The substances sodium (Na), oxygen (O2), and sodium oxide (Na2O) participate in this chemical reaction: 4Na + O2 ? 2Na2O. Which statement best describes the reaction? A. Elements rearrange, but no compounds are created or destroyed. B. Sodium oxide is created by the chemical reaction. C. Atoms from sodium oxide rearrange to form sodium and oxygen. D. In a mixture of the three substances, sodium oxide separates from the sodium and oxygen.

Answer: 56.1 g

Explanation:

We begin by finding the formula mass of KCl.

Therefore, 87.0 grams of KCl is equal to [tex]\frac{87.0}{74.5}=1.167785[/tex] moles.

From the reaction, we know that for every 2 moles of KCl produced, 3 moles of diatomic oxygen are produced. This means that there are [tex]1.167785(3/2)=1.7516775[/tex] moles of diatomic oxygen.

The formula mass of diatomic oxygen is 32 g/mol, meaning [tex](1.7516775)(32)=56.1[/tex] grams of diatomic oxygen were produced.

The container is represented by 2 O2 molecules and 4 H2O molecules once the reaction has completed.

The lowest unit of any substance that is made up with one or more atoms and has the ability to exist on its own while keeping all of the material's chemical and physical properties is called a molecule. Within molecules, more atom division takes place. For instance, the atom and molecule of oxygen are represented by the letters O and O2, respectively.

The collection of atoms that arises from the establishment of covalent bonds is referred to as a molecule. Therefore, we may assert that the most fundamental part of a covalent compound is even a molecule.

To know more  about molecule visit :

https://brainly.com/question/28238455

#SPJ4

After balancing the equation, the coefficient in front of the hydrogen would be 3.

A balanced chemical equation is an equation that contains an equal number of different atoms in the reactants and in the products in accordance with the law of conservation of atoms.

According to the law of conservation of atoms, atoms cannot be created nor destroyed during the course of chemical reactions, although their forms may change from reactants to products.

Going by this rule, the balanced equation of the reaction in the illustration would be: [tex]2Co(s) + 6HCl(aq) -- > 2CoCl_3(aq) + 3H_2(g)[/tex]

Thus, from the balanced equation, the coefficient of hydrogen is 3.

More on balancing chemical equations can be found here: https://brainly.com/question/28294176

#SPJ1

Common salt, sometimes referred to as sodium chloride, is a substance consisting of sodium and chlorine atoms. One mole of sodium chloride (23 grams) interacts with one mole of oxygen to produce two moles of sodium oxide and one mole of chlorine. This reaction is known as the sodium chloride–oxygen reaction (NaCl–O2).

The molar masses of sodium (Na) and chlorine (Cl) are respectively 22.99 g/mole and 35.4 g/mole.

If I take a mole of NaCl, there will either be one mole of Na and zero Cl2 molecules, or two moles of Na and two moles of Cl2 molecules on either side.

To know more about moles visit :-

https://brainly.com/question/29724957

#SPJ1

a. The biggest concerns at fracking sites are groundwater contamination, air pollution, and water contamination brought on by the toxic chemicals employed in hydraulic fracturing.

Large land areas are needed for fracking operations, which affects wildlife and ruins habitat.

Pollutants such as spent (used) reactor fuel, uranium mill tailings, and other radioactive wastes are the main environmental issue with nuclear power.These substances have lengthy radioactive half-lives and can endanger human health for tens of thousands of years.

To know more about environmental issues visit:

https://brainly.com/question/28211138

#SPJ4

138.75 grams of fluorine contain in 285g CaF2

To calculate no of we use

No of moles = Given Mass/Molar mass

here given mass is 285g Molar Mass of CaF2 is 78.07g/mol

Number of moles = 285/78.07= 3.650 moles

so we can say that 1 mole of CaF2 contains 2 moles of F2 in it.

3.650 ,moles of Caf2 contains =2 x 3.650=7.30 moles  of F2

Mass of fluorine is 19

19 x 7.30  = 138.72 grams of fluorine is present in 285grams of Caf2

To learn more about Molar Mass :https://brainly.com/question/24191825

According to ideal gas equation, there are 6.49 moles of oxygen gas in the container.

The ideal gas equation is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.The law was proposed by Emile Clapeyron.

Substituting the given values in above equation, n=PV/RT=101.3×145.6/8.314×273.15=6.49 moles.

Thus, there are 6.49 moles in the container.

Learn more about ideal gas equation,here:

https://brainly.com/question/28837405

#SPJ1

Burning coal produces a large amount of energy. This statement is false about coal. Therefore, option D is correct.

In the United States, coal is primarily used as a fuel to generate electricity. Bituminous coal, subbituminous coal, or lignite are burned in coal-fired power plants. The heat generated by coal combustion is used to convert water into high-pressure steam, which drives a turbine and generates electricity.

Carbon is found in all living things, including humans. When coal is burned, the carbon in the coal combines with the oxygen in the air to form carbon dioxide. Carbon dioxide (CO2) is a colorless and odorless gas, but it is one of several gases in the atmosphere that can trap the earth's heat.

Thus, option D is correct.

To learn more about burning coal, follow the link;

https://brainly.com/question/21085820

#SPJ1

Answer:

Explanation:

If the EN difference is large then it has an ionic bond, if it's low it has a covalent bond.

The term "shielding effect" describes how the presence of core/core electrons reduces the positive charge experienced by the core/valence electrons.

The shielding effect is known as the reduction of the effective nuclear charge of the electron cloud as a result of the change in the attractive force acting on the electrons of the atoms. This particular case of electric field filtering is unique. Many projects in the field of materials science also consider this effect. The term "shielding effect" describes the reduction in positive charge experienced by the outer/valence electrons as a result of the presence of inner/core electrons. It prevents the outer/valence electrons from fully benefiting from the positive charge coming from the nucleus.

Due to the increased amount of core electrons, the shielding is enhanced when traveling downhill in groups. The amount of core electrons remains constant as it does not change as it moves over a period of time.

To know more about shielding effect, visit:

brainly.com/question/26366780

#SPJ1

The state of matter is dependent on the intermolecular forces of attraction and this is the case of Nitrogen which is gas and has Vander Waal's force of attraction while water, a liquid molecule has hydrogen bonding.

Molecular interaction occurs between molecules or atoms which are linked by bonds. These interactions include repulsive and cohesive forces. An interaction is cohesive when the attraction force between molecules are of alike nature. It is repulsive for unlike molecules.

Intermolecular forces are the attractive and repulsive forces between molecules. The presence of Vander Waal's force in Nitrogen and hydrogen bond in water makes it repulsive.

Learn more on molecular forces here: https://brainly.com/question/2193457

#SPJ1

The average molar mass and interaction parameter constant is 23.4g and  1.8746 respectively.

The following is an example of an osmotic pressure equation that was discovered by Dutch chemist Jacobus to exist in a quantitative relationship between osmotic pressure and solute concentration.

Where,.

It is crucial to remember that the derived Osmotic Pressure equation only applies to solutions that behave exactly like ideal solutions. Because pure water has no osmotic pressure.

B = ln [p1/ (1-p1)] / (1 - 2p1) = ln [p1- ln (1-p1)] / (1 - 2p1)

T=22 +273K=295K

p1=0.867, p2=1.05

B=1.8746

To study more about van 't Hoff index -

https://brainly.com/question/24100697

#SPJ4

Nitrogen is a non -polar  because its molecule have Van der Waals  force of attraction while water is a liquid because its molecule have hydrogen bonding .

Molecular Interactions are between molecules that are not linked by bonds. Molecular interactions include cohesive attraction between like, adhesive attraction between unlike and repulsive forces between molecules. whether polar or non- polar are attracted to one another by dispersion forces

There are four types of interactions:

Therefore molecular interaction are between molecules that are not linked by bonds either nitrogen or water.

Learn more about molecular interaction here: brainly.com/question/25540361

#SPJ1

We may arrange the valence electrons around the center atom of PO3-3 and try to fill each atom's outer shell once we learn how many exist. Its PO3 3- Lewis structure is made up of 26 valence electrons.

Only a few of the elements in the periodic table have a following letter that is lowercase after their first capital letter. Therefore, you can tell an ion is polyatomic if it has two capital letters together.

However, the majority of elements are found in molecules made up of two or maybe more atoms. We refer to these as polyatomic elements. The oxygen family of elements, which includes oxygen.

To know more about polyatomic visit:

https://brainly.com/question/13704605

#SPJ4

No, the driver is not legally dr unk in PA.

Absorbance is a measure of how well a material absorbs light. It is a logarithmic measure of the light that is absorbed by a material, rather than the light that is reflected or transmitted. Absorbance is also known as optical density, and is represented by the unit of absorbance, the absorbance unit (AU). Absorbance is used to measure the amount of light that is absorbed by a given material, and can be used to measure the concentration of a given material in a solution.

The absorbance reading of .635 is equivalent to a blood alcohol level of 0.064%, which is lower than the legal limit of 0.08%. The absorbance reading is calculated by the formula A = εcl, where A is absorbance, ε is the molar absorptivity (3.52 cm in this case), c is the concentration (0.064% in this case), and l is the path length (1 cm in this case).

To learn more about absorbance
https://brainly.com/question/14919298
#SPJ1

The equilibrium constant for the reaction PCl₃(g)+Cl₂(g) ⇌ PCl₅(g) at

400K is 1/Kc.

The ratio of the amount of reactant to the amount of product that is used to predict the chemical behavior of a reaction is known as the equilibrium constant for chemical reactions. The rate constants remain unchanged at a specific temperature.

When the reactants and products do not change in any significant way over time, this is known as chemical equilibrium. When the forward and reverse reactions happen at the same rate, this is the condition. The equilibrium constant, K, serves as a description of this state of equilibrium.

To know more about equilibrium constant visit:

https://brainly.com/question/15054852

#SPJ1

Answer:

0.204 mol

Explanation:

Molar mass of Pb(NO3)2 = 331.22 g/mol

so mol of 67.6 g equals 67.6g x (1 mole/331.22g) = 0.204 mol

Hello,

I hope you and your family are doing well!

To convert a mass from kilograms to grams, we can multiply the mass by 1000, since there are 1000 grams in 1 kilogram.

Therefore, the mass of Lavasha's backpack expressed in grams is:

62.75 kilograms * 1000 grams/kilogram = 62750 grams

So Lavasha's backpack has a mass of 62750 grams.

Answer: A

Please consider giving 5 stars and brainliest if you find this answer helpful.

Happy Holidays!

The formula of the ionic compound consisting of the positive ion to the left of the box and the negative ion above the box are as follows:

MgCl₂, MgS, MgF₂, Mg₃N₂, MgO, Mg₃P₂

CsCl, Cs₂S, CsF, Cs₃N, Cs₂O, Cs₃P

CrCl₃, Cr₂S₃, CrF₃, CrN, Cr₂O₃, CrP

NaCl, Na₂S, NaF, Na₃N, Na₂O, Na₃P

ZnCl₂, ZnS, ZnF₂, Zn₃N₂, ZnO, Zn₃P₂

AlCl₃, Al₂S₃, AlF₃, AlN, Al₂O₃, AlP

Ionic compounds are pure substances made up of chemically bound ions. Examples include his binary compounds such as table salt and polyatomic compounds such as sodium sulfate. All ionic compounds form crystal lattices. Ionic compounds are pure substances formed mainly by positive and negative ionic attraction. Compounds are formed mainly by ions, although a small amount of electron sharing always occurs.

To know more about ionic compounds, visit:

https://brainly.com/question/9167977

#SPJ1

a) NaCl + H2O

c) POLi + HCO3

The correct answer is

a. Compare the Re values of the mixture components to the Ry values of pure known compounds.

Chromatography can identify the components of an unknown mixture by comparing the retention time or retention index of the mixture components to that of known compounds.

Retention time is the time it takes for a compound to pass through a chromatographic column, and retention index is a measure of the distance a compound travels through the column compared to a set of reference compounds. Compounds in a mixture can be identified by comparing the retention time or retention index of the mixture components to pure known compounds.

Other techniques that can be used chromatographically to identify unknown mixture components include mass spectrometry, infrared spectroscopy, and nuclear magnetic resonance spectroscopy. These techniques involve analyzing the molecular properties of mixture components to determine their identities.

Read more about chromatography at:

brainly.com/question/25286710

#SPJ4

The solvolysis of chrysanthemyl tosylate can occur through a nucleophilic substitution reaction, where the tosylate group is replaced by a solvent molecule. The mechanism can proceed through a series of steps as follows:

The tosylate group, which is a good leaving group, is protonated by the solvent, such as water, to form a charged intermediate.

The intermediate then undergoes an S_N2 reaction, where the solvent molecule acts as the nucleophile and attacks the carbon atom bearing the tosylate group. This results in the loss of the tosylate group and the formation of an intermediate containing a solvent molecule bonded to the carbon atom.

The intermediate then undergoes deprotonation, resulting in the formation of an alcohol functional group. The resulting alcohols will be a mixture of artemesia and yomogi alcohols, as these are the two primary components of chrysanthemyl tosylate.

Overall, the mechanism for the formation of these alcohols from chrysanthemyl tosylate can be represented as follows:

Chrysanthemyl tosylate + solvent (e.g. water) ---> chrysanthemic acid alcohol + tosylate ion

chrysanthemic acid alcohol ---> artemesia/yomogi alcohol + proton

Find more about Chrysanthemic acid

brainly.com/question/28203025

#SPJ4

The concentration of sodium in the soft drink in mass percent is 9.179485 x 10⁻³ %.

Percentage by mass, mass %, is a measure of concentration that indicates the mass of solute per mass of solution. In other words, the mass percent of a component in the solution is defined as the ratio of the mass of the component to the mass of the solution, expressed as a percentage.

mass % = (mass of solute / mass of solution) x 100

In the case of a soft drink which contains 28 mg of sodium in 305 g of H₂O, sodium is the solute and the solution is the mixture of sodium and H₂O.

mass % = (mass of solute / mass of solution) x 100

mass % = (28 mg / 28 mg + 305 g) x 100

mass % = (28 mg / 305028 mg) x 100

mass % = (9.179485 x 10⁻⁵) x 100

mass % = 9.179485 x 10⁻³ %

Hence, the mass percent of sodium in the soft drink is 9.179485 x 10⁻³ %.

Learn more about the percentage by mass here: brainly.com/question/27574467

#SPJ4

NaCl is more reactive than NaBr because Cl is more electronegative than Br and it is smaller than Br, thus, can be easily attack other compounds.

NaCl is an ionic compound formed thorough the electrons loss from the metallic sodium to chlorine. Sodium  has one valence electron which can be easily lost to electronegative non-metals such as halogens.

Halogens such as chlorine, fluorine etc. are highly electronegative and easily gain one electrons from metals. The electronegativity of atoms decreases down a group. Thus, F is much more electronegative than Cl which is more electronegative than Br than I.

NaBr is an ionic compound similar to NaCl. However, Br is bigger in size and less electronegative than Cl that's why it is chemically less reactive in comparison to NaCl.

To find more on NaCl, refer here:

https://brainly.com/question/4487559

#SPJ1

Answer: 333.415 grams of AlCl3 

Explanation:

Answer:

1.992×10–²³

Explanation:

We mainly use molar masses in calculation and this is not a mass of single but it is mass of one mole of atoms, molecules or ions. We know that in ions and atoms there are only differences in the number of electrons and mass of electrons is negligible. Then the mass of the ion and atom of the same element is the same.

The empirical formula of the organic molecule, given that it contains 2.088 L Carbon, 2.688 L Hydrogen and 0.896 L oxigen is C₃H₄₈O

The following data were obtained from the question:

The empirical formula of the organic compound can be obtained as follow:

Divide by their molar mass

C = 2.088 / 12 = 0.174

H = 2.688 / 1 = 2.688

O = 0.896 / 16 = 0.056

Divide by the smallest

C = 0.174 / 0.056 = 3

H = 2.688/ 0.056 = 48

O = 0.056 / 0.056 = 1

Thus, we can conclude that the empirical formula of the organic molecule is C₃H₄₈O

Learn more about empirical formula:

https://brainly.com/question/9459553

#SPJ1

The pH change of a 0.280 M solution of citric acid is 1.7917.

What is citric acid and why is it useful?

Citric acid was originally produced from lemon juice by a Swedish researcher in 1784.

The odorless and colorless substance was manufactured from lemon juice until the early 1900s when researchers discovered that it could also be made from the black mold Aspergillus niger, which generates citric acid as it feeds on sugar.

Because of its acidic, sour-tasting character, citric acid is largely utilized as a flavoring and preserving agent, especially in soft drinks and candies. It’s also used to stabilize or preserve pharmaceuticals and as a -disinfectant.

As, in the question we have been provided with the pK2, so we will first convert it into ka.

ka= 10 ^ -4.77= 1.70 × 10 -5

⇒1.70 × 10- 5 = x²/ 0.280 -x

⇒x= [H+] = 0.00218 M

pH = - log [0.00218]

pH = 2.6615 initial pH

pH= pKa + loh [salt/acid]

pH= 4.77 +log [0.135/0.280]

pH= 4.77 - 0.3168 = 4.4532

change pH= 4.4532 - 2.6615 = 1.7917.

To know more about pH, click the given link

https://brainly.com/question/172153

#SPJ1

Answer: [tex][B]=16 \text{ M}[/tex]

Explanation:

[tex]K_c=\frac{[B]}{[A]}\\\\7.0=\frac{[B]}{2.3 \text{ M}} \\ \\[/tex]

[tex][B]=16 \text{ M}[/tex]