The scientist first credited for discovering the concept of inertia was Select one: a. Newton. b. Aristotle. c. Galileo. d. Copernicus

The magnitude of the velocity of ball B is 14.5 ft/s and the magnitude of the velocity of ball C is 7.3 ft/s.

In the collision, momentum is conserved. Therefore, the total momentum before the collision is equal to the total momentum after the collision. Let's define the positive x direction as the direction of A's initial velocity. Then, the momentum of ball A before the collision is mAv0 = 18mA.

After the collision, the momentum of ball A is mA(vA)x, where (vA)x is the x component of vA. The momentum of balls B and C after the collision is mBvB and mCvC, respectively. Since balls B and C move in opposite directions, their momenta have opposite signs. Therefore, we have:

We also know that the total kinetic energy is not conserved in the collision, since some of the energy is lost due to friction. However, we can use conservation of kinetic energy to find the speed of B and C immediately after the collision, since they move on a frictionless surface. Before the collision, A has kinetic energy of (1/2)mAv0². After the collision, A has kinetic energy of (1/2)mA(vA)², and B and C have kinetic energies of (1/2)mBvB² and (1/2)mCvC², respectively. Therefore, we have:

We can use these two equations to solve for vB and vC. The algebra is a bit messy, but we can simplify by noticing that the x component of momentum is conserved in the collision. Therefore, we have:

where vBx and vCx are the x components of vB and vC, respectively. Since B and C move in opposite directions, their x components have opposite signs.

Solving for vBx, we get:

Substituting this expression into the equation for conservation of kinetic energy, we get:

Solving for vCx, we get a quadratic equation:

We can solve for vCx using the quadratic formula. Once we know vCx, we can use the equation for conservation of momentum to find vBx. Finally, we can use the Pythagorean theorem to find the magnitudes of vB and vC.

Plugging in the given values, we find that the magnitude of the velocity of ball B is 14.5 ft/s and the magnitude of the velocity of ball C is 7.3 ft/s.

To learn more about magnitude of the velocity, here

https://brainly.com/question/30559316

#SPJ4

Therefore the answer is (B) 18.7 for the angle where wavelength is given to us.

This problem involves the concept of diffraction, where a wave (in this case, light) bends around an obstacle (in this case, a slit). The bending of the wave causes interference, resulting in a pattern of bright and dark fringes. The distance between adjacent fringes depends on the wavelength of the light and the width of the slit.

To solve this problem, we can use the formula for the position of the first dark fringe:
[tex]sin theta = wavelength / (d * m)[/tex]

where θ is angle from the centerline, λ is wavelength of the light, d is width of the slit, and m is order of the fringe (which is 1 for the first dark fringe).

Plugging in the values given in the problem:
[tex]sin theta = (610 nm) / (1.90 microm * 1)[/tex]

Note that we need to convert the width of the slit to the same units as the wavelength, so we convert μm to nm:
[tex]sin theta = (610 nm) / (1900 nm)\\sin theta = 0.321[/tex]

To find θ, we take the inverse sine of 0.321:
[tex]theta = sin⁻¹(0.321)\\theta = 18.7 degree[/tex]

Therefore, the answer is (B) 18.7.

Learn more about wavelength here:

https://brainly.com/question/28466888

#SPJ11

The magnetic field as a function of the radial coordinate r for the co-axial wire system

Assuming that the co-axial wire system consists of two cylindrical wires with radii a and b (where a>b), and that a current I flows through the inner wire and an equal and opposite current (-I) flows through the outer wire, we can use Ampere's Law to determine the magnetic field as a function of the radial coordinate in the two regions specified.

For the region inside the inner wire (i.e., for r < b), the magnetic field can be calculated using a circular path of radius r and Ampere's Law:

∮ B · dl = μ0 Ienc

where B is the magnetic field, dl is a small segment of the circular path, μ0 is the permeability of free space, and Ienc is the current enclosed by the path.

Since the magnetic field is symmetric with respect to the axis of the wire, we can choose a circular path of radius r that lies in a plane perpendicular to the wire axis. For this path, the enclosed current is simply I, so we have:

B 2πr = μ0 I

Solving for B, we get:

B = μ0 I / (2πr)

So, for r < b, the magnetic field is proportional to 1/r, and decreases as we move closer to the wire.

For the region between the two wires (i.e., for b < r < a), we can use a circular path of radius r and Ampere's Law again:

∮ B · dl = μ0 Ienc

where now Ienc is the net current enclosed by the path, which is the difference between the currents flowing in the inner and outer wires. Since the currents are equal and opposite, the net enclosed current is zero, so we have:

B 2πr = 0

Therefore, for b < r < a, the magnetic field is zero.

For the region outside the outer wire (i.e., for r > a), we can again use Ampere's Law with a circular path of radius r:

∮ B · dl = μ0 Ienc

Now the enclosed current is -I, so we have:

B 2πr = μ0 (-I)

Solving for B, we get:

B = -μ0 I / (2πr)

So, for r > a, the magnetic field is again proportional to 1/r, but with opposite sign compared to the field inside the inner wire.

B(r) = { μ0 I / (2πr), for r < b

0, for b < r < a

-μ0 I / (2πr), for r > a }

where I is the current flowing through the inner wire.

Learn more about radial coordinate

brainly.com/question/28589244

#SPJ11

A deposit of gravel has large spaces between grains and the spaces are well connected. The word that best describes the sample of gravel with large connected spaces between grains is "permeable".

This is because a permeable material allows fluids or gases to pass through it, and in the case of gravel with large, well-connected spaces between grains, water or other fluids can easily flow through the material. An impermeable material, on the other hand, does not allow fluids or gases to pass through it. Aquifers and aquitards are terms used to describe underground geological formations that hold or impede the flow of groundwater, respectively, and are not directly applicable to a sample of gravel.

Learn more about gravel here:

https://brainly.com/question/20741309

#SPJ11

To determine the current and resistance of the toaster, Therefore, the resistance of the toaster is 48.18 ohms.

we can use Ohm's law and the formula for power: Ohm's Law: V = IR, where V is voltage, I is current, and R is resistance. Power Formula: P = VI, where P is power, V is voltage, and I is current.From the problem, we know that the toaster is rated at 600 W when connected to a 170 V source. Therefore, we can use the power formula to find the current:P = VI.600 W = 170 V x II = 3.53 A. So the current that the toaster carries is 3.53 A.

To find the resistance, we can use Ohm's Law:R = V/I.R = 170 V / 3.53 AR = 48.18 ohms. Therefore, the resistance of the toaster is 48.18 ohms.

Learn more about toaster here:https://brainly.com/question/30201627

#SPJ11

To maintain the constant speed of the car against a drag force of 360 N, the power required is 12.54 hp.

To maintain a constant speed, the power output of the car's engine must be equal to the drag force.

The formula for power is P = Fv, where P is power, F is force, and v is velocity.

Therefore, the power required to maintain a constant speed with a drag force of 360 N is:

[tex]P = f_d \times v[/tex]
[tex]P = 360 \  N \times 26 \ m/s[/tex]
P = 9360 W

To convert watts to horsepower, we divide by 746:

P = 9360 W / 746
P = 12.54 hp

Therefore, the new power required to maintain a constant speed with a drag force of 360 N is 12.54 hp.

Learn more about drag force:

https://brainly.com/question/27817330

#SPJ11

To solve the problem, we first need to find the net force acting on the sled, which is the sum of the forces parallel and perpendicular to the incline. The force of gravity can be resolved into a component parallel to the incline and a component perpendicular to the incline.

The component parallel to the incline causes the sled to slide down, while the component perpendicular to the incline balances the normal force from the incline. The force of kinetic friction acts parallel to the incline and opposes the motion of the sled. We can use the equation F = ma to find the acceleration of the sled up the incline, and then use the kinematic equations to find how far up the incline the sled travels and what its speed is when it returns to its starting point.

We also need to consider the condition for the sled not to get stuck at some point on the incline. This condition is that the coefficient of static friction between the sled and the incline must be greater than or equal to the tangent of the angle of the incline. If the coefficient of static friction is less than the tangent of the angle, then the force of kinetic friction will be greater than the force of static friction and the sled will slide back down the incline.

a) The first step is to find the net force acting on the sled. The forces acting on the sled are its weight mg, the normal force N perpendicular to the incline, and the force of kinetic friction f k parallel to the incline. The component of the weight parallel to the incline is mg sin(28°), so the net force is:

Fnet = mg sin(28°) - f k

where

f k = μk N

and

N = mg cos(28°)

Substituting in the values gives:

Fnet = mg sin(28°) - μk mg cos(28°)

The acceleration of the sled is:

a = Fnet / m

Substituting the values and solving for acceleration:

a = (16 kg)(9.8 m/s^2) sin(28°) - (0.25)(16 kg)(9.8 m/s^2) cos(28°) / 16 kg

a = 1.37 m/s^2

Now we can use the kinematic equation:

vf^2 = vi^2 + 2ad

where

vi = 2.0 m/s (initial velocity)

vf = 0 (final velocity, since the sled stops at some point)

a = 1.37 m/s^2 (acceleration)

d = distance up the incline (what we want to solve for)

Solving for d:

d = (vf^2 - vi^2) / (2a)

d = (0 - (2.0 m/s)^2) / (2(-1.37 m/s^2) sin(28°))

d = 2.8 m

So the sled travels 2.8 meters up the incline.

b) In order for the sled not to get stuck at the point determined in part a, the coefficient of static friction must be greater than or equal to the ratio of the net force perpendicular to the incline to the normal force. This ratio is:

Fnet,perpendicular / N = mg cos(28°) / mg sin(28°) = tan(28°)

So the coefficient of static friction must be:

μs ≥ tan(28°)

c) If the sled slides back down the incline, we can use the same kinematic equation as before, but this time the initial velocity is 0 and the final velocity is what we want to solve for. The acceleration is still the same, so:

vf^2 = vi^2 + 2ad

vf^2 = 2(1.37 m/s^2)(2.8 m)

vf = 2.6 m/s

So the sled's speed when it returns to its starting point is 2.6 m/s.

To know more about kinetic friction

brainly.com/question/13828735

#SPJ11

Yes, it is possible for a rocket to function in empty space, even though there is nothing to push against except itself.

This is because rockets work on the principle of Newton's third law of motion, which states that for every action, there is an equal and opposite reaction. In other words, when the rocket expels exhaust gases out of its engine, the gases push back against the rocket with an equal and opposite force, propelling it forward.
This process works equally well in a vacuum, where there is no air resistance to slow the rocket down. In fact, rockets are ideally suited for space travel precisely because they can function in a vacuum, where other forms of propulsion, such as airplanes or cars, would not work. However, it's worth noting that the lack of air resistance in space also means that a rocket's speed can continue to increase indefinitely, making it difficult to slow down or change direction once it gets going.

To learn more about rockets, click here:

https://brainly.com/question/15061209

#SPJ11

The work done to accelerate the object and the work against the frictional force are what result in the change in kinetic energy. It is necessary to defeat this force. Typically, we would use the equation W=Fd, where d is the distance traveled, to compute the work completed.

Based on the given information, we can calculate the work done by the shot-putter on the shot during the acceleration phase using the formula:
W = (1/2) * m * v^2
Here,  W is the work done, m is the mass of the shot, and v is the final velocity of the shot. Plugging in the values, we get:
W = (1/2) * 7.19 kg * (13 m/s)^2
W = 625.61 J

We can also calculate the potential energy gained by the shot due to the height it was raised during the process using the formula:
PE = m * g * h

where PE is the potential energy gained, m is the mass of the shot, g is the acceleration due to gravity (9.8 m/s^2), and h is the height raised. Plugging in the values, we get:
PE = 7.19 kg * 9.8 m/s^2 * 0.825 m
PE = 57.26 J

Therefore, the total work done on the shot by the shot-putter is the sum of the work done during the acceleration phase and the potential energy gained due to the height raised:
Total work done = W + PE
Total work done = 625.61 J + 57.26 J
Total work done = 682.87 J

This means that the shot-putter expended 682.87 J of energy to accelerate the shot and raise it to the given height.

Know more about the work done by the shot-putter:

https://brainly.com/question/29876681

#SPJ11

When unpolarized light passes through two polarizers whose transmission axes are at an angle of 35.0 ∘ with respect to each other, the intensity of the light that emerges from the second polarizer will be reduced by a factor of cos^2(35.0 ∘) ≈ 0.82 compared to the intensity of the incident light.

This is because the first polarizer will only allow light waves that vibrate in a certain direction (along its transmission axis) to pass through, while the second polarizer will only allow light waves that vibrate in a direction perpendicular to its transmission axis to pass through. The angle of 35.0 ∘ between the transmission axes means that some of the light waves that were allowed to pass through the first polarizer will be blocked by the second polarizer, since their vibration direction is not perpendicular to the second polarizer's transmission axis. The reduction in intensity is due to the fact that the second polarizer is blocking some of the light waves that were allowed to pass through the first polarizer.

When unpolarized light passes through two polarizers whose transmission axes are at an angle of 35.0° with respect to each other, the intensity of the transmitted light will be reduced. The amount of reduction can be calculated using Malus' Law, which states that the intensity of the transmitted light (I) is proportional to the square of the cosine of the angle between the transmission axes (θ).
To find the transmitted light intensity, follow these steps:
1. First, the unpolarized light passes through the first polarizer. This polarizer filters the light and only allows the components parallel to its transmission axis to pass through. The intensity of the light after passing through the first polarizer will be half the initial intensity (I0/2).
2. Next, the partially polarized light passes through the second polarizer. The transmission axes of the two polarizers are at an angle of 35.0°. To calculate the intensity of the light transmitted through the second polarizer, use Malus' Law: I = (I0/2) * cos²(θ)
where I0 is the initial intensity of the unpolarized light and θ is the angle between the transmission axes (35.0°).
3. Plug in the values and solve for I:
I = (I0/2) * cos²(35.0°)
By following these steps, you can determine the intensity of the transmitted light after passing through two polarizers with transmission axes at an angle of 35.0°.

Visit here to learn more about polarizers:

brainly.com/question/29217577

#SPJ11

Force = 31 N-s / 1.12 s = 27.7 N

Rounding to the nearest whole number, the magnitude of impulse needed is 28 N-s.

We can use the formula for impulse to find the magnitude of impulse needed to give a 7-kg object a momentum change of magnitude 31 kg-m/s:

Impulse = Change in momentum = Final momentum - Initial momentum

Since the initial momentum is zero, the impulse is equal to the final momentum. Therefore:

Impulse = Change in momentum = 31 kg-m/s

To convert this to newton-seconds (N-s), we use the definition of impulse, which is the product of force and time:

Impulse = Force × Time

Since the force is constant, we can use the formula for impulse in terms of force and time:

Impulse = Force × Time = (mass × acceleration) × time

We can rearrange this formula to solve for the time needed to apply the impulse:

Time = Impulse / (mass × acceleration)

Since we are given the mass and the magnitude of the momentum change, we can calculate the acceleration needed to produce that change using the formula:

Change in momentum = mass × acceleration

Solving for acceleration, we get:

acceleration = Change in momentum / mass = 31 kg-m/s / 7 kg = 4.43 m/s^2

Now we can use the formula for time to find the time needed to apply the impulse:

Time = Impulse / (mass × acceleration) = 31 N-s / (7 kg × 4.43 m/s^2) = 1.12 s

Finally, we can use the formula for impulse in terms of force and time to find the magnitude of the force needed to produce the impulse:

Impulse = Force × Time

31 N-s = Force × 1.12 s

Force = 31 N-s / 1.12 s = 27.7 N

Rounding to the nearest whole number, the magnitude of impulse needed is 28 N-s.

VVisit to know more about Force:-

brainly.com/question/12970081

#SPJ11

The magnitude of the charge q = 2.80 x 10^-8 C

To determine q, we can use the equation for potential:

V = kq/r

where V is the potential, k is Coulomb's constant (9 x 10^9 N*m^2/C^2), q is the charge, and r is the distance from the point charge to the equipotential surface.

Since we are given the potential and area of the equipotential surface, we can calculate the distance from the point charge to the surface using the formula for the area of a sphere:

A = 4πr^2

Solving for r, we get:

r = √(A/4π) = √(2/4π) = 0.564 m

Now we can substitute the given values into the equation for potential and solve for q:

V = kq/r

447 = (9 x 10^9)(q)/(0.564)

q = (447)(0.564)/(9 x 10^9) = 2.80 x 10^-8 C

Therefore, the charge q of the point charge is 2.80 x 10^-8 C

Visit https://brainly.com/question/4305583 to learn more about Electric Potential

#SPJ11

The weight of the spool is opposite in direction but the same in magnitude so the weight of the spool is 2.6 N .

To determine the weight of the spool, we need to consider the equilibrium of forces acting on it. In this case, the two forces involved are the string's tension and the spool's weight.

Since the spool is in equilibrium, the vertical component of the tension in the string must balance the weight of the spool. The tension in the string acts vertically upward, opposing the downward force of the weight.

Therefore, the weight of the spool is equal in magnitude but opposite in direction to the tension in the string. We can calculate it using the given information:

Weight of the spool = 2.6 N (opposite direction to the tension)

So, the weight of the spool is 2.6 N.

learn more about tension in the string:

https://brainly.com/question/30470948

#SPJ12

The potential energy stored in the stretched spring is 0.5 joules.


The formula for potential energy stored in a spring is given as:

Potential energy = (1/2) x spring constant x (extension)^2

Here, we are given that a 5-newton force causes a spring to stretch 0.2 meter.

The spring constant is a measure of how stiff the spring is and it is denoted by 'k'. In this case, we are not given the spring constant, so we need to calculate it using the given information.

The formula for spring constant is given as:

Spring constant = Force / Extension

Substituting the given values, we get:

Spring constant = 5 N / 0.2 m = 25 N/m

Now, we can use this value of spring constant and the given extension to calculate the potential energy stored in the spring.

Potential energy = (1/2) x 25 N/m x (0.2 m)^2 = 0.5 joules


To calculate the potential energy stored in the stretched spring, we need to use the formula:

Potential energy = (1/2) x spring constant x (extension)^2

Here, we are given that a 5-newton force causes a spring to stretch 0.2 meter. This means that the extension of the spring is 0.2 meter.

The spring constant is a measure of how stiff the spring is and it is denoted by 'k'. In this case, we are not given the spring constant, so we need to calculate it using the given information.

The formula for spring constant is given as:

Spring constant = Force / Extension

Substituting the given values, we get:

Spring constant = 5 N / 0.2 m = 25 N/m

Now, we can use this value of spring constant and the given extension to calculate the potential energy stored in the spring.

Potential energy = (1/2) x 25 N/m x (0.2 m)^2

Simplifying this expression, we get:

Potential energy = 0.5 joules

Therefore, the potential energy stored in the stretched spring is 0.5 joules.

To calculate the potential energy stored in the stretched spring, we can use Hooke's Law formula for potential energy: PE = (1/2) * k * x^2, where PE is the potential energy, k is the spring constant, and x is the displacement of the spring.


Step 1: Find the spring constant (k) using Hooke's Law: F = k * x. We know the force (F) is 5 Newtons and the displacement (x) is 0.2 meters.
5 = k * 0.2

Step 2: Solve for k:
k = 5 / 0.2 = 25 N/m

Step 3: Plug the values of k and x into the potential energy formula:
PE = (1/2) * 25 * (0.2)^2

Step 4: Calculate the potential energy:
PE = (1/2) * 25 * 0.04 = 0.5 Joules

So, the potential energy stored in the stretched spring is 0.5 Joules.

To know more about Force refer to

https://brainly.com/question/13191643

#SPJ11

Racial Formations essay reading, race is defined as a socio historical concept.

According to the authors of the "Racial Formations" essay, race is a socio-historical concept that is constantly being constructed and reconstructed by society. This means that race is not a fixed biological category but a product of social, cultural, and historical processes that shape our understanding and interpretation of human differences. The authors argue that the concept of race is not based on any objective biological criteria, but rather on socially constructed ideas about physical and cultural differences that are used to justify power relations and social inequalities.

I agree with this definition of race as a socio-historical concept because it acknowledges that race is not a natural or biological phenomenon, but rather a product of human history and social relations. It recognizes that race is not something that is fixed or immutable, but rather something that is constantly being constructed and reconstructed by society through processes of racialization and racial formation. This perspective challenges the traditional biological concept of race, which assumes that human differences are based on fixed and immutable categories such as skin color, facial features, or genetic makeup.

In reality, race is socially constructed and can change over time and across different societies. For example, what is considered "black" or "white" in one society may be different in another, and what is considered "racial" in one context may not be in another. The social construction of race is also reflected in the way that racial categories are used to justify power relations and social inequalities, such as in the case of racial discrimination or racial profiling. In summary, race is a socio-historical concept that is shaped by society and culture, and it is important to recognize this in order to challenge racial discrimination and promote social justice.

To know more about Racial Formations here

https://brainly.com/question/31738376

#SPJ1

In case of given scenario, The 'work done' has no specific sign.

To determine the sign of the work done on the rock by the man, we need to consider the following terms:

1. Force: The man is applying a force on the rock when he pushes it.
2. Displacement: Displacement refers to the change in position of the rock.

In this scenario, the man is applying force on the rock, but the rock does not move, meaning there is no displacement.

The formula for work is:
Work = Force x Displacement x cosθ

θ is the angle of displacement.

Since the displacement is zero, the work done on the rock by the man is also zero. So, the sign of the work done is neither positive nor negative; it's simply zero.

To know more about work done here:

https://brainly.com/question/30073908#

#SPJ11

the child's speed at the bottom of the arc is approximately 2.94 m/s.

To determine the speed (v1) of the child at the bottom of the arc, we'll use the conservation of mechanical energy principle. The initial potential energy at the highest point of the swing will convert into kinetic energy at the lowest point of the arc.
Step 1: Calculate the initial height (h) above the lowest point of the arc
h = L - L*cos(angle) = 3m - 3m*cos(45°) = 3m - 3m*(√2/2) = 3m(1 - √2/2)
Step 2: Calculate the initial potential energy (PE) at the highest point
PE = m*g*h = 20kg * 9.81m/s² * 3m(1 - √2/2)
Step 3: At the lowest point, the kinetic energy (KE) equals the initial potential energy (PE)
KE = 0.5*m*v1² = PE
0.5*20kg*v1² = 20kg * 9.81m/s² * 3m(1 - √2/2)
Step 4: Solve for v1
v1² = 2 * 9.81m/s² * 3m(1 - √2/2)
v1 = √[2 * 9.81m/s² * 3m(1 - √2/2)]
v1 ≈ 2.94 m/s (using two significant figures)
So, the child's speed at the bottom of the arc is approximately 2.94 m/s.

learn more about speed here

https://brainly.com/question/14666895

#SPJ11

the child's speed at the bottom of the arc is approximately 2.94 m/s.

To determine the speed (v1) of the child at the bottom of the arc, we'll use the conservation of mechanical energy principle. The initial potential energy at the highest point of the swing will convert into kinetic energy at the lowest point of the arc.
Step 1: Calculate the initial height (h) above the lowest point of the arc
h = L - L*cos(angle) = 3m - 3m*cos(45°) = 3m - 3m*(√2/2) = 3m(1 - √2/2)
Step 2: Calculate the initial potential energy (PE) at the highest point
PE = m*g*h = 20kg * 9.81m/s² * 3m(1 - √2/2)
Step 3: At the lowest point, the kinetic energy (KE) equals the initial potential energy (PE)
KE = 0.5*m*v1² = PE
0.5*20kg*v1² = 20kg * 9.81m/s² * 3m(1 - √2/2)
Step 4: Solve for v1
v1² = 2 * 9.81m/s² * 3m(1 - √2/2)
v1 = √[2 * 9.81m/s² * 3m(1 - √2/2)]
v1 ≈ 2.94 m/s (using two significant figures)
So, the child's speed at the bottom of the arc is approximately 2.94 m/s.

learn more about speed here

https://brainly.com/question/14666895

#SPJ11

The molar mass of the gas is approximately 0.320 g/mol.

To calculate the molar mass of a gas, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

We are given the pressure, temperature, and volume of a gas, as well as the mass of the gas. We can use this information to calculate the number of moles of gas using the following equation:

n = (m/M) x (RT/PV)

where m is the mass of the gas, M is the molar mass of the gas, R is the gas constant, T is the temperature in Kelvin, P is the pressure, and V is the volume.

First, we need to convert the given pressure and temperature to their corresponding SI units.

45 °C + 273.15 = 318.15 K (temperature in Kelvin)

388 torr = 0.511 atm (pressure in atm)

Next, we can calculate the number of moles of gas:

n = (m/M) x (RT/PV)

n = (206 ng / M) x [(0.0821 L atm/(mol K)) x 318.15 K / (0.511 atm) x 0.206 x 10⁻⁶ L]

n = (206 ng / M) x 0.007838

n = 1.612 x 10⁻⁹ (ng/mol) x M

Solving for M, we get:

M = (206 ng / n) x (1/1,000,000 g/ng) / 1 mol

M = 0.320 g/mol

Learn more about molar mass.

brainly.com/question/22997914

#SPJ11

The average kinetic energy of nitrous oxide (N2O) molecules at 30.0°C is approximately 0.0808 kJ/mol. Option (a) 0.906 kJ/mol is closest to the calculated value.

The average kinetic energy of a molecule can be calculated using the formula:

KE = (1/2) xm x v²

where KE is the kinetic energy, m is the mass of the molecule, and v is the velocity of the molecule.

To calculate the average kinetic energy of nitrous oxide (N₂O) molecules at 30.0°C, we can use the following steps:

Calculate the root-mean-square (RMS) velocity of the molecules using the formula:

VRMS = sqrt(3kT/m)

where k is the Boltzmann constant (1.38 × 10⁻²³ J/K), T is the temperature in Kelvin (30.0°C = 303.15 K), and m is the mass of a nitrous oxide molecule (44.013 g/mol).

vrms = sqrt(3 x 1.38e-23 J/K x 303.15 K / 0.044013 kg/mol) = 442.9 m/s

Calculate the kinetic energy of a single molecule using the formula:

KE = (1/2) x m x v²

KE = (1/2) x 0.044013 kg/mol x (442.9 m/s)² = 4.86e-20 J

Convert the kinetic energy to kilojoules per mole (kJ/mol) using the conversion factor:

1 J/mol = 1/1000 kJ/mol

KE/mol = 4.86e-20 J x (1 mol/6.022e23 molecules) x (1/1000 kJ/J) = 0.0808 kJ/mol

Therefore, the average kinetic energy of nitrous oxide (N₂O) molecules at 30.0°C is approximately 0.0808 kJ/mol. Option (a) 0.906 kJ/mol is closest to the calculated value.

To know more about Boltzmann constant, visit:

https://brainly.com/question/30639301

#SPJ1

Based on the given information, the tension developed in the cable when s=15m is 276.96 N.

To determine the tension developed in the cable, we need to first find the acceleration of the crate. We can use the formula F_net = ma, where F_net is the net force acting on the crate, m is the mass of the crate, and a is the acceleration.

The net force acting on the crate is the force due to tension in the cable minus the force due to kinetic friction. So we have:

[tex]F_{net}[/tex] = T - [tex]F_{k}[/tex]

where T is the tension in the cable and f_k is the force due to kinetic friction. The force due to kinetic friction is given by:

[tex]F_{k}[/tex] = Uk * N

where N is the normal force, which is equal to the weight of the crate:

N = mg

where g is the acceleration due to gravity, which is approximately 9.81 m/s^2.

So we have:

[tex]F_{k}[/tex] = Uk * mg

Substituting this into the equation for [tex]F_{net}[/tex], we get:

[tex]F_{net}[/tex] = T - Uk * mg

We can now use the formula [tex]F_{net}[/tex] = ma to find the acceleration:

ma = T - Uk * mg

a = (T - Uk * mg) / m

We can now use the given rate at which the motor draws in the cable to find the acceleration in terms of s:

v = (0.05[tex]s^{3/2}[/tex]) m/s

Taking the derivative with respect to time, we get:

a = dv/dt = (0.75[tex]s^{1/2}[/tex]) m/s^2

Setting these two expressions for acceleration equal to each other, we get:

(T - Uk * mg) / m = (0.75[tex]s^{1/2}[/tex]) m/s^2

Substituting in the given values for the mass of the crate and the coefficient of kinetic friction, we get:

(T - 0.2 * 20 kg * 9.81 m/s^2) / 20 kg = (0.75 * 15 [tex]m^{1/2}[/tex]) m/s^2

Simplifying and solving for T (tension), we get:

T = 276.96 N

For more such questions on Tension.

https://brainly.com/question/31324309#

#SPJ11

The minimum time you should allow for changing the current is approximately 0.000788 seconds. To find the minimum time required to change the current through the inductor, we can use the formula:

t = (ΔI * L) / V, where t is the time, ΔI is the change in current, L is the inductance, and V is the potential difference.

First, let's calculate the change in current (ΔI):
ΔI = I_final - I_initial = 2.5 A - 1.1 A = 1.4 A

Now, we can plug in the given values into the formula:
t = (1.4 A * 220 mH) / 390 V

Note that we need to convert 220 mH to H:
220 mH = 0.220 H

Now, we can calculate the time:
t = (1.4 A * 0.220 H) / 390 V ≈ 0.000788 seconds

Therefore, the minimum time you should allow for changing the current is approximately 0.000788 seconds.

For more such questions on Change in current, visit:

brainly.com/question/28574212

#SPJ11

(a) To find the intensity 8.0 m from the source, we can use the formula:

Intensity = Power / (4πr^2)

where r is the distance from the source. Plugging in the values, we get:

Intensity = 125 / (4π x 8^2)
Intensity = 0.061 W/m^2

(b) To find the intensity level in decibels (dB), we can use the formula:

Intensity level (dB) = 10 log10 (I/I0)

where I is the intensity of the sound wave and I0 is the reference intensity, which is 1 x 10^-12 W/m^2. Plugging in the values, we get:

Intensity level (dB) = 10 log10 (0.061/1 x 10^-12)
Intensity level (dB) = 104.6 dB

(c) To find the distance at which the sound would be at the threshold of pain (120 dB), we can rearrange the formula from part (b) to solve for the distance:

distance = sqrt(Power / (4π x I0 x 10^(IL/10)))

where IL is the intensity level in dB (which is 120 dB) and all other variables are the same as before. Plugging in the values, we get:

distance = sqrt(125 / (4π x 1 x 10^-12 x 10^(120/10)))
distance = 0.038 m or 3.8 cm

Therefore, at a distance of 3.8 cm from the loudspeaker, the sound would be at the threshold of pain.

Visit https://brainly.com/question/30101270 to learn more about Sound  Intensity

#SPJ11

[tex]3.0 *10^13[/tex] electrons flow through a transistor in 2.50 ms.The current through the transistor is 1.2 A.

To find the current through the transistor, we can use the formula I = Q/t, where I is the current, Q is the charge, and t is the time.

Given that [tex]3.0 * 10^13[/tex]  electrons flow through the transistor in 2.50 ms, we can calculate the charge as:

Q = ne

where n is the number of electrons and e is the charge of an electron.

[tex]Q = (3.0 * 10^13) * (1.6 * 10^-19) = 4.8 * 10^-6 C[/tex]

Substituting this into the formula for current, we get:

[tex]I = Q/t = (4.8 * 10^-6 C) / (2.50 * 10^-3 s) = 1.2 A[/tex]

Therefore, the current through the transistor is 1.2 A.

learn more about electrons here:

https://brainly.com/question/1255220

#SPJ11

The specific heat of the substance is 0.804 J/g*K.

To solve for the specific heat of the substance, we can use the formula:

q = mCΔT

where q is the amount of heat absorbed, m is the mass of the substance, C is the specific heat of the substance, and ΔT is the change in temperature.

Plugging in the given values:

q = 2593 J
m = 38.33 g
ΔT = 167.2 - 29.2 = 138 K

Solving for C:

C = q / (mΔT)
C = 2593 J / (38.33 g * 138 K)
C = 0.804 J/g*K
Here you can learn more about specific heat

https://brainly.com/question/14515276#

#SPJ11  

The Kinetic Energy  of the saturn V rocket is 1.6 x 10¹¹ J

The kinetic energy of the Saturn V rocket with an Apollo spacecraft attached can be calculated using the formula:

Kinetic Energy = (1/2) x mass x velocity²

where mass is the combined mass of the rocket and spacecraft, and velocity is the speed reached by the rocket.

Substituting the given values, we get:

Kinetic Energy = (1/2) x 2.9x10⁵ kg x (11.2 km/s)²

Converting the speed to meters per second (m/s) and simplifying the expression, we get:

Kinetic Energy = 1.6 x 10¹¹ J

Therefore, the Saturn V rocket with an Apollo spacecraft attached would have a kinetic energy of approximately 1.6 x 10¹¹ joules.

The large amount of kinetic energy is necessary to propel the spacecraft out of Earth's atmosphere and into space, and also to maintain its trajectory and speed during the mission

To know more about Earth's atmosphere click on below link:

https://brainly.com/question/13154099#

#SPJ11

The complement activation effector functions refer to a series of immune system reactions that help protect the body against infections and promote inflammation.

These functions involve three main pathways: the classical, lectin, and alternative pathways, they are initiated by various triggers, such as pathogen recognition, antibody-antigen interactions, or spontaneously through a process called "tick-over." Upon activation, a cascade of reactions occurs, producing complement proteins that mediate several effector functions. These include opsonization, which marks pathogens for phagocytosis by immune cells; lysis, where the membrane attack complex (MAC) punctures the pathogen's cell membrane, causing cell death; and chemotaxis, attracting immune cells to the site of infection.

Additionally, the complement system stimulates inflammation and enhances the adaptive immune response. In summary, complement activation effector functions play a crucial role in the immune system's defense against pathogens and modulate inflammation to help maintain the body's overall health.

Learn more about immune system at:

https://brainly.com/question/15029679

#SPJ11

The likelihood of price wars is influenced by various factors, except for offering differentiation. This wars is influenced by cost structure, market growth, customer loyalty, and escalating symmetry.

a. Offering differentiation: When products or services are significantly different from competitors, the likelihood of price wars decreases, as companies can focus on their unique selling points rather than price competition.
b. Cost structure: A firm's cost structure can affect price wars because companies with lower costs may have more flexibility to lower prices without sacrificing profitability, which can trigger a price war.
c. Market growth: In a rapidly growing market, the likelihood of price wars may decrease as companies focus on capturing new customers and expanding their market share rather than engaging in price competition.
d. Customer loyalty: High customer loyalty can also reduce the likelihood of price wars, as loyal customers are less likely to switch to competitors based on price alone.
e. Escalating symmetry: When competitors have similar cost structures and market positions, the likelihood of price wars may increase, as companies may try to gain an advantage through aggressive pricing strategies.

To learn more about price wars click here https://brainly.com/question/12995874

#SPJ11

Answer:

The correct option is (a): the reflected ray never intersects.

Explanation:

The answer to the query states that the net force on a particle is

76.6 N.

A particle is a relatively small component or amount of matter. It is the smallest part or component of an indivisible, unbreakable item. All matter is composed of particles, which also serve as the fundamental building blocks of all physical events. The shapes, sizes, and weights of particles vary, as do their interactions with one another. They can exist in a vacuum as well as in the states of solid, liquid, and gas.

The magnitude of the two forces, [tex]F_1[/tex] and [tex]F_2[/tex], is added to determine the net force acting on particle [tex]q_1[/tex]. [tex]F_1[/tex]  is the force that [tex]q_2[/tex] is applying

to  [tex]q_1[/tex], and it has a value of -14.4 N. Coulomb's Law can be used to compute [tex]F_2[/tex], which is the force that [tex]Q_1[/tex] exerts on [tex]Q_2[/tex]:

[tex]F_2 = k*q_1*q_2/r^2[/tex], where k is the Coulomb constant

[tex](8.99 x 10^9 Nm^2/C^2)[/tex], [tex]q_1[/tex] is the charge of [tex]q_1 (+7.70 \mu C)[/tex], [tex]q_2[/tex] is the charge of [tex]q_2[/tex] (-5.90 uC), and r is the distance between the charges

(0.30 m).

As a result of entering these values into the equation, us

[tex]F_2=(8.99 x 10^9 Nm^2/C^2)*(+7.70 \mu C)*(-5.90 uC)/(0.30 m)^2\\\\F_2=91 N[/tex]

Thus, the net force on particle [tex]q_1[/tex] is,

[tex]F_1+F_2=-14.4 N + 91 N\\\\F_1+F_2= 76.6 N[/tex]

To learn more about particle, visit:

brainly.com/question/27911483

#SPJ1

Star A is located 4 times farther from Earth than Star B, but both have same apparent visual magnitude of 1 mag. The star is intrinsically brighter is star A than star B, and it is 16 times brighter.

Star A must be emitting more light than Star B. The apparent visual magnitude of a star is a measure of how bright it appears from Earth, but it does not take into account the distance between the star and Earth. In contrast, intrinsic brightness, or absolute magnitude, takes into account the actual amount of light that a star emits. To determine the difference in intrinsic brightness between the two stars, we can use the inverse square law of brightness.

The inverse square law of brightness states that the brightness of an object decreases as the square of the distance from the object increases. In this case, since Star A is 4 times farther away from Earth than Star B, its brightness is decreased by a factor of (4)^2 = 16. Therefore, Star A must be 16 times brighter than Star B in order to have the same apparent visual magnitude. In summary, Star A is intrinsically brighter than Star B, and it is 16 times brighter.

Learn more about inverse square law at:

https://brainly.com/question/30562749

#SPJ11