When middle polarizer is rotated rotated at 100 revolutions per minute we can take following steps into consideration-
Weight the 20gm of sugar and dissolve the whole of it in 60cc of distilled water and filter the solution by keeping the filter paper in a funnel in clean beaker. We can add distilled water to make the volume of solution equal to 100 cc. This 20% solution i.e. 0.20gm/cc.Now take 50 cc of 20% solution in measuring cylinder and add 50cc distilled water to form 10% solution. Pour it in beaker labeled as 10% solution.Now take 50cc of 10% solution and add 50cc of distilled water in it to form 5% solution.This effect although not normally done with mechanical rotation, is the basis for making optical modulators that are used in high-speed digital communication systems by inserting the thermometer in solution and note down the temperature.
Remove the caps of polarimeter glass tube and measure the length of tube.
Setting up of sodium source in front of slit will be placed at the principal focus of lens of polarimeter.
[tex]Rotation=\alpha =\frac{\beta }{y}[/tex]
β is the mean angle of rotation and y means length of polarimeter tube in decimeter.
[tex]y=\frac{len. of polarimeter}{10}[/tex]
To know more about polarizer -
https://brainly.com/question/16106487
#SPJ4
a ball is shot at an angle of 45 degrees into the air with initial velocity of 45 ft/sec. assuming no air resistance, how high does it go? how far away does it land? hint: the acceleration due to gravity is 32 ft per second squared.
Answer:
Explanation: GIVEN :
∅ = 45°
INITIAL VELOCITY (V·) = 45 FT/SEC
ACC DUE TO GRAVITY = 32 FT/SEC²
REQUIRED :
MAXIMUM HEIGHT (HMAX) = ? OR how high does it go 2.MAXIMUM RANGE (RMAX) = ? OR how far away does it land?BY APPLYING FORMULA OF MAXIMUM HEIGHT OF PROJECTILE
HMAX = V·²SIN²∅/2G
HMAX = 45²SIN45²/2X32
HMAX = 1012.5/64
HMAX = 15.82FT
FOR MAX RANGE
BY APPLYING FORMULA OF MAX RANGE
R = V·²SIN2∅/G
R = 45²SIN2X45/32
R = 2025 X 1/32
R = 63.28FT
A paint brush is dropped from the top of a tall ladder and free falls to the ground. What changes, if any, would be observed of the velocity of the brush as it falls?.
When the paint brush is dropped from the top the acceleration increases.
Gravity is a force that pulls objects down toward the ground. When objects fall to the ground, gravity causes them to accelerate.
An object in free fall experiences an acceleration of -9.8 m/s². Whether explicitly stated or not, the value of the acceleration in the kinematic equations is -9.8 m/s² for any freely falling object.
Learn more about acceleration here:- https://brainly.com/question/71092
#SPJ4
A bar magnet with its north pole pointing downward is falling toward the center of a horizontal conducting ring. As viewed from above, is the direction of the induced current in the ring counterclockwise
explain why please
The magnet is moving down with the north pole downward, and during the transition, there will be an increase in magnetic flux through the ring, which will produce the induced current through the ring.
When the bar is moved toward loop the flux will increase and the induced current will counter this flux.
The induced current tries to oppose the change in magnetic flux and this is possible just if the current direction is counterclockwise.
Result: The current direction is counterclockwise
To understand more about magnetic flux-
https://brainly.com/question/17120024
#SPJ4
what best describes SONAR waves
Answer:Sonar, short for Sound Navigation and Ranging, is helpful for exploring and mapping the ocean because sound waves travel farther in the water than do radar and light waves.
13. What is the weight of a 2.5 kg watermelon?
Answer:
w=mg
Explanation:
w=2.5(10)
= 25N
MARK ME ON BRAINLIEST PLEASE FOLLOW ME TO
at a particular instant a proton is traveling in the x direction, with speed 5105 m/s. at the location of the proton there is a magnetic field of magnitude 0.33 t in the y direction, due to current running in a nearby coil.what is the directio
The proton would move in x direction with a force of 2.64 x 10 power minus 4
Force = q ( v x b)
q = 1.6 x 10 -19 C
v = 5 x 10 power 5
b = 0.33 t
F = 1.6 x 10 -19 x 5 x 10 power 15 x 0.33
F =2.64 x 10 power minus 4
What is a magnetic field?
The magnetic field can be defined as an area around a magnet which exerts magnetic force and is caused by moving electric charge. Field lines are a visual tool used to represent magnetic fields.
Properties of Magnetic field are;
Magnetic field lines never intersect each other.It takes the least resistant path between the opposite magnetic poles. Path of magnetic lines of force of a bar magnet is closed loops from one pole to the other.The length of magnetic field lines will be the same.Hence in the given question proton would move in x direction with a force of 2.64 x 10 power minus 4
To know more about Magnetic field from the given link
https://brainly.com/question/27721488
#SPJ4
a block is attached to an oscillating spring. the expression below shows its position (cm) vs. time (s). what is the frequency of oscillation?
A 20 rad/s angular frequency is used. An object's rotation or oscillation with regard to time is measured by its angular frequency, a scalar physical quantity. Usually, it is indicated by the Greek letters or.
The SI unit of radians per second, or rpm, is used to measure it (revolutions per minute). It deviates by a factor of two from frequency.
A block is fastened to a spring that oscillates. The function that plots its position (in cm) against time (in s) is as follows:
x= 1.5 cos (20 t) (20 t)
x=A cos w t is the formula for the oscillating particle's general equation.
w= 20 rad/sec is obtained by comparing equations (1) and (2).
Therefore, the oscillation's angular frequency is 20 rad/s.
Learn more about oscillations here-
https://brainly.com/question/29273618
#SPJ4
(a) determine the ratio of the momentum immediately after the collision to the momentum immediately before the collision.
We know duat Momentum is conserved during Collision
P(i) = P(t) - part (a)
Part(b) Momentum = P
K(i) = 1/2 m₁ v₁ (1)²
K = p²/2m
K(1) = p2/2x mi
Solve for Vf.
m₁ x v₁ (i) = (m₁ +m₂) Vf.
V+ M₁ x V₁ (1)/(m₁ +m2)
Kf = p2 / (2x (m, +m₂))/p2(2xm,)) P2
= m₁ /m1+m2 = K.E Ratio
When two objects collide their total momentum before the collision is equal to their total momentum after the collision. This is the law of conservation of momentum. where M is the mass of the pendulum, m is the mass of the sphere, and v is the velocity of the center of mass of the composite system after the collision. According to the law of conservation of momentum, the sum of the momentum of the two bodies before the collision equals the sum of the momentum after the collision.
Learn more about Collision here:- https://brainly.com/question/24915434
#SPJ4
why can the sunlight that illuminates the earth be approximated by plane waves, whereas the light from a nearby lamp cannot?
The wavefront is parallel to the motion's direction. The spherical wavefront still maintains its shape with a "nearby" lamp, therefore we cannot ignore the wavefront's shape.
In contrast to the shorter waves of blue light, the rings would be more widely separated for the longer wavelength red light. Since the wavefront from the Sun is coming from a point source, it is actually spherical. However, because of how tiny the Earth is in relation to the Sun and how far away the Sun is from the Earth. Since the pattern is made up of parallel straight-line-shaped fringes rather than the fringes of overlapping circles, Young's interference experiment with slits results in a crisper fringe pattern than with pinholes.
Learn more about wavefront here-
https://brainly.com/question/28879561
#SPJ4
The gravitational field of the Moon is weaker than that of the Earth. It
pulls on each kilogram of mass with a force of 1.6N. What will be the
weight of a 50kg mass on the Moon? [4]
On the Moon, a 50 kg mass weighs 80 N.
What is moon?
The only natural satellite of Earth is the Moon. With a diameter that is roughly one-fourth that of the Earth, it is the fifth largest satellite inside the Solar System and the largest and also most massive when compared to its parent planet. According to the geophysical definitions of a term, the Moon qualifies as a satellite planet because it is a planetary-mass object with such a differentiated rocky body. There isn't much of an atmosphere, hydrosphere, as well as magnetic field there. With a surface gravity of 0.1654 g, it has a gravity that is roughly one-sixth that of Earth. Jupiter's moon Io is the only satellite inside the Solar System that is known to have a higher gravity and density. The main cause of Earth's tides, with an average orbital distance of 384,400 km (238,900 mi) or about 30 times the diameter of the planet, is the gravitational influence of the moon.
>Weight of 1 kilogram= 1.6 N
>Weight of 50 kilograms= 1.6 x 50
= 80
∴ On the Moon, a 50 kg mass weighs 80 N.
To learn more about moon
https://brainly.com/question/21190014
#SPJ1
consider the jet engine and mount indicated in fig.3 and model it as a mass on the end of a beam. the mass of the engine is usually fixed. find an expression for the value of the transverse mount stiffness, k, as a function of the relative speed of the bird, v, the bird mass, the mass of the engine and the maximum displacement that the engine is allowed to vibrate.
The expression for the value of the transverse mount stiffness, k, as a function of the relative speed of the bird, v, the bird mass, the mass of the engine and the maximum displacement is k = 1 / m ( m[tex]_{b}[/tex] v / I x I )²
m x ( t ) + k x ( t ) = F δ ( t )
I x I = F / m ω[tex]_{n}[/tex]
m = Mass of engine
k = Stiffness of transverse mount
F = Magnitude of impulse
ω[tex]_{n}[/tex] = Natural frequency
ω[tex]_{n}[/tex] = √ k / m
I x I = F / m ( √ k / m )
I x I = F / √ k m → ( 1 )
For bird,
F = m[tex]_{b}[/tex] v
Substitute this momentum value in ( 1 ),
I x I = m[tex]_{b}[/tex] v / √ k m
√ k = m[tex]_{b}[/tex] v / I x I √ m
k = 1 / m ( m[tex]_{b}[/tex] v / I x I )²
Therefore, the expression for the value of the transverse mount stiffness, k, as a function of the relative speed of the bird, v, the bird mass, the mass of the engine and the maximum displacement that the engine is allowed to vibrate is k = 1 / m ( m[tex]_{b}[/tex] v / I x I )²
The question is incomplete. The complete question is :
Consider the jet engine and mount indicated in fig.3 and model it as a mass on the end of a beam. the mass of the engine is usually fixed. find an expression for the value of the transverse mount stiffness, k, as a function of the relative speed of the bird, v, the bird mass, the mass of the engine and the maximum displacement that the engine is allowed to vibrate. Fig 3. is shown in the image attached below.
To know more about transverse mount stiffness
https://brainly.com/question/23777757
#SPJ4
a weightlifter lifts a set of weights a vertical distance of 2.00 m. if a constant net force of 350 n is exerted on the weights, what is the net work done on the weights?
The net work done on the weights is 700 joules.
What is net force?
The total of all forces acting on the object is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion. When there are a lot of forces acting on a system, the term "net force" is used. The total of all forces acting on an object is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion. When there are a lot of forces acting on a system, the term "net force" is used. When a force is applied to a body, numerous additional forces, such as gravitational force Fg, frictional force Ff, and the normal force, also work to balance the applied force.
To learn more about net force
https://brainly.com/question/11556949
#SPJ4
Which of the following correctly shows the offspring probability for a cross between two yellow pea plants (Yy x YY), if yellow is the dominant trait?
The offspring probability for a cross between two yellow pea plants (Yy x YY) if yellow is the dominant trait is 100 percent yellow offspring and 50 percent of each genotype (i.e. Yy and YY genotypes).
What is genetic probability?The expression genetic probability makes reference to the likelihood to inherit a given phenotype and or a genotype from a genetic cross. In this case, one of the parents is homozygous dominant and therefore all F1 will be dominant.
Therefore, with this data, we can see that genetic probability makes reference to the phenotypes and genotypes in the progeny.
Learn more about genetic probability here:
https://brainly.com/question/851793
#SPJ1
Describe what is occurring in the following image
Where do rock formations go when they are subducted?
Group of answer choices below
A. Above the surface
B. Into the ocean
C. Into the mantle
D. To the core
Rock formations go Into the mantle when they are subducted.
What is Subducted rock?Subduction is a geological process in which the oceanic lithosphere is recycled into the Earth's mantle at convergent boundaries. Where the oceanic lithosphere of a tectonic plate converges with the less dense lithosphere of a second plate, the heavier plate dives beneath the second plate and sinks into the mantle.
Subduction is a geological process in which the oceanic lithosphere is recycled into the Earth's mantle at convergent boundaries.
Rock formations go Into the mantle when they are subducted.
To learn more about rock refer to the link:
brainly.com/question/19930528
#SPJ1
what best describes the part of the graph where the classical kbos are found? eccentric (out-of-round) orbits that stay farthest from the sun eccentric (out-of-round) orbits that get closest to the sun nearly circular orbits that stay farthest from the sun nearly circular orbits that get closest to the sun
The statement that best describes the part of the graph where the classical (Kuiper Belt Objects)kbos are found is "nearly circular orbits that stay farthest from the sun".
What are Kuiper Belt Objects?
The Kuiper belt object is described as a circumstellar disc in the outer Solar System, extending from the orbit of Neptune at 30 astronomical units (AU) to approximately 50 AU from the Sun.
The Kuiper belt object like the asteroid belt, consists mainly of small bodies or remnants from when the Solar System formed. While many asteroids are composed primarily of rock and metal, most Kuiper belt objects are composed largely of frozen volatiles (termed "ices"), such as
methane, ammonia, and water.Learn more about the Kuiper belt object at: https://brainly.com/question/1289023
#SPJ1
Sand falls from a conveyor belt at a rate of onto the top of a conical pile. The height of the pile is always three-eighths of the base diameter. How fast are the height and the radius changing when the pile is m high?.
The radius changing when the pile is 0.031 m^3/min high
What is a conical pile?
Bulk material that has been discharged from the end of a static conveyor falls freely, forming conical stockpiles. The descent of material through the gusty air produces blinding plumes of dust in open-air conical stacks. Geometrical domes assist your plant to achieve its environmental objectives by obstructing the wind and containing this dust.
h=3d/8 = 3r/4
dh/dt = 3/4dr/dt
dV/dt = 11 m^3/min
V=1/3pi*r^2*h
dV/dt = pi/3 [2rhdr/dt + r^2 dh/dt]
In an instant, h is given
h=8m
r=32/3 m
dV/dt = pi/3 [2rhdr/dt + r^2 dh/dt]
11 = pi/3 [2*32/3*8dr/dt + 32*32/9* 3/4 dr/dt]
dr/dt = 0.041 m^3/min
dh/dt = 0.031 m^3/min
To learn more about conical pile the link is given below:
https://brainly.com/question/13960224
#SPJ4
During glucose catabolism, 686 kcal of energy are made available to do work. A minimum of 686 kcal are required for the anabolism of the same molecule. In practice, more energy is required. Why is this the case?.
More energy is needed because not all energy transduction processes are 100 percent effective. More cellular energy is needed since there are inefficiencies.
Mechanism of production of cellular energyCellular energy is mostly produced by the breakdown of carbohydrates, especially glucose. the total oxidative decomposition of glucose into CO2 and water
G°′= -686 kcal/mol is the amount of free energy produced by the process. Glucose is oxidized within cells in a sequence of stages associated with the creation of ATP to capture this free energy in usable form.
Almost all cells go through the process of glycolysis, which is the first step in the breakdown of glucose. Without oxygen, glycolysis takes place and can supply all of the anaerobic organisms' metabolic energy. Glycolysis, however, is only the first step in the degradation of glucose in aerobic cells.
To Know more about glucose catabolism at:
https://brainly.com/question/14436819
#SPJ4
a rod-shaped magnet is suspended from its midpoint so that it is parallel to the ground and so that it can freely rotate. what will happen when two such magnets are placed in close proximity (but not close enough that they can touch)? will they align in a parallel or anti-parallel configuration?
Both rod-shaped magnets will align in a parallel configuration as similar poles and the magnetic field will repel each other.
What are Magnets?Anything that creates a magnetic field is considered to be a magnet. The most noteworthy characteristic of a magnet—a force that pulls on other ferromagnetic elements like iron, steel, nickel, cobalt, etc.—is caused by this invisible magnetic field, which also attracts or repels other magnets.
A piece of equipment built from a substance that has been magnetized and produces a consistent magnetic field is called a permanent magnet. A typical illustration is a fridge magnet used to keep notes on the door of the refrigerator. The term "ferromagnetic" refers to materials that can be magnetized and are also strongly attracted to a magnet. These comprise several naturally occurring minerals, some alloys of rare-earth metals, and the elements iron, nickel, and cobalt and their alloys.
To learn more about magnets from the given link :
https://brainly.com/question/2841288
#SPJ4
A car ha a ma of 820 kg. It tart from ret and travel 41 m in 3. 0. What i the net force applied to the car?
The correct for net force applied to the car is 7462 N.
What is the relation between Force, mass and acceleration?
It states that the rate of change of velocity of an object is directly proportional to the force applied and takes place in the direction of the force. It is summarized by the equation: Force (N) = mass (kg) × acceleration (m/s²). Thus, an object of constant mass accelerates in proportion to the force applied.
Explanation:
F=ma
s=ut+ ½ at²
=> a=2(s−ut)t²
= > a = { 2 ( 41 – 0 x 3 ) } / 3²
= 2 (41) / 9
= 9.1 m / s²
F = ma = 820 x 9.1 = 7462 N
To learn more about relation between Force, mass and acceleration from the given link
https://brainly.com/question/25802819
#SPJ4
what is the most common injury related to electrical hazards?
The most common injury related to electrical hazards are Electrical burns.
What are electrical hazards?
The term "electrical hazard" refers to a major workplace risk that puts employees in danger of suffering burns, electrocution, shock, arc flash or arc blast, fire, or explosions.Electrical shock and burns are risks when contacting energized sources.The body enters the electric circuit, resulting in an electrical shock (when an individual comes in contact with both wires of an electrical circuit, one wire of an energized circuit and the ground, or a metallic part has been energized by contact with an electrical conductor).An electrical burn is a type of skin burn that develops when your body comes into contact with electricity. It is possible for electricity to pass through your body when it comes into contact with it. When this occurs, the voltage has the potential to harm tissues and organs.
Hence, The most common injury related to electrical hazards are Electrical burns.
To learn more about electrical hazard from the given link
https://brainly.com/question/14140830
#SPJ4
A laser pulse with a wavelength of 545 nm contains 4. 40 mj of energy. How many photons are in the laser pulse?.
The correct answer is 1.20 * 10¹⁶ photons are in the laser pulse.
What is the relation of Number of photons with energy?
A single photon has the energy: hv or = (h/2), where h is the Planck constant. 6.62x1034 Joules per second. About 10–19 Joules (not much!) are contained in each photon of visible light, which makes up the photons per second in a beam.
Given as per questions:
Wavelength (λ) of the laser pulse = 545 nm = 5.45 * 10⁻⁹ m
Total energy of pulse = 4.40 mJ
To determine:
The number of photons in the laser of a given energy
Explanation:
Energy per photon (E) = hc/λ
where h = planck's constant = 6.626 *10⁻³⁴ Js
C = speed of light = 3*10⁸ m/s
λ = wavelength
E = 6.626 10⁻³⁴ Js 3*10⁸ms-1 /5.45 * 10⁻⁹ m = 3.65 * 10⁻¹⁹ J
Now,
No of photons = total energy/Energy per photon
= 4.40 * 10⁻³ J* 1 photon / 3.65 * 10⁻¹⁹ J = 1.20 * 10¹⁶ photons
Thus the laser pulse contains 1.20 * 10¹⁶ photons.
To learn more about relation of Number of photons with energy from the given link
https://brainly.com/question/17227537
#SPJ4
help with this pls i will pay more
Answer:
D & F
Explanation:
Both are correct, and none of the others are, as far as my knowledge takes me.
how much work did the movers do (horizontally) pushing a 41.0- kg crate 10.3 m across a rough floor without acceleration, if the effective coefficient of friction was 0.60?
W=2485.65 J ,work did the movers do friction force a 41.0- kg crate 10.3 m across a rough floor without acceleration
What is a basic friction force?Two surfaces that come into contact and slide against one another produce a force known as frictional force. Several aspects that influence the frictional force include: The surface texture as well as the amount of force attracting them together have the most effects on these forces.
What outcomes does friction produce?It generates heat, which is useful for warming our bodies or specific areas of any object. Power is also lost as a result. It makes noise during every operation. We are able to walk, run, dance, etc. due to friction.
To know more about friction force visit:
https://brainly.com/question/1389727
#SPJ4
A block weighing 7.6 N requires a force of
3.1 N to push it along at constant velocity.
What is the coefficient of friction for the
surface?
The coefficeint of friction given that the object weighing 7.6 N requires a force of 3.1 N to push it along at constant velocity, is 0.41
How do I determine the coefficient of friction?We know already that coefficient of friction is related to frictional force and normal reaction according to the following formula:
Frictional force (N) = coefficient of friction (μ) × normal reaction (N)
F = μN
Using the above formula, we can obtain the coefficient of friction as illustrated below:
Weight of object = 7.6 NForce (F) = 3.1 NNormal reaction (N) = Weight of object = 7.6 NCoefficient of friction (μ) =?Frictional force (N) = coefficient of friction (μ) × normal reaction (N)
F = μN
3.1 = μ × 7.6
Divide both sides by 7.6
μ = 3.1 / 7.6
μ = 0.41
Thus, we can conclude that the coefficient of friction is 0.41
Learn more about coefficient of friction:
https://brainly.com/question/21287409
#SPJ1
if a beetle is travelling at a speed of 2 cm/sec how far will it go in 1 minute
Answer: 120cm
Explanation: It will go 120cm because theres 60 sec in one minute and each second the beetle is travelling 2cm.
moment of inertia is moment of inertia is the rotational equivalent of mass. the point at which all forces appear to act. the time at which inertia occurs. an alternative term for moment arm.
Moment of inertia is moment of inertia is the rotational equivalent of mass because the rotational equivalent of mass
The torque of a rigid body is governed by a property called the moment of inertia, also referred to as the mass moment of inertia, angular mass, second moment of mass, or, more precisely, rotational inertia. In physics, the term "moment of inertia" refers to the quantitative measurement of a body's inertia with respect to rotation, or the resistance that a body shows when a torque is used to modify the rotational speed of an object around an axis. The axis may or may not be fixed, and it may or may not be internal or external. A property of matter known as inertia is the tendency for it to remain at rest or to move uniformly in a straight line without being affected by outside forces.
Learn more about moment of inertia here:
https://brainly.com/question/15246709
#SPJ4
the two charges are brought together until they touch for enough time for the charge to equalize between the two spheres. the charges are then returned to their original places. what is the repulsive force on each charge with their new charges?
Coulomb force, also known as electrostatic force or Coulomb interaction, is the electric charge of a particle or object's ability to attract or repel other particles or things.
What exactly is a Coulomb force?The force of force of attraction between two like it or unlike charges is known as the Coulombic force or an electrostatic force. The two charges are spaced apart and have opposite charges with equal magnitude.
What example of coulomb's law is there?Comb and paper scraps When a comb is scraped against hair, charges are transferred to the teeth of the comb. Paper scraps with opposite charges or those with neutral charges are drawn to the charged comb. Coulomb's law is well shown by the electrical interaction between both the paper fragments and the comb.
To know more about Coulomb force visit:
https://brainly.com/question/11141051
#SPJ4
A guitar string vibrates at a frequency of 440 Hz. A point at its center moves in SHM with an amplitude of 3.0 mm and a phase angle of zero. (a) Write an equation for the position of the center of the string as a function of time. (b) What are the maximum values of the magnitudes of the velocity and acceleration of the center of the string? (c) The derivative of the acceleration with respect to time is a quantity called the jek. Write an equation for the jek of the center of the string as a function of time, and find the maximum value of the magnitude of the jek.
The equation of the position of string from the center is 3.0 sin(2π × 440t), the maximum values of acceleration, velocity and jek are 1.29 × 10⁴ m/s², 8.26 m/s and 1.29 × 10⁴ m/s³.
(a) The following equation describes the position of the string's center as a function of time,
y(t) = A sin(2πft), where A is the amplitude (3.0 mm), f is the frequency (440 Hz), and t is time. Substituting the given values, we get,
y(t) = 3.0 sin(2π × 440t)
(b) The maximum value of the magnitude of the velocity of the center of the string occurs when the displacement is maximum, i.e., at t = 0. Therefore,
vmax = 2πfA
vmax = 2π × 440 × 3.0 × 10⁻³
vmax = 8.26 m/s
For acceleration,
amax = 4π²f²A
amax = 4π² × 440² × 3.0 × 10⁻³
amax = 1.29 × 10⁴ m/s²
(c) The jek of the center of the string as a function of time is given by:
j(t) = Aω²cos(2πft) where ω is the angular frequency, given by ω = 2πf.
The maximum value of the magnitude of the jek occurs when the displacement is zero, i.e., at t = T/4, where T is the period of the string. Substituting the given values, we get,
jmax = Aω²
jmax = 4π²f²A
jmax = 1.29 × 10⁴ m/s³.
To know more about equation for the position, visit,
https://brainly.com/question/29997379
#SPJ1
A ball dropped onto a trampoline returns to the same height after the rebound.
a) Describe the energy change of the ball from the point of release to the top of the rebound
b) What can you say about the energy of the ball at the point of release compared with at the top of the rebound?
c)Describe how you would use test in a) to see which of the three trampolines is the bounciest
a. As the ball is dropped, the energy at the point of release is all potential energy, which then changes to kinetic and potential as the ball falls, then all kinetic just when the ball hits the trampoline and back to potential when the ball rebounds to its previous height.
b. The energy at the point of release is equal to the energy at the top of the rebound
c. The height of the rebound of the ball can be used to test which trampoline is bouncier.
What is the law of conservation of energy?The law of conservation of energy states that in a closed system, energy is neither created nor destroyed but can be transformed from one form to another.
According to the law of conservation of energy, the total energy in a system is always conserved. This means that the total energy before and after a change is the same.
For the ball dropped from the trampoline, the energy of the ball is a sum of potential energy and kinetic energy. At some point, the energy of the ball is all potential or all kinetic, whereas at various points, it is a sum of the two energy forms.
Learn more about the law of conservation of energy at: https://brainly.com/question/2847431
#SPJ1