The following is a list of the two types of group discussions: Group discussion on a particular topic. Group Discussion Based on a Case Study.
What are the three components of group discussion?Clarity (the main points to be discussed), content (the vertical depth in each point), and confidence are the three "Cs" that rank you highly on this parameter.
What is the nature of group discussion?A group meeting to discuss a particular subject is called a group discussion. A lot of recruiters use group discussion (GD) to test a candidate's leadership abilities, topic knowledge, and other skills. A candidate's ability to think outside the box is also put to the test in two additional GD types.
To learn more about group discussions here:
https://brainly.com/question/29508916
#SPJ4
morgan wants to have a new roof built. she has contacted three companies. all companies have very similar prices in terms of labor and materials. company 1 offered a material loading percentage of 68%. company 2 offered a percentage of 54%. and company 3 offered a percentage of 38%. which one should morgan choose?
Company 3, Because if the labor and materials are the same for all three, then she needs to find the company with the lowest material loading percentage in order to get the most affordable price.
What is a material percentage?A portion of the basis is used to establish the materiality threshold. Net income (earnings / profits) is the auditing standard used as a foundation. Most often, percentages fall between 5 and 10 percent (for instance, a sum under 5% is insignificant, over 10% is material, and between 5 and 10% demands discretion).Planned manufacturing overhead divided by 100 equals budgeted direct material cost. Budgeted direct material cost = (budgeted manufacturing overhead 100).The formula is (actual quantity utilized standard price) (standard quantity permitted standard price) to determine a direct materials efficiency variance.If the material margin percentage is higher than 40%, you usually have enough margin to be profitable even with a complicated cost structure, and there may be room to increase your bottom line even further.Learn more about direct material cost refer to :
https://brainly.com/question/26245657
#SPJ4
What do you mean by purchasing parity?
The rate at which the equivalent amount of products and services might be purchased in one nation using the currency of the other at a certain exchange rate.
What do you mean by purchasing parity?The term "purchasing power parity," or PPP, refers to the relative buying power of different national currencies throughout the world. To put it another way, the idea behind buying power parity is that every nations' exchange rates should be equal so that consumers may pay the same price for the same amount of products and services everywhere in the world.
One of the most crucial macroeconomic indicators used by economists to assess a nation's economic output and level of life is the purchasing power parity.
To know more about purchasing parity, visit:
https://brainly.com/question/28199500
#SPJ4
Sometimes the producer of a product owns the businesses that supply them with raw goods to make that product and own the stores that sell that product. This situation may best be called.
In some cases, the companies that manufacture a product's basic materials and own the retail outlets where it is sold are owned by the same company. Vertical integration is a better term to describe this circumstance. The right answer is C.
Being able to sell your products and provide your own firm with the raw materials needed to make your finished goods is advantageous. This company has the ability to control the pricing. Vertical integration is the term used for this. Vertical integration is a tactic that enables a business to streamline operations by directly controlling different stages of the production process instead of depending on outside suppliers or contractors. Vertical integration entails buying out or expanding one or more critical components of a business's production or supply chain. Vertical integration is demonstrated by Netflix, which switched from licensoring programmes and films from large studios to creating its own unique content.
Sometimes the producer of a product owns the businesses that supply them with raw goods to make that product AND own the stores that sell that product. This situation may best be called
A) laissez-faire.
B) supply and demand.
C) vertical integration.
D) horizontal integration.
To learn more on vertical integration, visit:
https://brainly.com/question/11820020
#SPJ4
What is CO2 used for in manufacturing?
Carbon dioxide ( chemical formula CO2) is a chemical compound made up of molecules that each have one carbon atom covalently double bonded to two oxygen atoms.
How is CO2 used?The CO2 produced can then be sold to industries that require it. Carbon dioxide is also released into the atmosphere naturally when organisms respire or decompose, carbonate rocks weather, deforestation and forest fires occur, and volcanoes erupt.
Carbon dioxide is also used in the food industry.
It is an essential component in food supply chains because it is used to humanely stun animals before slaughter and in vacuum-pack products such as bread to extend their shelf life.
Animals are essentially knocked out before slaughter by being given high concentrations of the gas, which causes a loss of consciousness and is thought to be around 70% to 90% concentrated in the air.
To learn more about Carbon dioxide refer to:
https://brainly.com/question/13202738
#SPJ4
Which resource planning tool provides information on resource responsibility and accountability?
A resource planning tool that provides information on resource responsibility and accountability is a Responsibility Assignment Matrix (RAM).
A RAM is a project management tool that is used to define the roles and responsibilities of team members and other stakeholders in relation to specific tasks or deliverables.
It typically includes a list of tasks or deliverables, along with the names of the individuals or groups responsible for completing each one. This can help to clarify who is responsible for each aspect of the project and ensure that everyone understands their roles and responsibilities.
A RAM can also help to identify any potential conflicts or overlaps in responsibilities and ensure that all resources are being used effectively and efficiently.
Learn more about resource planning tools at
https://brainly.com/question/15714876?referrer=searchResults
#SPJ4
What makes a good backlog refinement session?
During the backlog refinement, you prefer to be positive a few key factors get tackled: Estimate the memories the use of story factors or T-shirt sizing.
Acceptance Criteria - Establish clear and measurable Acceptance Criteria for each User Story. Each consumer story have to absolutely convey the enterprise value.
What is the major objective for backlog refinement session?The intent of backlog refinement is to make certain that the backlog remains populated with objects that are relevant, distinct and estimated to a degree suitable with their priority, and in keeping with contemporary grasp of the undertaking or product and its objectives
Ongoing Product Backlog Refinement (PBR) is wished inside every Sprint to refine gadgets to be prepared for future Sprints. Key things to do of PBR are (1) splitting massive items, (2) clarifying objects until equipped for implementation except in addition “what” questions, and (3) estimating size, “value”, risks, and so forth.
Learn more about backlog refinement session here:
https://brainly.com/question/14789393#SPJ4because short-term interest rates are much more volatile than long-term rates, you would, in the real world, generally be subject to much more price risk if you purchased a 30-day bond than if you bought a 30-year bond. because short-term interest rates are much more volatile than long-term rates, you would, in the real world, generally be subject to much more price risk if you purchased a 30-day bond than if you bought a 30-year bond. false true
It is untrue to say that buying a 30-day bond will cost you less than buying a 30-year bond.
What is the cost of the item?The sum an entrepreneur pays for an interest is referred to as the purchase price, and that amount has become the lender's cost basis for determining profit or loss when the investment is sold.
Briefing:Long-term interest rate increases are more likely to occur than short-term ones. As a result, long-term interest rates fluctuate more than short-term ones.
The cost of bonds falls as the interest rates go up. Additionally, the danger of rising interest rates rises as bond maturities lengthen. As a reason, long-term bonds will be riskier than short-term bonds.
As a result, the claim is untrue.
To know more about Purchased visit:
https://brainly.com/question/24112214
#SPJ4
"If nominal GDP is less than real GDP, then the price level must have fallen during the year." (Agree or Disagree)
If nominal GDP is less than real GDP, then the price level must have fallen during the year, agree.
So when the nominal GDP is less than the real GDP, a positive difference in nominal minus real GDP signifies inflation and so a negative difference tend to signify the deflation. Thus, inflation occurs when nominal GDP is higher than real GDP.
However, the deflation occurs when real GDP is higher than nominal GDP. So, yes, it is possible that in the same year, nominal GDP can be less than the real GDP. This is possible if prices in current year are less than the prices in the base year.
Hence, an increase in nominal GDP means that the prices have also increased.
To learn more about Real GDP here:
https://brainly.com/question/15171681
#SPJ4
What are the 4 common classification of vehicle?
The four common classifications of vehicles are personal, commercial, off-road, and recreational. Passenger vehicles are designed for everyday use and include cars, minivans and SUVs.
Commercial vehicles are typically used for commercial purposes and include vans, garbage trucks, and tow trucks. All-terrain vehicles are designed for off-road terrain and include ATVs, snowmobiles, and motocross bikes. Recreational vehicles are intended for leisure activities and include motorhomes, camper trailers, and boats.
All these vehicles are classified based on their intended purpose. Passenger cars are intended for everyday use, utility vehicles are intended for companies, off-road vehicles are intended for off-road use, and recreational vehicles are intended for leisure activities.
To know more about vehicles click here
https://brainly.com/question/24745369
#SPJ4
Do we use == in pseudocode?
The symbols == and!= denote if something is equal or not. A variable is 0 negative when it has a minus sign before it.
A variable is something that can take on a variety of different values. A variable is a symbol. A variable in an experiment is something that can be changed. Because their values are studied during an experiment under the presumption or condition that they are dependent on the values of other variables according to a law or rule, they are known as dependent variables. In the context of the experiment in question, independent variables are those that are not considered as dependent on any other factors. Time, space, density, mass, fluid flow rate, and historical values of any observed parameter are examples of common independent variables.
Learn more about variable from
brainly.com/question/82796
#SPJ4
The symbols == and!= denote if something is equal or not. A variable is 0 negative when it has a minus sign before it.
A variable is something that can take on a variety of different values. A variable is a symbol. A variable in an experiment is something that can be changed. Because their values are studied during an experiment under the presumption or condition that they are dependent on the values of other variables according to a law or rule, they are known as dependent variables. In the context of the experiment in question, independent variables are those that are not considered as dependent on any other factors. Time, space, density, mass, fluid flow rate, and historical values of any observed parameter are examples of common independent variables.
Learn more about variable from
brainly.com/question/82796
#SPJ4
What are the 3 types of stakeholder participation?
The three categories of stakeholder engagement are consultation, information, and participation.
A conference or meeting when ideas are discussed or suggestions are given is referred to as a consultation. You might wish to contact with another doctor before consuming the proscribed fruit if one indicates your severe blueberry allergy has been resolved. . to convince them to comply with your requests. to decide how you will both behave, form a plan of action, a proposal, or promote a case jointly. Generally speaking, consulting positions may be classified into one of five major groups: strategy consulting, operations consulting, financial consulting, information technology consulting, and human resources consulting. Identification of the problem, analysis of the problem, application of the remedy, and assessment of the treatment are the four steps of problem-solving consultation. Baseline data are gathered throughout these phases, which also result in the development, execution, and evaluation of an intervention plan that is guided by the assessment.
learn more about consultation here
https://brainly.com/question/29342787
#SPJ4
the main reason that reits exist is to: ch21 a. create a tax loophole for wealthy investors b. allow shopping center owners to sell their properties in a down market c. make life complicated d. encourage capital formation within the real estate industry e. allow stock promoters to sell a real estate product with high commissions
The goal of a REIT, or real estate investment trust, is to direct money into the real estate market for the benefit of investors and capital growth.
Why do you use the word "shopping"?A client interacts in shop when they examine the products or services offered by one or more merchants with the possibility to buy a satisfactory selection of them.
Is buying things a life skill?Students often part in shopping for food activities in capacity building classes. A vital life skill to impart is the ability to shop. And the grocery store is where most folks do their main shopping.
To know more about Shopping visit:
https://brainly.com/question/14058717
#SPJ4
Why GATT is replaced by WTO?
After World War II, 23 nations signed the General Agreement on Tariffs and Trade (GATT), which entered law on January 1, 1948. The GATT was established to facilitate international trade. The GATT was included in the World Trade Organization (WTO) in 1995, extending it.
What is GATT?The General Agreement on Tariffs and Commerce is a legal agreement between several nations that attempts to promote international commerce by decreasing or eliminating trade barriers such as tariffs and quotas. Its stated purpose was to "substantially lower tariffs and other trade barriers, as well as abolish preferences, on a reciprocal and mutually beneficial basis." The GATT was established as a result of the failure of negotiating states to form the International Trade Organization during the United Nations Conference on Trade and Employment.
To learn more about GATT, click
https://brainly.com/question/14618803
#SPJ1
What information do you need to find marginal cost ?
The difference in total production costs caused by creating or producing one extra unit is known as the marginal cost in economics. Divide the variation in production costs by the variation in quantity to determine marginal cost.
How Does Marginal Cost Work?The difference in total production costs caused by creating or producing one extra unit is known as the marginal cost in economics. Divide the variation in production costs by the variation in quantity to determine marginal cost. Finding the point at which an organization can realise economies of scale to improve production and overall operations is the goal of marginal cost analysis. The producer may make money if the marginal cost of producing one extra unit is less than the price per unit.In managerial accounting, the idea of marginal cost is crucial because it may be used to maximize production through economies of scale within an organization. By producing at the point where marginal cost (MC) equals marginal revenue, a business can optimize its earnings (MR).
To know more about marginal cost visit:
brainly.com/question/7781429
#SPJ4
Is there any closed economy?
No, there is not. There are no closed economies which exist today.
It is unfeasible in modern society to assist a closed economy because the raw materials, such as crude oil, play a essential role as inputs to the final products. Most countries clearly do not have raw materials and are compulsory to import those commodities.
What is the most closed economy country?The most closed economy in the world is Brazil, which it imports the least amount of goods in the world if restrained as a portion of the gross domestic product (GDP). Actually, there are no economies which are completely closed, but some countries use protectionist rules to restrict trade, making them more closed than others.
India was also essentially a closed economy. Its large but inefficient industrial sector contributed 95 percent of domestic order for manufactured goods and 100 percent of all consumer goods, as a 1989 World Bank report stated.
Learn more about closed economy at: https://brainly.com/question/10074981
#SPJ4
which one of the following is not an example of the prevention costs of quality? group of answer choices costs associated with improving process design. procuring higher quality materials from suppliers to reduce defects. costs associated with honoring product returns and warranty claims. training all new employees in standard operating procedures.
End-process sampling is not an example of the prevention costs of quality.
Prevention costs are incurred to prevent product defects from occurring, and are part of the cost of quality. Prevention costs includes employee training with supplier certification. Generally, the greatest improvement in product quality is related to defect prevention. Although such prevention results in additional costs, such costs are usually more than offset by the savings associated with reduced damage.
Historically, it was believed that the total cost of quality (prevention, evaluation, internal failure, and external failure) would be minimized at some non-zero cost. However, this belief has been replaced by one that advocates a harmless policy. This new belief is based on the fact that small increases in prevention rates often result in significant decreases in failure rates.
For more such questions on prevention costs of quality:
https://brainly.com/question/28332501
#SPJ4
What are the 2 most common types of bank accounts?
When it comes to banking, there are two main types of accounts: savings and checking accounts.
A savings account is designed to help individuals save money and earn interest, while a checking account is designed to help individuals manage their money on a daily basis.
Savings accounts are a type of bank account that typically offer higher interest rates than checking accounts, but come with certain restrictions, such as minimum balance requirements and limited access to funds.
Checking accounts, on the other hand, allow for more flexibility and access to funds, but typically offer lower interest rates. Deciding which type of account is best for you depends on your individual needs and goals.
To learn more about bank, click here:
https://brainly.com/question/25642105
#SPJ4
business transactions that involve entities from two or more countries are defined as: transcontinental business. expansive business. multilateral business. international business. widespread business.
Business transactions that involve entities from two or more countries are defined as international business.
What kinds of business transactions are there?The definition of an image outcome for commercial dealings involving parties from two or more nations .There are three different forms of business transactions based on the exchange of money: cash transactions, non-cash transactions, and credit transactions.Any form of agreement involving participants from at least two different nations is considered an international commercial transaction. International commercial agreements involve people, small and huge multinational businesses, and even whole nations. These transactions include sales, leases, licensing, and investments.The transfer of commodities, services, technology, capital, and/or information across national borders and on a global or transnational scale is referred to as international business. Cross-border exchanges of products and services between two or more nations are involved.
To learn more about business transactions refer to:
https://brainly.com/question/17201601
#SPJ4
Which phases of the software development life cycle SDLC can be automated?
The testing environment is the automation phase that is most frequently advised. Organizations use the SDLC, a structured framework, to produce software.
Teams can test applications of the software to ensure that they perform as intended by reporting, tracking, and resolving defects until they meet the required criteria. Therefore, it is time-consuming to manually analyze each component of the programme to identify the bug's location.. SDLC Phases such as requirement collecting, analysis, design, development, testing, integration, deployment, and maintenance are all included. The fact that the testing tools include a reusability feature is one of its advantages. It reduces time by allowing for instant adoption at different application regions. Additionally, accuracy and efficiency are increased due to the reduction in manual human input. As a result, automating testing improves developer efficiency while also producing effective feedback and new features.
learn more about SDLC here:
https://brainly.com/question/9977671
#SPJ4
Several phases of the Software Development Life Cycle (SDLC) can be automated to streamline and enhance the development process. Here are some phases that are commonly automated:
Requirements Gathering and Analysis: Automation tools can assist in capturing, documenting, and analyzing requirements. These tools can facilitate collaboration, traceability, and requirement management.
Design and Modeling: Automated tools can be utilized to create visual models, such as UML diagrams, to represent the system's structure, behavior, and relationships. These tools often offer features for automated code generation from models.
Coding and Implementation: Integrated Development Environments (IDEs) provide automated features like code completion, syntax highlighting, refactoring, and debugging, which help developers write and test code more efficiently.
Testing: Test automation tools allow for the creation and execution of automated tests, including unit tests, integration tests, and regression tests. These tools help identify defects, improve test coverage, and support continuous testing.
Deployment and Release: Continuous Integration/Continuous Deployment (CI/CD) pipelines automate the build, testing, and deployment processes. This automation ensures consistent and reliable releases of software.
Know more about Software Development Life Cycle here:
https://brainly.com/question/30089248
#SPJ11
What is the similarities between data life cycle and data analysis process?
The similarities between the data life cycle and the data analysis are as follows are both are concerned with examination of data, both are data science processes and both have a goal to draw inferences based on the given data set.
The process by which specific data moves from creation or collection to storage and/or deletion at the end of its useful life is known as data lifecycle. Since the rise of big data and the continued growth of the Internet of Things, data lifecycle management (DLM) has become important.
Globally, more and more gadgets generate huge amounts of data. It is important to maintain proper control over the data throughout its life cycle to maximize the value of the data and reduce the risk of errors. Finally, expired data should be archived or deleted to prevent it from using more resources than necessary.
To know more about Data life cycle here-
https://brainly.com/question/26952504
#SPJ4
The A machine have an hourly operating cot of $10 each, B machine have an hourly operating cot of $11 each, and C machine have an hourly operating cot of $12 each. Which alternative would be elected, and how many machine, in order to minimize total cot while atifying capacity proceing requirement?
In order to minimize total cost while satisfying capacity processing requirement, the alternative that should be elected is a combination of A and B machines.
What is total cost?Total cost is the sum of all the costs associated with a purchase, project, or undertaking. This includes the cost of the materials, labor, overhead, taxes, and any other related expenses. Calculating total cost can help businesses make informed decisions about their spending and ensure that they are making investments that are cost-effective and beneficial to their bottom line. Total cost also helps individuals make decisions about their own spending, such as when deciding whether to make a purchase or if they can afford a certain item. For example, if a person is considering buying a car, they would need to calculate the total cost of the car, including taxes, registration fees, insurance, financing, and maintenance. Knowing the total cost can help them decide if the purchase is within their budget.
The total cost of using A and B machines would be $21 ($10 for A and $11 for B). The cost of using C machines would be $12, but since C machines have a higher operating cost than the other two machines, the cost of using C machines would be higher than using A and B machines to satisfy the capacity processing requirement. Therefore, using a combination of A and B machines would be the best choice in order to minimize total cot while satisfying capacity processing requirement.
To learn more about total cost
https://brainly.com/question/26171624
#SPJ4
Tickets to a play cost $4 in advance and $5 at the door. The theater club wants to raise at least $400 from the ticket sales. Write an inequality for the number of tickets in advance, x, and the number of tickets at the door, y, that the theater club needs to sell. If the club sells 40 tickets in advance, what is the least number of tickets they need to sell at the door to reach their goal?.
As per the given inequality, the least number of tickets they need to sell at the door to reach their goal is 48.
Here we have given that Tickets to a play cost $4 in advance and $5 at the door. The theater club wants to raise at least $400 from the ticket sales and we need to find the the least number of tickets they need to sell at the door to reach their goal
While we looking into the given question, we have knw that there are two types of ticket 5 and 4.
So, here le us consider that the number of door tickets = x and the number of advance tickets = y which is 40
Then we have to create a system of equations as
=> 5x + 4y ≥ 400 - - - - - - - - (1)
Apply the value of y as 40, then we get
=> 5x + 4(40) ≥ 400
=> 5x + 160 ≥ 400
When we simplify this one then we get,
=> 5x ≥ 400 - 160
=> 5x ≥ 240
Divide both side by 5, then we get
=> x ≥ 48
So, here they need to sell 48 tickets at the door.
To know more about inequality here
https://brainly.com/question/17068081
#SPJ4
If a rights offer is used as the means of funding a positive net present value project, then shareholders should expect the price of their shares to?
If a rights offer is used as a means of funding a positive net present value project, then shareholders should expect the price of their share to increase due to the increased value of the issuing firm.
A rights offering (rights issue) is a set of subscription warrants that are made available to current shareholders in an amount corresponding to their current ownership. These are regarded as a sort of option since they provide stockholders of a firm the opportunity, but not the duty, to buy additional shares of the business.
The subscription price at which each share may be purchased in a rights offering is often lowered in relation to the current market price. As just an outcome, the holder can often sell their privileges on the market.
To learn more about right offering link is here
brainly.com/question/28497545
#SPJ4
The right question is:
If a rights offer is used as a means of funding a positive net present value project, then shareholders should expect the price of their share to:
(a) remain constant as the value of the project will be offset by the issuance of the new shares
(b) decrease due to the additional shares being offered
(c) change but the directions of that change cannot be predicted
(d) change in direct relation to the change in the book value per share
(e) increase due to the increased value of the issuing firm
Why should an entrepreneur always keep improving his product service?
An entrepreneur should constantly look for methods to improve his product services in order to attract more clients. For a business to expand, it is crucial to create new goods and services.
What is marketing?The term marketing refers to the actions a company takes to promote the acquisition or sale of a good or service. Delivering goods to clients or other companies involves marketing initiatives like sales and promotion. On occasion, affiliates will handle marketing for a company. Marketing and promotion staff members work to use advertising to catch the attention of important target markets. Aiming at certain audiences, promotions can include celebrity endorsements, catchy slogans or taglines, attractive packaging or graphic designs, and widespread media exposure.
To know more about Marketing visit:
brainly.com/question/29775565
#SPJ4
What are the 3 conditions for making a causal inference?
Covariation, temporal precedence, and control over "third variables" are the three prerequisites for causality. The latter include different theories to account for the detected causal link.
What are the three criteria for determining Covariation?
You must demonstrate three things in order to establish causality: that X occurred before Y; that the observed association between X and Y wasn't the result of pure chance; and that there is no other explanation for the relationship between X and Y.What are the three requirements for internal validity inference?
Three conditions must be met in order for a causal inference to be considered valid: the "cause" must occur before the "effect" in time (temporal precedence); the "cause" and the "effect" tend to occur together; and there must be no convincing alternate explanations for the observed covariation (nonspuriousness).
Learn more about Covariation here:
https://brainly.com/question/2618552
#SPJ4
What do you text when a customer is running late for delivery?
Be sure to first apologize sincerely and offer an explanation for the delay. Offer an incentive or discount for upcoming purchases next. Finally, ask customers for their opinions so you may improve your delivery process going forward.
How do you respond to a customer who is upset because their lunch delivery was delayed?A sincere apology in advance can help to diffuse tense customers. Sending them a sincere apology by email or SMS shows them that you are aware of the issue and are empathetic to any inconvenience it may have caused, even if the unexpected delay was not your company's responsibility.
A customer should be notified of a delivery delay in what way?We sincerely apologize for any trouble our delayed delivery of the products you ordered from us has caused. Production department mistakes are to blame for this annoyance. The additional large number of unexpected orders we've received this month has also added to the delay.
Learn more about delayed delivery: https://brainly.com/question/29555753
#SPJ4
if an insurance company encourages its salespeople to intentionally mislead potential customers about damage from flooding due to hurricane damage, who could be susceptible to legal action for the deceptive practice?
Legal action for the fraudulent practise may be available against the company and the salesperson.
What are the different categories of insurance frauds ?Because it is a highly obvious and particular type of robbery, insurance fraud is a serious scam. Any step of the process, from looking for an insurance agent to submitting an insurance claim, can result in insurance fraud, and it can happen to any of the persons involved. These parties comprise the applicants, third-party claimants, policyholders, insurance brokers, those who help claimants with their needs, and in some situations, even the insurance companies themselves.By checking and making sure that you work with certified insurance brokers, you may protect yourself from such frauds. Before you send them any money, look into their previous clients and background. Regularly review your policy to ensure that the information is accurate and unaltered. As you get older, it's critical to manage your insurance plans carefully and safely.To learn more about insurance refer :
https://brainly.com/question/26285319
#SPJ4
what are the two primary philosophies discussed under operations management that are used to help manage operations in the supply chain. provide the main objectives for each of the two philosophies.
The following are the two main management philosophies for supply chain operations:
Just in time philosophy Lean PhilosophyWhat is Operation management?Planning, and redesigning any production for goods or services as well as operations are the main objectives of the management discipline known as operations management. In its most basic form, operations management is the administration of company activities with the aim of attaining goals, boosting productivity, and optimizing profitability.
In its most basic form, operations management is the administration of company activities with the aim of attaining goals, boosting productivity, and optimizing profitability. The management of business procedures to achieve the best degree of productivity within an organization is known as operations management (OM).
To know more about Operation management, visit:
https://brainly.com/question/15649182
#SPJ4
The five broad categories of BI/analytics techniques include
a. heuristics, predictive analytics, simulation, data mining, and linear programming b. optimization, descriptive analytics, and text and video analysis, simulation, and predictive analytics c. regression analysis, data mining, Monte Carlo simulation, optimization, and time series analysis d. predictive analysis scenario analysis, image analysis, optimization, and regression analysis
The five broad categories of BI/analytics techniques include a. heuristics, predictive analytics, simulation, data mining, and linear programming
What are the five broad categories of BI/analytics techniques?Heuristics are methods for solving problems that involve using general rules of thumb or common sense, rather than precise or rigorous methods. Predictive analytics is the use of data, statistical algorithms, and machine learning techniques to identify patterns and trends in data, and to make predictions about future events.
Simulation is the use of computer models to represent and analyze real-world systems or processes. Data mining is the process of extracting useful information from large sets of data using statistical and machine learning techniques.
Linear programming is a mathematical method for optimizing a linear objective function, subject to linear constraints. It is often used in business and economics to solve problems related to resource allocation and decision-making.
Find out more on analytics techniques at https://brainly.com/question/13220961
#SPJ1
What to do if you fail an assessment?
Avoid panic. A failing grade can be shocking whether you've always done well in school or even if you haven't.
How do you pass assessment test?Plan beforehand. Prior to the exam, make sure you obtain a full night's sleep and are aware of your obligations.understand what an evaluation comprises. Make sure you are aware of the assessment's components and what you will be expected to perform for each one.simulated IQ exams.Permitting yourself to feel is important.Develop self-compassion.Consider what happened and develop a growth mindset.Review your objectives and make a future plan.Avoid panic. A failing grade can be shocking whether you've always done well in school or even if you haven't.Plan ahead. Attend office hours.To learn more about assessment' refer,
https://brainly.com/question/24690729
#SPJ4