Answers
Answer:
1.) Aerospace
2.) construction
3.) Energy
Explanation:
the first on has to do with navigation systems which you would use on planes
The second has to do with the structure of a home which only construction builders would know if a house is in good condition or not
The third one has to do with Energy because he is measuring in meters for with and accuracy( also just because I know I'm right on the other ones so if that's the last one to answer than that's the answer >:3)
I'm a genius!!!
Related Questions
4. Set the height of the cutting tool tip
a. against the workplace.
b. at the center of the workpiece.
c. slightly above the center of the workpiece
d. slightly below the center the workplece.
Answers
Answer:
D
Explanation:
a buyer can purchase 70 screwdrivers ten 4-inch length twelve 6 inch length twenty 8-inch length are needed. how many heavy 24-inch screwdrivers can be bought to the obtain the total of 70 screwdrivers
Answers
Answer:
28 , 24-inch screwdrivers
Explanation:
The total number of screwdrivers that can be purchased is = 70
4 - inch length screwdrivers = 10
6- inch length screwdrivers = 12
8- inch length screwdrivers = 20
Total = 20 +12 +10 = 42
Remaining = 70-42 = 28
So, heavy 24-inch screwdrivers = 28
PLS HURRYY!!!
Look at the image below
Answers
Answer:
1.) Bachelor's degree in aerospace engineering
2.)High school diploma
3.)Bachelor's degree in physics
Explanation:
yeah had a hard time so I can't explain
It's hard knowing what training level they are in when that's not the career your focusing on so yeah
Start by setting aside money in your savings account for your goals and for emergencies. Then, fill in the other categories with your remaining money. Be sure to allocate all of your money, so you have $0 left.
Answers
I had saved 2000 $ from my monthly salary allowance for the last two weeks of the month.
I had planned to utilize this money for any emergency condition. Till the end of first week I was left with 500 $ out of 2000 $ because I took my dog for a routine check up as there were indication of serious tick infection. Lastly, I was left with 500 $ which I used for transportation and daily evening time snack expenditure. Till the end of last two weeks I was able to save 100 which I used to pay the monthly subscription of my digital cabal connection. So this way I was left with only $0.Learn more about money:
https://brainly.com/question/23020158
What is the primary source of electrical energy to the
vehicle while it is running?
CPU Power System
Battery System
Charging System
Starter System
Answers
Answer:
Explanation:
Its the "charging" system. It consists of an alternator (which is similar to an electric motor only in reverse. It is powered by a rubber belt which is connected to a pulley on thd engine. When the engine is running, it turns the belt which turns the pulley on the alternator.) Inside the alternator is a part called a regulator which controls thd voltage that is output to the battery.
Nick Bolger kept $1,200 on deposit for six months in a three-month money market account that pays simple interest. For the first 3 months, the account paid 2.5% annual interest. For the next 3 months, an annual interest rate of 2.15% was paid. What total interest did Nick earn for the six months?
Answers
Answer:
13.95
Explanation:
Given that :
Principal amount = 1200
Simple interest rate paid :
r = 2.5% ; period = first 3 months
r = 2.15% ; period = next 3 months
Simple interest (1st three months) :
Monthly rate = 2.5% / 12 = 0.0020833
2nd three month = 2.15% / 12 = 0.0017916
Interest = principal * rate * time
Interest (1st three months) = (principal * rate * time)
Interest = (1200 * 0.0020833 * 3)
= 7.49988
Interest = (2nd three months) = (principal * rate * time)
Interest = (1200 * 0.0017916 * 3)
= 13.12479 * 3)
= 6.44976
Total interest : ( 7.49988 + 6.44976)
= 13.94964
= 13.95
Two Technicians are discussing the Battery Council
International (BCI) battery group numbers. Technician A
says the group number designates the physical size of
the battery such as length, width, and height. Technician
B says the group number designates battery capacity.
Who is correct?
Technician A
Technician B
Both Technician A and Technician B
Neither Technician A nor Technician B
Answers
Answer:
Technician A
Explanation:
The Battery Council International (BCI) battery group numbers is an industry standard for batteries that indicate two important this;
Physical size of a car battery which are; height , width and length.Polarity on the battery which is the location of the positive and negative battery postsFor example : a group 24 battery or a type 27 marine battery are battery group numbers that define the physical dimensions of a battery case. These numbers are important because car owners and manufacturers use the numbers to match vehicle power requirements with the alternators .A mismatch of the battery and the alternator can cause the vehicle's alternator to overheat leading to a short life span.
Technician A statement is correct.
When you an angle you divide it into two equal part s
Answers
I don’t understand...
Answer:
Bisect
Explanation:
Select the correct answer from each drop-down menu.
James is a building contractor and needs to decide at what depth he should lay the foundation. What information will he require?
James would have to determine the ( materials to be used, number of workers available, load bearing capacity of the soil)
and the (design of the building, availability of machines,amount to be spent)
to decide at what depth he should lay the foundation.
Answers
Answer:
James would have to determine the LOAD BEARING CAPACITY OF THE SOIL and the DESINGH OF THE BUILDING to decide at what depth he should lay the foundation.
Explanation:
how does a healthy environment help in maintaining a healthy ans happy life
Answers
Answer:energy
Explanation:
It gives out positive energy which Resonates back to u
How does the start function make your programs easier to understand?
Answers
Explanation:
All of the commands you wish to execute must go inside of the start function, between the curly braces.
The mathematical study of two dimensional shapes in known as
Answers
Answer:
Geometry
Explanation:
Geometry is the mathematical study of size, shapes and planes. Part of geometry is the different dimensions as they are represented by axises. A two-dimensional figure is drawn on the x- and y-axises, and a three-dimensional figure is drawn on the x-, y-, and z-axises.
Hope this helped
Why is the face of the claw on a claw hammer usually a smooth curve? Why isn't it straight or some other shape?
Answers
Answer:
The face of the claw on the claw hammer is usually a smooth curve so as to improve the ease with which nails are removed when removing nails because as the nail held between the V shaped split claw is being pulled out from the wood, it slides more and more towards cheek, reducing the distance of the nail from the cheek which is the fulcrum, thereby increasing the mechanical advantage because the location of the hand on the grip remains unchanged
Explanation:
The design-bid-build model is prons to abuse because separation of phases facilitates the hiding of corrupt practices.
False
O True
Answers
Which qualities does an Interactive Media worker need when creating video conference or other multimedia projects for customers?
ability to keep secrets and information private
leadership and motivational skills
creativity for developing ideas and designs
knowledge of how to set up databases
Answers
Answer: I'm sorry I'm late but it really is C.) creativity for developing ideas and designs. And I hope that everyone is having a bless safe day and God and Jesus love you and so do I <3 !.
Creativity for developing ideas and designs qualities an Interactive Media worker need when creating video conference or other multimedia projects for customers. The correct option is C.
What is Interactive Media?Interactive media is a kind of communication where the user's inputs influence the program's outputs and the program's outputs are dependent on the user's inputs.
In a nutshell, it refers to the various ways that individuals gather, organise, and disseminate information.
Interactive media incorporate other information technologies such as telephone, television, digital (binary) data, memory storage, and computers.
Training program, video games, electronic encyclopaedias, and travel guides are some of their most popular uses.
When designing video conferences or other multimedia projects for clients, an interactive media professional needs creativity for coming up with concepts and designs.
Thus, the correct option is C.
For more details regarding interactive media, visit:
https://brainly.com/question/21333773
#SPJ6
Genetic engineers insert genes for desirable traits into a cell of an existing organism. What is the term for this process?
A.
transgenesis
B.
profiling
C.
fingerprinting
D.
cloning
Answers
Answer:
A. transgenesis
Explanation:
Transgenesis is the process of introducing a gene (referred to as a transgene) from one organism into the genome of another organism. The aim is that the resulting transgenic organism will express the gene and exhibit some new property or characteristic.