There are some ways objects in motion are affected. _______________, or pushes and pulls, affect the motion of an object. _______________ is a force that pulls objects down to Earth. _______________ is a force that slows things down or can even make them stop. Did you know acceleration means more than the increase of an object’s speed? It also describes an object that is slowing down or changing _______________. Since acceleration is a change in speed or direction, that means, _______________ is a change in velocity

Answers

Answer 1

Answer:

Forces, Gravity, Friction, Direction, Acceleration.

Answer 2

The answers for the fill-in-the-blanks would be  Force, gravity friction

direction and acceleration respectively.

What is gravity?

It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another,

There are a few ways that moving objects are impacted. Pushes and pulls, or force, have an impact on how an object moves.

The force of gravity drags items toward the Earth.

Friction is a force that causes objects to move more slowly or even come to a stop.

It also applies to an item that is reversing course or slowing down. Since acceleration is a change in velocity, it can also be a change in speed or direction.

Thus, Force, gravity friction direction, and acceleration are the answers respectively.

Learn more about gravity from here,

brainly.com/question/4014727

#SPJ2


Related Questions

Which wave must have a medium to travel?
A) light wave
B)compression wave
C) electromagnetic wave
D) ultraviolet wave

*****Urgent****

Answers

Letter B

without a medium, there is nothing to compress, hence, no wave. A fast- medium like a gas (air) is easy to compress and allows waves to move through it easily. a slow medium, like a liquid, is still pretty fast, but not as fast as air.

The answer is A good luck !

If a balloon has 12 electrons on its surface but also 13 protons, what
is the net charge on the balloon?

Answers

Answer:

q = 1

Explanation:

Given that,

No. of electrons = -12

No. of protons = 13

We need to find the net charge on the balloon. We know that net charge is equal to the sum of proton and the electrons such that,

Net charge = No. of electrons + no. of protons

= -12 + 13

= 1

So, the net charge is equal to 1.

Which is a pollutant associated with high-tech gadgets in landfills?
A. Chromium
B. Steel
C. Carbon Dioxide
D. Hydrogen

Answers

Answer:

The answer of this is question is A.

Answer:

A.

Explanation:

sana makatulong po ❤❤

which process is the source of most oxygen in the atmosphere

Answers

Answer:

photosynthesis

The air that enters human lungs contains about 21 percent oxygen. The process responsible for producing most of the Earth's oxygen is known as photosynthesis. In this process, plants and certain other organisms convert sunlight into oxygen and other products.

Explanation:

Hope it helps! Correct me if I am wrong!

I'm sure about my answer!

If you dont mind can you please mark me as brainlest?

Its ok if you don't want to!

But i hopefully it helps you!

Answer:

Photosynthesis I think

Explanation:

If you cause the surfaces between two touching objects to change, how will the friction be affected?

Answers

Friction occurs because the microscopic hills and valleys of two touching surfaces increases. Describe how the amount of force pushing two surfaces together affects friction. As the force pushing two surfaces together increases, the friction between the surfaces increases. Hope this helps! Mark brainly please!

what is the density of a iphone with a mass of 200g and a volume of 40cm3

Answers

Answer: 5 gm/cc

Explanation:

200 gm/40 cc
= 5 gm/cc

Joni plays a scale on her clarinet. As she plays from low notes to high notes, what happens to the sound waves that the clarinet creates?

Answers

Answer:

The answer is "The frequency of the sound waves increases".

Explanation:

Its most oscillating their frequency waves, therefore higher the vibration we hear. However you see, sound frequency is determined through the oscillation of electrical signals while moving to our ears, which implies that perhaps the audio medium, which usually is air, makes a distinction between compression to spreading. It's the end of the communication as the frequency rises.

Calculate V1 and V2 ( V = voltage )
Given that Vs = 16V, R1 = 330Ω, and R2 = 470Ω
Please do not answer if you don't know how to do this

Answers

Question:

Calculate V1 and V2 ( V = voltage )

Given that Vs = 16V, R1 = 330Ω, and R2 = 470Ω

Solution:

Given that,

Vs = 16VR1 = 330ΩR2 = 470Ω

.°.

V1&V2↷

Firstly, we'll find the Total resistance of the circuit

=> 330Ω + 470Ω =800Ω

Now, we'll use the ohm's law to calculate the current flow in the circuit

Vˢ= IRᵀ

[tex]I= \frac{16}{800} = > \frac{1}{50}[/tex]

= 1/50 Ampere

Now,

V1 = IR

[tex]v1 = \frac{1}{50} \times 330 = > 6.6 \: Volt\ \\ v2 = \frac{1}{50} \times 470 = > 9.4 \: Volt[/tex]

______

Hope it helps

-------☆゚.・。゚ᵴɒƙυᴚᴀ_ƨȶäᴎ❀

Consider again the civilization described in the previous question. (They live on a planet orbiting 10 AU from a close binary star system that consists of a 15 MSun red giant star and a 10 MSun black hole surrounded by an accretion disk.) Through a bizarre (and scientifically unexplainable) fluctuation in the space-time continuum, a copy of a book from that civilization arrives on your desk; it is entitled Iguoonos: How We Evolved. In the first chapter, you learn that these beings evolved from organisms that lived 5 billion years ago. Which of the following statements should you expect to find as you continue to read this book?
A. Their immediate ancestors were chimpanzees.
B. As a result of traumatic experiences to their evolutionary ancestors, they dislike television.
C. They evolved on a different planet in a different star system, and moved to their current location.
D. They evolved from primitive wormlike creatures that had 13 legs, 4 eyes, and bald heads, thus explaining why such critters are now considered a spectacular delicacy.
E. They believe that the presence of two stars in their system was critical to their evolution.

Answers

Fysbsts dydbdysj dudgts offhand fidydh jdgdhd

Consider the electric force between a pair of charged particles a certain
distance apart. By Coulomb's Law:
If the charge of one of the particles is doubled, the force is:
(unchanged), (halved), (doubled), (quadrupled)

Answers

Answer:

Doubled

Explanation:

F = (kq1q2) / r^2

F and q (Either q1 or q2) are directly proportional, so double the charge would also double the electruc force between the charges.

A person pushes a 125 kg object initially at rest on a frictionless surface. The object ends up with a final velocity of 1.40 m/s. What is the total
translational kinetic energy of the object?

Answers

Answer:

a person pushes a 125 kg

Explanation:

The total translational kinetic energy of the object is 122.5 J.

What is meant by kinetic energy ?

Kinetic energy is defined as the energy possessed by a body by virtue of its motion.

Here,

Mass of the object, m = 125 kg

The final velocity of the object, v = 1.4 m/s

It is given that the object was initially at rest on a frictionless surface. When the object was pushed by the person, it gained some amount of kinetic energy and ended up with a final velocity of 1.4 m/s.

So, the expression for total translational kinetic energy of the object is given by,

KE = KEf + KEi

KE = 1/2m(v² + u²)

Since, the object was initially at rest, the initial velocity,

u = 0

Therefore, the kinetic energy of the object,

KE = 1/2 mv²

KE = 1/2 x 125 x (1.4)²

KE = 122.5 J

Hence,

The total translational kinetic energy of the object is 122.5 J.

To learn more about kinetic energy, click:

https://brainly.com/question/17143873

#SPJ2

What does fissure and conduit have in common?

Answers

Answer:

although commons their deposits can dense

1. An object of mass 300 kg is observed to
accelerate at the rate of 1 m/s. Calalate the
force required to produce this acceleration.

Answers

Answer:

The force required will be "300 N".

Explanation:

The given values are:

Mass of object,

m = 300 kg

Acceleration,

a = 1 m/s

Now,

The force will be:

⇒  [tex]F=m\times a[/tex]

On substituting the values, we get

⇒      [tex]= 300\times 1[/tex]

⇒      [tex]=300 \ N[/tex]

How would an object’s kinetic energy change if it’s mass decreased by a factor of 3 and it moved 6 times faster?

Answers

Answer: Decreases in mass cause decreases in kinetic energy due to the aforementioned positive relationship between the two. Therefore when mass is decreased, an increase in kinetic energy is possible if velocity increases.

Answer:: Decreases in mass cause decreases in kinetic energy due to the aforementioned positive relationship between the two.

How energy is converted from one form to other

Answers

Explanation:

Energy can be converted from one form to another. Examples: Gasoline (chemical) is put into our cars, and with the help of electrical energy from a battery, provides mechanical (kinetic) energy. ... Similarly, purchased electricity goes into an electric bulb and is converted to visible light and heat energy.

Answer:

Explanation:

Energy transformation is when energy changes from one form to another.  While energy can be transferred or transformed, the total amount of energy does not change – this is called energy conservation. For example, Electricity goes into an electric bulb and is converted to visible light and heat energy.

Hope this helped!!!

The atomic number of an element is also the number of
_________ element.
in an
A. Protons
B. Neutrons
C. Electrons

Answers

Answer: A, protons

Why: it just is

Electrons move from negative to positive while the voltage flows ________ to _______ .

Answers

Answer:

positive to negative.

What part of the roller coaster has the lowest potential energy?

Answers

It’s 1 that would be the lowest point potential energy

As Jack pulls his wagon down the street it moves faster and faster. Jill, sitting a few meters ahead on the sidewalk, wants to slow Jack's wagon down so that it travels with a constant speed. How can Jill accomplish her goal? A) Push the wagon with a force greater than Jack. B) Push Jack away from the wagon so that he is no longer pulling it. C) Pull on the wagon in the opposite direction with twice Jack's force. D) Push the wagon in the opposite direction at a constant force less than Jack.

Answers

Answer:

The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D

Explanation:

In this exercise it is indicated that Jack pushes a car, it is desired that Jill pushes the car so that the speed is constant

take as positive the direction of Jack's thrust

             F_jack - F_jill = 0

              F_jill = F_jack

therefore the push of the two must be equal and Jill's push must have the opposite direction to Jack's push.

The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D

A burner is placed below the right side of the beaker. Which image shows the motionvof of the liquid that will result? it's a gizmo
Convection cells

Answers

Answer:

the second picture

Explanation:

Answer: second picture

Explanation:

(it was right on my gizmo sheet)

Power is the rate at which...........is done or the rate at which........... is converted from one form to another .

Answers

Answer:

the answer is c I thought

An electric current will always follow
a.
the path of least resistance.
b.
a path toward the north pole.
c.
a path toward the south pole.
d.
the path that leads through insulators.

Answers

Answer:

A. The path of least resistance.

Explanation:

ur welcome again ;)

An electric current will always follow the path of least resistance. So, the right option is a.

In inverse relation to the resistance of the pathways, electric current follows every available paths.

The voltage and resistance of the path in the electric circuit affect the amount of electric current that flows through the circuit.

The quantity of electric current flowing through the circuit is inversely proportional to the resistance in the circuit.

Assuming a fixed voltage, the current increases with decreasing resistance. The current decreases in accordance to the level of increasing resistance.

To learn more about electric current, click:

https://brainly.com/question/2264542

#SPJ6

The smaller the mass of an object, the _____ its inertia

Answers

Answer:

larger

Explanation:

just trust me

The smaller the mass of an object, the smaller its inertia, because the inertia of any object is directly proportional to the mass of the object

What is inertia?

The ability of an object to resist changes in motion is known as inertia. The amount of inertia is directly related to an object's mass; in fact, as we frequently observe, the heavier an object is, the harder it is to change its direction of motion.

A straightforward illustration: While it is relatively simple to stop a tennis ball that has been thrown in our direction, we are aware that it is more difficult to stop a large truck that is moving in the same direction at the same speed. This is because the truck has a much higher mass than the tennis ball and a higher moment of inertia. As a result, inertia rises as mass does.

Since the inertia of any object is directly proportional to its mass, the smaller its mass, the less inertia it will have.

Learn more about Inertia from here

https://brainly.com/question/1358512

#SPJ5

please help I got no time!!

Answers

Answer:

42a. Ammeter 2 = 0.20 A

42b. Ammeter 3 = 0.20 A

42c. The current will remain the same i.e unchanged.

43. Equivalent resistance is 11780 Ω

46a. 11 V

46b. 7.5 V

46c. 18.5 V

47. 1.70 A

Explanation:

42a. Determination of ammeter 2

Ammeter 1 = 0.20 A

Ammeter 2 =?

Since the resistors are in series connection, the same current will pass through them. Thus, ammeter 2 will read 0.20 A.

Ammeter 2 = ammeter 1 = 0.20 A

42b. Determination of ammeter 3

Ammeter 1 = 0.20 A

Ammeter 3 =?

Since the resistors are in series connection, the same current will pass through them. Thus, ammeter 3 will read 0.20 A.

Ammeter 3 = ammeter 1 = 0.20 A

42c. Since the resistors are in series connection, the same current will pass through them. Therefore, the current will remain the same.

43. Determination of the equivalent resistance.

We'll begin by converting 1.1 KΩ and 10 KΩ to Ω. This can be obtained as follow:

1 KΩ = 1000 Ω

Therefore,

1.1 KΩ = 1.1 KΩ × 1000 Ω / 1 KΩ

1.1 KΩ = 1100 Ω

1 KΩ = 1000 Ω

Therefore,

10 KΩ = 10 KΩ × 1000 Ω / 1 KΩ

10 KΩ = 10000 Ω

Finally, we shall determine determine the equivalent. This can be obtained as follow:

Resistor 1 (R₁) = 680 Ω

Resistor 2 (R₂) = 1100 Ω

Resistor 3 (R₃) = 10000 Ω

Equivalent Resistance (Rₑq) =?

Rₑq = R₁ + R₂ + R₃

Rₑq = 680 + 1100 + 10000

Rₑq = 11780 Ω

Thus, the equivalent resistance is 11780 Ω

46a. Determination of the voltage across 22 Ω

Current (I) = 0.50 A

Resistor (R₁) = 22 Ω

Voltage (V₁) =?

NOTE: the current is the same since the resistor are in series connection.

V₁ = IR₁

V₁ = 0.5 × 22

V₁ = 11 V

46b. Determination of the voltage across 15 Ω

Current (I) = 0.50 A

Resistor (R₂) = 15 Ω

Voltage (V₂) =?

NOTE: the current is the same since the resistor are in series connection.

V₂ = IR₂

V₂ = 0.5 × 15

V₂ = 7.5 V

46c. Determination of the voltage of the battery.

Voltage 1 (V₁) = 11 V

Voltage 2 (V₂) = 7.5 V

Battery voltage (V) =?

V = V₁ + V₂

V = 11 + 7.5

V = 18.5 V

47. Determination of the current.

We'll begin by calculating the equivalent resistance. This can be obtained as follow:

Resistor 1 (R₁) = 22 Ω

Resistor 2 (R₂) = 4.5 Ω

Equivalent Resistance (R) =?

R = R₁ + R₂

R = 22 + 4.5

R = 26.5 Ω

Finally, we shall determine the current.

Voltage (V) = 45 V

Resistance (R) = 26.5 Ω

Current (I) =?

V = IR

45 = I × 26.5

Divide both side by 26.5

I = 45 / 26.5

I = 1.70 A

Which of the following regions of the EM epxtrum has the highest
frequency?

1) x rays
2) microwaves
3) infrared light
4) ultraviolet light

Answers

Answer:

1) x rays

Explanation:

Honestly Gamma rays has the Highest frequency, but in your options, gamma rays is not among, so x rays has the highest frequency among your options.

by Manshow

Answer:

The answer is (X-rays)

number 1

A person invested
$
8
,
900
$8,900 in an account growing at a rate allowing the money to double every 7 years. How long, to the nearest tenth of a year would it take for the value of the account to reach
$
20
,
600
$20,600?

Answers

Answer:

8.5

Explanation:

To the nearest tenth of a year, it would take around 9.1 years when calculate compoundly for the account's worth to reach $20,600.

What is Compound interest?

A loan or investment's initial principal as well as any accrued interest from earlier periods are both taken into account when calculating compound interest.

To resolve this issue, we can apply the compound interest formula:

A = P(1 + r/n)nt

where:

A represents the balance of the account after t years.P stands for the initial outlay ($8,900 in this case).The annual interest rate is r, which is unknown.The number n determines how often interest is compounded each year (in this case, once every seven years because the value of the money doubles every seven years).The number of years is t.

When A = $20,600, we need to determine t. Since we are aware that the initial investment would double after seven years, we can use the following formula to determine the yearly interest rate:

2 = (1 + r/n)^(nt)

If n is 1/7 (since the investment twice once every 7 years), 2 is the factor by which the investment doubles, and t is an unknown.

When we simplify this equation, we obtain:

t log(1 + r/7) = log(2)

When we solve for r, we get:

r = 7[(2^(1/t))-1]

Now that we have P, r, n, and A, we can enter them into the compound interest formula to find t:

$20,600 = $8,900(1 + r/1)^(1t)

2.318 = (1 + r)^t = log (2.318) / log (one plus r)

t is equal to log(2.318)/log(1 + 7[(2(1/t))-1]).

We can iteratively solve for t using a calculator, beginning with a first guess of 7 years (because the investment doubles every 7 years):

r = 0.0998 and A = $17,800 for t = 7 years

r = 0.0909 and A = $19,397 for t = 8 years.

r = 0.0833 and A = $20,416 for t = 9 years.

r = 0.0823 and A = $20,601 (closest to $20,600) for t = 9.1 years

As a result, it would take the account's value to reach $20,600 in around 9.1 years (to the nearest tenth of a year).

Therefore, when calculated compoundly, it would take approximately 9.1 years for the account's value to reach $20,600, to the nearest tenth of a year.

Learn more about Compound interest, here:

https://brainly.com/question/18958915

#SPJ2

Although not all snakes are poisonous, all snakes may carry what infection?

a
Rabies
b
Polio
c
Tetanus (or Lockjaw)
d
Lyme's disease

Answers

Answer:

C

Explanation:

Not A because mammals cant get rabies. Defenently not polio. I think C is the best answer. Lyme disease is caused by ticks, so no.

1.
You just earned a $1000 bonus at your job. Would you rather receive all the money at the end of the
year or half the money now and half the money later? Why?

Answers

Half bcuz maybe I have dept and I can’t pay it or will have dept and it will be useful for many things and if you will take it at the end of the year you might get robbed and lose all

Energy ___________.

is used to do work
can't be converted from one form to another
can be created or destroyed​

Answers

Answer:

BRAINLIEST PLSSSSSSSSSSSSSSSSSSSSSSSS

Thermodynamics

Explanation:

Thermodynamics is the study of energy. First Law of Thermodynamics: Energy can be changed from one form to another, but it cannot be created or destroyed. The total amount of energy and matter in the Universe remains constant, merely changing from one form to another.

It’s the first one it’s used to do work

A prism is made from transparent plastic. In this plastic, light travels at 0.8
in air. Light enters one face of the prism at right-angles as shown.
NOT TO
SCALE
ө
The light just escapes from the sloping face of the prism.
What is angle 0?
A 37°
B
390
С
510
D
53°

Answers

Answer:

Real answer is im sorry if im wrong

Explanation:

A 53°

The value of the angle Θ will be 51.3°. Option C is correct.

What is the definition of geometry?

It is concerned with the geometry, region, and density of various 2D and 3D shapes.

From snell's law;

[tex]\rm n= \frac{sini}{sinr} \\\\ 0.8= \frac{sin(90-\theta)}{sin \theta} \\\\ 0.8= cot \theta \\\\ \theta= cot^{-1} (0.8)\\\\ \theta =51.3^0[/tex]

The value of the angle Θ will be 51.3°.

Hence,option C is correct.

To learn more about geometry, refer to:

https://brainly.com/question/7558603.

#SPJ2

Other Questions
Which two properties define the critical point of matter in a phase diagram? A. mass and volume B. pressure and volume C. pressure and temperature D. density and temperature E. density and pressure (One Temporary Difference, Tracked for 4 Years, One Permanent Difference, Change in Rate) The pretax financial income of Truttman Company differs from its taxable income throughout each of 4 years as follows. Year Pretax Financial Income Taxable Income Tax Rate 2020 $290,000 $180,000 35% 2021 320,000 225,000 20 2022 350,000 260,000 20 2023 420,000 560,000 20 Pretax financial income for each year includes a nondeductible expense of $30,000 (never deductible for tax purposes). The remainder of the difference between pretax financial income and taxable income in each period is due to one depreciation temporary difference. No deferred income taxes existed at the beginning of 2020. Instructions a. Prepare journal entries to record income taxes in all 4 years. Assume that the change in the tax rate to 20% was not enacted until the beginning of 2021. b. Prepare the income statement for 2021, beginning with Income before income taxes. Nakeisha bought a pair of shorts online for $74. She used a coupon code to get a 10% discount. The website also applied a 5% processing fee to the price after the discount.How much did Nakeisha pay, in the end? Round to the nearest cent. Due today! Why is it a good idea to have floating cities?A: We are running out of landB: We need it for pollution cleanupC: Oceans are risingD: It's a sustainable way to live Create a class to represent light bulbs Create a class called Bulb that will represent a light bulb. It should have instance variables for the manufacturer (String), part number (String), wattage (int) and lumens (int). Get and Set methods should be included. Override the equals and to String methods from class Object. List of Bulbs Create a class called BulbNode which has fields for the data (a Bulb) and next (BulbNode) instance variables. Include a one-argument constructor which takes a Bulb as a parameter. (For hints, see the PowerPoint on "Static vs. Dynamic Structures".) public BulbNode (Bulb b) {...} The instance variables should have protected access. There will not be any get and set methods for the two instance variables. Create an abstract linked list class called BulbList. This should be a linked list with head node as described in lecture. Modify it so that the data type in the nodes is Bulb. The no-argument constructor should create an empty list with first and last pointing to an empty head node, and length equal to zero. Include an append method in this class. Create two more linked list classes that extend the abstract class BulbList: One called UnsortedBulbList and one called SortedBulbList, each with appropriate no-argument constructors. Each of these classes should have a method called add(Bulb) that will add a new node to the list. In the case of the UnsortedBulbList it will add it to the end of the list by calling the append method in the super class. In the case of the SortedBulbList it will insert the node in the proper position to keep the list sorted by wattage. Instantiate two linked lists, and for every Bulb read from the file, add it to the unsorted and sorted lists using the add method. You will end up with the first list having the Bulbs from the input file in the order they were read, and in the second list the Bulbs will be in sorted order. Display the unsorted and sorted Bulbs in a GUI with a GridLayout of one row and two columns. Put the unsorted Bulbs in the left column, and the sorted Bulbs in the right column. The input file There will be an input file provided on Blackboard which contains information about bulbs, one per line, with the manufacturer, part number, wattage and lumens separated by commas, such as: Phillips, 1237DF2, 100, 1200 You can separate the four items using a StringTokenizer. Submitting the Project. You should now have the following files to submit for this project: Project2.java Bulb.java BulbGUI.java BulbNode.java BulbList.java UnsortedBulbList.java SortedBulblist.java Submit a jar file. Rather than upload all the files above separately, we will use Java's facility to create the equivalent of a zip file that is known as a Java Archive file, or "jar" file. Instructions on how to create a jar file using Eclipse are on Blackboard. Create a jar file called Project2.jar and submit that. Be sure the jar file contains source code, not classes. Read the excerpt from The Land.Willie Thomas now looked at my daddy. "Muscle all torn up on this leg here," he said, moving toward the stallions right foreleg. "Dont know if itll heal or not. Now, I can tend t it, but I cant go lyin and sayin itll heal like its spose t.""What else?" demanded my daddy, glancing at the scratches.Willie Thomas followed his look. "Well, them there, theyll heal all right. Its jus that leg I aint so sure of." He turned to my daddy. "Its my boy Mitchell done this, Mister Edward, and I know there aint no way t make it up t ya if this here horse dont heal right, but I jus bout t put a strap t Mitchell my own self bout what he done."What is Willies viewpoint in this excerpt?He thinks that Mister Edward made a mistake by allowing Paul to ride Ghost Wind.He believes that Mister Edward is too demanding when it comes to his horses.He worries that he will be blamed if Ghost Wind does not get well.He thinks that he needs to do what he can to protect Mitchell from Mister Edward. What is an example of an immigration wave that occurred in the United States?The Gold RushThe Civil WarThe unveiling of the first automobileThe Emancipation Proclamation Which is an ABIOTIC factor in biomes? *A. average temperatureB. kinds of treesC. moss and algaeD. number of insect species Responding, "Gee, thanks." when someone slams your hand in the door is an example of _____.1.sarcasm 2.simile The table shows characteristics of two plants, Plant A and Plant B. Fill in the blank with the correct conjugation to the verb Estar Help please Which of these describes henry david thoreau's approach to individualism? A. He questioned society's rules and institutions. B He believed that the rule of law LED to a perfect society. C He wanted to increase government control of citizens' lives.D He promoted communities in which people share everything. Cost-benefit risk analysis is the foundation of the precautionary principle.Group of answer choicesTrueFalse what is 5x-9+2-4=9.4 The number of points Jaden scored in a game is less than 45, and is also a multiple of 7. How many points could Jaden have scored 1. Describe how an acidic solution forms when HCl is mixed in water and how a basic solution forms when NaOH is mixed in water. Answer this question to get marked as barinliest!!!!! Write a peel paragraph explaining why religion caused the English civil war Expand the multiplication expressions by including the back into the expressions. Use the * key to make the symbol. 7abc A water bottle manufacturer plant uses a three-step procedure to produce each unit of bottled water. The first step, casting, which uses 35 labor hours to operate the furnace. The second step, quenching, which uses 35 labor hours, and the final step, dispatch, uses 70 labor hours. If the factory produces 14,000 bottles, than the productivity of labor is equal to: