Roll 4 fair six-sided dice. Let X be the value of the lowest die.
Prove that E(X) = (2275/1296)
Hint: For a given k, what is P r(X = k)?
Please show all work

The given sequence an = (7n+2)/(8n) converges, and its limit is 7/8

To determine whether the sequence converges or diverges, and to find the limit if it converges, we will analyze the given sequence an = (7n + 2) / (8n).

Step 1: Simplify the sequence by dividing the numerator and the denominator by the highest power of n, which in this case is n^1.

an = (7 + 2/n) / (8)

Step 2: Take the limit of the sequence as n approaches infinity.

lim (n -> ∞) [(7 + 2/n) / 8]

Step 3: As n approaches infinity, the term 2/n approaches 0.

lim (n -> ∞) [(7 + 0) / 8]

Step 4: Simplify the limit.

lim (n -> ∞) [7 / 8] = 7/8

Since the limit exists and is a finite value (7/8), we can conclude that the sequence converges, and its limit is 7/8.

Learn more about converges: https://brainly.com/question/31440916

#SPJ11

The simulation that could be used to fairly represent the situation is A. Use a computer to randomly generate 4 numbers from 1 to 3. Each time 1 appears, it represents a strawberry taffy.

The probability of each taffy being strawberry is 0.25, so the probability of all 3 taffies being strawberry is:

0.25 * 0.25 * 0.25 = 0.015625 or approximately 1.56%

Therefore, the likelihood of all taffies being strawberry is very low.

The simulation that could be used to fairly represent the situation is to use a computer to randomly generate 4 numbers from 1 to 3. Each time 1 appears, it represents a strawberry taffy. This simulates the probability of each taffy being strawberry being 0.25 or 25%.

Learn more about simulation on

https://brainly.com/question/15892457

#SPJ1

To demonstrate that the limit lim(x,y)→(0,0) [tex](x^2)/(x^2y^2 + (x-y)^2)[/tex] does not exist, we can use two different paths:

Path 1: Let y = x In this path, we substitute y with x in the expression: lim(x,x)→ [tex](0,0) (x^2)/(x^2x^2 + (x-x)^2)[/tex] = lim(x,x)→ [tex](0,0) (x^2)/(x^4)[/tex]As x approaches 0, the expression simplifies to: lim(x→0) [tex](x^2)/(x^4)[/tex] = lim(x→0) [tex]1/x^2[/tex] When x approaches 0, [tex]1/x^2[/tex] goes to infinity.

Therefore, the limit along this path does not exist.

Path 2: Let y = 0 In this path, we substitute y with 0 in the expression: lim(x,0)→(0,0)[tex](x^2)/(x^2(0)^2 + (x-0)^2)[/tex] = lim(x,0)→ [tex](0,0) (x^2)/(x^2)[/tex] As x approaches 0, the expression simplifies to: lim(x→0) (x^2)/(x^2) = lim(x→0) 1

When x approaches 0, the expression equals 1, which is a finite value.

Since the limits along Path 1 and Path 2 are not equal, we can conclude that the limit lim(x,y)→(0,0) [tex](x^2)/(x^2y^2 + (x-y)^2)[/tex] does not exist.

Learn more about limit,

https://brainly.com/question/30339394

#SPJ11

The value of x when y=0 from the given absolute value equation is,

⇒ x = -1.

Here, The graph for the absolute equation y=|x+2| - 1 is given.

Now, Rewrite in vertex form and use this form to find the vertex (h,k).

(-2, -1)

To find the x-intercept, substitute in 0 for y and solve for x.

To find the y-intercept, substitute in 0 for x and solve for y.

x-intercept(s): (-1,0),(-3,0)

y-intercept(s): (0, 1)

Here, y>0

So, 1 = |x+2|-1

2=x+2

x=0

When y<0

So, -1=|x+2|-1

x+2=0

x=-1

When y=0

0=|x+2|-1

1=x+2

x=-1

Therefore, the value of x when y=0 from the given absolute value equation is x=-1.

To learn more about a absolute value equation visit:

brainly.com/question/2166748.

#SPJ1

It is a rectangle because the opposite sides were parallel and congruent

Given data,

Let the quadrilateral be represented as WXYZ

Now , the line WX is parallel and congruent to the side YZ

So, they have the same slope

And , the line segment WZ is parallel and congruent to the side XY

So , they have the same slope

Therefore , the quadrilateral is a rectangle

Hence , the figure is a rectangle and the opposite sides have same slope

To learn more about equation of line click :

https://brainly.com/question/14200719

#SPJ1

The probability that Lin gets another turn is 1/60

Here, Lin will get a turn if both the cube and card have the same number.

A cube is numbered as 1, 2, 3, 4, 5, and 6

And the deck of 10 cards numbered 1 through 10

We can observe that there are only 6 (1 to 6) numbers which can follow above condition.

So, the chances of getting 6 in dice equals to 1/6

and the chances of getting 6 in card equals 1/10

Thus, the chance of getting both at once would be,

1/6 × 1/10

= 1/60

Therefore, the required probability is 1/60

Learn more about the probability here:

https://brainly.com/question/15124899

#SPJ1

The series [infinity] ∑k=0 k 10 k converges since the terms of the series approach zero as k increases, and the series satisfies the ratio test.

The ratio of successive terms is 10, which is less than 1, indicating that the series converges.

To show this using the digits of π, we can express the series as [infinity] ∑k=0 c k 10 k , where c k represents the kth digit of π. Since the digits of π are bounded and do not increase indefinitely, the terms of the series also approach zero.

Additionally, the ratio of successive terms can be expressed as c k+1 / c k 10, which is less than 1 for all k, indicating convergence. Therefore, the series [infinity] ∑k=0 k 10 k converges, both in general and when expressed using the digits of π.

To know more about ratio test click on below link:

https://brainly.com/question/15586862#

#SPJ11

The 96% confidence interval for the soda cans' diameters manufactured by CO 4 is approximately 51.1 mm to 52.9 mm.

To calculate the 96% confidence interval for the soda cans' diameters, we need to consider the sample mean, standard deviation, and sample size, as well as the appropriate Z-score for the desired level of confidence.

The terms you've provided are:
- Company (CO 4) - A company that manufactures soda cans.
- Diameter of 52 mm - The average diameter of the soda cans.
- Sample size of 18 - The number of soda cans in the sample.
- Standard deviation of 2.3 mm - The measure of dispersion in the sample.

Given the information, we first need to calculate the standard error (SE), which is the standard deviation (2.3 mm) divided by the square root of the sample size (18). This can be calculated as follows:

SE = 2.3 / √18 ≈ 0.54

For a 96% confidence interval, we use a Z-score of 2.05, which means we are 96% confident that the true population means lies within this interval. Now, we can calculate the confidence interval:

Lower limit = Sample mean - (Z-score × SE) = 52 - (2.05 × 0.54) ≈ 51.1 mm
Upper limit = Sample mean + (Z-score × SE) = 52 + (2.05 × 0.54) ≈ 52.9 mm

So, the 96% confidence interval for the soda cans' diameters manufactured by CO 4 is approximately 51.1 mm to 52.9 mm. This means we are 96% confident that the true average diameter of the soda cans produced by the company lies within this range.

Know more about Z-score  here:

https://brainly.com/question/25638875

#SPJ11      

An expression to find the distance between the two jellyfish is B - A.

The distance is 2.0 meters.

In Mathematics and Geometry, a number line simply refers to a type of graph with a graduated straight line which comprises both positive and negative numbers that are placed at equal intervals along its length.

This ultimately implies that, a number line primarily increases in numerical value towards the right from zero (0) and decreases in numerical value towards the left from zero (0).

Therefore, the required expression for the distance between the two jellyfish is given by;

Distance = B - A

Distance = 0.5 - (-1.5)

Distance = 0.5 + 1.5

Distance = 2.0 m.

Read more on number line here: brainly.com/question/22515080

#SPJ1

ωc = 1/RC. where R is the resistance of the circuit and C is the capacitance. Once we know ωc, we can substitute it into the equation for vo(t) and evaluate the expression.

When ω=ωc, the output voltage can be found by substituting ωc for ω in the equation for vo(t):

vo(t) = a*cos(ωc*t + ϕ)v

The values of a, ω, and ϕ are given in the problem:

a > 0
-180∘ < ϕ ≤ 180∘
ω = angular frequency of the input signal

So, to find the output voltage when ω=ωc, we need to know the value of ωc. This value depends on the circuit parameters and can be calculated using the formula:

ωc = 1/RC

Without more information about the circuit, we cannot provide a specific answer for the output voltage when ω=ωc.

Learn more about voltage here: brainly.com/question/29445057

#SPJ11

The CLI option on the MODEL statement of an MLR analysis in PROC GLM produces confidence intervals for the mean response at all predictor combinations in the dataset. b

The CLI option stands for "Confidence Level of Intervals," and it specifies the level of confidence for the confidence intervals produced.

By default, the CLI option is set to 0.95, which means that the confidence intervals produced will have a 95% level of confidence.

These confidence intervals provide a range of values within which the true mean response at a particular combination of predictor values is expected to fall with a specified level of confidence.

They can be useful for assessing the uncertainty associated with the estimated mean response at different combinations of predictor values and for making inferences about the relationships between predictors and the response variable.

The CLI option, which stands for "Confidence Level of Intervals," defines the degree of confidence in the confidence intervals that are generated.

The CLI option's default value of 0.95 designates a 95% degree of confidence for the confidence intervals that are generated.

With a given degree of confidence, these confidence intervals show the range of values within which the real mean response for a specific set of predictor values is anticipated to fall.

They can be helpful for determining the degree of uncertainty surrounding the predicted mean response for various combinations of predictor values and for drawing conclusions on the connections between predictors and the response variable.

For similar questions on MLR

https://brainly.com/question/30363057

#SPJ11

Answer:  sqrt287

Step-by-step explanation:

sqrt(24^2-17^2)=sqrt287

Answer:

BC/CD = DE/EF

The slope of this line is 2/3. From B, go up two units to C, then right three units to D.

(1) To show that X has a subsequence X' such that either X' is in A or X' is in B, we can use the fact that A and B are subsets of the metric space (M,d) to construct two subsequences, one consisting of terms from A and the other consisting of terms from B.

Let X_A be the subsequence of X that consists of all terms in A, and let X_B be the subsequence of X that consists of all terms in B. If either of these subsequences is infinite, then we are done. Otherwise, both A and B are finite sets, and we can construct a subsequence X' by interleaving the terms from X_A and X_B in any way we choose.

For example, suppose A = {a1, a2, a3} and B = {b1, b2}. Then X_A = (a1, a2, a3) and X_B = (b1, b2), and we can construct the subsequence X' = (a1, b1, a2, b2, a3). This subsequence has terms from both A and B, but we can easily extract a sub-subsequence consisting only of terms from A or only of terms from B if we wish.

(2) To show that the union of two sequentially compact sets in a metric space (M,d) is sequentially compact, we need to show that every sequence in the union has a convergent subsequence. Let A and B be two sequentially compact subsets of M, and let X be a sequence in A ∪ B. By (1), X has a subsequence X' that is either in A or in B.

If X' is in A, then it has a convergent subsequence by the sequential compactness of A. This subsequence is also a subsequence of X and therefore converges in A ∪ B. If X' is in B, then it has a convergent subsequence by the sequential compactness of B, and we can again argue that this subsequence converges in A ∪ B.

Therefore, every sequence in A ∪ B has a convergent subsequence, and so A ∪ B is sequentially compact.
(1) Since X = (xk) is a sequence in A ∪ B, each term xk is either in A or in B. Divide the terms of X into two subsequences: X_A consisting of terms in A, and X_B consisting of terms in B. At least one of these subsequences must be infinite (since a finite subsequence cannot exhaust the entire sequence X).

Without loss of generality, assume X_A is infinite. Then X_A is a subsequence of X consisting only of terms in A. Let X' = X_A. Then X' is a subsequence of X such that X' is in A. Similarly, if X_B were infinite, we could construct a subsequence X' in B.

(2) To show that the union of two sequentially compact sets in a metric space (M, d) is sequentially compact, we need to show that any sequence in the union has a convergent subsequence.

Let A and B be two sequentially compact sets in (M, d), and let X = (xk) be a sequence in A ∪ B. By part (1), we know that X has a subsequence X' such that either X' is in A or X' is in B. Without loss of generality, assume X' is in A.

Since A is sequentially compact, X' has a convergent subsequence X'' in A. Thus, X'' is a convergent subsequence of X in A ∪ B. Similarly, if X' were in B, we would have a convergent subsequence in B. Therefore, the union A ∪ B is sequentially compact.

Visit here to learn more about metric space brainly.com/question/30509303

#SPJ11

The closer the value of r to O the greater the variation around the line of best fit. Different... Are there guidelines to interpreting Pearson's correlation coefficient? Yes, the following guidelines have been proposed: ...

The solution is : 1 / 13, is the probability that the card chosen is a queen.

Here, we have,

given that,

A card is chosen at random from a standard deck of 52 playing cards.

so, we get,

Total number of cards = 52

Probability of choosing a queen:

In a deck of card there are 4 queens

Probability = 4/52

                  = 1 / 13

Hence, 1 / 13, is the probability that the card chosen is a queen.

To learn more on probability click:

brainly.com/question/11234923

#SPJ1

complete question:

A card is chosen at random from a standard deck of 52 playing cards. What is the probability that the card chosen is a queen?

The given statement, "smoothing parameter (alpha) close to 1 gives more weight or influence to recent observations over the forecast" is true.

The smoothing parameter (alpha) defines the weight or impact given to the most recent observation in the forecast when we apply a smoothing approach such as Simple Exponential Smoothing. If alpha is near to one, we are assigning greater weight or influence to the most recent observation, which makes the forecast more sensitive to changes in the data. In other words, an alpha value near one indicates that we are depending on current data to estimate future values.

If alpha is near zero, the forecast will be less sensitive to changes in the data and will depend more largely on previous observations. This is because we are giving equal weight or influence to all observations, regardless of when they occurred.

To learn more about Smoothing Techniques, visit:

https://brainly.com/question/13181254

#SPJ11

Answer:

$47.82

Step-by-step explanation:

If the price of the jacket is $45 and the sales tax rate in Connecticut is 6.35%, then the total price Megan will need to pay for the jacket including tax is:

$45 + ($45 x 6.35%) = $47.82

To calculate the amount that needs to be on the gift card for Megan to buy the jacket using only the gift card, we simply subtract the total price of the jacket from $0:

$0 - $47.82 = -$47.82

Therefore, Megan needs a gift card with at least $47.82 on it to be able to buy the jacket using only the gift card.

Answer:

To calculate the amount needed on the gift card for Megan to be able to buy the jacket using only the gift card, we need to add the sales tax rate of 6.35% to the price of the jacket.

The price of the jacket is $45, so we can calculate the sales tax by multiplying $45 by 6.35% (0.0635).

$45 * 0.0635 = $2.86

The total cost of the jacket including sales tax is $45 + $2.86 = $47.86.

Therefore, Megan needs a gift card with at least $47.86 on it to buy the jacket using only the gift card.

Step-by-step explanation:

The answer is A. True. When working with big data, the sample size is so large that the variability in the data almost completely disappears.

Variability is the degree of difference between values in a set of data. It is a measure of how spread out the values are from the mean or average of the set.

When dealing with smaller datasets, there is typically more variability. This is because a smaller sample size does not represent the entire population of data, and therefore does not provide an accurate representation of the underlying population of data. This variability can make it more difficult to draw valid conclusions from the data.

However, when working with a large sample size, the variability virtually disappears. This is because the data is spread across so many data points that the differences between individual data points become negligible. The result is that the data becomes more consistent and easier to analyze.

For more questions related to datasets

https://brainly.com/question/27358262

#SPJ1

The statement is expressed as:

[tex]y \alpha 1/x[/tex]

To convert to an equation introduce k, the constant of variation.

[tex]y=k * 1/x\\[/tex]

To find k use the condition that [tex]x = 12[/tex] when [tex]y = 5[/tex]

[tex]y=k/x[/tex]

[tex]5=k/12[/tex]

[tex]k=5*12[/tex]

[tex]k=60\\[/tex]

Therefore,  [tex]y =60/x[/tex] is the function.

To learn more about the constant of variation,

brainly.com/question/14254277

Answer:

yes

Step-by-step explanation:

because it has a dramatic decrease in value

Answer:

$0.70

Step-by-step explanation:

Let the cost of an orange be represented by o and the cost of a mango be represented by m.

According to the problem, we can set up the following system of equations:

2o + 5m = 4.5

4o + 3m = 4.1

We can solve for o and m using elimination or substitution. Here's one way to solve it using elimination:

Multiply the first equation by 4 and the second equation by -2 to eliminate o:

8o + 20m = 18

-8o - 6m = -8.2

14m = 9.8

m = 0.7

Substitute m = 0.7 into one of the equations to solve for o:

2o + 5(0.7) = 4.5

2o + 3.5 = 4.5

2o = 1

o = 0.5

Therefore, the cost of an orange is $0.50 and the cost of a mango is $0.70.

Hope this helps!

Sum of the series [infinity] ln n² / (8 + 7n²)² is π² / 6.

Series [infinity] 1/n² convergent to π² / 6.

We can use the limit comparison test.

First, note that both ln n² and (8 + 7n²)² are positive for all n ≥ 1.

Let a_n = ln n² / (8 + 7n²)².

Then, consider the series b_n = 1/n².

We know that b_n is a convergent p-series with p = 2.

Next, we take the limit of the ratio of a_n and b_n as n approaches infinity:

lim (n→∞) a_n / b_n = lim (n→∞) (ln n² / (8 + 7n²)²) / (1/n²)

Using L'Hôpital's rule twice, we can simplify this limit as follows:

= lim (n→∞) [(2/n) / (-28n / (8 + 7n²))]

= lim (n→∞) -14n / (8 + 7n²)

Since the numerator and denominator both approach infinity as n approaches infinity, we can apply L'Hôpital's rule again:

= lim (n→∞) -14 / (14n)

= 0

Since the limit is finite and positive, we can conclude that the series [infinity] ln n² / (8 + 7n²)² converges by the limit comparison test.

To find its sum, we can use a known result that the series [infinity] 1/n² converges to π² / 6.

Therefore, the sum of the series [infinity] ln n² / (8 + 7n²)² is π² / 6.

Learn more about convergent.

brainly.com/question/15415793

#SPJ11

The general solution to the differential equation dv/dt = -32 - kv is:

[tex]v = (Ke^{(-t)} - 32)/k[/tex] if kv > 0

[tex]v = (32 - Ke^{(-t)})/k[/tex] if kv < 0

To solve this differential equation, we need to separate the variables and integrate both sides. We can write:

dv/(32+kv) = -dt

Now, we can integrate both sides. For the left-hand side, we can use the substitution u = 32 + kv, which gives:

dv/u = -dt

Integrating both sides, we get:

ln|u| = -t + C

where C is the constant of integration. Substituting back for u, we get:

ln|32 + kv| = -t + C

To solve for v, we can exponentiate both sides:

[tex]|32 + kv| = e^{(-t+C)} = Ke^{(-t)}[/tex]

where K is another constant of integration.

Taking the absolute value of both sides is necessary because kv can be negative. To solve for v, we need to consider two cases: kv is positive and kv is negative.

If kv is positive, then we have:

[tex]32 + kv = Ke^{(-t)}[/tex]

Solving for v, we get:

[tex]v = (Ke^{(-t)} - 32)/k[/tex]

If kv is negative, then we have:

[tex]-(32 + kv) = Ke^{(-t)}[/tex]

Solving for v, we get:

[tex]v = (32 - Ke^{(-t)})/k[/tex]

Therefore, the general solution to the differential equation dv/dt = -32 - kv is:

[tex]v = (Ke^{(-t)} - 32)/k[/tex] if kv > 0

[tex]v = (32 - Ke^{(-t)})/k[/tex]if kv < 0

where K and k are constants of integration that depend on the initial conditions.

Learn more about differential equation

brainly.com/question/14620493

#SPJ11

If the first equation is 3x + 2y = 5, a second equation that would make this system have no solution is: A. 6x + 4y = 10.

If the first equation is y = 2x - 5, a second equation that would make this system have no solution is: A. 4x - 2y = 10.

The statement that correctly describes the solution to this system of equations is: A. there is no solution.

The statement that correctly describes the solution to this system of equations is: A. there is no solution.

The statement that correctly interprets Xaysha's solution is: C. there is no solution since 5 = 7 is a false statement.

The statement that correctly interprets Sophina's solution is: A. the solution is x = 0.

In Mathematics, no solution is sometimes referred to as zero solution, and an equation is said to have no solution when the left hand side and right hand side of the equation are not the same or equal.

This ultimately implies that, a system of equations would have no solution when the line representing each of the equations are parallel lines and have the same slope or coincide i.e both sides of the equal sign are the same and the variables cancel out.

For Sophina's solution, we have;

7x = 6x

7x - 6x = 0

x(7 - 6) = 0

x = 0

Read more on equation and no solution here: brainly.com/question/4110837

#SPJ1