Answer:
Physicians and it is ethical because they promise to help
Explanation:
Balance the following equation:
C7H602 + 02 -- CO2 + H20
Answer:
Explanation:
2C7H6O2 + 15O2 → 14CO2 + 6H2O.
Which two conversion factors would be used to convert the quantity of 4500 seconds into hours.
Answer:
the answer is A
Explanation:
in 60 seconds there is 1 minute and in 60 minutes there is one hour
which of the following is a physical property of the salt crystals shown here?
A.they are gas
B.they cannot burn
c.they are a liquid
D. they are clear white
Answer:
As the explanation i think the answer is D
Explanation:
Transparent and colourless in crystalline form – rather like ice. Crystallises in the isometric system, usually in the form of cubes. Soluble in water (35.6g/100g at 0°C and 39.2g/100g at 100°). Slightly soluble in alcohol, but insoluble in concentrated hydrochloric acid.Physical properties: Sodium chloride is a white crystalline solid with a density of 2.16 g/mL, and a melting point of 801 °C. It is also available as aqueous solutions of different concentrations, called saline solutions. Chemical properties: Sodium chloride is readily soluble in water and other polar solvents.
Which characteristic do valence electrons indicate about reactions between atoms?
A.bond type
B.electronegativity difference
C.bond number
D.absolute electronegativity
Answer:
the answer is Bond Number
Explanation:
b r u h i just took the quiz and got the answer wrong lol
so turns out its BOND NUMBER
The whole Chemical Reaction Predictions Quick Check for Chemistry
1) chemical reaction
2) bond number
3) chemical bonds
4) C3H6O3
5) Iron oxides form when oxygen, a product of photosynthesis, is in the atmosphere
What is the frequency of red light with a wavelength of 645 nm?
Answer:
4.64E14
Explanation:
First convert 645 nm to m = 6.4500E-7m. The equation for finding v with these values is the speed of light/wavelength. so 2.998E8/6.4500E-7m.
so your v or frequency would equal 4.64E14
Fun fact you know this is visible light because the visible light range is within the E14 range.
Block A is made of copper, which has a specific heat value of 0.385 J/g*C.
Block B is made of aluminum, which has a specific heat value of 0.900
J/g*C. Both blocks have a mass of 100 grams. If you are trying to heat the
blocks to a temperature of 200 C, which block will need to absorb more
energy?
o Block A (copper) because it has a lower specific heat value.
o Block B (aluminum) because it has a higher specific heat value.
o Block A (copper) because it has a higher specific heat value.
o Block B (aluminum) because it has a lower specific heat value.
Block B will need to absorb more energy as it has higher specific heat value.
What is specific heat?Specific heat is defined as the amount of heat required to raise the temperature of one gram of a substance by one degree Celsius rise. Units of specific heat are calories or joules per gram per degree Celsius.
Specific heat capacity varies with temperature often and is different for each state of matter. While the substance which undergoes phase transition then it's specific heat is technically infinite.
Specific heat of a gas is significantly higher when it is allowed to expand as it is heated .It may also be referred to as a ratio between the specific heat capacities of two substances at a given temperature.It is calculated by the formula ,Q=mcT
For copper, it is 100×0.385×473=18210.5 J
For aluminium ,it is 100×0.90×473=42570 J
As the specific heat of aluminium is higher it will absorb more energy.
Learn more about specific heat ,here:
https://brainly.com/question/11297584
#SPJ2
Activity 32 can someone explain how u do this?.
Answer:
write a question and answer it with the words
Explanation:
Gloria/ the bank/ the car
A: where is Gloria going? To the bank, right?
B: Yes, she's going to the bank. She's going in a car.
pls help!!! A kitten has a mass of 1582 g and accelerates at 1.7 m/s^2. What is the net force acting upon the kitten?
Write down all the givens from the problem.
Are all of the units in the form required to use the generic equation? If not, then show your conversion.
Write the generic equation (equation with variables only) for this problem. Do not add any spaces between letters or symbols.
Substitute your numbers into the generic equation. This is where you show your math work, step by step. Solve the problem
Enter the numeric portion (numbers only) of your answer here rounded to the nearest tenth.
Enter the numeric portion (numbers only) of your answer here rounded to the nearest tenth.
Answer:
2689.4
Explanation:
19 What is the number of moles of nitrogen gas which react with 18 g of magnesium to form magnesium nitride compound ? [Mg = 24,N=14]
a) 0.25 mol 0 b) 0.5 mol C) 1 mol d) 2 mol
Answer:
0.5 mol of nitrogen gas.
Explanation:
18g of Magnesium in mol is equal to 18g/24 gmol-1 = 0.75 mol and 7g of nitrogen in mol is equal to 7g/14 gmol-1 = 0.5 mol,
Thus, When 18g of magnesium reacts with 7g of nitrogen it implies 0.75 mol of magnesium which reacts with 0.5 mol of nitrogen. :)
The number of moles of nitrogen gas which react with 18 g of magnesium
to form magnesium nitride compound is 0.5mol.
We need to find the number of mole for magnesium and nitrogen.
Mole= mass/molar mass
Magnesium= 18g/24gmol⁻¹ = 0.75mol of Mg
Nitrogen= 7g/14gmol⁻¹ = 0.5mol of N
This implies that when 18g of magnesium reacts with 7g of nitrogen it
means 0.75 mol of magnesium which reacts with 0.5 mol of nitrogen.
Read more on https://brainly.com/question/25169240
when a carbohydrate is attached to a phospholipid what is the structure called
Answer:
Glycolipid
Explanation:
These are called glycolipids.
Glyco comes from the carbohydrate, and is a word relating to sugars, which are a type of carbohydrate
Lipid is a fat/oil, and as you could have guessed, comes from the phospholipid.
Hope I helped! :)
A carbohydrate attached to a phospholipid is called a glycolipid.
What is a glycolipid?Glycolipids can be described as the complex type lipid containing carbohydrates, fatty acids, and glycerol groups. The glycosidic term is used for any molecule containing one or more monosaccharides bound by glycosidic linkage.
Glycolipids can be also called structural lipids, which are generally found in the extracellular face of the cell membranes. Different types of glycolipid are Cerebroside and ganglioside.
Glycolipids provide energy to cells and help to determine the blood group. The blood group types determine from the oligosaccharides attached to a particular glycolipid on the surface of blood cells.
It assists the immune system of the body by destroying the pathogens in the human body.
A phospholipid is a lipid that is attached to the phosphate group. When the carbohydrate molecules attached to the lipid are known as glycolipid. Glycolipid plays an important role on the cell to cell interaction and cell differentiation.
Learn more about glycolipid, here:
https://brainly.com/question/26458922
#SPJ5
A sample of an unknown solid is found to have a volume of 24.3 cm3 and a mass of
217.0 grams. What is the density of the unknown
Explanation:
Density = mass ÷ volume
= 217.0 g ÷ 24.3 cm³
= 8.93 g/cm³
∴ the unknown sample of mass 217.0 grams and volume of 24.3 cm³ has a density of 8.93 g/cm³.
Which of the following has the most thermal energy?
A full-size candy bar that is melting
A swimming pool on a sunny day
The entire atmosphere of the earth
1 gallon of boiling water
The one that has the most thermal energy out of the following is 1 gallon of boiling water.
Thermal energy is the energy generated by a material as a result of particle movement inside the material. Thermal energy causes things to have an internal temperature, which may be measured. The greater the temperature measured, the quicker the particles travel within the system.
The full-size candy bar that is melting melts at a slower particle rate compared to the 1 gallon of boiling water whose particles travel faster.
A swimming pool on a sunny day has average thermal energy. Also, the entire atmosphere of the earth may not experience the same amount of thermal energy from the sunlight.
Therefore, we can conclude that the most thermal energy out of the following is 1 gallon of boiling water.
Learn more about thermal energy here:
https://brainly.com/question/18989562?referrer=searchResults
An astronomer is describing an orbiting body she recently observed. Based on this description, determine which region of the solar system the body is most likely to reside in:
At its closest, the observed body was 2.4 AU from the Sun. At this point, we were able to determine that it was composed primarily of rock and metal, although we do not know exactly which metals it contains. Its orbit is not a perfect ellipse because it moves slightly every time Jupiter passes by.
asteroid belt
inner planets
outer planets
Kuiper Belt
Oort cloud
Answer:
Asteroid belt
Explanation:
Answer:
asteriod belt i think?
Explanation:
sorry if im wrong but Jupiter does pass pretty close to the asteroid belt
Brainliest?
if you answer this question right you get 100 points. What is my favorite color it is a 4 letter word and it ends with e
° °
∵ω∵
Answer:
Blue!!
I think it is blue!
is it blue cuz i think its blue
Suppose you identify a new element, Pivotium. Pivotium has two isotopes: Pivotium-426 and Pivotium-417. In the mixture, 11% of the mixture is Pivotium-426; the rest of the mixture is Pivotium-417. What is the relative atomic mass for Pivotium?
Answer:
Explanation:
Suppose you identify a new element, Pivotium. Pivotium has two isotopes: Pivotium-426 and Pivotium-417. In the mixture, 11% of the mixture is Pivotium-426; the rest of the mixture is Pivotium-417. What is the relative atomic mass for Pivotium?
Multiply the mass by the % written as a decimal and add the result.
426X0,11 + 417X 0.89 = 417.99 or 418
check 90% is. 417 only 10% 426
417X.9 +(426X0.10)=417.9
Someone pls help me I will make you brain
Which of the following sequences of elements would all have four valence electrons?
A.) B, Si, As, Te
B.) C, Si, Ge, Sn
C.) O, S, Se, Te
D.) Ga, Ge, As, Se
Answer:
Your answer should be B.) C, Si, Ge, Sn! I hope this helps you! :)
What will be the new pressure of a gas at 36.0 atm and 108 C if the temperature of the gas is increased to 441 C?
Answer
199 ATM
EXPLANATION
assume that the volume is constant. At higher temp the gas molecules move faster and the pressure goes up.
P=kT
CONVERT C TEMP TO K TEMP FOR GAS PROBLEMS!!!!!!
108C = 108 +273 = 381 K
441C = 441 + 273 = 714K
P=kT
108 =k x 381
K=108/381 = 0.279
AT THE HIGHER TEMP
P =0.279 X 714 =199ATM
Bohr models do not correctly show the location of electrons in an atom explain why they are still useful to predict bonding of atoms
Answer:
looo
rdyxvxkxkvxkgxkgdkvx
Explanation:
lolollkvvbffffkhdhlxkgzfjzufsfjsdhayzyrzruzruzufzktzkgdjfdufskdgjgzjfgkzjgskf
If greenhouse gases in the atmosphere act like a blanket around the Earth, how is this "blanket” being changed by human activities?
It is getting thinner and keeping the Earth cooler.
It is getting thicker and keeping the Earth cooler.
It is getting thicker and keeping the Earth warmer.
It is getting thinner and keeping the Earth warmer.
Answer:
It is getting thicker and keeping the Earth warmer.
Answer:
it is getting thinner and keeping the earth warmer
In a movable pulley system, where does the other effort come from?
Answer:
In a movable pulley system, where does the other effort come from? is carried by this end of the rope. This means that the structure (ceiling) does half the effort.
Explanation:
Someone pls help me I will make you you brain
Answer:
i have no clue
Explanation:
umm cause i have no clue sorry lol but good luck
A field of many different species of wildflowers would be considered a(n) _____________.
a
organism
b
population
c
community
d
ecosystem
e
biome
f
biosphere
Answer:
That would be a community.
Explanation:
A field of many different species of wildflowers is considered to be a community.
What is community in biological terms?It is called biological community meaning an interacting group of various species sharing a common location.Factors which determine overall structure of community are number of species, abundance of each species,interaction among the species and community's ability to return to normal after a natural calamity.
Change of communities over a period of time is called as ecological succession.Each species in a community has its own characteristic niche . The niche includes all the interactions of the species with other members of the community.An ecosystem comprises of biological community together with its physical environment.
Learn more about biological community,here:
https://brainly.com/question/17304846
#SPJ2
what is a substance called if it speeds up a chemical reaction?
Answer:
A catalyst
Catalysts speed up the rate of reaction without being changed or used up in the reaction.
Hope this helps!
Which choice lists the different types of change in order of increasing energy
a) chemical, nuclear, physical
b) chemical, physical, nuclear
c) physical, chemical, nuclear
d) nuclear, chemical, physical
Answer:
Your answer is D.
Explanation:
Answer:
I would answer D
Explanation:
I might be wrong though
hello
Describe the structure of solid potassium iodide.
Answer:
Potassium iodide is a metal-halide salt that has an ionic connection between the potassium cation (K+) and the iodide anion (I–). It is colorless to white and appears as cubical crystals, powder, or white granules. It has a salty, astringent flavor. This chemical is made from iodine and potassium hydroxide.
What is the molality of a solution containing 10.0 G of NA2 S04 and 1000.0 G of water
Explanation:
1 literThe total of water is equal to 1000.0 g of water
we need to find the molality of a solution containing 10.0 g of dissolved in Na₂S0₄1000.0 g of water
1. For that find the molar mass
Na: 2 x 22.99= 45.98
S: 32.07
O: 4 x 16= 64
The total molar mass is 142.05
We have to find the number of moles, y
To find the number of moles divide 10.0g by 142.05 g/mol.
So the number of moles is 0.0704 moles.
For the molarity, you need the number of moles divided by the volume. So, 0.0704 mol/1 L.
The molarity would end up being 0.0704 M
The molality of a solution containing 10.0 g of Na2SO4 dissolved in 1000.0 g of water is 0.0704 Mliter
I will make you brainless answer this 1 question pleaaeeee!b
Which is larger 1.45 or 1.2544 for density
Answer:
1.45 is larger for density
What is the law of conservation of mass and how does it relate to chemical equations?
What does it mean for a
chemical equation to be balanced?
Answer: Matter cannot be created or destroyed in chemical reactions.
Explanation: This is the law of conservation of mass. In every chemical reaction, the same mass of matter must end up in the products as started in the reactants. Balanced chemical equations show that mass is conserved in chemical reactions.