Part A

Determine the force in members CD of the truss, and state if the member is in tension or compression. Take P = 1570lb

FCD =

Part B

Determine the force in members HI of the truss, and state if the member is in tension or compression. Take P = 1570lb .

FHI =

Part C

Determine the force in members CJ of the truss, and state if the member is in tension or compression. Take P = 1570lb .

FCJ =

The speed of shaft C and its direction of rotation is 1160 rpm and C.C.W respectively.

The rate of distance travel is referred to as speed. The SI units for measuring speed are meters per second (m/s), but other units such as miles per hour (mph), kilometers per hour (km/h), centimeters per year (cm/yr), and feet per second (ft/s) can also be used.

Due to the fact that distance is the only factor taken into account, it is a scalar quantity. Speed will ALWAYS be positive and cannot ever be negative. In a car, the speedometer displays the distance traveled; even when going backward, the speedometer still displays a positive speed. Speed is measured by how far you go in a given amount of time.

Learn more about speed

https://brainly.com/question/13943409

#SPJ4

The statement " front-wheel-drive vehicles with strut suspensions typically have a higher SAI angle than rear-wheel-drive vehicles with short-long arm suspension. " is True.

What is SAI?

When viewed from the front of the car, SAI is the angle in degrees of the steering pivot line. This angle enables the vehicle to rise slightly when you turn the wheel away from a straight-ahead position when combined with the camber to create the included angle. The inward tilt of the suspension toward the center of the car is referred to as steering axis inclination. The SAI angle is created by drawing an imaginary line across the upper strut, lower ball joint, and another actual vertical line through the middle of the tire.

Because it causes the wheel spindle to slant downward somewhat as the wheel is turned, the Steering Axis Inclination (SAI) angle directly affects steering and handling.

To learn more about SAI, use the link given
https://brainly.com/question/28956959
#SPJ4

An implicit cursor is automatically created in procedural sql when the sql statement returns only one value.

In order to interact with and modify databases, programmers use SQL (Structured Query Language). Many businesses must learn SQL if they want to make the most of the mountains of data they collect. Here is all the information you need to know about accessing and modifying data using SQL.

Users can access specific data they need at any time by using SQL, which helps manage the information stored in databases.

Even though SQL is a straightforward programming language, it is incredibly strong. In actuality, SQL is capable of adding data to database tables, altering data in already-existing database tables, and deleting data from SQL database tables. SQL can also change the database structure by adding, deleting, and altering tables.

Learn more about SQL

https://brainly.com/question/25694408

#SPJ4

The best time delay rating for a fuse used in semiconductor circuits is standard.

What is a fuse?

A fuse is an electrical safety device that protects an electrical circuit against overcurrent in electronics and electrical engineering. An integral part of it is a metal wire or strip that melts under excessive current flow, blocking or interrupting the current. The service distribution panel contains fuses as an over-current safety measure.

It basically consists of a metal piece that melts when it gets too hot. In accordance with their use in various applications, fuses can be categorized as "One Time Only Fuse," "Resettable Fuse," "Current Limiting and Non-Current Limiting fuses," and "Current Limiting and Non-Current Limiting."

To learn more about a fuse, use the link given
https://brainly.com/question/29585696
#SPJ4

A double that is larger than 0 and less than 1 is what the Math.random() function produces. This number evaluates to a double that is more than or equal to 0 and less than 10 when multiplied by 10.

Similar to that, if you require random numbers between 5 and 10, you must call nextInt(5, 11), as 5 is inclusive but 11 is exclusive, and this will return any result between 5 and 10.

Math.random() The floating-point, pseudo-random number that is returned by the Math.random() function has a roughly uniform distribution over the range from larger than or equal to 0 to 1.

To know more about Math.random visit :-

https://brainly.com/question/17586272

#SPJ4

The uncompressed values from given data is s = 10 p(s) = 1/16

compressed file                                                                  uncompressed file

l=-(0.5 log 2 0.5)...= h bit/sample                                         2 bits sample

100,000 bits                                                                                     x bits

x bits ÷ 100000 bits = 2 bits/sample ÷ h bits sample

A data stream is the transmission of a series of coherent signals that have been digitally encoded to carry information. The sent symbols are often organized into a number of packets.

Data streaming is now commonplace. Any communication sent via the Internet is done so as a data stream. When speaking on a phone, the sound is transmitted as a data stream. Depending on the data format selected, Data Stream comprises several sorts of data. When determining the time of an event, attributes like the Timestamp attribute are helpful. An algorithmically encoded ID called "Subject ID" has been taken out of a cookie.

To learn more about Data Stream click here

brainly.com/question/14012546

#SPJ4

Using the knowledge in computational language in JAVA it is possible to write a code that Capture screen and edit video with filters, effects, music. You can draw on screen while recording, easily record phone screen with internal/external voice.

package com.exchange;

class Recv

{

private String lhs;

private String rhs;

private String error;

private String icc;

public Recv(

{

}

public String getLhs()

{

return lhs;

}

public String getRhs()

{

return rhs;

}

}

public class Convert extends HttpServlet {

   protected void processRequest(HttpServletRequest req, HttpServletResponse resp)

           throws ServletException, IOException {

       String query = "";

       String amount = "";

       String curTo = "";

       String curFrom = "";

       String submit = "";

       String res = "";

       HttpSession session;

       resp.setContentType("text/html;charset=UTF-8");

       PrintWriter out = resp.getWriter();

       /*Read request parameters*/

       amount = req.getParameter("amount");

       curTo = req.getParameter("to");

       curFrom = req.getParameter("from");

       try {

           query = "+ amount + curFrom + "=?" + curTo;

           URL url = new URL(query);

           InputStreamReader stream = new InputStreamReader(url.openStream());

           BufferedReader in = new BufferedReader(stream);

           String str = "";

           String temp = "";

           while ((temp = in.readLine()) != null) {

               str = str + temp;

           }

                 Gson gson = new Gson();

           Recv st = gson.fromJson(str, Recv.class);

           String rhs = st.getRhs();

                   StringTokenizer strto = new StringTokenizer(rhs);

           String nextToken;

           out.write(strto.nextToken());

           nextToken = strto.nextToken();

           if( nextToken.equals("million") || nextToken.equals("billion") || nextToken.equals("trillion"))

           {

               out.println(" "+nextToken);

           }

       } catch (NumberFormatException e) {

           out.println("The given amount is not a valid number");

       }

   }

   protected void doGet(HttpServletRequest request, HttpServletResponse response)

           throws ServletException, IOException {

       processRequest(request, response);

   }

   protected void doPost(HttpServletRequest request, HttpServletResponse response)

           throws ServletException, IOException {

       processRequest(request, response);

   }

   public String getServletInfo() {

       return "Short description";

   }// </editor-fold>

}

See more about JAVA at brainly.com/question/29897053

#SPJ1

In order to minimize interference, you should choose wireless channels that are as far apart as possible from the neighboring wireless network. In this case, you could use the 2.412 GHz, 2.442 GHz, and 2.472 GHz channels. These channels are at least 5 MHz apart from the neighboring network's channel, which should help to reduce interference.

Wireless channel optimization is the process of choosing the best channel for a wireless network to operate on. This is important because different channels can have different levels of interference, and selecting the best channel can improve the performance of the wireless network.

There are several factors that can affect the performance of a wireless channel, including the presence of other wireless networks, the distance between the devices, and the type of environment. To optimize a wireless channel, you can try the following steps:

Learn more about Wireless Channels Optimization, here https://brainly.com/question/28365848

#SPJ4

False. An optimistic approach is based on the assumption that the majority of database operations do conflict.

What is database?
A database is an organized collection of data stored in a computer system. It is composed of multiple tables of information, with relationships between them, and is typically used to store data that can be quickly accessed, managed, and updated. Databases are used in many different applications, such as online banking, e-commerce, data analysis, and decision making. They are especially important for businesses, as they provide a reliable, structured way of storing and retrieving data. Database management systems (DBMS) provide a means for creating and managing databases, and are essential for businesses that need to store and access large quantities of data. The data is organized into tables and can be queried in order to extract meaningful information. Databases are typically highly secure, as they contain valuable data that must be protected from unauthorized access.

To learn more about database
https://brainly.com/question/29418402
#SPJ4

Intrusion detection system/ Intrusion prevention system (IDS/IPS) was the based on the Says/Application domain, Remote access domain, LAN to WAN domain. Integrity/Availability is the CIA function(s).

Domains allude to the capacity to teach pupils to think critically by employing techniques that make the greatest sense to them. There are three types of domains: psychomotor, emotional, and cognitive.

There were the Information Security Applications and Defensive measures, Domain, and Cryptography. Remote access domain: private virtual networks (VPNs), laptops with VPN software, and SSL/VPN tunnels. System/Application domain: Hardware, operating system software, DBMS, client/server apps, and data that are often hosted in the data center and computer rooms of an enterprise.

Learn more about on domains, here:

https://brainly.com/question/28135761

#SPJ4

Here is the pseudocode for the recursive function:

def num_interpretations(decinput: str, index: int) -> int:

 # base case: if we have reached the end of the input string, return 1

 if index == len(decinput):

   return 1

 # try to decode the current digit as a single digit

 count = num_interpretations(decinput, index + 1)

 # try to decode the current digit and the next digit as a pair of digits

 if index + 1 < len(decinput) and decinput[index] != '0':

   count += num_interpretations(decinput, index + 2)

 return count

To use this function, we can call it with the input string and an initial index of 0:

decinput = "100200300"

count = num_interpretations(decinput, 0)

print(count)  # prints 4

To solve this problem, we can use a recursive approach. We can start from the first digit and try to decode it in two ways: as a single digit or as a pair of digits. If we decode it as a single digit, we can move to the next digit and try to decode it in the same way. If we decode it as a pair of digits, we can move two digits ahead and try to decode the next digit. We can continue this process until we have decoded all the digits in the input string.

Learn more about code, here https://brainly.com/question/497311

#SPJ4

Note that the option that is not a presentation software term is: "Speaker Image" (Option 2)

A presentation program (sometimes known as presentation software) is a software package used to display information as a slide show. It includes three key functions: an editor that allows text to be input and formatted, a search engine, and a calendar. a technique for adding and modifying visual graphics and media snippets.

Speaker Notes refers to notes that speakers can utilize to assist steer their presentation are referred to as speaker notes. They are usually hidden from the audience and serve as a reference for the speaker.

Learn more about Presentation Software:
https://brainly.com/question/2190614
#SPJ1

Bolting is used to assemble semi-hermetic compressors rather than welding. The primary distinction between hermetic and semi-hermetic compressors is this.

The crucial components of semi-hermetic compressors are housed in a cast iron housing. Even though they are still housed together, the motor and compressor are still accessible. Instead of the system failing completely, this enables maintenance checks and the repair or replacement of pieces as they deteriorate.

Centrifugal force causes the oil to flow, which lubricates hermetic compressors. While having an oil pump and what is known as forced lubrication, semi-hermetic compressors do not.

Gas pours into the area of low pressure through a suction valve input. The suction valve closes during the piston's upstroke, forcing the exhaust valve to open as a result of mounting pressure. The gas is compelled through the system's discharge, or high pressure, side after being compressed.

Know more about compressors here:

https://brainly.com/question/9131351

#SPJ4

There are a number of books in the HackerStudy collection that can help you build code using your understanding of Python's computational language.

the code will be

include<iostream>

using namespace std;

long getMaximumScore(int arr[],int k,int n)

{

long count=0,sum=0;

for(int i=0;i<n-1;i++)

{

for(int j=0;j<n-i-1;j++)

{

 if(arr[j+1]>arr[j])

 {

  arr[j+1]=arr[j+1]+arr[j];

  arr[j]=arr[j+1]-arr[j];

  arr[j+1]=arr[j+1]-arr[j];

 }

}

}

for(int i=0;i<n;i++)

{

if(count==k)

return sum;

else

{

 sum=sum+arr[i];

 count++;

}

}

}

int main()

{

int n,k;

cin>>n;

int arr[n];

for(k=0;k<n;k++)

cin>>arr[k]  ;

cin>>k;

cout<<getMaximumScore(arr,k,n);

return 0;

}

learn more about C++ here: https://brainly.com/question/20339175

#SPJ4

p=61.75W

(a)
use node a as reference and is shown in Figure 1
Apply KCL at super node  between b and c
=1.9+V^b/50+v^c/150+V^C?20+55=0
=v ^b/50+v^c/150+V^C/75=-1.9
=v^ b + v^ c=-1.9(50)
=v^ b +V^ C=-95.....(1)

From super node b and c,
v^ b-v ^c=30.....(2)

by solving equation 1 and 2
V^ b=-32.5V
V^ c=-62.5V

therefore the voltage V^ 0=-32.5V

(B) Apply KCL at node a.
-1.9+v^ a/50+v^ a- v^ c/150+v^a-v^c+20+55+0
V^ a/50+v^a-V^c/150+v^a-v^c/75=1.9
v^ a/50+v^a-v^c/50=1.9
v^ a+ v^ a - v^ c=1.9(50)
2V^ a -v^ c=95....(1)

put V^ c=-30v in equation(1)
2V^ a-(-30)=95
2V^ a=(95-30)
v^ a= 32.5V

From figure 2, the voltage v^ 0=-v^ a
therefore v^ 0=-32.5 V

(c)  power delivered by the 1.9 A current source is
p=iv^ 0
=(1.9)(-32.5)
=-61.75W
The negative sign indicates the power delivering by a source,

P=61.75W  

To learn more about node- voltage, click here    
https://brainly.com/question/29445057
#SPJ4                                  

Article 440 permits the disconnect switch for a large rooftop air conditioner to be mounted inside the unit.  

Disconnecting devices must be placed so that they are easily visible from and reachable from the cooling or heating equipment. Installing the disconnecting device on or inside the air-conditioning or refrigeration equipment is allowed. An HVAC system known as a packed rooftop unit, also known as an RTU, is a small unit that includes all the parts required to supply conditioned air. Packaged rooftop units are primarily used in small and large commercial applications. They are extremely well-liked by commercial and industrial properties.

To learn more about air-conditioner click here

brainly.com/question/13143746

#SPJ4

When an exception is thrown by code in its try block, the JVM begins searching the try statement for a catch clause that can handle it and passes control of the program to the first catch clause that can handle the exception.

In C#, a catch block is an optional section of code that is run after an exception is raised. The "catch" keyword is used in conjunction with the keywords "try" and "finally" to implement the catch block, which is a specific component of the exceptional handling construct and provides a method for implementing structured exception handling.

The code that is guarded and may result in an exception is included in a try block. It contains declarations that address exceptional situations and attempts to recover from such unforeseen circumstances.

The way to handle exceptions is formed by the catch block. The.NET run time may terminate the entire program if these issues are not resolved. For handling general or specific exceptions, use a catch block.

Learn more about catch block

https://brainly.com/question/14186450

#SPJ4

Using the knowledge in computational language in JAVA it is possible to write a code that  produces an error when trying to retrieve the formContext object by using the getFormContext method.

function commonEventHandler(executionContext) {

   var formContext = executionContext.getFormContext();    

   var telephoneAttr = formContext.data.entity.attributes.get('telephone1');

   var isNumberWithCountryCode = telephoneAttr.getValue().substring(0,1) === '+';

   // telephoneField will be a form control if invoked from a form OnChange event;

   // telephoneField will be a editable grid GridCell object if invoked from editable grid OnChange event.

   var telephoneField = telephoneAttr.controls.get(0);

   if (!isNumberWithCountryCode) {

       telephoneField.setNotification('Please include the country code beginning with '+'.', 'countryCodeNotification');

   }

   else {

       telephoneField.clearNotification('countryCodeNotification');

   }

}

function onstop(executionContext) {

   var formContext = executionContext.getFormContext();

   var stop = formContext.getAttribute("abs_onstop").getValue();

   if (stop == true)

   {

       formContext.ui.setFormNotification("This account has been placed ON STOP!", "WARNING", "OnStop");

   }

   else

   {

       formContext.ui.clearFormNotification("OnStop");

   }

}

See more about JAVA at brainly.com/question/29897053

#SPJ1

The Python code that can help in the Programming Exercise  is given below:

import math

def sphere_properties(radius):

 diameter = 2 * radius

 circumference = diameter * math.pi

 surface_area = 4 * math.pi * radius * radius

 volume = 4/3 * math.pi * radius * radius * radius

 print("Diameter: ", diameter)

 print("Circumference: ", circumference)

 print("Surface Area: ", surface_area)

 print("Volume: ", volume)

radius = float(input("Enter the radius of the sphere: "))

sphere_properties(radius)

The above code defines a function sphere_properties that takes the radius of the sphere as input and calculates the diameter, circumference, surface area, and volume of the sphere. The value of π is obtained from the math module.

Therefore, the function prints the values of the diameter, circumference, surface area, and volume of the sphere.

Learn more about Programming from

https://brainly.com/question/26497128

#SPJ1

Answer: modem then router

Explanation: the wireless signal you will get is from the router but to get that signal you need to have the modem working.

Answer:

Carcinogen conc. = 0.05 mg/m3

; Lung absorption factor =0.8; Breathing rate = 1m3

/hr

Carcinogen potency factor = 0.02 (mg/kg-day)

-1

Total exposure time = (2 hours/work day)×(5 days/week)×(50 weeks/year)×(20 years)

= 10000 hours

Exposed carcinogen concentration = (0.05 mg/m3

)×[ 1 m3

/h]× (10000 hours) = 500 mg

Absorbed carcinogens in lung = (0.8)×500 mg = 400 mg

Chronic daily intake of carcinogen through lung (CDI)

= (Exposed concentration)/(body weight× averaging time)

Here given body weight = 60 kg; Averaging time = 70 years

So, CDI= (400 mg)/(60 kg×70 years×365days/year) = 2.61 ×10-4 mg/(kg×day)

Lifetime incremental risk of cancer through inhalation of air = CDI×PF

=[2.61 ×10-4 mg/(kg×day)]×[ 0.02 (mg/kg-day)

-1

] =5.22×10-6 (> than the allowable lifetime

incremental risk of cancer, i.e., 10-6, and thus there is a concern.)

Explanation:

The program then outputs the total value of the coins in pennies.

The program:

#include<iostream>

using namespace std;

int main()

{

int quarters, dimes, nickels, total_cents;

  cout<<"Enter the number of quarters:\n";

  cin>>quarters;        

  cout<<"Enter the number of dimes:\n";

  cin >>dimes;

   cout <<"Enter the number of nickels:\n";

   cin>>nickels; total_cents = (quarters * 25) + (dimes * 10) + (nickels * 5);

   cout<<total_cents;  

 return 0;

}

How to take input by the user in C++ User input: To enable the user to input a value, use cin in combination with the extraction operator (>>). The variable containing the extracted data follows the operator.

To know more about  C++ :
https://brainly.com/question/27019258

#SPJ4

The correct answer to the given question about individual stationed outside one or more permit spaces is option b) Attendant.

In a wide range of venues, including hotels, restaurants, parking lots, outdoor facilities, and retail stores, attendants carry out a variety of activities related to customer care and assistance. They help customers, give information, and make sure everything runs smoothly. Keeping operational spaces clean and organized, keeping an eye on product inventory, and obtaining essential supplies are all duties of attendants. Helps patients with their daily activities of life by ambulating, rotating, and placing them as well as helping with meal preparation and feeding them as needed. In order to give visitors a welcoming and comfortable stay, room attendants are in charge of maintaining and cleaning guest rooms. Performing general and regular maintenance. Maintain the premises in a tidy and clean manner.

To learn more about attendants click here

brainly.com/question/15959245

#SPJ4

Python's computational language can be used to create a code whose first line comprises an integer containing the number of students.

The Python code that can conclude the number of the student  is gonna be as follows:

#include<bits/stdc++.h>

using namespace std;

const int Mx=1e5+5;

int par[Mx],cnt[Mx];

void ini(int n){

  for(int i=1;i<=n;++i)par[i]=i,cnt[i]=1;

}

int root(int a){

  if(a==par[a])return a;

  return par[a]=root(par[a]);

}

void Union(int a,int b){

  a=root(a);b=root(b);

  if(a==b)return;

  if(cnt[a]>cnt[b])swap(a,b);

  par[a]=b;

  cnt[b]+=cnt[a];

}

int* getTheGroups(int n,int q,int sz,string queryTypes[],int student1[],int student2[],int* ans){

  ini(n);

  int current=0;

  for(int i=0;i<q;++i){

      if(queryTypes[i]=="Friend"){

          Union(student1[i],student2[i]);

      }

      else{

          int x=root(student1[i]),y=root(student2[i]);

          if(x==y)ans[current++]=cnt[x];

          else ans[current++]=cnt[x]+cnt[y];

      }

  }

  return ans;

}

int main(){

  int n,q,sz=0;

  cin>>n>>q;

  string queryTypes[q];

  int student1[q],student2[q];

  for(int i=0;i<q;++i){

      cin>>queryTypes[i];

      if(queryTypes[i]=="Total")

          ++sz;

  }

  cin>>q;

  for(int i=0;i<q;++i)cin>>student1[i];

  cin>>q;

  for(int i=0;i<q;++i)cin>>student2[i];

  int ans[sz];

  int* ptr=getTheGroups(n,q,sz,queryTypes,student1,student2,ans);

  for(int i=0;i<sz;++i)

      cout<<ptr[i]<<endl;

  return 0;

}

See more about python at brainly.com/question/18502436

#SPJ4

On mountain roads, if you have __5__ or more vehicles behind you, you must use turnouts to let them pass.

Before passing a bus or truck, be sure you can see the driver in the side mirror. To safely and quickly pass the truck or bus, signal loudly, then move into the left lane and speed up. Stay out of the blind spot. In order to observe any items through the rear view glass on the right side and rear of the car, you should be backing up with your head pointed toward the right rear of your vehicle. Driving on two-way streets is simpler since you can readily observe the approaching cars. Never cross the centerline when you get close to a hill's top.

To learn more about mountain roads click the link below:

brainly.com/question/21065899

#SPJ4

A binary number is a number that is expressed using the base-2 numeral system or binary numeral system, a way of expressing numbers in mathematics that typically only employs the symbols "0" (zero) and "1." (one).

A numeral system, also known as a system of numeration, is a method of writing numbers; it is a type of mathematical notation used to consistently represent a set of numbers by using digits or other symbols.

In various numeral systems, the same set of symbols can represent various numbers. For instance, the number "11" stands for the numbers eleven in the decimal system, which is used in everyday life, three in the binary system, which is used in computers, and two in the unary system.

                             Binary                       Octal               Hexadecimal

1)       173              = 10101101₂                  = 255₈                = AD₁₆

2)      299.5         = 100101011.1000₂      = 453.4₈              = 12 B.8₁₆

3)      735.75        = 1011011111.1100₂       = 1337.6₈             = 2 DF.C₁₆

Learn more about binary

https://brainly.com/question/16612919

#SPJ4

The term "form" refers to an object's shape and structure, either in two dimensions (for example, a portrait painted on canvas) or in three dimensions (such as a statue carved from a marble block).

Form is an integral part of any artwork and can be used to convey emotion and meaning. Form can be used to create a sense of balance, contrast, and unity in a composition. In two dimensional works, form is typically created through the use of line, shape, and value. In three dimensional works, form is created through the use of volume, space, and texture. Form is an essential element of art and can be used to evoke a range of emotions and meanings.

Learn more about Objects shape and structure :

https://brainly.com/question/13902734

#SPJ4

To alter the program so that a valid password consists of 10 charac- ters, 6 of which must be digits and the other 4 letters.

A password is a group of characters used to verify a user's identity on a computer system. You might, for instance, need to log in to a computer account. You must enter a true username and password in order to access your account. The term "login" is frequently used to describe this combination. Passwords are private to each user, whereas usernames are typically public knowledge.

Most passwords are made up of a number of characters, which can typically include letters, numbers, and the majority of symbols but not spaces. While picking a password that is simple to remember is a good idea, you shouldn't make it so straightforward that anyone can figure it out.

//CODE//

#include <iostream>

#include <cstring>

#include <cctype>

// #include

using namespace std;

// function prototypes

bool testPassWord(char[]);

int countLetters(char *);

int countDigits(char *);

int main() {

char passWord[20];

cout << "Enter a password consisting of exactly 10 characters, 6 digits and the other 4 letters:"

<< endl;

cin.getline(passWord, 20);

if (testPassWord(passWord))

cout << "Please wait - your password is being verified" << endl;

else {

cout << "Please enter a password with exactly 10 letters, 6 digits and 4 other"<< endl;

cout << "For example, my1237Ru99jhsggs is valid" << endl;

}

// Fill in the code that will call countLetters and countDigits and will

// print to the screen both the number of

// letters and digits contained in the password.

cout << "There are " << countLetters(passWord)

<< " letters in the password.\n";

cout << "There are " << countDigits(passWord) << " digits in the password.\n";

if (countLetters(passWord) == 10 && countDigits(passWord) == 6 && strlen(passWord)==20) {

cout << "password: " << passWord << endl;

} else

cout << "So, password: " << passWord << endl;

system("PAUSE"); // Pause the system for a while

return 0;

}

//**************************************************************

// testPassWord

//

// task: determines if the word in the character array passed to it, contains

// //exactly 10 letters,  6 digits and 4 other letters.

// data in: a word contained in a character array

// data returned: true if the word contains 10 letters, 6 digits and 4 other letters

// digits, false otherwise

//

//**************************************************************

bool testPassWord(char custPass[]) {

int numLetters, numDigits, length;

length = strlen(custPass);

numLetters = countLetters(custPass);

numDigits = countDigits(custPass);

// Check valid password consists of 10 characters,6 of which must be digits

// and the other 4 letters

if (numLetters == 10 && numDigits == 6 && length == 20)

return true;

else

return false;

}

//**************************************************************

// countLetters

//

// task: counts the number of letters (both

// capital and lower case)in the string

// data in: a string

// data returned: the number of letters in the string

//

//**************************************************************

int countLetters(char *strPtr) {

int occurs = 0;

while (*strPtr != '\0') {

if (isalpha(*strPtr))

occurs++;

strPtr++;

}

return occurs;

}

//**************************************************************

// countDigits

//

// task: counts the number of digits in the string

// data in: a string

// data returned: the number of digits in the string

//

//**************************************************************

int countDigits(char *strPtr) {

int occurs = 0;

while (*strPtr != '\0') {

if (isdigit(*strPtr)) // isdigit determines if the character is a digit

occurs++;

strPtr++;

}

return occurs;

}

Learn more about passwords

https://brainly.com/question/15016664

#SPJ4

The correct answer is Internal Server Error an error occurred inside the server which prevented it from fulfilling the request.

The server encountered an unforeseen issue that prohibited it from processing the request, as indicated by the 500 (Internal Server Error) status code. A 500 internal server error, as the name implies, denotes a widespread problem with the server that supports the website. This most likely indicates that there is a problem or brief fault with the website's code. It denotes that the server was unable to process the request because to an unforeseen circumstance. When no other error code is appropriate, the server will often return this error. If IIS has to be restarted, the "Server error in '/' application" error message may appear. IIS may be restarted with IIS Manager. Click "Start" in the lower left-hand corner of your Remote Desktop connection, then "Administrative Tools."

To learn more about Internal Server Error click the link below:

brainly.com/question/29464513

#SPJ4