our assumption that x > 0 and y < 0 leads to a contradiction, and we can conclude that x · y < 2 for all real numbers x and y such that x > 0 and y < 0.
Why is it?
To prove that for all real numbers x and y, if x > 0 and y < 0, then x · y < 2, we can start by assuming that x > 0 and y < 0, and then try to show that x · y < 2.
Since y < 0, we can write y as -|y|. Thus, we have:
x · y = x · (-|y|)
Now, we know that |y| > 0, so we can say that |y| = -y. Substituting this into the above equation, we get:
x · y = x · (-y)
Multiplying both sides by -1, we get:
-x · y = x · y
Adding x · y to both sides, we get:
0 < 2 · x · y
Dividing both sides by 2 · x, we get:
0 < y
But we know that y < 0, which means that this inequality is not true. Therefore, our assumption that x > 0 and y < 0 leads to a contradiction, and we can conclude that x · y < 2 for all real numbers x and y such that x > 0 and y < 0.
To know more about Real numbers related question visit:
https://brainly.com/question/10547079
#SPJ1
find the output voltage when ω=ωc .suppose that vo(t)=acos(ωt ϕ)v , where a>0 and −180∘<ϕ≤180∘ . determine the values of a , ω , and ϕ .
ωc = 1/RC. where R is the resistance of the circuit and C is the capacitance. Once we know ωc, we can substitute it into the equation for vo(t) and evaluate the expression.
When ω=ωc, the output voltage can be found by substituting ωc for ω in the equation for vo(t):
vo(t) = a*cos(ωc*t + ϕ)v
The values of a, ω, and ϕ are given in the problem:
a > 0
-180∘ < ϕ ≤ 180∘
ω = angular frequency of the input signal
So, to find the output voltage when ω=ωc, we need to know the value of ωc. This value depends on the circuit parameters and can be calculated using the formula:
ωc = 1/RC
Without more information about the circuit, we cannot provide a specific answer for the output voltage when ω=ωc.
Learn more about voltage here: brainly.com/question/29445057
#SPJ11
A skating ramp is in shape of a rectangle and has an area of 36 square untied the length of the rectangle is one more than two times the width find the dimensions of the skating ramp
Answer: The dimensions of the skating ramp is 324.
Step-by-step explanation: I know people don't like long Answers so I will give you a long one :). The text says "A skating ramp is in shape of a rectangle and has an area of 36 square untied the length of the rectangle is one more than two times". If the ramp is a rectangle then they must have done (9x4=36). But it needs the be triple that so, 9+9+9=27 and 4+4+4=12. Which means 27x12=324 would be the answer.
:)
40 out of 240 students earned straight As on their report card. What percentage earned straight
As?
Answer:
16.67%
Step-by-step explanation:
[tex]\frac{40}{240}[/tex] × 100 = 16.67%
Consider F and C below.
F(x, y, z) = yz i + xz j + (xy + 6z) k
C is the line segment from (3, 0, −1) to (5, 6, 3)
(a) Find a function f such that F = ∇f.
(b) Use part (a) to evaluate integral of ∇f · dr along the given curve C.
The function f(x, y, z) that satisfies F = ∇f is f(x, y, z) = xyz + 3xz + 3yz² + 6zk + C, where C is a constant. The integral of ∇f · dr along C is given by:
∫∇f · dr = f(x2, y2, z2) - f(x1, y1, z1) = f(5, 6, 3) - f(3, 0, -1).
To find the function f(x, y, z) such that F = ∇f, we need to determine the gradient of f and equate it to F.
Gradient of f = ∇f = (∂f/∂x)i + (∂f/∂y)j + (∂f/∂z)k
Comparing the components of ∇f with F:
∂f/∂x = yz (1)
∂f/∂y = xz (2)
∂f/∂z = xy + 6z (3)
To solve for f, we integrate each of the partial derivatives with respect to their respective variables.
From equation (1), integrating with respect to x:
f(x, y, z) = xyz + g(y, z), where g(y, z) is a function of y and z.
Taking the partial derivative of f(x, y, z) with respect to y and comparing with equation (2):
∂f/∂y = xz + (∂g/∂y) = xz
∂g/∂y = 0
Integrating g(y, z) with respect to y:
g(y, z) = yz² + h(z), where h(z) is a function of z.
Taking the partial derivative of f(x, y, z) with respect to z and comparing with equation (3):
∂f/∂z = xy + 6z + (∂h/∂z) = xy + 6z
∂h/∂z = 0
Integrating h(z) with respect to z:
h(z) = 6zk + C, where C is a constant.
Substituting the expressions for g(y, z) and h(z) back into f(x, y, z):
f(x, y, z) = xyz + 3xz + 3yz² + 6zk + C
Therefore, the function f(x, y, z) that satisfies F = ∇f is f(x, y, z) = xyz + 3xz + 3yz² + 6zk + C, where C is a constant.
To evaluate the integral of ∇f · dr along the given curve C, we substitute the coordinates of the two endpoints of C into f(x, y, z) and calculate the difference.
Coordinates of the starting point of C: (x1, y1, z1) = (3, 0, -1)
Coordinates of the ending point of C: (x2, y2, z2) = (5, 6, 3)
Substituting the coordinates into f(x, y, z):
f(x1, y1, z1) = f(3, 0, -1)
f(x2, y2, z2) = f(5, 6, 3)
The integral of ∇f · dr along C is given by:
∫∇f · dr = f(x2, y2, z2) - f(x1, y1, z1) = f(5, 6, 3) - f(3, 0, -1)
To learn more about integral here:
brainly.com/question/18125359#
#SPJ11
find the determinant of the linear transformation t(f)=2f 3f' from p2 to p2
The determinant of the linear transformation t(f)=2f 3f' from p2 to p2 is 36.
To find the determinant of the linear transformation t(f)=2f 3f' from p2 to p2, we first need to represent the transformation as a matrix.
Let's start by choosing a basis for p2, say {1,x,x²}. Then, the linear transformation t can be represented by the matrix
[2 0 0]
[0 3 0]
[0 0 6]
To find the determinant of this matrix (and hence the determinant of the linear transformation), we can use the formula for the determinant of a 3x3 matrix:
det(A) = a11(a22a33 - a23a32) - a12(a21a33 - a23a31) + a13(a21a32 - a22a31)
Plugging in the entries of our matrix, we get:
det(t) = 2(3×6 - 0×0) - 0(2×6 - 0×0) + 0(2×0 - 3×0)
= 36
Therefore, the determinant of the linear transformation t(f)=2f 3f' from p2 to p2 is 36.
To learn more about linear transformation here:
brainly.com/question/30514241#
#SPJ11
Mitchell and Jane are going to race their racing cars around an oval track. Mitchell takes 25 minutes to complete a lap and Jane takes 30 minutes to complete a lap. How long will it take Mitchell to lap Jane's car (that is, to overtake her car) if they start together at the same point?
It will take 150 minutes for Mitchell to lap Jane's car, if they start together at same point.
What is displacement?Displacement refers to the distance and direction of an object's change in position from its starting point to its final position. It has both magnitude and direction because it is a vector quantity.
Displacement is different from distance, which refers to the total path covered by an object, regardless of its starting and ending positions.
Mitchell completes a lap in 25 minutes, which means that he completes 1/25th of the lap in one minute. Similarly, Jane completes 1/30th of the lap in one minute.
Let's assume that they start together at the same point and that Mitchell overtakes Jane after t minutes.
During this time t, Mitchell would have completed t/25th of the lap and Jane would have completed t/30th of the lap. We know that Mitchell overtakes Jane when he completes one full lap more than Jane.
Therefore, we can set up an equation:
t/25 - t/30 = 1
Simplifying this equation, we get:
6t/150 - 5t/150 = 1
t/150 = 1
t = 150
To know more about Displacement, visit:
https://brainly.com/question/30087445
#SPJ1
Jenny is in charge of ordering T-shirts for the math club at her school. If she paid $176 for 22 T-shirts, which of the following statements is true?
Jenny paid $176 for 22 T-shirts, which is $8 per T-shirt .
What is unitary method?The unitary method, commonly referred to as the unit rate or the single quantity method, is a mathematical approach for resolving issues requiring proportional connections between numbers. Finding the value of one unit of a quantity, which is frequently used as a reference or a benchmark, and utilising that value to compute or compare other numbers are both involved in this process.
In other words, you may compute the value or rate of one unit of a quantity using the unitary technique, and then use that rate to derive the value or rate of another quantity. This approach is frequently employed in a variety of real-world contexts, including the computation of costs, rates, ratios, and proportions.
Given:
Jenny paid $176 for 22 T-shirts.
To find the cost per T-shirt, we need to divide the total cost by the number of T-shirts.
Using Unitary method;
$176 ÷ 22 = $8 per T-shirt.
Therefore, D is correct statement: Jenny paid $176 for 22 T-shirts, which is $8 per T-shirt .
Learn more about Unitary method here:
https://brainly.com/question/22056199
#SPJ1
Correct Question:
Jenny is in charge of ordering T-shirts for the math club at her school. If she paid $176 for 22 T-shirts, which of the following statements is true?
A. Jenny paid $176 for 22 T-shirts, which is $20 per T-shirt.
B. Jenny paid $176 for 22 T-shirts, which is $11 per T-shirt.
C. Jenny paid $176 for 22 T-shirts, which is $12 per T-shirt.
D. Jenny paid$176 for 22 T-shirts, which is $8 per T-shirt.
if a triongle is 7/8 feet high and its base is 2/3 feet long, what is is area?
Answer:
7/24
Step-by-step explanation:
A = 7/8 × 2/3 × 1/2 = 14/48 = 7/24
(co 4) a company manufacturers soda cans with a diameter of 52 millimeters. in a sample of 18 cans, the standard deviation was 2.3 millimeters. what would be the 96onfidence interval for these cans?
The 96% confidence interval for the soda cans' diameters manufactured by CO 4 is approximately 51.1 mm to 52.9 mm.
To calculate the 96% confidence interval for the soda cans' diameters, we need to consider the sample mean, standard deviation, and sample size, as well as the appropriate Z-score for the desired level of confidence.
The terms you've provided are:
- Company (CO 4) - A company that manufactures soda cans.
- Diameter of 52 mm - The average diameter of the soda cans.
- Sample size of 18 - The number of soda cans in the sample.
- Standard deviation of 2.3 mm - The measure of dispersion in the sample.
Given the information, we first need to calculate the standard error (SE), which is the standard deviation (2.3 mm) divided by the square root of the sample size (18). This can be calculated as follows:
SE = 2.3 / √18 ≈ 0.54
For a 96% confidence interval, we use a Z-score of 2.05, which means we are 96% confident that the true population means lies within this interval. Now, we can calculate the confidence interval:
Lower limit = Sample mean - (Z-score × SE) = 52 - (2.05 × 0.54) ≈ 51.1 mm
Upper limit = Sample mean + (Z-score × SE) = 52 + (2.05 × 0.54) ≈ 52.9 mm
So, the 96% confidence interval for the soda cans' diameters manufactured by CO 4 is approximately 51.1 mm to 52.9 mm. This means we are 96% confident that the true average diameter of the soda cans produced by the company lies within this range.
Know more about Z-score here:
https://brainly.com/question/25638875
#SPJ11
Suppose that x and y vary inversely, and x=12 when y=5. Write the function that models the inverse variation.
The statement is expressed as:
[tex]y \alpha 1/x[/tex]
To convert to an equation introduce k, the constant of variation.
[tex]y=k * 1/x\\[/tex]
To find k use the condition that [tex]x = 12[/tex] when [tex]y = 5[/tex]
[tex]y=k/x[/tex]
[tex]5=k/12[/tex]
[tex]k=5*12[/tex]
[tex]k=60\\[/tex]
Therefore, [tex]y =60/x[/tex] is the function.
To learn more about the constant of variation,
brainly.com/question/14254277
suppose x1,...,xn are i.i.d. random variables from the uniform distribution on the interval [0,theta], an unbiased estimator of theta?
The required answer is = (n/(n+1))theta
theta = (n/(n+1))theta the sample maximum is an unbiased estimator of theta.
One unbiased estimator of theta is the sample maximum, which is defined as max(x1,...,xn). To show that this estimator is unbiased, we need to calculate its expected value and show that it equals theta.
Since x1,...,xn are i.i.d. random variables from the uniform distribution on the interval [0,theta], their probability density function is f(x) = 1/theta for 0 <= x <= theta and 0 otherwise.
The probability that the sample maximum is less than or equal to a given value x is the probability that all n samples are less than or equal to x. Since the samples are i.i.d., this probability is (x/theta)^n.
Therefore, the cumulative distribution function of the sample maximum is F(x) = (x/theta)^n for 0 <= x <= theta and 0 otherwise.
The probability density function of the sample maximum is the derivative of its cumulative distribution function, which is f(x) = (n/theta)(x/theta)^(n-1) for 0 <= x <= theta and 0 otherwise.
The expected value of the sample maximum is the integral of x times its probability density function from 0 to theta, which is
E[max(x1,...,xn)] = integral from 0 to theta of x*(n/theta)(x/theta)^(n-1) dx
= (n/theta) integral from 0 to theta of x^n/theta^n dx
= (n/theta) * [x^(n+1)/(n+1)theta^n)]_0^theta
= (n/(n+1))theta
Therefore, the sample maximum is an unbiased estimator of theta.
To find an unbiased estimator of theta, given that x1, ..., xn are i.i.d. random variables from the uniform distribution on the interval [0, theta], follow these steps:
1. Determine the sample maximum: Since the data is from a uniform distribution, the sample maximum (M) can be used as a starting point. M = max(x1, ..., xn).
2. Calculate the expected value of M: The expected value of the sample maximum, E(M), is given by the formula E(M) = n * theta / (n + 1).
3. Find an unbiased estimator: To find an unbiased estimator of theta, we need to adjust the expected value of M so that it equals theta. We can do this by solving for theta in the equation E(M) = theta:
theta = (n + 1) * E(M) / n
4. Replace E(M) with the sample maximum M: Since we are using the sample maximum as our estimator, we can replace E(M) with M in the equation:
theta_hat = (n + 1) * M / n
The unbiased estimator of theta is theta h at = (n + 1) * M / n, where M is the sample maximum and n is the number of i.d. random variables.
To know more about unbiased estimator . Click on the link.
https://brainly.com/question/14368422
#SPJ11
When does population increase the fastest for the Gompertz equation :P′(t)=0.7ln(P(t)(4500)/P(t))?P=Round to the nearest whole number.
The population increases the fastest when the population is half of the carrying capacity, which is 2250.
The Gompertz equation is a mathematical model used to describe population growth. It takes into account the carrying capacity of the environment, which is the maximum number of individuals that can be sustained by the available resources. The equation is P′(t)=0.7ln(P(t)(4500)/P(t)), where P(t) is the population at time t, and P′(t) is the rate of change of population at time t.
To find when the population increases the fastest, we need to find the value of P that maximizes P′(t). Taking the derivative of P′(t) concerning P and setting it to zero, we get P=4500/e. This means that the population increases the fastest when P=2250, which is half of the carrying capacity.
Intuitively, this makes sense because when the population is small, fewer individuals are competing for resources, which leads to faster growth. As the population approaches the carrying capacity, resources become scarce, which slows down the growth rate. Therefore, the population grows the fastest when it is halfway between the initial population and the carrying capacity.
To learn more about the Gompertz equation, visit:
https://brainly.com/question/18175560
#SPJ11
The first four nonzero terms in the power series expansion of the function f(x) = sinx about x = 0 are Select the correct answer. a. 1-x+x^2/ 2-x^3 /3 b.1-x^2/ 2+x^4/ 24-x^6/ 720 c. x + x^3 + x^5 + x^7d. x - x^3/ 6+x^5 /120-x^7/5040 e. 1 +x^2 / 2 +x^4 / 4 +x^6 / 6
The power series expansion of the function f(x) = sinx. The correct answer is (b) 1-x^2/2 +x^4/24 -x^6/720.
To obtain this answer, we can use the power series expansion formula for sinx, which is given by
sinx = x - x^3/3! + x^5/5! - x^7/7! + ... .
Evaluating the first four terms of this expansion around x=0, we get
sinx = x - x^3/3! + x^5/5! - x^7/7! + ...
= x - (x^3/6) + (x^5/120) - (x^7/5040) + ...
= 1-x^2/2 +x^4/24 -x^6/720 + ...,
which is equivalent to option (b).
Therefore, the first four nonzero terms in the power series expansion of f(x) = sinx about x=0 are 1-x^2/2 +x^4/24 -x^6/720. The correct option is B).
To know more about power series expansion:
https://brainly.com/question/30262936
#SPJ4
find the exact sum of the infinite geometric series. if the series diverges, enter diverges. [infinity] 1 5 k k = 2
The exact sum of the infinite geometric series [infinity] 1 5 k k = 2 is 2 and the exact sum of the infinite geometric series does not exist, and the answer is "diverges."
To find the sum of an infinite geometric series, we use the formula:
Sum = a / (1 - r)
where a is the first term and r is the common ratio.
In this case, a = 1 and r = 5/2 (since each term is 5/2 times the previous term).
Thus, the sum of the infinite geometric series is:
Sum = 1 / (1 - 5/2) = 1 / (1/2) = 2
Therefore, the exact sum of the infinite geometric series [infinity] 1 5 k k = 2 is 2.
To find the exact sum of an infinite geometric series, we need to determine if it converges or diverges. In this case, the series is given by:
Σ (5^k), where k starts at 2 and goes to infinity.
To determine if the series converges or diverges, we must find the common ratio. The common ratio (r) in this series is 5. For an infinite geometric series to converge, the absolute value of the common ratio must be less than 1 (i.e., |r| < 1).
Since the absolute value of the common ratio in this series is greater than 1 (|5| > 1), the series diverges. Therefore, the exact sum of the infinite geometric series does not exist, and the answer is "diverges."
To learn more about infinite geometric series, click here:
brainly.com/question/23602882
#SPJ11
An isosceles triangle has three angles: x, x, and y
x + x + y = 180°
y = -2x + 180°
If x and y were equal, the triangle would be equilateral. How does your graph show this?
{0} u {1/n | nez } is this an open set
In conclusion, the set {0} ∪ {1/n | n∈ℤ} is not an open set.
Explanation:
You are asking whether the set {0} ∪ {1/n | n∈ℤ} is an open set.
Step 1: Define the set
First, let's define the set in question. The set can be written as {0} ∪ {1/n | n∈ℤ, n≠0}, which means the union of two sets: {0} and {1/n | n∈ℤ, n≠0}. The second set contains all the elements of the form 1/n, where n is an integer, and n is not equal to 0.
Step 2: Determine if the set is open
An open set is a set in which for every point x, there exists some ε > 0 such that the open interval (x-ε, x+ε) is entirely contained within the set. Now, let's see if our set meets this criterion.
For any non-zero integer n, the point 1/n is in the set. However, there is no ε > 0 such that the open interval (1/n - ε, 1/n + ε) is entirely contained within the set, since the interval will contain points that are not of the form 1/n. This means that the set is not open, as there is no suitable ε for these points.
Since {0} is a singleton set and singleton sets are always closed, and {1/n | n∈ℤ} is a set of real numbers, the union "{0} u {1/n | n∈ℤ}" is not an open set. This is because it contains points on the boundary (0) as well as points that are not interior points (such as 1 and -1) due to the nature of the set {1/n | n belongs to z}.
In conclusion, the set {0} ∪ {1/n | n∈ℤ} is not an open set.
Know more about the open set click here:
https://brainly.com/question/31480826
#SPJ11
So basically it just pick the right selection.
Hope you guys help me with it •DUE ON APRIL 11•
If the first equation is 3x + 2y = 5, a second equation that would make this system have no solution is: A. 6x + 4y = 10.
If the first equation is y = 2x - 5, a second equation that would make this system have no solution is: A. 4x - 2y = 10.
The statement that correctly describes the solution to this system of equations is: A. there is no solution.
The statement that correctly describes the solution to this system of equations is: A. there is no solution.
The statement that correctly interprets Xaysha's solution is: C. there is no solution since 5 = 7 is a false statement.
The statement that correctly interprets Sophina's solution is: A. the solution is x = 0.
What is no solution?In Mathematics, no solution is sometimes referred to as zero solution, and an equation is said to have no solution when the left hand side and right hand side of the equation are not the same or equal.
This ultimately implies that, a system of equations would have no solution when the line representing each of the equations are parallel lines and have the same slope or coincide i.e both sides of the equal sign are the same and the variables cancel out.
For Sophina's solution, we have;
7x = 6x
7x - 6x = 0
x(7 - 6) = 0
x = 0
Read more on equation and no solution here: brainly.com/question/4110837
#SPJ1
Suppose the production function is Cobb-Douglas f(x1, x2) = x1^1/2*x2^3/2.
a. Write the expression for the marginal product of x1 at the point (x1,x2).
b. Does the marginal product of x1 increase for small increases in x1, holding x2 fixed? Explain.
c. How does an increase in the amount of x2 change the marginal product of x1?
d. What is the marginal rate of technical substitution between x2 and x1?
The marginal rate of technical substitution between x2 and x1 is -1/3.
a. The expression for the marginal product of x1 at the point (x1, x2) is derived by taking the partial derivative of the production function f(x1, x2) with respect to x1:
MP_x1 = ∂(x1^1/2 * x2^3/2) / ∂x1 = (1/2) * x1^(-1/2) * x2^(3/2)
b. The marginal product of x1 does not increase for small increases in x1, holding x2 fixed. This is because the exponent of x1 in the marginal product expression is negative (-1/2), which means that as x1 increases, the marginal product of x1 will decrease.
c. An increase in the amount of x2 will increase the marginal product of x1. This can be observed in the marginal product expression for x1: as x2 increases (given x2^(3/2)), the value of MP_x1 will also increase.
d. The marginal rate of technical substitution (MRTS) between x2 and x1 is the ratio of the marginal product of x1 to the marginal product of x2:
First, calculate the marginal product of x2:
MP_ x2= ∂(x1^1/2 * x2^3/2) / ∂x2 = x1^(1/2) * (3/2) * x2^(1/2)
Then, calculate the MRTS:
MRTS = - (MP_x1 / MP_x2) = - [(1/2) * x1^(-1/2) * x2^(3/2)] / [x1^(1/2) * (3/2) * x2^(1/2)] = - (1/3)
Therefore ,the marginal rate of technical substitution between x2 and x1 is -1/3.
To know more about marginal rate refer here:
https://brainly.com/question/30777627
#SPJ11
Sketch the region in the plane consisting of points whose polar coordinates satisfy the given conditions.
0 ≤ r < 7, π ≤ θ ≤ 3π/2
The region in the plane consists of all points with polar coordinates (r,θ) such that 0 ≤ r < 7 and π ≤ θ ≤ 3π/2 is the shaded region in the fourth quadrant bounded by the circle with radius 7 and the positive x-axis extended to the origin.
In polar coordinates, a point in the plane is represented by its distance from the origin (r) and the angle it makes with the positive x-axis (θ). The given conditions are 0 ≤ r < 7 and π ≤ θ ≤ 3π/2.
The condition 0 ≤ r < 7 means that the points must be inside the circle of radius 7 centered at the origin. The condition π ≤ θ ≤ 3π/2 means that the points must be in the fourth quadrant and lie between the angles π and 3π/2 measured from the positive x-axis.
Therefore, the shaded region in the fourth quadrant bounded by the circle with radius 7 and the positive x-axis extended to the origin is the region in the plane consisting of all points with polar coordinates (r,θ) such that 0 ≤ r < 7 and π ≤ θ ≤ 3π/2.
To learn more about polar coordinates, here
https://brainly.com/question/11657509
#SPJ4
Assume that the sequence defined by
a1 = 3 an + 1= 6 - (8/an)
is increasing and an < 6 for all n. Determine whether the sequence converges or diverges. If it converges, find the limit. (If an answer does not exist, enter DNE.)
Using the squeeze theorem, we can conclude that the sequence an must also converge to 6 as n approaches infinity. Therefore, the limit of the sequence is 6.
Assuming that the sequence defined by an is increasing and an < 6 for all n, we can determine whether the sequence converges or diverges. In this case, we know that the sequence is bounded above by 6, since an < 6 for all n. Therefore, the sequence is bounded and increasing, which means that it must converge to a limit.To find the limit of the sequence, we can use the Monotone Convergence Theorem. This theorem states that if a sequence is monotonic and bounded, then it must converge to a limit. In this case, we know that the sequence is increasing and bounded above by 6. Therefore, the sequence must converge to a limit.To find the limit of the sequence, we can use the squeeze theorem. The squeeze theorem states that if a sequence is bounded between two other sequences that converge to the same limit, then the sequence must also converge to that limit. In this case, we can use the sequence 6 - 1/n as a lower bound for an. This sequence converges to 6 as n approaches infinity. Therefore, we can say that 6 - 1/n < an < 6 for all n.Using the squeeze theorem, we can conclude that the sequence an must also converge to 6 as n approaches infinity. Therefore, the limit of the sequence is 6.For more such question on squeeze theorem
https://brainly.com/question/30277782
#SPJ11
Which of the following impulse responses correspond(s) to stable LTI systems (a) hi(t) = e-(1-2)u(t) (b) hy(t) = cos(2t)u(t) (c) h(t) = 8(-21)
The impulse response (b) hy(t) = cos(2t)u(t) corresponds to a stable LTI system. Option b is correct.
An LTI (Linear Time-Invariant) system is stable if and only if its impulse response h(t) is absolutely integrable, i.e., the integral of the absolute value of the impulse response over all time is finite:
∫|-∞ to ∞| |h(t)| dt < ∞For impulse response (a), hi(t) = e^-(1-2)t u(t), we can compute the integral of its absolute value:
∫|-∞ to ∞| |hi(t)| dt = ∫[0 to ∞] e^-(1-2)t dt = 1Since the integral is finite, this impulse response corresponds to a stable LTI system. For impulse response (c), h(t) = 8δ(-21), where δ(t) is the Dirac delta function, the integral of the absolute value is:
∫|-∞ to ∞| |h(t)| dt = |8| = 8Since the integral is finite, this impulse response also corresponds to a stable LTI system. For impulse response (b), hy(t) = cos(2t)u(t), we can compute the integral of its absolute value:
∫|-∞ to ∞| |hy(t)| dt = ∫[0 to ∞] |cos(2t)| dt = ∞Since the integral is infinite, this impulse response does not correspond to a stable LTI system. Hence Option b is correct.
To learn more about LTI (Linear Time-Invariant) system, here
https://brainly.com/question/15240548
#SPJ4
Find x and round to the nearest 100th
(Try to show every step with as less words as possible, keep it simple if you can pleasee)
If A=-3, B=-2, C=2, then find the value of each of the following:
(A) ab+9/C
Answer:
(A)=9
Step-by-step explanation:
ab+9/c
-3×-2 + 9/2
(-×-=+)
6+3
(A)=9
Given that Y1=2.3, Y2=1.9, and Y3=4.6 is a random sample from fY(y;theta)=y^3e^-y/theta / 6theta^4, with y>0. Calculate the maximum likelihood estimate
The maximum likelihood estimate of θ is 0.8.
The likelihood function for the sample is:
L(θ) = fY(2.3;θ) x fY(1.9;θ) x fY(4.6;θ)
= (2.3 e^(-2.3/theta) / (6 θ theta)) (1.9e^(-1.9/theta) / (6 theta)) (4.6 e^(-4.6/theta) / (6 theta))
Taking the natural logarithm of both sides, we get:
ln(L(θ)) = ln(2.3) - (2.3/θ) - 3ln(θ) - ln(6) + ln(1.9) - (1.9/θ) - 3ln(θ) - ln(6) + ln(4.6) - (4.6/θ) - 3ln(θ) - ln(6) = 3ln(2.3) - (2.3/θ) - 3ln(θ) - ln(6) + 3ln(1.9) - (1.9/θ) - 3ln(θ) - ln(6) + 3ln(4.6) - (4.6/θ) - 3ln(θ) - ln(6)
To find the maximum likelihood estimate of theta, we need to maximize this expression with respect to theta. We can do this by taking the derivative of the expression with respect to theta, setting it to zero, and solving for theta:
d/dθ ln(L(θ)) = (2.3/θ) - (3/θ) + (1.9/θ) - (3/θ) + (4.6/θ) - (3/θ) = 0 Simplifying this expression, we get:
= (2.3/θ) + (1.9/θ) + (4.6/θ)
= (9/theta)
Multiplying both sides by θ, we get:
2.3 + 1.9 + 4.6 = 9θ
Solving for θ , we get:
θ= (2.3 + 1.9 + 4.6) / 9 = 0.8
Therefore, the maximum likelihood estimate of θ is 0.8.
Learn more about the function visit:
https://brainly.com/question/11624077
#SPJ12
The probability is 0.10 that the machine currently in use for filling cereal boxes with HappyOs cereal will underfill a box. Which of the following statements is TRUE regarding boxes randomly sampled from the filling process? In a sample of 50 boxes, it would be impossible for all 50 boxes to be underfilled In a sample of 50 boxes, exactly 5 will be underfilled In a very large sample of boxes, you are certain to get at least one underfilled box O The proportion of underfilled boxes will get closer to 0.10 as the number of sampled boxes increases. 3. A popular game requires the player to select the same five numbers out of a set of allowed numbers that will be drawn at random by the lottery commission. For the next game if you select the five numbers that won in the most recent prior drawing, your chances of winning will increase because those five numbers must be lucky. be unaffected because every set of five numbers is equally likely on every attempt be unknown because it depends on how many times those five numbers have won in the last several drawings O decrease because the same five numbers are not likely to occur again so soon . Which of the following is TRUE about a probability model? A probability model is description of a random phenomenon in the language of mathematics. O A probability model assigns probability to all possible outcomes of a random phenomenon. All of the answers are correct. A probability model identifies all possible outcomes for a random phenomenon
The statement that is TRUE regarding boxes randomly sampled from the filling process is that in a very large sample of boxes, you are certain to get at least one underfilled box. This can be answered by the concept of Probability.
The probability of a box being underfilled is 0.10 or 10%. In a large sample of boxes, as the number of sampled boxes increases, the likelihood of encountering at least one underfilled box also increases. This is because the probability of at least one box being underfilled becomes virtually certain in a large sample size. As the sample size approaches infinity, the probability of encountering at least one underfilled box approaches 100%.
Therefore, in a very large sample of boxes, you are certain to get at least one underfilled box
To learn more about Probability here:
brainly.com/question/30034780#
#SPJ11
2 given the following valid joint discrete distribution, what is e(3x 2y)
The expected value of the function 3x + 2y, given a valid joint discrete distribution, can be calculated using the properties of expected values.
The expected value of a function of two discrete random variables x and y, denoted as E(3x + 2y), is the sum of the products of the possible values of x and y, weighted by their respective probabilities, in accordance with the joint distribution. Mathematically, it can be expressed as:
E(3x + 2y) = Σ[ (3x + 2y) × P(x, y) ]
where Σ denotes the sum over all possible values of x and y, and P(x, y) represents the joint probability of x and y.
To calculate the expected value, follow these steps:
Identify the possible values of x and y from the given joint discrete distribution.
Compute the joint probability P(x, y) for each combination of x and y using the provided distribution.
Multiply each value of x by 3, and each value of y by 2.
Multiply the result of step 3 by the corresponding joint probability P(x, y) from step 2.
Sum up all the products obtained in step 4 to get the final expected value.
Therefore, the expected value E(3x + 2y) can be found by performing the above steps and summing the resulting products, in accordance with the provided joint discrete distribution.
To learn more about discrete distribution here:
brainly.com/question/31197941#
#SPJ11
Determine whether the sequence converges or diverges. If it converges, find the limit.
an = (7n+2)/(8n)
The given sequence an = (7n+2)/(8n) converges, and its limit is 7/8
To determine whether the sequence converges or diverges, and to find the limit if it converges, we will analyze the given sequence an = (7n + 2) / (8n).
Step 1: Simplify the sequence by dividing the numerator and the denominator by the highest power of n, which in this case is n^1.
an = (7 + 2/n) / (8)
Step 2: Take the limit of the sequence as n approaches infinity.
lim (n -> ∞) [(7 + 2/n) / 8]
Step 3: As n approaches infinity, the term 2/n approaches 0.
lim (n -> ∞) [(7 + 0) / 8]
Step 4: Simplify the limit.
lim (n -> ∞) [7 / 8] = 7/8
Since the limit exists and is a finite value (7/8), we can conclude that the sequence converges, and its limit is 7/8.
Learn more about converges: https://brainly.com/question/31440916
#SPJ11
Puzzle
Three
Middle
Schoolers
High
Schoolers
Use the two way frequency table below to answer the
following questions. To break the code of puzzle three you will
need to substitute your answers into the code below and
solve. Be sure to follow the order of operations!
Middle and High School students were surveyed about which
of the following classes is their favorite elective.
Round answers to the nearest tenth (in percent form), but
do NOT round your final code answer**
Art
Technology
Total
46
107
245
schoolers?
Band
92
65
88
145
134
Total
157
252
543
A. Out of the people surveyed what percentage are middle
298
B. Out of the people surveyed what percentage are high schoolers?
C. How much greater is the percentage of high schoolers that prefer
technology than the percentage of middle schoolers that prefer
technology?
What percent of the people preferred...
D. Band
E. Art
F. Technology
Code: C (B+A)+D(F-E)
O Math in the Midwest 2020
The percentage of middle schoolers is given as 45.1%
A percentage is a fractional expression, written as parts of every one-hundred, represented by the sign "%".
For instance, assume there are 20 red balls in a bag that comprises of 100 balls – providing us an opportunity to ascertain that the portion of red balls available in the aforementioned sack is twenty percent.
If you wish to calculate a percentage of numbers, then you must first divide the part by the entirety and multiply the result with one hundred. As an example, if we want to calculate what amount of hundred is constituted by twenty, then we simply divide twenty by hundred which gives us 0.2, and then further imply multiplication of it by 100 which equals twenty percent.
Read more about percentage here:
https://brainly.com/question/24877689
#SPJ1
determine whether the sequence converges or diverges. if it converges, find the limit. (if an answer does not exist, enter dne.) an = n 42 3n lim n→[infinity] an =
The given sequence is an = n/(42+3n).
To determine whether it converges or diverges, we can use the limit comparison test. Taking the limit as n approaches infinity of the ratio of an and n, we get lim n→[infinity] an/n = lim n→[infinity] n/(n(42/ n+3)) = lim n→[infinity] 1/(42/ n+3) = 1/42.
Since the limit is a finite positive number, the sequence converges. To find the limit, we can use the fact that the sequence converges to the same limit as an = 1/(42/ n+3).
Taking the limit as n approaches infinity of 1/(42/ n+3), we get lim n→[infinity] 1/(42/ n+3) = 0. Therefore, the limit of the given sequence is 0.
To know more about limit comparison test click on below link:
https://brainly.com/question/22283016#
#SPJ11
Complet question:
determine whether the sequence converges or diverges. if it converges, find the limit. (if an answer does not exist, enter dne.) an = n/(42+3n) lim n→[infinity] an =
The given sequence is an = n/(42+3n).
To determine whether it converges or diverges, we can use the limit comparison test. Taking the limit as n approaches infinity of the ratio of an and n, we get lim n→[infinity] an/n = lim n→[infinity] n/(n(42/ n+3)) = lim n→[infinity] 1/(42/ n+3) = 1/42.
Since the limit is a finite positive number, the sequence converges. To find the limit, we can use the fact that the sequence converges to the same limit as an = 1/(42/ n+3).
Taking the limit as n approaches infinity of 1/(42/ n+3), we get lim n→[infinity] 1/(42/ n+3) = 0. Therefore, the limit of the given sequence is 0.
To know more about limit comparison test click on below link:
https://brainly.com/question/22283016#
#SPJ11
Complet question:
determine whether the sequence converges or diverges. if it converges, find the limit. (if an answer does not exist, enter dne.) an = n/(42+3n) lim n→[infinity] an =
Find area of the shaded region
The area of the shaded region is 7.63 m².
What is the area of the shaded region?The area of the shaded region is calculated as follows;
area of the shaded region = area of circle - area of quadrilateral
The diameter of the circle is calculated as follows;
d² = 3² + 4²
d² = 25
d = √ (25)
d = 5
The radius of the circle = 5/2 = 2.5 m
Area of the circle = πr² = π (2.5)² = 19.63 m²
Area of shaded region = 19.63 m² - (3 m x 4 m) = 7.63 m²
Learn more about area of shaded region here: https://brainly.com/question/14989383
#SPJ1