Overall question: What is the molality of
a 3.25 M aqueous solution of ethanol,
C2H5OH?
From previous steps, you know:
Moles of ethanol = 3.25 moles
Mass of solvent = 828 g
m = [?]
mol C₂H5OH
kg H₂O
Molality (mol/kg)
Enter

( I underlined the important part the rest is extra info that can help you understand)

Answer

Lithium is a metal (Alkali metal) it will donate one of its electrons to fluoride so then it becomes positively charged (cation).

(atoms are neutral because protons (p+) and electrons (e-) are equal taking one electron from an atom will make it positive)

Flouride is a nonmetal so it will accept the electron from lithium so then it becomes negatively charged (anion)

lithium is in group 1 so its charge is +1
Flouride is in group 17 so its charge is -1

both cancel each other so there are no subscripts

The statement that describes the motion of the squirrel between 5s and 8s is as follows: The squirrel's speed did not change (option C).

A graph in mathematics and statistics is a data chart (graphical representation of data) intended to illustrate the relationship between a set (or sets) of numbers (quantities, measurements or indicative numbers) and a reference set, whose elements are indexed to those of the former set(s) and may or may not be numbers.

According to this question, a graph is used to illustrate the relationship between the distance moved by a squirrel and the time it took it to move i.e. the journey of squirrel for a certain interval or period of time.

Based on the graph above, the speed increased with time up until 5 seconds, however, from 5seconds till 8 seconds, the speed of the squirrel remained constant i.e. did not change until it picked up again.

Therefore, option C is the correct description of the situation of the squirrel between 5s to 8s.

The options to the incomplete question are as follows:

A. The squirrel's speed increased

B. The squirrel's speed decreased

C. The squirrel's speed did not change

D. The squirrel moved backward

Learn more about graph at: https://brainly.com/question/17267403

#SPJ1

Answer:

Explanation:

In this figure, the six electronic structures represent the electron configurations of six different elements: Li, Be, B, C, N, and O. The correct electron configurations are shown in green, and the incorrect ones are shown in red.

In the electron configuration for Li (top left), the fault is that the 2s orbital is not completely filled. The correct electron configuration for Li should have two electrons in the 1s orbital and one electron in the 2s orbital.

In the electron configuration for Be (top center), the fault is that the 2s orbital is not completely filled. The correct electron configuration for Be should have two electrons in the 1s orbital and two electrons in the 2s orbital.

In the electron configuration for B (top right), the fault is that the 2s orbital is not completely filled. The correct electron configuration for B should have two electrons in the 1s orbital, two electrons in the 2s orbital, and three electrons in the 2p orbital.

In the electron configuration for C (bottom left), the fault is that the 2p orbital is not completely filled. The correct electron configuration for C should have two electrons in the 1s orbital, two electrons in the 2s orbital, and four electrons in the 2p orbital.

In the electron configuration for N (bottom center), the fault is that the 2p orbital is not completely filled. The correct electron configuration for N should have two electrons in the 1s orbital, two electrons in the 2s orbital, and five electrons in the 2p orbital.

In the electron configuration for O (bottom right), the fault is that the 2p orbital is not completely filled. The correct electron configuration for O should have two electrons in the 1s orbital, two electrons in the 2s orbital, and six electrons in the 2p orbital.

I hope this helps! Let me know if you have any questions or need further clarification.

Positively charged ions move from a salt bridge to the anode compartment in a galvanic cell, whereas negatively charged ions move from a salt bridge to a cathode compartment.

Galvanic or voltaic cells are two types of electrochemical devices that use chemical energy from spontaneous redox reactions to produce electricity. Convectional cell An electrochemical device known as a voltaic cell uses chemical reactions to produce electricity.

The electrical energy generated by the transfer of electrons during a redox reaction is used by galvanic cells to carry out practical electrical operations. Separating the oxidation / reduction half-reactions and connecting them with a wire makes it possible to collect the electron flow since the electrons must pass through the wire in order to move between the two half-reactions.

To know more about Galvanic Cell visit;

https://brainly.com/question/13031093

#SPJ4

The answer is D. moles x molar mass.

Number of moles divided by molecular weight equals the substance's mass.Since the question states that glucose has a molecular weight of 180.16, plugging in our calculations shows that we require 180.16 x 1.5 = 270.24 g of sugar.

There are numerous instruments available for determining mass in various settings.The utilization the gravitational interaction between things is one of them, along with balances and scales, measuring transducers, vibrating tubes sensors, Newtonian weight measurement devices, and balances and scales.

To know more about molar mass visit:

https://brainly.com/question/12127540

#SPJ4

As a result, aluminum interacts with oxygen gas to form aluminum oxide, which results in the chemical reaction 4Al+3O22Al2O3. oxygen gas.

At room temperature, oxygen is a gas that lacks all other flavors, smells, and colors. Molecular oxygen can be found in nature. To create dioxygen, often known as O2, two oxygen atoms form a covalent double bond. As a molecule, oxygen is typically present.

The reactive gas oxygen (O2) has no color or smell. A little under 21% of the oxygen is made up of it, which is the most common feature in the earth's crust and is primarily found in oxides, silica, and carbonates.

To know more about oxygen gas visit:

https://brainly.com/question/6669845

#SPJ4

The weight percent of each element in the compound. is given below.

The mass percent of C = 24%

The mass percent of H = 4%

The mass percent of Cl = 50%

The mass percent of N = 9.8%

The Mass percent of oxygen = 12.2%

The following formula is used to calculate the mass of each component element in a sample of the compound:

The weight of C:

In 1 mole of CO2, there is 1 mole of carbon.

In 0.138 g of CO2, there will be:

0.138 g / 44 g * 12 g = 0.0368 g

H's mass:

1 mole of H2O contains 2 moles of hydrogen.

0.0566 g of H2O will contain the following quantity of H:

0.0566 g / 18 * 2 * 1 = 0.00628 g

volume of Cl;

In 1 mole of AgCl, there is 1 mole of Cl.

In 0.251 g of AgCl, the mass of Cl will be:

0.251 g / 143.5 g * 35.5 g = 0.0621 g

N's mass:

In 1 mole of NH3, there is 1 mole of N.

In 0.251 g of NH3, the mass of N will be:

0.0238g / 17.0 g * 14 g = 0.0196 g

Each element's mass percentage will be:

Mass proportion of C:

mass percent is equal to 0.0368/0.15 * 100.

24% mass percent

Mass proportion of H:

mass percent is equal to 0.00628/0.15 * 100%.

4% mass percent

Cl mass percentage;

Mass proportion of Cl:

mass percent is equal to 0.0621/0.125 * 100%.

50% mass percentage

N mass percentage:

Mass percent is equal to 0.0196/0.2*100%.

9.8% mass percent

Oxygen mass percentage equals 100 minus (24 + 4 + 50 + 9.8)

oxygen mass percentage: 12.2%

Learn more about organic compound from

https://brainly.com/question/6279332
#SPJ1

The O-H bond is the strongest due to high electronegativity difference.

Bond energy, also known as mean bond enthalpy or average bond enthalpy in chemistry, is a measure of bond strength in a chemical bond. Bond energy is defined by the International Union of Pure and Applied Chemistry as the average value of the gas-phase bond-dissociation energy for all bonds of the same type within the same chemical species. The greater the difference in electronegativity, the greater the bond polarity and thus bond strength.

As the difference in the electronegativities of the bonded atoms grows, so does the bond dissociation energy. The electronegativity of the atoms in a compound influences the ionic bonds. More electronegative elements have a higher proclivity to form ionic character bonds with other elements.

To learn more about bond strength, here

https://brainly.com/question/20590677

#SPJ4

True. Electrolysis can be used to resolve hydrogenation pathways at palladium surfaces in a membrane reactor. It uses electro catalytic palladium membrane reactor.

Palladium surface membrane reactors use electricity to hydrogenate organic molecules at ambient temperature and pressure. These reaction conditions position ePMRs as a sustainable alternative to thermochemical hydrogenation which requires high-temperature and high-pressure reaction conditions. The electro catalytic palladium membrane reactor uses electrolysis and a hydrogen-selective palladium membrane to deliver reactive hydrogen to a catalyst surface in an adjacent compartment for reaction with an organic substrate. This process forms the requisite metal-hydride surface for hydrogenation chemistry but at ambient temperature and pressure and without a H2 source.

To learn more about Hydrogenation pathway please visit:

https://brainly.com/question/16024138

#SPJ4

Answer:

D. 1s²2s²2p 3s²3p6

Explanation:

The most chemically stable electron configuration is typically the one that has a full valence shell, which means that the outermost electron shell is completely filled with electrons. In this case, the electron configuration with a full valence shell is 1s²2s²2p 3s²3p6. This configuration is often called the "noble gas" configuration, because it is similar to the electron configuration of a noble gas, such as neon or argon, which are extremely stable and unreactive.

Answer:

less the number of electrons

Explanation:

electrons have a negative charge

complexes can be classified based on number of unpaired electron as follows square planar strong field: 2 unpaired electrons, octahedral weak field: 4 unpaired electrons, tetrahedral strong field: 2 unpaired electrons, octahedral strong field: 0 unpaired electrons, tetrahedral weak field: 4 unpaired electrons, square planar weak field: 4 unpaired electrons.

In a coordination complex, the number of unpaired electrons in the metal ion depends on the strength of the ligand field and the orientation of the ligands. Strong field ligands have a higher affinity for the d orbitals and can more effectively stabilize them, leading to a lower number of unpaired electrons in the metal ion.

Weak field ligands have a lower affinity for the d orbitals and do not stabilize them as effectively, leading to a higher number of unpaired electrons in the metal ion. The number of unpaired electrons also depends on the orientation of the ligands, with an octahedron (6 ligands) and a tetrahedron (4 ligands) leading to different numbers of unpaired electrons.

To know more about coordinate bond

https://brainly.com/question/23847201

#SPJ4

The mass percent of each element is:

mass percent of C is 24%

mass percent of H is 4%

mass percent of Cl is 50%

mass percent of N is 9.8%

Mass percent of oxygen is 12.2%

The mass of each of the constituent elements in a sample of the compound is determined as follows:

mass of C:

1 mole of C is present in 1 mole of CO₂

The mass of C in 0.138 g of CO₂ will be:

0.138 g / 44 g * 12 g = 0.0368 g

mass of H:

2 moles of H are present in 1 mole of H₂O

The mass of H present in 0.0566 g H₂O will be:

0.0566 g / 18 * 2 * 1 = 0.00628 g

mass of Cl;

1 mole of Cl is present in 1 mole of AgCl

The mass of Cl in 0.251 g of AgCl will be:

0.251 g / 143.5 g * 35.5 g = 0.0621 g

mass of N:

1 mole of N is present in 1 mole of NH₃

The mass of N in 0.251 g of NH₃ will be:

0.0238g / 17.0 g * 14 g = 0.0196 g

Mass percent of each element will be:

mass percent of C:

mass percent = 0.0368/0.15 * 100

mass percent = 24%

mass percent of H:

mass percent = 0.00628 / 0.15 * 100%

mass percent = 4%

mass percent of Cl;

mass percent of Cl:

mass percent = 0.0621 / 0.125 * 100%

mass percent = 50%

mass percent of N:

mass percent = 0.0196 / 0.2 * 100%

mass percent = 9.8%

Mass percent of oxygen = 100 - (24 + 4 + 50 + 9.8)

Mass percent of oxygen = 12.2%

Learn more about mass percent at: https://brainly.com/question/29565632

#SPJ1

The NaCl crystalline nature can be studied best at energies between 20.0 and 200 eV.

Examples of huge pile structures include bridges, anthills, skeletons, buildings, airplanes, beaver dams, and salt domes. The infrastructure of a human civilization is composed of the outcomes of construction, which are classified as buildings and non-building structures.

Structure is a noun or a verb, as was said before. I'm working on better time management so I won't be running behind schedule. I set up the agreement to keep our potential losses to a minimum. Use of the noun: The birds had created an impressive building out of sticks and other abandoned materials.

To know more about Structures visit:

https://brainly.com/question/25089140

#SPJ4

her new network is $80.20 billion

Given a mass of 14 g and a volume of 28 ml, the density in g/ml is

0.5 grams per cubic centimeter.

What is density in g/ml?

Density is the mass of a substance in relation to its volume. Despite the fact that the Latin letter ρ can also be used, the symbol for density that is utilized the most frequently is. The size of how tightly a cloth is packed together is called density. it's far characterized as the mass predictable with unit amount.

ρ = m/V, where m denotes the item's mass, V denotes its quantity, and m denotes its density.

According to the given question:

A material substance's density is defined as its mass per unit volume. D is density, M is mass, and V is volume, therefore the formula for density is d = M/V.

d = M/V :

- 14/28= 1/2 = 0.5 grams per cubic centimeter.

To know more about density visit :-

brainly.com/question/15164682

#SPJ4

The pair of coordination isomers is [Ni(NH3)3Br]Cl and [Ni(NH3)3Cl]Br.

A coordination complex is made up of a central atom or ion, which is usually metallic and is known as the coordination centre, and a ring of bound molecules or ions, which are known as ligands or complexing agents. Coordination complexes are found in many metal-containing compounds, particularly those containing transition metals.

The coordination sphere is made up of the central atom or ion and all ligands. The first coordination sphere is made up of the central atoms or ions and the donor atoms. The coordination number is the number of donor atoms attached to the central atom or ion. The most common coordination numbers are 2, 4, and 6, in particular.

To learn more about coordination complexes, here

https://brainly.com/question/29742379

#SPJ4

One dose of antiacid A will neutralize more stomach acid (0.019 mol) than one dose of antacid B (0.01 mol).

Stomach acid is HCl. The reaction of HCl with each of the active ingredients of the antiacids is expressed in the following equations:

[tex]3HCl + Al(OH)_3 --- > AlCl_3 + 3H_2O[/tex].......................Eqn 1

[tex]2HCl +CaCO_3 --- > CaCl_2 + H_2O + CO_2[/tex]...................Eqn 2

In equation 1, the mole ratio of stomach acid to [tex]Al(OH)_3[/tex] is 3:1.

Mole of 0.50 g  [tex]Al(OH)_3[/tex] = 0.5/78 = 0.0064 mol

The equivalent amount of stomach acid to be neutralized = 0.0064 x 3 = 0.0192  mol

In equation 2, the mole ratio of stomach acid to [tex]CaCO_3[/tex] is 2:1.

Mole of 0.50 g  [tex]CaCO_3[/tex] = 0.5/100 = 0.005

The equivalent amount of stomach acid to be neutralized = 0.005 x 2 = 0.01 mol.

Thus, one dose of antiacid A will neutralize more stomach acid (0.019 mol) than one dose of antacid B (0.01 mol).

More on stoichiometric problems can be found here: https://brainly.com/question/23742235

#SPJ1

BaSO4 (s) + Cu(NO3)2 (aq)  and KCl (s) + Mg3(PO4)2 (s) is the product of given precipitation reactions.

Ba(NO3)2 (aq) + CuSO4 (aq) → BaSO4 (s) + Cu(NO3)2 (aq)

 K3 PO4 (aq) + MgCl2 (aq) → KCl (s) + Mg3(PO4)2 (s)

To learn more about precipitation reactions refer :

https://brainly.com/question/28182226

#SPJ1

The given statement is correct. What atom we are looking at is determined by the number of protons.

The atomic number of an element is equal to the number of protons in an atom. Use oxygen as an example. The periodic table states that oxygen has an atomic number of eight. The element's symbol is placed above the atomic number.

A neutral atom has the same number of protons and electrons as protons. The total of the protons and neutrons with in atom's nucleus determines its mass, which is denoted by the letter M. The number of neutrons is equivalent to the discrepancy between the atomic number and the mass number of the atom (M) (Z).

To know more about protons visit

brainly.com/question/12535409

#SPJ4

that the number of collisions depends on the energy, of the number of reactant particles, not their orientation.

Energy is referred to by scientists as the capacity for work.People have figured out how to transform energy from one type to the other and use it to accomplish tasks, making modern civilization possible.

boosts employee confidence and enables new hires to settle in more quickly; results in a more efficient and successful staff; increases employee retention; andencourages dialogue between the new employee and the supervisor.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ4

In order to create a crystalline lattice of alternate cations and anions from the blank ions, lattice energy is required.

The lattice energy increases with increasing ion charge. The implication of this is that ions with higher charge values will result in ionic compounds with higher lattice energies. The lattice energies of the compounds that include ions with lesser charges are thus reduced.

Ionic radii and lattice energy are inversely related. The gap between the positive and negative charges widens as ionic radii rise. As a result, the potential energy is less negative. Lattice energy thus declines.

To know more about lattice energy visit:-

https://brainly.com/question/29441166

#SPJ4

question:-

What is lattice energy?

Answer:

for reducing your landfill contribution

Reduce and reuse: The most obvious and easiest way to reduce your landfill contribution is by reducing and reusing as much as possible. ...

1,Recycle: ...

2,Compost: ...

3,Electric or gas dryer: ...

4,Drive less: ...

5,Reusable water bottle: ...

6,Plant a tree: ...

7,Recycle electronics

There are several ways you can reduce the amount of waste you send to landfills:

Reduce your consumption: One of the most effective ways to reduce waste is to simply consume less. This can involve reducing your use of single-use plastics, choosing products with minimal packaging, and opting for products that are made to be reused or recycled.

Recycle: Recycling is a process that converts waste materials into new products. By recycling, you can help to conserve natural resources and reduce the amount of waste that goes to landfills.

Compost: Composting is the process of breaking down organic material, such as food waste and yard trimmings, into a soil-like substance called compost. This can be used to enrich the soil and help plants grow.

Donate or sell gently used items: Rather than throwing away gently used items, consider donating them to a thrift store or selling them online. This can help to extend the life of these items and reduce the amount of waste that ends up in landfills.

Reuse: Look for ways to reuse items rather than throw them away. For example, you can use a reusable water bottle instead of disposable plastic bottles, or bring a reusable bag to the grocery store instead of using plastic bags.

Learn more about Chemical landfills here: https://brainly.com/question/9085477

Answer:

Orientation in space.

Explanation:

I had a similar question.

To solve this, we must be knowing each and every concept related to bond enery and enthalpy o formation. Therefore, the correct option is option C among all the given options.

Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances. Internal energy is the sum of all kinds of energy that the particles of a matter can possess, for example translational energy. Rotational energy.

Bond energy is directly proportional to the bond strength. since the bond enthalpy of H-F is the highest among all the given bond energy. H-F has the largest enthalpy of formation.

Therefore, the correct option is option C.

To know more about enthalpy, here:

https://brainly.com/question/24170335

#SPJ4