Answer:
Option D is good to go!
Explanation: as per the reactivity series more reactive substances will react with the counterpart substance.The most reactive substance here is calcium while the least reactive is aluminium, the magnesium comes in between.As per their reactivity, these substances will react with oxygen.
Explanation:
How many moles of oxygen gas are consumed in the production of 5.00 g of iron(III) oxide from metallic iron? 4Fe(s)+3O2(g)→2Fe2O3(g) _____ mole(s) O2
Answer:
0.0469 mol of 02.
Explanation:
The balanced equation of this reaction is given as follows:
4Fe(s) + 3O2(g) → 2Fe2O3(s)
According to this equation, 3 moles of oxygen gas (O2) is consumed to produce 2 moles of iron(III) oxide (Fe2O3).
Using the formula, mole = mass/molar mass to convert mass of Fe2O3 to mole
Molar mass of Fe2O3 = 56(2) + 16(3)
= 112 + 48
= 160g/mol
mole = 5.00 g ÷ 160g/mol
mole = 0.03125mol of Fe2O3
Since 3 moles of oxygen gas (O2) is consumed to produce 2 moles of iron(III) oxide (Fe2O3).
0.03125mol of Fe2O3 will be produced when (0.03125 × 3/2) mol of oxygen gas is consumed.
0.03125 × 3/2
0.03125 × 1.5
= 0.0469 mol of 02.
which of the following is a property of acids
A. they are slippery
B. They taste bitter
C. They react with oils
D. they are sour
Answer:
They are sour. =)
Explanation:
The atoms of which element bond to one another in chains, rings, and networks?
1.
barium
2.
carbon
3.
iodine
4.
mercury
Submit An:
Which of the following is not a compound? HCl Cl2 NaCI CO2
Answer:
CO2 it is an element.
Hope it helps:)
Why nitration of benzene is easier than that of benzene......... And how is phenol converted to TNT
Answer:
The nitration of phenol is easier than that of benzene because benzene has delocalised pie-electrons which makes it more stable than phenol.
Phenol is converted to Trinitrotoluene by adding zinc dust to remove the hydroxyl group, then reacted with Aluminium oxide followed by haloalkane.
What chemical reaction happens when water breaks down into hydrogen and oxygen
Answer:
bldg licking no-good also
Answer:
Water splitting is the chemical reaction in which water is broken down into oxygen and hydrogen: 2 H2O → 2 H2 + O. Efficient and economical water splitting would be a technological breakthrough that could underpin a hydrogen economy, based on green hydrogen.
Q.does salt make water boil at a higher temperature?
Answer:
Yes
Explanation:
The salt increases the boiling point, meaning it make water boil at a higher temperature, and it decreases the specific heat capacity, meaning it will heat up quick.
Please help! I don't know how to do and want to understand
What is the volume of .750 M hydrochloride acid required to react completely with 25.00 mL of .290 M NaOH solution?
from
HCl + NaOH----> NaCl +H2O
n of acid=1
n of base=1
Molarity of acid=750M
Molarity of base=290M
volume of base=25ml
from
Va=Mb ×vb×na
Ma×nb
Va=290×25×1
750×1
Va=7250
750
Va=9.67ml
The volume of .750 M hydrochloride acid is required to react completely with 25.00 mL of .290 M NaOH solution is 9.67ml
HCl + NaOH----> NaCl +H2O
n of acid=1
n of base=1
Molarity of acid=750M
Molarity of base=290M
volume of base=25ml
Therefore,
Va=Mb ×vb×na
Ma×nb
Va=290×25×1
750×1
Va=7250
750
Hence,
Va=9.67ml
What is Hydrochloric acid?
Hydrochloric acid, also known as muriatic acid, is an aqueous solution of hydrogen chloride. It is a colorless solution with a distinctively pungent smell. It is classified as a strong acid. It is a component of the gastric acid in the digestive systems of most animal species, including humans. Hydrochloric acid is an important laboratory reagent and industrial chemical.
Learn more about Hydrochloric acid
https://brainly.com/question/27808720
#SPJ2
Will give brainliest
Process name of water vapor to ice
Answer:
Deposition
this is the process of a substance changing its state from gas to solid. Solid to gas is known as sublimation
the act of salt and sugar dissapering in water is called
Answer:
dissolving
Explanation:
Answer:
dissoliving
Explanation:
salt and sugar are both soluble
Part C
For each source of energy, describe its strengths and weaknesses with respect to the ideal source you described in part A. Do Internet research, as needed, to describe each energy source.
Question 1
Describe at least two advantages and two disadvantages of using natural gas as a source of energy.
Answer:
See explanation
Explanation:
Natural gas is mined along with crude oil in many oil wells. It has the advantage of being a cheap fossil fuels which is easily obtainable.
Generally, natural gas is the cleanest of all the fossil fuels. This means that it is the fossil fuel that least contributes to environmental pollution.
On the other hand; natural gas produces some amount of sulphur as it is burnt and mercury as particulate matter. These substances are quite dangerous to health.
Secondly, the combustion of natural gas leads to the production of the oxides of nitrogen which play a key role in the occurrence of photochemical smog.
PLEASE HELP
Why can you not create a Punnett square to determine the height of an individual?
Answer:
Punnett squares do not provide accurate predictions on the distribution of phenotypes in offspring. ... This makes it difficult to make predictions regarding Down's syndrome since it cannot predict the prevalence of the offspring's genotypes about a population.
Explanation:
Limitations of Punnett squares as models of inheritance include the lack of information about likely variation in small samples such as individual families and the lack of information about population prevalence of parental genotypes (so no predictions can be made about population prevalence of offspring genotypes.
_ As + _ NaOH → _Na3AsO3 + _H2
Do you think it matters if you
report 150 grams as 150
grams or 150.0 grams? Do
they mean the same thing?
Why or why not?
Answer:
yes I do think they mean the same thing
Explanation:
150 grams and 150 grams is the same thing and adding 0 to the end of a decimal does not change its value, you could even put 150.0000000 grams and it would still be equivalent to the other numbers
I HAVE 5 MINUTES LEFT ON THIS TEST PLEASE HELP
Mr. Marcum is a research chemist who is testing a sample to determine its properties. He moved the sample from one container to another.
sample kept the same volume, but its shape changed. From the behavior of the sample, Mr. Marcum knows that the particles that make up
sample touch each other but are free to slide by each other. What is the state of this sample?
O
A gas
O
B.liquid
C. plasma
D. Solid
Answer:
liquid
Explanation:
In which classification of matter are the components chemically combined?
A metal
B compound
C mixture
D Metalloids
HELPPPP pleaseeeeee!!!!
Answer:
Length=Meter
Mass=Kilogram
Time=Second
Explanation:
Si is the International System of Units and means not just the U.S metric system.
Hope this helps and Please mark as Brainliest
At which of the four labeled points on the titration curve below do you expect to find the highest concentration of hydroxide
ions?
A
B
C
D
Answer:
D.
Explanation:
Hydroxide ions are produced when acid reacts with a base under a Ph value of more than 7. Hydroxide ions are negatively charged ions which are released in the aqueous solution during titration process. It a oxygen and hydrogen atom covalent bond.
Why do scientists use scientific notation? A. It provides an easier way to write the element names. B. It provides an easier way to write chemical formulas. C. It provides an easier way to write scientific words. D. It provides an easier way to write very large and very small numbers.
Answer:
D
Explanation:
Scientists will use a scientific notation because, it provides the easier way to write a very large and very small numbers. Option D is correct.
Scientists use scientific notation to express numbers that are extremely large or small. Scientific notation allows for a more concise representation of these numbers by expressing them as a product of a coefficient and a power of 10.
For very large numbers, scientific notation makes it easier to handle and compare values. It allows scientists to focus on the significant digits and the scale of the number without having to write out all the zeros. It also simplifies calculations and reduces the chance of errors when dealing with such large values.
Similarly, for very small numbers, scientific notation provides a convenient way to express values without writing out a large number of decimal places. It allows scientists to express the magnitude of the number in a concise manner and enables easier comparison and calculations with other values.
Scientific notation is widely used in scientific fields such as physics, chemistry, astronomy, and engineering, where dealing with numbers of varying magnitudes is common. It provides a standardized and efficient way to represent and work with very large and very small numbers.
Hence, D. is the correct option.
To know more about scientific notation here
https://brainly.com/question/16936662
#SPJ2
Lussac's Law, the pressure of a gas increases due to an increase in temperature because Group of answer choices the molecules strike the walls of the container more often. there is an increase in the number of gas particles. there is a decrease in the volume of the container. the molecules get bigger. the molecules strike the walls of the container less often. PreviousNext
Answer:
the molecules strike the walls of the container more often.
Explanation:
The pressure of a gas refers to the force per unit area exerted on the walls of container by gas molecules.
Since the average kinetic energy of gas molecules increases as the temperature of the gas increases, the molecules of the gas tend to strike the walls of the container more often as the temperature of the gas increases.
Hence, the pressure of a gas increases due to an increase in temperature because the gas molecules strike the walls of the container more often.
Compound
a)magnesium+carbon+oxygen
b)copper+sultry+oxygen
c)barium+nitrogen+oxygen
True or false:
The following equation is balanced properly: 6CO2 + 6H2O → C6H12O6 + O2
Copper(II) sulfate is an active ingredient in tree stump remover. In order to help remove
a tree that was causing foundational damage to a school, a chemistry student soaked
the roots with copper(ll) sulfate. The removed tree was later dried and used as
firewood. Assuming the copper(II) sulfate is present in the wood, what color would be
observed in the fire?
Answer:
the tree red
Explanation:
Copper (II) substances burn to produce bluish-green flames.
Flame test for copper (II)The copper (II) present in the wood will make the flame produce a bluish-green color.
This is because copper (II) compounds are known to produce flame colors that range from blue to bluish-green when tested in the laboratory.
This is because the electrons in the atoms of copper lose energy and drop to lower energy, releasing the lost energy as light in the process.
More on flame tests can be found here: https://brainly.com/question/6357832
#SPJ2
how many moles of H2 are required to make 10 moles of water?
Explanation:
10 moles h20 is required
10 moles of H₂ are required to make 10 moles of H₂O.
What is Stoichiometry ?Stoichiometry is an important concept which helps us use the balanced chemical equation to measures the amount of reactants and products.
What is Balanced Chemical equation ?A balanced chemical equation is chemical equation that has equal number of atoms on both sides of arrow that is reactant and product.
First we have to write the Balanced chemical equation
2H₂ + O₂ → 2H₂O
To produce 2 moles of water, 2 moles of hydrogen are required to produce 10 moles of water.
So,
[tex]\frac{2\ \text{moles of}\ H_2}{2\ \text{moles of}\ H_2O}[/tex] × 10 moles of H₂O
= 10 moles of hydrogen are required.
Thus, from above conclusion we can say that 10 moles of H₂ are required to make 10 moles of H₂O.
Learn more about the Stoichiometry here: https://brainly.com/question/14935523
#SPJ2
What are the names of those?
Answer:
formula tree
Explanation:
Compare the following in the three states of matter
a) inter particle space
b)inter particle force of attraction
c)particle motion
Explanation:
Anything that occupies space and has mass is called matter.
(a) Inter particle space
Solids - Atoms of a solid substance are closely packed with each other due to which there is very less or no inter particle space.Liquids - Atoms of a liquid are little loosely packed due to which there is some inter particle space.Gases - Atoms of a gas are very loosely packed due to which there is large inter particle space.(b) Inter particle force of attraction
Solids - Atoms of a solid are attached to each other by strong force of attraction.Liquids - Atoms of a liquid have slightly less force of attraction as compared to a solid substance.Gases - Atoms of a gas have Vander waal forces. Hence, there is no inter particle force of attraction between atoms of a gas.(c) Particle motion
Solids - There is low or negligible particle motion between atoms of a solid.Liquids - There is high particle motion as compared to that present in a solid.Gases - There is very high particle motion as compared to solids and liquids.What is Photosynthesis?
Answer:
Photosynthesis is the process by which green plants and certain other organisms transform light energy into chemical energy. During photosynthesis in green plants, light energy is captured and used to convert water, carbon dioxide, and minerals into oxygen and energy-rich organic compounds.
Photosynthesis is a process by which plants and other organisms, such as algae, convert solar energy into chemical energy and use it to produce organic molecules. Photosynthesis is the main source of energy in the biosphere.
How many molecules of oxygen are in the cylinder
Answer:
A gas cylinder contains exactly 15 moles of oxygen gas (02)
Number of molecules in 16 grams of h2co3
For this one u can work out the amount of moles in h2co3 by using moles=mass/mr(of h2co3 is 52)
so 16/62=0.258moles then u use the equation
number of particle = moles × 6.02×10^23
=0.258×6.02 ×10^23
=1.55×10^23 molecules.
hope this helps