The temperature of a gas as the volume of the gas increases and the temperature also rises.
Explain about the pressure?A location inside a gas experiences pressure in all directions. The pressure force at a gas' surface acts perpendicular to the surface. If the gas is moving overall, the measured pressure will differ according to the motion's direction.
The force that is dispersed over a unit area per time perpendicular to an object's surface.
Pressure is the term for the physical force that is exerted on an object. The force is applied perpendicularly to the objects' surfaces per unit area. F/A is the basic formula for pressure (Force per unit area). Pressure is measured in Pascals (Pa). There are four distinct types of pressure: gauge, absolute, ambient, and differential.
To learn more about pressure refer to:
https://brainly.com/question/25736513
#SPJ1
A valence issue is an issue ______.
A valence issue is an issue on which most voters and candidates share the same position.
A valence issue is one on which the majority of voters are in agreement. Voters use valence issues to assess a political party's effectiveness in achieving a particular goal or quality because valence issues are symbolic of such things.
The valence issue notion is a technique of speculating on the reasons why voters support opposing parties in a general election. The theory was developed in response to Donald Stokes' critique of theories of voting behavior, which Stokes considered as being excessively limited to notions of a voter's reasoning and ideological impulses, as with spatial models of party competition. Since Stokes noted that voters occasionally were not constrained by ideology or self-interest during his assessment of past U.S. elections.
To learn more about Valence Please click on the given link:
https://brainly.com/question/371590
#SPJ4
divide the compounds below into electron-poor and electron-rich groups.
The electron-poor groups are the ones that make up the majority of the electrons in the material.
This is why it is critical that you divide compounds by the number of electrons they contain. In other words, if you have a compound with two electrons, you want to look at the two-electron group, not the three-electron group. So, if you have a compound with two electrons, you should look at where the two electrons are rather than where they were. Start with the group containing the two electrons and work your way down. Essentially, we want to divide compounds into three groups, three electron groups. The first group has a low electron density, the second has a high electron density, and the third has no electrons. The first group is the easiest to distinguish, but you can see that the first group contains the most electron-rich compounds. The second group is more difficult to distinguish. Because the compounds in the group will have two electrons, it is electron rich. The third group is the most difficult to enter, and it's clear that the second group contains the most electron-free compounds.
To learn more about electron-poor groups please click on below link
https://brainly.com/question/14396304
#SPJ4
3) Identify the noble gas in the following list A) helium B) nitrogen C) oxygen D) gold E) chlorine 4
) The atomic number of an atom is equal to the number of A) nuclei B) neutrons C) neutrons plus protons D) electrons plus protons E) protons
5) Consider a neutral atom with 30 protons and 34 neutrons. The atomic number of the elementis A) 30 B) 32 C) 34 D) 64 E) 94
6) How many proton are in an isotope of sodium with a mass number of 25% B) 14 C) IS D) 25 E) 32 Isotopes are stoms of the
Helium is the noble gas out of the following options given.
The amount of protons an atom contains determines its atomic number.
The atomic number of a neutral atom with 30 protons and 34 neutrons is 30.
An isotope of sodium with a mass value of 25 has 11 protons.
Gases that are noble or inert. Helium, neon, argon, krypton, xenon, and radon are the noble gases, or inert gases, that make up group 8A (or VIII A) of the periodic table. The name of these elements refers to how little they react with other elements or compounds.
The atomic number is determined by the number of protons, which is always equal to the number of electrons in a neutral atom.
Sodium has an atomic number of 11. Since the atomic number in this instance is 11, the number of protons is likewise 11. The number of protons is equal to the atomic number.
To know more about atomic number click on the link below:
https://brainly.com/question/621740
#SPJ4
What is the pathway of an enzyme?
Enzyme is the protein that catalyzes a biological chemical reaction. Pathways of enzymes called metabolic pathways that convert a substrate molecule through a series of metabolic intermediate.
The pathways of enzyme called metabolic pathway is a series of interconnected biochemical reactions that convert a substrate molecule or molecules through a series of metabolic intermediates yielding a final product or products. Chemical reactions in metabolic pathways rarely take place spontaneously. Each reaction step is catalyzed by a protein called an enzyme. Enzymes are important for catalyzing all types of biological reactions. Those that require energy as well as those that release energy. This involves two pathways. Anabolic pathways and catabolic pathways. Anabolic pathways synthesize molecules and require energy. Catabolic pathways break down molecules and produce energy.
To learn more about Metabolic Pathways please visit:
https://brainly.com/question/14041305
#SPJ4
[URGENT!] - Equilibrium Problem
Consider the following reaction:
4A + 2B ⇌ 2C + D (all gases at STP)
Initially, the reaction system is at equilibrium, with [A] = [B] = 2.60 M, and [C] = [D] = 3.10 M, making K = 0.0964. The reaction takes place in a 5.00-liter container. Moles of B are removed until the new equilibrium concentration of C is 2.70. How many moles of B were removed?
The equilibrium constant expression for this reaction is:
K = [C]2[D] / [A]4[B]2
We can rearrange this expression to solve for [B]:
[B] = √([A]4[C]2[D] / K)
Plugging in the given values, we get:
[B] = √((2.60 M)4(2.70 M)2(3.10 M) / 0.0964)
= √(6.76 M)
= 0.26 M
The initial concentration of B is 2.60 M, so the change in concentration of B is 2.60 M - 0.26 M = 2.34 M.
Since the reaction takes place in a 5.00-liter container, the number of moles of B that were removed is 2.34 M * 5.00 L = 11.7 moles.
Therefore, 11.7 moles of B were removed.
Is NaCl ionic or covalent?
Answer:
ionic
Explanation:
compounds that are ionic are formed as a result pf a transferring of electrons that creates ions; which exert an electrostatic force upon each other.
a 2.5000 g sample of epsom salt (maghesiun sulfate hydrate) is heated until the crystals arereduced to a dry powder. after cooling the residue was found to weigh 1.7525 g. calculate g
The mass of the water of crystallization is 0.7475 g.
What is the mass of the water?We know that a hydrated compound is a compound that contains in it the water of crystallization. This is the water that becomes attached to the structure of the compound that is in question.
In this case, we have that the salt that is question is a hydrate of magnesium sulfate and we have.
Mass of the hydrated salt = 2.5000 g
Mass of the anhydrous salt = 1.7525 g
Mass of water present = 2.5000 g - 1.7525 g
= 0.7475 g
Learn more about water of crystallization:https://brainly.com/question/29442515
#SPJ1
Missing parts;
A 2.5000 g sample of epsom salt (maghesiun sulfate hydrate) is heated until the crystals arereduced to a dry powder. after cooling the residue was found to weigh 1.7525 g. calculate the mass of the water.
Consider the pictured representations of electromagnetic waves. Which electromagnetic wave corresponds to each description? Lowest frequency Choose... Second Highest energy Choose... Highest energy Choose. Shortest wavelength Choose...
In the picture representation of electromagnetic waves,
a) Lowest frequency - C
b) Second Highest energy - A
c) Highest energy - B
d) Shortest wavelength - B
Wavelength can be defined as the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in space or along a wire. In wireless systems, this length is usually mentioned in meters (m), centimeters (cm), or millimeters (mm).
If the wavelength of electromagnetic waves is low, the frequency of a wave is also low and the energy is low.
If the wavelength of electromagnetic waves is short, the frequency of a wave is also high and the energy is high.
Read more about Wavelength :
https://brainly.com/question/10728818
#SPJ4
How many moles of MgO is formed?
The moles of MgO produced in the reaction of magnesium and oxygen are 2 moles.
Magnesium oxide is created during the burning of magnesium metal when it combines with airborne oxygen. A compound is a substance made up of atoms from various elements that are chemically linked to one another. This molecule is created by the chemical interaction between oxygen and magnesium.
In the balanced chemical reaction of magnesium and oxygen is 2 Mg + O₂ ⇒ 2 MgO.
Since values are not mentioned in the question, so we are considering 2 moles of magnesium and 1 mole of oxygen.
In terms of magnesium
2 moles of Mg ⇒ 2 moles of MgO
In terms of oxygen
1 mole of O₂ ⇒ 2 moles of MgO
Hence, magnesium and oxygen in 2:1 moles react to form magnesium oxide.
To know more about Moles.
https://brainly.com/question/20486415
#SPJ4
Balance the following equations to fulfill the law of conservation mass.
C6H12O6+ 6O2+6H2O =
C + ___ S8 ___ CS2
___ Na + ___ O2 ___ Na2O
___ C6H6 + ___ O2 ___ CO2 + ___ H2O
The solution to the preceding equation is: 6C6H6 + 6O2 + 6CO2 + 6H2O = 7C6H12O6 + 3O2 + -18H2O
Negative coefficients indicate that the matching chemicals should be placed on the reaction's opposing side.
Water, Dioxygen, and Glucose are equal to Benzene, Dioxygen, Carbon Dioxide, and Water.
Response Type
Combustion
Redox (Oxidation-Reduction) (Oxidation-Reduction) It's possible that the reaction C6H12O6 + O2 + H2O = C6H6 + O2 + CO2 + H2O is a redox one.
C6H12O6 Glucose, O2 Dioxygen
H2O, or water
C6H6 Benzene
CO2, or carbon dioxide
A simple sugar called glucose is a key source of energy for living things and is found in many different types of carbohydrates.
Combustion: A fuel and an oxidant, often atmospheric oxygen, engage in a high-temperature exothermic (heat-releasing) redox (oxygen-adding) chemical process that results in the production of oxidized, frequently gaseous products in a mixture known as smoke.
To know more about Oxidation visit this:
https://brainly.com/question/16976470
#SPJ1
What are the 3 properties of starch?
The properties of starch are that they are colorless and tasteless in nature and are the source of carbohydrates in our diet.
Starch are insoluble in cold water, alcohol, and other solvents.
Starch is composed of long chains of sugar molecules which are linked together linked together forming bonds and linkages. The most basic type of starch is amylose it is a linear polymer and another example is amylopectin which is a branching polymer.
Starch is the storage part in a plant where they store the excess energy in the form of glucose. This glucose is an important part of human diet and it provides energy as taken in the form of sugar.
Amylase is a starch-breaking enzyme found in saliva and the pancreas the first step in the digestion process is the breaking down of starch by enzymes.
To learn more about starch
brainly.com/question/14278135
#SPJ4
What is the orbital hybridization of C?
When a carbon atom bonds with one s-orbital and two p orbitals, it becomes sp2 hybridised. Between the three atoms, two single bonds and one double bond are formed. The hybrid orbitals are arranged in a triangle with bonds at 120° angles.
What is Hybridization of carbon ?Four sp3 orbitals are created when the 2s and all three of the 2p orbitals of carbon combine. Through an overlap of the sp3 and s orbitals, these orbitals subsequently form a link with four hydrogen atoms to form methane.
Carbon consists of six electrons. In the 1s orbital, just outside the nucleus, there will be two of them. The following two will enter the orbital phase 2s. The rest will be split into two distinct 2p orbitals.
Learn more about Hybridization here:
https://brainly.com/question/22765530
#SPJ4
Which Of The Following Is Not True?Which Of The Following Statements Is True?
The claim that over-the-counter medications require a doctor's prescription is referred to as being untrue.
What Does Medicine Mean?
This is also known as a medicine, and people use it to diagnose and treat illnesses and other forms of medical ailments. Antimalarials, antibiotics, and other examples all have particular uses and modes of action.
It is untrue that all over-the-counter (OTC) medications require a doctor's prescription because some OTC medications can be purchased without a doctor's prescription. These medications are referred to as OTC medications. Some analgesics and first aid supplies used immediately or during emergencies are medications that don't require a prescription.
To learn more about medications please click on below link
https://brainly.com/question/11098559
#SPJ4
Answer:
If you're on plato edmentum this is the answer, if not then it's not.
Post Test: Government
Economics
Question #6
This answer is 100% correct:
Economic stability means fair distribution of goods in an economy.Full employment is a macroeconomic goal.Inflation is a fall in the prices of goods and services.Inflation is a rise in the prices of goods and services. Microeconomics studies the economy as a whole.
Explanation:
I took the test and this is 100% it
Hope this helped!
A method for determining the quantity of dissolved oxygen in natural waters requires a series of redox reactions. Balance the following chemical equations in that series under the conditions indicated (and include phases):
a. in basic solution
Mn^(2+) (aq) + O2 (g) ---> MnO2 (s)
b. in acidic solution
MnO2 (s) + I^(-) (aq) ---> Mn^(2+) (aq) + I2 (s)
c. in neutral solution
I2 (s) + S2O3^(2-) (aq) ---> I^(-) (aq) + S4O6^(2-) (aq)
Balance the following equation:
in basic solution: Mn²⁺ (aq) + O₂ (g) + 4OH⁻(aq) → MnO₂ (s) + 2H₂O (l)in acidic solution: MnO₂ (s) + I⁻ (aq) + 4H ⁺ → Mn²⁺ (aq) + I₂ (s) + 2H₂O (l)in neutral solution: I₂ (s) + 2S₂O₃²⁻(aq) → 2I⁻ (aq) + S₄O₆²⁻ (aq)A chemical equation is a symbolic writing of a chemical reaction. The chemical formulas of the reactants are written to the left of the equation and the chemical formulas of the products are written to the right
In basic solution:
Step-1: The number of Mn and O atoms on both sides is checked. They are equal.Step-2: The charges are looked in. The left-hand side (LHS) has net 2+ on Mn the Right-hand side (RHS) has a net O charge. Since it is a basic reaction, we neutralize the charge on Mn2+ (LHS) by adding 2 negative charges ie, 2 OH⁻ ion ⇒ Mn²⁺ + O₂+ 2OH⁻ → MnO₂Step-3: The newly introduced H on LHS is balanced on RHS by inserting a respective number of water molecules. ⇒ Mn²⁺ + O₂ + 4OH⁻ → MnO₂ + 2H₂O.Step-4: Toy to balance the number of O, H, and then Mn. ⇒ Mn²⁺ (aq) + O₂ (g) + 4OH⁻(aq) → MnO₂ (s) + 2H₂O (l)In acidic solution:
Step-1: Balance number of atoms: (O by adding H₂O)Step-2: Balance the charges by adding protons and electronsStep-3: Combine LHS and R.H.S of both equations Canal out electrons. ⇒ MnO₂ (s) + I⁻ (aq) + 4H ⁺ → Mn²⁺ (aq) + I₂ (s) + 2H₂O (l)in neutral solution:
It doesn't involve any proton or hydroxide ion in the reaction. There is no 2S₂O₃²⁻ ion and S₄O₆²⁻, the correct form is S₂O₃²⁻ and S₄O₆²⁻. This reaction comes in the third series of the Winkler method of determining Dissolved Oxygen.
Learn more about balance the equation at https://brainly.com/question/11904811
#SPJ4
What is the purpose of the absorption and radiation by land and water lab?
The purpose of the absorption and radiation by land and water lab is to analyze the earth's surface.
The Land and Water Absorption and Emission Laboratory evaluate how different surface materials on Earth absorb heat, and how the angle of separation affects how the planet's surface heats up. Designed to show you what to do. It took me about an hour to complete the lab. Earth's surface absorbs much more solar radiation than water. This is because most land surfaces are darker than water. This of course means that it absorbs more solar radiation and heat. Water reflects most of the solar radiation that reaches its surface back to the atmosphere. , the portion of the Earth's surface covered in ice and snow that affects how much of the Sun's solar radiation is absorbed, warmed or reflected by the planet.
Learn more about the Land and water lab in
https://brainly.com/question/19933723
#SPJ4
now consider this plot, which shows the boiling points of all the common compounds between p-block elements and hydrogen. what are the formulas of the two other compounds (besides water) that experience hydrogen bonding?
Separation of two molecules joined by a hydrogen bond requires 10 to 30 kJ mol–1, roughly 10 times the energy needed to overcome dipole forces. Thus hydrogen bonding can account for the unusually high boiling points of NH3, H2O, and HF
Which of the following ch3 ch2 ch3 ch3 ch3 br does have the highest boiling point?The listed compounds have molecular weights between 44 and 46.Extensive intermolecular H-bonding occurs in CH3CH2OH, which causes molecules to link together.It has the greatest boiling point as a result.
Which substance among CH3CH3 B CH3OCH3 C CH3CH2OH D ch3cooh has the greatest boiling point?Alcohols have an extremely high boiling point due to their hydrogen bonds.Since ethanol experiences a lot of hydrogen bonding, it has the hottest boiling point.
To know more about hydrogen bonding visit:
https://brainly.com/question/15099999
#SPJ4
Will the depression in freezing point be the same or different if 0.1 M sugar or 0.1 M glucose is dissolved in one liter of water?
Because both treatments are non-electrolytes and produce this very same proportion of solute particles, the freezing point elevation will be identical in both solutions.
Nonelectrolyte: what is it?A substance is referred to as a nonelectrolyte if it doesn't conduct electricity in either the molten or watery form. Many molecules, including ethanol and sugar, include nonelectrolytes. These substances do not release ions when they mix with water.
What substances don't have electrolytes?A material is a nonelectrolyte if it does not ionize at all in water. Explanations: The majority of carbon compounds lack electrolytes. The majority of contribution of natural are fats, carbohydrates, and alcohols.
Briefing:⧍T ∝ molality,
molality=mole solute/weight solvent
weight of solvent = density *volume
=1000*1 kg
= ⧍T ∝ moles
moles =given mass(m) / molecular mass(M)
=0.1/M
M of sugar(sucrose)=342
M of glucose=180
⧍T∝1/M,
= ⧍T(sugar) /⧍T(glucose)
= [1/M(sugar)] / [1/M(glucose)]
= 180/342<1
therefore,
⧍T(sugar)/⧍T(glucose)<1
⧍T(sugar)<⧍T(glucose)
To know more about non-electrolytes visit:
https://brainly.com/question/13805479
#SPJ4
A gas is heated from 263k to 298k. The volume is increased from 24. 0l to 35. 0l. If the original pressure was 1. 00 atm, what is the new pressure?.
Assume that a hydrogen atom's electron has been excited to the n = 8 level. How many wavelengths of light can be emitted as this excited atom loses energy?
Here is an example
Explanation:
From n = 5 , the electron can drop to n =
4, 3, 2, 1. Thus, there will be 4
possibilities
Now, the electron that dropped to n = 4 can drop to n =3,2,1 This will give 3 possibilities
The electron at n = 3 can drop to n =2,1 This gives 2 possibilities
Finally, the electron at n = 2 can drop to n = 1 . This gives 1 possibility
Thus in total the number of ways in which the electron can de-excite is :
4 + 3 + 2 + 1 = 10
10 different wavelengths of light can be emitted as the electron loses energy
from n = 5 level
Drawbacks include noise and the release of corrosive chemicals.
Geothermal energy is the use of earth heat to produce electrical energy through geothermal power plants. With the corrosive chemicals of geothermal energy come some drawbacks.
The contamination of the air is one such issue. Heavy metals like sulphur, radon salts, and harmful gases that harm the ecosystem are brought up by steam from the earth. Hazardous sludge is created throughout the energy generation process, contaminating the soil and water. Heavy metals present cause pipes to corrode. Construction of geothermal facilities must be done with the utmost care to minimise influence on the local environment. In the first possibility, the chemical's hue is a physical characteristic of a substance. In the presence or absence of a specific chemical, a substance's hue serves as physical identification. Consider sulphur .
To learn more about corrosive chemicals please click on below link
https://brainly.com/question/29022592
#SPJ4
What are 4 ways to identify an ionic compound?
Answer:
Binary Ionic Compounds Containing a Metal and a Nonmetal. A binary compound is a compound formed from two different elements. ...
Ionic Compounds Containing a Metal and a Polyatomic Ion. Metals combine with polyatomic ions to give ionic compounds. ...
Acids and Acid Salts. ...
Binary Compounds Between Two Nonmetals.
Explanation:
What type of reaction is melting?
Ice melting is an example of an endothermic reaction because it absorbs heat.
Is melting an occurrence?When ice melts spontaneously, there is a physical shift. But if you employ a reactant, like salt, to hasten the process, it becomes a chemical reaction. While exothermic reactions emit heat, endothermic reactions absorb it. A example endothermic process is ice melting.
Why does melting not involve a chemical process?Since there is no chemical change occurring to the ice as it melts, ice melting is not a chemical reaction. The water molecules remain unchanged and continue to be water molecules.
To know more about endothermic reaction visit:-
https://brainly.com/question/23184814
#SPJ4
Is pewter toxic to humans?
CuS + AgNO3(aq) > Cu(NO3)2(aq) + Ag(s) balanced
Answer:
CuS + 2AgNO3(aq) > Cu(NO3)2(aq) + Ag2S
Explanation:
The reaction is CuS + AgNO3(aq) > Cu(NO3)2(aq) + Ag2S
so the balanced reaction is CuS + 2AgNO3(aq) > Cu(NO3)2(aq) + Ag2S
Cu = 1
S = 1
Ag = 2
NO3 = 2
Does neon have more valence electrons than oxygen?
the group 16 elements have the general valence electron configuration ns2npx . what is the numerical value of x ?.
The numerical value of x is 4 for the elements belonging to group 16.
The outermost shell or orbital of an atom is called its valence shell. The electrons in these shells take part in bonding with other atoms. It may be fully filled or half-filled. The group 16 elements have the general electronic configuration ns2 npx. The general valence electron configuration of group 16 elements is ns2 np4. Group 16 elements have six electrons in their valence shell. Thus, the value of x=4.
The group 16 elements are oxygen (O), Sulfur (S), Selenium (Se), Tellurium (Te), Polonium (Po) etc.
Thus, the valence electrons will be same for the elements is ns2 np4 and therefore the numerical value of x is 4.
To learn more about valence electrons check the ink below:
https://brainly.com/question/371590
#SPJ4
What is the mass of 0.45 mol of ammonium sulfate, (NH4)2SO4?
Answer:
59.46 g
Explanation:
To answer this question, the molecular weight of ammonium sulfate must be computed. To accomplish this, the weights of the individual elements must be noted.
N=14.01[tex]\frac{g}{mol}[/tex]
H=1.01[tex]\frac{g}{mol}[/tex]
S=32.07[tex]\frac{g}{mol}[/tex]
O=16.00[tex]\frac{g}{mol}[/tex]
To compute the molecular weight:
[tex]2[14.01\frac{g}{mol}+4(1.01\frac{g}{mol})]+32.07\frac{g}{mol}+4(16.00\frac{g}{mol})=132.14\frac{g}{mol}[/tex]
To calculate the mass:
[tex]0.45 mol(\frac{132.14g}{1mol})=59.463g[/tex]
Chromium can help you build bigger muscles and stay lean when you are lifting weights.
True or False?
False; Chromium can help you build bigger muscles and stay lean when you are lifting weights.
With an atomic number of 24 and the chemical symbol Cr, chromium is a chemical element. It is the first part of group 6. It is a steely-gray, strong, brittle transition metal that is shiny. [4]
The great corrosion resistance and hardness of chromium metal make it valuable. It was a big development in the production of steel when it was realised that steel could be converted into stainless steel, which has a high resistance to rust and discolouration. 85% of commercial use is made up of chrome plating (chromium electroplating) and stainless steel combined. Chromium is highly valued as a metal because it can be polished to a high degree while maintaining its brilliance. Polished chrome reflects about 70% of the visible spectrum and over 90% of infrared radiation.
Learn more about Chromium here:
https://brainly.com/question/681602
#SPJ4
What is the concentration of solution if 20gm solid dissolved in 180 gm of water?
Calculate the concentration in terms of mass by solution mass % for a solution that has 20g of sugar dissolved in 180g of water.
The answer is that 20g of sugar dissolves in 180g of water. 180g plus 20g equals 200g for the solution's total mass.
Mass of the solute / Total mass of the solution 100, i.e. 20/200 100 = 10%, is how you calculate the mass by mass percentage of the solution.
What dissolves in water?Coffee, salt, and sugar are a few items that can dissolve in water. These things break down. Usually, warm or hot water makes them dissolve more quickly and readily. Sand and pepper are both soluble in hot water, but not at room temperature.
To know more about Dissolved visit:
brainly.com/question/2364287
#SPJ4
What element only has 3 electrons?
Answer:
The element that only has 3 electrons is Lithium