Organelle X is a -
A.
mitochondrion, which makes energy for the cell.
B.
ribosome, with carries proteins within the cell.
C.
centriole, which helps divide the cell in two.
D
lysosome, which helps digest substances inside the cell.

Answer:

[tex]\boxed {\boxed {\sf a= \frac {2}{5} \ or \ 0.4 \ m/s^2}}[/tex]

Explanation:

Acceleration is found by dividing the change in velocity by the time. The formula is:

[tex]a= \frac {v_f-v_i}{t}[/tex]

where [tex]v_f[/tex] is the final velocity, [tex]v_i[/tex] is the initial or starting velocity, and [tex]t[/tex] is the time.

Her velocity changes from 2 meters per second to 4 meters per second in the 5 seconds. Therefore:

[tex]v_f= 4 \ m/s \\v_i= 2 \ m/s \\t=5 \ s[/tex]

Substitute the values into the formula.

[tex]a= \frac { 4 \ m/s- 2 \ m/s}{5 \ s}[/tex]

Solve the numerator and subtract.

[tex]a= \frac { 2 \ m/s}{5 \ s}[/tex]

Divide.

[tex]a= \frac{2}{5} \ m/s/s= \frac{2}{5} \ m/s^2[/tex]

This can also be written as a decimal.

[tex]a=0.4 \ m/s^2[/tex]

Her average acceleration during the last 5 seconds of the race is 2/5 or 0.4 meters per square second.

Answer:

Here

Initial velocity = 2 m/s

Final velocity = 4 m/s

Time = 5 sec

v = u + at

4 = 2 + a(5)

4 - 2 = a(5)

2 = 5a

2/5 = a

Hence, acceleration is 2/5 m/s²

We want to solve Q = mcΔT for the liquid water; its change in temperature will tell us the amount of thermal energy that flowed out of the reaction. The specific heat, c, of water is 4.184 J/g °C.

Q = (72.0 g)(4.184 J/g °C)(100 °C - 25 °C) = 22593.6 J

Q ≈ 2.26 × 10⁴ J or 22.6 kJ (three significant figures).

Answer:

F

T

F

T

Explanation:

i hope these are right

Answer:

[tex]N_{2}O_{5}[/tex]

Explanation:

usually, the first step is to calculate the moles but since that is already given in the question we can move onto the next step

least molar ratio:

N = [tex]\frac{1}{1}[/tex] = 1

O = [tex]\frac{2.5}{1}[/tex] = 2.5

when the answer is in decimals we will multiply it by an integer in order to make it a whole number (in this case 2)

O = 2.5(2) = 5

in order to balance, we will also multiply the atoms of N by the same integer

N = 1(2) = 2

thus, the empirical formula is [tex]N_{2}O_{5}[/tex]

Answer:

B

Explanation:

Explanation:

You will have to rewrite this in your own words please. Download the app Paraphrase and also download Plagiarism Checker. Go on Paraphrase first and write it out then go to Plagiarism second and it'll tell you if you still need to reword it.

Answer:

A nuclear reactor produces electricity in much the same way other power plants do. The chain reaction produces the energy, which turns water into steam. The pressure of the steam turns a generator, which produces electricity.

Explanation:

Nuclear energy originates from the splitting of uranium atoms a process called fission. In nuclear fission, atoms are split apart to form smaller atoms, releasing energy. Fission takes place inside the reactor of a nuclear power plant. At the center of the reactor is the core, which contains uranium fuel. The uranium fuel is formed into ceramic pellets. Inside each uranium fuel pellet, there are millions of uranium nuclei. When these nuclei are split, a huge amount of energy is released. Some of this energy is from radiation, but the biggest source is kinetic energy. This is the energy that produces heat inside a reactor. The heat produced during nuclear fission in the reactor core is used to boil water into steam, which turns the blades of a steam turbine. As the turbine blades turn, they drive generators that make electricity. Nuclear plants cool the steam back into water in a separate structure at the power plant called a cooling tower, or they use water from ponds, rivers, or the ocean. The cooled water is then reused to produce steam.

Nitrogen transmutes to form an isotope of oxygen. The superscript for oxygen is 17

The subscript for hydrogen is 1

Cobalt-59 accepts a neutron to form a new isotope. The subscript for cobalt is 27

Answer:

Oxygen = 17

Hydrogen = 1

Cobalt = 27

Explanation:

Answer:

The concentration will be "[tex]1.88\times 10^5 \ ppm[/tex]".

Explanation:

The given values are:

Mass of solute (KNO₃),

= 15.0 grams

Mass of solvent (H₂O),

= 65.0 grams

The concentration will be:

=  [tex]\frac{Mass \ of \ solute}{Mass \ of \ solution}\times 10^6[/tex]

On substituting the values, we get

=  [tex]\frac{15.0}{65.0+15.0}\times 10^6[/tex]

=  [tex]\frac{15.0}{80}\times 10^6[/tex]

=  [tex]0.1875\times 10^6[/tex]

=  [tex]187500 \ ppm[/tex]

or,

=  [tex]1.88\times 10^5 \ ppm[/tex]

Answer:

a. Sn or Si ⇒ Sn

b. Br or Ga ⇒ Ga

c. Sn or Bi ⇒ similar in size

d. Se or Sn ⇒ Sn

Explanation:

The larger atom has a larger atomic radius. We have to consider how varies the atomic radius for chemical elements in the Periodic Table. In a group (column), the atomic radius increases from top to bottom while in a period (file), it increases from right to left.

a. Sn or Si ⇒ Sn

They are in the same group. Sn is on the top, so it has a larger atomic radius.

b. Br or Ga ⇒ Ga

They are in the same period. Ga is located at the left so it has a larger atomic radius.

c. Sn or Bi ⇒ similar

They are not in the same group neither the same period. Bi is located more at the bottom, so it would be larger than Sn, but Bi is also at the right side, so it would be smaller than Bi. Thus, they have comparable sizes.

d. Se or Sn⇒ Sn

They are not in the same group neither the same period. Se is located at the top and right side compared to Sn, so Sn is the larger atom.

Answer:

Newton's second law of motion

F = ma

Answer:

the same is what is this question like what did u exame

Answer:

B- Increase

Explanation:

In the event that the temperature is increased, the normal speed and dynamic energy of the gas atoms increment. In the event that the volume is held steady, the sped up the gas particles brings about more incessant and more powerful crashes with the dividers of the compartment, hence expanding the pressing factor

Answer:

3rd law

Explanation:

when two objects interact, they apply forces to each other of equal magnitude and opposite direction.

Answer:

The equilibrium position shifts to the right.

This is due to excess carbon dioxide which supresses the reaction.

Answer:

  2 Atm; 2.016 g

Explanation:

Changing the volume without changing the temperature or mass only changes the pressure. Volume and pressure are inversely proportional so halving the volume will double the pressure.

P = 1 Atm, T = 0 °C are "standard" temperature and pressure (STP). The volume of 1 mole of gas is 22.4 L under these conditions. That means the amount of hydrogen gas in the cylinder is 1 mole, so has a mass of 2.016 g.

After the volume reduction, the pressure is 2 Atm, and the mass remains 2.016 g.

Answer:

Explanation:

hope it helps

A pH meter will make short work of identifying the pH of your solution. These meters have a glass probe that measures a solution's ion concentration. To use a pH meter, place a small portion of your solution in a beaker or test tube, rinse the probe of the pH meter, and then place the probe into your solution.

Source:

https://sciencing.com/identify-solution-neutral-base-acidic-8346.html

pH depend on the temperature. At room temperature pH scale is between 0 to 14. pH of neutral solution is 7. pH meter is the only instrument to measure the pH of an unknown solution.

pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. More the value of hydronium ion concentration, more will be the solution acidic.

On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution.

pH meter is used to measure the pH of an unknown solution. A glass probe is attached to pH meters, that measure the concentration of hydrogen ion in unknown solution. Take the unknown solution in the beaker and then put the washed, clean glass probe in the solution. Now wait for a second to take the reading.

Therefore, pH meter is the only instrument to measure the pH of the solution.

To learn more about pH, here:

https://brainly.com/question/27945512

#SPJ2

Answer:

11.9 g of nitrogen monoxide

Explanation:

We'll begin by calculating the number of mole in 6.75 g of NH₃. This can be obtained as follow:

Mass of NH₃ = 6.75 g

Molar mass of NH₃ = 14 + (3×1)

= 14 + 3

= 17 g/mol

Mole of NH₃ =?

Mole = mass /molar mass

Mole of NH₃ = 6.75 / 17

Mole of NH₃ = 0.397 mole

Next, we shall determine the number of mole of NO produced by the reaction of 0.397 mole of NH₃. This can be obtained as follow:

4NH₃ + 5O₂ —> 4NO + 6H₂O

From the balanced equation above,

4 moles of NH₃ reacted to produce 4 moles of NO.

Therefore, 0.397 mole of NH₃ will also react to produce 0.397 mole of NO.

Finally, we shall determine the mass of 0.397 mole of NO. This can be obtained as follow:

Mole of NO = 0.397 mole

Molar mass of NO = 14 + 16 = 30 g/mol

Mass of NO =?

Mass = mole × molar mass

Mass of NO = 0.397 × 30

Mass of NO = 11.9 g

Thus, the mass of NO produced is 11.9 g

Answer:

19.45g of Cu are expect to be produced

Explanation:

Based on the reaction:

2Ni + 3CuCl2 → 3Cu + 2NiCl3

2 moles of Ni react with 3 moles of CuCl2 to produce 3 moles of Cu

To solve this question we must find the moles of each reactant in order to find the limiting reactant. With the limiting reactant we can find the moles of Cu produced and the mass as follows:

Moles Ni -Molar mass: 58.6934g/mol-

12.00g * (1mol / 58.6934g) = 0.204 moles Ni

Moles CuCl2 -Molar mass: 134.45g/mol-

42.00g * (1mol / 134.45g) = 0.312 moles CuCl2

For a complete reaction of 0.204 moles of Ni are required:

0.204 moles Ni * (3 moles CuCl2 / 2 moles Ni) = 0.306 moles of CuCl2

As there are 0.312 moles, CuCl2 is the excess reactant and Ni is limiting reactant.

Moles Cu:

0.204 moles Ni * (3moles Cu / 2 moles Ni) = 0.306 moles of Cu are produced

Mass Cu:

0.306 moles of Cu * (63.546g / mol) =

Answer: Beta decay occurs when a nucleus is unstable because it has too many or too few neutrons relative to protons. The nucleus emits a beta particle and energy.  In beta-minus decay, a neutron breaks down to a proton and an electron, and the electron is emitted from the nucleus.

Explanation:

Answer:

4.90 x 10 24 atoms

Explanation:

the 24 is the exponent for the 10

Answer:

1/wavelength

c=1/alpha

Answer:

red dwarf

Explanation:

Answer:

D

Explanation:

Answer:

it will a i did the quiz got it all right

Explanation:

Answer:

two smaller, more stable nuclei

Explanation:

A. two smaller, more stable nuclei

Nuclear fission is the process in which a heavy nucleus is split into two large fragments of comparable mass to form more stable and smaller nuclei. This results in the release of great amounts of energy. Large nuclei are usually less stable, since it takes more energy to hold its structure together, the larger they are.

Here's a photo of Edge just incase.

Answer:

They all end up in the oceon

Explanation:

Answer:

ok

Explanation:

i think they will all end up in ocean

Answer:

116.88g of table salt (NaCl) contains two formula units

Explanation:

Now,

We know that 1 formula unit of sodium chloride has a molar mass of 58.44g/mol

Hence;

Mass of 1 formula unit = 58.44g

Mass of x formula units = 116.88g

x = 116.88g * 1 formula unit/58.44g

x = 2 formula units

Therefore;

116.88g of table salt (NaCl) contains two formula units

Answer:

There are  1.2044 × 10²⁴ formula units of NaCl in 116.88 g of table salt (NaCl)

Explanation:

A formula unit is an empirical formula of the smallest collection or number of atoms in an ionic or covalent combination from which a compounds formula can be established and which are used to represent the compound stoichiometrically

Sodium chloride is an ionic compound and is represented by the formula unit NaCl as it composed of ions and is not therefoe represented by a molecular formula

The given mass of the table salt, NaCl = 116.88 g

The molar mass of NaCl = 58.44 g/mol = The mass of 1 mole of NaCl

1 mole of NaCl contains one Avogadro's number or 6.022 × 10²³ formula units of NaCl,

∴ 58.44 g of NaCl contains 6.022 × 10²³ formula units of NaCl

116.88 g of NaCl will have (116.88/58.44) × 6.022 × 10²³ = 1.2044 × 10²⁴ formula units of NaCl

The number of formula units of NaCl in 116.88 g of table salt (NaCl) =  1.2044 × 10²⁴ formula units of NaCl.

Answer:

4.5M

Explanation:

Here is why:

Answer:

Response is below

Explanation:

The different types of mining are underground, surface, placer, and in-situ. Underground mining uses various materials to excavate resources from beneath the surface of the Earth. Surface mining is a category of mining that in which soil and rock overlying the mineral deposit are removed. Placer mining is the mining of stream bed deposits for minerals. In-situ mining is a mining process used to recover minerals such as copper and uranium through boreholes drilled into a deposit.