Answer:
chemical hazard
Explanation:
An unidentified compound is observed to melt sharply at 111-112 degrees C with vigorous evolution of a gas. The sample t hen solidifies and does not melt until the temperature reaches 155 degrees C and then melts with a broad range. Briefly explain these observations.
The compound likely undergoes decomposition upon heating, releasing gas at 111-112 degrees C and leaving behind a solid residue. The solid then undergoes a second, higher-temperature melting event at 155 degrees C,
which is broad due to the presence of impurities or the formation of a eutectic mixture. The initial decomposition may be due to the breaking of weak intermolecular bonds, the release of water or other volatile components, or a more complex melts with a broad range. Briefly explain these observations. decomposition pathway involving the cleavage of chemical bonds. The specific identity of the compound and its decomposition mechanism cannot be determined without further information or analysis.
Learn more about compound here:
https://brainly.com/question/13516179
#SPJ11
what is the iupac name of the following compound? 4-tert-butyl-3-chlorophenol ortho-tert-butylchlorophenol 4-tert-butyl-5-chlorophenol 2-tert-butyl-meta-chlorophenol
The correct IUPAC name for the given compound is 2-tert-butyl-3-chlorophenol.
The compound has a phenol ring substituted with a tert-butyl group at the second carbon atom and a chlorine atom at the third carbon atom.
According to the IUPAC nomenclature rules, we should first number the carbon atoms on the ring so that the substituents have the lowest possible locants. Since the tert-butyl group is at the second carbon atom and the chlorine atom is at the third carbon atom, we number the ring in such a way that the tert-butyl group gets the lower locant, and the chlorine atom gets the higher locant.
Thus, the compound is named as 2-tert-butyl-3-chlorophenol.
Click the below link, to learn more about IUPAC Nomenclature:
https://brainly.com/question/14379357
#SPJ11
calculate the net atp of one 1,3-bisphosphoglycerate (bpg) going through only glycolysis
The net atp of one 1,3-bisphosphoglycerate (bpg) going through only glycolysis is 2 ATP.
To calculate the net ATP produced when one molecule of 1,3-bisphosphoglycerate (1,3-BPG) goes through only glycolysis, we can look at the steps involved in this process.
1,3-BPG is formed from the phosphorylation of 3-phosphoglycerate during glycolysis. From the 1,3-BPG point, there are two main steps that generate ATP:
1. The conversion of 1,3-BPG to 3-phosphoglycerate (3-PG) by the enzyme phosphoglycerate kinase. This step produces one molecule of ATP.
2. The conversion of phosphoenolpyruvate (PEP) to pyruvate by the enzyme pyruvate kinase. This step also produces one molecule of ATP.
Since there are two ATP molecules produced from these steps, and the entire glycolysis pathway (starting from one glucose molecule) produces four ATP molecules in total, the net ATP yield for one 1,3-BPG going through only glycolysis is 2 ATP molecules.
Know more about ATP here:
https://brainly.com/question/14479867
#SPJ11
an increase in respiratory membrane thickness or a decrease in alveolar surface area will result in decreased oxygenation of the blood. true or false
The statement "an increase in respiratory membrane thickness or a decrease in alveolar surface area will result in decreased oxygenation of the blood." is true.
The respiratory membrane is where gas exchange occurs between the air in the alveoli and the blood in the pulmonary capillaries. An increase in respiratory membrane thickness will make it more difficult for oxygen to diffuse across the membrane, while a decrease in alveolar surface area reduces the available space for gas exchange.
Both of these factors contribute to a decrease in the efficiency of oxygenation of the blood, leading to lower levels of oxygen being carried by hemoglobin in the bloodstream. Maintaining an optimal respiratory membrane thickness and alveolar surface area is crucial for effective gas exchange and oxygenation of the blood.
To know more about respiratory membrane click on below link:
https://brainly.com/question/31034482#
#SPJ11
For the following reaction:
N₂(g) + 3H₂(g) → 2NH₃(g)
Identify the compositions which will produce same amount of NH₃
(a) 140 gm N₂ & 35 g H₂
(b) 18 g H₂ & 52 g N₂
(c) Total 20 moles of mixture having N₂ and H₂ present in stoichiometric ratio (No limiting reagent)
(d) 136 gm of mixture having mass fraction of H₂ = 6/34
Answer is option (a) and option (c), can someone please explain verifying ALL the options? Will mark you as the brainliest!
Okay, let's go through each option step-by-step:
(a) 140 gm N2 & 35 g H2
since the stoichiometry is 2NH3 : 3H2 : N2, for every 2 moles of NH3 produced, 3 moles of H2 and 1 mole of N2 react.
So, 140 gm N2 = 10 moles N2
35 gm H2 = 3 moles H2
Together they can produce 10/2 = 5 moles NH3. So this option produces the same amount of NH3.
(b) 18 g H2 & 52 g N2
H2 has 3 moles per 35 g so 18 g H2 = 2 moles H2
52 g N2 = 4 moles N2
Producing 2 * (2/3) = 4/3 = 2 moles NH3. This is less than options a and c.
(c) Total 20 moles of mixture having N2 and H2 in stoichiometric ratio.
With 20 moles total and in stoichiometric ratio, the moles of each will produce 2 moles of NH3. So this option also produces the same.
(d) 136 gm of mixture having mass fraction of H2 = 6/34
* Total mass = 136 g
* Mass fraction of H2 = 6/34 = 0.18
* So mass of H2 = 0.18 * 136 = 24 g
* Mass of 24 g H2 = 2 moles H2
* Remaining mass = 136 - 24 = 112 g is N2
* 112 g N2 = 8 moles N2
* Together 2 moles H2 and 8 moles N2 can produce 2 * (2/3) = 4/3 = 2 moles NH3.
This is less, so this option does not produce the same amount.
In summary, options a and c satisfy the criteria of producing the same amount (i.e. 5 moles) of NH3.
Let me know if this helps explain the problem! I can provide more details if needed.
calculate the standard cell potential e^0 cell for the following reaction: 2ag cl2 --->2agcl
The standard cell potential, E°cell, is a measure of the tendency of a chemical reaction to occur spontaneously in a cell. It is defined as the difference in the standard electrode potentials of the two half-reactions
that make up the cell reaction. In the given reaction, 2AgCl(s) → 2Ag(s) + Cl2(g), two half-reactions can be identified: AgCl(s) + e- → Ag(s) + Cl-(aq) and Cl2(g) + 2e- → 2Cl-(aq). The standard electrode potentials for these half-reactions are -0.222 V and +1.36 V, respectively. To calculate the standard cell potential, the reduction half-reaction is flipped and multiplied by the stoichiometric coefficients to balance the electrons. Then, the standard electrode potentials of the half-reactions are added. In this case, the standard cell potential can be calculated as follows:
[tex]E°cell = E°(reduction) + E°(oxidation)= -0.222 V + (+1.36 V)= +1.14 V[/tex]
Therefore, the standard cell potential for the given reaction is +1.14 V. Since the value is positive, the reaction is spontaneous in the forward direction.
Learn more about cell here:
https://brainly.com/question/30046049
#SPJ11
Which of the following statements is(are) true? Correct the false statements.
a. When a base is dissolved in water, the lowest possible pH of the solution is 7.0.
b. When an acid is dissolved in water, the lowest possible pH is 0.
c. A strong acid solution will have a lower pH than a weak acid solution.
d. A 0.0010-M Ba(OH)2 solution has a pOH that is twice the pOH value of a 0.0010-M KOH solution
The statement "When a base is dissolved in water, the lowest possible pH of the solution is 7.0" is false; the statement "When an acid is dissolved in water, the lowest possible pH is 0" is true; the statement "A strong acid solution will have a lower pH than a weak acid solution" is true; and, the statement "A 0.0010-M Ba(OH)2 solution has a pOH that is twice the pOH value of a 0.0010-M KOH solution" is false.
a. False. Correction: When a base is dissolved in water, the pH of the solution is greater than 7.0.
b. True. If an acid is dissolved in H20, then the lowest pH possible is 0.
c. True. When two solutions, one being a strong acid solution and the other being a weak acid solution are compared, the pH of the strong acid will be lower than the pH of the strong acid.
d. False. Correction: A 0.0010-M Ba(OH)2 solution has a pOH that is half the pOH value of a 0.0010-M KOH solution, because Ba(OH)2 is a strong base and releases two hydroxide ions per molecule, while KOH is a strong base that releases one hydroxide ion per molecule.
To learn more about an acid and base, visit: https://brainly.com/question/13646534
#SPJ11
which salts will be more soluble in an acidic solution than in pure water? baso3 pbcl2 caso4 ni(oh)2 csclo4
Out of the given salts, pbcl2 and ni(oh)2 will be more soluble in an acidic solution than in pure water. This is because they are insoluble in pure water but can form soluble complexes with hydrogen ions in an acidic solution.
The other salts, baso3, caso4, and csclo4, are already soluble in pure water and their solubility will not be significantly affected by the presence of acid. Salts that will be more soluble in an acidic solution than in pure water are those that react with the acidic protons (H+) to form a more soluble product. In the given list, BaSO3 (barium sulfite) and PbCl2 (lead(II) chloride) will be more soluble in an acidic solution because the acidic protons react with the sulfite and chloride ions, respectively, forming more soluble products.
Learn more about Salts here: brainly.com/question/16446935
#SPJ11
Why does C have a more exothermic electron affinity than N?
A) N has more unpaired electrons B) N has a larger size C) N has a smaller sizeD) N has a filled subshell E) N has a half-filled subshell
The correct answer is E) N has a half-filled subshell, which makes it harder for nitrogen to gain an additional electron and results in a less exothermic electron affinity compared to carbon.
The electron affinity is defined as the energy change that occurs when an atom gains an electron in the gas phase. The electron affinity of an atom depends on various factors, such as the electron configuration, atomic size, and nuclear charge.
In the case of C and N, both elements belong to the same period of the periodic table and have the same valence electron configuration (2s22p2). However, nitrogen has one more electron in its atomic structure compared to carbon.
When nitrogen gains an additional electron to form the N- ion, this electron occupies the 2p subshell, which is already half-filled. As a result, there is a strong repulsion between the added electron and the electrons already present in the 2p subshell, making it more difficult for the nitrogen atom to gain an electron. This makes nitrogen's electron affinity less exothermic than carbon.
On the other hand, when carbon gains an electron to form the C- ion, the added electron goes into the 2p subshell, which is not half-filled. As a result, there is less repulsion between the added electron and the electrons already present in the 2p subshell, making it easier for the carbon atom to gain an electron. This makes carbon's electron affinity more exothermic than nitrogen.
learn more about electron affinity here:
https://brainly.com/question/977718
#SPJ11
What product from reaction The basic hydrolysis of a nitrile yields first an amide and then a carboxylic acid salt plus ammonia or an amine.?
The basic hydrolysis of a nitrile yields an amide and then a carboxylic acid salt plus ammonia or an amine.
The first product formed is an amide from the hydrolysis of nitrile. The amide is formed as an intermediate product, and it can be further hydrolyzed under basic conditions to form a carboxylic acid salt (or carboxylate) and either ammonia (NH₃) or an amine (R-NH₂). The final products of the reaction depend on the conditions used and the nature of the nitrile substrate.
The overall reaction can be represented as follows:
R-CN + 2H₂O + OH- → R-COONa + NH₃ (or R-NH₂)
where R is an organic group attached to the nitrile functional group (-CN).
Learn more about hydrolysis here:
https://brainly.com/question/24244589
#SPJ11
Ion channels, such as the K^+ channel, can have open and closed forms that respond to membrane potential. In addition, an amino-terminal domain, called the inactivation domain or inactivation gate. can block the channel. This is called the ball and chain model of channel inactivation. Identify the statements that correctly describe the ball and chain model. There is more than one true statement. Select all that apply. The inactivation gate can only inactivate a channel that has dosed in response to depolarization. After depolarization and channel opening, the inactivation gate soon occludes the open channel. A mutation causing the loss of the inactivation gate in K^+ channels could result in a membrane that undergoes repolarization more slowly. A shorter tether or chain peptide strand attached to the inactivation domain would increase the time required to inactivate the K^+ channel.
The correct statements that describe the ball and chain model of channel inactivation are:
- After depolarization and channel opening, the inactivation gate soon occludes the open channel.
- A mutation causing the loss of the inactivation gate in K^+ channels could result in a membrane that undergoes repolarization more slowly.
Based on the provided statements, the following correctly describe the ball and chain model:
1. After depolarization and channel opening, the inactivation gate soon occludes the open channel.
2. A mutation causing the loss of the inactivation gate in K^+ channels could result in a membrane that undergoes repolarization more slowly.
The other statements are not accurate descriptions of the ball and chain model. The inactivation gate can inactivate a channel regardless of whether it has closed in response to depolarization. Additionally, a shorter tether or chain peptide strand attached to the inactivation domain would likely decrease, not increase, the time required to inactivate the K^+ channel.
To know more about Ball and Chain Model:
https://brainly.com/question/30255886
#SPJ11
be sure to answer all parts. calculate the molar mass of the following substances: (a) li2co3 g/mol (b) kno3 g/mol (c) mg3n2 g/mol
(a) The molar mass of Li2CO3 can be calculated by adding the atomic masses of 2 Li atoms, 1 C atom, and 3 O atoms:
Molar mass of Li2CO3 = 2(6.941 g/mol) + 1(12.011 g/mol) + 3(15.999 g/mol) = 73.89 g/mol
Therefore, the molar mass of Li2CO3 is 73.89 g/mol.
(b) The molar mass of KNO3 can be calculated by adding the atomic masses of 1 K atom, 1 N atom, and 3 O atoms:
Molar mass of KNO3 = 1(39.0983 g/mol) + 1(14.0067 g/mol) + 3(15.999 g/mol) = 101.103 g/mol
Therefore, the molar mass of KNO3 is 101.103 g/mol.
(c) The molar mass of Mg3N2 can be calculated by adding the atomic masses of 3 Mg atoms and 2 N atoms:
Molar mass of Mg3N2 = 3(24.305 g/mol) + 2(14.007 g/mol) = 100.949 g/mol
Therefore, the molar mass of Mg3N2 is 100.949 g/mol.
Learn more about molar mass here:
https://brainly.com/question/22997914
#SPJ11
A direct current is passed through a 1.00 M aqueous solution of lithium chloride (LiCl). Chlorine gas is observed as a product at the anode. Based on the information in the table above, which of the following identifies the chemical species that is formed at the cathode and gives the correct justification?
When a direct current is passed through a 1.00 M aqueous solution of lithium chloride (LiCl), chlorine gas is observed as a product at the anode. Based on this information, lithium (Li) is formed at the cathode,
Correct justification is as follows:
1. In the electrolysis process, the anode is the positive electrode, and the cathode is the negative electrode.
2. Lithium chloride (LiCl) dissociates into lithium ions (Li+) and chloride ions (Cl-) in the aqueous solution.
3. Chlorine gas (Cl2) is produced at the anode due to the oxidation of chloride ions (2Cl- → Cl2 + 2e-).
4. Since chlorine gas is produced at the anode, the remaining lithium ions (Li+) in the solution will move towards the cathode.
5. At the cathode, lithium ions (Li+) are reduced to form lithium (Li) by gaining an electron (Li+ + e- → Li).
Therefore, lithium (Li) is the chemical species that is formed at the cathode during this process.
To know more about lithium chloride- https://brainly.com/question/28955893
#SPJ11
how many grams of carbon dioxide are produced from the combustion of a candle formula
The amount of carbon dioxide produced from the combustion of a candle formula depends on the specific formula and the mass of the candle. However, on average, the combustion of one gram of wax in a candle produces approximately 3 grams of carbon dioxide.
Most candles are made of paraffin wax, which is a hydrocarbon with the general formula CnH2n+2. Let's assume that we are dealing with a simple hydrocarbon, such as C25H52 (a common component of paraffin wax).
During combustion, the hydrocarbon reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). The balanced chemical equation for the combustion of C25H52 is:
C25H52 + 38O2 → 25CO2 + 26H2O
To find the grams of CO2 produced, we need to know the mass of C25H52 that is combusted. For example, let's say we have 1 mole of C25H52 (molecular weight = 25*12.01 + 52*1.01 = 352.76 g/mol).
From the balanced equation, 1 mole of C25H52 produces 25 moles of CO2. The molecular weight of CO2 is 12.01 (C) + 2*16.00 (O) = 44.01 g/mol. So, the mass of CO2 produced from 1 mole of C25H52 is:
25 moles CO2 * 44.01 g/mol = 1100.25 grams of CO2
So, in this example, the combustion of 1 mole (352.76 grams) of C25H52 from a candle produces 1100.25 grams of carbon dioxide.
Learn more about combustion at: brainly.com/question/15117038
#SPJ11
For the following equilibrium, what will occur if the vessel contracts: C(s) H2O(g)⇌CO(g) H2(g)
Select the correct answer below: a. shift right b. shift left c. no change d. impossible to predict
Answer:
When the vessel contracts, the equilibrium will shift towards the side with fewer moles of gas, which is the right side in this case.
is the sign of δs° obtained (question 3b) consistent with the expectations of dissolving a salt in water?
The obtained negative δs° sign in question 3b is consistent with the expected behavior of salt dissolution in water, which is an exothermic process releasing energy due to the hydration of ions by water molecules.
Yes, the sign of δs° obtained in question 3b is consistent with the expectations of dissolving a salt in water. When a salt dissolves in water, the process is exothermic, meaning it releases heat into the surrounding environment. This is because the salt ions are surrounded by water molecules, which form hydration shells around the ions and release energy as they do so. This release of energy results in a negative value for δs°, which is exactly what was obtained in question 3b. Therefore, the sign of δs° is consistent with the expected behavior of salt dissolution in water.
learn more about exothermic process here:
https://brainly.com/question/29866491
#SPJ11
how much heat is gained by copper when 51.8 g of copper is warmed from 15.5°c to 76.4°c? the specific heat of copper is 0.385 j/(g · °c)..
The heat gained by copper when 51.8 g of copper is warmed from 15.5°C to 76.4°C is 1,090.97 J.
To calculate the heat gained, you can use the formula q = mcΔT, where q is the heat gained, m is the mass of copper, c is the specific heat of copper, and ΔT is the change in temperature.
1. Determine the mass (m): 51.8 g
2. Identify the specific heat (c): 0.385 J/(g·°C)
3. Calculate the change in temperature (ΔT): 76.4°C - 15.5°C = 60.9°C
4. Plug the values into the formula: q = (51.8 g) x (0.385 J/(g·°C)) x (60.9°C)
5. Calculate the heat gained (q): 1,090.97 J
To know more about specific heat click on below link:
https://brainly.com/question/11297584#
#SPJ11
Which one statement is NOT correct?
A) A standard AA-sized battery is a Galvanic cell
B) When a rechargeable battery is being charged, the setup is that of an electrolytic cell
C) In the rechargeable battery, the electrode which is the cathode during discharge (i.e. while the battery is producing current) becomes the anode during charging.
D) In the lead (Pb) car battery, the chemistry involves lead in the 0, +3 and +5 oxidation states.
E) In the H2/O2 fuel cell, the overall cell reaction is: 2 H2(g) + O2(g) → 2 H2O
The statement that is NOT correct is D) In the lead (Pb) car battery, the chemistry involves lead in the 0, +3 and +5 oxidation states.
The correct oxidation states for lead in a lead-acid battery are 0 and +4, not +3 or +5. The negative electrode (the anode) is made of lead, and it undergoes oxidation to form lead sulfate (PbSO4) and release electrons. The positive electrode (the cathode) is made of lead dioxide (PbO2), and it undergoes reduction to form lead sulfate (PbSO4) and consume electrons. The electrolyte is a solution of sulfuric acid (H2SO4), which facilitates the movement of ions between the electrodes. The other statements are correct. A standard AA-sized battery is a Galvanic cell, which converts chemical energy into electrical energy. When a rechargeable battery is being charged, the setup is that of an electrolytic cell, which uses electrical energy to drive a non-spontaneous chemical reaction. In the rechargeable battery, the electrode which is the cathode during discharge becomes the anode during charging. In the [tex]H2/O2[/tex] fuel cell, the overall cell reaction is: 2 [tex]H2(g) + O2(g) → 2 H2O,[/tex] which produces electrical energy from the reaction of hydrogen and oxygen.
Learn more about oxidation states here:
https://brainly.com/question/17161178
#SPJ11
A 500.0 g block of dry ice (solid CO₂, molar mass = 44.0 g) vaporizes to a gas at
room temperature. Calculate the volume of gas produced at 25.0 °C and 1.75
atm.
Show your work
When solid carbon dioxide (dry ice) vaporizes to gas, it undergoes a phase change from solid to gas without melting into a liquid. This process is called sublimation.
To calculate the volume of gas produced, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
First, we need to determine the number of moles of gas produced. We can use the molar mass of carbon dioxide to convert from mass to moles:
moles of CO₂ = mass of dry ice / molar mass of CO₂
moles of CO₂ = 500.0 g / 44.0 g/mol
moles of CO₂ = 11.36 mol
Since the dry ice sublimes directly to a gas, all of the moles of CO₂ will be in the gas phase.
Next, we can plug in the values we know into the ideal gas law:
PV = nRT
V = nRT / P
where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).
Converting the temperature to Kelvin:
T = 25.0 °C + 273.15 = 298.15 K
Plugging in the values:
V = (11.36 mol) x (0.08206 L·atm/(mol·K)) x (298.15 K) / (1.75 atm)
V = 439.4 L
Therefore, the volume of gas produced is approximately 439.4 L.
When solid carbon dioxide (dry ice) vaporizes to gas, it undergoes a phase change from solid to gas without melting into a liquid. This process is called sublimation.
To calculate the volume of gas produced, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
First, we need to determine the number of moles of gas produced. We can use the molar mass of carbon dioxide to convert from mass to moles:
moles of CO₂ = mass of dry ice / molar mass of CO₂
moles of CO₂ = 500.0 g / 44.0 g/mol
moles of CO₂ = 11.36 mol
Since the dry ice sublimes directly to a gas, all of the moles of CO₂ will be in the gas phase.
Next, we can plug in the values we know into the ideal gas law:
PV = nRT
V = nRT / P
where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).
Converting the temperature to Kelvin:
T = 25.0 °C + 273.15 = 298.15 K
Plugging in the values:
V = (11.36 mol) x (0.08206 L·atm/(mol·K)) x (298.15 K) / (1.75 atm)
V = 439.4 L
Therefore, the volume of gas produced is approximately 439.4 L.
Learn more about temperature on:
https://brainly.com/question/7510619
#SPJ6
arrange the oxides in each of the following groups in order of increasing basicity: (a) na2o, al2o3, sro and (b) cro3, cro, cr2o3.
The arrangement oxides in each of the following groups of increasing basicity: (a) Al2O3 < SrO < Na2O. and (b) CrO3 < CrO < Cr2O3.
First, we need to consider their positions in the periodic table and their metallic or non-metallic character and in general, basicity increases with increasing metallic character. (a) Na2O, Al2O3, SrO: These oxides belong to Group 1 (Na), Group 2 (Sr), and Group 13 (Al) in the periodic table. Na2O is the most basic oxide due to sodium's high metallic character as a Group 1 element and SrO, from Group 2, is less basic than Na2O but still exhibits basic behavior. Al2O3, an amphoteric oxide from Group 13, is the least basic in this group, so, the order of increasing basicity for these oxides is Al2O3 < SrO < Na2O.
(b) CrO3, CrO, Cr2O3: These oxides are chromium compounds in different oxidation states, CrO3, a chromium(VI) oxide, has high oxidation state and is acidic. CrO, a chromium(II) oxide, is amphoteric, showing both acidic and basic properties. Cr2O3, a chromium(III) oxide, is basic but less basic compared to typical metallic oxides. The order of increasing basicity for these oxides is CrO3 < CrO < Cr2O3.
Learn more about periodic table at:
https://brainly.com/question/15987580
#SPJ11
calculate the molar solubility of kht (in mol/l) when 0.950 g of kht is dissolved in 25.00ml of water.
When 0.950 g of KHT is dissolved in 25.00 ml of water, its molar solubility (measured in mol/l) is 0.202 mol/L.
Molar solubility is the number of moles of a solute that can dissolve in a solvent before the solvent reaches saturation.
To calculate the molar solubility of KHT (potassium hydrogen tartrate), we need to first find the number of moles of KHT present in 0.950 g.
The molar mass of KHT is 188.18 g/mol (39.10 g/mol for potassium + 133.08 g/mol for hydrogen tartrate).
Using the formula:
moles = mass/molar mass
We can calculate the moles of KHT as:
moles = 0.950 g / 188.18 g/mol = 0.00505 moles
Now, we need to find the volume of the solution in liters.
25.00 ml is equal to 0.025 L.
Finally, we can use the formula for molar solubility:
molar solubility = moles of solute/volume of solution in liters
molar solubility = 0.00505 moles / 0.025 L = 0.202 M
Therefore, the molar solubility of KHT in this solution is 0.202 mol/L.
Learn more about molar solubility: https://brainly.com/question/28566275
#SPJ11
1) Carbon-14 is formed as the decay product of Nitrogen-15, which was formed when a cosmic ray bombards the N-15.
What is the particle equivalent of the cosmic ray involved in this decay process?
2) Carbon-14 get locked in organic material through this process.
3) How many half-lives of Carbon-14 decay will leave behind approximately 1/8 of the original mass of Carbon-14?
4) Using the equation for radioactive decay, if you start with one gram of radioactive substance that has a half-life of 24,500 years, how many years will it take for the substance to decay to 0.8 grams?
The cosmic ray involved in the decay process of Nitrogen-15 to form Carbon is a high-energy proton. , Carbon-14 gets locked in organic material through the process of photosynthesis,
where plants take in carbon dioxide from the atmosphere, including the Carbon-14 isotope, and incorporate it into their tissues. Animals then eat the plants, incorporating Carbon-14 into their own tissues.
Carbon has a half-life of approximately 5,700 years. To determine how many half-lives are needed to leave behind approximately 1/8 of the original mass, we can use the formula:
N = (1/2)^n * N0
where N is the final mass, N0 is the initial mass, and n is the number of half-lives.
Setting N = 1/8 and N0 = 1, we get:
1/8 = (1/2)^n
Taking the logarithm of both sides, we get:
n = log(1/8) / log(1/2) = 3
Therefore, it would take three half-lives of Carbon-14 decay to leave behind approximately 1/8 of the original mass.
The equation for radioactive decay is given by:
N(t) = N0 * e^(-kt)
where N(t) is the amount of radioactive substance remaining at time t, N0 is the initial amount, k is the decay constant, and e is the base of the natural logarithm.
The half-life of the substance is related to the decay constant by the equation:
k = ln(2) / t1/2
where t1/2 is the half-life.
Substituting the given values, we get:
k = ln(2) / 24500 = 2.83 x 10^-5 / year
To find the time it takes for the substance to decay to 0.8 grams, we can use the equation:
0.8 = 1 * e^(-2.83 x 10^-5 t)
Taking the natural logarithm of both sides, we get:
ln(0.8) = -2.83 x 10^-5 t
Solving for t, we get:
t = -ln(0.8) / 2.83 x 10^-5 = 11,848 years
Therefore, it would take approximately 11,848 years for one gram of radioactive substance with a half-life of 24,500 years to decay to 0.8 grams.
Learn more about Carbon here:
https://brainly.com/question/14272000
#SPJ11
What is the formula for pentaphosphorus tetrasulfide
Answer:
P5S4
Explanation:
Penta means 5 and tetra means 4, therefore P5S4
write the formula for the conjugate acid of each of the following bases. a. NH3
b. C6H5NH2
c. HSO4
d. CO32
a particular reaction has a δho value of -159. kj and δgo of -162. kj at 201. k. calculate δso at 201. k in j/k
The entropy change (δso) at 201 K is -0.015 J/K.
To calculate δso at 201 K in J/K, we can use the following equation:
δgo = δho - Tδso
Where δho is the enthalpy change, δgo is the Gibbs free energy change, T is the temperature in Kelvin, and δso is the entropy change.
Substituting the given values, we get:
-162. kj = -159. kj - (201 K)δso
Solving for δso, we get:
δso = (-162. kj + 159. kj) / (201 K)
δso = -0.015 J/K
Therefore, the entropy change (δso) at 201 K is -0.015 J/K.
Learn more about δgo at https://brainly.com/question/9179942
#SPJ11
4. Is there a solvent listed in the materials section that is inappropriate for NMR? Explain. 5. Which solvent would you order if you determined that a sample required a more polar solvent than what is available above? Explain. Saved
4. Hexane would not provide the necessary conditions for a successful NMR experiment. 5. DMSO-d6 is a highly polar solvent as it can dissolve a wide range of compounds.
Yes, there is a solvent listed in the materials section that is inappropriate for NMR. The solvent is hexane. Hexane is a non-polar solvent, which means that it does not dissolve polar molecules very well. Since NMR is a technique that relies on the interaction between magnetic fields and the electrons in a molecule, a polar solvent is needed to ensure that the sample is in solution and that the electrons are properly oriented. Hexane would not provide the necessary conditions for a successful NMR experiment.
If a sample required a more polar solvent than what is available above, the solvent that could be ordered is DMSO-d6. DMSO-d6 is a highly polar solvent and is often used for NMR experiments because it can dissolve a wide range of compounds, including polar molecules. Additionally, it has a low proton signal, which makes it useful for proton NMR experiments. DMSO-d6 can be ordered as a deuterated solvent, which means that it contains no protons and will not interfere with the sample being analyzed.
To know more about solvent please refer: https://brainly.com/question/30885015
#SPJ11
4. Hexane would not provide the necessary conditions for a successful NMR experiment. 5. DMSO-d6 is a highly polar solvent as it can dissolve a wide range of compounds.
Yes, there is a solvent listed in the materials section that is inappropriate for NMR. The solvent is hexane. Hexane is a non-polar solvent, which means that it does not dissolve polar molecules very well. Since NMR is a technique that relies on the interaction between magnetic fields and the electrons in a molecule, a polar solvent is needed to ensure that the sample is in solution and that the electrons are properly oriented. Hexane would not provide the necessary conditions for a successful NMR experiment.
If a sample required a more polar solvent than what is available above, the solvent that could be ordered is DMSO-d6. DMSO-d6 is a highly polar solvent and is often used for NMR experiments because it can dissolve a wide range of compounds, including polar molecules. Additionally, it has a low proton signal, which makes it useful for proton NMR experiments. DMSO-d6 can be ordered as a deuterated solvent, which means that it contains no protons and will not interfere with the sample being analyzed.
To know more about solvent please refer: https://brainly.com/question/30885015
#SPJ11
Calculate ΔHrm for the following reaction based on the given data. Is this reaction endothermic or exothermic? C2H4 (g) + H2 (g) → C2H6 (g)C2H4 (g) + 302 (g) → 2CO2 (g) + 2H20(1) AH1-1411. kJ/moleC2H6 (g) + 7/202 (g) → 2CO2 (g) + 3H2O (l) Δ㎐ =-1560. kJ/moleH2 (g) + I/202 (g) → H2O (l) AH3 =-285.8 kJ/moleHow much heat is transferred between the system and the surroundings when 3.5 moles of ethylene (C2H4) reacts with excess of hydrogen gas to produce ethane (C2H6)? Please specify if energy is release or absorbed by the system.
ΔHrm for the given reaction can be calculated as follows: [tex]ΔHrm = ΣnΔHf(products) - ΣnΔHf(reactants)[/tex] , [tex]ΔHrm = [2(-393.5) + 2(-241.8)] - [-1411 + (-285.8)][/tex],
[tex]ΔHrm = -136.4 kJ/mole[/tex]
The negative value of ΔHrm indicates that the reaction is exothermic, which means that energy is released by the system during the reaction.
The amount of heat transferred between the system and surroundings can be calculated using the equation:
[tex]q = ΔHrxn × n[/tex]
[tex]q = (-136.4 kJ/mole) × (3.5 moles)[/tex]
[tex]q = -477.4 kJ[/tex]
Therefore, the system releases 477.4 kJ of heat to the surroundings during the reaction.
learn more about reaction here:
https://brainly.com/question/28984750
#SPJ11
Given the values of ΔH∘rxn, ΔS∘rxn, and T below, determine ΔSuniv.A. ΔH∘rxn= 84 kJ , ΔSrxn= 144 J/K , T= 300 KExpress your answer using two significant figures.
The value of ΔSuniv is the change in entropy of the universe, which is a measure of the degree of disorder or randomness that occurs during a chemical or physical process. So ΔSuniv = -127 J/K
The calculation of ΔSuniv involves using the equation ΔSuniv = ΔSsys - (ΔHsys / T), where ΔSsys is the change in entropy of the system and ΔHsys is the change in enthalpy of the given system. Plugging in the given values and converting ΔH∘rxn to J gives
ΔSuniv = (144 J/K) - (84,000 J / 300 K) = -127 J/K.The negative value of ΔSuniv indicates that the process is not spontaneous at the given temperature and pressure. Conversely, a negative value of ΔSuniv indicates that a process decreases the degree of disorder in the universe, which means that it is non-spontaneous under the given conditions.
Learn More about entropy
https://brainly.com/question/6364271
#SPJ4
what is the velocity of propagation for disturbances on the transmission line? type your answer in feet per nanosecond to two places after the decimal.
The velocity of propagation for disturbances on a transmission line refers to the speed at which electrical signals or electromagnetic waves travel along the transmission line.
To find how long it takes for a disturbance to traverse the entire length of the transmission line, we can use the formula: time = distance/velocityThe distance is given as 250 ft, and the velocity of propagation for disturbances on the transmission line is given as 0.5 ft/ns. Thus, we have: time = 250/0.5 = 500 nsTherefore, it takes 500 nanoseconds for a disturbance to traverse the entire length of the transmission line.your question is incomplete. The complete question may be as follows:
"What is the velocity of propagation for disturbances on the transmission line? (Use c = 1 ft/ns as the speed of light in a vacuum.)
vp = 0.5 ft/ns
vp = 1 ft/ns
vp = 0.25 ft/ns
vp = 2 ft/ns
QUESTION 8
How long does it take for a disturbance to traverse the entire length of the transmission line? Type your answer in nanoseconds to one place after the decimal."
know more about "velocity" here: https://brainly.com/question/24445340
#SPJ11
The velocity of propagation for disturbances on a transmission line refers to the speed at which electrical signals or electromagnetic waves travel along the transmission line.
To find how long it takes for a disturbance to traverse the entire length of the transmission line, we can use the formula: time = distance/velocityThe distance is given as 250 ft, and the velocity of propagation for disturbances on the transmission line is given as 0.5 ft/ns. Thus, we have: time = 250/0.5 = 500 nsTherefore, it takes 500 nanoseconds for a disturbance to traverse the entire length of the transmission line.your question is incomplete. The complete question may be as follows:
"What is the velocity of propagation for disturbances on the transmission line? (Use c = 1 ft/ns as the speed of light in a vacuum.)
vp = 0.5 ft/ns
vp = 1 ft/ns
vp = 0.25 ft/ns
vp = 2 ft/ns
QUESTION 8
How long does it take for a disturbance to traverse the entire length of the transmission line? Type your answer in nanoseconds to one place after the decimal."
know more about "velocity" here: https://brainly.com/question/24445340
#SPJ11
How many molecules of C2H6 are required to react with 5.6 mol O2? 2 C2H6 +7024 CO₂+6 H₂O +4CO,+6H,O• Use 6.022 x 1023 mol-1 for Avogadro's number.
• Your answer should have two significant figures.
The molecules of [tex]C_{2}H_{6}[/tex] required to react with 5.6 mol of [tex]O_{2}[/tex] is [tex]9.6*10^{23}[/tex]. This is obtained when Avogadro's number is considered.
Avogadro's numberHere the balanced chemical reaction is [tex]2C_{2}H_{6} +7O_{2} +4CO_{2} +6H_{2}O > > > > 4CO_{2} + 6H_{2}O[/tex]
Here, 7 moles of [tex]O_{2}[/tex] reacts with 2 moles of [tex]C_{2}H_{6}[/tex], if we start with 5.6 mol of [tex]O_{2}[/tex] we get
[tex]\frac{5.6*2}{7}[/tex]
= 1.6 moles
To find the molecules multiply this with Avogadro's number we get
[tex]9.6*10^{23}[/tex]
The proportionality factor that connects the number of constituent particles in a sample with the amount of substance in that sample is known as the Avogadro constant, also known as NA or L. [tex]6.02214076*10^{23}[/tex]reciprocal moles is the precise value of this SI defining constant.
Avogadro's number can be multiplied or divided to convert between molecules and moles: Adding [tex]6.02214076*10^{23}[/tex]to the number of moles will convert it to molecules. Divide the number of molecules by [tex]6.02214076*10^{23}[/tex] in order to convert that number to moles.
For more information on Avogadro's number kindly visit to
https://brainly.com/question/11907018
#SPJ1