Suppose the characteristic equation for an ODE is(r−1)2(r−2)2=0. a) Find such a differential equation. b) Find its general solution. please show all work and clearly label answer

The solution to the equation for x is given as follows:

x = 2.92.

The equation for x in this problem is solved applying the proportions of the problem.

The equivalent side lengths are given as follows:

Hence the proportional relationship to obtain the value of x is given as follows:

27/21 = (9x - 19)/(-9x + 83)

Applying cross multiplication, we obtain the value of x as follows:

21(9x - 19) = 27(-9x + 83)

432x = 1263

x = 1263/432

x = 2.92.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

We use integration by calculating the area of the elliptical cross-section and the height of the wedge. Setting up the integral, solving it using u-substitution, and simplifying it, the volume of the wedge is 5000*pi/243 cubic units.

To find the volume of the wedge cut from the elliptical cylinder x^2 + 9y^2 = 25 by the planes z = 0 and z = 3x that is above the xy-plane, we first need to visualize the shape. The elliptical cylinder is a three-dimensional shape that looks like a stretched-out cylinder, with an elliptical cross-section. The plane z = 0 is the xy-plane, which is the flat surface at the bottom of the cylinder. The plane z = 3x is a diagonal plane that intersects the cylinder at an angle. The wedge that we need to find the volume of is the portion of the cylinder that is above the xy-plane and below the plane z = 3x.

To find the volume of this wedge, we need to use integration. We will integrate over the x and y dimensions to find the volume of the shape. We start by finding the limits of integration. The elliptical cylinder has a horizontal axis of length 5 (the square root of 25) and a vertical axis of length 5/3 (the square root of 25/9). We can use these dimensions to set the limits of integration. We will integrate over the x dimension from -5/3 to 5/3 (the limits of the elliptical cross-section) and over the y dimension from -sqrt((25-x^2)/9) to sqrt((25-x^2)/9) (the limits of the elliptical cross-section at each value of x).

Now we need to set up the integral to find the volume. The volume of a wedge can be calculated using the formula V = (1/3)Bh, where B is the area of the base and h is the height of the wedge. In this case, the base is the elliptical cross-section and the height is the distance between the planes z = 0 and z = 3x.

The area of the elliptical cross-section at each value of x and y is given by A = pi * x * 3y. The height of the wedge at each value of x and y is given by h = 3x. So we can set up the integral as follows:

V = integral from -5/3 to 5/3 (integral from -sqrt((25-x^2)/9) to sqrt((25-x^2)/9) of (1/3) * pi * x * 3y * 3x dy) dx

Simplifying this integral, we get:

V = (pi/3) * integral from -5/3 to 5/3 (integral from -sqrt((25-x^2)/9) to sqrt((25-x^2)/9) of 9x^2y dy) dx

Integrating over y, we get:

V = (pi/3) * integral from -5/3 to 5/3 of 9x^2 * [(sqrt((25-x^2)/9))^2 - (-sqrt((25-x^2)/9))^2] dx

Simplifying this integral, we get:

V = (10*pi/9) * integral from -5/3 to 5/3 of x^2 * (25-x^2)^(1/2) dx

This integral can be solved using a u-substitution, where u = 25-x^2 and du/dx = -2x. We get:

V = (10*pi/27) * integral from 0 to 25 of u^(1/2) du

Simplifying this integral, we get:

V = (100*pi/81) * (u^(3/2)/3)| from 0 to 25

V = (100*pi/81) * (125/3)

V = 5000*pi/243

Therefore, the volume of the wedge cut from the elliptical cylinder x^2 + 9y^2 = 25 by the planes z = 0 and z = 3x that is above the xy-plane is 5000*pi/243 cubic units.

Learn more about volume here: brainly.com/question/1578538

#SPJ11

Answer:

40%

Step-by-step explanation:

We Know

The price of 1 kg of prawns increases from $28 to $35.

Find the percentage increase in price.​​

We Take

(35 ÷ 25) x 100 = 140%

Then We Take

140% - 100% = 40%

So, the percentage increase in the price is 40%.

Answer: 33 units²

Step-by-step explanation:

      We have four triangles that we will find the area for. Since we have two sets of equivalent triangles, we will use A = BH for both different sizes, but we won't divide by two (since we have two).

A = BH

A = (3)(9)

A = 27 units²

A = BH

A = (3)(2)

A = 6 units²

      Now, we will add these two sets of triangles together.

A = 27 units² + 6 units²

A = 33 units²

Taking the difference between the ages, we can see that  her grandmother is 56 years older than her.

To find how many years older his her grandmother, we just need to take the difference between both of their ages. (remember that a difference is just a subtraction)

Then we will take the age of the grandmother and we will subtract the age of Anita.

We will get the difference:

D = 68 - 12

D = 56

We can see that her grandmother is 56 years older than her.

Learn more about differences at:

https://brainly.com/question/17695139

#SPJ1

Answer:

It is 252

Step-by-step explanation:

Just multiply the base and the height ;-;

The density of the air inside the ball is approximately 11.69 kg/m³.

Density is a unit of measurement for mass per volume.

It is calculated by dividing an object's mass by its volume, and is typically denoted by the symbol "."

In the SI system, the unit of density is typically kilogrammes per cubic metre (kg/m3).

To solve this problem, we need to use the equation for the density of an object:   density = mass / volume

We can find the volume of the basketball by using the formula for the volume of a sphere:  volume = (4/3)πr³

Since the basketball has a diameter of 0.17 meters, its radius is 0.085 meters. When we use this value as a substitute in the volume formula, we get:

volume = (4/3)π(0.085)³ = 0.0002562834 m³

To find the mass of the air inside the ball, we subtract the mass of the deflated ball from the mass of the inflated ball:

mass of air = 0.618 kg - 0.615 kg = 0.003 kg

Now we can calculate the density of the air inside the ball:

density = mass of air / volume = 0.003 kg / 0.0002562834 m³ = 11.69 kg/m³.

To know more about volume visit:

https://brainly.com/question/14439212

#SPJ1

Answer:

One number is 6 and the other number is 4

Step-by-step explanation:

Helping in the name of Jesus.

The number of ways that endpoint P that is perpendicular to line n is One way.

In a plane, two lines are parallel if they lie in the same plane and never intersect, no matter how far they are extended. If a point is between two parallel lines, it lies on a line that is perpendicular to both of the parallel lines.

We can draw a line that passes through endpoint P and is perpendicular to line n. This line will intersect line m at a right angle. Since there is only one line that passes through a point and is perpendicular to another line, there is only one line that can be drawn from endpoint P that is perpendicular to line n.

Find out more on perpendicular at https://brainly.com/question/1202004

#SPJ1

1. Affordably presented by objects or environments, such as a ball providing the opportunity to practice grasping, throwing, and catching.
2. Individuals perceive these affordances and decide to engage with them, based on their current motor abilities and developmental stage.
3. Through interacting with affordances, individuals practice and develop their motor skills by attempting, refining, and mastering the actions associated with affordance.

Affordably is a term used to describe the relationship between an individual's perception of their environment and their ability to interact with it. In terms of motor development, affordances refer to the opportunities for movement that the environment presents. These opportunities can be both physical and social and can include objects to manipulate, spaces to explore, and people to interact with.

The concept of affordance is important for motor development because it provides children with opportunities to practice and refine their motor skills. As children explore their environment, they are able to perceive the various affordances that it presents, and they can use these affordances to develop their motor skills.

For example, a child may perceive that a box can be used as a stepping stool, and they may use this affordance to climb up onto a table. In doing so, they are developing their balance, coordination, and strength. Similarly, a child may perceive that a ball can be thrown, caught, and bounced, and they can use these affordances to develop their hand-eye coordination, spatial awareness, and timing.

Overall, affordance plays an important role in motor development by providing children with opportunities to explore and interact with their environment and to develop their motor skills in the process.
Affordance contributes to motor development by providing opportunities for individuals to interact with their environment, which in turn helps them develop and refine their motor skills. Affordance refers to the potential actions or uses that an object or environment provides to an individual. In the context of motor development, affordances can be seen as opportunities for practicing and enhancing motor abilities.


Learn more about Affordably:

brainly.com/question/28273462

#SPJ11

Answer:

y = 1

Step-by-step explanation:

the equation of a horizontal line is

y = c ( c is the value of the y- coordinates the line passes through )

the line passes through (- 5, 1 ) with y- coordinate 1 , then

y = 1 ← equation of horizontal line

Answer: C) y=1

Step-by-step explanation: It couldn't be B or D, seeing as they are both vertical lines. We are left with y=-5 and y=1. The only points that y=-5 pass through have a y-coordinate of -5, and the point in question has a y-coordinate of 1. Your answer is C! Hope this helped.

Answer:

The plane should enter the clouds in about 3.3 hours; the plane should exit the cloud in about 6.0 hours

Step-by-step explanation:

I also made a table using your data in Desmos Graphic Calculator and the quadratic regression equation it gave me was

[tex]y=-15.3604x^2+141.912x+0.56701[/tex]

If your Desmos looks like mine, your table should be in box 1 (y1), and something like

[tex]y_{1}[/tex] ~ [tex]ax^2_{1}+bx_{1}+c[/tex] and it says STATISTICS, RESIDUALS, PARAMETERS (all this should be in the y2 box and it should graph the parabola itself)

First, under this equation, type y = 300 in the fourth box (y4)

Second, click on the wrench on the right and for your x axis, use -2.585 < 12.415 and for your y axis

Third, hover your mouse over the first spot where you parabola and your y = 300 line intersect.  You should see that the intersection coordinate is (3.261, 300)

Because the parabola points up at this first intersection, we know the plane is travelling upward, so this first coordinate is when the plane enters the clouds.  And rounding 3.261 to the nearest tenth gives us 3.3 hours

Fourth, hover your mouse over the second spot where your parabola and your y = 300 line intersect.  You should see that the intersection coordinates are (5.978, 300)

Because the parabola points down at this second intersection point, we know that plane is travelling downward, so this second coordinate is when the plane exits the clouds.  And rounding to the nearest tenth gives us 6.0 hours

If you can't figure out how to made the quadratic regression equation, I attached a picture of the Desmos graph I used for your question.

Answer:

y= -5(x+6)^2 +4

Step-by-step explanation:

Ans: B (=20)

p/s: sorry i use my calculator :')))) bc it's too long. you can do it by substituting the x values of each one according to the answer into the given equation.If there are any mistakes, please forgive me :'))))

Ok done. Thank to me >:333

The zoo keeper is 5.5 feet tall.

When the corresponding properties of two or more triangles are compared, and there is a common relations among them, then the triangles are said to be similar. Thus their corresponding sides may be compared in form of ratio.

In the question, the giraffe casts a shadow as given. Then by comparison, the height of the zoo keeper (h) can be determined as follows:

4/ 12 = h/ 16.5

12h = 4*16.5

      = 66

h = 66/ 12

  = 5.5

The zoo keeper is 5.5 feet tall.

Learn more about similar triangles at https://brainly.com/question/28386529

#SPJ1

The value of n when t = 4 can be found using the given data points and an appropriate mathematical model. Since the problem does not specify the nature of the relationship between n and t, we will assume a linear relationship and use the slope-intercept form of a straight-line equation to find the value of n when t = 4.

First, we need to find the slope of the line. Using the two data points provided, we can calculate:

slope = (change in n) / (change in t) = (400 - 150) / (1 - 0) = 250

Next, we can use the point-slope form of a line equation to find the equation of the line:

n - 150 = 250(t - 0)
n = 250t + 150

Finally, we can substitute t = 4 into the equation to find the value of n:

n = 250(4) + 150 = 1150

Therefore, the value of n when t = 4 is 1150.

In summary, to find the value of n when t = 4, we assumed a linear relationship between n and t and used the two given data points to calculate the slope of the line. We then used the point-slope form of a line equation to find the equation of the line, and substituted t = 4 into the equation to find the value of n.

To learn more about slope-intercept, visit:

https://brainly.com/question/11990185

#SPJ11

There is not sufficient evidence to conclude that infestation by spider mites induces resistance to wilt disease caused by the Verticillium fungus in cotton plants at the 1% level.

The question being investigated is whether infestation by spider mites can induce resistance to wilt disease caused by the fungus Verticillium in cotton plants. The experiment involved two groups of cotton plants - one group was infested with spider mites, while the other group served as controls. After two weeks, the mites were removed and both groups were inoculated with the Verticillium fungus. The number of plants that developed symptoms of wilt disease was recorded for each group.

To test whether infestation by spider mites can induce resistance to wilt disease, we can use a hypothesis test. The null hypothesis (H0) is that there is no difference in the proportion of plants that develop wilt disease between the mites and no mites groups, while the alternative hypothesis (Ha) is that the mites group has a lower proportion of plants with wilt disease compared to the no mites group.

We can use a chi-square test for independence to determine whether the data provide sufficient evidence to reject the null hypothesis at the 1% level. The test statistic is calculated as follows:

chi-square = (ad - bc)^2 / [(a+b)(c+d)]

where a = number of plants in the mites group with wilt disease, b = number of plants in the mites group without wilt disease, c = number of plants in the no mites group with wilt disease, and d = number of plants in the no mites group without wilt disease.

Using the data from the table, we can calculate the test statistic as follows:

chi-square = (14*28 - 18*26)^2 / [(14+18)(28+26)] = 1.079

The degrees of freedom for the chi-square test is (2-1)*(2-1) = 1. The critical value of chi-square at the 1% level with 1 degree of freedom is 6.635.

Since the calculated chi-square value (1.079) is less than the critical value (6.635), we fail to reject the null hypothesis.

Learn more about test statistics here: brainly.com/question/14128303

#SPJ11

The statement is true. If B is obtained from A by row operations, the rows of B are linear combinations of the rows of A and vice-versa. (D)

When two matrices A and B are row equivalent, it means they can be obtained from each other through a series of elementary row operations. These row operations include row swapping, row multiplication by a nonzero scalar, and adding/subtracting multiples of one row to another row.

Since row operations preserve the row space of a matrix, the row spaces of A and B remain the same throughout these operations. In other words, the rows of B are linear combinations of the rows of A and vice-versa.

Thus, if A and B are row equivalent, their row spaces are the same, as the span of the rows in both matrices is identical. This supports the statement's truth that if A and B are row equivalent, their row spaces are the same.(D)

To know more about row operations click on below link:

https://brainly.com/question/27992729#

#SPJ11

Answer: 8 to 40

6:30

2/10

Step-by-step explanation:To check if this is the answer you can multiply the first number of each of these ratios by 5. (We multiply them by five because it is the second number in the ratio 1:5)

8 times 5 equals 40 -so this one is right

6 times 5 equals 30 -yep this one is right too

2 times 5 equals 10 -yeperdoodle

Yeah..so these are the answers! let me know if this helps you out.

The numerical expressions are:

(2 + 4) x 7 = 42

(12 ÷ 3) x 5 = 20

A mathematical expression is made up of integers and mathematical operators including addition, multiplication, subtraction, and division.

A number can be expressed in numerous ways, including word form and numerical form.

A numerical expression is a mathematical statement that only contains numbers and one or more operation symbols. Addition, subtraction, multiplication, and division are examples of operation symbols. It can alternatively be expressed using the radical symbol (square root symbol) or the absolute value symbol.

The numerical expressions are:

(2 + 4) x 7 = 42

(12 ÷ 3) x 5 = 20

Learn more about numerical expression here:

https://brainly.com/question/29778337

#SPJ1

(a) The set {(x1,x2)T|x1 + x2 = 0} is a subspace of R2.

To check whether the given set is a subspace of R2, we need to check whether it is closed under vector addition and scalar multiplication. Let u = (u1,u2)T and v = (v1,v2)T be two arbitrary vectors in the set, and let c be an arbitrary scalar. Then:

u + v = (u1 + v1, u2 + v2)

Since u1 + v1 + u2 + v2 = (u1 + u2) + (v1 + v2) = 0 + 0 = 0 (since u and v are in the set), we see that u + v is also in the set.

c*u = (c*u1, c*u2)

Since c*u1 + c*u2 = c*(u1 + u2) = c*0 = 0 (since u is in the set), we see that c*u is also in the set.

Therefore, the set {(x1,x2)T|x1 + x2 = 0} is a subspace of R2.

(b) It is not a subspace of R2

To check whether the given set is a subspace of R2, we need to check whether it is closed under vector addition and scalar multiplication.

Let u = (u1,u2)T and v = (v1,v2)T be two arbitrary vectors in the set, and let c be an arbitrary scalar. Then:

u + v = (u1 + v1, u2 + v2)

Since u21 = u22 and v21 = v22 (since u and v are in the set), we see that (u1 + v1)2 = (u2 + v2)2. Therefore, u + v is in the set.

c*u = (c*u1, c*u2)

Since u21 = u22 (since u is in the set), we see that (c*u1)2 = (c*u2)2. Therefore, c*u is in the set.

However, the set {(x1,x2)T|x21 = x22} is not a subspace of R2 because it does not contain the zero vector (0,0)T, which is required for any set to be a subspace.

To know more about set subspace refer here:

https://brainly.com/question/14983844?#

#SPJ11

a) The null space of A is a subspace of the 7-dimensional vector space R^7, and its dimension is 3.

b) The column space of A is a subspace of the 5-dimensional vector space R^5.

The null space of a matrix is the subspace of the vector space in which the matrix operates. In this case, since A is a 5x7 matrix, its null space is a subspace of the 7-dimensional vector space R^7.

a) The dimension of the null space can be found using the rank-nullity theorem, which states that the dimension of the null space plus the rank of the matrix equals the number of columns. Since the rank of A is 4 and it has 7 columns, we have:

dim(null space) + rank(A) = number of columns

dim(null space) + 4 = 7

dim(null space) = 3

Therefore, the null space of A is a subspace of R^7 with dimension 3.

b) The column space of a matrix is the subspace of the vector space generated by the columns of the matrix. In this case, since A is a 5x7 matrix, its column space is a subspace of the 5-dimensional vector space R^5. This is because the columns of A are vectors in R^5. Therefore, the column space of A is a subspace of R^5.

Learn more about column space here

brainly.com/question/29894379

#SPJ4

To find T, N, and k for the space curve r(t) = -7ti - (7a cosh(t/a))j with a > 0.6, follow these steps:

1. Calculate the first derivative, r'(t), to find the tangent vector T:
r'(t) = -7i - (7/a sinh(t/a))j
To find the unit tangent vector T, normalize r'(t):
T = r'(t) / ||r'(t)||

2. Calculate the second derivative, r''(t), to find the normal vector N:
r''(t) = - (7/a² cosh(t/a))j
To find the unit normal vector N, normalize r''(t):
N = r''(t) / ||r''(t)||

3. Calculate the curvature k:
k = ||r'(t) x r''(t)|| / ||r'(t)||³

In summary, find the first and second derivatives of r(t), normalize them to get T and N, and compute the curvature k using the given formula.

To know more about first derivative click on below link:

https://brainly.com/question/29005833#

#SPJ11

If N = 25 and K = 5, the degrees of freedom (df) you would use is C. 5,20.

This is because the formula for degrees of freedom in this case is (K-1)(N-1), which gives us (5-1)(25-1) = 4x24 = 96, and we divide by the total sample size (N) to get 96/25 = 3.84.

Since we cannot use a decimal for degrees of freedom, we round down to the nearest whole number, which gives us 3.

Therefore, the degrees of freedom for this scenario is 5-1 = 4 for the numerator and 25-1 = 24 for the denominator, which gives us a final answer of C. 5,20.

Learn more about degrees of freedom.

brainly.com/question/31178740

#SPJ11

The margin of error at a 90% confidence level is approximately 0.053.

To find the margin of error at a 90% confidence level, we first need to calculate the standard error, which is the standard deviation of the sampling distribution of the proportion:

SE = [tex]\sqrt{[p(1-p)/n]}[/tex]
where p is the estimated proportion (p-hat) and n is the sample size.

Plugging in the values, we get:

SE = sqrt[0.24(1-0.24)/340] ≈ 0.032

Next, we use the formula for margin of error at a 90% confidence level:

ME = z*SE
where z is the z-score corresponding to the desired confidence level.

Since we are looking for a 90% confidence level, we use z = 1.645:

ME = 1.645*0.032 ≈ 0.053

Therefore, the margin of error at a 90% confidence level is approximately 0.053. This means that if we were to repeat the sampling process many times, 90% of the intervals we construct would contain the true proportion of the population within 0.053 of our estimated proportion.

To know more about margin of error refer here:

https://brainly.com/question/29101642

#SPJ11

Answer:

x= 200

Step-by-step explanation:

(200)2 - 1 = 399

Answer:

Step-by-step explanation: well what we can do so far is this: x2-1=399

                                                                                                        x2+1=399+1

So now that we have x2 by itself, the equation will look something like this

x2=400

because its x2 AND NOT x1, we will have to take the SQUARE ROOT.

x=±√400

x= either positive 20 or -20!

To create an algorithm that decides whether there is a string w ∈ Σ* such that w is in neither L1 nor L2, using the closure properties of regular languages, Compute the complements of the regular languages L1 and L2, denoted as L1' and L2', using property C (closed under complement).

To decide whether there exists a string w in neither L1 nor L2, we can use the following algorithm:
1. Take the complement of L1 and L2, denoted as L1' and L2' respectively, using property C.
2. Take the intersection of L1' and L2', denoted as L3, using property B.
3. Take the reverse of L3, denoted as L4, using property D.
4. Concatenate L1 and L2, denoted as L5, using property E.
5. Take the complement of L5, denoted as L5', using property C.
6. Take the intersection of L4 and L5', denoted as L6, using property B.
7. If L6 is empty, output "NO". Otherwise, output "YES" and provide any string w in L6.
Explanation:
Step 1 ensures that L1' and L2' contain all strings that are not in L1 and L2 respectively.
Step 2 finds the strings that are not in either L1 or L2, i.e., the intersection of L1' and L2'.
Step 3 reverses the strings in L3, since the question asks for a string w and not a language.
Step 4 concatenates L1 and L2 to ensure that we consider all possible strings, not just those that are in L1 or L2 separately.
Step 5 takes the complement of L5 to find the strings that are not in L5, which are the strings that are not in either L1 or L2.
Step 6 finds the intersection of the reversed strings in L4 and the strings not in L5, which are the strings that are not in L1 or L2. If L6 is empty, it means there is no such string w, and we output "NO". Otherwise, we output "YES" and provide any string w in L6.
To create an algorithm that decides whether there is a string w ∈ Σ* such that w is in neither L1 nor L2, using the closure properties of regular languages, follow these steps:
1. Compute the complements of the regular languages L1 and L2, denoted as L1' and L2', using property C (closed under complement).
2. Compute the intersection of the complements L1' and L2', denoted as L3 = L1' ∩ L2', using property B (closed under intersection).
3. Check if L3 is empty or not. If L3 is not empty, it means there exists a string w ∈ Σ* that is in neither L1 nor L2.
This algorithm leverages the closure properties of regular languages to find a string that is not present in both L1 and L2.

To learn more about properties, click here:

brainly.com/question/29528698

#SPJ11

the Wronskian W(y1, y2) is not identically zero, we can conclude that the functions y1(x) = e^x and y2(x) = e^(2x) are linearly independent.

To show that y=e^x and y=e^(2x) are linearly independent, we'll use the Wronskian test. The Wronskian is a determinant that helps determine the linear independence of two functions. For our functions y1(x) = [tex]e^x[/tex] and y2(x) = [tex]e^{2x),[/tex]the Wronskian is given by:

W(y1, y2) = [tex]\left[\begin{array}{ccc}y_1&y_2\\y'_1&y'_2\\\end{array}\right][/tex]
Now, we'll compute the derivatives and populate the matrix:

[tex]y_1'(x) = e^x\\y_2'(x) = 2e^{2x}[/tex]

W(y1, y2) =[tex]e^x2e^{2x}-e^xe^{2x}[/tex]

Next, we'll compute the determinant of this matrix:

[tex]W(y1, y2) = (e^x * 2e^{2x)}) - (e^x * e^{2x}))\\W(y1, y2) = e^{3x)} (2 - 1)\\W(y1, y2) = e^{3x}\\\\[/tex]
Since the Wronskian W(y1, y2) is not identically zero, we can conclude that the functions [tex]y1(x) = e^x[/tex]and [tex]y2(x) = e^{2x}[/tex] are linearly independent.

learn more about the Wronskian test.

https://brainly.com/question/14309076

#SPJ11

The statement "if B is a 3x3 matrix, and det(B) = -4, then det([tex]2BB^tB^{-1[/tex]) = -8" is false.

If B is a 3x3 matrix, and det(B) = -4, then det([tex]2BB^tB^{-1[/tex]) = -8. Here are the terms I will include in my answer: matrix, determinant, transpose, and inverse.

1. Determine det(B)
Given: det(B) = -4

2. Compute det(2B)
The determinant of a scalar multiple of a matrix is the scalar raised to the power of the matrix's dimension multiplied by the determinant of the matrix. Since the matrix is 3x3, we have:
det(2B) = ([tex]2^3[/tex]) * det(B) = 8 * (-4) = -32

3. Compute det([tex]B^t[/tex])
The determinant of a matrix and its transpose are equal, so:
det([tex]B^t[/tex]) = det(B) = -4

4. Compute det([tex]B^{-1[/tex])
For an invertible matrix, the determinant of its inverse is the reciprocal of the determinant:
det([tex]B^{-1[/tex]) = 1/det(B) = 1/(-4) = -1/4

5. Calculate det([tex]2BB^tB^{-1[/tex])
Using the property of determinants that det(AB) = det(A) * det(B), we have:
det([tex]2BB^tB^{-1[/tex]) = det(2B) * det([tex]B^t[/tex]) * det([tex]B^{-1[/tex]) = -32 * (-4) * (-1/4) = -32

To know more about "Matrix" refer here:

https://brainly.com/question/30389548#

#SPJ11

In mathematics, these extreme probabilities are expressed as 0 (impossible) and 1 (certain). This means a probability number is always a number from 0 to 1.

Probability can also be written as a percentage, which is a number from 0 to 100 percent.