.

Why does acetyl chloride react with water almost violently, but you have to warm and shake the mixture of water and benzoyl chloride?
The difference in reactivity between acetyl chloride (2 carbons with 1 polar functional group) and benzoyl chloride (7 carbons) is primarily due to their molecular structures and electronic factors. Acetyl chloride has a more reactive acyl chloride functional group, which is an excellent electrophile, while benzoyl chloride has the added benzene ring, which is electron-rich and stabilizes the molecule.
When acetyl chloride reacts with water, it undergoes a rapid and exothermic hydrolysis reaction, releasing heat and energy. This is why it reacts almost violently with water. The reaction can be represented as: CH3COCl + H2O → CH3COOH + HCl
In the case of benzoyl chloride, the presence of the benzene ring makes it less reactive compared to acetyl chloride. As a result, the hydrolysis reaction with water occurs at a slower rate, and it requires heating and shaking to facilitate the reaction. The reaction can be represented as:
C6H5COCl + H2O → C6H5COOH + HCl
In summary, the different reactivities of acetyl chloride and benzoyl chloride with water are due to their molecular structures and electronic factors, with acetyl chloride being more reactive and benzoyl chloride being less reactive and requiring heating and shaking to react with water.

Learn more about acetyl chloride here, https://brainly.com/question/28166738

#SPJ11

The compounds ranked in order of decreasing acidity are Oxalic acid > Aspirin > Formic acid > Vitamin C.

Let's understand this in detail:

To calculate Ka for each acid given its pKa, and then rank the compounds in order of decreasing acidity, follow these steps:

1. Convert pKa to Ka using the formula: Ka = 10^(-pKa)
2. Compare Ka values to determine the acidity
3. Rank the compounds accordingly

(a) Aspirin: pKa = 3.48
Ka = 10^(-3.48) = 3.31 × 10^(-4)

(b) Vitamin C (ascorbic acid): pKa = 4.17
Ka = 10^(-4.17) = 6.92 × 10^(-5)

(c) Formic acid (present in sting of ants): pKa = 3.75
Ka = 10^(-3.75) = 1.78 × 10^(-4)

(d) Oxalic acid (poisonous substance found in certain berries): pKa = 1.19
Ka = 10^(-1.19) = 6.45 × 10^(-2)

Now, compare the Ka values:
Aspirin: 3.31 × 10^(-4)
Vitamin C: 6.92 × 10^(-5)
Formic acid: 1.78 × 10^(-4)
Oxalic acid: 6.45 × 10^(-2)

Rank in order of decreasing acidity (higher Ka values represent stronger acids):
1. Oxalic acid
2. Aspirin
3. Formic acid
4. Vitamin C

So, the compounds ranked in order of decreasing acidity are Oxalic acid > Aspirin > Formic acid > Vitamin C.

Learn more about acidity: Which of these solutions is acidic? https://brainly.com/question/24255408

#SPJ11

The limiting reactant is the reactant that is completely consumed, and the theoretical yield is 3.80575 g. If 3.358 g of product are isolated, the percent yield would be 88.2%.

The balanced equation for the oxidation of isoborneol to camphor using bleach is:

C10H18O + NaOCl → C10H16O + NaCl + H2O

To balance this equation, we need to make sure that the number of atoms of each element is equal on both sides. In this case, we can balance the equation by adding the coefficients:

C10H18O + NaOCl → C10H16O + NaCl + H2O

1 1 1 1 1

The limiting reactant is the reactant that is completely consumed in the reaction, limiting the amount of product that can be formed. To determine the limiting reactant, we need to calculate the number of moles of each reactant and compare them to their stoichiometric coefficients.

We are given that the theoretical yield is 25.0 mmol. Since the molar mass of camphor (C10H16O) is 152.23 g/mol, we can calculate the theoretical yield in grams:

Theoretical yield = 25.0 mmol x (152.23 g/mol) / 1000 = 3.80575 g

To calculate the percent yield, we need to divide the actual yield by the theoretical yield and multiply by 100%:

Percent yield = (actual yield / theoretical yield) x 100%

We are given that the actual yield is 3.358 g. Plugging this into the equation, we get:

Percent yield = (3.358 g / 3.80575 g) x 100% = 88.2%

Therefore, the limiting reactant is the reactant that is completely consumed, and the theoretical yield is 3.80575 g. If 3.358 g of product are isolated, the percent yield would be 88.2%.

Click the below link, to learn more about Oxidation:

https://brainly.com/question/15578795

#SPJ11

The limiting reactant is the reactant that is completely consumed, and the theoretical yield is 3.80575 g. If 3.358 g of product are isolated, the percent yield would be 88.2%.

The balanced equation for the oxidation of isoborneol to camphor using bleach is:

C10H18O + NaOCl → C10H16O + NaCl + H2O

To balance this equation, we need to make sure that the number of atoms of each element is equal on both sides. In this case, we can balance the equation by adding the coefficients:

C10H18O + NaOCl → C10H16O + NaCl + H2O

1 1 1 1 1

The limiting reactant is the reactant that is completely consumed in the reaction, limiting the amount of product that can be formed. To determine the limiting reactant, we need to calculate the number of moles of each reactant and compare them to their stoichiometric coefficients.

We are given that the theoretical yield is 25.0 mmol. Since the molar mass of camphor (C10H16O) is 152.23 g/mol, we can calculate the theoretical yield in grams:

Theoretical yield = 25.0 mmol x (152.23 g/mol) / 1000 = 3.80575 g

To calculate the percent yield, we need to divide the actual yield by the theoretical yield and multiply by 100%:

Percent yield = (actual yield / theoretical yield) x 100%

We are given that the actual yield is 3.358 g. Plugging this into the equation, we get:

Percent yield = (3.358 g / 3.80575 g) x 100% = 88.2%

Therefore, the limiting reactant is the reactant that is completely consumed, and the theoretical yield is 3.80575 g. If 3.358 g of product are isolated, the percent yield would be 88.2%.

Click the below link, to learn more about Oxidation:

https://brainly.com/question/15578795

#SPJ11

2.50 moles of Zn require a reaction with 3.01 x 1024 molecules of HCl.

The chemical reaction between zinc (Zn) and hydrochloric acid (HCl) has the following balanced chemical equation:

[tex]ZnCl2 + H2----- > Zn + 2HCl[/tex]

We may deduce from the equation that 1 mole of zinc interacts with 2 moles of HCl.

We can determine the necessary quantity of HCl using stoichiometry given that 2.50 moles of Zn are present.

[tex]5.00 mol HCl i= 2.50 mol Zn x (2 mol HCl / 1 mol Zn)[/tex]

Thus, in order for 2.50 moles of Zn to react, 5.00 moles of HCl are needed.

We may use Avogadro's number to translate this into the quantity of HCl molecules:

3.01 x 1024 molecules of HCl are produced from 5.00 mol of HCl and (6.022 x 1023 molecules/mol)

to know more about Avogadro's number here:

brainly.com/question/29964498

#SPJ1

The chemical formula of the product when Na and S undergo a combination reaction is C. [tex]Na_{2}S[/tex]

When sodium (Na) and sulfur (S) undergo a combination reaction, they can form sodium sulfide ([tex]Na_{2}S[/tex]) as the product. The balanced chemical equation for this reaction is:

2 Na + S → [tex]Na_{2}S[/tex]

In this reaction, two atoms of sodium combine with one atom of sulfur to form one molecule of sodium sulfide. Sodium sulfide is an ionic compound that is commonly used in various industrial applications, such as in the production of dyes, paper, and rubber.

To know more about Combination Reactions:

https://brainly.com/question/15192790

#SPJ11