Suppose that $2000 is loaned at a rate of 13.5%, compounded quarterly. Assuming that no payments are made, find the amount owned after 9 years. Do not round any intermediate computations, and round your answer to the nearest cent.

The correct answer is C. The sampling distribution of the proportion approximately follows the normal distribution when sampling with replacement or without replacement from extremely large populations when nx and n(1-x) are each at least 5.

The sampling distribution of the proportion is the distribution of proportions obtained from multiple random samples taken from a population. The central limit theorem states that for large sample sizes, the sampling distribution of the proportion will be approximately normally distributed, regardless of whether sampling is done with replacement or without replacement.

In option A, it is mentioned that nx and n(1-x) should be at least 10. This is a more conservative threshold and may not always be necessary for approximation to a normal distribution. Option C, on the other hand, states that nx and n(1-x) should be at least 5. This is a commonly used threshold in statistics and is generally considered sufficient for approximation to a normal distribution for large populations.

Therefore, option C is the correct answer as it includes both sampling with replacement or without replacement and allows for nx and n(1-x) to be at least 5 for approximation to a normal distribution in most cases.

To learn more about sampling distribution here:

brainly.com/question/29375938#

#SPJ11

In the long run:

(a) The proportion of customers that enter the system is π1 + π12 = 9/23.

(b) The proportion of customers that visit server 2 is π2 + π12 = 7/23.

The state space of the system is S = {10, 1, 2, 12}, where:

State 10 represents that both servers are free.

State 1 represents that server 1 is busy, but server 2 is free.

State 2 represents that server 2 is busy, but server 1 is free.

State 12 represents that both servers are busy.

The transition rates between the states are as follows:

From state 10, transitions to state 1 and state 2 can occur with rates 2 and 0, respectively.

From state 1, transitions to state 10 and state 12 can occur with rates 4 and 2, respectively.

From state 2, transitions to state 10 and state 12 can occur with rates 2 and 2, respectively.

From state 12, transitions to state 1 and state 2 can occur with rates 0 and 2, respectively.

To find the steady-state probabilities, we can set up the balance equations:

λπ10 = 4π1 + 2π12

2π10 = 2π2 + λπ10

4π1 = 2π12 + μπ10

2π2 = 2π12 + λπ10

where λ = 2 is the arrival rate, and μ = 4 and ν = 2 are the service rates of servers 1 and 2, respectively.

Solving the system of equations, we get:

π10 = (4λ(ν + λ))/(4λ(ν + λ) + μ(ν + λ) + μλ) = 8/23

π1 = (2μλ)/(4λ(ν + λ) + μ(ν + λ) + μλ) = 8/23

π2 = (2λ(ν + λ))/(4λ(ν + λ) + μ(ν + λ) + μλ) = 6/23

π12 = (μ(ν + λ))/(4λ(ν + λ) + μ(ν + λ) + μλ) = 1/23

Therefore, in the long run:

(a) The proportion of customers that enter the system is π1 + π12 = 9/23.

(b) The proportion of customers that visit server 2 is π2 + π12 = 7/23.'

Learn more about server.

brainly.com/question/7007432

#SPJ11

The measure of the unknown angles in the cyclic quadrilateral are as follow, a = 57°, b = 24° , c = 39°, and d = 60°.

Angles formed in the cyclic quadrilateral are as follow,

By applying the theorem of angles formed in the same arc of a circle are congruent.

We have,

Measure of angles a° and angle 57°  are formed in the same arc XY of the circle.

This implies,

Measure of angle a° = 57°

Measure of angles  b° and angle 24° are formed in the same arc  ZY of the circle.

This implies,

Measure of angle b° = 24°

Measure of angles c° and angle 39° are formed in the same arc WX of the circle.

This implies,

Measure of angle c° = 39°

Measure of angles d° and angle 60° are formed in the same arc WZ of the circle.

This implies,

Measure of angle d° = 60°

Therefore, for the circle the measures of required angles in the cyclic quadrilateral are as follow  a = 57°, b = 24° , c = 39°, and d = 60°.

Learn more about quadrilateral here

brainly.com/question/29324951

#SPJ1

Answer:

270

Step-by-step explanation:

The value of the given integral after reversing the order of integration is:

∫[-∞,+∞]cos([tex]4x^2[/tex])dx

We need to reverse the order of integration of the given integral:

∫∫cos([tex]4x^2[/tex])dxdy

The limits of integration for x are not given, so we assume that the limits are from -∞ to +∞. For y, we assume the limits are from 0 to 1.

To reverse the order of integration, we write the integral as:

∫∫cos([tex]4x^2[/tex])dydx

Now, we integrate with respect to y first, keeping x as a constant:

∫∫cos([tex]4x^2[/tex])dydx = ∫[0,1]∫[-∞,+∞]cos([tex]4x^2[/tex])dydx

Integrating with respect to y, we get:

∫[0,1]∫[-∞,+∞]cos([tex]4x^2[/tex])dydx = ∫[-∞,+∞]cos([tex]4x^2[/tex])∫[0,1]dydx

The integral of y from 0 to 1 is simply (1-0) = 1. So we get:

∫[-∞,+∞]cos([tex]4x^2[/tex])∫[0,1]dydx = ∫[-∞,+∞]cos([tex]4x^2[/tex])dx

This integral cannot be evaluated analytically, so it remains in this form.

Therefore, the value of the given integral after reversing the order of integration is:

∫[-∞,+∞]cos([tex]4x^2[/tex])dx

Learn more about integral

brainly.com/question/18125359

#SPJ11

Answer:

Step-by-step explanation:

(a)

Let λ be an eigenvalue of A, and let x be the corresponding eigenvector. Then we have Ax = λx. Consider the matrix B = A - λI, where I is the identity matrix. We want to show that B has rank at least m-1.

Since A is tridiagonal, it follows that B is also tridiagonal. Moreover, since A is Hermitian, it follows that B is also Hermitian. Thus, B has the following form:

B = [b1 c1 ]

[a2 b2 c2 ]

[ a3 b3 c3 ]

[ . . ]

[ . cm-1 bm-1 cm]

where bi = ai - λ, for i = 1, 2, ..., m.

Now, let y be the vector obtained by setting the first entry of x to zero, i.e., y = [0 x2 x3 ... xm]T. Then we have By = Ax - λx = 0, since x is an eigenvector of A. It follows that y is in the nullspace of B.

Let z be a vector obtained by setting the second entry of x to zero, i.e., z = [x1 0 x3 ... xm]T. Then we have Bz = [b1 a2 0 ... 0]T, which is nonzero since bi is nonzero for all i. It follows that z is not in the nullspace of B.

Thus, we have found two linearly independent vectors in the nullspace and orthogonal complement of B, respectively, which implies that B has rank at most m-2. Since B is a square matrix of size m, it follows that B has rank at least m-1. Therefore, A - λI has rank at least m-1, which implies that λ is a simple eigenvalue of A.

(b)

Consider the matrix

A = [1 1 0]

[1 1 1]

[0 1 1]

which is upper-Hessenberg with all subdiagonal entries nonzero. The characteristic polynomial of A is given by

p(λ) = det(A - λI) = (1 - λ)(1 - λ)(1 - λ) - 1 = (λ - 2)λ(λ - 2).

Thus, the eigenvalues of A are λ = 0, 2, 2. Since two of the eigenvalues are repeated, it follows that the eigenvalues of A are not necessarily distinct, in contrast to the tridiagonal Hermitian case.

So  the values of c are:

a) P(X < 1,Y < 2) = 0.0244

b) P(1 < X < 2) = 0.102c

c) P(Y > 3) = 0.0014c

d)  P(X < 2, Y < 2) = 0.073c

e) E(X) = c/12

f) E(Y) = c/18

g) f(x) =∫[0,x] [tex]ce^{(-2x-3y)}[/tex]

= c/3 (1 -[tex]e^{(-3x)}[/tex])

h) f(X=1) = c

i) E(Y|X=1) = 1/2

j)[tex]f(x|y=2) = c/2 * e^{(-4-2y)} * (e^{(4)}-1) / [c/4 * (e^5))[/tex]

a) To find P(X < 1, Y < 2), we need to integrate the joint probability density function over the region where 0 < x < 1 and 0 < y < 2.

∫∫f(x,y) dA = ∫[0,1]∫[0,y] [tex]ce^{(-2x-3y)}[/tex]dxdy

= ∫[0,2]∫[x/2,1] [tex]ce^{(-2x-3y)}[/tex] dydx (since 0 < x < 1 and 0 < y < x)

= [tex]c/6 [1 - e^{(-4)} - 2e^{(-3)} + e^{(-7)}][/tex] ≈ 0.0244

b) To find P(1 < X < 2), we need to integrate the joint probability density function over the region where 1 < x < 2 and 0 < y < x.

∫∫f(x,y) dA = ∫[1,2]∫[0,x] [tex]ce^{(-2x-3y)}[/tex] dydx

= [tex]c/3 [e^{(-2)} - e^{(-5)}][/tex] ≈ 0.102c

c) To find P(Y > 3), we need to integrate the joint probability density function over the region where 0 < x < ∞ and 3 < y < x.

∫∫f(x,y) dA = ∫[3,∞]∫[y,x] [tex]ce^{(-2x-3y)}[/tex] dxdy

= c/6 [tex]e^{(-9)}[/tex] ≈ 0.0014c

d) To find P(X < 2, Y < 2), we need to integrate the joint probability density function over the region where 0 < x < 2 and 0 < y < 2.

∫∫f(x,y) dA = ∫[0,2]∫[0,y] [tex]ce^{(-2x-3y)}[/tex] dxdy

= [tex]c/6 [1 - e^{(-4)} - 3e^{(-6)}][/tex] ≈ 0.073c

e) To find E(X), we need to integrate the product of X and the joint probability density function over the range of X and Y.

E(X) = ∫∫xf(x,y) dA = ∫[0,∞]∫[0,x] cx [tex]e^{(-2x-3y)}[/tex]dydx

= c/12

f) To find E(Y), we need to integrate the product of Y and the joint probability density function over the range of X and Y.

E(Y) = ∫∫yf(x,y) dA = ∫[0,∞]∫[0,x] cy [tex]e^{(-2x-3y)}[/tex] dydx

= c/18

g) To find the marginal probability distribution of X, we need to integrate the joint probability density function over all possible values of Y.

f(x) = ∫f(x,y) dy = ∫[0,x]  dy[tex]ce^{(-2x-3y)}[/tex]

= c/3 (1 -[tex]e^{(-3x)}[/tex])

h) To find the conditional probability distribution of Y given that X = 1, we need to use the conditional probability formula:

f(Y|X=1) = f(X,Y) / f(X=1)

where f(X=1) is the marginal probability distribution of X evaluated at X=1.

f(X=1) = c

i) To find E(Y|X=1), we need to first find the conditional density function f(y|x=1). Using Bayes' theorem, we have:

f(y|x=1) = f(x=1,y) / f(x=1)

To find f(x=1,y), we can integrate f(x,y) over the range of y such that 0<y<1:

f(x=1,y) = ∫[y=0 to y=1] f(x=1,y)dy

= ∫[y=0 to y=1] [tex]ce^{(-2(1)-3y)}[/tex]dy

= [tex]ce^{(-5)}/3 * (1-e^{(-3)})[/tex]

To find f(x=1), we can integrate f(x,y) over the range of y such that 0<y<1 and x such that x=y to x=1:

f(x=1) = ∫[y=0 to y=1] ∫[x=y to x=1] [tex]ce^{(-2x-3y)}[/tex]dxdy

= ∫[y=0 to y=1] [tex]ce^{(-5y)/2}[/tex] dy

= [tex]c*(1-e^{(-5)})/10[/tex]

Thus, we have:

[tex]f(y|x=1) = ce^{(-5)/3} * (1-e^{(-3)}) / [c(1-e^{(-5)})/10][/tex]

[tex]= 2/3 * e^{(2y/3)} * (1-e^{(-3)}) / (1-e^{(-5)})[/tex]

Using this conditional density function, we can find E(Y|X=1) as follows:

E(Y|X=1) = ∫[y=0 to y=1] y*f(y|x=1)dy

= ∫[y=0 to y=1] y * 2/3 * [tex]e^{(2y/3)} * (1-e^{(-3)}) / (1-e^[(-5)}) dy[/tex]

= 1/2

Therefore, E(Y|X=1) = 1/2.

j) To find the conditional probability distribution of X given Y=2, we need to find f(x|y=2). Using Bayes' theorem, we have:

f(x|y=2) = f(x,y=2) / f(y=2)

To find f(x,y=2), we can integrate f(x,y) over the range of x such that y<x<2:

f(x,y=2) = ∫[x=y to x=2] f(x,y=2)dx

= ∫[x=y to x=2] [tex]c*e^{(-2x-6)}[/tex]dx

= c/2 * [tex]e^{(-4-2y) }* (e^{(4)}-1)[/tex]

To find f(y=2), we can integrate f(x,y) over the range of x such that y<x<2 and y such that 0<y<2:

f(y=2) = ∫[y=0 to y=2] ∫[x=y to x=2] [tex]c*e^{(-2x-3y)}[/tex]dxdy

= ∫[y=0 to y=2] c/2 *[tex]e^{(-3y)} * (e^{(4)}-e^{(-4)}) dy[/tex]

[tex]= c/4 * (e^5-e^{(-5)})[/tex]

Thus, we have:

[tex]f(x|y=2) = c/2 * e^{(-4-2y)} * (e^{(4)}-1) / [c/4 * (e^5))[/tex]

Learn more about probability density function

brainly.com/question/29062095

#SPJ11

It is all proved that,

(a) R(T+U) SR(T) +R(U).

(b) If W is finite-dimensional, then rank(T+U) < rank(T)+ rank(U).

(c) rank(A + B) < rank(A) + rank(B) for any m X n matrices A and B.

(a) To prove that R(T+U)⊆R(T)+R(U), let y be any vector in R(T+U). Then, there exists a vector x such that (T+U)x = y. We can rewrite this as Tx + Ux = y. Since Tx is in R(T) and Ux is in R(U), we have y = Tx + Ux ∈ R(T) + R(U). Therefore, we have shown that R(T+U)⊆R(T)+R(U).

To prove that R(T)+R(U)⊆R(T+U), let y be any vector in R(T)+R(U). Then, there exist vectors x and z such that Tx = y and Uz = y. We can rewrite this as (T+U)x - Ux + Uz = y. Since (T+U)x is in R(T+U) and Ux-Uz is in R(U), we have y = (T+U)x + (Ux-Uz) ∈ R(T+U). Therefore, we have shown that R(T)+R(U)⊆R(T+U).

Hence, we have proved that R(T+U) = R(T) + R(U).

(b) Let A be the matrix representation of T with respect to some basis of W, and let B be the matrix representation of U with respect to the same basis. Then, the matrix representation of T+U is A+B. By the rank-nullity theorem, we have rank(T) = dim(R(T)) = dim(W) - nullity(T), where nullity(T) is the dimension of the null space of T. Similarly, we have rank(U) = dim(W) - nullity(U).

Now, since W is finite-dimensional, the nullity of T+U is at least the nullity of T and the nullity of U, i.e., nullity(T+U) ≥ nullity(T) and nullity(T+U) ≥ nullity(U). Therefore, we have:

rank(T+U) = dim(W) - nullity(T+U)

≤ dim(W) - min(nullity(T), nullity(U))

= rank(T) + rank(U) - dim(W)

< rank(T) + rank(U)

Therefore, we have shown that rank(T+U) < rank(T) + rank(U) if W is finite-dimensional.

(c) Let A and B be m x n matrices. We can view A and B as linear transformations from [tex]R^n[/tex] to [tex]R^m[/tex]. Let T and U be the linear transformations represented by A and B, respectively. Then, we have:

rank(A+B) = rank(T+U) < rank(T) + rank(U)

= dim(R(T)) + dim(R(U))

= rank(A) + rank(B)

Therefore, we have shown that rank(A+B) < rank(A) + rank(B) for any m x n matrices A and B.

To know more about matrices, refer to the link below:

https://brainly.com/question/31424542#

#SPJ11

Answer:

0.0075

Step-by-step explanation:

Here we have to find  3/4 of 1 Meter

In such questions, we have to take the product of the two numbers.

    For example, if we have to find 1/4 of 20

   Then, 1/4 of 20 = 1/2 x 20

                              = 5

In this question, in order to find the  3/4th part of 1 meter we will have to take the product of 3/4 and 1

   so,  3/4 of 1 Meter = 3/4 x 1

                                 =3/4

So,  3/4 of 1 meter will be 3/4 meter.

Any fraction that is equivalent to 17/25 will also represent the same proportion of employees who attended the meeting.

An part of a whole is a fraction. The number is shown in mathematically as a quotient, where the numerator and denominator are split. Both are integers numbers . A fraction appears in the numerator or denominator of a complex fraction. The numerator of a proper fraction is less than the denominator.

A mathematical comparison of two numbers is known  as a proportion. According to proportion, two sets of provided numbers are said to be directly proportional to one another if they increase or decrease in the same ratio. "::" or "=" are symbols used to indicate proportions.

To  determine the Fraction of employee who attended the meeting:

Fraction of employee to attend meeting  is equal to the Amount of employees present at the meeting divided by the total number of employees

= [tex]\frac{153}{225}[/tex]

This fraction can be reduced to its simplest form by reducing both its numerator and denominator

In this,  largest common factor = 9;than we get:

[tex]\frac{153}{225}[/tex] = (153 ÷ 9) / (225 ÷ 9) = 17 / 25

Any fraction that is 17/25 will likely  indicate the same fraction  of workers that were present at the meeting.

For example ,68/100,34/50,51/75,204/300

As the numerator and denominator of each of these fractions may be split  4 or 5, they can all be reduced to the fraction 17/25.

Learn more about Equivalent here:

https://brainly.com/question/2972832

#SPJ1

To find the common ratio and the first four terms of the geometric sequence {(9^n+2)/(3)}, let's first rewrite the given expression to make it easier to understand i.e. Term a_n = (9^n+2)/3

Now, let's find the first four terms:
a_1 = (9^(1)+2)/3 = (9+2)/3 = 11/3
a_2 = (9^(2)+2)/3 = (81+2)/3 = 83/3
a_3 = (9^(3)+2)/3 = (729+2)/3 = 731/3
a_4 = (9^(4)+2)/3 = (6561+2)/3 = 6563/3

The first four terms are:
a_1 = 11/3
a_2 = 83/3
a_3 = 731/3
a_4 = 6563/3

To find the common ratio, divide the second term by the first term (or any consecutive terms):
Common ratio = a_2 / a_1 = (83/3) / (11/3) = 83/11 = 3

So, the common ratio is indeed 3, and the first four terms are 11/3, 83/3, 731/3, and 6563/3.

To learn more about the “common ratio” refer to the https://brainly.com/question/1509142

#SPJ11

lim n -> infinity an = 1.

To find the smallest value of M such that |an - 1| < t for all n > M, we can start by manipulating the inequality:

|an - 1| = |(n+1)/(n+2) - 1| = |n - 1| / |n + 2|

Since we want this expression to be less than t, we can write:

|n - 1| / |n + 2| < t

Multiplying both sides by |n + 2|, we get:

|n - 1| < t|n + 2|

We can split this inequality into two cases: n > 2 and n <= 2. For n > 2, we can drop the absolute values to get:

n - 1 < t(n + 2)

Expanding the right-hand side, we get:

n - 1 < tn + 2t

Solving for n, we get:

n > (1 - 2t) / (1 - t)

For n <= 2, we can drop the absolute values and reverse the inequality to get:

1 - n < t(n + 2)

Expanding the right-hand side, we get:

1 - n < tn + 2t

Solving for n, we get:

n > (1 - 2t) / (1 + t)

Therefore, the smallest value of M is the maximum of the values obtained from these two cases:

M = ceil(max((1 - 2t) / (1 - t), (1 - 2t) / (1 + t)))

Now, let's use the limit definition to prove that lim n -> infinity an = 1. We need to show that for any t > 0, there exists an integer N such that |an - 1| < t for all n > N.

Using the expression for an, we can write:

|an - 1| = |(n+1)/(n+2) - 1| = 1/(n+2)

Therefore, we need to find an integer N such that 1/(n+2) < t for all n > N. Solving for n, we get:

n > 1/t - 2

Therefore, we can choose N = ceil(1/t - 2) + 1. Then for any n > N, we have:

n > 1/t - 2

n + 2 > 1/t

1/(n+2) < t

Therefore, lim n -> infinity an = 1.

Learn more about  smallest value

brainly.com/question/29122137

#SPJ11

The final speed of the sled in the second run will be more than 9.00 m/s and the speed of the sled at the bottom of the hill after the second run is 9.00 m/s.

Explanation;-

A) When the sled slides down the ice-covered hill without friction, the only force acting on it is gravity. The initial speed of the sled in the first run is 0 m/s, and its final speed is 7.50 m/s. In the second run, the sled starts with a speed of 1.50 m/s. Since there is no friction and the same force (gravity) is acting on the sled, the change in speed should be the same in both runs. Therefore, the final speed of the sled in the second run will be more than 9.00 m/s.

B) To find the speed of the sled at the bottom of the hill after the second run, we can determine the change in speed from the first run and add it to the initial speed of the second run. The change in speed in the first run is 7.50 m/s - 0 m/s = 7.50 m/s. Now, we add this change in speed to the initial speed of the second run: 1.50 m/s + 7.50 m/s = 9.00 m/s. So, the speed of the sled at the bottom of the hill after the second run is 9.00 m/s.

Know more about friction and speed click here:

https://brainly.com/question/12307207

#SPJ11

The value of Rext is 20,000 Ω (ohms). This can be answered by the concept of resistor-capacitor.

To calculate the value of Rext (external resistance), we can use the time constant formula for an RC (resistor-capacitor) circuit:

τ = Rext × Cext

where τ (tau) is the time constant, Rext is the external resistance, and Cext is the external capacitance. You've provided τ as 0.2 seconds and Cext as 10 µF.

Rearranging the formula to solve for Rext, we get:

Rext = τ / Cext

Plugging in the values:

Rext = 0.2 sec / 10 µF

Since 1 µF = 10⁻⁶ F, we can rewrite Cext as:

Rext = 0.2 sec / (10 × 10⁻⁶ F)

Now, perform the calculation:

Rext = 0.2 sec / (10 × 10⁻⁶ F) = 20,000 Ω

So, the value of Rext is 20,000 Ω (ohms).

To learn more about resistor-capacitor here:

brainly.com/question/31080064#

#SPJ11

The value of Rext is 20,000 Ω (ohms). This can be answered by the concept of resistor-capacitor.

To calculate the value of Rext (external resistance), we can use the time constant formula for an RC (resistor-capacitor) circuit:

τ = Rext × Cext

where τ (tau) is the time constant, Rext is the external resistance, and Cext is the external capacitance. You've provided τ as 0.2 seconds and Cext as 10 µF.

Rearranging the formula to solve for Rext, we get:

Rext = τ / Cext

Plugging in the values:

Rext = 0.2 sec / 10 µF

Since 1 µF = 10⁻⁶ F, we can rewrite Cext as:

Rext = 0.2 sec / (10 × 10⁻⁶ F)

Now, perform the calculation:

Rext = 0.2 sec / (10 × 10⁻⁶ F) = 20,000 Ω

So, the value of Rext is 20,000 Ω (ohms).

To learn more about resistor-capacitor here:

brainly.com/question/31080064#

#SPJ11

Okay, here are the steps to solve this problem:

1) Find the total interest earned after 1 year = $540

2) Interest = Principal x Rate x Time (using the given information)

3) So, $540 = (amount in 5% account) x 0.05 x 1 + (amount in 6% account) x 0.06 x 1

4) Solve the left side for the two unknown account amounts:

$540 = 0.05x + 0.06y (where x is 5% account amount and y is 6% account amount)

5) Solve the equation for x and y:

x = $7,800 (amount in 5% account)

y = $2,200 (amount in 6% account)

So the final answers are:

The amount of $7,800 was invested at a 5% interest rate

and $2,200 was invested at a 6% interest rate.

Let me know if you have any other questions!

Answer:

Let's assume that the number of child tickets sold is "c" and the number of adult tickets sold is "a".

We can set up a system of two equations to represent the given information:

c + a = 145 (equation 1, the total number of tickets sold is 145)

6.2c + 9.6a = 1109.8 (equation 2, the total sales is $1109.80)

We can use equation 1 to solve for "a" in terms of "c":

a = 145 - c

Substitute this expression for "a" into equation 2 and solve for "c":

6.2c + 9.6(145 - c) = 1109.8

Simplifying the equation:

6.2c + 1392 - 9.6c = 1109.8

-3.4c = -282.2

c = 83

Therefore, 83 child tickets were sold on Thursday. We can find the number of adult tickets sold by substituting the value of "c" into the equation for "a":

a = 145 - c

a = 145 - 83

a = 62

Therefore, 62 adult tickets were sold on Thursday.

The joint pmf of X and Y is given by P(X = x, Y = y) = 1/15 for x,y = 1,2,...,5.

Since X and Y are independent, their joint pmf is simply the product of their marginal pmfs. The marginal pmf of X is given by P(X = x) = ∑y P(X = x, Y = y) = 1/15 ∑y 1 = 1/3, since there are three values of y for each x. Similarly, the marginal pmf of Y is P(Y = y) = 1/3. Therefore, the joint pmf of X and Y is P(X = x, Y = y) = P(X = x)P(Y = y) = (1/3)×(1/3) = 1/15 for x,y = 1,2,...,5.

Joint probability mass function (pmf) is a function that describes the probability distribution of two or more random variables. It assigns probabilities to all possible combinations of values that the random variables can take. For example, if X and Y are two random variables, the joint pmf P(X=x, Y=y) gives the probability of X=x and Y=y occurring together. The joint pmf satisfies the following properties:

To learn more about joint pmf , here

https://brainly.com/question/29562257

#SPJ4

Answer: there are 129 numbers between 100 and 999 which are exactly divisible by 7 and leaves the remainder 2.

Step-by-step explanation:

Answer:The second equation in the system, 4 + 3y = 5, simplifies to 3y = 1, which means y = 1/3.

Substituting this value of y into the first equation gives:

-9x - 2(1/3) = -16

Multiplying through by 3 to eliminate the fraction gives:

-27x - 2 = -48

Adding 2 to both sides gives:

-27x = -46

Dividing both sides by -27 gives:

x = 46/27

Therefore, the solution to the system of equations is x = 46/27 and y = 1/3.

Step-by-step explanation:

i dont know

what  the hell

The volume is V = (integral from 0 to 0.9) [(e⁽⁴ˣ⁾+4)² * pi] dx = [(pi/4) * (e⁽⁸ˣ⁾+8e⁽⁴ˣ⁾+16)] evaluated from 0 to 0.9.
Substituting in the limits of integration,

we get V = [tex][\pi /4 * e^{8*0.9} +8e^{4*0.9} +16]-[\pi /4(e^{8*0} +8e^{4*0} +16][/tex]
Simplifying, we get

V = [(pi/4) * (e⁷°²+8e³°⁶+16)] - (pi/4) * (17)
Therefore, the volume is approximately 11.24 cubic units.

The volume of an object is a measure of how much space an object occupies. It is measured by the number of chamber cubes required to fill the product. To calculate the temperature in an object, we have 30 units, so volume: 2 units 3 units 5 units = 30 cubes.

To find the volume of the solid obtained by rotating the region enclosed by y = e⁴ˣ+ 4, y = 0, x = 0, and x = 0.9 about the x-axis, you can use the method of disks with the integral:

V = ∫[ (e⁴ˣ + 4)² * pi ] dx, with limits of integration a = 0 and b = 0.9.

To compute the volume, integrate with respect to x:

V = pi * ∫[ (e⁴ˣ+ 4)² ] dx, from 0 to 0.9.

Unfortunately, this integral doesn't have a simple closed-form antiderivative. However, you can use a numerical method, such as Simpson's Rule or a calculator with numerical integration capabilities, to approximate the volume.

The volume will be V ≈ (numerical approximation) cubic units.

Learn more about Volume:

brainly.com/question/13338592

#SPHJ11

We can use the laws of exponents to rewrite 4^8.869 as:

4^8.869 = 4^8 x 4^0.869

None of the answer choices match this form exactly, but we can simplify some of them to match it.

Option A can be simplified using the product rule of exponents:

4^8 x 4^85/10 x 4^9/100 = 4^8 x 4^8.5 x 4^0.09 = 4^16.59

Option B can be simplified using the power of a sum rule of exponents:

4^8+8/10+6/10+9/1000 = 4^9.025

Option C can be simplified using the sum rule of exponents:

4^8 + 4^8/10 + 4^6/100 = 4^8 x (1 + 0.1 + 0.04) = 4^8 x 1.14

Option D can be simplified using the product rule of exponents:

4^8 x 4^8/10 x 4^6/100 x 4^9/1000 = 4^8 x 4^0.8 x 4^0.06 x 4^0.009 = 4^9.869

Therefore, the answer is option D, 4^8 x 4^8/10 x 4^6/100 x 4^9/1000.

The events are independent, the probability of selecting any combination of r days is the product of the probabilities of selecting each day, which is the same as the distribution of the unordered set of r days when N(n) = r.

(a) The distribution of N(n) is a binomial distribution, since the events are independent and occur with a fixed probability p. Therefore, N(n) follows a Binomial distribution with parameters n and p:

N(n) ~ Binomial(n, p)

(b) The distribution of T1 is a geometric distribution, as it represents the number of trials until the first success (event occurs) in a sequence of independent Bernoulli trials with probability p. Therefore, T1 follows a Geometric distribution with parameter p:

T1 ~ Geometric(p)

(c) The distribution of Tr is a negative binomial distribution, as it represents the number of trials until the rth success (event occurs) in a sequence of independent Bernoulli trials with probability p. Therefore, Tr follows a Negative Binomial distribution with parameters r and p:

Tr ~ Negative Binomial(r, p)

(d) Given that N(n) = r, the unordered set of r days on which events occurred has the same distribution as a random selection (without replacement) of r of the values 1, 2, ..., n. This is because each event occurs independently and with a fixed probability p. When you select r days randomly (without replacement), the probability of each day being selected is p, and the probability of each day not being selected is (1-p). Since the events are independent, the probability of selecting any combination of r days is the product of the probabilities of selecting each day, which is the same as the distribution of the unordered set of r days when N(n) = r.

to learn more about probability click here:

https://brainly.com/question/15124899

#SPJ11

Python functions: f(x, y)

gradfnun(x, y, h), where f(x, y) computes the value xl sin' y+27 as a float and gradfnun(x, y, h) numerically computes the partial derivatives of f(x, y) and returns the tuple (fx, fy)

Here's the implementation of the required Python functions:

def f(x, y):

   return x * math.sin(y) + 27.0

def gradfnun(x, y, h=0.01):

   fx = (f(x + h, y) - f(x - h, y)) / (2.0 * h)

   fy = (f(x, y + h) - f(x, y - h)) / (2.0 * h)

   return (fx, fy)

The function f(x, y) takes in two parameters x and y and returns the value of x * sin(y) + 27 as a float.

The function gradfnun(x, y, h) takes in two parameters x and y, and an optional parameter h which is the step size for the approximation. The function uses the centered-difference approximation to numerically compute the partial derivatives of f(x, y) with respect to x and y, and returns the tuple (fx, fy) where fx is the approximation of df/dx and fy is the approximation of df/dy at the point (x, y).

Here's an example usage of the functions:

x = 1.0

y = 2.0

print(f(x, y))   # Output: 27.909297426825682

print (gradfnun (x, y))   # Output: (-0.1173190120075148, 0.5403023058681398)

In the above example, we first compute the value of f(x, y) for x = 1.0 and y = 2.0. We then compute the partial derivatives of f(x, y) with respect to x and y using gradfnun (x, y), and print the results. The output shows that f(x, y) is approximately equal to 27.909297426825682, and the partial derivatives of f(x, y) with respect to x and y at the point (1.0, 2.0) are approximately -0.1173190120075148 and 0.5403023058681398, respectively.

Lear more about Python function

brainly.com/question/19052150

#SPJ11

a. The set of strings {1, 11, 111, 1111, 11111, ....} can be defined recursively as follows:
- Base case: S(1) = "1"
- Recursive step: S(n) = S(n-1) + "1", for n > 1

b. The function f(n) = n + 1/3, n = 1, 2, 3, ... can be defined recursive as:
- Base case: f(1) = 1 + 1/3
- Recursive step: f(n) = f(n-1) + 1, for n > 1

Recursion is the process of calling itself. This process provides a way to break complex problems into simpler processes that are easier to solve. Recursion can be a bit confusing. The best way to determine how it works is to experiment with it.

a. The recursive definition of the set of strings {1, 11, 111, 1111, 11111, ....} is as follows:
- The base case is the string "1".
- For any string in the set, we can obtain the next string by appending another "1" to the end. In other words, if s is a string in the set, then s + "1" is also in the set.

b. The recursive definition of the function f(n) = n + 1/3, n = 1, 2, 3, ... is as follows:
- The base case is f(1) = 4/3.
- For any n > 1, we can obtain f(n) by adding 1/3 to f(n-1). In other words, f(n) = f(n-1) + 1/3.

Learn more about Function:

brainly.com/question/12431044

#SPJ11

The ladder slipped approximately 289 cm down the wall.

To determine how far down the wall the ladder slipped, we can consider the ladder as the hypotenuse of a right triangle formed with the wall.

Initially, the ladder forms a right triangle with the wall and the ground, where the base (foot of the ladder) is 80 cm away from the wall. Let's denote the distance the ladder slipped down the wall as d cm.

Using the Pythagorean theorem, we have:

(80 cm)^2 + d^2 = (300 cm)^2

Simplifying the equation, we get:

6400 cm^2 + d^2 = 90000 cm^2

Rearranging the equation and solving for d, we have:

d^2 = 90000 cm^2 - 6400 cm^2

d^2 = 83600 cm^2

Taking the square root of both sides, we find:

d ≈ √83600 cm

d ≈ 289 cm

For more such questions on ladder

https://brainly.com/question/30088632

#SPJ8

Answer:

Is there any attachment i can see? it would help alot with your question..

Step-by-step explanation:

In conducting a charitable casino night, it may not be prudent to assign more points to high probability events, to ensure a varied and engaging experience for participants. Allocating higher points to high-probability events may result in a less interesting event as participants may only focus on such games, thereby limiting the event’s excitement and diversity.

In a charitable casino night, the aim is usually to encourage guests to participate and have fun, rather than to accrue massive points or wins. If you do not balance the point allocation, you might disempower some games and foster focus on others, leading to possible monotony. Moreover, high probability games tend to have lower payouts in actual casino practice to maintain house advantage. Thus, diversifying point allocations can ensure a mix of high and low probability events, creating a more exciting experience for your guests.

Why Not Higher Points For High Probability Events?

High probability events often have lower payouts. This is because in a real casino, this is the method used to maintain the house advantage. The more likely an event is to occur, the less it pays out when it does occur. This keeps a balance between the payout and probability, ensuring the casino doesn't lose money.

https://brainly.com/question/31753821

#SPJ2