what is the capaceter

Answers

Answer 1

Answer:

capacitor, device for storing electrical energy, consisting of two conductors in close proximity and insulated from each other. A simple example of such a storage device is the parallel-plate capacitor.

Explanation:

Hope it's help

please brainless me :)

Answer 2
Firstly, it is capacitor not capaceter.Capacitor is an electrical instrument which is used to store electrical charge and it may also releases the charge into a circuit.

Hope you could get an idea from here.

Doubt clarification - use comment section.


Related Questions

in any chemical reaction or physical change the mass of the product is ___ The mass of the reactant
a. The relationship cannot be determined by the amount of information given
b. equal to or the same
c. twice is greater than
d. twice as less than

Answers

Answer: b. equal to or the same

In Law of Conservation of mass,  the mass of the product equals the mass of the reactant. A reactant is the chemical reaction of two or more elements to make a new substance, and a product is the substance that is formed as the result of a chemical reaction.

pls mark brainliest! i really need one :(

How many kilojoules are in 1,967,256J? Round your answer to the nearest whole number.

Answers

Answer:

1,967 kilojoules.

Explanation:

1 kilo = a thousand.

There are 1.967 kilojoules in 1,967,256 joules.

What is law of energy conservation?Energy can neither be created nor destroyed.It is only get transfered from one form to another form.

What is the SI unit of energy?Joule is a SI unit of energy.There are 1000 joules in 1 kilojoules .

learn more about unit of energy here - https://brainly.com/question/3012083

#SPJ2

a narrow slit is illuminated with sodium yellow light of wavelength 589 nm. if the central maximum extends to ±30.0°, how wide is the slit?

Answers

Answer:

because of the gravity of the earth

Which of the balls will exert the smallest force on object A?Why

Answers

The 1kg ball would exert the smallest force.

As force = mass x gravity, this means that the smaller the mass (kg), the lesser the force.

When the mass is lighter (1kg):

Force = mass x gravity
Force = 1 x 9.8
Force = 9.8N

Compared to when the mass is heavier (10kg)

Force = mass x gravity
Force = 10 x 9.8
Force = 98N

Where this proves that the lighter the mass, the smaller the force exerted.

a 280 nm thin film with index of refraction 1.6 floats on waterwhat is the largest wavelength of reflected light for which constructive interference occur? answer in units of m.

Answers

Answer:

Inside the film the wavelength will be λ/n

For constructive interference to occur the film must be λf/4 thick where λf is the wavelength of the light in the film - there will be a 180 degree phase shift at the water/film interface since the index of refraction of the film is greater than that of water - and the light has to travel λ/2 inside the film for constructive interference to occur

280 nm / 1.6 * 4 = 700 nm is the greatest wavelength allowed

Note that 700 nm is also the upper wavelength of the visible spectrum

Why is kinetic energy lost in an inelastic collision?

Answers

Answer:

This is because some kinetic energy had been transferred to something else.

Explanation:

An inelastic collision is a collision in which there is a loss of kinetic energy. While momentum of the system is conserved in an inelastic collision, kinetic energy is not.

What is the net force on a car with a mass of 1000 kg if its
acceleration is 35 m/s^2?

Answers

Answer:

3000N

Explanation:

divided to get answer

the force needed to accelerate the 1000kg car by 3m/s2 is 3000N

What is the monthly cost of using a 750 W refrigerator that runs for 8 hours every day, if the cost per kWh is $0.23?

Answers

Answer:

Assuming there are 28 days in each month,

750W = 0.75kW

Cost of electric bill = 0.75 × 8 × 28 × $0.23

                               = $38.64

practical examples of radition​

Answers

Basically anything thats hot like the sun,microwave,fire,ect.

hi i need some help with this.....

Answers

Answer: D

Explanation: moogle helps lol.

the answer is C

Explanation:

In a plant cell, chloroplast makes sugar during the process of photosynthesis converting light energy into chemical energy stored in glucose. In mitochondria, through the process of cellular respiration breaks down sugar into energy that plant cells can use to live and grow.

A box slides across a rough surface, eventually coming to rest.
Part A
a. Use the work-energy principle (Khan Academy:Work and the work-Energy Principle and the definition of work to explain why the box comes to rest.

b. Explain how the motion of the box is consistent with the Law of Conservation of Energy.

Answers

Answer:

he was a random act like you to be the first time I see is a great day and night to get a very happy to see you soon I hope that the world is not the same thing to say about this

a) When a box slides across a rough surface, eventually coming to rest, its kinetic energy is used during work done against frictional resistance force.

b) This work done is stored in the box as a potential energy. Thus the motion of the box is consistent with the Law of Conservation of Energy.

What is  work-Energy Principle?

According to the work-energy theorem, the work done by the net force acting on a body equals the change in kinetic energy.

It can simply be written as:

Work done = initial kinetic energy - final kinetic energy

The work energy theorem equation is the one presented above.

Now when a box slides across a rough surface, eventually coming to rest, frictional force comes into play. This force is opposite to the direction of motion of the box. Hence, the kinetic energy of the box is used during work done against frictional resistance force and stored in the box as a potential energy and thus  Law of Conservation of Energy followed.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ2

HEELPPPP!! A train travels 195 kilometers in 4.0 hours, and then 125 kilometers in 3.0 hours. What is its average speed?

Answers

Answer:

Train A has a speed 20 miles per hour greater than that of train B. If train A travels 300 miles in the same times train B travels 220 miles, what are the speeds of the two trains?

2. A woman has a total of $13,000 to invest. She invests part of the money in an account that pays 11% per year and the rest in an account that pays 12% per year. If the interest earned in the first year is $1490 how much did she invest in each account?

Explanation:

how do you find average velocity (vaverage) from acceleration (a) and time (t)?

Answers

Answer:

1) Average velocities:

Given the magnitudes of 2 velocity vectors, in different time instants, the average velocity is defined as the difference of the 2 velocity magnitudes, in absolute value, divided by the interval of time occuring between the measurement of the velocity magnitudes.

2) Average acceleration

Given the magnitudes of 2 acceleration vectors, in different time instants, the average acceleration is defined as the difference of the 2 acceleration magnitudes, in absolute value, divided by the interval of time occuring between the measurement of the acceleration magnitudes.

As you see the definitions are pretty similar.

Note: I didn't copy-paste this answers from any other site.

Describe the direction in which each object will accelerate. If the object won't accelerate, write "no acceleration." Explain what might be happening to each object in terms of its overall motion.

Answers

Answer:

No acceleration. All of the forces are acting equally on the paper air plane therfore It isn't going to move any where.

A 570 kg elevator accelerates downwards at 1.5 m/s2 for the first 13 m of its motion.
Part A
How much work is done during this part of its motion by the cable that lowering the elevator? Neglect any friction or air resistance.

Answers

Mass of the elevator (m) = 570 KgAcceleration = 1.5 m/s^2Distance (s) = 13 mLet the force be F.We know, F = ma,Therefore, F = (570 × 1.5) N = 855 NAngle between distance and force (θ) = 0°We know, work done = F s Cos θTherefore, work done by the cable during this part = (855 × 13 × Cos 0°) J= (855 × 13 × 1) J= 11115 J

Answer:

11115 J

Hope you could get an idea from here.

Doubt clarification - use comment section.

Guys No one's answering my question so sad! Once again I'm asking the same question –Here


Chapter Name :- Vector

Question :- A car is moving at Vc speed. Rain is falling vertically at a speed of 10 m / s. What is the value of Vc in this case,if the front glass of the car will get wet? Answer :- Vc ≥ 10


Once again, I need Explanation! If you don’t know then no need to answer! ​

Answers

For the front glass of the car to get wet, [tex]V_c \geq 10 \ m/s[/tex].

The given parameters:

Speed of the car, = VcSpeed of the rain, = 10 m/s

The relative velocity of the car with respect to the falling rain is calculated as;

[tex]V_{C/R} = V_C- V_R[/tex]

If the speed of the car equals the speed of the rain, the rain will fall behind the car.If the speed of the rain is greater than speed of the car, the rain will fall far in front of the car.If the speed of the car is greater than speed of the rain, the rain will fall on the car.

Thus, for the front glass of the car to get wet, [tex]V_c \geq 10 \ m/s[/tex].

Learn more about relative velocity here: https://brainly.com/question/17228388

what role does gravity have in the motion of planets around the sun?

Answers

Answer:

The gravity helps the planets stay together near the Sun, without it Earth would be floating away with the planet eventually becoming frozen up, thus the role gravity have in the motion of planets around the sun is by keeping them together.

Explanation:

Hope this helps!

which is the hottest and coldest planet in solar system ?​

Answers

Answer:

hottest plant: vensus, close to the sun

coldest plant: Neptune, farthest from the sun

Explanation:

State one use and one disadvantage of the expansion of materials when they are heated.
use
disadvantage

Answers

An example of the use of expansion of materials when they are heated is in

Thermometers. Thermometer is an instrument which is used to measure the

temperature of a place.

It contains mercury which expands as temperature increases. This is used

to accurately determine the temperature of an object.

The disadvantage of expansion of materials when they are heated can be

seen in roads as there is expansion of the surface as a result of heat

exposure leads to roads being rough thereby incurring more costs for

repairs.

Read more about Heat expansion on https://brainly.com/question/1166774

A billiard ball with a speed of 5 m/s strikes another stationary billiard ball in a perfectly elastic collision.

After the collision, the first ball has a speed of 4.35 m/s and is traveling at an angle of 30° below its original line of motion.

Find the speed and angle of the second ball, with respect to the initial line of motion, after the collision.

Answers

Assuming both billiard balls have the same mass, conservation of momentum says

[tex]m\vec v_1 + m\vec v_2 = m{\vec v_1}\,' + m{\vec v_2}\,'[/tex]

where m = mass of both billiard balls, and v₁ and v₂ = their initial velocities, and v₁' and v₂' = their final velocities. The masses are the same so the exact value of m is irrelevant. The first ball has initial speed 5 m/s and the second is at rest, so

[tex]\left(5 \dfrac{\rm m}{\rm s}\right) \, \vec\imath = {\vec v_1}\,' + {\vec v_2}\,'[/tex]

After the collision, the first ball has speed 4.35 m/s and is moving at angle of 30° below the original path, so

[tex]{\vec v_1}\,' = \left(4.35\dfrac{\rm m}{\rm s}\right)\left(\cos(30^\circ) \, \vec\imath + \sin(30^\circ) \, \vec\jmath\right) \approx \left(3.77 \dfrac{\rm m}{\rm s}\right) \vec\imath + \left(-2.18 \dfrac{\rm m}{\rm s}\right) \vec\jmath[/tex]

Then the second ball has final velocity vector

[tex]{\vec v_2}\,' \approx \left(1.23 \dfrac{\rm m}{\rm s}\right) \vec\imath + \left(2.18 \dfrac{\rm m}{\rm s}\right) \vec\jmath[/tex]

so it moves with speed

[tex]\left\|{\vec v_2}\,'\right\| \approx \sqrt{\left(1.23\dfrac{\rm m}{\rm s}\right)^2 + \left(2.18\dfrac{\rm m}{\rm s}\right)^2} \approx \boxed{2.50 \dfrac{\rm m}{\rm s}}[/tex]

at an angle of

[tex]\theta \approx \tan^{-1}\left(\dfrac{2.18}{1.23}\right) \approx \boxed{60.5^\circ}[/tex]

or about 60.5° above the original line of motion.

The rays travelled from AIR to an unknown substance. Calculate the n value and
determine the unknown by following these steps: {6 marks}
Medium
n
air
water
ethanol
quartz glass
crown glass
flint glass
ruby
zircon
diamond
1
1.33
1.37
1.47
1.52
1.58
1.54
1.92
2.42
a. On your PAPER calculate n for the unknown value using Ray #1. Type in your
final answer to the electronic box. On paper, ensure #6 is written beside the
calculations.
b. Using the table provided, determine what material was used in the dish to
ar bu
ano below

Answers

Answer:

So what you do is you add all of them then you put an n with the answer.

Explanation:

2. What do aerospace engineers do? (1 point)
O design dams
O design machines
O design planes
O design cars

Answers

aerospace engineers design planes
They Design planes yeah

Which statement most completely describes a Lewis electron dot diagram? A.
a representation of the electrons that form bonds in a molecule
B.
a representation of the total number of electrons in an element, compound, or ion
C.
a representation of the total number and arrangement of electrons in an element, compound, or ion
D.
a representation of the arrangement of valence electrons in an element, compound, or ion

Answers

Answer:

D.

Explanation:

it is indeed a representation of how the valence electrons in an element,coumpound, or ion are arranged.

to ensure you i was just quized on this and D is the correct anwser

A representation of the arrangement of valence electrons in an element, compound, or ion -  statement most completely describes a Lewis electron dot diagram. Hence, option (D) is correct.

What is Lewis electron dot diagram?

If the compound's molecular formula is known, electron dot structures or Lewis dot formulas can be drawn.

It describes the type of bond and the placement of the atoms within the molecule that are joined together. In honor of American chemist Gilbert Newton Lewis, molecules are depicted as having a Lewis electron dot structure or simply a Lewis structure.

Lewis dot structures, also known as electron dot structures, are schematics that show the interatomic chemical bonds in a molecule. Additionally, they show how many lone pairs there are overall in each of the atoms that make up the molecule. Common names for Lewis dot structures include electron dot structures and Lewis structures. Lewis described an acid as an electron pair acceptor, while a base is an electron pair giver.

Learn more about  Lewis electron dot diagram here:

https://brainly.com/question/19093827

#SPJ2

60W of power is taken by a small electrical heater from a 12V supply Determine the current flowing through the heater​

Answers

Answer:

5 amps

Explanation:

I = P/V

I = current (amps)

P = power (watts)

V = voltage (volts)

I = 60/12

I = 5

how to find time with acceleration and velocity

Answers

final velocity minus initial velocity

then divide by acceleration

Depth perception is also known as ___________ vision.

Answers

Answer:

depth from optical expansion

Explanation:

which planet should punch travel to if his goal is to weigh in at 118 lb? refer to the table of planetary masses and radii given to determine your answer.

Answers

The planet that Punch should travel to in order to weigh 118 lb is Pentune.

The given parameters:Weight of Punch on Earth = 236 lbDesired weight = 118 lb

The mass of Punch will be constant in every planet;

[tex]W = mg\\\\m = \frac{W}{g}\\\\m = \frac{236}{g}[/tex]

The acceleration due to gravity of each planet with respect to Earth is calculated by using the following relationship;

[tex]F = mg = \frac{GmM}{R^2} \\\\g = \frac{GM}{R^2}[/tex]

where;

M is the mass of Earth = 5.972 x 10²⁴ kgR is the Radius of Earth = 6,371 km

For Planet Tehar;

[tex]g_T =\frac{G \times 2.1M}{(0.8R)^2} \\\\g_T = 3.28(\frac{GM}{R^2} )\\\\g_T = 3.28 g[/tex]

For planet Loput:

[tex]g_L =\frac{G \times 5.6M}{(1.7R)^2} \\\\g_L = 1.94(\frac{GM}{R^2} )\\\\g_L = 1.94g[/tex]

For planet Cremury:

[tex]g_C =\frac{G \times 0.36M}{(0.3R)^2} \\\\g_C = 4(\frac{GM}{R^2} )\\\\g_C = 4 g[/tex]

For Planet Suven:

[tex]g_s =\frac{G \times 12M}{(2.8R)^2} \\\\g_s = 1.53(\frac{GM}{R^2} )\\\\g_s = 1.53 g[/tex]

For Planet Pentune;

[tex]g_P =\frac{G \times 8.3 }{(4.1R)^2} \\\\g_P = 0.5(\frac{GM}{R^2} )\\\\g_P = 0.5 g[/tex]

For Planet Rams;

[tex]g_R =\frac{G \times 9.3M}{(4R)^2} \\\\g_R = 0.58(\frac{GM}{R^2} )\\\\g_R = 0.58 g[/tex]

The weight Punch on Each Planet at a constant mass is calculated as follows;

[tex]W = mg\\\\W_T = mg_T\\\\W_T = \frac{236}{g} \times 3.28g = 774.08 \ lb\\\\W_L = \frac{236}{g} \times 1.94g =457.84 \ lb\\\\ W_C = \frac{236}{g}\times 4g = 944 \ lb \\\\ W_S = \frac{236}{g} \times 1.53g = 361.08 \ lb\\\\W_P = \frac{236}{g} \times 0.5 g = 118 \ lb\\\\W_R = \frac{236}{g} \times 0.58 g = 136.88 \ lb[/tex]

Thus, the planet that Punch should travel to in order to weigh 118 lb is Pentune.

The complete question is below:

Which planet should Punch travel to if his goal is to weigh in at 118 lb? Refer to the table of planetary masses and radii given to determine your answer.

Punch Taut is a down-on-his-luck heavyweight boxer. One day, he steps on the bathroom scale and "weighs in" at 236 lb. Unhappy with his recent bouts, Punch decides to go to a different planet where he would weigh in at 118 lb so that he can compete with the bantamweights who are not allowed to exceed 118 lb. His plan is to travel to Xobing, a newly discovered star with a planetary system. Here is a table listing the planets in that system (find the image attached).

In the table, the mass and the radius of each planet are given in terms of the corresponding properties of the earth. For instance, Tehar has a mass equal to 2.1 earth masses and a radius equal to 0.80 earth radii.

Learn more about effect of gravity on weight here: https://brainly.com/question/3908593

Name the force used in removing iron scrap from a heap of mixed scrap. (a) Magnetic Force (b) Electrostatic force (c) Gravitational force (d) Friction Force​

Answers

Answer:

magnetic force

Explanation:

because iron is magnetic so magnet is able to attract iton

Heat always moves from hot to cold through the processes of?

Answers

Answer: The processes are conduction, convection and radiation.

Explanation: Unless people interfere, thermal energy — or heat — naturally flows in one direction only: from hot toward cold. Heat moves naturally by any of three means. The processes are known as conduction, convection and radiation. Sometimes more than one may occur at the same time.

what led scientists to the discovery of the strong nuclear force?

Answers

Answer:

Explanation:

The concept of a new strong nuclear force was introduced. In 1935, the first theory for this new force was developed by the Japanese physicist Hideki Yukawa, who suggested that the nucleons would exchange particles between each other and this mechanism would create the force.

Other Questions
What was life like during the Winter and Spring at Valley Forge? City and county politics in the late 1800s were influenced by organizations called. Two positive charges of 1 mC and 10 mC are separated by a distance of 10 m. Find thedirection and the magnitude of electrostatic force between the charges. |Describe thedirection in terms of the charges attract each other," or "the charges repel each other."mili C=1043 C how many rushing yards did the patriots have today PLEASE HELP ME WITH GEOMETRYWhat composition of rigid motions maps STR to MNP? what is the person's ultimate search in life? why? Use the passage to complete the activity. Claim: Wolves no longer need protection. Tension exists between the ranchers who feel threatened by wolves and the conservationists who want to see wolves protected. Many ranchers want to remove federal protections for the gray wolves. They want to allow hunting again. They point to increased wolf populations in several states. Numbers have grown from under 1,000 to more than 5,000. The increase has led to more wolf attacks on sheep and cattle. Conservationists say that current wolf packs and populations are not at all stable. They point to the fact that wolves neared extinction before laws protecting them were enacted. Allowing hunting could eliminate the gains.In 3 to 5 sentences, explain whether the author's evidence is relevant and sufficient to support the claim. Explain how the author could make the paragraph stronger. (4 points) HELPP 24 grams of salt and 16 grams of pure water were added to 160 grams of a 35% solution. What is the percentage of salt in the new solution? When they laughed at my feet, they did not realize that I had put on two different shoes because Id had to dress in the dark that morning. They did not realize that I had dressed in the dark so I wouldnt wake my father, who works nights to put food on our table. They did not realize that I had dressed in the dark to not disturb my mother, who had been up all night with the newborn twins. They just laughed.Which part of the outline does this paragraph most likely come from if the reader has already been introduced to the main character?the expositionthe rising actionthe falling actionthe reflection Consider the reaction below. H2PO4"" H2O Right arrow. H3O HPO42"" Which of the following is a base""conjugate acid pair? H2O and H3O H2O and H2PO4"" H2PO4"" and HPO42"" H2PO4"" and H3O. A rectangular prism with a volume of 101010 cubic units is filled with cubes with side lengths of \dfrac12 21 start fraction, 1, divided by, 2, end fraction unit.How many \dfrac12 21 start fraction, 1, divided by, 2, end fraction unit cubes does it take to fill the prism? Describe the say it, cover it, resay it method. (site 1). todos los individuos son personas? Solve x ^ 4 -8x ^ 2 9 = 0 how to calculate velocity with acceleration and time I seriously dont understand please help A problem is defined as Multiple Choice none of these answer is correct. what you already have, but want to make it better. the difference between what exists presently and what you expect or want. critical thinking. creativity. Which of these was adevelopment during theTang and Song Dynasties?A. gunpowderB. the plowC. wine please help me im giving brainliest The production report for Glenway Company for February contained the following information: Work in process, beginning of the month - 3,500 units; 1 / 5 completed Units completed and transferred to finished goods - 25,000 Work in process, end of month - 4,000 units; 1 / 4 completed Production costs for the month were: materials - $25,325; labor - $20,175; overhead - $38,950. Costs in beginning work in process were $5,250. What is the cost per equivalent unit? a. $3.45 b. $3.59 c. $3.20 d. $3.25