The linear impulse delivered by the hit of a boxer is 287 N • s during the 0.523 s of contact.
What is the magnitude of the average force exerted on the glove by the other boxer?
Answer in units of N.

The frequency of the fifth harmonic of the guitar string is 700 Hz.

The frequency of the fifth harmonic of the guitar string can be calculated using the formula f_n = n(v/2L), where f_n is the frequency of the nth harmonic, v is the speed of sound in the string, L is the length of the string, and n is the harmonic number.

In this case, we know that the distance between the supports is 60 cm, which is half the length of the string (since the standing wave has three antinodes). Therefore, the length of the string is 2*60 cm = 120 cm = 1.2 m.

We also know that the frequency of the third harmonic is 420 Hz. Using the formula above, we can solve for the speed of sound in the string:

420 Hz = 3(v/2*1.2m)
v = (420 Hz * 2 * 1.2m)/3
v = 336 m/s

Now we can use the same formula to find the frequency of the fifth harmonic:

f_5 = 5(336 m/s/2*1.2m)
f_5 = 700 Hz

Therefore, the frequency of the fifth harmonic of the guitar string is 700 Hz.

Know more about Frequency here:

https://brainly.com/question/25867078

#SPJ11

The angle of refraction when a light ray incident from the air at an interface with glass at an angle of 45° to the normal is approximately 30°.

To find the angle of refraction when a light ray incident from the air (n = 1) at an interface with glass (n = 1.6) at an angle of 45° to the normal, we can use Snell's Law. Snell's Law states:
n1 * sin(θ₁) = n2 * sin(θ₂)
Where n1 and n2 are the refractive indices of the two media, θ₁ is the angle of incidence, and θ₂ is the angle of refraction.
1: Plug in the known values:
1 * sin(45°) = 1.6 * sin(θ₂)
2: Solve for sin(θ₂):
sin(θ₂) = sin(45°) / 1.6
3: Calculate sin(45°) and divide by 1.6:
sin(θ₂) ≈ 0.5
4: Find the angle of refraction (θ₂) using the inverse sine function:
θ₂ = arcsin(0.5)
θ₂ ≈ 30°

Learn more about refraction: https://brainly.com/question/27932095

#SPJ11

The escape speed is the minimum speed required to escape the gravitational pull of an object, such as a planet or an asteroid. It is given by the formula: v = √(2GM/R) , Escape speed in this case is more than 2.22 km/s.

The mass of the asteroid can be calculated from its volume and density, using the formula: [tex]M = (4/3)πR^3ρ[/tex] where ρ is the density of the asteroid, and R is its radius. The radius of the asteroid is given as 395 km, or 395,000 meters. Plugging in the values for the radius and density, we get: [tex]M = (4/3)π(395000)^3(2360) = 1.79 x 10^20 kg[/tex]

Now that we know the mass of the asteroid, we can calculate the escape speed using the formula above. Assuming that we are measuring the escape speed at the surface of the asteroid, the distance R is equal to the radius of the asteroid.

Plugging in the values for G, M, and R, we get:[tex]v = √(2(6.6743 x 10^-11 m^3/(kg s^2))(1.79 x 10^20 kg)/(395000 m)) = 2.22 km/s[/tex] Therefore, the escape speed from an asteroid of diameter 395 km with a density of [tex]2360 kg/m^3[/tex] is approximately 2.22 km/s.

This means that any object, such as a spacecraft or a meteoroid, that wants to escape the gravitational pull of the asteroid needs to have a speed greater than 2.22 km/s.

Know more about escape speed here:

https://brainly.com/question/28608063

#SPJ11

The concentration of KI needed to exert an osmotic pressure of 202 torrs at 298 K is approximately 4.11 mol/L or 4.11 M.

To determine the concentration of KI needed to exert a specific osmotic pressure, we can use the van 't Hoff equation:

π = i * M * R * T

Where:

Rearranging the equation, we have:

M = π / (i x R x T)

Given:

π = 202 torr

i = 2 (for KI)

R = 0.0821 Latm/(molK)

T = 298 K

Substituting the values into the equation:

M = 202 torr / (2 x 0.0821 Latm/(molK) x 298 K)

M ≈ 4.11 mol/L or 4.11 M

Therefore, the concentration of KI needed to exert an osmotic pressure of 202 torrs at 298 K is approximately 4.11 mol/L or 4.11 M.

To know more about concentration follow

https://brainly.com/question/10847614

#SPJ6

We can use the formula for the magnetic torque on a current loop to solve this problem. The magnetic torque on a current loop is given below. So the magnetic torque on the loop is 426.6 N-m.

Here τ = NIA × B

Here τ is the torque, N is the number of turns, I is the current, A is the area of the loop, B is the magnetic field, and × denotes the vector cross product.

In this case, we have N = 150 turns,

I = 42 A,

A = (19.5 cm)

= 0.038025 , and B = 1.65 T.

We can find the direction of the torque by using the right-hand rule: if we curl the fingers of our right hand in the direction of the current in the loop and then point our thumb in the direction of the magnetic field, our thumb will point in the direction of the torque. In this case, the torque will be perpendicular to both the current and the magnetic field, so it will be perpendicular to the plane of the loop.

Plugging in the numbers, we get:

τ = (150)(42 A)(0.038025 ) × (1.65 T) = 426.6 N-m

Learn more about current visit: brainly.com/question/1100341

#SPJ4

Correct Question:

Consider a 150 turn square loop of wire 19.5 cm on a side that carries a 42 a current in a 1.65 t field. What is the magnitude of the torque in N·m

Explanation:

Heat lost by copper ball                         = heat gained by water  

(masses need to be in kg)

. 120 kg  *  387 J /(kg C)   *  (75-42 C)    =   .075 kg * 4186 J/(kg C) * (42-x  C)

.120 * 387 * 33 = .075* 4186* (42-x)

   shows x = 37.1 C = initial water temp

As a result, the freezer's maximum coefficient of performance (COP) is around 7.37.

The ratio of heat extracted from the cooled chamber to the work performed by the compressor is known as the coefficient of performance (COP) of a refrigerator or freezer. The highest COP is determined by the Carnot efficiency for a refrigerator or freezer operating between two thermal reservoirs at temperatures Th and Tc (where Th > Tc):

In this instance, the outside temperature is Th = 29°C, or 302 K, while the freezer's internal temperature is Tc = -12°C, or 261 K. When we enter these values into the formula above, we obtain:

COP_max = Th / (Th - Tc)

COP_max = 302 K / (302 K - 261 K)

= 302 K / 41 K

≈ 7.37

Learn more about temperature visit: brainly.com/question/24746268

#SPJ4

As a result, the freezer's maximum coefficient of performance (COP) is around 7.37.

The ratio of heat extracted from the cooled chamber to the work performed by the compressor is known as the coefficient of performance (COP) of a refrigerator or freezer. The highest COP is determined by the Carnot efficiency for a refrigerator or freezer operating between two thermal reservoirs at temperatures Th and Tc (where Th > Tc):

In this instance, the outside temperature is Th = 29°C, or 302 K, while the freezer's internal temperature is Tc = -12°C, or 261 K. When we enter these values into the formula above, we obtain:

COP_max = Th / (Th - Tc)

COP_max = 302 K / (302 K - 261 K)

= 302 K / 41 K

≈ 7.37

Learn more about temperature visit: brainly.com/question/24746268

#SPJ4

The plasma frequency for the given material is approximately 5.64 x 10¹⁵ Hz.

The plasma frequency is given by the equation ω_p = √(Ne²/ε₀m), where N is the electron density, e is the elementary charge, ε₀ is the vacuum permittivity, and m is the electron mass.

In this case, N = 10²² cm⁻³, e = 1.602 x 10⁻¹⁹ C, ε₀ = 8.854 x 10⁻¹² F/m, and m = 9.109 x 10⁻³¹ kg.

First, we need to convert the electron density from cm⁻³ to m⁻³.

N = 10²² cm⁻³ = 10²⁸ m⁻³

Substituting these values into the plasma frequency equation, we get:

ω_p = √((10²⁸ x (1.602 x 10⁻¹⁹)^2)/(8.854 x 10⁻¹² x 9.109 x 10³¹))

Simplifying the expression, we get:

ω_p ≈ 5.64 x 10¹⁵ Hz.

Therefore, the plasma frequency for the given material is approximately 5.64 x 10¹⁵ Hz.

To know more about electron density click on below link:

https://brainly.com/question/28428748#

#SPJ11

The curve should be banked at an angle of approximately 9.6 degrees.

When a car is traveling along a banked curve, there are two forces acting on it: the force of gravity (which pulls the car down) and the normal force (which pushes the car towards the center of the curve). If the curve is banked at the correct angle, these two forces will combine to provide the necessary centripetal force to keep the car moving in a circular path. The formula for the centripetal force is:F_c = m v^2 / r.where F_c is the centripetal force, m is the mass of the car, v is its velocity, and r is the radius of the curve.

In the absence of friction, the necessary centripetal force is provided entirely by the normal force, which is perpendicular to the surface of the road. The normal force can be resolved into two components: one perpendicular to the surface of the road (which balances the force of gravity) and one parallel to the surface of the road (which provides the necessary centripetal force).The angle of the curve, θ, is related to the velocity of the car and the radius of the curve by the equation: tan(θ) = v^2 / (g r)where g is the acceleration due to gravity.

Substituting the given values, we get: tan(θ) = (56 mph)^2 / (32.2 ft/s^2 * 1000 ft)tan(θ) = 0.168Taking the inverse tangent of both sides, we get:θ = tan^-1(0.168)θ = 9.6 degrees. Therefore, the curve should be banked at an angle of approximately 9.6 degrees.the curve should be banked at an angle of approximately 9.6 degrees.

Learn more about A highway curve here:https://brainly.com/question/30336003

#SPJ11

(a) A concave mirror is a converging element.

(b) Light is observed to converge to a point after being reflected from a plane mirror. The incident rays were converging before striking the mirror.

(a) A concave mirror is a converging element. It has a curved surface that reflects light rays inward, causing them to converge at a single point known as the focal point. This makes concave mirrors useful for applications like focusing light or creating magnified images in telescopes and makeup mirrors.

(b) In the case of a plane mirror, when light rays converge to a point after being reflected, it indicates that the incident rays were converging before striking the mirror. This is because plane mirrors only change the direction of light rays without altering their paths relative to each other. If the incident rays were parallel or diverging, they would maintain their parallel or diverging nature after reflection.

Here is a simple diagram to illustrate this:
```
Incident rays:       /   \
                   /     \
Plane mirror: ------------
Reflected rays:     \     /
                     \ /
```

In the diagram, the incident rays are converging before striking the plane mirror, and after reflection, they continue to converge to a point.

For more such questions on Concave mirror.

https://brainly.com/question/3359672#

#SPJ11

The axial compressive load that can be applied to the aluminum bar with both ends is 6,939 lbs. The axial compressive load that can be applied to the aluminum bar with one end built-in and the other unsupported is 14,714 lbs.

(A) For a pinned-pinned column, k = 1.0. Therefore, the critical load for buckling is:

[tex]P = (\pi^2 * E * I) / L^2P = (\pi^2 * 10 \times 10^6 psi * 2.67 in^4) / (20 in)^2[/tex]

P = 27,755 lbs

To account for a safety factor of 4, the allowable compressive load is:

Allowable load = P / 4 = 6,939 lbs

(B) For a fixed-free or built-in and unsupported column, k = 0.7. Therefore, the critical load for buckling is:

[tex]P = (\pi^2 * E * I) / (0.7 * L)^2P = (\pi^2 * 10 \times 10^6 psi * 2.67 in^4) / (0.7 * 20 in)^2[/tex]

P = 58,857 lbs

To account for a safety factor of 4, the allowable compressive load is:

Allowable load = P / 4 = 14,714 lbs

Deflection refers to the bending or deformation of a structural element under the action of an external load. It is a common phenomenon that occurs in various engineering applications, such as bridges, buildings, and machines. When a load is applied to a structural element, such as a beam or column, it experiences stress, which results in deformation or bending.

The amount of deflection that occurs in a structural element depends on various factors such as the magnitude and direction of the load, the material properties of the structural element, and the geometry of the element. Deflection is an important consideration in the design of any structural system because excessive deflection can result in failure or collapse of the structure.

To learn more about Deflection visit here:

brainly.com/question/14127309

#SPJ4

For the transition from solid to liquid, ΔH is positive (endothermic process), so V₂ - V₁ must be negative (liquid water is more dense than ice). As a result, liquid water has a density that is higher than ice.

a) From the definition of the Gibbs free energy, we have:

dG = -S dT + V dP

At coexistence, we have G(P,T) = G(P,T).

∂G/∂T|P = ∂G/∂T|P

(∂G/∂P|T) (dP/dT) = - (∂G/∂T|P)

At coexistence, the two phases have the same Gibbs free energy, so we can write:

(∂G/∂P|T) (dP/dT) = - (∂G/∂T|P) = S

Rearranging, we get:

dP/dT = - (S / (∂G/∂P|T))

b) From the definition of the latent heat of a phase transition, we have:

ΔH = TΔS - PΔV

At coexistence, we have ΔG = 0, so ΔG = ΔH - TΔS = 0. Solving for ΔS, we get:

ΔS = ΔH / T

Using the Maxwell relation (∂S/∂P)_T = (∂V/∂T)_P, we can write:

(∂G/∂P|T) = - S / (∂S/∂P|T) = - V / (∂V/∂T|P)

Substituting these expressions into the result from part a), we get:

dP/dT = (ΔH / T) / (V₂ - V₁)

where V₁ and V₂ are the volumes of phases and 2, respectively.

c) Assuming the gas phase is an ideal gas, we can write:

PV = nRT

Taking the derivative of both sides with respect to T at constant P, we get:

V dP/dT + P = nR/ P

Solving for dP/dT, we get:

dP/dT = (nP/ V²) [(∂V/∂T)_P - (R/V)]

At coexistence, we have ΔG = 0, so ΔG = ΔH - TΔS = 0. Solving for ΔH and using the relation ΔV ≈ V₂ - V₁ = V₂ (since the gas volume is much greater than the liquid volume), we get:

ΔH = TΔS = TΔ(V₂ - V₁) ≈ TV₂ΔV

Substituting this expression and the ideal gas law into the result from part c), we get:

dP/dT = nR/V₂

d) From the result in part b), we have:

dP/dT = (ΔH / T) / (V₂ - V₁)

Since the coexistence line has a negative slope, dP/dT is negative. Therefore, ΔH and V₂ - V₁ must have opposite signs.

An endothermic process is a chemical or physical change that absorbs heat from its surroundings. An endothermic process involves a system gaining energy from its surroundings, which lowers the ambient temperature. This process is the opposite of an exothermic reaction, which releases energy in the form of heat.

One common example of an endothermic process is the melting of ice. When heat is applied to ice, the ice absorbs the energy and begins to melt, but the temperature of the surroundings does not increase. Instead, the heat energy is absorbed by the ice, causing its molecules to move faster and eventually break free from their solid structure. Endothermic processes are also used in many industrial applications, such as refrigeration and air conditioning.

To learn more about Endothermic processvisit here:

brainly.com/question/4296300

#SPJ4

The magnitude of the charge is approximately 1.05×10^-7 Coulombs.

We can use the conservation of energy principle to determine the magnitude of the charge. According to this principle, the increase in kinetic energy of the charge is equal to the work done on the charge by the electric field:

ΔK = qΔV

where ΔK is the change in kinetic energy of the charge, q is the magnitude of the charge, and ΔV is the potential difference across which the charge is accelerated.

In this case, we are given ΔV = 550 V, ΔK = 6.0×10^-5 J - 2.0×10^-6 J = 5.8×10^-5 J. Substituting these values into the equation above, we get:

5.8×10^-5 J = q(550 V)

Solving for q, we get:

q = 5.8×10^-5 J / (550 V)

≈ 1.05×10^-7 C

Therefore,We can use the conservation of energy principle to determine the magnitude of the charge. According to this principle, the increase in kinetic energy of the charge is equal to the work done on the charge by the electric field:

ΔK = qΔV

where ΔK is the change in kinetic energy of the charge, q is the magnitude of the charge, and ΔV is the potential difference across which the charge is accelerated.

In this case, we are given ΔV = 550 V, ΔK = 6.0×10^-5 J - 2.0×10^-6 J = 5.8×10^-5 J. Substituting these values into the equation above, we get:

5.8×10^-5 J = q(550 V)

Solving for q, we get:

q = 5.8×10^-5 J / (550 V)

≈ 1.05×10^-7 C

Therefore, the magnitude of the charge is approximately 1.05×10^-7 Coulombs.

Read more on magnitude here:https://brainly.com/question/30337362

#SPJ1

The work done by the force that moves the charge is

[tex]-8 * 10^-6 J[/tex]

The work done (W) by an electric force when moving a charge (q) from one point to another is given by the equation:

W = qΔV

where ΔV is the difference in electric potential between the two points.

In this case, a 25 nC charge is moved from a point where V = 210 V to a point where V = -110 V. Therefore, the difference in electric potential is:

ΔV = Vfinal - Vinitial

ΔV = (-110 V) - (210 V)

ΔV = -320 V

Substituting this value and the charge q into the equation for work, we get:

W = qΔV

[tex]W = (25 * 10^-9 C) * (-320 V)

\\ W = -8 * 10^-6 J[/tex]

which is negative indicating that work is done by an external force to move the charge against the electric field.

learn more about work done here:

https://brainly.com/question/13662169

#SPJ11

The average intensity of such an electromagnetic wave is approximately 9.81 × 10^−12 W/m².

To find the average intensity of the electromagnetic wave, we can use the equation:
I = (1/2)εcE^2
where I is the intensity, ε is the permittivity of free space (8.85 × 10^-12 F/m), c is the speed of light (3 × 10^8 m/s), and

E is the peak electric field strength.

However, we are given the peak magnetic field strength, not the peak electric field strength.

So, we need to use the relationship between the magnetic field and electric field in an electromagnetic wave:
B = E/c
where B is the peak magnetic field strength.

Rearranging this equation, we can solve for E:
E = Bc

Substituting this into the equation for intensity, we get I = (1/2)εc(Bc)^2
Simplifying this expression, we get I = (1/2)εc^3B^2

Now we can plug in the given value for the peak magnetic field strength:
I = (1/2)(8.85 × 10^-12 F/m) (3 × 10^8 m/s)^3(2.5 × 10^-9 T)^2

Calculating this expression, we get:
I = 2.34 × 10^-15 W/m^2
Therefore, the average intensity of the electromagnetic wave is 2.34 × 10^-15 W/m^2.

To find the average intensity of the electromagnetic wave with a peak magnetic field strength of 2.5 × 10^−9 T, we can use the following formula:

Intensity (I) = (1/2) × μ₀ × c × B₀^2
where:
μ₀ = permeability of free space (4π × 10^−7 T·m/A)
c = speed of light in a vacuum (3 × 10^8 m/s)
B₀ = peak magnetic field strength (2.5 × 10^−9 T)

Substitute the given values into the formula:
I = (1/2) × (4π × 10^−7 T·m/A) × (3 × 10^8 m/s) × (2.5 × 10^−9 T)^2
I ≈ 9.81 × 10^−12 W/m²

The average intensity of such an electromagnetic wave is approximately 9.81 × 10^−12 W/m².

To learn more about electromagnetic:

brainly.com/question/23727978

brainly.com/question/31039466

#SPJ11

The angular momentum (in kg·m2/s) of an ice skater spinning at 6.00 rev/s given his moment of inertia is 0.430 kg·m2, is approximately 16.20 kg·m²/s.

The angular momentum is given by :

               Angular Momentum (L) = Moment of Inertia (I) × Angular Velocity (ω)

                                                  L= I * ω

We are given the moment of inertia (I) as 0.430 kg·m² and the spinning rate as 6.00 rev/s.

First, we need to convert the spinning rate from revolutions per second to radians per second, using the conversion factor 2π radians = 1 revolution:

            Angular Velocity (ω) = 6.00 rev/s × (2π radians/1 rev) ≈ 37.68 rad/s

Now, we can calculate the angular momentum (L):

            L = 0.430 kg·m² × 37.68 rad/s

               ≈ 16.20 kg·m²/s

So, the angular momentum of the ice skater spinning at 6.00 rev/s with a moment of inertia of 0.430 kg·m² is approximately 16.20 kg·m²/s.

Learn more about angular momentum here:

https://brainly.com/question/4126751

#SPJ11

An air capacitor is an electrical component made up of two flat, parallel plates separated by an insulating material such as air.

In this case, the plates are 1.50 mm apart and have a charge of 0.0180 μC when a potential difference of 200 V is applied across them. This indicates a capacitance of 0.12 μF (or 12 pF). The area of each plate can be calculated by dividing the charge by the potential difference, which yields 0.009 m2.

The maximum voltage that can be applied without the dielectric breakdown of the air is approximately 3 kV (3000 V). The total energy stored in the capacitor is calculated by multiplying the charge by the potential difference, resulting in 0.036 J (36 mJ).

know more about capacitor here

https://brainly.com/question/17176550#

#SPJ11

The angular momentum of the turntable is 0.065 kg·m^2/s.

The angular momentum of the turntable can be calculated using the formula L = Iω, where I is the moment of inertia and ω is the angular velocity. For a uniform disk, the moment of inertia can be calculated as I = (1/2)mr^2, where m is the mass and r is the radius.

Substituting the given values, we get:
I = (1/2)(4.92 kg)(0.088 m)^2 = 0.019 kg·m^2
ω can be calculated by multiplying the frequency by 2π:
ω = 2π(0.543 rev/s) = 3.413 rad/s
Therefore, the angular momentum of the turntable is:
L = Iω = (0.019 kg·m^2)(3.413 rad/s) = 0.065 kg·m^2/s

To learn more about Angular Momentum : https://brainly.com/question/29512279

#SPJ11

Answer:

(b)    the current must decrease exponentially with time.

The maximum current will flow when there is no voltage due to the capacitor - as the charge on the capacitor increases the back-voltage increases accordingly and the current in the circuit will decrease.

The momentum of the car can be calculated using the formula:

p = m*v

where p is the momentum, m is the mass of the car, and v is the speed of the car.

Substituting the given values, we get:

p = 1225 kg * 94.5 m/s

p = 115762.5 kg*m/s

Therefore, the momentum of the car is 115762.5 kg*m/s.

Among the answer choices, the closest value to this is 75000 kg*m/s, but it is not the correct answer. So none of the answer choices provided is correct.

To know more about momentum visit here :

https://brainly.com/question/2856266

#SPJ11

The RMS current in the circuit is 0.116 A. The magnitude of the impedance is used because the current is in phase with the voltage, so there is no phase shift. The unit of the current is amperes (A).

What is the RMS current in a circuit with a 120 μF capacitor?

The impedance of a capacitor in an AC circuit is given by:

Z = 1/(jωC)

where j is the imaginary unit, ω is the angular frequency in radians per second, and C is the capacitance in Farads.

In this problem, the capacitance is 120 μF, which is 0.00012 F, and the frequency is 130.0 Hz. So, the angular frequency is:

ω = 2πf = 2π × 130.0 = 816.8 rad/s

Plugging these values into the impedance formula, we get:

Z = 1/(j × 816.8 × 0.00012) = -214.9j Ω

Note that the impedance of a capacitor is purely imaginary and negative.

The RMS current in the circuit is given by Ohm's law:

I = V/RMSZ

where V/RMS is the RMS voltage of the generator.

In this problem, the RMS voltage is 25.0 V, so the RMS current is:

I = 25.0 / |-214.9j| = 25.0 / 214.9 = 0.116 A

The magnitude of the impedance is used because the current is in phase with the voltage, so there is no phase shift. The unit of the current is amperes (A).

To learn more about temperature, visit: https://brainly.com/question/30426519

#SPJ1

Energy transformation is the process of changing one form of energy into another form. It involves the conversion of energy from one form to another, such as mechanical energy to electrical energy or chemical energy to thermal energy. This process is fundamental to the functioning of the universe, and it occurs in natural and man-made systems alike.

Learn about energy transformation here https://brainly.com/question/30938355

#SPJ1

The wavelength of the radiation that was absorbed by the strong peak at 2550 cm⁻¹ is 392 nanometers.

To determine the wavelength of the radiation absorbed, we need to use the equation:

wavelength = speed of light / frequency

We can find the frequency by converting the wavenumber (cm⁻¹) to frequency (Hz) using the equation:

frequency = wavenumber x speed of light

The speed of light is a constant value of 2.998 x 10⁸ m/s.

Converting the wavenumber of 2550 cm⁻¹ to frequency:

frequency = 2550 cm⁻¹ x 2.998 x 10¹⁰ cm/s = 7.652 x 10¹³ Hz

Now we can use the frequency to calculate the wavelength:

wavelength = 2.998 x 10⁸ m/s / 7.652 x 10¹³ Hz = 3.92 x 10⁻⁶ meters or 392 nanometers

Therefore, the wavelength of the radiation absorbed is 392 nanometers.

Learn more about wavelength here: https://brainly.com/question/29213586

#SPJ11

The wavelength of the radiation that was absorbed by the strong peak at 2550 cm⁻¹ is 392 nanometers.

To determine the wavelength of the radiation absorbed, we need to use the equation:

wavelength = speed of light / frequency

We can find the frequency by converting the wavenumber (cm⁻¹) to frequency (Hz) using the equation:

frequency = wavenumber x speed of light

The speed of light is a constant value of 2.998 x 10⁸ m/s.

Converting the wavenumber of 2550 cm⁻¹ to frequency:

frequency = 2550 cm⁻¹ x 2.998 x 10¹⁰ cm/s = 7.652 x 10¹³ Hz

Now we can use the frequency to calculate the wavelength:

wavelength = 2.998 x 10⁸ m/s / 7.652 x 10¹³ Hz = 3.92 x 10⁻⁶ meters or 392 nanometers

Therefore, the wavelength of the radiation absorbed is 392 nanometers.

Learn more about wavelength here: https://brainly.com/question/29213586

#SPJ11

The charge on the capacitor 0.00100 s after the connection is made is approximately 49.3 μC.

To calculate the charge on the capacitor at a specific time, you can use the formula:

Q(t) = C * V * (1 - e^(-t / (R * C)))

where Q(t) is the charge at time t, C is the capacitance (10.0 F), V is the battery voltage (6.00 V), R is the resistance (120 Ω), and t is the time (0.00100 s).

1. Calculate the product of resistance and capacitance: RC = 120 Ω * 10.0 F = 1200 s.

2. Calculate the negative exponent term: -t / (RC) = -0.00100 s / 1200 s = -0.000000833.

3. Evaluate e^(-t / (RC)): e^(-0.000000833) ≈ 0.99917.

4. Subtract the result from step 3 from 1: 1 - 0.99917 ≈ 0.00083.

5. Multiply the result from step 4 by the product of capacitance and voltage: 0.00083 * (10.0 F * 6.00 V) ≈ 49.3 μC.

So, the charge on the capacitor 0.00100 s after the connection is made is approximately 49.3 μC.

To know more about capacitance click on below link:

https://brainly.com/question/28445252#

#SPJ11

Answer:

When a solar flare erupts on the surface of the sun, the light it produces travels at the speed of light, which is about 299,792,458 meters per second. This means that the light from the solar flare takes approximately 8 minutes and 20 seconds to reach Earth, assuming there are no significant obstructions in its path. Therefore, an astronomer on Earth would typically see the light from a solar flare about 8 minutes and 20 seconds after it occurs on the surface of the sun.

The coil's induced emf is expressed as follows:

[tex]$emf = -480 \pi H \cos (120 \pi t)$[/tex]

Calculation-

[tex]$emf = -L \frac{di}{dt}$[/tex]

where L is the self-inductance of the coil, i is the current passing through the coil, and [tex]$\frac{di}{dt}$[/tex] is the rate of change of the current with respect to time.

Substituting the given values, we get:

[tex]$i(t) = (2.0 A) \sin (120 \pi t)$[/tex]

[tex]$\frac{di}{dt} = (2.0 A) \times (120 \pi) \cos (120 \pi t)$$emf = -L \frac{di}{dt} = -2.0 H \times (2.0 A) \times (120 \pi) \cos (120 \pi t)$[/tex]

Therefore, the expression for the emf induced in the coil is:

[tex]$emf = -480 \pi H \cos (120 \pi t)$[/tex]

to know more about self-inductance here:

brainly.com/question/28167218

#SPJ1

The efficiency of the engine is 1.57%.

Efficiency is a measure of how well a system converts input energy into useful output energy. It is calculated as the ratio of useful output energy to the total input energy.

To find the efficiency of the engine, we need to calculate the work done by the engine and the heat absorbed from the reservoirs during the cycle.

Step 1: Isothermal expansion at 325 K from 16.1 L to 31.5 L

Since this is an isothermal process, the temperature remains constant at 325 K. The work done by the engine during this process is given by:

W1 = nRT ln(V2/V1)

where n is the number of moles of the gas, R is the universal gas constant, and T is the temperature in kelvin.

n = 1 mol

R = 8.314 J/mol/K

T = 325 K

V1 = 16.1 L

V2 = 31.5 L

W1 = (1 mol)(8.314 J/mol/K)(325 K) ln(31.5 L/16.1 L)

W1 = 4527.6 J

The heat absorbed from the reservoir during this process is given by:

Q1 = W1 = 4527.6 J

Step 2: Cooling at constant volume to 163 K

Since this is a constant volume process, no work is done by the engine. The heat absorbed from the reservoir during this process is given by:

Q2 = nCvΔT

where Cv is the heat capacity at constant volume and ΔT is the change in temperature.

n = 1 mol

Cv = 21 J/K

ΔT = 163 K - 325 K = -162 K

Q2 = (1 mol)(21 J/K)(-162 K)

Q2 = -3402 J

Step 3: Isothermal compression to its original volume of 16.1 L

Since this is an isothermal process, the temperature remains constant at 163 K. The work done on the engine during this process is given by:

W3 = -nRT ln(V2/V1)

where V1 = 31.5 L and V2 = 16.1 L.

n = 1 mol

R = 8.314 J/mol/K

T = 163 K

V1 = 31.5 L

V2 = 16.1 L

W3 = -(1 mol)(8.314 J/mol/K)(163 K) ln(16.1 L/31.5 L)

W3 = -4456.5 J

The heat released to the reservoir during this process is given by:

Q3 = -W3 = 4456.5 J

Step 4: Heating at constant volume to its original temperature of 325 K

Since this is a constant volume process, no work is done by the engine. The heat released to the reservoir during this process is given by:

Q4 = nCvΔT

where Cv is the heat capacity at constant volume and ΔT is the change in temperature.

n = 1 mol

Cv = 21 J/K

ΔT = 325 K - 163 K = 162 K

Q4 = (1 mol)(21 J/K)(162 K)

Q4 = 3402 J

The net work done by the engine is given by the sum of the work done during steps 1 and 3:

Wnet = W1 + W3 = 4527.6 J - 4456.5 J = 71.1 J

The net heat absorbed from the reservoirs is given by the sum of the heat absorbed during steps 1 and 2, and the sum of the heat released during steps 3 and 4:

Qnet = Q1 + Q2 + Q3 +Q4 = 4527.6 J - 3402 J + 4456.5 J - 3402 J = 2179.1 J

The efficiency of the engine is given by:

η = Wnet/Q1 = 71.1 J/4527.6 J = 0.0157 or 1.57%

Therefore, the efficiency of the engine is 1.57%.

To learn more about the Carnot cycle click:

brainly.com/question/13153440

#SPJ1

The power at velocity of the engine must first be converted from horsepower to watts: Therefore, 16.69 seconds are needed for the lift.

Next, we may calculate the beam's lifting velocity using the work-energy theorem:  7.06 hp x 746 W/hp = 5271.76 W

W = ΔE = mgh

Here W is the work done by the motor, ΔE is the change in potential energy of the beam, m is the mass of the beam, g is the acceleration due to gravity, and h is the height the beam is lifted.

The velocity of the beam:

ΔE = mgh

W = ΔE/t

t = ΔE/W

v = √(2gh)

given values:

ΔE = mgh = 243 kg x 9.81 [tex]m/s^2[/tex] x 37.1 m = 88051.47 J

W = 5271.76 W

t = ΔE/W = 88051.47 J / 5271.76 W = 16.69 s

v = √(2gh) = √(2 x 9.81 m/s^2 x 37.1 m) = 26.03 m/s

Learn more about velocity visit: brainly.com/question/24445340

#SPJ4

If the direction of the current is changed, the measurement of the system being measured could potentially change.

The direction of the current can affect the flow of electricity through the system, which can in turn affect any measurements being taken.

For example, if you were measuring the voltage of a circuit, changing the direction of the current could change the voltage being measured. It's important to carefully consider the direction of the current when taking measurements to ensure accuracy and consistency in your results.

Learn more about measurements at

https://brainly.com/question/2107310

#SPJ11