Two loudspeakers emit sound waves of the same frequency along the x-axis. The amplitude of each wave is a. The sound intensity is minimum when speaker 2 is 10 cm behind speaker 1. The intensity increases as speaker 2 is moved forward and first reaches maximum, with amplitude 2a, when it is 30 cm in front of speaker 1. What is What isThe amplitude of the sound (as a multiple of a) if the speakers are placed side by side?
Answers
Answer:
Explanation:
To find the amplitude of the sound, we must first determine the wavelength and the phase difference between the two speakers.
For the wavelength;
Recall that, the separation between two successive max. and min. intensity points are [tex]\dfrac{\lambda}{2}[/tex]
Thus; for both speakers; the wavelength of the sound is:
[tex]\dfrac{\lambda}{2} = (10+30) cm[/tex]
[tex]\dfrac{\lambda}{2} = (40) cm[/tex]
λ = 80 cm
The relation between the path difference(Δx) and the phase difference(Δ∅) is:
[tex]\Delta \phi = \dfrac{2 \pi}{\lambda}\Delta x + \Delta \phi_o[/tex]
where;
Δx = 10 cm
λ = 80 cm
Δ∅ = π rad
∴
[tex]\Delta \phi = \dfrac{2 \pi}{\lambda}\Delta x + \Delta \phi_o[/tex]
[tex]\pi \ rad = \dfrac{2 \pi}{80 \ cm}(10 \ cm) + \Delta \phi_o[/tex]
[tex]\pi \ rad = \dfrac{2 \pi}{8}+ \Delta \phi_o[/tex]
[tex]\pi \ rad = \dfrac{ \pi}{4}+ \Delta \phi_o[/tex]
[tex]\Delta \phi_o = \pi -\dfrac{ \pi}{4}[/tex]
[tex]\Delta \phi_o = \dfrac{ 4\pi - \pi}{4}[/tex]
[tex]\Delta \phi_o = \dfrac{ 3\pi}{4} \ rad[/tex]
Suppose both speakers are placed side-by-side, then the path difference between the two speakers is: Δx = 0 cm
Thus, we have:
[tex]\Delta \phi = \dfrac{2 \pi}{\lambda}\Delta x + \Delta \phi_o[/tex]
[tex]\Delta \phi = \dfrac{2 \pi}{\lambda}(0 \ cm ) + \dfrac{3 \pi}{4} \ rad[/tex]
[tex]\Delta \phi = \dfrac{3 \pi}{4} \ rad[/tex]
∴
The amplitude of the sound wave if the two speakers are placed side-by-side is:
[tex]A = 2a \ cos \bigg (\dfrac{\Delta \phi }{2} \bigg)[/tex]
[tex]A = 2a \ cos \bigg (\dfrac{\dfrac{3 \pi}{4} }{2} \bigg)[/tex]
[tex]A = 2a \ cos \bigg ({\dfrac{3 \pi}{8} } \bigg)[/tex]
A = 0.765a
The expressions for sound interference allows to find the amplitude for the wave when the two speakers are together is:
The amplitud is: A = 0.765a
Given parameters
Minimum interference speaker 2 behind speaker 1 is: Δr₁ = 10 cm Maximum interference haughty 2 in front of speaker 1 Δr₂ = 30 cmTo find
The amplitude if the speakers are side by side.
The interference phenomenon occurs when two coherent waves have paths of different lengths to reach a point, we have two extreme cases:
Constructive. When the waves arrive in phase, the expression is:Δr = [tex]2n \ \frac{\lambda}{2}[/tex]
Destructive. When the waves arrive with a phase difference of 180º, the expression isΔr = [tex](2n+1) \ \frac{\lambda}{2}[/tex]
Where Δr₁ and Δr₂ are the path difference, λ is the wavelength and n is an integer.
Let's start by looking for the wavelength that the speakers emit, see attached.
Destructive Interference Δr₂ = (2n + 1) la / 2
Constructive interference Δr₁ = 2n lam / s
Let's solve the system.
Δr₂ - Δr₁ = [tex]\frac{\lambda}{2}[/tex]
Let's calculate
30 - (-10) = [tex]\frac{\lambda}{2}[/tex]
λ = 80 cm
Now we can use the general relation for the path change and the phase.
[tex]\frac{\delta r}{\lambda } = \frac{\phi - \phi_o}{2\pi }[/tex]
[tex]\phi = \frac{\Delta r \ 2\pi }{\lambda } + \phi_o[/tex]fi = Dr 2pi / lam + fio
Where [tex]\phi[/tex] is the possible initial phase difference between the speakers.
Let's find the initial phase difference emitted by the two speakers, let's use destructive interference, for which the phase difference is:
[tex]\phi = \pi \ rad[/tex]
Let's calculate
[tex]\pi = \frac{2\pi }{80} \ 10 + \phi_o \\\phi_o = \pi - \frac{\pi}{4}[/tex]
[tex]\phi_o[/tex] = ¾ [tex]\pi[/tex] rad
This value is kept constant, let's find the phase angle for when the speakers are together, so the path difference is zero Δr = 0
[tex]0= \frac{\phi - \phi_o}{2\pi }\\\phi = \phi_o[/tex]
[tex]\phi[/tex] = ¾ pi
The amplitude of the sound wave is
A = 2a cos [tex]\frac{\phi}{2}[/tex]
A = 2a cos ⅜ π
A = 0.765 a
In conclusion using the expression for sound interference we can find the amplitude for the wave when the two speakers are together is:
A = 0.765a
Learn more here: brainly.com/question/14006922
Related Questions
A force of 100 N is applied to a crate at an angle of 60° to the horizontal surface. The force causes the crate to move 2 m across the floor. How much work is done on the crate?
a. 50 J
b. 100 J
c. 200 J
Answers
Answer: B 100 J
Explanation: Pic Attached. Hope This Helps.
Question 6 of 10
What is the frequency of a wave that has a wavelength of 0.20 m and a speed
of 22 m/s?
A. 4.4 Hz
B. 110 Hz
C. 0.23 Hz
D. 0.001 Hz
Answers
Answer: Try A. 110 Hz
Explanation:
Answer:
i got 110 Hz..
Explanation:
A bicycle of mass m requires 50 J of work to move from rest to a final speed v. If the same amount of work is performed during the same amount of time on a bicycle with a mass of 2m, what is the final speed of the second bicycle?
Answers
Answer:
The final speed of the second bicycle is (v·√2)/2
Explanation:
The mass of the given bicycle = m
The amount of work required to move the bicycle from rest to speed v = 50 J
The final speed of the first bicycle = v
The mass of the second bicycle = 2m
Therefore, from conservation of energy, we have;
Work required by the first bicycle = Kinetic energy gained by the bicycle
The kinetic energy = 1/2·m·v²
∴ Energy required by the first bicycle = 50 J = 1/2·m·v²
Given that the same amount of work is performed on the second bicycle, we have;
Work performed on the second bicycle = 50 J = kinetic energy of second bicycle = 1/2·(2·m)·v₂²
Also, given that 50 J = 1/2·m·v², we have;
Work performed on the second bicycle = 50 J = 1/2·m·v²= 1/2·(2·m)·v₂²
1/2·m·v²= 1/2·(2·m)·v₂²
m·v² = 2·m·v₂²
v² = 2·v₂²
v₂ = √(v²/2) = v/√2 = (v·√2)/2
v₂ = (v·√2)/2
The final speed of the second bicycle = v₂ = (v·√2)/2.
Place the items in the correct order when they occur from 1 to 5.
A. Erosion of rock
B. Particles settle out and form layers
C. Humans analyze formations to determine the age of rock
D. Sediments are distributed by river to a new location
E. Fossils form as living things are trapped in the layers
Answers
Explanation:
A. Erosion of rock
D. Sediments are distributed by river to a new location
B. Particles settle out and form layers
E. Fossils form as living things are trapped in the layers
C. Humans analyze formations to determine the age of rock
The steps given are keys which ensures we understand how sediments form sequentially in basin of deposition. Coupled with this, we are shown a peep into the world of fossilization.
Any form of rock is first eroded before they are transported to their basins of deposition. In the basin, the particles settle out and form layers. The fossils trapped in them also settles out. The sediments gets compacted to sedimentary rocks. This sequence is therefore analyzed to determine the age of a rock.The Earth's diameter at the poles is _____.
equal to its diameter at the equator
greater than its diameter at the equator
less than its diameter at the equator
Answers
Answer:
less than its diameter at the poles
hope this helps. have a great day! :)
A wave has a wavelength of 45 meters and a period of 9.0 seconds. What is the frequency of the wave?
405 Hz
5.0 Hz
5.0 m/s
0.11 Hz
Answers
Answer:405
Explanation:Multiply 45x9.0=405
Answer:
405 Hz
Explanation:
Give the person on top Brainly
why the unit of power is called derived unit?
Answers
How does temperature influence chemical change
Answers
Answer:
yes
Explanation: if temperature is higher the reactants have more kinetic energy make the chemical reaction faster
Answer:
increasing the temperature will cause chemical changes to occur faster
Decreasing the temperature, causes the particle to lose energy which causes them to move around less and slower
The path in which the current flows is
A.
Open
B.
Closed
C.
Semi opened
D.
Semi closed
E.
None of the above
Answers
Answer:
B. closed
Explanation:
Charges flow through a closed path called a circuit. Current flows because negatively charged particles are attracted to positively charged particles at the other end of the circuit.
Hope this helped, Have a Wonderful Day!!
Here is the picture of an aircraft, with the forces working on it shown. Identify the force that corresponds to the question mark.
A. Buoyancy
B. Atmospheric pressure
C. Gravity
D. Density
Answers
explanation- it just usb
The force corresponds to the question mark in the given figure is known as Gravity. Hence, option (C) is correct.
The given problem is based on the concept of equilibrium of forces. The forces that causes the net motion of an object to be zero, is known as equilibrium of force.
In the given problem, the lift of an aircraft will be due to the Buoyant force due to the air as a medium. The drag acting the opposite direction of motion of aircraft, tends to resist the motion. The thrust force acting on the aircraft is due to the component of aircrafts, which causes the aircraft to move forward.And the question mark shown in problem is somehow pointing the gravitational force, which always acts in downward direction. And gravitational force highlights the gravity.Thus, we can conclude that the force corresponds to the question mark in the given figure is known as Gravity. Hence, option (C) is correct.
Learn more about the gravity here:
https://brainly.com/question/21454806
Do you think the government should ever get involved in limiting population? Why or why not?
Answers
Answer:
No!!
Explanation: I think the government shouldn't get involved with limiting population!! i think that as long as you can care and supply your family it is your choice how larger your family is!
A bus goes from rest to 20 m/s. The bus accelerates at 2 m/s^2. How far does the bus go?
Answers
9) Zane has an elastic water balloon launcher that can fire balloons at an angle of [38.0o] from the surface of the ground. If the initial velocity is 25.0 m/s, find how far away are the balloons are from the launcher when they hit the level ground again.
Answers
Answer:
127.6 m
Explanation:
Given that Zane has an elastic water balloon launcher that can fire balloons at an angle of [38.0o] from the surface of the ground. If the initial velocity is 25.0 m/s,
The horizontal initial velocity will be:
U = 25cos38
U = 19.7 m/s
To find how far away are the balloons are from the launcher when they hit the level ground again, we will first calculate the total time spent before using the range formula
To calculate the total time, let's use the formula below:
T = 2U/g
T = (2 × 25)/9.8
T = 50/9.8
T = 5.1s
Range = UT
Since horizontal acceleration = 0
Range = 25 × 5.1
Range = 127.55 m
Therefore, the balloons are approximately 127.6m away from the launcher when they hit the level ground again
Compared to the inertia of a 2.0 kg ball, the inertia of a 4.0 kg ball is
A) Half as great
O B) twice as great
the same
OD) four times as great
Answers
A person or object may have stored energy because of its
Answers
Answer:
A person or object may have stored energy because of its....
potential energy
A person or object may have stored energy because of its position and the energy is called potential energy.
What is potential energy?The relative positions of different system components determine the potential energy, which is stored energy. When a spring is compressed or stretched, its potential energy increases.
If a steel ball is raised above the ground as opposed to falling to the ground, it has more potential energy. It is capable of performing more work when raised.
Potential energy is a characteristic of systems rather than of particular bodies or particles; for instance, the system made up of Earth and the elevated ball has more potential energy as they become further apart.
In systems having components whose forces on one another rely on their configuration, or relative positions to one another, potential energy is generated.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ6
How does the change in the state of matter occur? Write with example
Answers
Answer:
When matter changes from one state to another, it either absorbs energy—as when chocolate melts—or loses energy. For example, if you were to place the melted chocolate in a refrigerator, it would lose energy to the cold air inside the refrigerator. As a result, the liquid chocolate would change to a solid again.
Explanation:
hope it helps u
who wants to be my freind
Answers
Meeeeeeeee............!
An object needs a force of 152 Newtrons to move 8 meters. How much work is required?
Answers
Answer:
960J
Explanation:
Given parameters:
Force = 120N
Distance = 8m
Unknown:
Work required = ?
Solution:
The work done by a body is the force applied to move a body in a specific direction.
Work done = Force x distance
Insert the parameters and solve;
Work done = 120 x 8 = 960J
Where can I find springs that are the same size as the ones in a mechanical pencil
Answers
Answer:
Staples, Bestbuy, Maybe Homedepot
Explanation:
Answer:
find the mechanical pencil on amazon
Explanation:
amazon has everything!
HOPETHIS HELPS!
brailiest? please....
What happens if you cut a bar magnet in half between the north and south poles?
A. one half has a north pole and one half has a south pole
B. Each half is stronger magnet than the original magnet
C. Each half has both a north pole and a south pole
D. The two halves are no longer magnetic
Answers
c is the correct answer ......... if we cut a magnet i will divide into two halves and ecah half have a southpole and northpole.
Hope it helps
When a bar magnet is cut in half, each half has both a north pole and a south pole. Therefore, option C is correct.
This phenomenon is due to the rearrangement of magnetic domains within the material. The newly formed magnets will have a north pole on one end and a south pole on the other end. This process can be repeated, resulting in smaller and smaller magnets, but each piece will always exhibit both north and south poles.
The magnetic properties are retained even when the magnet is divided into smaller segments. Each half of the magnet becomes a new magnet with its own north and south pole.
Learn more about bar magnets, here:
https://brainly.com/question/3333440
#SPJ2
What simple machines are in a remote controlled drone helicopter?
Answers
Answer:
The machines included in a remote controlled drone helicopter are:
Brushless MotorsBluetooth device connectorBatteriessmall Camera(if needed)LCD Flight control boardThe radius of wheel is 20 cm & that of axle is 5 cm in a wheel & axle. Calculate the velocity ratio of the machine. please help!!
Answers
Answer:
180 cm, what
2. The triangular side walls of a flyover have been used for advertisements. Theses
the walls are 122 m, 22 m and 120 m (see Fig. 12.9). The advertisements a
earning of 5000 per m per year: A company hired one of its walls for 3 months
much rent did it pay
Explanation:
What is the difference between scalar and vector quantity?
Answers
Answer: A scalar quantity has magnitude but no particular direction and a vector quantity has magnitude and acts in a particular direction.
Explanation:
The energy stored inside a battery is best described as...
a. potential energy
b. Elastic
c. Mechanical
d. Kinetic
Answers
Answer:
potential energy
Explanation:
by the sun
Which of these structures is the most superior?
the mouth
the adam's apple
the belly button
the nose
Answers
When lifting weights, arch your lower back for extra strength. Is this true?
Answers
Answer:
No
Explanation:
In what ways is thermal energy transferred during physical and chemical changes
Answers
Explanation:
chemical changes
>produce new substances w/ different chemical structure/ properties
> thermal energy can be used to BREAK bonds (endothermic)
>thermal energy can be transferred to a chem rxn to help form new products (endothermic)
> heat can be released by an exothermic chemical reaction (excess energy- the total energy used to break bonds is less than energy released in forming new bonds)
physical changes
>does not result in new substances (typically changes in state- solid, liquid, gas)
> thermal energy can be transferred to EVAPORATE water (add thermal E... water (liquid) to steam (gas)) or FREEZE water (remove thermal E... water (liquid) to ice (solid))
What is the mass of a dog running at a speed of 5 m/s and a momentum of 120.5 kgm/s?
Answers
Given:
Momentum of the dog (p) = 120.5 kg m/s
Speed of the dog (v) = 5 m/s
To Find:
Mass of the dog (m)
Concept/Theory:
[tex] \underline{\underline{ \bf{\Large{Momentum}}}}[/tex]
It is defined as the quantity of motion contained in a body.It is measured as the product of mass of the body and it's speed.It is represented by p.It's SI unit is kg m/sMathematical Representation/Equation of Momentum: [tex] \boxed{ \bf{p = mv}}[/tex]Answer:
By using equation of momentum, we get:
[tex] \rm \longrightarrow m = \dfrac{p}{v} \\ \\ \rm \longrightarrow m = \dfrac{120.5}{5} \\ \\ \rm \longrightarrow m = 24.1 \: kg[/tex]
[tex] \therefore [/tex] Mass of the dog (m) = 24.1 kg
which component acts a platform on which an application software runs.
Answers
Answer:
System software acts as a platform on which an application software program runs.
Can someone please help. I need to turn it in soon. Thanks.