Answer: A feasible solution for a linear program is a solution that satisfies all the constraints of the linear programming problem. There could be many solutions that satisfy all the restrictions. Any point in the feasible region is a feasible solution for the LPP. A feasible solution for a linear program is a solution that satisfies all the constraints.
Explanation: Hope this helps: ^
True of false an understaffed store can cause loss of inventory
Answer:
probably true, if it's understaffed people are more likely to steal and the overworked workers that still remain are likely to make more mistakes
True.
It's important to keep a balance of store labor with incoming consumer traffic. Understaffing affects the impact of profitability.
What best describes the relationship between missionaries and Native Americans?
Answer:
Missionaries taught the Native Americans to read but allowed them to keep their customs. Native Americans and missionaries fought in battles
Explanation:
sorry if this doesn't help u but i hope it does!
1. What are hand tools ? *
1 point
2. Give one example and one use of the following handtools I. Measuring tool II. Cutting Tool III. Striking tool *
6 points
3. Name the hand tool used to drive nails *
1 point
4. Name the hand tool used to cut plastic and metal pipes *
1 point
5. Which hand tool is used to clamp your work piece to the work table ? *
1 point
6. What are portable power tools? *
1 point
7. Name the power tools used to carryout the following operations I. Boring holes II. Cutting curves III. Sanding *
3 points
8. List three examples of stationary machines *
3 points
Answer:
Microsoft Word - Hand tools SON
why are you directed not to touch the holder or discharge tube whule the power to the supply to the gas tube is on?
Every profession has its rules and regulations. The reason why we are directed not to touch the holder or discharge tube while the power to the supply to the gas tube is on because;
The discharge tube can create about 5000 V of voltage when connected to power.The gas discharge tubes is often very hot when used with the power supplies and one should not to touch them until they are cooled down.
We have been taught to stay far was from a high voltage area or system and also we should not dare to touch it.
There are different reasons why we should about these high voltage system or are; The reason is that;
Because high voltages often reduce the impedance of our skin, thereby making electricity to flow through our bodies.Learn more about Voltage from
https://brainly.com/question/1176850
what are the potential problems with the ag gag laws
Answer:
Ag-gag laws pose a threat to a wide spectrum of values and issues Americans care about. Social issues potentially negatively impacted by ag-gag laws include, but are not limited to: Animal Welfare. Food Safety.
Explanation:
(b) The application of user centred design can lead to innovative products such as the umbrella shown in Figure 9.
Explain the concept of user centred design and how it may have influenced the design of the umbrella shown in Figure 9. (6 marks)
Answer:
the concept of user centred design is the idea of putting your clients best needs in mind. you need to be empathic and understanding of how to make their life easier. by doing research you can do this. for example the design in figure 9 shows an umbrella with a canopy. the canopy can deflect rain and still have the easy design of an umbrella. this makes it not only easier to use but functional.
Explanation:
i wrote this myself so copy it or just rewrite it, it doesnt matter
Please help for our stem project :(
Explain how Ratio and proportion affect the strength of the Bridge.
STEM Project
Answer:
Do you have some a picture
Situation: Peter is designing a new hybrid car that functions on solar power. He is currently working on sketches of his design using geometric patterns and shapes.
Answer:
whats the question?
Explanation:
what element is the primary constituent of ferrous alloys?
Which is NOT an example of labour intensive industry?
Healthcare practitioner
steel production industry
local farmers
small cakery
Answer:
small cakery
Explanation:
it only makes food it does not cut logs, wood etc.
Answer:
small cakery
Explanation:
cakery or bakery don't require labour services almostThere hardly one or two person works so it can't be called labour intensive industryJohn has an exhaust leak in his Acura Integra GS-R, What steps would he take to fix the leak in time for his inspection?
Answer:
Explanation:
Fist you need to identify where the leak is coming from. You can do this by either listening for the leak or spraying soapy water on the exhaust to look for air bubbles coming out of the exhaust. Depending on the spot of the leak there are many ways you can fix this leak.
1. Exhaust clamp
2. Exhaust putty
3. Exhaust tape
4. New exhaust
Exhaust clamp is best used for holes on straight pipes.
Putty is best used on welds or small holes like on exhaust manifolds or welds connecting various pieces like catalytic converters, mufflers, or resonators.
Tape will work best on straight pipes with holes.
New exhaust is for when the thig is beyond repair, like rust.
Now good luck because working on exhausts is a pain.
true or false tensile forces are smaller in arch bridges
Answer:
True
Explanation:
The tensile forces are small in most arches and usually negligible.
what are some benfits of getting involved with 4h
Answer:
the kids can get smarter and make the country where they live better
4h can help with making the next generation better, and better if we help them
Please help me do this with my exam tomorrow.
Indicate the target item of the time to use, preserve and turn it in time. In your family and locality, what methods of harvesting, management and processing do you apply? Ex example
Answer:
ddddddddddddddddddddddddddddd
Explanation:
cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
MANUFACTURING QUESTION PLEASE HELP
Answer:
"He then pours the metal into a mold and allows it to solidify."
if a population has no predadors and plenty of available resources, how might that population change
Answer:
B (exponential growth )
Explanation: wish u the best bby <33
why is a plastic or metal restrictor placed in either the end of the vent pipe or in the vapor-vent hose on some vehicles?
Answer:
To help the vehicle better function
Explanation:
The plastic or Metal material there is to block certain things that shift our of place and can get caught up in the vent, the materials prevent thing from entering in and out of the vent bc if anything should go in the vent it can cause severe vehicle problems
Hope this help❤
A factory hires a consultant to recommend ways to improve its productivity. The consultant notices that the production floor is strewn with tools and machines that are not continually in use. Which of the 5S philosophies should the consultant recommend to the management to establish better productivity?
A.
set in place
B.
sort
C.
standardize
D.
shine
E.
sustain
Answer:
B
Explanation:
Keep only what is used. Remove all unnecessary items. Red tag these items for review.
Write a system of equations to describe the situation below, solve using any method, and fill in the blanks.
Nicole and Josie are both selling cookie dough for a fundraiser. Although Nicole has already sold 4 tubs, Josie hasn't sold any yet. If Nicole starts selling 5 tubs per day and Josie begins selling 6 tubs per day, they will eventually sell the same amount of cookie dough. How many tubs will each sell? How many days will that take?
Nicole and Josie will each sell
tubs of cookie dough in
days.
The number of tubs that each of them sold is; 24 tubs each
The number of days it will take for both of them to sell same amount of tubs is; 4 days
Number of cookies that Nicole had already sold = 4 tubs
Number of cookies sold by Josie before counting = 0 cookies
Nicole now sells 5 tubs per day and
Josie now sells 6 tubs per day.
Let the number of days it will take for them to have sold the same amount of cookies be d.
Thus;
5d + 4 = 6d + 0
6d - 5d = 4
d = 4 days
Thus, total number of cookies for both are;
Total for Nicole = 4 + 5(4) = 24 cookies
Total for Josie = 6(4) = 24 cookies
Read more about proportion at; https://brainly.com/question/870035
can someone help showing the steps please
Answer:
a) 20 Ω
b) 1 A
c) 10 V on each
d) 1/3 A through each
e) 10 W in R1, 3 1/3 W in the others
f) 20 W
Explanation:
The three 30 Ω resistors are in parallel with each other, so will have an equivalent resistance of (30 Ω)/3 = 10 Ω.
(a) The total circuit resistance is 10 Ω + 10 Ω = 20 Ω.
__
(b) All of the current supplied by the battery passes through R1. The current supplied by the battery is ...
I = V/R = (20 v)/(20 Ω) = 1 A
__
(c) The voltage drop on R1 is (1 A)(10 Ω) = 10 v. Subtracting that from the battery voltage gives the voltage drop on the other resistors:
20 v -10 v = 10 v . . . . drop on R2, R3, R4
__
(d) The current through resistors R2, R3, R4 is ...
I = V/R = (10 v)/(30 Ω) = 1/3 A
__
(e) Power can be computed several ways. Here, it may be easiest to use ...
P = VI
For R1, that is P1 = (10 v)(1 A) = 10 W
For R2-R4, that is P2-P4 = (10 v)(1/3 A) = 10/3 W = 3 1/3 W
__
(f) The total power dissipated is the total power supplied:
P = VI = (20 v)(1 A) = 20 W
Adding up the power in the resistors, we get ...
P = 10 W + 3·(10/3 W) = 20 W
Connect wires to make the correct logic outputs.
Outputs needed: ~(B&C), A.
(Assignment: NAND Gates.
School Program: Acellus.
Class: Electronics & Coding.)
Answer:
Explanation:
im dum sorry bro i don't know it im in 6 grade
All of the following are examples of capital intensive industries EXCEPT: *
1 point
Soft drink production
oil extraction
manufacturing
hospitality
Answer:
hospital
Explanation:
Soft drink production is a capital intensive industry as it's depends upon the economy and trade.Oil extraction is a national industry and it also involves the intention of trade.Manufacturing is similar to soft drink production and has intense of trade.Hospital doesn't has the intention of trade so it's the answerHow do robots demonstrate the modern, technological Japan? *
Robots demonstrate modern, technological Japan because it serves as brought economical success to Japan since it help them to build products faster and efficiently.
According to the question, we are to discuss how the robot help japan in terms of technology and modernization.As a result of this we can see that Japan is moving forward in technology with development of robot because it makes them to build more products.
Therefore, Robot has brought economical success to Japan
Learn more about robot at:
https://brainly.com/question/10387419
Many amateur video games suffer from what kind of layout?
A. an overly neutral layout
B. an overly simplistic layout
C. an over-crowded layout
D. a boring layout
Answer:
D a boring layout I think but you welcome
WHICH LUBRICATION SYSTEM RECEIVES OIL FROM THE OIL SUPPLY TANK, PRESSURIZES THE OIL, SENDS THE OIL THROUGH THE FILTER AND DELIVERS THE OIL TO THE BEARINGS
Answer:
The following is the answer.
Explanation:
PRESSURE SYSTEM.
Gasoline has a comparatively high Btu per gallon rating of around
Select one:
O a. 1 lb: 2°F
O b. 5,000 Btu
O c. 12,000 Btu
O d. 14.000 Btu
Answer:
A
Explanation:
Gasoline has a comparatively high Btu per gallon rating of around 1 lb: 2°F. GGE enables customers to contrast the energy value of competing fuels with gasoline, a widely used fuel. Thus, option A is correct.
The term "gasoline gallon equivalent" (GGE) or "gasoline-equivalent gallon" (GEG) refers to the volume of an alternative fuel needed to produce one liquid gallon of gasoline's equivalent amount of energy.
If fuels are offered in various quantities and in various physical forms, it is challenging to compare the price of gasoline with other fuels. GGE tries to address this. The energy content of one gallon of gasoline is exactly equal to that of one GGE of CNG and one GGE of electricity. GGE does this by directly contrasting gasoline with other alternative fuels, such as those offered as gas (natural gas, propane, and hydrogen) and as metered electricity.
Therefore, option A is the ideal selection.
Learn more about the gasoline gallon equivalent" (GGE) here:
https://brainly.com/question/31491497
#SPJ5
How much current is drawn by a flashlight that has a resistance of 10 ohms if a voltage of 3 volts is impressed across it?
Answer:
0.3 amps
Explanation:
amps can be found using the equation
current=volts/resistance
so current=3V/10Ohms=0.3 amps
What is the voltage across the load, RL, in
this voltage divider network?
10.25 V
4.55 V
5.71 V
11.50 V
Answer:
(c) 5.71 V
Explanation:
The circuit can be redrawn to a Thevenin equivalent that is 6V through a 5-ohm resistor into a 100-ohm load. Then the voltage at the load is ...
(6 V)(100/(100 +5) ≈ 5.71 V
1. Write an equation that shows the equivalency between meters and Gigameters.
A technician notes that an operating air-conditioning system has ice formed on the suction line at the condensing unit. The technician can reasonably assume that:
The technician can reasonably assume that evaporator coil is frozen over.
An air-conditioning system makes a place cooler by absorbing heat from the
surrounding. This is usually done with the aid of the evaporator coil.
In situations whereby there are ice particles formed on the suction line at the
condensing unit then it means the air conditioning system is faulty and must
be turned off to prevent damage to other parts.
Read more about Air conditioning system here https://brainly.com/question/24920322